Remove dead registry/workben/ stuff

Change-Id: Ie777efded5a5ebe3aad8d2310e174e6f32a21bc3

4 files changed, 0 insertions, 710 deletions

diff --git a/registry/workben/makefile.mk b/registry/workben/makefile.mk
deleted file mode 100644
index 7d904645fef3..000000000000
--- a/registry/workben/makefile.mk
+++ /dev/null
@@ -1,77 +0,0 @@
-#
-# This file is part of the LibreOffice project.
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-#
-# This file incorporates work covered by the following license notice:
-#
-#   Licensed to the Apache Software Foundation (ASF) under one or more
-#   contributor license agreements. See the NOTICE file distributed
-#   with this work for additional information regarding copyright
-#   ownership. The ASF licenses this file to you under the Apache
-#   License, Version 2.0 (the "License"); you may not use this file
-#   except in compliance with the License. You may obtain a copy of
-#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
-#
-
-PRJ=..
-
-PRJNAME=registry
-TARGET=regtest
-TARGETTYPE=CUI
-LIBTARGET=NO
-
-ENABLE_EXCEPTIONS := TRUE
-
-# --- Settings -----------------------------------------------------
-.INCLUDE :  settings.mk
-
-# --- Files --------------------------------------------------------
-CDEFS += -DDLL_VERSION=$(EMQ)"$(DLLPOSTFIX)$(EMQ)"
-
-RGTLIB = rgt.lib
-.IF "$(OS)"!="WNT"
-RGTLIB = -lrgt$(DLLPOSTFIX)
-.ENDIF
-
-
-CXXFILES= 	regtest.cxx   	\
-            test.cxx		\
-            regspeed.cxx
-
-
-APP1TARGET= $(TARGET)
-APP1OBJS=   $(OBJ)$/regtest.obj 
-
-APP1STDLIBS=\
-            $(SALLIB)	\
-            $(REGLIB)
-
-APP2TARGET= test
-APP2OBJS=   $(OBJ)$/test.obj
-APP2RPATH=NONE
-.IF "$(OS)"!="WNT" && "$(OS)"!="MACOSX"
-
-.IF "$(OS)"=="LINUX" || "$(OS)"=="FREEBSD"
-APP2LINKFLAGS=-Wl,-z,origin -Wl,-rpath,\''$$ORIGIN:$$ORIGIN/../lib'\'
-.ENDIF
-
-.IF "$(OS)"=="SOLARIS"
-APP2LINKFLAGS=-R\''$$ORIGIN/../lib:$$ORIGIN'\'
-.ENDIF
-    
-.ENDIF # "$(OS)"=="UNX"
-    
-APP2STDLIBS=\
-            $(RGTLIB)
-
-APP3TARGET= regspeed
-APP3OBJS=   $(OBJ)$/regspeed.obj
-
-APP3STDLIBS=\
-            $(SALLIB)	\
-            $(REGLIB) 	 
-
-.INCLUDE :  target.mk
diff --git a/registry/workben/regspeed.cxx b/registry/workben/regspeed.cxx
deleted file mode 100644
index cce5234c49e2..000000000000
--- a/registry/workben/regspeed.cxx
+++ /dev/null
@@ -1,257 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*
- * This file is part of the LibreOffice project.
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- *
- * This file incorporates work covered by the following license notice:
- *
- *   Licensed to the Apache Software Foundation (ASF) under one or more
- *   contributor license agreements. See the NOTICE file distributed
- *   with this work for additional information regarding copyright
- *   ownership. The ASF licenses this file to you under the Apache
- *   License, Version 2.0 (the "License"); you may not use this file
- *   except in compliance with the License. You may obtain a copy of
- *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
- */
-
-
-#include <iostream>
-#include <stdio.h>
-#include <stdlib.h>
-#include <time.h>
-#include <sys/timeb.h>
-#include <sys/types.h>
-
-#include "registry/registry.h"
-#include <rtl/ustring.hxx>
-#include <rtl/alloc.h>
-
-using namespace std;
-
-/*****************************************************************
-    MyTimer
-*****************************************************************/
-#ifndef UNX
-class MyTimer
-{
-public:
-    void start() { _ftime( &m_start ); };
-    void stop()
-    {
-        _ftime( &m_stop );
-        m_diff = difftime(m_stop.time, m_start.time);
-        if (m_stop.millitm > m_start.millitm)
-        {
-            m_diff += ((double)(m_stop.millitm - m_start.millitm)) / 1000;
-        }
-        else
-        {
-            m_diff -= 1;
-            m_diff += ((double)(1000 - (m_start.millitm - m_stop.millitm))) / 1000;
-        }
-        printf(" %.4f Sekunden\n", m_diff);
-    };
-
-protected:
-    struct _timeb m_start, m_stop;
-    double m_diff;
-};
-#else
-extern "C" int ftime(struct timeb *pt);
-
-class MyTimer
-{
-public:
-    void start() { ftime( &m_start ); };
-    void stop()
-    {
-        ftime( &m_stop );
-        m_diff = difftime(m_stop.time, m_start.time);
-        if (m_stop.millitm > m_start.millitm)
-        {
-            m_diff += ((double)(m_stop.millitm - m_start.millitm)) / 1000;
-        }
-        else
-        {
-            m_diff -= 1;
-            m_diff += ((double)(1000 - (m_start.millitm - m_stop.millitm))) / 1000;
-        }
-        printf(" %.4f Sekunden\n", m_diff);
-    };
-
-protected:
-    struct timeb m_start, m_stop;
-    double m_diff;
-};
-#endif
-
-
-#if (defined UNX)
-int main( int argc, char * argv[] )
-#else
-int _cdecl main( int argc, char * argv[] )
-#endif
-{
-    RegHandle       hReg;
-    RegKeyHandle    hRootKey, hKey, hSubKey, hSubSubKey;
-    OUString        sName1("regkey");
-    OUString        sName2("regSubkey");
-    OUString        sName3("regSubSubkey");
-    OUString        keyName1;
-    OUString        keyName2;
-    OUString        keyName3;
-    int             S1 = 10;
-    int             S2 = 10;
-    int             S3 = 10;
-    MyTimer         aTimer;
-
-    if (argc < 4)
-    {
-        cerr << "using regspeed count1 count2 count3\n";
-        exit(1);
-    }
-
-    S1 = atoi(argv[1]);
-    S2 = atoi(argv[2]);
-    S3 = atoi(argv[3]);
-
-    OUString speedReg( "speed.reg");
-    if (reg_createRegistry(speedReg.pData, &hReg))
-    {
-        cout << "creating registry \"test.reg\" failed\n";
-    } else
-    {
-        if (reg_openRootKey(hReg, &hRootKey))
-        {
-            cout << "open root key \"test.reg\" failed\n";
-        } else
-        {
-            printf("\n %d keys anlegen, oeffnen und schliessen dauert ... ", (S1 * S2 * S3));
-            aTimer.start();
-
-            for (sal_Int32 i=0; i < S1; i++)
-            {
-                keyName1 = sName1;
-                keyName1 += OUString().valueOf(i);
-                if (reg_createKey(hRootKey, keyName1.pData, &hKey))
-                    cout << "creating key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
-                         << "\" failed\n";
-
-                for (sal_Int32 j=0; j < S2; j++)
-                {
-                    keyName2 = sName2;
-                    keyName2 += OUString().valueOf(j);
-                    if (reg_createKey(hKey, keyName2.pData, &hSubKey))
-                        cout << "creating key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
-                             << "\" failed\n";
-
-                        for (sal_Int32 n=0; n < S3; n++)
-                        {
-                            keyName3 = sName3;
-                            keyName3 += OUString().valueOf(n);
-                            if (reg_createKey(hSubKey, keyName3.pData, &hSubSubKey))
-                                cout << "creating key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                                     << "\" failed\n";
-
-                            if (reg_closeKey(hSubSubKey))
-                                cout << "closing key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                                     << "\" failed\n";
-                        }
-
-                    if (reg_closeKey(hSubKey))
-                        cout << "closing key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
-                             << "\" failed\n";
-                }
-
-                if (reg_closeKey(hKey))
-                    cout << "closing key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
-                         << "\" failed\n";
-            }
-
-            aTimer.stop();
-
-            printf("\n %d keys oeffnen und schliessen dauert ... ", (S1 * S2 * S3));
-            aTimer.start();
-
-            for (sal_Int32 i=0; i < S1; i++)
-            {
-                keyName1 = "/";
-                keyName1 += sName1;
-                keyName1 += OUString().valueOf(i);
-                if (reg_openKey(hRootKey, keyName1.pData, &hKey))
-                    cout << "open key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
-                         << "\" failed\n";
-
-                for (sal_Int32 j=0; j < S2; j++)
-                {
-                    keyName2 = "/";
-                    keyName2 += sName1;
-                    keyName2 += OUString().valueOf(i);
-                    keyName2 += "/";
-                    keyName2 += sName2;
-                    keyName2 += OUString().valueOf(j);
-                    if (reg_openKey(hRootKey, keyName2.pData, &hSubKey))
-                        cout << "open key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
-                             << "\" failed\n";
-
-                        for (sal_Int32 n=0; n < S3; n++)
-                        {
-                            keyName3 = "/";
-                            keyName3 += sName1;
-                            keyName3 += OUString().valueOf(i);
-                            keyName3 += "/";
-                            keyName3 += sName2;
-                            keyName3 += OUString().valueOf(j);
-                            keyName3 += "/";
-                            keyName3 += sName3;
-                            keyName3 += OUString().valueOf(n);
-                            if (reg_openKey(hRootKey, keyName3.pData, &hSubSubKey))
-                                cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                                     << "\" failed\n";
-
-                            if (reg_closeKey(hSubSubKey))
-                                cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                                     << "\" failed\n";
-                        }
-
-                    if (reg_closeKey(hSubKey))
-                        cout << "closing key \"" << OUStringToOString(keyName2, RTL_TEXTENCODING_ASCII_US).getStr()
-                             << "\" failed\n";
-                }
-
-                if (reg_closeKey(hKey))
-                    cout << "closing key \"" << OUStringToOString(keyName1, RTL_TEXTENCODING_ASCII_US).getStr()
-                         << "\" failed\n";
-            }
-
-            aTimer.stop();
-
-            printf("\n 1 key oeffnen und schliessen dauert ... ");
-            aTimer.start();
-
-            if (reg_openKey(hRootKey, keyName3.pData, &hSubSubKey))
-                cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                     << "\" failed\n";
-
-            if (reg_closeKey(hSubSubKey))
-                cout << "open key \"" << OUStringToOString(keyName3, RTL_TEXTENCODING_ASCII_US).getStr()
-                     << "\" failed\n";
-
-            aTimer.stop();
-
-        }
-
-        if (reg_closeKey(hRootKey))
-            cout << "closing root key failed\n";
-        if (reg_closeRegistry(hReg))
-            cout << "\t41. closing registry \"test.reg\" failed\n";
-    }
-
-    return 0;
-}
-
-
-/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/registry/workben/regtest.cxx b/registry/workben/regtest.cxx
deleted file mode 100644
index cf6b06dfd03e..000000000000
--- a/registry/workben/regtest.cxx
+++ /dev/null
@@ -1,331 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*
- * This file is part of the LibreOffice project.
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- *
- * This file incorporates work covered by the following license notice:
- *
- *   Licensed to the Apache Software Foundation (ASF) under one or more
- *   contributor license agreements. See the NOTICE file distributed
- *   with this work for additional information regarding copyright
- *   ownership. The ASF licenses this file to you under the Apache
- *   License, Version 2.0 (the "License"); you may not use this file
- *   except in compliance with the License. You may obtain a copy of
- *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
- */
-
-
-#include <iostream>
-#include <stdio.h>
-
-#include "registry/registry.h"
-#include <rtl/ustring.hxx>
-#include <rtl/alloc.h>
-
-using namespace std;
-
-
-#if (defined UNX)
-int main()
-#else
-int _cdecl main()
-#endif
-{
-    RegHandle       hReg;
-    RegKeyHandle    hRootKey, hKey1, hKey2, hKey3, hKey4, hKey5;
-
-    cout << "\n     Simple Registry Test !!!     \n\n";
-
-    if (reg_createRegistry(OUString("test4.rdb").pData, &hReg))
-        cout << "\t0. creating registry \"test4.rdb\" failed\n";
-    else
-        cout << "0. registry test4.rdb is created\n";
-
-    if (reg_openRootKey(hReg, &hRootKey))
-        cout << "1. open root key \"test4.rdb\" failed\n";
-    else
-        cout << "1. root key of \"test4.rdb\" is opened\n";
-
-    if (reg_createKey(hRootKey, OUString("myFirstKey").pData, &hKey1))
-        cout << "\t2. creating key \"myFirstKey\" failed\n";
-    else
-        cout << "2. key \"myFirstKey\" is created\n";
-    if (reg_createKey(hRootKey, OUString("mySecondKey").pData, &hKey2))
-        cout << "\t3. creating key \"mySecondKey\" failed\n";
-    else
-        cout << "3. key \"mySecondKey\" is created\n";
-    if (reg_createKey(hKey1, OUString("myFirstSubKey").pData, &hKey3))
-        cout << "\t4. creating subkey \"myFirstSubKey\" failed\n";
-    else
-        cout << "4. subkey \"myFirstSubKey\" is created\n";
-    if (reg_createKey(hKey1, OUString("mySecondSubKey").pData, &hKey4))
-        cout << "\t5. creating subkey \"mySecondSubKey\" failed\n";
-    else
-        cout << "5. subkey \"mySecondSubKey\" is created\n";
-    if (reg_createKey(hRootKey, OUString("myThirdKey").pData, &hKey5))
-        cout << "\t6. creating key \"myThirdKey\" is created\n\n";
-    else
-        cout << "6. key \"myThirdKey\" is created\n\n";
-
-
-    RegKeyHandle*   phSubKeys;
-    sal_uInt32      nSubKeys;
-    if (reg_openSubKeys(hRootKey, OUString("myFirstKey").pData, &phSubKeys, &nSubKeys))
-        cout << "\t7. open subkeys of \"myfirstKey\" failed\n";
-    else
-        cout << "7. open " << nSubKeys << "subkeys of \"myfirstKey\"\n";
-
-    OUString keyName;
-    if (reg_getKeyName(phSubKeys[0], &keyName.pData))
-        cout << "\tname of subkey 1 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n";
-    if (reg_getKeyName(phSubKeys[1], &keyName.pData))
-        cout << "\tname of subkey 2 = " << OUStringToOString(keyName, RTL_TEXTENCODING_ASCII_US).getStr() << "\n";
-
-    if (reg_closeSubKeys(phSubKeys, nSubKeys))
-        cout << "\t8. close subkeys of \"myfirstKey\" failed\n\n";
-    else
-        cout << "8. close " << nSubKeys << "subkeys of \"myfirstKey\"\n\n";
-
-
-    char* Value=(char*)"Mein erster Value";
-    if (reg_setValue(hRootKey, OUString("mySecondKey").pData, RegValueType::STRING, Value, 18))
-        cout << "\t9. setValue of key \"mySecondKey\" failed\n";
-    else
-        cout << "9. setValue (string Value)  of key \"mySecondKey\"\n";
-
-    RegValueType    valueType;
-    sal_uInt32      valueSize;
-    sal_Char*       readValue;
-    if (reg_getValueInfo(hRootKey, OUString("mySecondKey").pData, &valueType, &valueSize))
-        cout << "\t10. getValueInfo of key \"mySecondKey\" failed\n";
-    else
-        cout << "10. getValueInfo of key \"mySecondKey\"\n";
-
-    readValue = (sal_Char*)rtl_allocateMemory(valueSize);
-    if (reg_getValue(hKey2, OUString().pData, readValue))
-        cout << "\t11. getValue of key \"mySecondKey\" failed\n";
-    else
-    {
-        cout << "11. getValue of key \"mySecondKey\"\n";
-
-        cout << "read Value,\n\tvalueType = " << (long)valueType
-              << "\n\tvalueSize = " << valueSize
-             << "\n\tvalue = " << readValue << "\n\n";
-    }
-    rtl_freeMemory(readValue);
-
-    if (reg_closeKey(hKey1) ||
-        reg_closeKey(hKey3) ||
-        reg_closeKey(hKey4))
-        cout << "\t12. closing \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" failed\n";
-    else
-        cout << "12. keys \"myFirstKey\" \"myfistSubKey\" \"mySecondSubKey\" are closed\n";
-
-    if (reg_deleteKey(hRootKey, OUString("myFirstKey").pData))
-        cout << "13.\t delete key \"myFirstKey\" failed\n";
-    else
-        cout << "13. key \"myFirstKey\" is deleted\n";
-
-    if (reg_closeKey(hKey2))
-        cout << "\t14. closing key \"mySecondKey\" failed\n";
-    else
-        cout << "14. key \"mySecondKey\" is closed\n";
-
-    if (reg_openKey(hRootKey, OUString("mySecondKey").pData, &hKey2))
-        cout << "\n15. open key \"mySecondKey\" failed\n";
-    else
-        cout << "15. key \"mySecondKey\" is opended\n";
-
-    if (reg_closeKey(hKey5))
-        cout << "\t15. closing key \"myThirdSubKey\" failed\n";
-    else
-        cout << "15. key \"myThirdSubKey\" is closed\n";
-    if (reg_deleteKey(hRootKey, OUString("myThirdKey").pData))
-        cout << "\t16. delete key \"myThirdKey\" failed\n";
-    else
-        cout << "16. key \"myThirdKey\" is deleted\n";
-
-    if (reg_openKey(hRootKey, OUString("myThirdKey").pData, &hKey5))
-        cout << "\t17. open key \"myThirdKey\" failed\n";
-    else
-        cout << "17. key \"myThirdKey\" is opened\n";
-
-    cout << "\n close open keys\n\n";
-
-    if (reg_closeKey(hKey2))
-        cout << "\t18. closing key \"mySecondKey\" failed\n";
-    else
-        cout << "18. key \"mySecondKey\" is closed\n";
-
-    if (reg_closeKey(hRootKey))
-        cout << "\t19. closing root key failed\n";
-    else
-        cout << "19. root key is closed\n";
-
-    if (reg_closeRegistry(hReg))
-        cout << "\t20. closing registry \"test4.rdb\" failed\n";
-    else
-        cout << "20. registry \"test4.rdb\" is closed\n";
-
-    // Test loadkey
-    cout << "\nTest load key\n\n";
-
-    RegHandle       hReg2;
-    RegKeyHandle    hRootKey2, h2Key1, h2Key2, h2Key3, h2Key4, h2Key5;
-
-    if (reg_createRegistry(OUString("test5.rdb").pData, &hReg2))
-        cout << "\t21. creating registry \"test5.rdb\" failed\n";
-    else
-        cout << "21. registry \"test5.rdb\" is created\n";
-
-    if (reg_openRootKey(hReg2, &hRootKey2))
-        cout << "\t22. open root key of \"test5.rdb\" failed\n";
-    else
-        cout << "22. root key of \"test5.rdb\" is opened\n";
-
-    if (reg_createKey(hRootKey2, OUString("reg2FirstKey").pData, &h2Key1))
-        cout << "\t23. creating key \"reg2FirstKey\" failed\n";
-    else
-        cout << "23. key \"reg2FirstKey\" is created\n";
-    if (reg_createKey(hRootKey2, OUString("reg2SecondKey").pData, &h2Key2))
-        cout << "\t24. creating key \"reg2SecondKey\" failed\n";
-    else
-        cout << "24. key \"reg2SecondKey\" is created\n";
-    if (reg_createKey(h2Key1, OUString("reg2FirstSubKey").pData, &h2Key3))
-        cout << "\t25. creating key \"reg2FirstSubKey\" failed\n";
-    else
-        cout << "25. key \"reg2FirstSubKey\" is created\n";
-    if (reg_createKey(h2Key1, OUString("reg2SecondSubKey").pData, &h2Key4))
-        cout << "\26. creating key \"reg2SecondSubKey\" failed\n";
-    else
-        cout << "26. key \"reg2SecondSubKey\" is created\n";
-    if (reg_createKey(hRootKey2, OUString("reg2ThirdKey").pData, &h2Key5))
-        cout << "\n27. creating key \"reg2ThirdKey\" failed\n";
-    else
-        cout << "27. key \"reg2ThirdKey\" is created\n";
-
-    sal_uInt32 nValue= 123456789;
-    if (reg_setValue(h2Key3, OUString().pData, RegValueType::LONG, &nValue, sizeof(sal_uInt32)))
-        cout << "\t27.b) setValue of key \"reg2FirstSubKey\" failed\n";
-    else
-        cout << "27.b). setValue (long Value)  of key \"reg2FirstSubKey\"\n";
-
-    if (reg_closeKey(h2Key1) ||
-        reg_closeKey(h2Key2) ||
-        reg_closeKey(h2Key3) ||
-        reg_closeKey(h2Key4) ||
-        reg_closeKey(h2Key5))
-        cout << "\n\t28. closing keys of \"test5.rdb\" failed\n";
-    else
-        cout << "\n28. all keys of \"test5.rdb\" closed\n";
-
-    if (reg_closeKey(hRootKey2))
-        cout << "\t29. root key of \"test5.rdb\" failed\n";
-    else
-        cout << "29. root key of \"test5.rdb\" is closed\n";
-
-    if (reg_closeRegistry(hReg2))
-        cout << "\t30. registry test5.rdb is closed\n";
-    else
-        cout << "30. registry test5.rdb is closed\n";
-
-    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg, RegAccessMode::READWRITE))
-        cout << "\t31. registry test4.rdb is opened\n";
-    else
-        cout << "31. registry test4.rdb is opened\n";
-
-    if (reg_openRootKey(hReg, &hRootKey))
-        cout << "\t32. open root key of \"test4.rdb\" is failed\n";
-    else
-        cout << "32. root key of \"test4.rdb\" is opened\n";
-
-    if (reg_loadKey(hRootKey, OUString("allFromTest2").pData,
-                    OUString("test5.rdb").pData))
-        cout << "\n\t33. load all keys from \"test5.rdb\" under key \"allFromTest2\" failed\n";
-    else
-        cout << "\n33. load all keys from test5.rdb under key \"allFromTest2\"\n";
-
-    if (reg_saveKey(hRootKey, OUString("allFromTest2").pData,
-                    OUString("test6.rdb").pData))
-        cout << "\n\t34. save all keys under \"allFromTest2\" in test6.rdb\n";
-    else
-        cout << "\n34. save all keys under \"allFromTest2\" in test6.rdb\n";
-
-
-    if (reg_createKey(hRootKey, OUString("allFromTest3").pData, &hKey1))
-        cout << "\t35. creating key \"allFromTest3\" failed\n";
-    else
-        cout << "36. key \"allFromTest3\" is created\n";
-    if (reg_createKey(hKey1, OUString("myFirstKey2").pData, &hKey2))
-        cout << "\t37. creating key \"myFirstKey2\" failed\n";
-    else
-        cout << "37. key \"myFirstKey2\" is created\n";
-    if (reg_createKey(hKey1, OUString("mySecondKey2").pData, &hKey3))
-        cout << "\t38. creating key \"mySecondKey2\" failed\n";
-    else
-        cout << "38. key \"mySecondKey2\" is created\n";
-
-    if (reg_mergeKey(hRootKey, OUString("allFromTest3").pData,
-                    OUString("test6.rdb").pData, sal_False, sal_False))
-        cout << "\n\t39. merge all keys under \"allFromTest2\" with all in test6.rdb\n";
-    else
-        cout << "\n39. merge all keys under \"allFromTest2\" with all in test6.rdb\n";
-
-    if (reg_closeKey(hKey1))
-        cout << "\n\t40. closing key \"allFromTest3\" of \"test5.rdb\" failed\n";
-    else
-        cout << "\n40. closing key \"allFromTest3\" of \"test5.rdb\"\n";
-    if (reg_closeKey(hKey2))
-        cout << "\n\t41. closing key \"myFirstKey2\" of \"test5.rdb\" failed\n";
-    else
-        cout << "\n41. closing key \"myFirstKey2\" of \"test5.rdb\"\n";
-    if (reg_closeKey(hKey3))
-        cout << "\n\t42. closing key \"mySecondKey2\" of \"test5.rdb\" failed\n";
-    else
-        cout << "\n42. closing key \"mySecondKey2\" of \"test5.rdb\"\n";
-
-
-    if (reg_deleteKey(hRootKey, OUString("/allFromTest3/reg2FirstKey/reg2FirstSubKey").pData))
-        cout << "\n\t43. delete key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" failed\n";
-    else
-        cout << "\n43. key \"/allFromTest3/reg2FirstKey/reg2FirstSubKey\" is deleted\n";
-
-    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg2, RegAccessMode::READONLY))
-        cout << "\n\t44. registry test4.rdb is opened for read only\n";
-    else
-        cout << "\n44. registry test4.rdb is opened for read only\n";
-
-    RegHandle hReg3;
-    if (reg_openRegistry(OUString("test4.rdb").pData, &hReg3, RegAccessMode::READONLY))
-        cout << "\n\t44.a). registry test4.rdb is opened for read only\n";
-    else
-        cout << "\n44.a). registry test4.rdb is opened for read only\n";
-
-    if (reg_closeRegistry(hReg2))
-        cout << "\t45. closing registry \"test4.rdb\" failed\n";
-    else
-        cout << "45. registry \"test4.rdb\" is closed\n";
-
-    if (reg_closeKey(hRootKey))
-        cout << "\n\t46. closing root key of \"test4.rdb\" failed\n";
-    else
-        cout << "\n46. root key of \"test4.rdb\" is closed\n";
-
-    if (reg_closeRegistry(hReg))
-        cout << "\t47. closing registry \"test4.rdb\" failed\n";
-    else
-        cout << "47. registry \"test4.rdb\" is closed\n";
-
-    if (reg_closeRegistry(hReg3))
-        cout << "\t47.a). closing registry \"test4.rdb\" failed\n";
-    else
-        cout << "47.a). registry \"test4.rdb\" is closed\n";
-
-    return 0;
-}
-
-
-/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
diff --git a/registry/workben/test.cxx b/registry/workben/test.cxx
deleted file mode 100644
index 96f552b08ed0..000000000000
--- a/registry/workben/test.cxx
+++ /dev/null
@@ -1,45 +0,0 @@
-/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
-/*
- * This file is part of the LibreOffice project.
- *
- * This Source Code Form is subject to the terms of the Mozilla Public
- * License, v. 2.0. If a copy of the MPL was not distributed with this
- * file, You can obtain one at http://mozilla.org/MPL/2.0/.
- *
- * This file incorporates work covered by the following license notice:
- *
- *   Licensed to the Apache Software Foundation (ASF) under one or more
- *   contributor license agreements. See the NOTICE file distributed
- *   with this work for additional information regarding copyright
- *   ownership. The ASF licenses this file to you under the Apache
- *   License, Version 2.0 (the "License"); you may not use this file
- *   except in compliance with the License. You may obtain a copy of
- *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
- */
-
-
-#include <stdio.h>
-
-#if (defined UNX)
-int main()
-#else
-int _cdecl main()
-#endif
-{
-    void test_coreReflection();
-    void test_registry_CppApi();
-    void test_generateMerge1();
-    void test_generateMerge2();
-    void test_merge();
-
-    test_coreReflection();
-    test_registry_CppApi();
-    test_generateMerge1();
-    test_generateMerge2();
-    test_merge();
-
-    return 0;
-}
-
-
-/* vim:set shiftwidth=4 softtabstop=4 expandtab: */