NdTopLeft is unused now.

Change-Id: I39184b8fdf666676c21560d39911f6204b0afd52
Reviewed-on: https://gerrit.libreoffice.org/41257
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tamás Zolnai <tamas.zolnai@collabora.com>

4 files changed, 21 insertions, 22 deletions

diff --git a/sw/source/filter/ww8/docxattributeoutput.cxx b/sw/source/filter/ww8/docxattributeoutput.cxx
index 3c8bddef0cbf..87fefdc7783b 100644
--- a/sw/source/filter/ww8/docxattributeoutput.cxx
+++ b/sw/source/filter/ww8/docxattributeoutput.cxx
@@ -4790,13 +4790,13 @@ void DocxAttributeOutput::WritePostponedActiveXControl()
     for( std::vector<PostponedDrawing>::const_iterator it = m_aPostponedActiveXControls.begin();
          it != m_aPostponedActiveXControls.end(); ++it )
     {
-        WriteActiveXControl(it->object, *(it->frame), *(it->point));
+        WriteActiveXControl(it->object, *(it->frame));
     }
     m_aPostponedActiveXControls.clear();
 }
 
 
-void DocxAttributeOutput::WriteActiveXControl(const SdrObject* pObject, const SwFrameFormat& rFrameFormat,const Point& rNdTopLeft)
+void DocxAttributeOutput::WriteActiveXControl(const SdrObject* pObject, const SwFrameFormat& rFrameFormat)
 {
     SdrUnoObj *pFormObj = const_cast<SdrUnoObj*>(dynamic_cast< const SdrUnoObj*>(pObject));
     if (!pFormObj)
@@ -4833,7 +4833,7 @@ void DocxAttributeOutput::WriteActiveXControl(const SdrObject* pObject, const Sw
         sShapeId = m_rExport.VMLExporter().AddSdrObject(*pObject,
             rHoriOri.GetHoriOrient(), rVertOri.GetVertOrient(),
             rHoriOri.GetRelationOrient(),
-            rVertOri.GetRelationOrient(), &rNdTopLeft, true);
+            rVertOri.GetRelationOrient(), true);
     }
 
     // control
@@ -5013,7 +5013,7 @@ void DocxAttributeOutput::WritePostponedCustomShape()
         if ( IsAlternateContentChoiceOpen() )
             m_rExport.SdrExporter().writeDMLDrawing(it->object, (it->frame), m_anchorId++);
         else
-            m_rExport.SdrExporter().writeDMLAndVMLDrawing(it->object, *(it->frame), *(it->point), m_anchorId++);
+            m_rExport.SdrExporter().writeDMLAndVMLDrawing(it->object, *(it->frame), m_anchorId++);
     }
     m_bStartedParaSdt = bStartedParaSdt;
     m_pPostponedCustomShape.reset(nullptr);
@@ -5037,14 +5037,14 @@ void DocxAttributeOutput::WritePostponedDMLDrawing()
         if ( IsAlternateContentChoiceOpen() && !( m_rExport.SdrExporter().IsDrawingOpen()) )
            m_rExport.SdrExporter().writeDMLDrawing(it->object, (it->frame), m_anchorId++);
         else
-            m_rExport.SdrExporter().writeDMLAndVMLDrawing(it->object, *(it->frame), *(it->point), m_anchorId++);
+            m_rExport.SdrExporter().writeDMLAndVMLDrawing(it->object, *(it->frame), m_anchorId++);
     }
     m_bStartedParaSdt = bStartedParaSdt;
 
     m_pPostponedOLEs = std::move(pPostponedOLEs);
 }
 
-void DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame &rFrame, const Point& rNdTopLeft )
+void DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame &rFrame, const Point& /*rNdTopLeft*/ )
 {
     m_pSerializer->mark(Tag_OutputFlyFrame);
 
@@ -5097,12 +5097,12 @@ void DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame &rFrame, const P
                             {
                                 // Do not write w:drawing inside w:drawing. Instead Postpone the Inner Drawing.
                                 if( m_rExport.SdrExporter().IsDrawingOpen() )
-                                    m_pPostponedCustomShape->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat()), &rNdTopLeft));
+                                    m_pPostponedCustomShape->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat())));
                                 else
                                     m_rExport.SdrExporter().writeDMLDrawing( pSdrObj, &rFrame.GetFrameFormat(), m_anchorId++);
                             }
                             else
-                                m_rExport.SdrExporter().writeDMLAndVMLDrawing( pSdrObj, rFrame.GetFrameFormat(), rNdTopLeft, m_anchorId++);
+                                m_rExport.SdrExporter().writeDMLAndVMLDrawing( pSdrObj, rFrame.GetFrameFormat(), m_anchorId++);
                             m_bStartedParaSdt = bStartedParaSdt;
 
                             m_bPostponedProcessingFly = false ;
@@ -5110,12 +5110,12 @@ void DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame &rFrame, const P
                         // IsAlternateContentChoiceOpen(): check is to ensure that only one object is getting added. Without this check, plus one object gets added
                         // m_bParagraphFrameOpen: check if the frame is open.
                         else if (IsAlternateContentChoiceOpen() && m_bParagraphFrameOpen)
-                            m_pPostponedCustomShape->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat()), &rNdTopLeft));
+                            m_pPostponedCustomShape->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat())));
                         else
                         {
                             // we are writing out attributes, but w:drawing should not be inside w:rPr, so write it out later
                             m_bPostponedProcessingFly = true ;
-                            m_pPostponedDMLDrawings->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat()), &rNdTopLeft));
+                            m_pPostponedDMLDrawings->push_back(PostponedDrawing(pSdrObj, &(rFrame.GetFrameFormat())));
                         }
                     }
                 }
@@ -5166,14 +5166,14 @@ void DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame &rFrame, const P
             {
                 const SdrObject* pObject = rFrame.GetFrameFormat().FindRealSdrObject();
                 if(ExportAsActiveXControl(pObject))
-                    m_aPostponedActiveXControls.push_back(PostponedDrawing(pObject, &(rFrame.GetFrameFormat()), &rNdTopLeft));
+                    m_aPostponedActiveXControls.push_back(PostponedDrawing(pObject, &(rFrame.GetFrameFormat())));
                 else
                     m_aPostponedFormControls.push_back(pObject);
                 m_bPostponedProcessingFly = true ;
             }
             break;
         default:
-            SAL_INFO("sw.ww8", "TODO DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame& rFrame, const Point& rNdTopLeft ) - frame type " <<
+            SAL_INFO("sw.ww8", "TODO DocxAttributeOutput::OutputFlyFrame_Impl( const ww8::Frame& rFrame ) - frame type " <<
                     ( rFrame.GetWriterType() == ww8::Frame::eTextBox ? "eTextBox":
                       ( rFrame.GetWriterType() == ww8::Frame::eOle ? "eOle": "???" ) ) );
             break;
diff --git a/sw/source/filter/ww8/docxattributeoutput.hxx b/sw/source/filter/ww8/docxattributeoutput.hxx
index 54d67559b35e..0d716e7129fd 100644
--- a/sw/source/filter/ww8/docxattributeoutput.hxx
+++ b/sw/source/filter/ww8/docxattributeoutput.hxx
@@ -417,7 +417,7 @@ private:
     bool PostponeOLE( SwOLENode& rNode, const Size& rSize, const SwFlyFrameFormat* pFlyFrameFormat );
     void WriteOLE( SwOLENode& rNode, const Size& rSize, const SwFlyFrameFormat* rFlyFrameFormat );
 
-    void WriteActiveXControl(const SdrObject* pObject, const SwFrameFormat& rFrameFormat, const Point& rNdTopLeft);
+    void WriteActiveXControl(const SdrObject* pObject, const SwFrameFormat& rFrameFormat);
     bool ExportAsActiveXControl(const SdrObject* pObject) const;
 
     /// checks whether the current component is a diagram
@@ -854,10 +854,9 @@ private:
 
     struct PostponedDrawing
     {
-        PostponedDrawing( const SdrObject* sdrObj, const SwFrameFormat* frm, const Point* pt ) : object( sdrObj ), frame( frm ), point( pt ) {};
+        PostponedDrawing( const SdrObject* sdrObj, const SwFrameFormat* frm) : object( sdrObj ), frame( frm ) {};
         const SdrObject* object;
         const SwFrameFormat* frame;
-        const Point* point;
     };
     std::unique_ptr< std::list<PostponedDrawing> > m_pPostponedDMLDrawings;
     std::unique_ptr< std::list<PostponedDrawing> > m_pPostponedCustomShape;
diff --git a/sw/source/filter/ww8/docxsdrexport.cxx b/sw/source/filter/ww8/docxsdrexport.cxx
index ee5e4af200b5..ee2c646d536d 100644
--- a/sw/source/filter/ww8/docxsdrexport.cxx
+++ b/sw/source/filter/ww8/docxsdrexport.cxx
@@ -754,7 +754,7 @@ void DocxSdrExport::endDMLAnchorInline(const SwFrameFormat* pFrameFormat)
     m_pImpl->m_bDrawingOpen = false;
 }
 
-void DocxSdrExport::writeVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat,const Point& rNdTopLeft)
+void DocxSdrExport::writeVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat)
 {
     bool bSwapInPage = false;
     if (!sdrObj->GetPage())
@@ -778,7 +778,7 @@ void DocxSdrExport::writeVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat
     m_pImpl->m_rExport.VMLExporter().AddSdrObject(*sdrObj,
             rHoriOri.GetHoriOrient(), rVertOri.GetVertOrient(),
             rHoriOri.GetRelationOrient(),
-            rVertOri.GetRelationOrient(), (&rNdTopLeft), true);
+            rVertOri.GetRelationOrient(), true);
     m_pImpl->m_pSerializer->endElementNS(XML_w, XML_pict);
 
     if (bSwapInPage)
@@ -928,7 +928,7 @@ bool DocxSdrExport::Impl::isSupportedDMLShape(const uno::Reference<drawing::XSha
     return supported;
 }
 
-void DocxSdrExport::writeDMLAndVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat,const Point& rNdTopLeft, int nAnchorId)
+void DocxSdrExport::writeDMLAndVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat, int nAnchorId)
 {
     bool bDMLAndVMLDrawingOpen = m_pImpl->m_bDMLAndVMLDrawingOpen;
     m_pImpl->m_bDMLAndVMLDrawingOpen = true;
@@ -958,13 +958,13 @@ void DocxSdrExport::writeDMLAndVMLDrawing(const SdrObject* sdrObj, const SwFrame
         m_pImpl->m_pSerializer->endElementNS(XML_mc, XML_Choice);
 
         m_pImpl->m_pSerializer->startElementNS(XML_mc, XML_Fallback, FSEND);
-        writeVMLDrawing(sdrObj, rFrameFormat, rNdTopLeft);
+        writeVMLDrawing(sdrObj, rFrameFormat);
         m_pImpl->m_pSerializer->endElementNS(XML_mc, XML_Fallback);
 
         m_pImpl->m_pSerializer->endElementNS(XML_mc, XML_AlternateContent);
     }
     else
-        writeVMLDrawing(sdrObj, rFrameFormat, rNdTopLeft);
+        writeVMLDrawing(sdrObj, rFrameFormat);
 
     m_pImpl->m_bDMLAndVMLDrawingOpen = false;
 }
diff --git a/sw/source/filter/ww8/docxsdrexport.hxx b/sw/source/filter/ww8/docxsdrexport.hxx
index 9183091f71f8..59871e7511f0 100644
--- a/sw/source/filter/ww8/docxsdrexport.hxx
+++ b/sw/source/filter/ww8/docxsdrexport.hxx
@@ -88,11 +88,11 @@ public:
     void startDMLAnchorInline(const SwFrameFormat* pFrameFormat, const Size& rSize);
     void endDMLAnchorInline(const SwFrameFormat* pFrameFormat);
     /// Writes a drawing as VML data.
-    void writeVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat,const Point& rNdTopLeft);
+    void writeVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat);
     /// Writes a drawing as DML.
     void writeDMLDrawing(const SdrObject* pSdrObject, const SwFrameFormat* pFrameFormat, int nAnchorId);
     /// Writes shape in both DML and VML format.
-    void writeDMLAndVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat,const Point& rNdTopLeft, int nAnchorId);
+    void writeDMLAndVMLDrawing(const SdrObject* sdrObj, const SwFrameFormat& rFrameFormat, int nAnchorId);
     /// Write <a:effectLst>, the effect list.
     void writeDMLEffectLst(const SwFrameFormat& rFrameFormat);
     /// Writes a diagram (smartart).