use Image(OUString) instead of Image(Bitmap(OUString))

which benefits LOOL since we can delay creating the image until
we know the dpi setting of the display we are going to write to.

Achieved by

perl -pi -w -e "s/\bImage\s*\(\s*BitmapEx\s*\((\w+)\s*\)\s*\)/Image\(\1\)/g" $( git grep -lw "BitmapEx" )

followed by

git grep -nP '\bImage\s*\(\s*BitmapEx\s*\('

followed by commenting out the BitmapEx(OUString) constructor and seeing
what needed adjusting.

Change-Id: I3224e11937d720fa484b0d659d25673a9e809267
Reviewed-on: https://gerrit.libreoffice.org/64760
Tested-by: Jenkins
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>

3 files changed, 117 insertions, 117 deletions

diff --git a/chart2/source/controller/dialogs/ChartTypeDialogController.cxx b/chart2/source/controller/dialogs/ChartTypeDialogController.cxx
index 459dc29e27ad..56a7a2173c88 100644
--- a/chart2/source/controller/dialogs/ChartTypeDialogController.cxx
+++ b/chart2/source/controller/dialogs/ChartTypeDialogController.cxx
@@ -438,36 +438,36 @@ void ColumnChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, co
         switch(rParameter.nGeometry3D)
         {
             case DataPointGeometry3D::CYLINDER:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_SAEULE_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_SAEULE_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_SAEULE_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_SAEULE_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_SAEULE_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_SAEULE_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_SAEULE_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_SAEULE_3D_4));
             break;
             case DataPointGeometry3D::CONE:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_KEGEL_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_KEGEL_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_KEGEL_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_KEGEL_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_KEGEL_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_KEGEL_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_KEGEL_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_KEGEL_3D_4));
             break;
             case DataPointGeometry3D::PYRAMID:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_PYRAMID_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_PYRAMID_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_PYRAMID_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_PYRAMID_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_PYRAMID_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_PYRAMID_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_PYRAMID_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_PYRAMID_3D_4));
             break;
             default: //DataPointGeometry3D::CUBOID:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_COLUMNS_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_COLUMNS_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_COLUMNS_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_COLUMNS_3D)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_COLUMNS_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_COLUMNS_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_COLUMNS_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_COLUMNS_3D));
             break;
         }
     }
     else
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_COLUMNS_2D_1)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_COLUMNS_2D_2)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_COLUMNS_2D_3)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_COLUMNS_2D_1));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_COLUMNS_2D_2));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_COLUMNS_2D_3));
     }
 
     rSubTypeList.SetItemText( 1, SchResId( STR_NORMAL ) );
@@ -515,36 +515,36 @@ void BarChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const
         switch(rParameter.nGeometry3D)
         {
             case DataPointGeometry3D::CYLINDER:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_ROEHRE_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_ROEHRE_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_ROEHRE_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_ROEHRE_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_ROEHRE_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_ROEHRE_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_ROEHRE_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_ROEHRE_3D_4));
             break;
             case DataPointGeometry3D::CONE:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_KEGELQ_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_KEGELQ_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_KEGELQ_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_KEGELQ_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_KEGELQ_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_KEGELQ_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_KEGELQ_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_KEGELQ_3D_4));
             break;
             case DataPointGeometry3D::PYRAMID:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_PYRAMIDQ_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_PYRAMIDQ_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_PYRAMIDQ_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_PYRAMIDQ_3D_4)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_PYRAMIDQ_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_PYRAMIDQ_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_PYRAMIDQ_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_PYRAMIDQ_3D_4));
             break;
             default: //DataPointGeometry3D::CUBOID:
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_BARS_3D_1)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_BARS_3D_2)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_BARS_3D_3)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_BARS_3D)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_BARS_3D_1));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_BARS_3D_2));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_BARS_3D_3));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_BARS_3D));
             break;
         }
     }
     else
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_BARS_2D_1)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_BARS_2D_2)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_BARS_2D_3)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_BARS_2D_1));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_BARS_2D_2));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_BARS_2D_3));
     }
     rSubTypeList.SetItemText( 1, SchResId( STR_NORMAL ) );
     rSubTypeList.SetItemText( 2, SchResId( STR_STACKED ) );
@@ -589,17 +589,17 @@ void PieChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const
 
     if( rParameter.b3DLook )
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_CIRCLES_3D)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_CIRCLES_3D_EXPLODED)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_DONUT_3D)));
-        rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_DONUT_3D_EXPLODED)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_CIRCLES_3D));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_CIRCLES_3D_EXPLODED));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_DONUT_3D));
+        rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_DONUT_3D_EXPLODED));
     }
     else
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_CIRCLES_2D)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_CIRCLES_2D_EXPLODED)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_DONUT_2D)));
-        rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_DONUT_2D_EXPLODED)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_CIRCLES_2D));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_CIRCLES_2D_EXPLODED));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_DONUT_2D));
+        rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_DONUT_2D_EXPLODED));
     }
     rSubTypeList.SetItemText( 1, SchResId( STR_NORMAL         ) );
     rSubTypeList.SetItemText( 2, SchResId( STR_PIE_EXPLODED   ) );
@@ -663,17 +663,17 @@ void LineChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, cons
         case CurveStyle_B_SPLINES:
             if( rParameter.eStackMode == GlobalStackMode_NONE || rParameter.eStackMode == GlobalStackMode_STACK_Z )
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XCATEGORY)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XCATEGORY_SMOOTH)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XCATEGORY_SMOOTH)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XCATEGORY_SMOOTH)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XCATEGORY));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XCATEGORY_SMOOTH));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XCATEGORY_SMOOTH));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XCATEGORY_SMOOTH));
             }
             else
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_STACKED)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_STACKED_SMOOTH)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_STACKED_SMOOTH)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_STACKED_SMOOTH)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_STACKED));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_STACKED_SMOOTH));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_STACKED_SMOOTH));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_STACKED_SMOOTH));
             }
             break;
         case CurveStyle_STEP_START:
@@ -682,34 +682,34 @@ void LineChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, cons
         case CurveStyle_STEP_CENTER_Y:
             if( rParameter.eStackMode == GlobalStackMode_NONE || rParameter.eStackMode == GlobalStackMode_STACK_Z )
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XCATEGORY)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XCATEGORY_STEPPED)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XCATEGORY_STEPPED)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XCATEGORY_STEPPED)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XCATEGORY));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XCATEGORY_STEPPED));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XCATEGORY_STEPPED));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XCATEGORY_STEPPED));
             }
             else
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_STACKED)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_STACKED_STEPPED)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_STACKED_STEPPED)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_STACKED_STEPPED)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_STACKED));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_STACKED_STEPPED));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_STACKED_STEPPED));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_STACKED_STEPPED));
             }
             break;
         default: // includes CurveStyle_LINES
             //direct lines
             if( rParameter.eStackMode == GlobalStackMode_NONE || rParameter.eStackMode == GlobalStackMode_STACK_Z )
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XCATEGORY)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XCATEGORY)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XCATEGORY)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XCATEGORY)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XCATEGORY));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XCATEGORY));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XCATEGORY));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XCATEGORY));
             }
             else
             {
-                rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_STACKED)));
-                rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_STACKED)));
-                rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_STACKED)));
-                rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_STACKED)));
+                rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_STACKED));
+                rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_STACKED));
+                rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_STACKED));
+                rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_STACKED));
             }
     }
 
@@ -806,10 +806,10 @@ void XYChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const
         case CurveStyle_CUBIC_SPLINES:
         case CurveStyle_B_SPLINES:
         {
-            rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XVALUES)));
-            rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XVALUES_SMOOTH)));
-            rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XVALUES_SMOOTH)));
-            rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XVALUES_SMOOTH)));
+            rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XVALUES));
+            rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XVALUES_SMOOTH));
+            rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XVALUES_SMOOTH));
+            rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XVALUES_SMOOTH));
             break;
         }
         case CurveStyle_STEP_START:
@@ -817,17 +817,17 @@ void XYChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const
         case CurveStyle_STEP_CENTER_X:
         case CurveStyle_STEP_CENTER_Y:
         {
-            rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XVALUES)));
-            rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XVALUES_STEPPED)));
-            rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XVALUES_STEPPED)));
-            rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XVALUES_STEPPED)));
+            rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XVALUES));
+            rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XVALUES_STEPPED));
+            rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XVALUES_STEPPED));
+            rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XVALUES_STEPPED));
             break;
         }
         default: // includes CurveStyle_LINES
-            rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_POINTS_XVALUES)));
-            rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_LINE_P_XVALUES)));
-            rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_LINE_O_XVALUES)));
-            rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_LINE3D_XVALUES)));
+            rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_POINTS_XVALUES));
+            rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_LINE_P_XVALUES));
+            rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_LINE_O_XVALUES));
+            rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_LINE3D_XVALUES));
     }
 
     rSubTypeList.SetItemText( 1, SchResId( STR_POINTS_ONLY ) );
@@ -913,15 +913,15 @@ void AreaChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, cons
 
     if( rParameter.b3DLook )
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_AREAS_3D)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_AREAS_3D_1)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_AREAS_3D_2)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_AREAS_3D));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_AREAS_3D_1));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_AREAS_3D_2));
     }
     else
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_AREAS_2D_1)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_AREAS_2D)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_AREAS_2D_3)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_AREAS_2D_1));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_AREAS_2D));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_AREAS_2D_3));
     }
 
     rSubTypeList.SetItemText( 1, SchResId( rParameter.b3DLook ? STR_DEEP : STR_NORMAL ) );
@@ -1009,17 +1009,17 @@ void NetChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const
 
     if( rParameter.eStackMode == GlobalStackMode_NONE )
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_NET_SYMB)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_NET_LINESYMB)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_NET)));
-        rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_NET_FILL)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_NET_SYMB));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_NET_LINESYMB));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_NET));
+        rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_NET_FILL));
     }
     else
     {
-        rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_NET_SYMB_STACK)));
-        rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_NET_LINESYMB_STACK)));
-        rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_NET_STACK)));
-        rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_NET_FILL_STACK)));
+        rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_NET_SYMB_STACK));
+        rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_NET_LINESYMB_STACK));
+        rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_NET_STACK));
+        rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_NET_FILL_STACK));
     }
 
     rSubTypeList.SetItemText( 1, SchResId( STR_POINTS_ONLY ) );
@@ -1085,10 +1085,10 @@ const tTemplateServiceChartTypeParameterMap& StockChartDialogController::getTemp
 void StockChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const ChartTypeParameter& /*rParameter*/ )
 {
     rSubTypeList.Clear();
-    rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_STOCK_1)));
-    rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_STOCK_2)));
-    rSubTypeList.InsertItem(3, Image(BitmapEx(BMP_STOCK_3)));
-    rSubTypeList.InsertItem(4, Image(BitmapEx(BMP_STOCK_4)));
+    rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_STOCK_1));
+    rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_STOCK_2));
+    rSubTypeList.InsertItem(3, Image(StockImage::Yes, BMP_STOCK_3));
+    rSubTypeList.InsertItem(4, Image(StockImage::Yes, BMP_STOCK_4));
 
     rSubTypeList.SetItemText( 1, SchResId(STR_STOCK_1) );
     rSubTypeList.SetItemText( 2, SchResId(STR_STOCK_2) );
@@ -1128,8 +1128,8 @@ const tTemplateServiceChartTypeParameterMap& CombiColumnLineChartDialogControlle
 void CombiColumnLineChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const ChartTypeParameter& /*rParameter*/ )
 {
     rSubTypeList.Clear();
-    rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_COLUMN_LINE)));
-    rSubTypeList.InsertItem(2, Image(BitmapEx(BMP_COLUMN_LINE_STACKED)));
+    rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_COLUMN_LINE));
+    rSubTypeList.InsertItem(2, Image(StockImage::Yes, BMP_COLUMN_LINE_STACKED));
 
     rSubTypeList.SetItemText(1, SchResId(STR_LINE_COLUMN));
     rSubTypeList.SetItemText(2, SchResId(STR_LINE_STACKEDCOLUMN));
@@ -1256,7 +1256,7 @@ const tTemplateServiceChartTypeParameterMap& BubbleChartDialogController::getTem
 void BubbleChartDialogController::fillSubTypeList( SvtValueSet& rSubTypeList, const ChartTypeParameter& /*rParameter*/ )
 {
     rSubTypeList.Clear();
-    rSubTypeList.InsertItem(1, Image(BitmapEx(BMP_BUBBLE_1)));
+    rSubTypeList.InsertItem(1, Image(StockImage::Yes, BMP_BUBBLE_1));
 
     rSubTypeList.SetItemText( 1, SchResId(STR_BUBBLE_1) );
 }
diff --git a/chart2/source/controller/dialogs/DataBrowser.cxx b/chart2/source/controller/dialogs/DataBrowser.cxx
index 006ffbe97888..740735d45829 100644
--- a/chart2/source/controller/dialogs/DataBrowser.cxx
+++ b/chart2/source/controller/dialogs/DataBrowser.cxx
@@ -358,40 +358,40 @@ Image SeriesHeader::GetChartTypeImage(
 
     if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_AREA )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_AREA));
+        aResult = Image(StockImage::Yes, BMP_TYPE_AREA);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_COLUMN )
     {
         if( bSwapXAndYAxis )
-            aResult = Image(BitmapEx(BMP_TYPE_BAR));
+            aResult = Image(StockImage::Yes, BMP_TYPE_BAR);
         else
-            aResult = Image(BitmapEx(BMP_TYPE_COLUMN));
+            aResult = Image(StockImage::Yes, BMP_TYPE_COLUMN);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_LINE )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_LINE));
+        aResult = Image(StockImage::Yes, BMP_TYPE_LINE);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_SCATTER )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_XY));
+        aResult = Image(StockImage::Yes, BMP_TYPE_XY);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_PIE )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_PIE));
+        aResult = Image(StockImage::Yes, BMP_TYPE_PIE);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_NET
           || aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_FILLED_NET )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_NET));
+        aResult = Image(StockImage::Yes, BMP_TYPE_NET);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_CANDLESTICK )
     {
         // @todo: correct image for candle-stick type
-        aResult = Image(BitmapEx(BMP_TYPE_STOCK));
+        aResult = Image(StockImage::Yes, BMP_TYPE_STOCK);
     }
     else if( aChartTypeName == CHART2_SERVICE_NAME_CHARTTYPE_BUBBLE )
     {
-        aResult = Image(BitmapEx(BMP_TYPE_BUBBLE));
+        aResult = Image(StockImage::Yes, BMP_TYPE_BUBBLE);
     }
 
     return aResult;
diff --git a/chart2/source/controller/dialogs/tp_3D_SceneIllumination.cxx b/chart2/source/controller/dialogs/tp_3D_SceneIllumination.cxx
index fb27b035eb22..a6e70f363af6 100644
--- a/chart2/source/controller/dialogs/tp_3D_SceneIllumination.cxx
+++ b/chart2/source/controller/dialogs/tp_3D_SceneIllumination.cxx
@@ -43,7 +43,7 @@ LightButton::LightButton( vcl::Window* pParent)
             : ImageButton( pParent)
             , m_bLightOn(false)
 {
-    SetModeImage(Image(BitmapEx(RID_SVXBMP_LAMP_OFF)));
+    SetModeImage(Image(StockImage::Yes, RID_SVXBMP_LAMP_OFF));
 }
 
 VCL_BUILDER_FACTORY(LightButton)
@@ -55,11 +55,11 @@ void LightButton::switchLightOn(bool bOn)
     m_bLightOn = bOn;
     if(m_bLightOn)
     {
-        SetModeImage(Image(BitmapEx(RID_SVXBMP_LAMP_ON)));
+        SetModeImage(Image(StockImage::Yes, RID_SVXBMP_LAMP_ON));
     }
     else
     {
-        SetModeImage(Image(BitmapEx(RID_SVXBMP_LAMP_OFF)));
+        SetModeImage(Image(StockImage::Yes, RID_SVXBMP_LAMP_OFF));
     }
 }
 
@@ -98,9 +98,9 @@ void LightSourceInfo::initButtonFromSource()
 {
     if(!pButton)
         return;
-    pButton->SetModeImage(Image(BitmapEx(
+    pButton->SetModeImage(Image(StockImage::Yes,
         aLightSource.bIsEnabled ? OUString(RID_SVXBMP_LAMP_ON) : OUString(RID_SVXBMP_LAMP_OFF)
-    ) ) );
+    ) );
 }
 
 namespace