this script talks about dmake. it must be out of its mind!

Change-Id: Ic1863a2126c26cf703afc5fe250dea2bbddfef7d

1 files changed, 0 insertions, 488 deletions

diff --git a/sal/qa/buildall.pl b/sal/qa/buildall.pl
deleted file mode 100644
index 20f4dfa4aa04..000000000000
--- a/sal/qa/buildall.pl
+++ /dev/null
@@ -1,488 +0,0 @@
-eval 'exec perl -wS $0 ${1+"$@"}'
-    if 0;
-#
-# This file is part of the LibreOffice project.
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-#
-# This file incorporates work covered by the following license notice:
-#
-#   Licensed to the Apache Software Foundation (ASF) under one or more
-#   contributor license agreements. See the NOTICE file distributed
-#   with this work for additional information regarding copyright
-#   ownership. The ASF licenses this file to you under the Apache
-#   License, Version 2.0 (the "License"); you may not use this file
-#   except in compliance with the License. You may obtain a copy of
-#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
-#
-
-# #!/usr/bin/perl -w
-
-use strict;
-use POSIX;
-use Cwd;
-use File::Path;
-use English;
-use Cwd 'chdir';
-
-my $cwd = getcwd();
-
-# Prototypes
-sub initEnvironment();
-sub main($);
-sub checkForKillobj();
-sub checkARGVFor($);
-
-my $g_sTempDir = "";
-my $FS = "";
-
-my $nGlobalFailures = 0;
-
-my %libraryRunThrough;
-my $bBuildAll = 0;
-
-# LLA: this does not exist, ... use a little bit simpler method.
-# use File::Temp qw/ :POSIX /;
-
-my $params;
-my $param;
-
-if ($#ARGV < 0)
-{
-    $params = "test "; # debug=t TESTOPTADD=\"-boom\"   TESTOPTADD=\"-noerroronexit\"
-
-    # my $nNumber = 55;
-    # my $sLocalParams = $params;
-    # $sLocalParams =~ s/test\s/test$nNumber /;
-    # print "Testparams: $sLocalParams\n";
-    # exit 1;
-    print "Default ";
-}
-else
-{
-    # special hack!
-    if (checkForKillobj() == 1)
-    {
-        $params = "killobj";
-    }
-    elsif (checkARGVFor("buildall") == 1)
-    {
-        $bBuildAll = 1;
-        $params = "test";
-    }
-    else
-    {
-        # always run test, but envelope the other in 'TESTOPT="..."'
-        $params = "test TESTOPT=\"";
-
-        foreach $param (@ARGV)
-        {
-            $params = $params . " " . $param;
-        }
-        $params = $params . "\"";
-    }
-    print "User defined ";
-}
-
-print "parameters for dmake: $params\n";
-
-initEnvironment();
-main($params);
-
-# ------------------------------------------------------------------------------
-sub checkARGVFor($)
-{
-    my $sCheckValue = shift;
-    my $sLocalParam;
-    my $nBackValue = 0;
-    foreach $sLocalParam (@ARGV)
-    {
-        if ($sLocalParam =~ /^${sCheckValue}$/)
-        {
-            $nBackValue = 1;
-            last;
-        }
-    }
-    return $nBackValue;
-}
-# ------------------------------------------------------------------------------
-sub checkForKillobj()
-{
-    my $sLocalParam;
-    my $nBackValue = 0;
-    foreach $sLocalParam (@ARGV)
-    {
-        if ($sLocalParam =~ /^killobj$/)
-        {
-            $nBackValue = 1;
-            last;
-        }
-    }
-    return $nBackValue;
-}
-
-# ------------------------------------------------------------------------------
-sub initEnvironment()
-{
-    my $os = $ENV{OS};
-    # no error output in forms of message boxes
-    $ENV{'DISABLE_SAL_DBGBOX'}="t";
-
-  SWITCH: {
-      if ( $os eq "WNT" ) {
-          $FS             = "\\";
-          $g_sTempDir         = $ENV{TMP}  ? "$ENV{TMP}${FS}" : "c:${FS}tmp${FS}";
-          last SWITCH;
-      }
-      else {
-          $FS             = "/";
-          $g_sTempDir         = $ENV{TMP}  ? "$ENV{TMP}${FS}" : "${FS}tmp${FS}";
-          last SWITCH;
-      }
-      print STDERR "buildall.pl: unknown platform\n";
-      exit(1);
-  }
-}
-# ------------------------------------------------------------------------------
-
-sub trim($)
-{
-    my $oldstr = shift;
-    $oldstr =~ s/^\s*(.*?)\s*$/$1/;
-    return $oldstr;
-}
-
-# ------------------------------------------------------------------------------
-sub getLibName($)
-{
-    my $sFile = shift;
-    if ($OSNAME eq "linux" || $OSNAME eq "solaris")
-    {
-        return "lib" . $sFile . ".so";
-    }
-    if ($OSNAME eq "MSWin32")
-    {
-        return $sFile . ".dll";
-    }
-    return $sFile;
-}
-# ------------------------------------------------------------------------------
-sub giveOutAll($)
-{
-    my $sFailureFile = shift;
-    local *IN;
-    if (! open(IN, $sFailureFile))
-    {
-        print "ERROR: Can't open output file $sFailureFile\n";
-        return;
-    }
-    my $line;
-    while ($line = <IN>)
-    {
-        chomp($line);
-        print "$line\n";
-    }
-    close(IN);
-}
-# ------------------------------------------------------------------------------
-sub giveOutFailures($$)
-{
-    my $sTest = shift;
-    my $sFailureFile = shift;
-
-    my $bBegin = 0;
-    my $nFailures = 0;
-
-    my $line;
-    local *IN;
-    if (! open(IN, $sFailureFile))
-    {
-        print "ERROR: Can't open output file $sFailureFile\n";
-        return;
-    }
-
-    my $bStartUnitTest = 0;
-    while ($line = <IN>)
-    {
-        chomp($line);
-        if ( $line =~ /^- start unit test/)
-        {
-            $bStartUnitTest = 1;
-        }
-    }
-    close(IN);
-
-    if ($bStartUnitTest == 0)
-    {
-        print "\nFailure: Unit test not started. Maybe compiler error.\n";
-        giveOutAll($sFailureFile);
-        $nFailures++;
-        # exit(1);
-    }
-    else
-    {
-        open(IN, $sFailureFile);
-        # check if testshl2 was started
-        while ($line = <IN>)
-        {
-            chomp($line);
-
-            # handling of the states
-            if ( $line =~ /^\# -- BEGIN:/)
-            {
-                $bBegin = 1;
-            }
-            elsif ( $line =~ /^\# -- END:/)
-            {
-                $bBegin = 0;
-            }
-            else
-            {
-                if ($bBegin == 1)
-                {
-                    print "$line\n";
-                    $nFailures++;
-                }
-            }
-        }
-        close(IN);
-    }
-
-    if ($nFailures > 0)
-    {
-        # extra return for a better output
-        print "\nFailures occurred: $nFailures\n";
-        print "The whole output can be found in $sFailureFile\n";
-        print "\n";
-
-        # Statistics
-        $nGlobalFailures += $nFailures;
-    }
-}
-# ------------------------------------------------------------------------------
-sub printOnLibrary($)
-{
-    my $sTarget = shift;
-    print "       on library: " . getLibName($sTarget);
-}
-# ------------------------------------------------------------------------------
-sub runASingleTest($$)
-{
-    my $sTarget = shift;
-    my $params = shift;
-    my $dmake = "dmake $params";
-
-    my $sLogPath = $g_sTempDir . "dmake_out_$$";
-    mkdir($sLogPath);
-    my $sLogFile = $sLogPath . "/" . $sTarget . ".out";
-
-    # due to the fact, a library name in one project is distinct, we should remember all already run through libraries and
-    # supress same libraries, if they occur one more.
-
-    if (exists $libraryRunThrough{getLibName($sTarget)})
-    {
-        # already done
-        return;
-    }
-    printOnLibrary($sTarget);
-    print "\n";
-
-# redirect tcsh ">&" (stdout, stderr)
-# redirect 4nt   ">" (stdout), "2>" (stderr)
-# print "OSNAME: $OSNAME\n";
-# LLA: redirect check canceled, seems to be not work as I want.
-#     my $redirect = "";
-#     if ($OSNAME eq "linux" || $OSNAME eq "solaris")
-#     {
-#         # print "UNIX, linux or solaris\n";
-#         $redirect = '>>&!' . $sLogFile;
-#     }
-#     else
-#     {
-#         if ($OSNAME eq "MSWin32")
-#         {
-#             # test
-#             $redirect = ">>$sLogFile 2>>$sLogFile";
-#         }
-#     }
-#     print "$dmake $redirect\n";
-
-# LLA: so system does also not work as I imagine
-#    system("$dmake $redirect");
-
-# LLA: next check, use open with pipe
-
-    local *LOGFILE;
-    if (! open( LOGFILE, '>' . "$sLogFile"))
-    {
-        print "ERROR: can't open logfile: $sLogFile\n";
-        return;
-    }
-
-    my $line;
-    local *DMAKEOUTPUT;
-    if (! open( DMAKEOUTPUT, "$dmake 2>&1 |"))
-    {
-        print "ERROR: can't open dmake\n";
-        return;
-    }
-    while ($line = <DMAKEOUTPUT>)
-    {
-        chomp($line);
-        print LOGFILE "$line\n";
-    }
-    close(DMAKEOUTPUT);
-    close(LOGFILE);
-
-    giveOutFailures($sTarget, $sLogFile);
-
-    $libraryRunThrough{getLibName($sTarget)} = "done";
-}
-
-# ------------------------------------------------------------------------------
-sub interpretLine($)
-{
-    my $line = shift;
-
-    my $path;
-    my $file;
-
-    if ($line =~ /^\#/ || $line =~ /^$/)
-    {
-        # remark or empty line
-    }
-    else
-    {
-        # special format, $file == $path
-        ($path, $file) = split(/;/, $line);
-        if (! $file)
-        {
-            $file = $path;
-        }
-        $file = trim($file);
-        $path = trim($path);
-    }
-    return $path, $file;
-}
-# ------------------------------------------------------------------------------
-sub runTestsOnPath($$$)
-{
-    my $path = shift;
-    my $file = shift;
-    my $params = shift;
-
-    # empty values
-    if (!$path || $path eq "")
-    {
-        # DBG: print "empty path '$path'\n";
-        return;
-    }
-    if (!$file || $file eq "")
-    {
-        # DBG: print "empty file '$file'\n";
-        return;
-    }
-
-#   print "File: '$file', Path: '$path'\n";
-    print "Work in directory: $path\n";
-    my $newpath = $cwd . $FS . $path;
-#   print "chdir to $newpath\n";
-
-    my $error = chdir($newpath);
-    cwd();
-
-    # run through the hole makefile.mk and check if SHL<D>TARGET = ... exist, for every target call "dmake test<D>"
-
-    local *MAKEFILE_MK;
-    if (! open(MAKEFILE_MK, "makefile.mk"))
-    {
-        print "ERROR: can't open makefile.mk in path: $newpath\n";
-        print "please check your libs2test.txt file in qa directory.\n";
-    }
-    my $line;
-    my $nNumber;
-    my $sTarget;
-    my $sLocalParams;
-
-    while($line = <MAKEFILE_MK>)
-    {
-        chomp($line);
-
-        if ($line =~ /SHL(\d)TARGET=(.*)/)
-        {
-            $nNumber = $1;
-            $sTarget = trim($2);
-
-            # DBG: print "test$number is lib: $target\n";
-            $sLocalParams = $params . " ";                  # append a whitespace, so we can check if 'test' exist without additional digits
-            $sLocalParams =~ s/test\s/test$nNumber/;
-            # DBG: print "$sLocalParams\n";
-            if ($bBuildAll == 1 ||
-                $file eq $sTarget)
-            {
-                # print "runASingleTest on Target: $sTarget 'dmake $sLocalParams'\n";
-                runASingleTest($sTarget, $sLocalParams);
-            }
-            else
-            {
-                # printOnLibrary($sTarget);
-                # print " suppressed, not in libs2test.txt\n";
-            }
-        }
-    }
-    close(MAKEFILE_MK);
-}
-
-# ------------------------------------------------------------------------------
-
-sub main($)
-{
-    my $params = shift;
-#    my $sLogFile = shift;     # "buildall_$$.out";
-    local *LIBS2TEST;
-    my $filename = "libs2test.txt";
-    my $line;
-
-    open(LIBS2TEST, $filename) || die "can't open $filename\n";
-
-    while($line = <LIBS2TEST>)
-    {
-        chomp($line);
-        # DOS Hack grrrr...
-        while ($line =~ /
-$/)
-        {
-            $line = substr($line, 0, -1);
-        }
-
-        # print "$line\n";
-        my $path;
-        my $file;
-        ($path, $file) = interpretLine($line);
-        runTestsOnPath($path, $file, $params);
-    }
-    close(LIBS2TEST);
-
-    print "\nComplete logging information will be found in dir: ".$g_sTempDir."dmake_out_$$/\n";
-
-    if ($nGlobalFailures > 0)
-    {
-        print "\nFailures over all occurred: $nGlobalFailures\n";
-        print "\nPASSED FAILED.\n";
-    }
-    else
-    {
-        print "\nPASSED OK.\n";
-    }
-}
-
-# ------------------------------------------------------------------------------
-
-# TODO:
-# -verbose
-# -fan   - \ | /
-
-# END!
-