execute move of global headers

see https://gerrit.libreoffice.org/#/c/3367/
and Change-Id: I00c96fa77d04b33a6f8c8cd3490dfcd9bdc9e84a for details

Change-Id: I199a75bc4042af20817265d5ef85b1134a96ff5a

1 files changed, 210 insertions, 0 deletions

diff --git a/include/svx/svdomeas.hxx b/include/svx/svdomeas.hxx
new file mode 100644
index 000000000000..439ceb25682d
--- /dev/null
+++ b/include/svx/svdomeas.hxx
@@ -0,0 +1,210 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#ifndef _SVDOMEAS_HXX
+#define _SVDOMEAS_HXX
+
+#include <svx/svdotext.hxx>
+#include "svx/svxdllapi.h"
+#include <editeng/measfld.hxx>
+
+//************************************************************
+//   Vorausdeklarationen
+//************************************************************
+
+class SdrOutliner;
+struct ImpMeasureRec;
+struct ImpMeasurePoly;
+
+namespace sdr { namespace properties {
+    class MeasureProperties;
+}}
+
+//************************************************************
+//   Hilfsklasse SdrMeasureObjGeoData
+//************************************************************
+
+class SdrMeasureObjGeoData : public SdrTextObjGeoData
+{
+public:
+    Point                       aPt1;
+    Point                       aPt2;
+
+public:
+    SdrMeasureObjGeoData();
+    virtual ~SdrMeasureObjGeoData();
+};
+
+//************************************************************
+//   SdrMeasureObj
+//************************************************************
+
+class SVX_DLLPUBLIC SdrMeasureObj : public SdrTextObj
+{
+private:
+    // to allow sdr::properties::MeasureProperties access to SetTextDirty()
+    friend class sdr::properties::MeasureProperties;
+
+    friend class                SdrMeasureField;
+
+protected:
+    virtual sdr::contact::ViewContact* CreateObjectSpecificViewContact();
+    virtual sdr::properties::BaseProperties* CreateObjectSpecificProperties();
+
+    Point                       aPt1;
+    Point                       aPt2;
+    bool                        bTextDirty;
+
+protected:
+    void ImpTakeAttr(ImpMeasureRec& rRec) const;
+    void TakeRepresentation( XubString& rStr, SdrMeasureFieldKind eMeasureFieldKind ) const;
+    void ImpCalcGeometrics(const ImpMeasureRec& rRec, ImpMeasurePoly& rPol) const;
+    basegfx::B2DPolyPolygon ImpCalcXPoly(const ImpMeasurePoly& rPol) const;
+    void ImpEvalDrag(ImpMeasureRec& rRec, const SdrDragStat& rDrag) const;
+    void SetTextDirty() { bTextDirty=sal_True; SetTextSizeDirty(); if (!aOutRect.IsEmpty()) { SetBoundRectDirty(); SetRectsDirty(sal_True); } }
+    void UndirtyText() const;
+
+    virtual SdrObjGeoData* NewGeoData() const;
+    virtual void SaveGeoData(SdrObjGeoData& rGeo) const;
+    virtual void RestGeoData(const SdrObjGeoData& rGeo);
+
+public:
+    TYPEINFO();
+    SdrMeasureObj();
+    SdrMeasureObj(const Point& rPt1, const Point& rPt2);
+    virtual ~SdrMeasureObj();
+
+    virtual void TakeObjInfo(SdrObjTransformInfoRec& rInfo) const;
+    virtual sal_uInt16 GetObjIdentifier() const;
+    virtual void TakeUnrotatedSnapRect(Rectangle& rRect) const;
+    virtual SdrMeasureObj* Clone() const;
+
+    virtual void TakeObjNameSingul(String& rName) const;
+    virtual void TakeObjNamePlural(String& rName) const;
+
+    virtual basegfx::B2DPolyPolygon TakeXorPoly() const;
+    virtual sal_uInt32 GetHdlCount() const;
+    virtual SdrHdl* GetHdl(sal_uInt32 nHdlNum) const;
+
+    // special drag methods
+    virtual bool hasSpecialDrag() const;
+    virtual bool beginSpecialDrag(SdrDragStat& rDrag) const;
+    virtual bool applySpecialDrag(SdrDragStat& rDrag);
+    virtual String getSpecialDragComment(const SdrDragStat& rDrag) const;
+
+    virtual bool BegCreate(SdrDragStat& rStat);
+    virtual bool MovCreate(SdrDragStat& rStat);
+    virtual bool EndCreate(SdrDragStat& rStat, SdrCreateCmd eCmd);
+    virtual bool BckCreate(SdrDragStat& rStat);
+    virtual void BrkCreate(SdrDragStat& rStat);
+    virtual basegfx::B2DPolyPolygon TakeCreatePoly(const SdrDragStat& rDrag) const;
+    virtual Pointer GetCreatePointer() const;
+
+    virtual void NbcMove(const Size& rSiz);
+    virtual void NbcResize(const Point& rRef, const Fraction& xFact, const Fraction& yFact);
+    virtual void NbcRotate(const Point& rRef, long nWink, double sn, double cs);
+    virtual void NbcMirror(const Point& rRef1, const Point& rRef2);
+    virtual void NbcShear(const Point& rRef, long nWink, double tn, bool bVShear);
+    virtual long GetRotateAngle() const;
+    virtual void RecalcSnapRect();
+
+    virtual sal_uInt32 GetSnapPointCount() const;
+    virtual Point GetSnapPoint(sal_uInt32 i) const;
+
+    virtual sal_Bool IsPolyObj() const;
+    virtual sal_uInt32 GetPointCount() const;
+    virtual Point GetPoint(sal_uInt32 i) const;
+    virtual void NbcSetPoint(const Point& rPnt, sal_uInt32 i);
+
+    virtual SdrObject* DoConvertToPolyObj(sal_Bool bBezier, bool bAddText) const;
+
+    virtual sal_Bool BegTextEdit(SdrOutliner& rOutl);
+    virtual const Size& GetTextSize() const;
+    virtual void TakeTextRect( SdrOutliner& rOutliner, Rectangle& rTextRect, bool bNoEditText = false,
+        Rectangle* pAnchorRect=NULL, bool bLineWidth = true ) const;
+    virtual void TakeTextAnchorRect(Rectangle& rAnchorRect) const;
+    virtual void TakeTextEditArea(Size* pPaperMin, Size* pPaperMax, Rectangle* pViewInit, Rectangle* pViewMin) const;
+    virtual sal_uInt16 GetOutlinerViewAnchorMode() const;
+    virtual void NbcSetOutlinerParaObject(OutlinerParaObject* pTextObject);
+    virtual OutlinerParaObject* GetOutlinerParaObject() const;
+
+    virtual bool CalcFieldValue(const SvxFieldItem& rField, sal_uInt16 nPara, sal_uInt16 nPos,
+        bool bEdit, Color*& rpTxtColor, Color*& rpFldColor, String& rRet) const;
+
+    // #i97878#
+    virtual sal_Bool TRGetBaseGeometry(basegfx::B2DHomMatrix& rMatrix, basegfx::B2DPolyPolygon& rPolyPolygon) const;
+    virtual void TRSetBaseGeometry(const basegfx::B2DHomMatrix& rMatrix, const basegfx::B2DPolyPolygon& rPolyPolygon);
+};
+
+/////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// Creating:
+// ~~~~~~~~~
+// Dragging von Bezugspunkt 1 zu Bezugspunkt 2 -> Bezugskante
+//
+// Die Defaults:
+// ~~~~~~~~~~~~~
+// Masslinie und Masshilfslinien: Haarlinien solid schwarz
+// Pfeile:     2mm x 4mm
+// Textgroesse
+//                              ___
+//     |        Masszahl       | 2mm
+//     |<--------------------->|---
+//     |                       | 8mm
+//     |                       |
+//    Pt1============#        Pt2-- <----Bezugskante (von Pt1 nach Pt2)
+//     #             #         |___ <- Ueberstand der Masshilfslinie(n)
+//     #             #=========#
+//     # Zu bemassendes Objekt #
+//     #=======================#
+//
+// Attribute:
+// ~~~~~~~~~~
+// 1. Wo steht der Text: mitte, rechts oder links (def=automatik)
+// 2. Text oberhalb der Linie oder unterhalb oder Linie unterbrochen durch Text (def=automatik)
+// 3. Den Abstand der Masslinie zur Bezugskante (=zum bemassten Objekt).
+//    Default=8mm
+// 4. Masslinie unterhalb der Bezugskante (default=nein)
+// 5. Die Ueberlaenge(n) der Masshilfslinien ueber die Bezugskante (2x, default=0)
+// 6. Den Ueberhang der Masshilfslinien ueber die Masslinie (default=2mm)
+// 7. Den Abstand der Masshilfslinien zur Bezugskante
+//
+// Dragging:                    Handle          Shift
+// ~~~~~~~~~
+// -  Die Bezugspunkte        SolidQuadHdl   nur die Laenge
+// 1.+2. Anpacken des Textes
+// 3.+4. Hdl am Pfeil (2x)    SolidQuadHdl   nur den Bool
+// 5.    Hdl am Endpunkt      CircHdl        beide Laengen?
+// 6.+7. Kein Dragging
+//
+// Offen:
+// ~~~~~~
+// - Radien (gleich als Typ verankern
+//
+// Special:
+// ~~~~~~~~
+// Connecting an max. 2 Objekte
+// -> Bei Copy, etc. den entspr. Code der Verbinder verwenden?!?
+// wird wohl recht kompliziert werden ...
+//
+/////////////////////////////////////////////////////////////////////////////////////////////////
+
+#endif //_SVDOMEAS_HXX
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */