diff options
| -rw-r--r-- | chart2/Library_chartcontroller.mk | 1 | ||||
| -rw-r--r-- | chart2/source/controller/dialogs/ChartResourceGroups.cxx | 450 | ||||
| -rw-r--r-- | chart2/source/inc/ChartResourceGroups.hxx | 427 |
3 files changed, 457 insertions, 421 deletions
diff --git a/chart2/Library_chartcontroller.mk b/chart2/Library_chartcontroller.mk index 677d4e7e5607..e57a170a80c7 100644 --- a/chart2/Library_chartcontroller.mk +++ b/chart2/Library_chartcontroller.mk @@ -86,6 +86,7 @@ $(eval $(call gb_Library_add_exception_objects,chartcontroller,\ chart2/source/controller/chartapiwrapper/WrappedSymbolProperties \ chart2/source/controller/chartapiwrapper/WrappedTextRotationProperty \ chart2/source/controller/dialogs/ChangingResource \ + chart2/source/controller/dialogs/ChartResourceGroups \ chart2/source/controller/dialogs/ChartTypeDialogController \ chart2/source/controller/dialogs/DataBrowser \ chart2/source/controller/dialogs/DataBrowserModel \ diff --git a/chart2/source/controller/dialogs/ChartResourceGroups.cxx b/chart2/source/controller/dialogs/ChartResourceGroups.cxx new file mode 100644 index 000000000000..0e449881dc58 --- /dev/null +++ b/chart2/source/controller/dialogs/ChartResourceGroups.cxx @@ -0,0 +1,450 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <ChartResourceGroups.hxx> + +namespace chart +{ +using namespace ::com::sun::star; +using namespace ::com::sun::star::chart2; + +Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder) + : ChangingResource() + , m_xCB_3DLook(pBuilder->weld_check_button("3dlook")) + , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme")) +{ + m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl)); + m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl)); +} + +void Dim3DLookResourceGroup::showControls(bool bShow) +{ + m_xCB_3DLook->set_visible(bShow); + m_xLB_Scheme->set_visible(bShow); +} + +void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_3DLook->set_active(rParameter.b3DLook); + m_xLB_Scheme->set_sensitive(rParameter.b3DLook); + + if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple) + m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE); + else if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic) + m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC); + else + m_xLB_Scheme->set_active(-1); +} + +void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.b3DLook = m_xCB_3DLook->get_active(); + const int nPos = m_xLB_Scheme->get_active(); + if (nPos == POS_3DSCHEME_SIMPLE) + rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple; + else if (nPos == POS_3DSCHEME_REALISTIC) + rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic; + else + rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown; +} + +IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder) + : ChangingResource() + , m_xCB_XValueSorting(pBuilder->weld_check_button("sort")) +{ + m_xCB_XValueSorting->connect_toggled( + LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl)); +} + +void SortByXValuesResourceGroup::showControls(bool bShow) +{ + m_xCB_XValueSorting->set_visible(bShow); +} + +void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_XValueSorting->set_active(rParameter.bSortByXValues); +} + +void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.bSortByXValues = m_xCB_XValueSorting->get_active(); +} + +IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder) + : ChangingResource() + , m_xCB_Stacked(pBuilder->weld_check_button("stack")) + , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop")) + , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent")) + , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep")) +{ + m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl)); + m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); + m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); + m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); +} + +void StackingResourceGroup::showControls(bool bShow, bool bShowDeepStacking) +{ + m_xCB_Stacked->set_visible(bShow); + m_xRB_Stack_Y->set_visible(bShow); + m_xRB_Stack_Y_Percent->set_visible(bShow); + m_xRB_Stack_Z->set_visible(bShow && bShowDeepStacking); +} + +void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + m_xCB_Stacked->set_active( + rParameter.eStackMode != GlobalStackMode_NONE + && rParameter.eStackMode + != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used + switch (rParameter.eStackMode) + { + case GlobalStackMode_STACK_Y: + m_xRB_Stack_Y->set_active(true); + break; + case GlobalStackMode_STACK_Y_PERCENT: + m_xRB_Stack_Y_Percent->set_active(true); + break; + case GlobalStackMode_STACK_Z: + //todo uncomment this condition if z stacking radio button is really used + /* + if( rParameter.b3DLook ) + m_xRB_Stack_Z->set_active(true); + else + */ + m_xRB_Stack_Y->set_active(true); + break; + default: + m_xRB_Stack_Y->set_active(true); + break; + } + //dis/enabling + m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues); + m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues); + m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active() + && !rParameter.bXAxisWithValues); + m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook); +} + +void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + if (!m_xCB_Stacked->get_active()) + rParameter.eStackMode = GlobalStackMode_NONE; + else if (m_xRB_Stack_Y->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Y; + else if (m_xRB_Stack_Y_Percent->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT; + else if (m_xRB_Stack_Z->get_active()) + rParameter.eStackMode = GlobalStackMode_STACK_Z; +} + +IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void) +{ + //for each radio click there are coming two change events + //first uncheck of previous button -> ignore that call + //the second call gives the check of the new button + if (m_pChangeListener && rRadio.get_active()) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent) + : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog") + , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox")) + , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton")) + , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel")) + , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton")) +{ + m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); + + m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl)); +} + +void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_CUBIC_SPLINES: + m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); + break; + case CurveStyle_B_SPLINES: + m_xLB_Spline_Type->set_active(B_SPLINE_POS); + break; + default: + m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); + break; + } + m_xMF_SplineOrder->set_value(rParameter.nSplineOrder); + m_xMF_SplineResolution->set_value(rParameter.nCurveResolution); + + //dis/enabling + m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); + m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); +} + +void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines) +{ + if (!bSmoothLines) + rParameter.eCurveStyle = CurveStyle_LINES; + else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS) + rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES; + else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS) + rParameter.eCurveStyle = CurveStyle_B_SPLINES; + + rParameter.nCurveResolution = m_xMF_SplineResolution->get_value(); + rParameter.nSplineOrder = m_xMF_SplineOrder->get_value(); +} + +IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void) +{ + m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); + m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); +} + +SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent) + : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog") + , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb")) + , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb")) + , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb")) + , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb")) +{ + m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); +} + +void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_STEP_END: + m_xRB_End->set_active(true); + break; + case CurveStyle_STEP_CENTER_X: + m_xRB_CenterX->set_active(true); + break; + case CurveStyle_STEP_CENTER_Y: + m_xRB_CenterY->set_active(true); + break; + default: // includes CurveStyle_STEP_START + m_xRB_Start->set_active(true); + break; + } +} +void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines) +{ + if (!bSteppedLines) + rParameter.eCurveStyle = CurveStyle_LINES; + else if (m_xRB_CenterY->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y; + else if (m_xRB_Start->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_START; + else if (m_xRB_End->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_END; + else if (m_xRB_CenterX->get_active()) + rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X; +} + +SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent) + : ChangingResource() + , m_pParent(pParent) + , m_xFT_LineType(pBuilder->weld_label("linetypeft")) + , m_xLB_LineType(pBuilder->weld_combo_box("linetype")) + , m_xPB_DetailsDialog(pBuilder->weld_button("properties")) +{ + m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl)); +} + +SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog() +{ + if (!m_xSplinePropertiesDialog) + { + m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent)); + } + return *m_xSplinePropertiesDialog; +} + +SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog() +{ + if (!m_xSteppedPropertiesDialog) + { + m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent)); + } + return *m_xSteppedPropertiesDialog; +} + +void SplineResourceGroup::showControls(bool bShow) +{ + m_xFT_LineType->set_visible(bShow); + m_xLB_LineType->set_visible(bShow); + m_xPB_DetailsDialog->set_visible(bShow); +} + +void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + switch (rParameter.eCurveStyle) + { + case CurveStyle_LINES: + m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT); + m_xPB_DetailsDialog->set_sensitive(false); + break; + case CurveStyle_CUBIC_SPLINES: + case CurveStyle_B_SPLINES: + m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); + m_xPB_DetailsDialog->set_sensitive(true); + m_xPB_DetailsDialog->connect_clicked( + LINK(this, SplineResourceGroup, SplineDetailsDialogHdl)); + m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); + getSplinePropertiesDialog().fillControls(rParameter); + break; + case CurveStyle_STEP_START: + case CurveStyle_STEP_END: + case CurveStyle_STEP_CENTER_X: + case CurveStyle_STEP_CENTER_Y: + m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); + m_xPB_DetailsDialog->set_sensitive(true); + m_xPB_DetailsDialog->connect_clicked( + LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl)); + m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); + getSteppedPropertiesDialog().fillControls(rParameter); + break; + default: + m_xLB_LineType->set_active(-1); + m_xPB_DetailsDialog->set_sensitive(false); + } +} +void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + switch (m_xLB_LineType->get_active()) + { + case POS_LINETYPE_SMOOTH: + getSplinePropertiesDialog().fillParameter(rParameter, true); + break; + case POS_LINETYPE_STEPPED: + getSteppedPropertiesDialog().fillParameter(rParameter, true); + break; + default: // includes POS_LINETYPE_STRAIGHT + rParameter.eCurveStyle = CurveStyle_LINES; + break; + } +} + +IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void) +{ + ChartTypeParameter aOldParameter; + getSplinePropertiesDialog().fillParameter(aOldParameter, + m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH); + + const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); + m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); + if (getSplinePropertiesDialog().run() == RET_OK) + { + if (m_pChangeListener) + m_pChangeListener->stateChanged(); + } + else + { + //restore old state: + m_xLB_LineType->set_active(iOldLineTypePos); + getSplinePropertiesDialog().fillControls(aOldParameter); + } +} + +IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void) +{ + ChartTypeParameter aOldParameter; + getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active() + == POS_LINETYPE_STEPPED); + + const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); + m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); + if (getSteppedPropertiesDialog().run() == RET_OK) + { + if (m_pChangeListener) + m_pChangeListener->stateChanged(); + } + else + { + //restore old state: + m_xLB_LineType->set_active(iOldLineTypePos); + getSteppedPropertiesDialog().fillControls(aOldParameter); + } +} + +GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder) + : ChangingResource() + , m_aGeometryResources(pBuilder) +{ + m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl)); +} + +void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); } + +void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter) +{ + sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D); + m_aGeometryResources.select(nGeometry3D); + m_aGeometryResources.set_sensitive(rParameter.b3DLook); +} + +void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter) +{ + rParameter.nGeometry3D = 1; + int nSelected = m_aGeometryResources.get_selected_index(); + if (nSelected != -1) + rParameter.nGeometry3D = nSelected; +} + +IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void) +{ + if (m_pChangeListener) + m_pChangeListener->stateChanged(); +} + +} //namespace chart + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ diff --git a/chart2/source/inc/ChartResourceGroups.hxx b/chart2/source/inc/ChartResourceGroups.hxx index 343462b9893d..3e04fe1f1d81 100644 --- a/chart2/source/inc/ChartResourceGroups.hxx +++ b/chart2/source/inc/ChartResourceGroups.hxx @@ -24,6 +24,12 @@ #include "ResId.hxx" #include "res_BarGeometry.hxx" +#include "ChangingResource.hxx" +#include "ChartTypeDialogController.hxx" + +#include <vcl/tabpage.hxx> + +#include <com/sun/star/chart2/XChartDocument.hpp> namespace chart { @@ -55,58 +61,6 @@ private: std::unique_ptr<weld::ComboBox> m_xLB_Scheme; }; -Dim3DLookResourceGroup::Dim3DLookResourceGroup(weld::Builder* pBuilder) - : ChangingResource() - , m_xCB_3DLook(pBuilder->weld_check_button("3dlook")) - , m_xLB_Scheme(pBuilder->weld_combo_box("3dscheme")) -{ - m_xCB_3DLook->connect_toggled(LINK(this, Dim3DLookResourceGroup, Dim3DLookCheckHdl)); - m_xLB_Scheme->connect_changed(LINK(this, Dim3DLookResourceGroup, SelectSchemeHdl)); -} - -void Dim3DLookResourceGroup::showControls(bool bShow) -{ - m_xCB_3DLook->set_visible(bShow); - m_xLB_Scheme->set_visible(bShow); -} - -void Dim3DLookResourceGroup::fillControls(const ChartTypeParameter& rParameter) -{ - m_xCB_3DLook->set_active(rParameter.b3DLook); - m_xLB_Scheme->set_sensitive(rParameter.b3DLook); - - if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Simple) - m_xLB_Scheme->set_active(POS_3DSCHEME_SIMPLE); - else if (rParameter.eThreeDLookScheme == ThreeDLookScheme_Realistic) - m_xLB_Scheme->set_active(POS_3DSCHEME_REALISTIC); - else - m_xLB_Scheme->set_active(-1); -} - -void Dim3DLookResourceGroup::fillParameter(ChartTypeParameter& rParameter) -{ - rParameter.b3DLook = m_xCB_3DLook->get_active(); - const int nPos = m_xLB_Scheme->get_active(); - if (nPos == POS_3DSCHEME_SIMPLE) - rParameter.eThreeDLookScheme = ThreeDLookScheme_Simple; - else if (nPos == POS_3DSCHEME_REALISTIC) - rParameter.eThreeDLookScheme = ThreeDLookScheme_Realistic; - else - rParameter.eThreeDLookScheme = ThreeDLookScheme_Unknown; -} - -IMPL_LINK_NOARG(Dim3DLookResourceGroup, Dim3DLookCheckHdl, weld::ToggleButton&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - -IMPL_LINK_NOARG(Dim3DLookResourceGroup, SelectSchemeHdl, weld::ComboBox&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - class SortByXValuesResourceGroup : public ChangingResource { public: @@ -124,35 +78,6 @@ private: std::unique_ptr<weld::CheckButton> m_xCB_XValueSorting; }; -SortByXValuesResourceGroup::SortByXValuesResourceGroup(weld::Builder* pBuilder) - : ChangingResource() - , m_xCB_XValueSorting(pBuilder->weld_check_button("sort")) -{ - m_xCB_XValueSorting->connect_toggled( - LINK(this, SortByXValuesResourceGroup, SortByXValuesCheckHdl)); -} - -void SortByXValuesResourceGroup::showControls(bool bShow) -{ - m_xCB_XValueSorting->set_visible(bShow); -} - -void SortByXValuesResourceGroup::fillControls(const ChartTypeParameter& rParameter) -{ - m_xCB_XValueSorting->set_active(rParameter.bSortByXValues); -} - -void SortByXValuesResourceGroup::fillParameter(ChartTypeParameter& rParameter) -{ - rParameter.bSortByXValues = m_xCB_XValueSorting->get_active(); -} - -IMPL_LINK_NOARG(SortByXValuesResourceGroup, SortByXValuesCheckHdl, weld::ToggleButton&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - class StackingResourceGroup : public ChangingResource { public: @@ -174,89 +99,6 @@ private: std::unique_ptr<weld::RadioButton> m_xRB_Stack_Z; }; -StackingResourceGroup::StackingResourceGroup(weld::Builder* pBuilder) - : ChangingResource() - , m_xCB_Stacked(pBuilder->weld_check_button("stack")) - , m_xRB_Stack_Y(pBuilder->weld_radio_button("ontop")) - , m_xRB_Stack_Y_Percent(pBuilder->weld_radio_button("percent")) - , m_xRB_Stack_Z(pBuilder->weld_radio_button("deep")) -{ - m_xCB_Stacked->connect_toggled(LINK(this, StackingResourceGroup, StackingEnableHdl)); - m_xRB_Stack_Y->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); - m_xRB_Stack_Y_Percent->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); - m_xRB_Stack_Z->connect_toggled(LINK(this, StackingResourceGroup, StackingChangeHdl)); -} - -void StackingResourceGroup::showControls(bool bShow, bool bShowDeepStacking) -{ - m_xCB_Stacked->set_visible(bShow); - m_xRB_Stack_Y->set_visible(bShow); - m_xRB_Stack_Y_Percent->set_visible(bShow); - m_xRB_Stack_Z->set_visible(bShow && bShowDeepStacking); -} - -void StackingResourceGroup::fillControls(const ChartTypeParameter& rParameter) -{ - m_xCB_Stacked->set_active( - rParameter.eStackMode != GlobalStackMode_NONE - && rParameter.eStackMode - != GlobalStackMode_STACK_Z); //todo remove this condition if z stacking radio button is really used - switch (rParameter.eStackMode) - { - case GlobalStackMode_STACK_Y: - m_xRB_Stack_Y->set_active(true); - break; - case GlobalStackMode_STACK_Y_PERCENT: - m_xRB_Stack_Y_Percent->set_active(true); - break; - case GlobalStackMode_STACK_Z: - //todo uncomment this condition if z stacking radio button is really used - /* - if( rParameter.b3DLook ) - m_xRB_Stack_Z->set_active(true); - else - */ - m_xRB_Stack_Y->set_active(true); - break; - default: - m_xRB_Stack_Y->set_active(true); - break; - } - //dis/enabling - m_xCB_Stacked->set_sensitive(!rParameter.bXAxisWithValues); - m_xRB_Stack_Y->set_sensitive(m_xCB_Stacked->get_active() && !rParameter.bXAxisWithValues); - m_xRB_Stack_Y_Percent->set_sensitive(m_xCB_Stacked->get_active() - && !rParameter.bXAxisWithValues); - m_xRB_Stack_Z->set_sensitive(m_xCB_Stacked->get_active() && rParameter.b3DLook); -} - -void StackingResourceGroup::fillParameter(ChartTypeParameter& rParameter) -{ - if (!m_xCB_Stacked->get_active()) - rParameter.eStackMode = GlobalStackMode_NONE; - else if (m_xRB_Stack_Y->get_active()) - rParameter.eStackMode = GlobalStackMode_STACK_Y; - else if (m_xRB_Stack_Y_Percent->get_active()) - rParameter.eStackMode = GlobalStackMode_STACK_Y_PERCENT; - else if (m_xRB_Stack_Z->get_active()) - rParameter.eStackMode = GlobalStackMode_STACK_Z; -} - -IMPL_LINK(StackingResourceGroup, StackingChangeHdl, weld::ToggleButton&, rRadio, void) -{ - //for each radio click there are coming two change events - //first uncheck of previous button -> ignore that call - //the second call gives the check of the new button - if (m_pChangeListener && rRadio.get_active()) - m_pChangeListener->stateChanged(); -} - -IMPL_LINK_NOARG(StackingResourceGroup, StackingEnableHdl, weld::ToggleButton&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - class SplinePropertiesDialog : public weld::GenericDialogController { public: @@ -278,59 +120,6 @@ private: const sal_uInt16 CUBIC_SPLINE_POS = 0; const sal_uInt16 B_SPLINE_POS = 1; -SplinePropertiesDialog::SplinePropertiesDialog(weld::Window* pParent) - : GenericDialogController(pParent, "modules/schart/ui/smoothlinesdlg.ui", "SmoothLinesDialog") - , m_xLB_Spline_Type(m_xBuilder->weld_combo_box("SplineTypeComboBox")) - , m_xMF_SplineResolution(m_xBuilder->weld_spin_button("ResolutionSpinbutton")) - , m_xFT_SplineOrder(m_xBuilder->weld_label("PolynomialsLabel")) - , m_xMF_SplineOrder(m_xBuilder->weld_spin_button("PolynomialsSpinButton")) -{ - m_xDialog->set_title(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); - - m_xLB_Spline_Type->connect_changed(LINK(this, SplinePropertiesDialog, SplineTypeListBoxHdl)); -} - -void SplinePropertiesDialog::fillControls(const ChartTypeParameter& rParameter) -{ - switch (rParameter.eCurveStyle) - { - case CurveStyle_CUBIC_SPLINES: - m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); - break; - case CurveStyle_B_SPLINES: - m_xLB_Spline_Type->set_active(B_SPLINE_POS); - break; - default: - m_xLB_Spline_Type->set_active(CUBIC_SPLINE_POS); - break; - } - m_xMF_SplineOrder->set_value(rParameter.nSplineOrder); - m_xMF_SplineResolution->set_value(rParameter.nCurveResolution); - - //dis/enabling - m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); - m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); -} - -void SplinePropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSmoothLines) -{ - if (!bSmoothLines) - rParameter.eCurveStyle = CurveStyle_LINES; - else if (m_xLB_Spline_Type->get_active() == CUBIC_SPLINE_POS) - rParameter.eCurveStyle = CurveStyle_CUBIC_SPLINES; - else if (m_xLB_Spline_Type->get_active() == B_SPLINE_POS) - rParameter.eCurveStyle = CurveStyle_B_SPLINES; - - rParameter.nCurveResolution = m_xMF_SplineResolution->get_value(); - rParameter.nSplineOrder = m_xMF_SplineOrder->get_value(); -} - -IMPL_LINK_NOARG(SplinePropertiesDialog, SplineTypeListBoxHdl, weld::ComboBox&, void) -{ - m_xFT_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); - m_xMF_SplineOrder->set_sensitive(m_xLB_Spline_Type->get_active() == B_SPLINE_POS); -} - class SteppedPropertiesDialog : public weld::GenericDialogController { public: @@ -346,48 +135,6 @@ private: std::unique_ptr<weld::RadioButton> m_xRB_CenterY; }; -SteppedPropertiesDialog::SteppedPropertiesDialog(weld::Window* pParent) - : GenericDialogController(pParent, "modules/schart/ui/steppedlinesdlg.ui", "SteppedLinesDialog") - , m_xRB_Start(m_xBuilder->weld_radio_button("step_start_rb")) - , m_xRB_End(m_xBuilder->weld_radio_button("step_end_rb")) - , m_xRB_CenterX(m_xBuilder->weld_radio_button("step_center_x_rb")) - , m_xRB_CenterY(m_xBuilder->weld_radio_button("step_center_y_rb")) -{ - m_xDialog->set_title(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); -} - -void SteppedPropertiesDialog::fillControls(const ChartTypeParameter& rParameter) -{ - switch (rParameter.eCurveStyle) - { - case CurveStyle_STEP_END: - m_xRB_End->set_active(true); - break; - case CurveStyle_STEP_CENTER_X: - m_xRB_CenterX->set_active(true); - break; - case CurveStyle_STEP_CENTER_Y: - m_xRB_CenterY->set_active(true); - break; - default: // includes CurveStyle_STEP_START - m_xRB_Start->set_active(true); - break; - } -} -void SteppedPropertiesDialog::fillParameter(ChartTypeParameter& rParameter, bool bSteppedLines) -{ - if (!bSteppedLines) - rParameter.eCurveStyle = CurveStyle_LINES; - else if (m_xRB_CenterY->get_active()) - rParameter.eCurveStyle = CurveStyle_STEP_CENTER_Y; - else if (m_xRB_Start->get_active()) - rParameter.eCurveStyle = CurveStyle_STEP_START; - else if (m_xRB_End->get_active()) - rParameter.eCurveStyle = CurveStyle_STEP_END; - else if (m_xRB_CenterX->get_active()) - rParameter.eCurveStyle = CurveStyle_STEP_CENTER_X; -} - #define POS_LINETYPE_STRAIGHT 0 #define POS_LINETYPE_SMOOTH 1 #define POS_LINETYPE_STEPPED 2 @@ -418,138 +165,6 @@ private: std::unique_ptr<SteppedPropertiesDialog> m_xSteppedPropertiesDialog; }; -SplineResourceGroup::SplineResourceGroup(weld::Builder* pBuilder, weld::Window* pParent) - : ChangingResource() - , m_pParent(pParent) - , m_xFT_LineType(pBuilder->weld_label("linetypeft")) - , m_xLB_LineType(pBuilder->weld_combo_box("linetype")) - , m_xPB_DetailsDialog(pBuilder->weld_button("properties")) -{ - m_xLB_LineType->connect_changed(LINK(this, SplineResourceGroup, LineTypeChangeHdl)); -} - -SplinePropertiesDialog& SplineResourceGroup::getSplinePropertiesDialog() -{ - if (!m_xSplinePropertiesDialog) - { - m_xSplinePropertiesDialog.reset(new SplinePropertiesDialog(m_pParent)); - } - return *m_xSplinePropertiesDialog; -} - -SteppedPropertiesDialog& SplineResourceGroup::getSteppedPropertiesDialog() -{ - if (!m_xSteppedPropertiesDialog) - { - m_xSteppedPropertiesDialog.reset(new SteppedPropertiesDialog(m_pParent)); - } - return *m_xSteppedPropertiesDialog; -} - -void SplineResourceGroup::showControls(bool bShow) -{ - m_xFT_LineType->set_visible(bShow); - m_xLB_LineType->set_visible(bShow); - m_xPB_DetailsDialog->set_visible(bShow); -} - -void SplineResourceGroup::fillControls(const ChartTypeParameter& rParameter) -{ - switch (rParameter.eCurveStyle) - { - case CurveStyle_LINES: - m_xLB_LineType->set_active(POS_LINETYPE_STRAIGHT); - m_xPB_DetailsDialog->set_sensitive(false); - break; - case CurveStyle_CUBIC_SPLINES: - case CurveStyle_B_SPLINES: - m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); - m_xPB_DetailsDialog->set_sensitive(true); - m_xPB_DetailsDialog->connect_clicked( - LINK(this, SplineResourceGroup, SplineDetailsDialogHdl)); - m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_SMOOTH_LINE_PROPERTIES)); - getSplinePropertiesDialog().fillControls(rParameter); - break; - case CurveStyle_STEP_START: - case CurveStyle_STEP_END: - case CurveStyle_STEP_CENTER_X: - case CurveStyle_STEP_CENTER_Y: - m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); - m_xPB_DetailsDialog->set_sensitive(true); - m_xPB_DetailsDialog->connect_clicked( - LINK(this, SplineResourceGroup, SteppedDetailsDialogHdl)); - m_xPB_DetailsDialog->set_tooltip_text(SchResId(STR_DLG_STEPPED_LINE_PROPERTIES)); - getSteppedPropertiesDialog().fillControls(rParameter); - break; - default: - m_xLB_LineType->set_active(-1); - m_xPB_DetailsDialog->set_sensitive(false); - } -} -void SplineResourceGroup::fillParameter(ChartTypeParameter& rParameter) -{ - switch (m_xLB_LineType->get_active()) - { - case POS_LINETYPE_SMOOTH: - getSplinePropertiesDialog().fillParameter(rParameter, true); - break; - case POS_LINETYPE_STEPPED: - getSteppedPropertiesDialog().fillParameter(rParameter, true); - break; - default: // includes POS_LINETYPE_STRAIGHT - rParameter.eCurveStyle = CurveStyle_LINES; - break; - } -} - -IMPL_LINK_NOARG(SplineResourceGroup, LineTypeChangeHdl, weld::ComboBox&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - -IMPL_LINK_NOARG(SplineResourceGroup, SplineDetailsDialogHdl, weld::Button&, void) -{ - ChartTypeParameter aOldParameter; - getSplinePropertiesDialog().fillParameter(aOldParameter, - m_xLB_LineType->get_active() == POS_LINETYPE_SMOOTH); - - const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); - m_xLB_LineType->set_active(POS_LINETYPE_SMOOTH); - if (getSplinePropertiesDialog().run() == RET_OK) - { - if (m_pChangeListener) - m_pChangeListener->stateChanged(); - } - else - { - //restore old state: - m_xLB_LineType->set_active(iOldLineTypePos); - getSplinePropertiesDialog().fillControls(aOldParameter); - } -} - -IMPL_LINK_NOARG(SplineResourceGroup, SteppedDetailsDialogHdl, weld::Button&, void) -{ - ChartTypeParameter aOldParameter; - getSteppedPropertiesDialog().fillParameter(aOldParameter, m_xLB_LineType->get_active() - == POS_LINETYPE_STEPPED); - - const sal_Int32 iOldLineTypePos = m_xLB_LineType->get_active(); - m_xLB_LineType->set_active(POS_LINETYPE_STEPPED); - if (getSteppedPropertiesDialog().run() == RET_OK) - { - if (m_pChangeListener) - m_pChangeListener->stateChanged(); - } - else - { - //restore old state: - m_xLB_LineType->set_active(iOldLineTypePos); - getSteppedPropertiesDialog().fillControls(aOldParameter); - } -} - class GeometryResourceGroup : public ChangingResource { public: @@ -567,36 +182,6 @@ private: BarGeometryResources m_aGeometryResources; }; -GeometryResourceGroup::GeometryResourceGroup(weld::Builder* pBuilder) - : ChangingResource() - , m_aGeometryResources(pBuilder) -{ - m_aGeometryResources.connect_changed(LINK(this, GeometryResourceGroup, GeometryChangeHdl)); -} - -void GeometryResourceGroup::showControls(bool bShow) { m_aGeometryResources.set_visible(bShow); } - -void GeometryResourceGroup::fillControls(const ChartTypeParameter& rParameter) -{ - sal_uInt16 nGeometry3D = static_cast<sal_uInt16>(rParameter.nGeometry3D); - m_aGeometryResources.select(nGeometry3D); - m_aGeometryResources.set_sensitive(rParameter.b3DLook); -} - -void GeometryResourceGroup::fillParameter(ChartTypeParameter& rParameter) -{ - rParameter.nGeometry3D = 1; - int nSelected = m_aGeometryResources.get_selected_index(); - if (nSelected != -1) - rParameter.nGeometry3D = nSelected; -} - -IMPL_LINK_NOARG(GeometryResourceGroup, GeometryChangeHdl, weld::TreeView&, void) -{ - if (m_pChangeListener) - m_pChangeListener->stateChanged(); -} - } //namespace chart #endif |