final solution of the ARCHIVE question

Change-Id: I70da65e08c75cd732000597a09ed113b3075c5a8

2 files changed, 0 insertions, 478 deletions

diff --git a/solenv/bin/modules/installer.pm b/solenv/bin/modules/installer.pm
index 605aec25e663..485a508ccccf 100644
--- a/solenv/bin/modules/installer.pm
+++ b/solenv/bin/modules/installer.pm
@@ -24,7 +24,6 @@ use Cwd;
 use Data::Dumper;
 use File::Copy;
 use List::Util qw(shuffle);
-use installer::archivefiles;
 use installer::control;
 use installer::converter;
 use installer::copyproject;
@@ -605,16 +604,6 @@ sub run {
         installer::scriptitems::make_filename_language_specific($filesinproductlanguageresolvedarrayref);
 
         ######################################################################################
-        # Unzipping files with flag ARCHIVE and putting all included files into the file list
-        ######################################################################################
-
-        installer::logger::print_message( "... analyzing files with flag ARCHIVE ...\n" );
-
-        my @additional_paths_from_zipfiles = ();
-
-        $filesinproductlanguageresolvedarrayref = installer::archivefiles::resolving_archive_flag($filesinproductlanguageresolvedarrayref, \@additional_paths_from_zipfiles, $languagestringref, $loggingdir);
-
-        ######################################################################################
         # Processing files with flag FILELIST and putting listed files into the file list
         ######################################################################################
 
diff --git a/solenv/bin/modules/installer/archivefiles.pm b/solenv/bin/modules/installer/archivefiles.pm
deleted file mode 100644
index 17a6a5f4077f..000000000000
--- a/solenv/bin/modules/installer/archivefiles.pm
+++ /dev/null
@@ -1,467 +0,0 @@
-#
-# This file is part of the LibreOffice project.
-#
-# This Source Code Form is subject to the terms of the Mozilla Public
-# License, v. 2.0. If a copy of the MPL was not distributed with this
-# file, You can obtain one at http://mozilla.org/MPL/2.0/.
-#
-# This file incorporates work covered by the following license notice:
-#
-#   Licensed to the Apache Software Foundation (ASF) under one or more
-#   contributor license agreements. See the NOTICE file distributed
-#   with this work for additional information regarding copyright
-#   ownership. The ASF licenses this file to you under the Apache
-#   License, Version 2.0 (the "License"); you may not use this file
-#   except in compliance with the License. You may obtain a copy of
-#   the License at http://www.apache.org/licenses/LICENSE-2.0 .
-#
-
-package installer::archivefiles;
-
-use Archive::Zip qw( :ERROR_CODES :CONSTANTS );
-use installer::files;
-use installer::globals;
-use installer::logger;
-use installer::pathanalyzer;
-use installer::systemactions;
-use Cwd;
-
-#################################################################
-# Changing the name for files with flag RENAME_TO_LANGUAGE
-#################################################################
-
-sub put_language_into_name
-{
-    my ( $oldname, $onelanguage ) = @_;
-
-    my $newname = "";
-
-    my $filename = "";
-    my $extension = "";
-
-    if ( $oldname =~ /en-US/ )  # files, that contain the language in the file name
-    {
-        $newname = $oldname;
-        $newname =~ s/en-US/$onelanguage/;
-    }
-    else    # files, that do not contain the language in the file name
-    {
-        if ( $oldname =~ /^\s*(.*)(\..*?)\s*$/ )    # files with extension
-        {
-            $filename = $1;
-            $extension = $2;
-        }
-        else
-        {
-            $filename = $oldname;
-            $extension = "";
-        }
-
-        $newname = $1 . "_" . $onelanguage . $2;
-    }
-
-    return $newname;
-}
-
-#################################################################
-# Converting patchfiles string into array
-#################################################################
-
-sub get_patch_file_list
-{
-    my ( $patchfilestring ) = @_;
-
-    $patchfilestring =~ s/^\s*\(?//;
-    $patchfilestring =~ s/\)?\s*$//;
-    $patchfilestring =~ s/^\s*\///;
-    $patchfilestring =~ s/^\s*\\//;
-
-    my @patchfilesarray = split /,\s*/, $patchfilestring;
-
-    return \@patchfilesarray;
-}
-
-#################################################################
-# Reading all executables in the "manifest.xml"
-#################################################################
-
-sub get_all_executables_from_manifest
-{
-    my ($unzipdir, $manifestfile, $executable_files_in_extensions) = @_;
-
-    my $is_executable = 0;
-
-    for ( my $i = 0; $i <= $#{$manifestfile}; $i++ )
-    {
-        my $line = ${$manifestfile}[$i];
-
-        if ( $line =~ /\"application\/vnd\.sun\.star\.executable\"/ ) { $is_executable = 1; }
-
-        if (( $line =~ /manifest\:full\-path=\"(.*?)\"/ ) && ( $is_executable ))
-        {
-            my $filename = $unzipdir . $installer::globals::separator . $1;
-            # making only slashes for comparison reasons
-            $filename =~ s/\\/\//g;
-            $executable_files_in_extensions->{$filename} = 1;
-        }
-
-        if ( $line =~ /\/\>/ ) { $is_executable = 0; }
-    }
-}
-
-#################################################################
-# Reading the "manifest.xml" in extensions and determine, if
-# there are executable files
-#################################################################
-
-sub collect_all_executable_files_in_extensions
-{
-    my ($unzipdir, $executable_files_in_extensions) = @_;
-
-    $unzipdir =~ s/\Q$installer::globals::separator\E\s*$//;
-
-    my $manifestfilename = $unzipdir . $installer::globals::separator . "META-INF" . $installer::globals::separator . "manifest.xml";
-
-    if ( -f $manifestfilename )
-    {
-        my $manifestfile = installer::files::read_file($manifestfilename);
-        get_all_executables_from_manifest($unzipdir, $manifestfile, $executable_files_in_extensions);
-    }
-}
-
-#################################################################
-# Analyzing files with flag ARCHIVE
-#################################################################
-
-sub resolving_archive_flag
-{
-    my ($filesarrayref, $additionalpathsref, $languagestringref, $loggingdir) = @_;
-
-    my @newallfilesarray = ();
-
-    my ($systemcall, $returnvalue, $infoline);
-
-    my $platformunzipdirbase = installer::systemactions::create_directories("zip", $languagestringref);
-    push(@installer::globals::removedirs, $platformunzipdirbase);
-
-    installer::logger::include_header_into_logfile("Files with flag ARCHIVE:");
-
-    my $repeat_unzip = 0;
-    my $maxcounter = 0;
-
-    for ( my $i = 0; $i <= $#{$filesarrayref}; $i++ )
-    {
-        if ( $repeat_unzip ) { $i--; }  # decreasing the counter
-
-        my $onefile = ${$filesarrayref}[$i];
-        my $styles = "";
-
-        if ( $onefile->{'Styles'} ) { $styles = $onefile->{'Styles'}; }
-
-        if ( $styles =~ /\bARCHIVE\b/ )     # copying, unzipping and changing the file list
-        {
-            my $sourcepath = $onefile->{'sourcepath'};
-
-            my $use_internal_rights = 0;
-            if ( $styles =~ /\bUSE_INTERNAL_RIGHTS\b/ ) { $use_internal_rights = 1; }   # using the rights used inside the zip file
-
-            my $rename_to_language = 0;
-            if ( $styles =~ /\bRENAME_TO_LANGUAGE\b/ ) { $rename_to_language = 1; } # special handling for renamed files (scriptitems.pm)
-
-            my %executable_files_in_extensions = ();
-            my $set_executable_privileges = 0;  # setting privileges for exectables is required for oxt files
-            if ( $onefile->{'Name'} =~ /\.oxt\s*$/ ) { $set_executable_privileges = 1; }
-
-            # mechanism to select files from an archive files
-            my $select_files = 0;
-            my $selectlistfiles = "";
-            my @keptfiles = ();
-            if ( $onefile->{'Selectfiles'} )
-            {
-                $select_files = 1;
-                $selectlistfiles = get_patch_file_list( $onefile->{'Selectfiles'} );
-                $infoline = "Selected file list defined at file: $onefile->{'Name'} :\n";
-                push( @installer::globals::logfileinfo, $infoline);
-                for ( my $k = 0; $k <= $#{$selectlistfiles}; $k++ )
-                {
-                    $infoline = "\"${$selectlistfiles}[$k]\"\n";
-                    push( @installer::globals::logfileinfo, $infoline);
-                }
-            }
-
-            if ( $onefile->{'Selectfiles'} ) { $onefile->{'Selectfiles'} = ""; } # Selected files list no longer required
-
-            # creating directories
-
-            my $onelanguage = $onefile->{'specificlanguage'};
-
-            # files without language into directory "00"
-
-            if ($onelanguage eq "") { $onelanguage = "00"; }
-
-            my $unzipdir;
-
-            $unzipdir = $platformunzipdirbase . $installer::globals::separator . $onelanguage . $installer::globals::separator;
-
-            installer::systemactions::create_directory($unzipdir);  # creating language specific subdirectories
-
-            my $onefilename = $onefile->{'Name'};
-            $onefilename =~ s/\./\_/g;      # creating new directory name
-            $onefilename =~ s/\//\_/g;      # only because of /letter/fontunxpsprint.zip, the only zip file with path
-            $unzipdir = $unzipdir . $onefilename . $installer::globals::separator;
-
-            if ( $installer::globals::dounzip ) { installer::systemactions::create_directory($unzipdir); }  # creating subdirectories with the names of the zipfiles
-
-            my $zip = Archive::Zip->new();
-            if ( $zip->read($sourcepath) != AZ_OK )
-            {
-                $infoline = "ERROR: Could not unzip $sourcepath\n";
-                push( @installer::globals::logfileinfo, $infoline);
-            }
-
-            my $counter = 0;
-            my $contains_dll = 0;
-            my @dllList = ();
-            my @dirs = ();
-            foreach my $member ( $zip->memberNames() )
-            {
-                $counter++;
-                if ( $member =~ /.dll\s*$/i ) { $contains_dll = 1; push(@dllList, $member); }
-                if ( $member =~ m/\/$/ ) { push(@dirs, $member); }
-            }
-
-            if (! ( $counter > 0 )) # the zipfile is empty
-            {
-                $infoline = "ERROR: Could not unzip $sourcepath\n";
-                push( @installer::globals::logfileinfo, $infoline);
-
-            }
-            else
-            {
-                if ( $installer::globals::dounzip )         # really unpacking the files
-                {
-                    if ( $zip->extractTree("", $unzipdir) != AZ_OK ) { die "Could not unzip: $!"; }
-
-                    if (( $^O =~ /cygwin/i ) && ( $contains_dll ))
-                    {
-                        my $dir = getcwd();
-                        chdir($unzipdir);
-                        my $changed = chmod(0775, @dllList);
-                        $infoline = "Changed mode of $changed files (of ".scalar(@dllList).")\n";
-                        push( @installer::globals::logfileinfo, $infoline);
-                        chdir($dir);
-
-                        if ($changed != scalar(@dllList))
-                        {
-                            $infoline = "ERROR: Could not chmod all files!\n";
-                            push( @installer::globals::logfileinfo, $infoline);
-                        }
-                    }
-
-                    if ( ! $installer::globals::iswindowsbuild && scalar(@dirs) > 0 )
-                    {
-                        my $dir = getcwd();
-                        chdir($unzipdir);
-                        # Setting unix rights to "775" for all created directories inside the package
-                        my $changed = chmod(0775, @dirs);
-                        $infoline = "Changed mode of : $changed; should be: ".scalar(@dirs)."\n";
-                        chdir($dir);
-
-                        push( @installer::globals::logfileinfo, $infoline);
-
-                        if ($changed != scalar(@dirs))
-                        {
-                            $infoline = "ERROR: Could not chmod all files!\n";
-                            push( @installer::globals::logfileinfo, $infoline);
-                        }
-                    }
-
-                    # Selecting names of executable files in extensions
-                    if ( $set_executable_privileges )
-                    {
-                        collect_all_executable_files_in_extensions($unzipdir, \%executable_files_in_extensions);
-                    }
-                }
-
-                my $unziperror = 0;
-
-                foreach my $zipname ( $zip->memberNames() )
-                {
-                    # Format from Archive:::Zip :
-                    # dir1/
-                    # dir1/so7drawing.desktop
-
-                    # some directories and files (from the help) start with "./simpress.idx"
-
-                    $zipname =~ s/^\s*\.\///;
-
-                    if ($installer::globals::iswin and $^O =~ /MSWin/i) { $zipname =~ s/\//\\/g; }
-
-                    if ( $zipname =~ /\Q$installer::globals::separator\E\s*$/ ) # slash or backslash at the end characterizes a directory
-                    {
-                        $zipname = $zipname . "\n";
-                        push(@{$additionalpathsref}, $zipname);
-
-                        # Also needed here:
-                        # Name
-                        # Language
-                        # ismultilingual
-                        # Basedirectory
-
-                        # This is not needed, because the list of all directories for the
-                        # epm list file is generated from the destination directories of the
-                        # files included in the product!
-                    }
-                    else
-                    {
-                        my %newfile = ();
-                        %newfile = %{$onefile};
-                        $newfile{'Name'} = $zipname;
-                        my $destination = $onefile->{'destination'};
-                        installer::pathanalyzer::get_path_from_fullqualifiedname(\$destination);
-                        $newfile{'destination'} = $destination . $zipname;
-                        $newfile{'sourcepath'} = $unzipdir . $zipname;
-                        $newfile{'zipfilename'} = $onefile->{'Name'};
-                        $newfile{'zipfilesource'} = $onefile->{'sourcepath'};
-                        $newfile{'zipfiledestination'} = $onefile->{'destination'};
-
-                        if (( $use_internal_rights ) && ( ! $installer::globals::iswin ))
-                        {
-                            $newfile{'UnixRights'} = sprintf("%o", ($zip->memberNamed($zipname)->unixFileAttributes() & 07777));
-                            $infoline = "Setting unix rights for \"$newfile{'sourcepath'}\" to \"$newfile{'UnixRights'}\"\n";
-                            push( @installer::globals::logfileinfo, $infoline);
-                        }
-
-                        if ( $set_executable_privileges )
-                        {
-                            # All paths to executables are saved in the hash %executable_files_in_extensions
-                            my $compare_path = $newfile{'sourcepath'};
-                            $compare_path =~ s/\\/\//g;  # contains only slashes for comparison reasons
-                            if ( exists($executable_files_in_extensions{$compare_path}) )
-                            {
-                                $newfile{'UnixRights'} = "775";
-                                $infoline = "Executable in Extension: Setting unix rights for \"$newfile{'sourcepath'}\" to \"$newfile{'UnixRights'}\"\n";
-                                push( @installer::globals::logfileinfo, $infoline);
-                            }
-                        }
-
-                        if ( $select_files )
-                        {
-                            if ( ! grep {$_ eq $zipname} @{$selectlistfiles} )
-                            {
-                                $infoline = "Removing from ARCHIVE file $onefilename: $zipname\n";
-                                push( @installer::globals::logfileinfo, $infoline);
-                                next; # ignoring files, that are not included in $selectlistfiles
-                            }
-                            else
-                            {
-                                $infoline = "Keeping from ARCHIVE file $onefilename: $zipname\n";
-                                push( @installer::globals::logfileinfo, $infoline);
-                                push( @keptfiles, $zipname); # collecting all kept files
-                            }
-                        }
-
-                        if ( $rename_to_language )
-                        {
-                            my $newzipname = put_language_into_name($zipname, $onelanguage);
-                            my $oldfilename = $unzipdir . $zipname;
-                            my $newfilename = $unzipdir . $newzipname;
-
-                            installer::systemactions::copy_one_file($oldfilename, $newfilename);
-
-                            $newfile{'Name'} = $newzipname;
-                            $newfile{'destination'} = $destination . $newzipname;
-                            $newfile{'sourcepath'} = $unzipdir . $newzipname;
-
-                            $infoline = "RENAME_TO_LANGUAGE: Using $newzipname instead of $zipname!\n";
-                            push( @installer::globals::logfileinfo, $infoline);
-                        }
-
-                        my $sourcefiletest = $unzipdir . $zipname;
-                        if ( ! -f $sourcefiletest )
-                        {
-                            $infoline = "ATTENTION: Unzip failed for $sourcefiletest!\n";
-                            push( @installer::globals::logfileinfo, $infoline);
-                            $unziperror = 1;
-                        }
-
-                        # only adding the new line into the files array, if not in repeat modus
-
-                        if ( ! $repeat_unzip ) { push(@newallfilesarray, \%newfile); }
-                    }
-                }
-
-                # Comparing the content of @keptfiles and $selectlistfiles
-                # Do all files from the list of selected files are stored in @keptfiles ?
-                # @keptfiles contains only files included in $selectlistfiles. But are all
-                # files from $selectlistfiles included in @keptfiles?
-
-                if ( $select_files )
-                {
-                    my $number = $#{$selectlistfiles} + 1;
-                    $infoline = "SELECTLIST: Number of files in file selection list: $number\n";
-                    push( @installer::globals::logfileinfo, $infoline);
-                    $number = $#keptfiles + 1;
-                    $infoline = "SELECTLIST: Number of kept files: $number\n";
-                    push( @installer::globals::logfileinfo, $infoline);
-
-                    for ( my $k = 0; $k <= $#keptfiles; $k++ )
-                    {
-                        $infoline = "KEPT FILES: $keptfiles[$k]\n";
-                        push( @installer::globals::logfileinfo, $infoline);
-                    }
-
-                    my @warningfiles = ();
-
-                    for ( my $k = 0; $k <= $#{$selectlistfiles}; $k++ )
-                    {
-                        if ( ! grep {$_ eq ${$selectlistfiles}[$k]} @keptfiles )
-                        {
-                            push(@warningfiles, ${$selectlistfiles}[$k]);
-                        }
-                    }
-
-                    for ( my $k = 0; $k <= $#warningfiles; $k++ )
-                    {
-                        $infoline = "WARNING: $warningfiles[$k] not included in install set (does not exist in zip file)!\n";
-                        push( @installer::globals::logfileinfo, $infoline);
-                    }
-
-                }
-
-                if ( $unziperror )
-                {
-                    installer::logger::print_warning( "Repeating to unpack $sourcepath! \n" );
-                    $infoline = "ATTENTION: Repeating to unpack $sourcepath !\n";
-                    push( @installer::globals::logfileinfo, $infoline);
-                    $repeat_unzip = 1;
-                    $maxcounter++;
-
-                    if ( $maxcounter == 5 ) # exiting the program
-                    {
-                        die "Failed to unzip $sourcepath !";
-                    }
-                }
-                else
-                {
-                    $infoline = "Info: $sourcepath unpacked without problems !\n";
-                    push( @installer::globals::logfileinfo, $infoline);
-                    $repeat_unzip = 0;
-                    $maxcounter = 0;
-                }
-            }
-        }
-        else        # nothing to do here, no zipped file (no ARCHIVE flag)
-        {
-            push(@newallfilesarray, $onefile);
-        }
-    }
-
-    $infoline = "\n";
-    push( @installer::globals::logfileinfo, $infoline);
-
-    return \@newallfilesarray;
-}
-
-
-1;