Fix typos

Change-Id: I338dacd3cfe915714a9038e1dea4a60d586e9394
Reviewed-on: https://gerrit.libreoffice.org/34806
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

19 files changed, 25 insertions, 25 deletions

diff --git a/editeng/source/editeng/editview.cxx b/editeng/source/editeng/editview.cxx
index e328805895ff..ff4af8aef83a 100644
--- a/editeng/source/editeng/editview.cxx
+++ b/editeng/source/editeng/editview.cxx
@@ -840,7 +840,7 @@ void EditView::ExecuteSpellPopup( const Point& rPosPixel, Link<SpellCallbackInfo
         // Note: That could of course be done by clipping the
         // resulting sequence but the current third party
         // implementations result differs greatly if the number of
-        // suggestions to be retuned gets changed. Statistically
+        // suggestions to be returned gets changed. Statistically
         // it gets much better if told to return e.g. only 7 strings
         // than returning e.g. 16 suggestions and using only the
         // first 7. Thus we hand down the value to use to that
diff --git a/editeng/source/editeng/edtspell.cxx b/editeng/source/editeng/edtspell.cxx
index 887e8141bcc4..dee67164f66e 100644
--- a/editeng/source/editeng/edtspell.cxx
+++ b/editeng/source/editeng/edtspell.cxx
@@ -127,7 +127,7 @@ bool EditSpellWrapper::SpellMore()
         SetCurTextObj( nullptr );
         if ( bMore )
         {
-            // The text has been entered into the engine, when backwords then
+            // The text has been entered into the engine, when backwards then
             // it must be behind the selection.
             pEditView->GetImpEditView()->SetEditSelection(
                         pEE->GetEditDoc().GetStartPaM() );
diff --git a/embeddedobj/source/msole/olecomponent.cxx b/embeddedobj/source/msole/olecomponent.cxx
index 2cea0ca4b600..acfc61802d7d 100644
--- a/embeddedobj/source/msole/olecomponent.cxx
+++ b/embeddedobj/source/msole/olecomponent.cxx
@@ -1549,7 +1549,7 @@ uno::Any SAL_CALL OleComponent::getTransferData( const datatransfer::DataFlavor&
             }
         }
 
-        // If the replacement could not be retrieved, the cached representaion should be used
+        // If the replacement could not be retrieved, the cached representation should be used
         // currently it is not necessary to retrieve it here, so it is implemented in the object itself
     }
     // TODO: Investigate if there is already the format name
diff --git a/extensions/source/ole/unoobjw.cxx b/extensions/source/ole/unoobjw.cxx
index d8d0d1944122..0262723d5eeb 100644
--- a/extensions/source/ole/unoobjw.cxx
+++ b/extensions/source/ole/unoobjw.cxx
@@ -578,7 +578,7 @@ static bool writeBackOutParameter2( VARIANTARG* pDest, VARIANT* pSource)
         {
             // We use IDispatchEx because its GetDispID function causes the creation
             // of a property if it does not exist already. This is convenient for
-            // out parameters in JScript. Then the user must not specify propery "0"
+            // out parameters in JScript. Then the user must not specify property "0"
             // explicitly
             CComQIPtr<IDispatchEx> spDispEx( spDispDest);
             if( spDispEx)
diff --git a/extensions/source/propctrlr/sqlcommanddesign.cxx b/extensions/source/propctrlr/sqlcommanddesign.cxx
index bf006b994795..d17bd3312531 100644
--- a/extensions/source/propctrlr/sqlcommanddesign.cxx
+++ b/extensions/source/propctrlr/sqlcommanddesign.cxx
@@ -300,11 +300,11 @@ namespace pcr
 
     void SQLCommandDesigner::impl_closeDesigner_nothrow()
     {
-        OSL_PRECOND( isActive(), "SQLCommandDesigner::impl_closeDesigner_nothrow: invalid calle!" );
+        OSL_PRECOND( isActive(), "SQLCommandDesigner::impl_closeDesigner_nothrow: invalid call!" );
         // close it
         try
         {
-            // do not listen anymore ....
+            // do not listen anymore...
             Reference< XPropertySet > xProps( m_xDesigner, UNO_QUERY );
             if ( xProps.is() )
                 xProps->removePropertyChangeListener( PROPERTY_ACTIVECOMMAND, this );
diff --git a/extensions/source/propctrlr/stringrepresentation.cxx b/extensions/source/propctrlr/stringrepresentation.cxx
index cdba91af4fa0..3f8b0abfa697 100644
--- a/extensions/source/propctrlr/stringrepresentation.cxx
+++ b/extensions/source/propctrlr/stringrepresentation.cxx
@@ -125,7 +125,7 @@ private:
 
     /** converts a string into his constant value if it exists, otherwise the type converter is used.
     * \param _rValue the value to be converted
-    * \param _ePropertyType the type of the propery to be converted into
+    * \param _ePropertyType the type of the property to be converted into
     * \return the converted value
     */
     uno::Any convertStringToSimple( const OUString& _rValue,const uno::TypeClass& _ePropertyType );
diff --git a/external/redland/rasqal/rasqal.h b/external/redland/rasqal/rasqal.h
index a8d9b4a4306e..903a5a67a735 100644
--- a/external/redland/rasqal/rasqal.h
+++ b/external/redland/rasqal/rasqal.h
@@ -2010,7 +2010,7 @@ typedef enum {
  * @version: API version - only V1 is defined for now
  * @query: Source for this query.
  * @user_data: Context user data passed into the factory methods.
- * @init_triples_match: Factory method to initalise a new #rasqal_triples_match.
+ * @init_triples_match: Factory method to initialize a new #rasqal_triples_match.
  * @triple_present: Factory method to return presence or absence of a complete triple.
  * @free_triples_source: Factory method to deallocate resources.
  * @support_feature: Factory method to test support for a feature, returning non-0 if supported
diff --git a/extras/source/glade/libreoffice-catalog.xml.in b/extras/source/glade/libreoffice-catalog.xml.in
index 6fea54ad7ebc..017945162449 100644
--- a/extras/source/glade/libreoffice-catalog.xml.in
+++ b/extras/source/glade/libreoffice-catalog.xml.in
@@ -834,7 +834,7 @@
     <glade-widget-class title="Button with small padding" name="vcllo-SmallButton"
                         generic-name="SmallButton" parent="GtkButton"
                         icon-name="widget-gtk-button"/>
-    <glade-widget-class title="Horizontal box hiding childs depending on its priorities" name="sfxlo-PriorityHBox"
+    <glade-widget-class title="Horizontal box hiding children depending on its priorities" name="sfxlo-PriorityHBox"
                         generic-name="PriorityHBox" parent="GtkBox"
                         icon-name="widget-gtk-box"/>
     <glade-widget-class title="Table Design Control" name="sdlo-TableDesignBox"
@@ -849,7 +849,7 @@
     <glade-widget-class title="Notebookbar ToolBox" name="sfxlo-NotebookbarToolBox"
                         generic-name="Notebookbar ToolBox" parent="sfxlo-SidebarToolBox"
                         icon-name="widget-gtk-toolbar"/>
-    <glade-widget-class title="Vertical box hiding childs depending on context" name="sfxlo-ContextVBox"
+    <glade-widget-class title="Vertical box hiding children depending on context" name="sfxlo-ContextVBox"
                         generic-name="ContextVBox" parent="GtkBox"
                         icon-name="widget-gtk-box"/>
     <glade-widget-class title="Managed Menu Button" name="svtlo-ManagedMenuButton"
diff --git a/filter/qa/complex/filter/misc/FinalizedMandatoryTest.java b/filter/qa/complex/filter/misc/FinalizedMandatoryTest.java
index 7a21732a6c77..a0bcdcb9921d 100644
--- a/filter/qa/complex/filter/misc/FinalizedMandatoryTest.java
+++ b/filter/qa/complex/filter/misc/FinalizedMandatoryTest.java
@@ -186,7 +186,7 @@ public class FinalizedMandatoryTest
             // 1a.) try to change the filter in the container
             xNR.replaceByName(filterName, instance);
 
-            // 1b.) try to wirte the changed filter to the configuration.
+            // 1b.) try to write the changed filter to the configuration.
             // This must result in a exception if the filter is finalized.
             boolean flushError = false;
             try
@@ -205,7 +205,7 @@ public class FinalizedMandatoryTest
 
             // 2a.) try to remove the filter from the container
             xNC.removeByName(filterName);
-            // 1b.) try to wirte the changed filter to the configuration.
+            // 1b.) try to write the changed filter to the configuration.
             // This must result in a exception if the filter is mandatory
             flushError = false;
             try
diff --git a/filter/source/graphicfilter/icgm/cgmtypes.hxx b/filter/source/graphicfilter/icgm/cgmtypes.hxx
index 8a6689d40ba2..a245ebcbf3b2 100644
--- a/filter/source/graphicfilter/icgm/cgmtypes.hxx
+++ b/filter/source/graphicfilter/icgm/cgmtypes.hxx
@@ -105,14 +105,14 @@ enum TextAlignmentV     { TAV_NORMAL = 0, TAV_TOP = 1, TAV_CAP = 2, TAV_HALF = 3
 enum UnderlineMode      { UM_OFF = 0, UM_LOW = 1, UM_HIGH = 2, UM_STRIKEOUT = 4, UM_OVERSCORE = 8 };
 enum FinalFlag          { FF_NOT_FINAL = 0, FF_FINAL = 1 };
 
-enum LineType           { LT_SOLID = 1, LT_DASH = 2, LT_DOT = 3, LT_DASHDOT = 4, LT_DASHDOTDOT = 5,     // Standart
+enum LineType           { LT_SOLID = 1, LT_DASH = 2, LT_DOT = 3, LT_DASHDOT = 4, LT_DASHDOTDOT = 5,     // Standard
                             LT_NONE = -4, LT_DOTDOTSPACE = -3, LT_LONGDASH = -2, LT_DASHDASHDOT = -1 }; // GDSF Styles
 enum SpecMode           { SM_ABSOLUTE = 0, SM_SCALED = 1 };
 enum LineCapType        { LCT_BUTT = 0, LCT_ROUND = 1, LCT_SQUARE = 2, LCT_TRIANGLE = 3, LCT_ARROW = 4, LCT_NONE = -1 };
 enum LineJoinType       { LJT_MITER = 0, LJT_ROUND = 1, LJT_BEVEL = 2, LJT_NONE = -1 };
 
 
-enum EdgeType           { ET_SOLID = 1, ET_DASH = 2, ET_DOT = 3, ET_DASHDOT = 4, ET_DASHDOTDOT = 5,     // Standart
+enum EdgeType           { ET_SOLID = 1, ET_DASH = 2, ET_DOT = 3, ET_DASHDOT = 4, ET_DASHDOTDOT = 5,     // Standard
                             ET_NONE = -4, ET_DOTDOTSPACE = -3, ET_LONGDASH = -2, ET_DASHDASHDOT = -1 }; // GDSF Styles
 enum EdgeVisibility     { EV_OFF = 0, EV_ON = 1 };
 
diff --git a/filter/source/svg/svgexport.cxx b/filter/source/svg/svgexport.cxx
index 3bf9c6cffa57..21e4da0fcff6 100644
--- a/filter/source/svg/svgexport.cxx
+++ b/filter/source/svg/svgexport.cxx
@@ -739,7 +739,7 @@ bool SVGFilter::implExportDocument()
         mpSVGExport->AddAttribute( XML_NAMESPACE_NONE, "height", aAttr );
     }
 
-    // #i124608# set viewBox explicitely to the exported content
+    // #i124608# set viewBox explicitly to the exported content
     if (mbExportShapeSelection)
     {
         aAttr = OUString::number(nDocX) + " " + OUString::number(nDocY) + " ";
@@ -910,7 +910,7 @@ void SVGFilter::implGenerateMetaData()
 
         // Add a (global) Page Numbering Type attribute for the document
         // NOTE: at present pSdrModel->GetPageNumType() returns always css::style::NumberingType::ARABIC
-        // so the following code fragment is pretty unuseful
+        // so the following code fragment is pretty useless
         sal_Int32 nPageNumberingType = css::style::NumberingType::ARABIC;
         SvxDrawPage* pSvxDrawPage = SvxDrawPage::getImplementation( mSelectedPages[0] );
         if( pSvxDrawPage )
@@ -1508,7 +1508,7 @@ void SVGFilter::implExportDrawPages( const std::vector< Reference< XDrawPage > >
             {
                 // Insert a further inner the <g> open tag for handling elements
                 // inserted before or after a slide: that is used for some
-                // when swithing from the last to the first slide.
+                // when switching from the last to the first slide.
                 const OUString & sPageId = implGetValidIDFromInterface( rxPages[i] );
                 OUString sContainerId = "container-";
                 sContainerId += sPageId;
diff --git a/filter/source/xslt/import/wordml/wordml2ooo.xsl b/filter/source/xslt/import/wordml/wordml2ooo.xsl
index 55f97148e20d..d7e9ef41cf85 100644
--- a/filter/source/xslt/import/wordml/wordml2ooo.xsl
+++ b/filter/source/xslt/import/wordml/wordml2ooo.xsl
@@ -228,7 +228,7 @@
     <xsl:template match="w:body">
         <xsl:element name="office:body">
             <xsl:element name="office:text">
-                <!-- to add the sequece variable declaration at the beginning of the office:body  G.Y.-->
+                <!-- to add the sequence variable declaration at the beginning of the office:body  G.Y.-->
                 <text:sequence-decls>
                     <xsl:call-template name="default_seqence_declaration"/>
                     <xsl:apply-templates select="/w:wordDocument/w:body//w:instrText[substring(normalize-space(text()),1,3) = 'SEQ' ] | /w:wordDocument/w:body//w:fldSimple[substring(normalize-space(@w:instr),1,3) = 'SEQ' ]  " mode="sequence_declare"/>
diff --git a/filter/source/xslt/odf2xhtml/export/xhtml/body.xsl b/filter/source/xslt/odf2xhtml/export/xhtml/body.xsl
index 7e9eb59734db..e7bcab15f577 100644
--- a/filter/source/xslt/odf2xhtml/export/xhtml/body.xsl
+++ b/filter/source/xslt/odf2xhtml/export/xhtml/body.xsl
@@ -481,7 +481,7 @@
 		<xsl:param name="parentMarginLeft" />
 		<xsl:param name="pageMarginLeft" />
 
-<!-- 2DO: EXCHANGE FOLLOING SIBLING BY VARIABLE -->
+<!-- 2DO: EXCHANGE FOLLOWING SIBLING BY VARIABLE -->
 		<xsl:variable name="followingSiblingNode" select="following-sibling::node()[1]"/>
 
 
diff --git a/filter/source/xslt/odf2xhtml/export/xhtml/table.xsl b/filter/source/xslt/odf2xhtml/export/xhtml/table.xsl
index 417e4f75fa7d..533017c17be1 100644
--- a/filter/source/xslt/odf2xhtml/export/xhtml/table.xsl
+++ b/filter/source/xslt/odf2xhtml/export/xhtml/table.xsl
@@ -117,7 +117,7 @@
 
 				The cell-style depends on two attributes:
 
-				1) table:style-name - the style properties of cell. When they exist, a default alignement (cp. below) will be added for the
+				1) table:style-name - the style properties of cell. When they exist, a default alignment (cp. below) will be added for the
 									  case of no alignment in the style exist.
 
 				2) office:value-type - the value type of the table-cell giving the default alignments.
diff --git a/forms/source/component/ListBox.hxx b/forms/source/component/ListBox.hxx
index f6f591b102e6..402f44d29e95 100644
--- a/forms/source/component/ListBox.hxx
+++ b/forms/source/component/ListBox.hxx
@@ -76,7 +76,7 @@
     ListBox as a sequence of *indices* in the value list, and do the
     lookup on demand:
 
-     - ListBox's content propery (or value property, sorry the
+     - ListBox's content property (or value property, sorry the
        terminology is not always consistent) is SelectedItems which is
        a sequence of *indices* in the value list.
 
diff --git a/forms/source/inc/property.hxx b/forms/source/inc/property.hxx
index 202d449a2fb5..b718e1851800 100644
--- a/forms/source/inc/property.hxx
+++ b/forms/source/inc/property.hxx
@@ -39,7 +39,7 @@ using namespace comphelper;
 namespace frm
 {
 
-//= assigment property handle <-> property name
+//= assignment property handle <-> property name
 //= used by the PropertySetAggregationHelper
 
 
diff --git a/fpicker/source/win32/filepicker/FileOpenDlg.hxx b/fpicker/source/win32/filepicker/FileOpenDlg.hxx
index 36e38e6f1df0..28b01da16ce2 100644
--- a/fpicker/source/win32/filepicker/FileOpenDlg.hxx
+++ b/fpicker/source/win32/filepicker/FileOpenDlg.hxx
@@ -229,7 +229,7 @@ protected:
     sal_uInt32 SAL_CALL onWMNotify(HWND hwndChild, LPOFNOTIFYW lpOfNotify);
 
     // we use non-virtual functions to do necessary work before
-    // calling the virtual funtions (see Gamma: Template method)
+    // calling the virtual functions (see Gamma: Template method)
     void SAL_CALL handleInitDialog(HWND hwndDlg, HWND hwndChild);
 
 protected:
diff --git a/fpicker/source/win32/filepicker/comptr.hxx b/fpicker/source/win32/filepicker/comptr.hxx
index b7f123833a34..2469d8b5e289 100644
--- a/fpicker/source/win32/filepicker/comptr.hxx
+++ b/fpicker/source/win32/filepicker/comptr.hxx
@@ -60,7 +60,7 @@ class ComPtr
         }
 
 
-        /** initialize object by quering external object for the right interface.
+        /** initialize object by querying external object for the right interface.
          */
         explicit ComPtr(IUnknown* pIUnknown)
         {
diff --git a/fpicker/source/win32/filepicker/helppopupwindow.hxx b/fpicker/source/win32/filepicker/helppopupwindow.hxx
index 44f54e268cdf..d63230238f75 100644
--- a/fpicker/source/win32/filepicker/helppopupwindow.hxx
+++ b/fpicker/source/win32/filepicker/helppopupwindow.hxx
@@ -38,7 +38,7 @@
 
 
 /*
-    A simple popup window similary to the one the
+    A simple popup window similarly to the one the
     windows help (using WinHelp) creates when called
     with the option HELP_CONTEXTPOPUP.