dmake: Add all the automake files, premade so developers do not require automake installed

7 files changed, 2109 insertions, 0 deletions

diff --git a/dmake/Makefile.in b/dmake/Makefile.in
new file mode 100755
index 000000000000..5b4587567d16
--- /dev/null
+++ b/dmake/Makefile.in
@@ -0,0 +1,554 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+#*************************************************************************
+#
+#   $RCSfile: Makefile.in,v $
+#
+#   $Revision: 1.4 $
+#
+#   last change: $Author: waratah $ $Date: 2002-10-01 15:08:20 $
+#
+#   The Contents of this file are made available subject to the terms of
+#   either of the following licenses
+#
+#          - GNU Lesser General Public License Version 2.1
+#          - Sun Industry Standards Source License Version 1.1
+#
+#   Sun Microsystems Inc., October, 2000
+#
+#   GNU Lesser General Public License Version 2.1
+#   =============================================
+#   Copyright 2000 by Sun Microsystems, Inc.
+#   901 San Antonio Road, Palo Alto, CA 94303, USA
+#
+#   This library is free software; you can redistribute it and/or
+#   modify it under the terms of the GNU Lesser General Public
+#   License version 2.1, as published by the Free Software Foundation.
+#
+#   This library is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty of
+#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+#   Lesser General Public License for more details.
+#
+#   You should have received a copy of the GNU Lesser General Public
+#   License along with this library; if not, write to the Free Software
+#   Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+#   MA  02111-1307  USA
+#
+#
+#   Sun Industry Standards Source License Version 1.1
+#   =================================================
+#   The contents of this file are subject to the Sun Industry Standards
+#   Source License Version 1.1 (the "License"); You may not use this file
+#   except in compliance with the License. You may obtain a copy of the
+#   License at http://www.openoffice.org/license.html.
+#
+#   Software provided under this License is provided on an "AS IS" basis,
+#   WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+#   WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
+#   MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
+#   See the License for the specific provisions governing your rights and
+#   obligations concerning the Software.
+#
+#   The Initial Developer of the Original Code is: Sun Microsystems, Inc.
+#
+#   Copyright: 2000 by Sun Microsystems, Inc.
+#
+#   All Rights Reserved.
+#
+#   Contributor(s): _______________________________________
+#
+#
+#
+#*************************************************************************
+
+# require automake 1.4
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+AUTOMAKE_OPTIONS = 1.4 foreign
+
+bin_PROGRAMS = dmake
+dmake_SOURCES = \
+	infer.c make.c stat.c expand.c dmstring.c hash.c dag.c dmake.c\
+	path.c imacs.c sysintf.c parse.c getinp.c quit.c state.c\
+	dmdump.c macparse.c rulparse.c percent.c function.c
+
+dmake_LDADD = unix/libunix.a
+
+SUBDIRS = unix startup
+
+EXTRA_DIST = make.c 
+
+# set the include path found by configure
+INCLUDES = -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/unix/@OS_VERSION@ -I$(top_srcdir)/unix -I$(top_srcdir)/unix/@OS_VERSION@/gnu 
+
+CFLAGS = -O
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES = dmakeroot.h
+bin_PROGRAMS = dmake$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+
+am_dmake_OBJECTS = infer.$(OBJEXT) make.$(OBJEXT) stat.$(OBJEXT) \
+	expand.$(OBJEXT) dmstring.$(OBJEXT) hash.$(OBJEXT) \
+	dag.$(OBJEXT) dmake.$(OBJEXT) path.$(OBJEXT) imacs.$(OBJEXT) \
+	sysintf.$(OBJEXT) parse.$(OBJEXT) getinp.$(OBJEXT) \
+	quit.$(OBJEXT) state.$(OBJEXT) dmdump.$(OBJEXT) \
+	macparse.$(OBJEXT) rulparse.$(OBJEXT) percent.$(OBJEXT) \
+	function.$(OBJEXT)
+dmake_OBJECTS = $(am_dmake_OBJECTS)
+dmake_DEPENDENCIES = unix/libunix.a
+dmake_LDFLAGS =
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/dag.Po $(DEPDIR)/dmake.Po \
+@AMDEP_TRUE@	$(DEPDIR)/dmdump.Po $(DEPDIR)/dmstring.Po \
+@AMDEP_TRUE@	$(DEPDIR)/expand.Po $(DEPDIR)/function.Po \
+@AMDEP_TRUE@	$(DEPDIR)/getinp.Po $(DEPDIR)/hash.Po \
+@AMDEP_TRUE@	$(DEPDIR)/imacs.Po $(DEPDIR)/infer.Po \
+@AMDEP_TRUE@	$(DEPDIR)/macparse.Po $(DEPDIR)/make.Po \
+@AMDEP_TRUE@	$(DEPDIR)/parse.Po $(DEPDIR)/path.Po \
+@AMDEP_TRUE@	$(DEPDIR)/percent.Po $(DEPDIR)/quit.Po \
+@AMDEP_TRUE@	$(DEPDIR)/rulparse.Po $(DEPDIR)/stat.Po \
+@AMDEP_TRUE@	$(DEPDIR)/state.Po $(DEPDIR)/sysintf.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(dmake_SOURCES)
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = AUTHORS COPYING ChangeLog INSTALL Makefile.am Makefile.in \
+	NEWS acconfig.h acinclude.m4 aclocal.m4 config.guess config.sub \
+	configure configure.in depcomp dmakeroot.h.in install-sh \
+	missing mkinstalldirs
+DIST_SUBDIRS = $(SUBDIRS)
+SOURCES = $(dmake_SOURCES)
+
+all: all-recursive
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign  Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$@ $(SHELL) ./config.status
+
+$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+	cd $(srcdir) && $(AUTOCONF)
+
+$(ACLOCAL_M4):  configure.in acinclude.m4
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+dmakeroot.h: $(top_builddir)/config.status dmakeroot.h.in
+	cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
+	  if test -f $$p \
+	  ; then \
+	    f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
+	   echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
+	   $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+	  else :; fi; \
+	done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; for p in $$list; do \
+	  f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
+	  echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
+	  rm -f $(DESTDIR)$(bindir)/$$f; \
+	done
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+dmake$(EXEEXT): $(dmake_OBJECTS) $(dmake_DEPENDENCIES) 
+	@rm -f dmake$(EXEEXT)
+	$(LINK) $(dmake_LDFLAGS) $(dmake_OBJECTS) $(dmake_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dag.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dmake.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dmdump.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dmstring.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/expand.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/function.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getinp.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/hash.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/imacs.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/infer.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/macparse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/make.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/parse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/path.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/percent.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/quit.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rulparse.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/stat.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/state.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/sysintf.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = .
+# Avoid unsightly `./'.
+distdir = $(PACKAGE)-$(VERSION)
+
+GZIP_ENV = --best
+
+distdir: $(DISTFILES)
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+	mkdir $(distdir)
+	$(mkinstalldirs) $(distdir)/.
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/=build
+	mkdir $(distdir)/=inst
+	chmod a-w $(distdir)
+	dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
+	  && cd $(distdir)/=build \
+	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
+	     || (echo "Error: files left after uninstall" 1>&2; \
+	         exit 1) ) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
+	  && rm -f $(distdir).tar.gz \
+	  && (test `find . -type f -print | wc -l` -eq 0 \
+	     || (echo "Error: files left after distclean" 1>&2; \
+	         exit 1) )
+	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
+	@echo "$(distdir).tar.gz is ready for distribution" | \
+	  sed 'h;s/./=/g;p;x;p;x'
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(PROGRAMS)
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(bindir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+dist-all: distdir
+	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
+distclean: distclean-recursive
+	-rm -f config.status config.cache config.log
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am: install-binPROGRAMS
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-binPROGRAMS uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-binPROGRAMS clean-generic clean-recursive dist dist-all \
+	distcheck distclean distclean-compile distclean-depend \
+	distclean-generic distclean-recursive distclean-tags distdir \
+	dvi dvi-am dvi-recursive info info-am info-recursive install \
+	install-am install-binPROGRAMS install-data install-data-am \
+	install-data-recursive install-exec install-exec-am \
+	install-exec-recursive install-info install-info-am \
+	install-info-recursive install-man install-recursive \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am installdirs-recursive maintainer-clean \
+	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-recursive \
+	tags tags-recursive uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-info-am \
+	uninstall-info-recursive uninstall-recursive
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/startup/Makefile.in b/dmake/startup/Makefile.in
new file mode 100644
index 000000000000..676a73ab1e8d
--- /dev/null
+++ b/dmake/startup/Makefile.in
@@ -0,0 +1,325 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+startupdir = $(datadir)/startup
+
+startup_DATA = startup.mk template.mk
+
+#SUBDIRS = mac msdos os2 qssl unix win95 winnt
+SUBDIRS = unix 
+subdir = startup
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(startup_DATA)
+
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = Makefile.am Makefile.in
+DIST_SUBDIRS = $(SUBDIRS)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  startup/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+install-startupDATA: $(startup_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+uninstall-startupDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(startupdir)/$$f"; \
+	  rm -f $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-startupDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am uninstall-startupDATA
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-generic clean-recursive distclean distclean-generic \
+	distclean-recursive distclean-tags distdir dvi dvi-am \
+	dvi-recursive info info-am info-recursive install install-am \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-info install-info-am install-info-recursive install-man \
+	install-recursive install-startupDATA install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	installdirs-recursive maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-recursive tags tags-recursive uninstall \
+	uninstall-am uninstall-info-am uninstall-info-recursive \
+	uninstall-recursive uninstall-startupDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/startup/unix/Makefile.in b/dmake/startup/unix/Makefile.in
new file mode 100644
index 000000000000..c83ce3f8e6e7
--- /dev/null
+++ b/dmake/startup/unix/Makefile.in
@@ -0,0 +1,325 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+startupdir = $(datadir)/startup/unix
+
+startup_DATA = macros.mk recipes.mk
+
+#SUBDIRS = 386ix bsd43 coherent linux macosx solaris sysvr1 sysvr3 sysvr4 xenix
+SUBDIRS = @OS_VERSION@
+subdir = startup/unix
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(startup_DATA)
+
+
+RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
+	uninstall-info-recursive all-recursive install-data-recursive \
+	install-exec-recursive installdirs-recursive install-recursive \
+	uninstall-recursive check-recursive installcheck-recursive
+DIST_COMMON = Makefile.am Makefile.in
+DIST_SUBDIRS = $(SUBDIRS)
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  startup/unix/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+install-startupDATA: $(startup_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+uninstall-startupDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(startupdir)/$$f"; \
+	  rm -f $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@set fnord $(MAKEFLAGS); amf=$$2; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	for subdir in $(SUBDIRS); do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d $(distdir)/$$subdir \
+	    || mkdir $(distdir)/$$subdir \
+	    || exit 1; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$(top_distdir)" \
+	        distdir=../$(distdir)/$$subdir \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-recursive
+
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-startupDATA
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am uninstall-startupDATA
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
+	clean-generic clean-recursive distclean distclean-generic \
+	distclean-recursive distclean-tags distdir dvi dvi-am \
+	dvi-recursive info info-am info-recursive install install-am \
+	install-data install-data-am install-data-recursive \
+	install-exec install-exec-am install-exec-recursive \
+	install-info install-info-am install-info-recursive install-man \
+	install-recursive install-startupDATA install-strip \
+	installcheck installcheck-am installdirs installdirs-am \
+	installdirs-recursive maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-recursive tags tags-recursive uninstall \
+	uninstall-am uninstall-info-am uninstall-info-recursive \
+	uninstall-recursive uninstall-startupDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/startup/unix/linux/Makefile.in b/dmake/startup/unix/linux/Makefile.in
new file mode 100644
index 000000000000..5d8c0c45eafa
--- /dev/null
+++ b/dmake/startup/unix/linux/Makefile.in
@@ -0,0 +1,206 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+startupdir = $(datadir)/startup/unix/linux
+
+startup_DATA = macros.mk 
+subdir = startup/unix/linux
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(startup_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  startup/unix/linux/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+install-startupDATA: $(startup_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+uninstall-startupDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(startupdir)/$$f"; \
+	  rm -f $(DESTDIR)$(startupdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-startupDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am uninstall-startupDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-startupDATA install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic uninstall uninstall-am \
+	uninstall-info-am uninstall-startupDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/startup/unix/macosx/Makefile.in b/dmake/startup/unix/macosx/Makefile.in
new file mode 100644
index 000000000000..a4fd0ca84fe8
--- /dev/null
+++ b/dmake/startup/unix/macosx/Makefile.in
@@ -0,0 +1,206 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+startupdir = $(datadir)/startup/unix/macosx
+
+startup_DATA = macros.mk 
+subdir = startup/unix/macosx
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(startup_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  startup/unix/macosx/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+install-startupDATA: $(startup_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+uninstall-startupDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(startupdir)/$$f"; \
+	  rm -f $(DESTDIR)$(startupdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-startupDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am uninstall-startupDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-startupDATA install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic uninstall uninstall-am \
+	uninstall-info-am uninstall-startupDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/startup/unix/solaris/Makefile.in b/dmake/startup/unix/solaris/Makefile.in
new file mode 100644
index 000000000000..512d8f379955
--- /dev/null
+++ b/dmake/startup/unix/solaris/Makefile.in
@@ -0,0 +1,206 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../../..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+startupdir = $(datadir)/startup/unix/solaris
+
+startup_DATA = macros.mk 
+subdir = startup/unix/solaris
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+DIST_SOURCES =
+DATA = $(startup_DATA)
+
+DIST_COMMON = Makefile.am Makefile.in
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  startup/unix/solaris/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+uninstall-info-am:
+install-startupDATA: $(startup_DATA)
+	@$(NORMAL_INSTALL)
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f"; \
+	  $(INSTALL_DATA) $$d$$p $(DESTDIR)$(startupdir)/$$f; \
+	done
+
+uninstall-startupDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(startup_DATA)'; for p in $$list; do \
+	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  echo " rm -f $(DESTDIR)$(startupdir)/$$f"; \
+	  rm -f $(DESTDIR)$(startupdir)/$$f; \
+	done
+tags: TAGS
+TAGS:
+
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ../../..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+
+installdirs:
+	$(mkinstalldirs) $(DESTDIR)$(startupdir)
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-startupDATA
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+uninstall-am: uninstall-info-am uninstall-startupDATA
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am info info-am install \
+	install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-startupDATA install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic uninstall uninstall-am \
+	uninstall-info-am uninstall-startupDATA
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/dmake/unix/Makefile.in b/dmake/unix/Makefile.in
new file mode 100755
index 000000000000..1607f9605864
--- /dev/null
+++ b/dmake/unix/Makefile.in
@@ -0,0 +1,287 @@
+# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+
+# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = @program_transform_name@
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+CC = @CC@
+CPP = @CPP@
+LN_S = @LN_S@
+OS_VERSION = @OS_VERSION@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+
+noinst_LIBRARIES = libunix.a
+
+libunix_a_SOURCES = arlib.c dcache.c dirbrk.c rmprq.c ruletab.c runargv.c tempnam.c
+
+INCLUDES = -I$(top_srcdir) -I$(top_builddir) -I$(top_srcdir)/unix/@OS_VERSION@/gnu -I$(top_srcdir)/unix  -I$(top_srcdir)/unix/@OS_VERSION@
+
+CFLAGS = -O
+subdir = unix
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+libunix_a_AR = $(AR) cru
+libunix_a_LIBADD =
+am_libunix_a_OBJECTS = arlib.$(OBJEXT) dcache.$(OBJEXT) dirbrk.$(OBJEXT) \
+	rmprq.$(OBJEXT) ruletab.$(OBJEXT) runargv.$(OBJEXT) \
+	tempnam.$(OBJEXT)
+libunix_a_OBJECTS = $(am_libunix_a_OBJECTS)
+
+DEFS = @DEFS@
+DEFAULT_INCLUDES =  -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/arlib.Po $(DEPDIR)/dcache.Po \
+@AMDEP_TRUE@	$(DEPDIR)/dirbrk.Po $(DEPDIR)/rmprq.Po \
+@AMDEP_TRUE@	$(DEPDIR)/ruletab.Po $(DEPDIR)/runargv.Po \
+@AMDEP_TRUE@	$(DEPDIR)/tempnam.Po
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+DIST_SOURCES = $(libunix_a_SOURCES)
+DIST_COMMON = Makefile.am Makefile.in
+SOURCES = $(libunix_a_SOURCES)
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .o .obj
+$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  unix/Makefile
+Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) && \
+	  CONFIG_HEADERS= CONFIG_LINKS= \
+	  CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
+
+AR = ar
+
+clean-noinstLIBRARIES:
+	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+libunix.a: $(libunix_a_OBJECTS) $(libunix_a_DEPENDENCIES) 
+	-rm -f libunix.a
+	$(libunix_a_AR) libunix.a $(libunix_a_OBJECTS) $(libunix_a_LIBADD)
+	$(RANLIB) libunix.a
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT) core *.core
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/arlib.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dcache.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/dirbrk.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/rmprq.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/ruletab.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/runargv.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/tempnam.Po@am__quote@
+
+distclean-depend:
+	-rm -rf $(DEPDIR)
+
+.c.o:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
+
+.c.obj:
+@AMDEP_TRUE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
+@AMDEP_TRUE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+	$(COMPILE) -c `cygpath -w $<`
+CCDEPMODE = @CCDEPMODE@
+uninstall-info-am:
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique $(LISP)
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+	  || etags $(ETAGS_ARGS) $$tags  $$unique $(LISP)
+
+GTAGS:
+	here=`CDPATH=: && cd $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+
+top_distdir = ..
+distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+
+distdir: $(DISTFILES)
+	@for file in $(DISTFILES); do \
+	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    $(mkinstalldirs) "$(distdir)/$$dir"; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    cp -pR $$d/$$file $(distdir) \
+	    || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(LIBRARIES)
+
+installdirs:
+
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am
+
+distclean: distclean-am
+
+distclean-am: clean-am distclean-compile distclean-depend \
+	distclean-generic distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+uninstall-am: uninstall-info-am
+
+.PHONY: GTAGS all all-am check check-am clean clean-generic \
+	clean-noinstLIBRARIES distclean distclean-compile \
+	distclean-depend distclean-generic distclean-tags distdir dvi \
+	dvi-am info info-am install install-am install-data \
+	install-data-am install-exec install-exec-am install-info \
+	install-info-am install-man install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
+	mostlyclean-generic tags uninstall uninstall-am \
+	uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: