chart2: Separate definition from declaration for ChartResourceGroups

Change-Id: I861eaf0e519c428debc28436ea41724fdf493359
Reviewed-on: https://gerrit.libreoffice.org/81634
Reviewed-by: Muhammet Kara <muhammet.kara@collabora.com>
Tested-by: Muhammet Kara <muhammet.kara@collabora.com>
Reviewed-on: https://gerrit.libreoffice.org/82463
Tested-by: Jenkins

2 files changed, 456 insertions, 421 deletions

diff --git a/chart2/source/controller/dialogs/ChartResourceGroups.cxx b/chart2/source/controller/dialogs/ChartResourceGroups.cxx
new file mode 100644
index 000000000000..0e449881dc58
--- /dev/null
+++ b/chart2/source/controller/dialogs/ChartResourceGroups.cxx
@@ -0,0 +1,450 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <ChartResourceGroups.hxx>
+
+namespace chart
+{
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::chart2;
+
+Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_3DLook(pBuilder->weld_check_button("3dlook"))
+    , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme"))
+{
+    m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl));
+    m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl));
+}
+
+void Dim3DLookResourceGroup::showControls(bool bShow)
+{
+    m_xCB_3DLook->set_visible(bShow);
+    m_xLB_Scheme->set_visible(bShow);
+}
+
+void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_3DLook->set_active(rParameter.b3DLook);
+    m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
+
+    if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple)
+        m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
+    else if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic)
+        m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
+    else
+        m_xLB_Scheme->set_active(-1);
+}
+
+void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.b3DLook = m_xCB_3DLook->get_active();
+    const int nPos = m_xLB_Scheme->get_active();
+    if (nPos == POS_3DSCHEME_SIMPLE)
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple;
+    else if (nPos == POS_3DSCHEME_REALISTIC)
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic;
+    else
+        rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown;
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_XValueSorting(pBuilder->weld_check_button("sort"))
+{
+    m_xCB_XValueSorting->connect_toggled(
+        LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
+}
+
+void SortByXValuesResourceGroup::showControls(bool bShow)
+{
+    m_xCB_XValueSorting->set_visible(bShow);
+}
+
+void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
+}
+
+void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
+}
+
+IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_xCB_Stacked(pBuilder->weld_check_button("stack"))
+    , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop"))
+    , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent"))
+    , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep"))
+{
+    m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl));
+    m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+    m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
+}
+
+void StackingResourceGroup::showControls(bool bShow, bool bShowDeepStacking)
+{
+    m_xCB_Stacked->set_visible(bShow);
+    m_xRB_Stack_Y->set_visible(bShow);
+    m_xRB_Stack_Y_Percent->set_visible(bShow);
+    m_xRB_Stack_Z->set_visible(bShow && bShowDeepStacking);
+}
+
+void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    m_xCB_Stacked->set_active(
+        rParameter.eStackMode != GlobalStackMode_NONE
+        && rParameter.eStackMode
+               != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used
+    switch (rParameter.eStackMode)
+    {
+        case GlobalStackMode_STACK_Y:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Y_PERCENT:
+            m_xRB_Stack_Y_Percent->set_active(true);
+            break;
+        case GlobalStackMode_STACK_Z:
+            //todo uncomment this condition if z stacking radio button is really used
+            /*
+            if( rParameter.b3DLook )
+                m_xRB_Stack_Z->set_active(true);
+            else
+            */
+            m_xRB_Stack_Y->set_active(true);
+            break;
+        default:
+            m_xRB_Stack_Y->set_active(true);
+            break;
+    }
+    //dis/enabling
+    m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active()
+                                         && !rParameter.bXAxisWithValues);
+    m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook);
+}
+
+void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    if (!m_xCB_Stacked->get_active())
+        rParameter.eStackMode = GlobalStackMode_NONE;
+    else if (m_xRB_Stack_Y->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y;
+    else if (m_xRB_Stack_Y_Percent->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
+    else if (m_xRB_Stack_Z->get_active())
+        rParameter.eStackMode = GlobalStackMode_STACK_Z;
+}
+
+IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void)
+{
+    //for each radio click there are coming two change events
+    //first uncheck of previous button -> ignore that call
+    //the second call gives the check of the new button
+    if (m_pChangeListener && rRadio.get_active())
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog")
+    , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox"))
+    , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton"))
+    , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel"))
+    , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+
+    m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl));
+}
+
+void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_CUBIC_SPLINES:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+        case CurveStyle_B_SPLINES:
+            m_xLB_Spline_Type->set_active(B_SPLINE_POS);
+            break;
+        default:
+            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
+            break;
+    }
+    m_xMF_SplineOrder->set_value(rParameter.nSplineOrder);
+    m_xMF_SplineResolution->set_value(rParameter.nCurveResolution);
+
+    //dis/enabling
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines)
+{
+    if (!bSmoothLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES;
+    else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS)
+        rParameter.eCurveStyle = CurveStyle_B_SPLINES;
+
+    rParameter.nCurveResolution = m_xMF_SplineResolution->get_value();
+    rParameter.nSplineOrder = m_xMF_SplineOrder->get_value();
+}
+
+IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void)
+{
+    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
+}
+
+SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent)
+    : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog")
+    , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb"))
+    , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb"))
+    , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb"))
+    , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb"))
+{
+    m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+}
+
+void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_STEP_END:
+            m_xRB_End->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_X:
+            m_xRB_CenterX->set_active(true);
+            break;
+        case CurveStyle_STEP_CENTER_Y:
+            m_xRB_CenterY->set_active(true);
+            break;
+        default: // includes CurveStyle_STEP_START
+            m_xRB_Start->set_active(true);
+            break;
+    }
+}
+void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines)
+{
+    if (!bSteppedLines)
+        rParameter.eCurveStyle = CurveStyle_LINES;
+    else if (m_xRB_CenterY->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y;
+    else if (m_xRB_Start->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_START;
+    else if (m_xRB_End->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_END;
+    else if (m_xRB_CenterX->get_active())
+        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X;
+}
+
+SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent)
+    : ChangingResource()
+    , m_pParent(pParent)
+    , m_xFT_LineType(pBuilder->weld_label("linetypeft"))
+    , m_xLB_LineType(pBuilder->weld_combo_box("linetype"))
+    , m_xPB_DetailsDialog(pBuilder->weld_button("properties"))
+{
+    m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
+}
+
+SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog()
+{
+    if (!m_xSplinePropertiesDialog)
+    {
+        m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent));
+    }
+    return *m_xSplinePropertiesDialog;
+}
+
+SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog()
+{
+    if (!m_xSteppedPropertiesDialog)
+    {
+        m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent));
+    }
+    return *m_xSteppedPropertiesDialog;
+}
+
+void SplineResourceGroup::showControls(bool bShow)
+{
+    m_xFT_LineType->set_visible(bShow);
+    m_xLB_LineType->set_visible(bShow);
+    m_xPB_DetailsDialog->set_visible(bShow);
+}
+
+void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    switch (rParameter.eCurveStyle)
+    {
+        case CurveStyle_LINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
+            m_xPB_DetailsDialog->set_sensitive(false);
+            break;
+        case CurveStyle_CUBIC_SPLINES:
+        case CurveStyle_B_SPLINES:
+            m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SplineDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
+            getSplinePropertiesDialog().fillControls(rParameter);
+            break;
+        case CurveStyle_STEP_START:
+        case CurveStyle_STEP_END:
+        case CurveStyle_STEP_CENTER_X:
+        case CurveStyle_STEP_CENTER_Y:
+            m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+            m_xPB_DetailsDialog->set_sensitive(true);
+            m_xPB_DetailsDialog->connect_clicked(
+                LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl));
+            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
+            getSteppedPropertiesDialog().fillControls(rParameter);
+            break;
+        default:
+            m_xLB_LineType->set_active(-1);
+            m_xPB_DetailsDialog->set_sensitive(false);
+    }
+}
+void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    switch (m_xLB_LineType->get_active())
+    {
+        case POS_LINETYPE_SMOOTH:
+            getSplinePropertiesDialog().fillParameter(rParameter, true);
+            break;
+        case POS_LINETYPE_STEPPED:
+            getSteppedPropertiesDialog().fillParameter(rParameter, true);
+            break;
+        default: // includes POS_LINETYPE_STRAIGHT
+            rParameter.eCurveStyle = CurveStyle_LINES;
+            break;
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSplinePropertiesDialog().fillParameter(aOldParameter,
+                                              m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
+    if (getSplinePropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged();
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSplinePropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
+{
+    ChartTypeParameter aOldParameter;
+    getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active()
+                                                                  == POS_LINETYPE_STEPPED);
+
+    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
+    m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
+    if (getSteppedPropertiesDialog().run() == RET_OK)
+    {
+        if (m_pChangeListener)
+            m_pChangeListener->stateChanged();
+    }
+    else
+    {
+        //restore old state:
+        m_xLB_LineType->set_active(iOldLineTypePos);
+        getSteppedPropertiesDialog().fillControls(aOldParameter);
+    }
+}
+
+GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
+    : ChangingResource()
+    , m_aGeometryResources(pBuilder)
+{
+    m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl));
+}
+
+void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); }
+
+void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
+{
+    sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
+    m_aGeometryResources.select(nGeometry3D);
+    m_aGeometryResources.set_sensitive(rParameter.b3DLook);
+}
+
+void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
+{
+    rParameter.nGeometry3D = 1;
+    int nSelected = m_aGeometryResources.get_selected_index();
+    if (nSelected != -1)
+        rParameter.nGeometry3D = nSelected;
+}
+
+IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
+{
+    if (m_pChangeListener)
+        m_pChangeListener->stateChanged();
+}
+
+} //namespace chart
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/chart2/source/inc/ChartResourceGroups.hxx b/chart2/source/inc/ChartResourceGroups.hxx
index 343462b9893d..3e04fe1f1d81 100644
--- a/chart2/source/inc/ChartResourceGroups.hxx
+++ b/chart2/source/inc/ChartResourceGroups.hxx
@@ -24,6 +24,12 @@
 #include "ResId.hxx"
 
 #include "res_BarGeometry.hxx"
+#include "ChangingResource.hxx"
+#include "ChartTypeDialogController.hxx"
+
+#include <vcl/tabpage.hxx>
+
+#include <com/sun/star/chart2/XChartDocument.hpp>
 
 namespace chart
 {
@@ -55,58 +61,6 @@ private:
     std::unique_ptr<weld::ComboBox> m_xLB_Scheme;
 };
 
-Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_3DLook(pBuilder->weld_check_button("3dlook"))
-    , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme"))
-{
-    m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl));
-    m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl));
-}
-
-void Dim3DLookResourceGroup::showControls(bool bShow)
-{
-    m_xCB_3DLook->set_visible(bShow);
-    m_xLB_Scheme->set_visible(bShow);
-}
-
-void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    m_xCB_3DLook->set_active(rParameter.b3DLook);
-    m_xLB_Scheme->set_sensitive(rParameter.b3DLook);
-
-    if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple)
-        m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE);
-    else if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic)
-        m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC);
-    else
-        m_xLB_Scheme->set_active(-1);
-}
-
-void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    rParameter.b3DLook = m_xCB_3DLook->get_active();
-    const int nPos = m_xLB_Scheme->get_active();
-    if (nPos == POS_3DSCHEME_SIMPLE)
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple;
-    else if (nPos == POS_3DSCHEME_REALISTIC)
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic;
-    else
-        rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown;
-}
-
-IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
-IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
 class SortByXValuesResourceGroup : public ChangingResource
 {
 public:
@@ -124,35 +78,6 @@ private:
     std::unique_ptr<weld::CheckButton> m_xCB_XValueSorting;
 };
 
-SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_XValueSorting(pBuilder->weld_check_button("sort"))
-{
-    m_xCB_XValueSorting->connect_toggled(
-        LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl));
-}
-
-void SortByXValuesResourceGroup::showControls(bool bShow)
-{
-    m_xCB_XValueSorting->set_visible(bShow);
-}
-
-void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    m_xCB_XValueSorting->set_active(rParameter.bSortByXValues);
-}
-
-void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    rParameter.bSortByXValues = m_xCB_XValueSorting->get_active();
-}
-
-IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
 class StackingResourceGroup : public ChangingResource
 {
 public:
@@ -174,89 +99,6 @@ private:
     std::unique_ptr<weld::RadioButton> m_xRB_Stack_Z;
 };
 
-StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_xCB_Stacked(pBuilder->weld_check_button("stack"))
-    , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop"))
-    , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent"))
-    , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep"))
-{
-    m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl));
-    m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
-    m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
-    m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl));
-}
-
-void StackingResourceGroup::showControls(bool bShow, bool bShowDeepStacking)
-{
-    m_xCB_Stacked->set_visible(bShow);
-    m_xRB_Stack_Y->set_visible(bShow);
-    m_xRB_Stack_Y_Percent->set_visible(bShow);
-    m_xRB_Stack_Z->set_visible(bShow && bShowDeepStacking);
-}
-
-void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    m_xCB_Stacked->set_active(
-        rParameter.eStackMode != GlobalStackMode_NONE
-        && rParameter.eStackMode
-               != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used
-    switch (rParameter.eStackMode)
-    {
-        case GlobalStackMode_STACK_Y:
-            m_xRB_Stack_Y->set_active(true);
-            break;
-        case GlobalStackMode_STACK_Y_PERCENT:
-            m_xRB_Stack_Y_Percent->set_active(true);
-            break;
-        case GlobalStackMode_STACK_Z:
-            //todo uncomment this condition if z stacking radio button is really used
-            /*
-            if( rParameter.b3DLook )
-                m_xRB_Stack_Z->set_active(true);
-            else
-            */
-            m_xRB_Stack_Y->set_active(true);
-            break;
-        default:
-            m_xRB_Stack_Y->set_active(true);
-            break;
-    }
-    //dis/enabling
-    m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues);
-    m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues);
-    m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active()
-                                         && !rParameter.bXAxisWithValues);
-    m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook);
-}
-
-void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    if (!m_xCB_Stacked->get_active())
-        rParameter.eStackMode = GlobalStackMode_NONE;
-    else if (m_xRB_Stack_Y->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Y;
-    else if (m_xRB_Stack_Y_Percent->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT;
-    else if (m_xRB_Stack_Z->get_active())
-        rParameter.eStackMode = GlobalStackMode_STACK_Z;
-}
-
-IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void)
-{
-    //for each radio click there are coming two change events
-    //first uncheck of previous button -> ignore that call
-    //the second call gives the check of the new button
-    if (m_pChangeListener && rRadio.get_active())
-        m_pChangeListener->stateChanged();
-}
-
-IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
 class SplinePropertiesDialog : public weld::GenericDialogController
 {
 public:
@@ -278,59 +120,6 @@ private:
 const sal_uInt16 CUBIC_SPLINE_POS = 0;
 const sal_uInt16 B_SPLINE_POS = 1;
 
-SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent)
-    : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog")
-    , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox"))
-    , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton"))
-    , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel"))
-    , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton"))
-{
-    m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
-
-    m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl));
-}
-
-void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
-{
-    switch (rParameter.eCurveStyle)
-    {
-        case CurveStyle_CUBIC_SPLINES:
-            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
-            break;
-        case CurveStyle_B_SPLINES:
-            m_xLB_Spline_Type->set_active(B_SPLINE_POS);
-            break;
-        default:
-            m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS);
-            break;
-    }
-    m_xMF_SplineOrder->set_value(rParameter.nSplineOrder);
-    m_xMF_SplineResolution->set_value(rParameter.nCurveResolution);
-
-    //dis/enabling
-    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-}
-
-void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines)
-{
-    if (!bSmoothLines)
-        rParameter.eCurveStyle = CurveStyle_LINES;
-    else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS)
-        rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES;
-    else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS)
-        rParameter.eCurveStyle = CurveStyle_B_SPLINES;
-
-    rParameter.nCurveResolution = m_xMF_SplineResolution->get_value();
-    rParameter.nSplineOrder = m_xMF_SplineOrder->get_value();
-}
-
-IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void)
-{
-    m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-    m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS);
-}
-
 class SteppedPropertiesDialog : public weld::GenericDialogController
 {
 public:
@@ -346,48 +135,6 @@ private:
     std::unique_ptr<weld::RadioButton> m_xRB_CenterY;
 };
 
-SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent)
-    : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog")
-    , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb"))
-    , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb"))
-    , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb"))
-    , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb"))
-{
-    m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
-}
-
-void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter)
-{
-    switch (rParameter.eCurveStyle)
-    {
-        case CurveStyle_STEP_END:
-            m_xRB_End->set_active(true);
-            break;
-        case CurveStyle_STEP_CENTER_X:
-            m_xRB_CenterX->set_active(true);
-            break;
-        case CurveStyle_STEP_CENTER_Y:
-            m_xRB_CenterY->set_active(true);
-            break;
-        default: // includes CurveStyle_STEP_START
-            m_xRB_Start->set_active(true);
-            break;
-    }
-}
-void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines)
-{
-    if (!bSteppedLines)
-        rParameter.eCurveStyle = CurveStyle_LINES;
-    else if (m_xRB_CenterY->get_active())
-        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y;
-    else if (m_xRB_Start->get_active())
-        rParameter.eCurveStyle = CurveStyle_STEP_START;
-    else if (m_xRB_End->get_active())
-        rParameter.eCurveStyle = CurveStyle_STEP_END;
-    else if (m_xRB_CenterX->get_active())
-        rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X;
-}
-
 #define POS_LINETYPE_STRAIGHT 0
 #define POS_LINETYPE_SMOOTH 1
 #define POS_LINETYPE_STEPPED 2
@@ -418,138 +165,6 @@ private:
     std::unique_ptr<SteppedPropertiesDialog> m_xSteppedPropertiesDialog;
 };
 
-SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent)
-    : ChangingResource()
-    , m_pParent(pParent)
-    , m_xFT_LineType(pBuilder->weld_label("linetypeft"))
-    , m_xLB_LineType(pBuilder->weld_combo_box("linetype"))
-    , m_xPB_DetailsDialog(pBuilder->weld_button("properties"))
-{
-    m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl));
-}
-
-SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog()
-{
-    if (!m_xSplinePropertiesDialog)
-    {
-        m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent));
-    }
-    return *m_xSplinePropertiesDialog;
-}
-
-SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog()
-{
-    if (!m_xSteppedPropertiesDialog)
-    {
-        m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent));
-    }
-    return *m_xSteppedPropertiesDialog;
-}
-
-void SplineResourceGroup::showControls(bool bShow)
-{
-    m_xFT_LineType->set_visible(bShow);
-    m_xLB_LineType->set_visible(bShow);
-    m_xPB_DetailsDialog->set_visible(bShow);
-}
-
-void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    switch (rParameter.eCurveStyle)
-    {
-        case CurveStyle_LINES:
-            m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT);
-            m_xPB_DetailsDialog->set_sensitive(false);
-            break;
-        case CurveStyle_CUBIC_SPLINES:
-        case CurveStyle_B_SPLINES:
-            m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
-            m_xPB_DetailsDialog->set_sensitive(true);
-            m_xPB_DetailsDialog->connect_clicked(
-                LINK(this, SplineResourceGroup, SplineDetailsDialogHdl));
-            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES));
-            getSplinePropertiesDialog().fillControls(rParameter);
-            break;
-        case CurveStyle_STEP_START:
-        case CurveStyle_STEP_END:
-        case CurveStyle_STEP_CENTER_X:
-        case CurveStyle_STEP_CENTER_Y:
-            m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
-            m_xPB_DetailsDialog->set_sensitive(true);
-            m_xPB_DetailsDialog->connect_clicked(
-                LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl));
-            m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES));
-            getSteppedPropertiesDialog().fillControls(rParameter);
-            break;
-        default:
-            m_xLB_LineType->set_active(-1);
-            m_xPB_DetailsDialog->set_sensitive(false);
-    }
-}
-void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    switch (m_xLB_LineType->get_active())
-    {
-        case POS_LINETYPE_SMOOTH:
-            getSplinePropertiesDialog().fillParameter(rParameter, true);
-            break;
-        case POS_LINETYPE_STEPPED:
-            getSteppedPropertiesDialog().fillParameter(rParameter, true);
-            break;
-        default: // includes POS_LINETYPE_STRAIGHT
-            rParameter.eCurveStyle = CurveStyle_LINES;
-            break;
-    }
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void)
-{
-    ChartTypeParameter aOldParameter;
-    getSplinePropertiesDialog().fillParameter(aOldParameter,
-                                              m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH);
-
-    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
-    m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH);
-    if (getSplinePropertiesDialog().run() == RET_OK)
-    {
-        if (m_pChangeListener)
-            m_pChangeListener->stateChanged();
-    }
-    else
-    {
-        //restore old state:
-        m_xLB_LineType->set_active(iOldLineTypePos);
-        getSplinePropertiesDialog().fillControls(aOldParameter);
-    }
-}
-
-IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void)
-{
-    ChartTypeParameter aOldParameter;
-    getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active()
-                                                                  == POS_LINETYPE_STEPPED);
-
-    const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active();
-    m_xLB_LineType->set_active(POS_LINETYPE_STEPPED);
-    if (getSteppedPropertiesDialog().run() == RET_OK)
-    {
-        if (m_pChangeListener)
-            m_pChangeListener->stateChanged();
-    }
-    else
-    {
-        //restore old state:
-        m_xLB_LineType->set_active(iOldLineTypePos);
-        getSteppedPropertiesDialog().fillControls(aOldParameter);
-    }
-}
-
 class GeometryResourceGroup : public ChangingResource
 {
 public:
@@ -567,36 +182,6 @@ private:
     BarGeometryResources m_aGeometryResources;
 };
 
-GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder)
-    : ChangingResource()
-    , m_aGeometryResources(pBuilder)
-{
-    m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl));
-}
-
-void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); }
-
-void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter)
-{
-    sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D);
-    m_aGeometryResources.select(nGeometry3D);
-    m_aGeometryResources.set_sensitive(rParameter.b3DLook);
-}
-
-void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter)
-{
-    rParameter.nGeometry3D = 1;
-    int nSelected = m_aGeometryResources.get_selected_index();
-    if (nSelected != -1)
-        rParameter.nGeometry3D = nSelected;
-}
-
-IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void)
-{
-    if (m_pChangeListener)
-        m_pChangeListener->stateChanged();
-}
-
 } //namespace chart
 #endif