summaryrefslogtreecommitdiff
path: root/dmake/man/dmake.nc
diff options
context:
space:
mode:
Diffstat (limited to 'dmake/man/dmake.nc')
-rw-r--r--dmake/man/dmake.nc3644
1 files changed, 3644 insertions, 0 deletions
diff --git a/dmake/man/dmake.nc b/dmake/man/dmake.nc
new file mode 100644
index 000000000000..9961119ddf6b
--- /dev/null
+++ b/dmake/man/dmake.nc
@@ -0,0 +1,3644 @@
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+NAME
+ dmake - maintain program groups, or interdependent files
+
+SYNOPSIS
+ dmake [-P#] [-{f|C|K} file] [-{w|W} target ...]
+ [macro[[!][*][+][:]]=value ...] [-ABcdeEghiknpqrsStTuVxX]
+ [-v[cdfimrtw]] [-m[trae]] [target ...]
+
+DESCRIPTION
+ dmake is a re-implementation of the UNIX Make utility with significant
+ enhancements. dmake executes commands found in an external file called
+ a makefile to update one or more target names. Each target may depend
+ on zero or more prerequisite targets. If any of the target's prerequi-
+ sites is newer than the target or if the target itself does not exist,
+ then dmake will attempt to make the target.
+
+ If no -f command line option is present then dmake searches for an
+ existing makefile from the list of prerequisites specified for the spe-
+ cial target .MAKEFILES (see the STARTUP section for more details). If
+ "-" is the name of the file specified to the -f flag then dmake uses
+ standard input as the source of the makefile text.
+
+ Any macro definitions (arguments with embedded "=" signs) that appear
+ on the command line are processed first and supercede definitions for
+ macros of the same name found within the makefile. In general it is
+ impossible for definitions found inside the makefile to redefine a
+ macro defined on the command line, see the MACROS section for excep-
+ tions.
+
+ If no target names are specified on the command line, then dmake uses
+ the first non-special target found in the makefile as the default tar-
+ get. See the SPECIAL TARGETS section for the list of special targets
+ and their function. Makefiles written for most previous versions of
+ Make will be handled correctly by dmake. Known differences between
+ dmake and other versions of make are discussed in the COMPATIBILITY
+ section found at the end of this document. dmake returns 0 if no
+ errors were detected and a non-zero result if an error occurred.
+
+OPTIONS
+ -A Enable AUGMAKE special inference rule transformations (see the
+ "PERCENT(%) RULES" and "AUGMAKE META RULES" sections), these are
+ set to off by default.
+
+ -B Enable the use of spaces instead of <tabs> to begin recipe
+ lines. This flag equivalent to the .NOTABS special macro and is
+ further described below.
+
+ -c Use non-standard comment stripping. If you specify -c then
+ dmake will treat any # character as a start of comment character
+ wherever it may appear unless it is escaped by a \.
+
+ -C [+]file
+ This option writes to file a copy of standard output and stan-
+ dard error from any child processes and from the dmake process
+
+
+
+Dmake Version 4.12 2008-02-26 1
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ itself. If you specify a + prior to the file name then the text
+ is appended to the previous contents of file. This option is
+ active in the MSDOS implementation only and is ignored by non-
+ MSDOS versions of dmake.
+
+ -d Disable the use of the directory cache. Normally dmake caches
+ directories as it checks file timestamps. Giving this flag is
+ equivalent to the .DIRCACHE attribute or macro being set to no.
+
+ -E Read the environment and define all strings of the form
+ 'ENV-VAR=evalue' defined within as macros whose name is ENV-VAR,
+ and whose value is 'evalue'. The environment is processed prior
+ to processing the user specified makefile thereby allowing defi-
+ nitions in the makefile to override definitions in the environ-
+ ment.
+
+ -e Same as -E, except that the environment is processed after the
+ user specified makefile has been processed (thus definitions in
+ the environment override definitions in the makefile). The -e
+ and -E options are mutually exclusive. If both are given the
+ latter takes effect.
+
+ -f file
+ Use file as the source for the makefile text. Only one -f
+ option is allowed.
+
+ -g Globally disable group recipe parsing, equivalent to the
+ .IGNOREGROUP attribute or macro being set to yes at the start of
+ the makefile.
+
+ -h Print the command summary for dmake.
+
+ -i Tells dmake to ignore errors, and continue making other targets.
+ This is equivalent to the .IGNORE attribute or macro.
+
+ -K file
+ Turns on .KEEP_STATE state tracking and tells dmake to use file
+ as the state file.
+
+ -k Causes dmake to ignore errors caused by command execution and to
+ make all targets not depending on targets that could not be
+ made. Ordinarily dmake stops after a command returns a non-zero
+ status, specifying -k causes dmake to ignore the error and con-
+ tinue to make as much as possible.
+
+ -m[trae]
+ Measure timing information. Print the time when targets and/or
+ recipes are started and finished to stdout. The following format
+ is used:
+
+ {s|e} {target|recipe} time maketarget
+
+ s or e stands for started or ended, target or recipe denotes if
+ this line refers to the whole target or a recipe. time is
+
+
+
+Dmake Version 4.12 2008-02-26 2
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ displayed in Unix time format, i.e. the number of seconds since
+ an epoch. (Since 1970-01-01T00:00:00Z). maketarget obviously
+ represents the target the timing information is given for. The
+ optional flags [trae] can be used to change the information that
+ is displayed. If no optional flags are given only the t flag is
+ assumed to be selected, ie. -mt. The optional flags stand for:
+
+ t Display the start and end time of each target.
+
+ r Display the start and end time of each recipe.
+
+ a Display the target as an absolute path, i.e. prepend the
+ current working directory.
+
+ e Also display the start and end time of the $(shell com-
+ mand) function (aka. shell escape) macros.
+
+ -n Causes dmake to print out what it would have executed, but does
+ not actually execute the commands. A special check is made for
+ the string "$(MAKE)" inside a recipe line, if it is found, the
+ line is expanded and invoked, thereby enabling recursive makes
+ to give a full description of all that they will do. This check
+ is disabled inside group recipes.
+
+ -p Print out a version of the digested makefile in human readable
+ form. (useful for debugging, but cannot be re-read by dmake)
+
+ -P# On systems that support multi-processing cause dmake to use #
+ concurrent child processes to make targets. See the "MULTI PRO-
+ CESSING" section for more information.
+
+ -q Check and see if the target is up to date. Exits with code 0 if
+ up to date, 1 otherwise.
+
+ -r Tells dmake not to read the initial startup makefile, see
+ STARTUP section for more details.
+
+ -s Tells dmake to do all its work silently and not echo the com-
+ mands it is executing to stdout (also suppresses warnings).
+ This is equivalent to the .SILENT attribute or macro.
+
+ -S Force sequential execution of recipes on architectures which
+ support concurrent makes. For backward compatibility with old
+ makefiles that have nasty side-effect prerequisite dependencies.
+ (Implies -P1)
+
+ -t Causes dmake to touch the targets and bring them up to date
+ without executing any commands. Note that targets will not be
+ created if they do not already exist.
+
+ -T Tells dmake to not perform transitive closure on the inference
+ graph.
+
+ -u Force an unconditional update. (ie. do everything that would be
+ done if everything that a target depended on was out of date)
+
+
+
+Dmake Version 4.12 2008-02-26 3
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ -v[cdfimrtw]
+ Verbose flag, when making targets print to stdout what we are
+ going to make and what we think its time stamp is. The optional
+ flags [cdfimrtw] can be used to restrict the information that is
+ displayed. In the absence of any optional flags all are assumed
+ to be given (ie. -v is equivalent to -vcdfimrtw). The meanings
+ of the optional flags are:
+
+ c Notify of directory cache operations only.
+
+ d Notify of change directory operations only.
+
+ f Notify of file I/O operations only.
+
+ i Notify of inference algorithm operation only.
+
+ m Notify of target update operations only.
+
+ r Force output of recipe lines, warnings and executed com-
+ mands. This switch is usefull when debugging makefiles
+ that disable the output using the @ or @@ property for
+ recipe lines or the .SILENT target/attribute. It also
+ overrides the -s flag.
+
+ t Keep any temporary files created; normally they are auto-
+ matically deleted.
+
+ w Notify of non-essential warnings (these are historical).
+
+ -V Print the version of dmake, and values of builtin macros.
+
+ -W target
+ Run dmake pretending that target is out of date.
+
+ -w target
+ What if? Show what would be made if target were out of date.
+
+ -x Upon processing the user makefile export all non-internally
+ defined macros to the user's environment. This option together
+ with the -e option allows SYSV AUGMAKE recursive makes to func-
+ tion as expected.
+
+ -X Inhibit the execution of #! lines found at the beginning of a
+ makefile. The use of this flag prevents non-termination of
+ recursive make invocations.
+
+INDEX
+ Here is a list of the sections that follow and a short description of
+ each. Perhaps you won't have to read the entire man page to find what
+ you need.
+
+ STARTUP Describes dmake initialization.
+
+ SYNTAX Describes the syntax of makefile expressions.
+
+
+
+
+Dmake Version 4.12 2008-02-26 4
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ ATTRIBUTES Describes the notion of attributes and how they are
+ used when making targets.
+
+ MACROS Defining and expanding macros.
+
+ RULES AND TARGETS How to define targets and their prerequisites.
+
+ RECIPES How to tell dmake how to make a target.
+
+ BUILTIN COMMANDS Internal dmake commands.
+
+ TEXT DIVERSIONS How to use text diversions in recipes and macro
+ expansions.
+
+ VIRTUAL TARGETS Targets that only enforce dependencies, but which
+ can not create a target file.
+
+ SPECIAL TARGETS Some targets are special.
+
+ SPECIAL MACROS Macros used by dmake to alter the processing of the
+ makefile, and those defined by dmake for the user.
+
+ CONTROL MACROS Itemized list of special control macros.
+
+ RUNTIME MACROS Discussion of special run-time macros such as $@ and
+ $<.
+
+ FUNCTION MACROS Description of functional macros.
+
+ CONDITIONAL MACROS Target specific conditional macros.
+
+ DYNAMIC PREREQUISITES
+ Processing of prerequisites which contain macro
+ expansions in their name.
+
+ BINDING TARGETS The rules that dmake uses to bind a target to an
+ existing file in the file system.
+
+ PERCENT(%) RULES Specification of recipes to be used by the inference
+ algorithm.
+
+ MAKING INFERENCES The rules that dmake uses when inferring how to make
+ a target which has no explicit recipe. This and the
+ previous section are really a single section in the
+ text.
+
+ AUGMAKE META RULES A subclass of the PERCENT(%) RULES.
+
+ MAKING TARGETS How dmake makes targets other than libraries.
+
+ MAKING LIBRARIES How dmake makes libraries.
+
+ KEEP STATE A discussion of how .KEEP_STATE works.
+
+ MULTI PROCESSING Discussion of dmake's parallel make facilities for
+ architectures that support them.
+
+
+
+Dmake Version 4.12 2008-02-26 5
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ CONDITIONALS Conditional expressions which control the processing
+ of the makefile.
+
+ EXAMPLES Some hopefully useful examples.
+
+ COMPATIBILITY How dmake compares with previous versions of make.
+
+ LIMITS Limitations of dmake.
+
+ PORTABILITY Comments on writing portable makefiles.
+
+ FILES Files used by dmake.
+
+ SEE ALSO Other related programs, and man pages.
+
+ AUTHOR The guy responsible for this thing.
+
+ BUGS Hope not.
+
+STARTUP
+ When dmake begins execution it first processes the command line and
+ then processes an initial startup-makefile. This is followed by an
+ attempt to locate and process a user supplied makefile. The startup
+ file defines the default values of all required control macros and the
+ set of default rules for making targets and inferences. When searching
+ for the startup makefile, dmake searches the following locations, in
+ the order specified, until a startup file is located:
+
+
+ 1. The location given as the value of the macro MAKESTARTUP
+ defined on the command line.
+
+ 2. The location given as the value of the environment vari-
+ able MAKESTARTUP defined in the current environment.
+
+ 3. The location given as the value of the macro MAKESTARTUP
+ defined internally within dmake. In this version, the
+ internal definition of MAKESTARTUP is "$(DMAKE-
+ ROOT)/startup.mk", so you can set the environment vari-
+ able DMAKEROOT to the location of your startup directory.
+
+ If DMAKEROOT is not changed, for native Windows dmake
+ versions its value defaults to "$(ABSMAKECMD:d)startup"
+ (see definition of ABSMAKECMD for details). For unix
+ like versions build with the autotools build system it
+ defaults to the value of "${prefix}/share/startup" at
+ build time. The actual value, usually something like
+ /usr/local/share/startup can be checked with the -V com-
+ mand line switch.
+
+ The above search is disabled by specifying the -r option on the command
+ line. An error is issued if a startup makefile cannot be found and the
+ -r option was not specified. A user may substitute a custom startup
+ file by defining the MAKESTARTUP environment variable or by redefining
+ the MAKESTARTUP macro on the command line. To determine where dmake
+ looks for the default startup file, check your environment or issue the
+
+
+
+Dmake Version 4.12 2008-02-26 6
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ command "dmake -V".
+
+ A similar search is performed to locate a default user makefile when no
+ -f command line option is specified. By default, the prerequisite list
+ of the special target .MAKEFILES specifies the names of possible make-
+ files and the search order that dmake should use to determine if one
+ exists. A typical definition for this target is:
+
+ .MAKEFILES : makefile.mk Makefile makefile
+
+ dmake will first look for makefile.mk and then the others. If a pre-
+ requisite cannot be found dmake will try to make it before going on to
+ the next prerequisite. For example, makefile.mk can be checked out of
+ an RCS file if the proper rules for doing so are defined in the startup
+ file.
+
+ If the first line of the user makefile is of the form:
+
+ #!command command_args
+
+ then dmake will expand and run the command prior to reading any addi-
+ tional input. If the return code of the command is zero then dmake
+ will continue on to process the remainder of the user makefile, if the
+ return code is non-zero then dmake will exit.
+
+ dmake builds the internal dependency graph as it parses a user speci-
+ fied makefile. The graph is rooted at the special target .ROOT. .ROOT
+ is the top level target that dmake builds when it starts to build tar-
+ gets. All user specified targets (those from the command line or taken
+ as defaults from the makefile) are made prerequisites of the special
+ target .TARGETS. dmake by default creates the relationship that .ROOT
+ depends on .TARGETS and as a result everything is made. This approach
+ allows the user to customize, within their makefile, the order and
+ which, target, is built first. For example the default makefiles come
+ with settings for .ROOT that specify:
+
+ .ROOT .PHONY .NOSTATE .SEQUENTIAL : .INIT .TARGETS .DONE
+
+ with .INIT and .DONE defined as:
+
+ .INIT .DONE .PHONY:;
+
+ which nicely emulates the behaviour of Sun's make extensions. The
+ building of .ROOT's prerequisites is always forced to be sequential.
+ However, this definition is trivially changed by supplying the defini-
+ tion:
+
+ .ROOT : .TARGETS
+
+ which skips the preamble and postamble phases of building .TARGETS.
+
+ Please note that even though .INIT and .DONE are special exceptions,
+ see section SPECIAL TARGETS, the use of self defined targets starting
+ with `.' should be avoided as they would be handled as .<suffix> meta
+ targets. The target names _INIT and _DONE for example would work
+ equally well without the .<suffix> drawback.
+
+
+
+Dmake Version 4.12 2008-02-26 7
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+SYNTAX
+ This section is a summary of the syntax of makefile statements. The
+ description is given in a style similar to BNF, where { } enclose items
+ that may appear zero or more times, and [ ] enclose items that are
+ optional. Alternative productions for a left hand side are indicated
+ by '->', and newlines are significant. All symbols in bold type are
+ text or names representing text supplied by the user.
+
+
+
+
+ Makefile -> { Statement }
+
+
+ Statement -> Macro-Definition
+ -> Conditional-Macro-Definition
+ -> Conditional
+ -> Rule-Definition
+ -> Attribute-Definition
+
+
+ Macro-Definition -> MACRO = LINE
+ -> MACRO [!]*= LINE
+ -> MACRO [!]:= LINE
+ -> MACRO [!]*:= LINE
+ -> MACRO [!]+= LINE
+ -> MACRO [!]+:= LINE
+
+
+ Conditional-Macro-Definition -> TARGET ?= Macro-Definition
+
+
+ Conditional -> .IF expression
+ Makefile
+ [ .ELIF expression
+ Makefile ]
+ [ .ELSE
+ Makefile ]
+ .END
+
+
+ expression -> LINE
+ -> STRING
+ -> expression == expression
+ -> expression != expression
+ -> expression <= expression
+ -> expression >= expression
+ -> ( expression )
+ -> expression || expression
+ -> expression && expression
+
+
+ Rule-Definition -> target-definition
+ [ recipe ]
+
+ target-definition -> targets [attrs] op { PREREQUISITE } [; rcp-line]
+
+
+
+Dmake Version 4.12 2008-02-26 8
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ targets -> target { targets }
+ -> "target" { targets }
+
+
+ target -> special-target
+ -> TARGET
+
+
+ attrs -> attribute { attrs }
+ -> "attribute" { attrs }
+
+
+ op -> : { modifier }
+
+
+ modifier -> :
+ -> ^
+ -> !
+ -> -
+ -> |
+
+
+ recipe -> { TAB rcp-line }
+ -> [@[@]][%][-] [
+ { LINE }
+ ]
+
+
+ rcp-line -> [@[@]][%][-][+] LINE
+
+
+ Attribute-Definition -> attrs : targets
+
+
+ attribute -> .EPILOG
+ -> .ERRREMOVE
+ -> .EXECUTE
+ -> .GROUP
+ -> .IGNORE
+ -> .IGNOREGROUP
+ -> .LIBRARY
+ -> .MKSARGS
+ -> .NOINFER
+ -> .NOSTATE
+ -> .PHONY
+ -> .PRECIOUS
+ -> .PROLOG
+ -> .SETDIR=path
+ -> .SILENT
+ -> .SEQUENTIAL
+ -> .SWAP
+ -> .USESHELL
+ -> .SYMBOL
+ -> .UPDATEALL
+ -> .WINPATH
+
+
+
+
+Dmake Version 4.12 2008-02-26 9
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ special-target -> .ERROR
+ -> .EXIT
+ -> .EXPORT
+ -> .GROUPEPILOG
+ -> .GROUPPROLOG
+ -> .IMPORT
+ -> .INCLUDE
+ -> .INCLUDEDIRS
+ -> .MAKEFILES
+ -> .REMOVE
+ -> .ROOT
+ -> .SOURCE
+ -> .SOURCE.suffix
+ -> .SUFFIXES (deprecated)
+ -> .TARGETS
+ -> .INIT
+ -> .DONE
+ -> .suffix
+ -> .suffix1.suffix2
+
+
+ Where, TAB represents a <tab> character, STRING represents an arbitrary
+ sequence of characters, and LINE represents a possibly empty sequence
+ of characters terminated by a non-escaped (not immediately preceded by
+ a backslash '\') new-line character. MACRO, PREREQUISITE, and TARGET
+ each represent a string of characters not including space or tab which
+ respectively form the name of a macro, prerequisite or target. The
+ name may itself be a macro expansion expression. A LINE can be contin-
+ ued over several physical lines by terminating it with a single back-
+ slash character. Comments are initiated by the pound # character and
+ extend to the end of line. All comment text is discarded, a '#' may be
+ placed into the makefile text by escaping it with '\' (ie. \# trans-
+ lates to # when it is parsed). An exception to this occurs when a # is
+ seen inside a recipe line that begins with a <tab> or is inside a group
+ recipe. If you specify the -c command line switch then this behavior
+ is disabled and dmake will treat all # characters as start of comment
+ indicators unless they are escaped by \. A set of continued lines may
+ be commented out by placing a single # at the start of the first line.
+ A continued line cannot span more than one makefile.
+
+ white space is defined to be any combination of <space>, <tab>, and the
+ sequence \<nl> when \<nl> is used to terminate a LINE. Note the special
+ treatment of \<nl> in macro definion and recipe lines below. When pro-
+ cessing macro definition lines, any amount of white space is allowed on
+ either side of the macro operator and white space is stripped from both
+ before and after the macro value string. A \<nl> sequence in a macro
+ definition is deleted from the macro value before assigning this value.
+ During recipe expansion the sequence \<nl> is treated as white space
+ but is deleted from the final recipe string. You must escape the \<nl>
+ with another \ in order to get a \ at the end of a recipe or macro def-
+ inition line.
+
+ When processing target definition lines, the recipe for a target must,
+ in general, follow the first definition of the target (See the RULES
+ AND TARGETS section for an exception), and the recipe may not span
+ across multiple makefiles. Any targets and prerequisites found on a
+
+
+
+Dmake Version 4.12 2008-02-26 10
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ target definition line are taken to be white space separated tokens.
+ The rule operator (op in SYNTAX section) is also considered to be a
+ token but does not require white space to precede or follow it. Since
+ the rule operator begins with a `:', traditional versions of make do
+ not allow the `:' character to form a valid target name. dmake allows
+ `:' to be present in target/prerequisite names as long as the entire
+ target/prerequisite name is quoted. For example:
+
+ a:fred : test
+
+ would be parsed as TARGET = a, PREREQUISITES={fred, :, test}, which is
+ not what was intended. To fix this you must write:
+
+ "a:fred" : test
+
+ Which will be parsed as expected. Quoted target and prerequisite spec-
+ ifications may also contain white space thereby allowing the use of
+ complex function macro expressions.. See the EXAMPLES section for how
+ to apply " quoting to a list of targets.
+
+ATTRIBUTES
+ dmake defines several target attributes. Attributes may be assigned to
+ a single target, a group of targets, or to all targets in the makefile.
+ Attributes are used to modify dmake actions during target update. The
+ recognized attributes are:
+
+
+ .EPILOG Insert shell epilog code when executing a group recipe
+ associated with any target having this attribute set.
+
+ .ERRREMOVE Always remove any target having this attribute if an error
+ is encountered while making them. Setting this attribute
+ overrides the .PRECIOUS attribute.
+
+ .EXECUTE If the -n flag was given then execute the recipe associated
+ with any target having this attribute set.
+
+ .FIRST Used in conjunction with .INCLUDE. Terminates the inclu-
+ sion with the first successfully included prerequisite.
+
+ .GROUP Force execution of a target's recipe as a group recipe.
+
+ .IGNORE Ignore an error when trying to make any target with this
+ attribute set.
+
+ .IGNOREGROUP
+ Disable the special meaning of '[' to initiate a group
+ recipe.
+
+ .LIBRARY Target is a library.
+
+ .MKSARGS If running in an MSDOS environment then use MKS extended
+ argument passing conventions to pass arguments to commands.
+ Non-MSDOS environments ignore this attribute.
+
+ .NOINFER Any target with this attribute set will not be subjected to
+ transitive closure if it is inferred as a prerequisite of a
+
+
+
+Dmake Version 4.12 2008-02-26 11
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ target whose recipe and prerequisites are being inferred.
+ (i.e. the inference algorithm will not use any prerequisite
+ with this attribute set, as a target) If specified as
+ '.NOINFER:' (ie. with no prerequisites or targets) then the
+ effect is equivalent to specifying -T on the command line.
+
+ .NOSTATE Any target with this attribute set will not have command
+ line flag information stored in the state file if
+ .KEEP_STATE has been enabled.
+
+ .PHONY Any target with this attribute set will have its recipe
+ executed each time the target is made even if a file match-
+ ing the target name can be located. Any targets that have
+ a .PHONY attributed target as a prerequisite will be made
+ each time the .PHONY attributed prerequisite is made.
+
+ .PRECIOUS Do not remove associated target under any circumstances.
+ Set by default for any targets whose corresponding files
+ exist in the file system prior to the execution of dmake.
+
+ .PROLOG Insert shell prolog code when executing a group recipe
+ associated with any target having this attribute set.
+
+ .SEQUENTIAL Force a sequential make of the associated target's prereq-
+ uisites. If set as a global attribute this implies setting
+ MAXPROCESS=1.
+
+ .SETDIR Change current working directory to specified directory
+ when making the associated target. You must specify the
+ directory at the time the attribute is specified. To do
+ this simply give .SETDIR=path as the attribute. path is
+ expanded and the result is used as the value of the direc-
+ tory to change to. If path contains $$@ then the name of
+ the target to be built is used in computing the path to
+ change directory to. If path is surrounded by single
+ quotes then path is not expanded, and is used literally as
+ the directory name. If the path contains any `:' charac-
+ ters then the entire attribute string must be quoted using
+ ". If a target having this attribute set also has the
+ .IGNORE attribute set then if the change to the specified
+ directory fails it will be ignored, and no error message
+ will be issued.
+
+ .SILENT Do not echo the recipe lines when making any target with
+ this attribute set, and do not issue any warnings.
+
+ .SWAP Under MSDOS when making a target with this attribute set
+ swap the dmake executable to disk prior to executing the
+ recipe line. Also see the '%' recipe line flag defined in
+ the RECIPES section.
+
+ .SYMBOL Target is a library member and is an entry point into a
+ module in the library. This attribute is used only when
+ searching a library for a target. Targets of the form
+ lib((entry)) have this attribute set automatically.
+
+ .USESHELL Force each recipe line of a target to be executed using a
+ shell. Specifying this attribute is equivalent to
+
+
+
+Dmake Version 4.12 2008-02-26 12
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ specifying the '+' character at the start of each line of a
+ non-group recipe.
+
+ .UPDATEALL Indicates that all the targets listed in this rule are
+ updated by the execution of the accompanying recipe. A
+ common example is the production of the y.tab.c and y.tab.h
+ files by yacc when it is run on a grammar. Specifying
+ .UPDATEALL in such a rule prevents the running of yacc
+ twice, once for the y.tab.c file and once for the y.tab.h
+ file. .UPDATEALL targets that are specified in a single
+ rule are treated as a single target and all timestamps are
+ updated whenever any target in the set is made. As a side-
+ effect, dmake internally sorts such targets in ascending
+ alphabetical order and the value of $@ is always the first
+ target in the sorted set.
+
+ .WINPATH Switch between default (POSIX) and Windows style path rep-
+ resentation. (This attribute is specific for cygwin dmake
+ executables and non-cygwin environments ignore this
+ attribute.)
+
+ Under Cygwin it can be useful to generate Windows style
+ paths (with regular slashes) instead of the default cygwin
+ style (POSIX) paths for dmake's dynamic macros. The
+ affected macros are $@, $*, $>, $?, $<, $&, $^ and
+ $(MAKEDIR), $(PWD), $(TMD), $(TMPFILE) and the $(mktmp ...)
+ function macro. This feature can be used to create DOS
+ style path parameters for native W32 programs from dynamic
+ macros.
+
+ Note that the Windows style paths use regular slashes ('/')
+ instead of the usual Windows backslash ('\') as directory
+ separator to avoid quoting problems (after all it is still
+ a cygwin dmake!) and cygwin, as well as native Windows,
+ programs should have no problems using this (c:/foo/bar)
+ path representation.
+
+ Example: Assuming the current target to be /tmp/mytarget
+ the $@ macro without .WINPATH active expands to:
+
+ /tmp/mytarget
+
+ With .WINPATH set it expands to:
+
+ C:/cygwin/tmp/mytarget
+
+ All attributes are user setable and except for .UPDATEALL and .MKSARGS
+ may be used in one of two forms. The .MKSARGS attribute is restricted
+ to use as a global attribute, and the use of the .UPDATEALL attribute
+ is restricted to rules of the second form only.
+
+ ATTRIBUTE_LIST : targets
+
+ assigns the attributes specified by ATTRIBUTE_LIST to each target in
+ targets or
+
+ targets ATTRIBUTE_LIST : ...
+
+
+
+
+Dmake Version 4.12 2008-02-26 13
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ assigns the attributes specified by ATTRIBUTE_LIST to each target in
+ targets. In the first form if targets is empty (ie. a NULL list), then
+ the list of attributes will apply to all targets in the makefile (this
+ is equivalent to the common Make construct of ".IGNORE :" but has been
+ modified to the notion of an attribute instead of a special target).
+ Not all of the attributes have global meaning. In particular,
+ .LIBRARY, .NOSTATE, .PHONY, .SETDIR, .SYMBOL and .UPDATEALL have no
+ assigned global meaning.
+
+ Any attribute may be used with any target, even with the special tar-
+ gets. Some combinations are useless (e.g. .INCLUDE .PRECIOUS: ... ),
+ while others are useful (e.g. .INCLUDE .IGNORE : "file.mk" will not
+ complain if file.mk cannot be found using the include file search
+ rules, see the section on SPECIAL TARGETS for a description of
+ .INCLUDE). If a specified attribute will not be used with the special
+ target a warning is issued and the attribute is ignored.
+
+MACROS
+ dmake supports six forms of macro assignment.
+
+
+ MACRO = LINE This is the most common and familiar form of macro
+ assignment. It assigns LINE literally as the value of
+ MACRO. Future expansions of MACRO recursively expand
+ its value.
+
+ MACRO *= LINE This form behaves exactly as the simple '=' form with
+ the exception that if MACRO already has a value then
+ the assignment is not performed.
+
+ MACRO := LINE This form differs from the simple '=' form in that it
+ expands LINE prior to assigning it as the value of
+ MACRO. Future expansions of MACRO do not recursively
+ expand its value.
+
+ MACRO *:= LINE This form behaves exactly as the ':=' form with the
+ exception that if MACRO already has a value then the
+ assignment and expansion are not performed.
+
+ MACRO += LINE This form of macro assignment allows macro values to
+ grow. It takes the literal value of LINE and appends
+ it to the previous value of MACRO separating the two by
+ a single space. Future expansions of MACRO recursively
+ expand its value.
+
+ MACRO +:= LINE This form is similar to the '+=' form except that the
+ value of LINE is expanded prior to being added to the
+ value of MACRO.
+
+ Macro expressions specified on the command line allow the macro value
+ to be redefined within the makefile only if the macro is defined using
+ the '+=' and '+:=' operators. Other operators will define a macro that
+ cannot be further modified.
+
+ Each of the preceeding macro assignment operators may be prefixed by !
+ to indicate that the assignment should be forced and that no warnings
+ should be issued. Thus, specifying ! has the effect of silently forc-
+ ing the specified macro assignment.
+
+
+
+Dmake Version 4.12 2008-02-26 14
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ When dmake defines a non-environment macro it strips leading and trail-
+ ing white space from the macro value. Macros imported from the envi-
+ ronment via either the .IMPORT special target (see the SPECIAL TARGETS
+ section), or the -e, or -E flags are an exception to this rule. Their
+ values are always taken literally and white space is never stripped.
+ In addition, named macros defined using the .IMPORT special target do
+ not have their values expanded when they are used within a makefile.
+ In contrast, environment macros that are imported due to the specifica-
+ tion of the -e or -E flags are subject to expansion when used.
+
+ To specify a macro expansion enclose the name in () or {} and precede
+ it with a dollar sign $. Thus $(TEST) represents an expansion of the
+ macro variable named TEST. If TEST is defined then $(TEST) is replaced
+ by its expanded value. If TEST is not defined then $(TEST) expands to
+ the NULL string (this is equivalent to defining a macro as 'TEST=' ).
+ A short form may be used for single character named macros. In this
+ case the parentheses are optional, and $(I) is equivalent to $I. Macro
+ expansion is recursive, hence, if the value string contains an expres-
+ sion representing a macro expansion, the expansion is performed. Cir-
+ cular macro expansions are detected and cause an error to be issued.
+
+ When defining a macro the given macro name is first expanded before
+ being used to define the macro. Thus it is possible to define macros
+ whose names depend on values of other macros. For example, suppose CWD
+ is defined as
+
+ CWD = $(PWD:b)
+
+ then the value of $(CWD) is the name of the current directory. This
+ can be used to define macros specific to this directory, for example:
+
+ _$(CWD).prt = list of files to print...
+
+ The actual name of the defined macro is a function of the current
+ directory. A construct such as this is useful when processing a hier-
+ archy of directories using .SETDIR attributed targets and a collection
+ of small distributed makefile stubs.
+
+ Macro variables may be defined within the makefile, on the command
+ line, or imported from the environment.
+
+ dmake supports several non-standard macro expansions: The first is of
+ the form:
+
+ $(macro_name:modifier_list:modifier_list:...)
+
+ where modifier_list may be a combination of:
+
+ b or B - file (not including suffix) portion of path names
+ d or D - directory portion of all path names
+ e or E - suffix portion of path names
+ f or F - file (including suffix) portion of path names
+ i or I - inferred names of targets
+ n or N - normalized path names
+ l or L - macro value in lower case
+ u or U - macro value in upper case
+ 1 - return the first white space separated token from value
+
+
+
+
+Dmake Version 4.12 2008-02-26 15
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ or a single one of:
+
+ m or M - map escape codes found in macro to their ASCII value
+ s or S - simple pattern substitution
+ t or T - tokenization.
+ ^ - prepend a prefix to each token
+ + - append a suffix to each token
+
+ Thus if we have the example:
+ test = d1/d2/d3/a.out f.out d1/k.out
+ The following macro expansions produce the values on the right of '->'
+ after expansion.
+
+ $(test:d) -> d1/d2/d3/ d1/
+ $(test:b) -> a f k
+ $(test:f) -> a.out f.out k.out
+ ${test:db} -> d1/d2/d3/a f d1/k
+ ${test:s/out/in/:f} -> a.in f.in k.in
+ $(test:f:t"+") -> a.out+f.out+k.out
+ $(test:e) -> .out .out .out
+ $(test:u) -> D1/D2/D3/A.OUT F.OUT D1/K.OUT
+ $(test:1) -> d1/d2/d3/a.out
+
+ For this macro
+ test = d1/d2/../a.out "d1/file name.ext"
+ the following results are returned:
+
+ $(test:n) -> d1/a.out "d1/file name.ext"
+
+ If a token ends in a string composed from the value of the macro
+ DIRBRKSTR (ie. ends in a directory separator string, e.g. '/' in UNIX)
+ and you use the :d modifier then the expansion returns the directory
+ name less the final directory separator string. Thus successive pairs
+ of :d modifiers each remove a level of directory in the token string.
+
+ The infered names of targets :i modifier returnes the actual filename
+ associated to the target, see BINDING TARGETS. If the value is not a
+ target or prerequisite the value is returned unchanged. For the follow-
+ ing example:
+ test = aprog bprog
+ If aprog and bprog are targets or prerequisits and they are bound to
+ /tmp/aprog and bprog (see .SOURCE special target) the macro expansion
+ has the following effect:
+
+ $(test:i) -> /tmp/aprog bprog
+
+ The normalized path names :n modifier honors the setting of .WINPATH to
+ determine the output format of the result.
+
+ The map escape codes modifier changes the following escape codes \a =>
+ <bel>, \b => <backspace>, \f => <formfeed>, \n => <nl>, \r => <cr>, \t
+ => <tab>, \v => <vertical tab>, \" => ", and \xxx => <xxx> where xxx is
+ the octal representation of a character into the corresponding ASCII
+ value.
+
+ The tokenization, prepend and append modifier may use the same escape
+ codes that are supported by the map escape codes modifier in the string
+ that is inserted, prepended or added by the respective macro modifier.
+
+
+
+Dmake Version 4.12 2008-02-26 16
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ These modifiers may quote this string to include otherwise problematic
+ characters. E.g. spaces, colons and parentheses.
+
+ The tokenization modifier takes all white space separated tokens from
+ the macro value and separates them by the separator string. Thus the
+ expansion:
+
+ $(test:f:t"+\n")
+ produces:
+ a.out+
+ f.out+
+ k.out
+
+ The prefix operator ^ takes all white space separated tokens from the
+ macro value and prepends string to each.
+
+ $(test:f:^mydir/)
+ produces:
+ mydir/a.out mydir/f.out mydir/k.out
+
+ The suffix operator + takes all white space separated tokens from the
+ macro value and appends string to each.
+
+ $(test:b:+.c)
+ produces:
+ a.c f.c k.c
+
+ The next non-standard form of macro expansion allows for recursive
+ macros. It is possible to specify a $(macro_name) or ${macro_name}
+ expansion where macro_name contains more $( ... ) or ${ ... } macro
+ expansions itself.
+
+ For example $(CC$(_HOST)$(_COMPILER)) will first expand
+ CC$(_HOST)$(_COMPILER) to get a result and use that result as the name
+ of the macro to expand. This is useful for writing a makefile for more
+ than one target environment. As an example consider the following
+ hypothetical case. Suppose that _HOST and _COMPILER are imported from
+ the environment and are set to represent the host machine type and the
+ host compiler respectively.
+
+ CFLAGS_VAX_CC = -c -O # _HOST == "_VAX", _COMPILER == "_CC"
+ CFLAGS_PC_MSC = -c -ML # _HOST == "_PC", _COMPILER == "_MSC"
+
+ # redefine CFLAGS macro as:
+
+ CFLAGS := $(CFLAGS$(_HOST)$(_COMPILER))
+
+ This causes CFLAGS to take on a value that corresponds to the environ-
+ ment in which the make is being invoked.
+
+ The final non-standard macro expansion is of the form:
+
+ string1{token_list}string2
+
+ where string1, string2 and token_list are expanded. After expansion,
+ string1 is prepended to each token found in token_list and string2 is
+ appended to each resulting token from the previous prepend. string1
+ and string2 are not delimited by white space whereas the tokens in
+
+
+
+Dmake Version 4.12 2008-02-26 17
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ token_list are. A null token in the token list is specified using "".
+ Thus using another example we have:
+
+ test/{f1 f2}.o --> test/f1.o test/f2.o
+ test/ {f1 f2}.o --> test/ f1.o f2.o
+ test/{f1 f2} .o --> test/f1 test/f2 .o
+ test/{"f1" ""}.o --> test/f1.o test/.o
+
+ and
+
+ test/{d1 d2}/{f1 f2}.o --> test/d1/f1.o test/d1/f2.o
+ test/d2/f1.o test/d2/f2.o
+
+ This last expansion is activated only when the first characters of
+ token_list appear immediately after the opening '{' with no intervening
+ white space. The reason for this restriction is the following incom-
+ patibility with Bourne Shell recipes. The line
+
+ { echo hello;}
+
+ is valid /bin/sh syntax; while
+
+ {echo hello;}
+
+ is not. Hence the latter triggers the enhanced macro expansion while
+ the former causes it to be suppressed. See the SPECIAL MACROS section
+ for a description of the special macros that dmake defines and under-
+ stands.
+
+RULES AND TARGETS
+ A makefile contains a series of entries that specify dependencies.
+ Such entries are called target/prerequisite or rule definitions. Each
+ rule definition is optionally followed by a set of lines that provide a
+ recipe for updating any targets defined by the rule. Whenever dmake
+ attempts to bring a target up to date and an explicit recipe is pro-
+ vided with a rule defining the target, that recipe is used to update
+ the target. A rule definition begins with a line having the following
+ syntax:
+
+ <targets> [<attributes>] <ruleop> [<prerequisites>] [;<recipe>]
+
+ targets is a non-empty list of targets. If the target is a special
+ target (see SPECIAL TARGETS section below) then it must appear alone on
+ the rule line. For example:
+
+ .IMPORT .ERROR : ...
+
+ is not allowed since both .IMPORT and .ERROR are special targets. Spe-
+ cial targets are not used in the construction of the dependency graph
+ and will not be made.
+
+ attributes is a possibly empty list of attributes. Any attribute
+ defined in the ATTRIBUTES section above may be specified. All
+ attributes will be applied to the list of named targets in the rule
+ definition. No other targets will be affected.
+
+
+ NOTE: As stated earlier, if both the target list and prerequisite
+ list are empty but the attributes list is not, then the
+
+
+
+Dmake Version 4.12 2008-02-26 18
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ specified attributes affect all targets in the makefile.
+
+
+ ruleop is a separator which is used to identify the targets from the
+ prerequisites. Optionally it also provides a facility for modifying
+ the way in which dmake handles the making of the associated targets.
+ In its simplest form the operator is a single ':', and need not be sep-
+ arated by white space from its neighboring tokens. It may additionally
+ be followed by any of the modifiers { !, ^, -, :, | }, where:
+
+
+ ! says execute the recipe for the associated targets once for each
+ out of date prerequisite. (The meaning of the runtime macro $?
+ is changed, see below in the RUNTIME MACROS section.) Ordinarily
+ the recipe is executed once for all out of date prerequisites at
+ the same time.
+
+ ^ says to insert the specified prerequisites, if any, before any
+ other prerequisites already associated with the specified tar-
+ gets. In general, it is not useful to specify ^ with an empty
+ list of prerequisites.
+
+ - says to clear the previous list of prerequisites before adding
+ the new prerequisites. Thus,
+
+ foo :
+ foo : bar baz
+
+ can be replaced by
+
+ foo :- bar baz
+
+ however the old form still works as expected.
+
+ : When the rule operator is not modified by a second ':' only one
+ set of rules may be specified for making a target. Multiple
+ definitions may be used to add to the list of prerequisites that
+ a target depends on. However, if a target is multiply defined
+ only one definition may specify a recipe for making the target.
+
+ When a target's rule operator is modified by a second ':' (::
+ for example) then this definition may not be the only definition
+ with a recipe for the target. There may be other :: target def-
+ inition lines that specify a different set of prerequisites with
+ a different recipe for updating the target. Any such target is
+ made if any of the definitions find it to be out of date with
+ respect to the related prerequisites and the corresponding
+ recipe is used to update the target. By definition all '::'
+ recipes that are found to be out of date for are executed.
+
+ In the following simple example, each rule has a `::' ruleop.
+ In such an operator we call the first `:' the operator, and the
+ second `:' the modifier.
+
+ a.o :: a.c b.h
+ first recipe for making a.o
+
+ a.o :: a.y b.h
+ second recipe for making a.o
+
+
+
+Dmake Version 4.12 2008-02-26 19
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ If a.o is found to be out of date with respect to a.c then the
+ first recipe is used to make a.o. If it is found out of date
+ with respect to a.y then the second recipe is used. If a.o is
+ out of date with respect to b.h then both recipes are invoked to
+ make a.o. In the last case the order of invocation corresponds
+ to the order in which the rule definitions appear in the make-
+ file.
+
+ | Is defined only for PERCENT rule target definitions. When spec-
+ ified it indicates that the following construct should be parsed
+ using the old semantinc meaning:
+
+ %.o :| %.c %.r %.f ; some rule
+
+ is equivalent to:
+
+ %.o : %.c ; some rule
+ %.o : %.r ; some rule
+ %.o : %.f ; some rule
+
+ Targets defined using a single `:' operator with a recipe may be rede-
+ fined again with a new recipe by using a `:' operator with a `:' modi-
+ fier. This is equivalent to a target having been initially defined
+ with a rule using a `:' modifier. Once a target is defined using a `:'
+ modifier it may not be defined again with a recipe using only the `:'
+ operator with no `:' modifier. In both cases the use of a `:' modifier
+ creates a new list of prerequisites and makes it the current prerequi-
+ site list for the target. The `:' operator with no recipe always modi-
+ fies the current list of prerequisites. Thus assuming each of the fol-
+ lowing definitions has a recipe attached, then:
+
+ joe : fred ... (1)
+ joe :: more ... (2)
+
+ and
+
+ joe :: fred ... (3)
+ joe :: more ... (4)
+
+ are legal and mean: add the recipe associated with (2), or (4) to the
+ set of recipes for joe, placing them after existing recipes for making
+ joe. The constructs:
+
+ joe :: fred ... (5)
+ joe : more ... (6)
+
+ and
+
+ joe : fred ... (7)
+ joe : more ... (8)
+
+ are errors since we have two sets of perfectly good recipes for making
+ the target.
+
+ prerequisites is a possibly empty list of targets that must be brought
+ up to date before making the current target.
+
+ recipe is a short form and allows the user to specify short rule defi-
+ nitions on a single line. It is taken to be the first recipe line in a
+
+
+
+Dmake Version 4.12 2008-02-26 20
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ larger recipe if additional lines follow the rule definition. If the
+ semi-colon is present but the recipe line is empty (ie. null string)
+ then it is taken to be an empty rule. Any target so defined causes
+ target to be treated as a virtual target, see VIRTUAL TARGETS below.
+
+RECIPES
+ The traditional format used by most versions of Make defines the recipe
+ lines as arbitrary strings that may contain macro expansions. They
+ follow a rule definition line and may be spaced apart by comment or
+ blank lines. The list of recipe lines defining the recipe is termi-
+ nated by a new target definition, a macro definition, or end-of-file.
+ Each recipe line MUST begin with a <TAB> character (or spaces, see
+ .NOTABS) which may optionally be followed with one or all the following
+ recipe property characters '@%+-' which affect the recipe execution:
+
+ '-' indicates that non-zero exit values (ie. errors) are to be
+ ignored when this recipe line is executed.
+
+ '+' indicates that the current recipe line is to be executed using
+ the shell. Group recipes implicitely ignore this property.
+
+ '%' indicates that dmake should swap itself out to secondary storage
+ (MSDOS only) before running the recipe.
+
+ '@' indicates that the recipe line should NOT be echoed to the ter-
+ minal prior to being executed.
+
+ '@@' is a stronger version of the previous property. The recipe line
+ and the output (stdout and stderr) of the executed recipe are
+ NOT shown on the terminal.
+
+ Each property is off by default (ie. by default, errors are signifi-
+ cant, commands are echoed, no swapping is done and a shell is used only
+ if the recipe line contains a character found in the value of the
+ SHELLMETAS macro). Global settings activated via command line options
+ or special attribute or target names may also affect these settings.
+ An example recipe:
+
+ target :
+ first recipe line
+ second recipe line, executed independent of first.
+ @a recipe line that is not echoed
+ -and one that has errors ignored
+ %and one that causes dmake to swap out
+ +and one that is executed using a shell.
+
+ The second and new format of the recipe block begins the block with the
+ character '[' (the open group character) in the last non-white space
+ position of a line, and terminates the block with the character ']'
+ (the close group character) in the first non-white space position of a
+ line. In this form each recipe line need not have a leading TAB. This
+ is called a recipe group. Groups so defined are fed intact as a single
+ unit to a shell for execution whenever the corresponding target needs
+ to be updated. If the open group character '[' is preceded by one or
+ all of the recipe properties (-, %, @ and @@) then they apply to the
+ entire group in the same way that they apply to single recipe lines.
+ You may also specify '+' but it is redundant as a shell is already
+ being used to run the recipe. See the MAKING TARGETS section for a
+ description of how dmake invokes recipes. Here is an example of a
+
+
+
+Dmake Version 4.12 2008-02-26 21
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ group recipe:
+
+ target :
+ [
+ first recipe line
+ second recipe line
+ tall of these recipe lines are fed to a
+ single copy of a shell for execution.
+ ]
+
+
+BUILTIN COMMANDS
+ dmake supports some builtin commands. An optional leading '+' describes
+ that the builtin can be used also when being executed in a shell other-
+ wise it is only implemented when used directly. Remember that if a
+ character of the recipe is found in the SHELLMETAS macro the execution
+ of the recipe in a shell is forced.
+
+ [+]noop [something]
+ The noop internal command always returns success if used but it
+ is not executed even though the rest of the commandline is eval-
+ uated. This command can be used to evaluate macro expansions at
+ the runtime of the recipe without starting a real commmand.
+
+ [+]<empty recipe>
+ If an empty recipe line is encountered it is not executed. This
+ sounds more trivial than it really is because the recipe could
+ consist of macros that evaluated to empty or whitespace only
+ strings.
+
+ echo [-n] data
+ This internal command prints data (with all leading whitespace
+ removed, but otherwise literally) to stdout. If the '-n' switch
+ is given no trailing newline is printed. Note that no quoting is
+ removed nor that escape sequences are handled.
+
+ No special treatment of buildin commands for group recipes is imple-
+ mented even though the <empty recipe> will most propably also not be
+ evaluated by most shells that can be used to handle the recipe groups.
+
+TEXT DIVERSIONS
+ dmake supports the notion of text diversions. If a recipe line con-
+ tains the macro expression
+
+ $(mktmp[,[file][,text]] data)
+
+ then all text contained in the data expression is expanded and is writ-
+ ten to a temporary file. The data in the file will always be termi-
+ nated from a new line character. The file parameter can be used to
+ override the name of the temporary file. If its expanded value is not
+ empty it will be used instead of the unique and thread safe file name
+ that otherwise would be generated internally. The return value of the
+ macro is the name of the temporary file unless the text parameter is
+ defined. In this case the return value is the expanded value of text.
+
+ data can be any text and must be separated from the 'mktmp' portion of
+ the macro name by white-space. The only restriction on the data text
+ is that it must contain a balanced number of parentheses of the same
+ kind as are used to initiate the $(mktmp ...) expression. For example:
+
+
+
+Dmake Version 4.12 2008-02-26 22
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ $(mktmp $(XXX))
+
+ is legal and works as expected, but:
+
+ $(mktmp text (to dump to file)
+
+ is not legal. You can achieve what you wish by either defining a macro
+ that expands to '(' or by using {} in the macro expression; like this:
+
+ ${mktmp text (to dump to file}
+
+ Since the temporary file is opened when the macro containing the text
+ diversion expression is expanded, diversions may be nested and any
+ diversions that are created as part of ':=' macro expansions persist
+ for the duration of the dmake run. If the data text is to contain new
+ lines the map escape codes macro expasion can be used. For example the
+ expression:
+
+ mytext:=this is a\ntest of the text diversion
+ all:
+ cat $(mktmp $(mytext:m))
+
+ is replaced by:
+
+ cat /tmp/mk12294AA
+
+ where the temporary file contains two lines both of which are termi-
+ nated by a new-line. A second more illustrative example generates a
+ response file to an MSDOS link command:
+
+ OBJ = fred.obj mary.obj joe.obj
+ all : $(OBJ)
+ link @$(mktmp $(^:t"+\n"))
+
+ The result of making `all' in the second example is the command:
+
+ link @/tmp/mk02394AA
+
+ where the temporary file contains:
+
+ fred.obj+
+ mary.obj+
+ joe.obj
+
+ The last line of the file is terminated by a new-line which is always
+ inserted at the end of the data string.
+
+ If the optional file specifier is present it can be used to specify the
+ name of the temporary file to create. An example that would be useful
+ for MSDOS users with a Turbo-C compiler
+
+ $(mktmp,turboc.cfg $(CFLAGS))
+
+ will place the contents of CFLAGS into a local turboc.cfg file. The
+ second optional argument, text, if present alters the name of the value
+ returned by the $(mktmp ...) macro.
+
+ Under MS-DOS text diversions may be a problem. Many DOS tools require
+ that path names which contain directories use the \ character to
+
+
+
+Dmake Version 4.12 2008-02-26 23
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ delimit the directories. Some users however wish to use the '/' to
+ delimit pathnames and use environments that allow them to do so. The
+ macro USESHELL is set to "yes" if the current recipe is forced to use a
+ shell via the .USESHELL or '+' directives, otherwise its value is "no".
+ The dmake startup files define the macro DIVFILE whose value is either
+ the value of TMPFILE or the value of TMPFILE edited to replace any '/'
+ characters to the appropriate value based on the current shell and
+ whether it will be used to execute the recipe.
+
+ Previous versions of dmake defined text diversions using <+, +>
+ strings, where <+ started a text diversion and +> terminated one.
+ dmake is backward compatible with this construct only if the <+ and +>
+ appear literally on the same recipe line or in the same macro value
+ string. In such instances the expression:
+
+ <+data+>
+
+ is mapped to:
+
+ $(mktmp data)
+
+ which is fully output compatible with the earlier construct. <+, +>
+ constructs whose text spans multiple lines must be converted by hand to
+ use $(mktmp ...).
+
+ If the environment variable TMPDIR is defined then the temporary file
+ is placed into the directory specified by that variable. A makefile
+ can modify the location of temporary files by defining a macro named
+ TMPDIR and exporting it using the .EXPORT special target.
+
+VIRTUAL TARGETS
+ Dmake allows to define targets with the sole purpose to enforce a
+ dependency chain that are unable to create the target, hence virtual
+ targets. When dmake tries to make a target, but only finds a target
+ definition without recipe lines, it would normally issues a "Don't know
+ how to make ..." error message, but if a target rule is terminated by a
+ semicolon and has no following recipe lines, or if it has no recipe
+ lines, but defines prerequisites, or if the AUGMAKE mode is enabled
+ (see the COMPATIBILITY section for details), the target is treated as a
+ virtual target and the error is suppressed. In addition to this, if the
+ default target does not have recipe lines it is also treated as a vir-
+ tual target.
+
+ Virtual targets should not have a corresponding file therefore they
+ inherit the time of their newest prerequisite if they have prerequi-
+ sites, otherwise they get the current time assigned when being made.
+ If the virtual target has a corresponding file a warning is issued, but
+ the time stamp of that file is taken into account. The virtual target
+ uses the time stamp of the corresponding file if it is newer than the
+ one determined by the previous rule.
+
+SPECIAL TARGETS
+ This section describes the special targets that are recognized by
+ dmake. Some are affected by attributes and others are not.
+
+ .ERROR If defined then the recipe associated with this target is
+ executed whenever an error condition is detected by
+ dmake. All attributes that can be used with any other
+ target may be used with this target. Any prerequisites
+
+
+
+Dmake Version 4.12 2008-02-26 24
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ of this target will be brought up to date during its pro-
+ cessing. NOTE: errors will be ignored while making this
+ target, in extreme cases this may cause some problems.
+
+ .EXIT If this target is encountered while parsing a makefile
+ then the parsing of the makefile is immediately termi-
+ nated at that point.
+
+ .EXPORT All prerequisites associated with this target are assumed
+ to correspond to macro names and they and their values
+ are exported to the environment as environment strings at
+ the point in the makefile at which this target appears.
+ Any attributes specified with this target are ignored.
+ Only macros which have been assigned a value in the make-
+ file prior to the export directive are exported, macros
+ as yet undefined or macros whose value contains any of
+ the characters "+=:*" are not exported.
+
+ Note that macros that are not expanded during the macro
+ assignment and contain other macros will be written into
+ the environment containing these other macros in the form
+ of $(macroname).
+
+ .IMPORT Prerequisite names specified for this target are searched
+ for in the environment and defined as macros with their
+ value taken from the environment. If the special name
+ .EVERYTHING is used as a prerequisite name then all envi-
+ ronment variables defined in the environment are
+ imported. The functionality of the -E flag can be forced
+ by placing the construct .IMPORT : .EVERYTHING at the
+ start of a makefile. Similarly, by placing the construct
+ at the end, one can emulate the effect of the -e command
+ line flag. If a prerequisite name cannot be found in the
+ environment an error message is issued. .IMPORT accepts
+ the .IGNORE attribute. When given, it causes dmake to
+ ignore the above error. See the MACROS section for a
+ description of the processing of imported macro values.
+
+ .INCLUDE Parse another makefile just as if it had been located at
+ the point of the .INCLUDE in the current makefile. The
+ list of prerequisites gives the list of makefiles to try
+ to read. If the list contains multiple makefiles then
+ they are read in order from left to right. The following
+ search rules are used when trying to locate the file. If
+ the filename is surrounded by " or just by itself then it
+ is searched for in the current directory. If it is not
+ found it is then searched for in each of the directories
+ specified as prerequisites of the .INCLUDEDIRS special
+ target. If the file name is surrounded by < and >, (ie.
+ <my_spiffy_new_makefile>) then it is searched for only in
+ the directories given by the .INCLUDEDIRS special target.
+ In both cases if the file name is a fully qualified name
+ starting at the root of the file system then it is only
+ searched for once, and the .INCLUDEDIRS list is ignored.
+ If .INCLUDE fails to find the file it invokes the infer-
+ ence engine to try to infer and hence make the file to be
+ included. In this way the file can be checked out of an
+ RCS repository for example. .INCLUDE accepts the
+ .IGNORE, .SETDIR, and .NOINFER attributes. If the
+
+
+
+Dmake Version 4.12 2008-02-26 25
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ .IGNORE attribute is given and the file cannot be found
+ then dmake continues processing, otherwise an error mes-
+ sage is generated. If the .NOINFER attribute is given
+ and the file cannot be found then dmake will not attempt
+ to infer and make the file. The .SETDIR attribute causes
+ dmake to change directories to the specified directory
+ prior to attempting the include operation. If all fails
+ dmake attempts to make the file to be included. If mak-
+ ing the file fails then dmake terminates unless the
+ .INCLUDE directive also specified the .IGNORE attribute.
+ If .FIRST is specified along with .INCLUDE then dmake
+ attempts to include each named prerequisite and will ter-
+ minate the inclusion with the first prerequisite that
+ results in a successful inclusion.
+
+ .INCLUDEDIRS The list of prerequisites specified for this target
+ defines the set of directories to search when trying to
+ include a makefile.
+
+ .KEEP_STATE This special target is a synonym for the macro definition
+
+ .KEEP_STATE := _state.mk
+
+ It's effect is to turn on STATE keeping and to define
+ _state.mk as the state file.
+
+ .MAKEFILES The list of prerequisites is the set of files to try to
+ read as the default makefile. By default this target is
+ defined as:
+
+ .MAKEFILES : makefile.mk Makefile makefile
+
+
+ .REMOVE The recipe of this target is used whenever dmake needs to
+ remove intermediate targets that were made but do not
+ need to be kept around. Such targets result from the
+ application of transitive closure on the dependency
+ graph.
+
+ .ROOT The internal root of the dependency graph, see section
+ STARTUP for details.
+
+ .SOURCE The prerequisite list of this target defines a set of
+ directories to check when trying to locate a target file
+ name. See the section on BINDING of targets for more
+ information.
+
+ .SOURCE.suff The same as .SOURCE, except that the .SOURCE.suff list is
+ searched first when trying to locate a file matching the
+ a target whose name ends in the suffix .suff.
+
+ .SUFFIXES This deprecated special target has no special meaning.
+ Avoid its use.
+
+ .TARGETS The internal targets that all user defined targets are
+ prerequisites of, see section STARTUP for details.
+
+ There are a few targets that are "slightly" special:
+
+
+
+
+Dmake Version 4.12 2008-02-26 26
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ .INIT
+ .DONE
+
+ These targets exist because of historical reasons, see the usage of
+ .INIT and .DONE in section "STARTUP", they can be used and defined as
+ ordinary targets but are special in the sense that even though they
+ start with a `.' they are not treated as a .<suffix> meta target (See
+ the AUGMAKE META RULES section for details).
+
+ Please note that self defined targets shouldn't use the prefix `.' as
+ they would be handled as .<suffix> meta targets and dmake most propably
+ would complain about this.
+
+ In addition to the special targets above, several other forms of tar-
+ gets are recognized and are considered special, their exact form and
+ use is defined in the sections that follow.
+
+SPECIAL MACROS
+ dmake defines a number of special macros. They are divided into three
+ classes: control macros, run-time macros, and function macros. The
+ control macros are used by dmake to configure its actions, and are the
+ preferred method of doing so. In the case when a control macro has the
+ same function as a special target or attribute they share the same name
+ as the special target or attribute. The run-time macros are defined
+ when dmake makes targets and may be used by the user inside recipes.
+ The function macros provide higher level functions dealing with macro
+ expansion and diversion file processing.
+
+CONTROL MACROS
+ To use the control macros simply assign them a value just like any
+ other macro. The control macros are divided into three groups: string
+ valued macros, character valued macros, and boolean valued macros.
+
+ The following are all of the string valued macros. This list is
+ divided into two groups. The first group gives the string valued
+ macros that are defined internally and cannot be directly set by the
+ user.
+
+ ABSMAKECMD Warning! This macro's value is differently defined for
+ a native Windows dmake executable (compiled with MS
+ Visual C++ or MinGW) and dmake for other operating sys-
+ tems or build with other compilers.
+
+ In the first case its value is the absolute filename of
+ the executable of the current dmake process, otherwise
+ it is defined as the NULL string.
+
+ INCDEPTH This macro's value is a string of digits representing
+ the current depth of makefile inclusion. In the first
+ makefile level this value is zero.
+
+ MFLAGS Is the list of flags that were given on the command
+ line including a leading switch character. The -f flag
+ is not included in this list.
+
+ MAKECMD Is the name with which dmake was invoked.
+
+ MAKEDIR Is the full path to the initial directory in which
+ dmake was invoked.
+
+
+
+Dmake Version 4.12 2008-02-26 27
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ MAKEFILE Contains the string "-f makefile" where, makefile is
+ the name of initial user makefile that was first read.
+
+ MAKEFLAGS Is the same as $(MFLAGS) but has no leading switch
+ character. (ie. MFLAGS = -$(MAKEFLAGS))
+
+ MAKEMACROS Contains the complete list of macro expressions that
+ were specified on the command line.
+
+ MAKETARGETS Contains the name(s) of the target(s), if any, that
+ were specified on the command line.
+
+ MAKEVERSION Contains a string indicating the current dmake version
+ number.
+
+ MAXPROCESSLIMIT Is a numeric string representing the maximum number of
+ processes that dmake can use when making targets using
+ parallel mode.
+
+ NULL Is permanently defined to be the NULL string. This is
+ useful when comparing a conditional expression to an
+ NULL value.
+
+ PWD Is the full path to the current directory in which make
+ is executing.
+
+ SPACECHAR Is permanently defined to contain one space character.
+ This is useful when using space characters in function
+ macros, e.g. subst, that otherwise would get deleted
+ (leading/trailing spaces) or for using spaces in func-
+ tion macro parameters.
+
+ TMPFILE Is set to the name of the most recent temporary file
+ opened by dmake. Temporary files are used for text
+ diversions and for group recipe processing.
+
+ TMD Stands for "To Make Dir", and is the path from the
+ present directory (value of $(PWD)) to the directory
+ that dmake was started up in (value of $(MAKEDIR)). If
+ the present directory is the directory that dmake was
+ started up in TMD will be set to the relative path ".".
+ This allows to create valid paths by prepending
+ $(TMD)$(DIRSEPSTR) to a relative path. This macro is
+ modified when .SETDIR attributes are processed. TMD
+ will usually be a relative path with the following two
+ exceptions. If the relative path would go up until the
+ root directory or if different drive letters (DOS file
+ system) make a relative path impossible the absolute
+ path from MAKEDIR is used.
+
+ USESHELL The value of this macro is set to "yes" if the current
+ recipe is forced to use a shell for its execution via
+ the .USESHELL or '+' directives, its value is "no" oth-
+ erwise.
+
+
+ The second group of string valued macros control dmake behavior and may
+ be set by the user.
+
+
+
+
+Dmake Version 4.12 2008-02-26 28
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ .DIRCACHE If set to "yes" enables the directory cache (this is
+ the default). If set to "no" disables the directory
+ cache (equivalent to -d command-line flag).
+
+ .DIRCACHERESPCASE
+ If set to "yes" causes the directory cache, if enabled,
+ to respect file case, if set to "no" files are cached
+ case insensitive. By default it is set to "no" on Win-
+ dows as the filesystems on this operating system are
+ case insensitive and set to "yes" for all other operat-
+ ing systems. The default can be overriden, if desired.
+
+ Note: Using case insensitive directory caching on case
+ sensitive file systems is a BAD idea. If in doubt use
+ case sensitive directory caching even on case insensi-
+ tive file systems as the worst case in this scenario is
+ that /foo/bar/ and /foo/BAR/ are cached separately
+ (with the same content) even though they are the same
+ directory. This would only happen if different targets
+ use different upper/lower case spellings for the same
+ directory and that is never a good idea.
+
+ NAMEMAX Defines the maximum length of a filename component.
+ The value of the variable is initialized at startup to
+ the value of the compiled macro NAME_MAX. On some sys-
+ tems the value of NAME_MAX is too short by default.
+ Setting a new value for NAMEMAX will override the com-
+ piled value.
+
+ .NOTABS When set to "yes" enables the use of spaces as well as
+ <tabs> to begin recipe lines. By default a non-group
+ recipe is terminated by a line without any leading
+ white-space or by a line not beggining with a <tab>
+ character. Enabling this mode modifies the first con-
+ dition of the above termination rule to terminate a
+ non-group recipe with a line that contains only
+ white-space. This mode does not effect the parsing of
+ group recipes bracketed by [].
+
+ AUGMAKE If set to "yes" value will enable the transformation of
+ special meta targets to support special AUGMAKE infer-
+ ences (See the "AUGMAKE META RULES" and "COMPATIBILITY"
+ sections).
+
+ DIRBRKSTR Contains the string of chars used to terminate the name
+ of a directory in a pathname. Under UNIX its value is
+ "/", under MSDOS its value is "/\:".
+
+ DIRSEPSTR Contains the string that is used to separate directory
+ components when path names are constructed. It is
+ defined with a default value at startup.
+
+ DIVFILE Is defined in the startup file and gives the name that
+ should be returned for the diversion file name when
+ used in $(mktmp ...) expansions, see the TEXT DIVERSION
+ section for details.
+
+ .KEEP_STATE Assigning this macro a value tells dmake the name of
+ the state file to use and turns on the keeping of state
+
+
+
+Dmake Version 4.12 2008-02-26 29
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ information for any targets that are brought up to date
+ by the make.
+
+ GROUPFLAGS This macro gives the set of flags to pass to the shell
+ when invoking it to execute a group recipe. The value
+ of the macro is the list of flags with a leading switch
+ indicator. (ie. `-' under UNIX)
+
+ GROUPSHELL This macro defines the full path to the executable
+ image to be used as the shell when processing group
+ recipes. This macro must be defined if group recipes
+ are used. It is assigned a default value in the
+ startup makefile. Under UNIX this value is /bin/sh.
+
+ GROUPSUFFIX If defined, this macro gives the string to use as a
+ suffix when creating group recipe files to be handed to
+ the command interpreter. For example, if it is defined
+ as .sh, then all temporary files created by dmake will
+ end in the suffix .sh. Under MSDOS if you are using
+ command.com as your GROUPSHELL, then this suffix must
+ be set to .bat in order for group recipes to function
+ correctly. The setting of GROUPSUFFIX and GROUPSHELL
+ is done automatically for command.com in the startup.mk
+ files.
+
+ MAKE Is defined in the startup file by default. Initially
+ this macro is defined to have the value "$(MAKECMD)
+ $(MFLAGS)". The string $(MAKE) is recognized when
+ using the -n switch.
+
+ MAKESTARTUP This macro defines the full path to the initial startup
+ makefile. Use the -V command line option to discover
+ its initial value.
+
+ MAXLINELENGTH This macro defines the maximum size of a single line of
+ makefile input text. The size is specified as a num-
+ ber, the default value is defined internally and is
+ shown via the -V option. A buffer of this size plus 2
+ is allocated for reading makefile text. The buffer is
+ freed before any targets are made, thereby allowing
+ files containing long input lines to be processed with-
+ out consuming memory during the actual make. This
+ macro can only be used to extend the line length beyond
+ it's default minimum value.
+
+ MAXPROCESS Specify the maximum number of child processes to use
+ when making targets. The default value of this macro
+ is "1" and its value cannot exceed the value of the
+ macro MAXPROCESSLIMIT. Setting the value of MAXPROCESS
+ on the command line or in the makefile is equivalent to
+ supplying a corresponding value to the -P flag on the
+ command line. If the global .SEQUENTIAL attribute is
+ set (or the -S command line switch is used) the value
+ of MAXPROCESS is fixed to "1" and cannot be changed.
+
+ OOODMAKEMODE This macro enables a special compatibility mode needed
+ by the OpenOffice.org build system. If set, the switch
+ disables the removal of leading './' path elements dur-
+ ing target filename normalization (See BINDING
+
+
+
+Dmake Version 4.12 2008-02-26 30
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ TARGETS). If './' appear in the pathname, but not at
+ the beginning of it, they are still removed by the nor-
+ malization. Please note that targets that are given on
+ the command line are going to be registered as default
+ targets after the startup file is read.
+
+ PREP This macro defines the number of iterations to be
+ expanded automatically when processing % rule defini-
+ tions of the form:
+
+ % : %.suff
+
+ See the sections on PERCENT(%) RULES for details on how
+ PREP is used.
+
+ SHELL This macro defines the full path to the executable
+ image to be used as the shell when processing single
+ line recipes. This macro must be defined if recipes
+ requiring the shell for execution are to be used. It
+ is assigned a default value in the startup makefile.
+ Under UNIX this value is /bin/sh.
+
+ SHELLCMDQUOTE This macro can be used to add additional characters
+ before and after the command string that is passed to
+ the shell defined by the SHELL macro. If needed, like
+ for cmd.exe and command.com, it is assigned a value in
+ the startup file.
+
+ SHELLFLAGS This macro gives the set of flags to pass to the shell
+ when invoking it to execute a single line recipe. The
+ value of the macro is the list of flags with a leading
+ switch indicator. (ie. `-' under UNIX)
+
+ SHELLMETAS Each time dmake executes a single recipe line (not a
+ group recipe) the line is searched for any occurrence
+ of a character defined in the value of SHELLMETAS. If
+ such a character is found the recipe line is defined to
+ require a shell to ensure its correct execution. In
+ such instances a shell is used to invoke the recipe
+ line. If no match is found the recipe line is executed
+ without the use of a shell.
+
+
+ There is only one character valued macro defined by dmake: SWITCHAR
+ contains the switch character used to introduce options on command
+ lines. For UNIX its value is `-', and for MSDOS its value may be `/'
+ or `-'. The macro is internally defined and is not user setable. The
+ MSDOS version of dmake attempts to first extract SWITCHAR from an envi-
+ ronment variable of the same name. If that fails it then attempts to
+ use the undocumented getswitchar system call, and returns the result of
+ that. Under MSDOS version 4.0 you must set the value of the environ-
+ ment macro SWITCHAR to '/' to obtain predictable behavior.
+
+ All boolean macros currently understood by dmake correspond directly to
+ the previously defined attributes. These macros provide a second way
+ to apply global attributes, and represent the preferred method of doing
+ so. They are used by assigning them a value. If the value is not a
+ NULL string then the boolean condition is set to on. If the value is a
+ NULL string then the condition is set to off. There are five
+
+
+
+Dmake Version 4.12 2008-02-26 31
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ conditions defined and they correspond directly to the attributes of
+ the same name. Their meanings are defined in the ATTRIBUTES section
+ above. The macros are: .EPILOG, .IGNORE, .MKSARGS, .NOINFER, .PRE-
+ CIOUS, .PROLOG, .SEQUENTIAL, .SILENT, .SWAP, and .USESHELL. Assigning
+ any of these a non NULL value will globally set the corresponding
+ attribute to on.
+
+RUNTIME MACROS
+ These macros are defined when dmake is making targets, and may take on
+ different values for each target. $@ is defined to be the full target
+ name, $? is the list of all out of date prerequisites, except for the !
+ ruleop, in which case it is set to the current build prerequisite
+ instead. $& is the list of all prerequisites, $> is the name of the
+ library if the current target is a library member, and $< is the list
+ of prerequisites specified in the current rule. If the current target
+ had a recipe inferred then $< is the name of the inferred prerequisite
+ even if the target had a list of prerequisites supplied using an
+ explicit rule that did not provide a recipe. In such situations $&
+ gives the full list of prerequisites.
+
+ $* is defined as $(@:db) when making targets with explicit recipes and
+ is defined as the value of % when making targets whose recipe is the
+ result of an inference. In the first case $* is the target name with
+ no suffix, and in the second case, is the value of the matched % pat-
+ tern from the associated %-rule. $^ expands to the set of out of date
+ prerequisites taken from the current value of $<. In addition to
+ these, $$ expands to $, {{ expands to {, }} expands to }, and the
+ strings <+ and +> are recognized as respectively starting and terminat-
+ ing a text diversion when they appear literally together in the same
+ input line.
+
+ The difference between $? and $^ can best be illustrated by an example,
+ consider:
+
+ fred.out : joe amy hello
+ rules for making fred
+
+ fred.out : my.c your.h his.h her.h # more prerequisites
+
+ Assume joe, amy, and my.c are newer then fred.out. When dmake executes
+ the recipe for making fred.out the values of the following macros will
+ be:
+
+ $@ --> fred.out
+ $* --> fred
+ $? --> joe amy my.c # note output of $? vs $^
+ $^ --> joe amy
+ $< --> joe amy hello
+ $& --> joe amy hello my.c your.h his.h her.h
+
+
+FUNCTION MACROS
+ dmake supports a full set of functional macros. One of these, the
+ $(mktmp ...) macro, is discussed in detail in the TEXT DIVERSION sec-
+ tion and is not covered here. The names of function macros must appear
+ literally after the opening $( or ${. They are not recognized if they
+ are the result of a recursive expansion.
+
+ Note that some of these macros take comma separated parameters but that
+
+
+
+Dmake Version 4.12 2008-02-26 32
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ these parameters must not contain literal whitespaces. Whitespaces in
+ macros used in these parameters are allowed.
+
+
+ $(and macroterm ...)
+ expands each macroterm in turn until there are no more or
+ one of them returns an empty string. If all expand to
+ non-empty strings the macro returs the string "t" other-
+ wise it returns an empty string.
+
+
+ $(assign expression)
+ Causes expression to be parsed as a macro assignment
+ expression and results in the specified assignment being
+ made. An error is issued if the assignment is not
+ syntatically correct. expression may contain white
+ space. This is in effect a dynamic macro assignment
+ facility and may appear anywhere any other macro may
+ appear. The result of the expanding a dynamic macro
+ assignment expression is the name of the macro that was
+ assigned and $(NULL) if the expression is not a valid
+ macro assignment expression. Some examples are:
+
+ $(assign foo := fred)
+ $(assign $(ind_macro_name) +:= $(morejunk))
+
+ $(echo list)
+ Echo's the value of list. list is not expanded.
+
+ $(eq,text_a,text_b true false)
+ expands text_a and text_b and compares their results. If
+ equal it returns the result of the expansion of the true
+ term, otherwise it returns the expansion of the false
+ term.
+
+ $(!eq,text_a,text_b true false)
+ Behaves identically to the previous macro except that the
+ true string is chosen if the expansions of the two
+ strings are not equal
+
+ $(foreach,var,list data)
+ Implements iterative macro expansion over data using var
+ as the iterator taking on values from list. var and list
+ are expanded and the result is the concatenation of
+ expanding data with var being set to each whitespace sep-
+ arated token from list. For example:
+
+ list = a b c
+ all :; echo [$(foreach,i,$(list) [$i])]
+
+ will output
+
+ [[a] [b] [c]]
+
+ The iterator variable is defined as a local variable to
+ this foreach instance. The following expression illus-
+ trates this:
+
+ $(foreach,i,$(foreach,i,$(sort c a b) root/$i) [$i/f.h])
+
+
+
+Dmake Version 4.12 2008-02-26 33
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ when evaluated the result is:
+
+ [root/a/f.h] [root/b/f.h] [root/c/f.h]
+
+ The specification of list must be a valid macro expres-
+ sion, such as:
+
+ $($(assign list=a b c))
+ $(sort d a b c)
+ $(echo a b c)
+
+ and cannot just be the list itself. That is, the follow-
+ ing foreach expression:
+
+ $(foreach,i,a b c [$i])
+
+ yields:
+
+ "b c [a]"
+
+ when evaluated.
+
+ $(nil expression)
+ Always returns the value of $(NULL) regardless of what
+ expression is. This function macro can be used to dis-
+ card results of expanding macro expressions.
+
+ $(normpath list)
+ Will return the normalized path names of all white-space
+ separated tokens in list. Quotes can be used to normalize
+ path names that contain white-space characters. On cygwin
+ the result honors the setting of .WINPATH to determine
+ the output format of the returned path names.
+
+ $(normpath,para list)
+ Same as above except that the expanded value of para is
+ used to override the .WINPATH setting.
+
+ $(not macroterm)
+ expands macroterm and returs the string "t" if the result
+ of the expansion is the empty string; otherwise, it
+ returns the empty string.
+
+ $(null,text true false)
+ expands the value of text. If it is NULL then the macro
+ returns the value of the expansion of true and the expan-
+ sion of false otherwise. The terms true, and false must
+ be strings containing no white-space.
+
+ $(!null,text true false)
+ Behaves identically to the previous macro except that the
+ true string is chosen if the expansion of text is not
+ NULL.
+
+ $(or macroterm ...)
+ expands each macroterm in turn and returs the empty
+ string if each term expands to the empty string; other-
+ wise, it returs the string "t".
+
+
+
+
+Dmake Version 4.12 2008-02-26 34
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ $(shell command)
+ is a shell escape macro. It runs command as if it were
+ part of a recipe and returns, separated by a single
+ space, all the non-white space terms written to stdout by
+ the command. For example:
+
+ $(shell ls *.c)
+
+ will return "a.c b.c c.c d.c" if the files exist in the
+ current directory. The recipe modification flags [+@%-]
+ are honored if they appear as the first characters in the
+ command. For example:
+
+ $(shell +ls *.c)
+
+ will run the command using the current shell.
+
+ Note that if the macro is part of a recipe it will be
+ evaluated after all previous recipe lines have been exe-
+ cuted. For obvious reasons it will be evaluated before
+ the current recipe line or group recipe is executed.
+
+ $(shell,expand command)
+ Is an extension to the $(shell command) function macro
+ that expands the result of running command.
+
+ $(sort list)
+ Will take all white-space separated tokens in list and
+ will return their sorted equivalent list.
+
+ $(strip data)
+ Will replace all strings of white-space in data by a sin-
+ gle space.
+
+ $(subst,pat,replacement data)
+ Will search for pat in data and will replace any occur-
+ rence of pat with the replacement string. The expansion
+
+ $(subst,.o,.c $(OBJECTS))
+
+ is equivalent to:
+
+ $(OBJECTS:s/.o/.c/)
+
+
+ $(uniq list)
+ Will take all white-space separated tokens in list and
+ will return their sorted equivalent list containing no
+ duplicates.
+
+ For historic reasons dmake treats the following case slightly special:
+
+ $(name something)
+
+ If it encounters a macro with a whitespace after name and name is not
+ literally one of the above mentioned function macro identifiers then
+ dmake will return the recursively expanded value of $(name). The
+ remaining something part will be expanded but the result will be dis-
+ carded. The use of this special feature is deprecated and should not be
+
+
+
+Dmake Version 4.12 2008-02-26 35
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ used.
+
+
+CONDITIONAL MACROS
+ dmake supports conditional macros. These allow the definition of tar-
+ get specific macro values. You can now say the following:
+
+ target ?= MacroName MacroOp Value
+
+ This creates a definition for MacroName whose value is Value only when
+ target is being made. You may use a conditional macro assignment any-
+ where that a regular macro assignment may appear, including as the
+ value of a $(assign ...) macro.
+
+ The new definition is associated with the most recent cell definition
+ for target. If no prior definition exists then one is created. The
+ implications of this are immediately evident in the following example:
+
+ foo := hello
+
+ all : cond;@echo "all done, foo=[$(foo)] bar=[$(bar)]"
+
+ cond ?= bar := global decl
+
+ cond .SETDIR=unix::;@echo $(foo) $(bar)
+ cond ?= foo := hi
+
+ cond .SETDIR=msdos::;@echo $(foo) $(bar)
+ cond ?= foo := hihi
+
+ The first conditional assignment creates a binding for 'bar' that is
+ activated when 'cond' is made. The bindings following the :: defini-
+ tions are activated when their respective recipe rules are used. Thus
+ the first binding serves to provide a global value for 'bar' while any
+ of the cond :: rules are processed, and the local bindings for 'foo'
+ come into effect when their associated :: rule is processed.
+
+ Conditionals for targets of .UPDATEALL are all activated before the
+ target group is made. Assignments are processed in order. Note that
+ the value of a conditional macro assignment is NOT AVAILABLE until the
+ associated target is made, thus the construct
+
+ mytarget ?= bar := hello
+ mytarget ?= foo := $(bar)
+
+ results in $(foo) expanding to "", if you want the result to be "hello"
+ you must use:
+
+ mytarget ?= bar := hello
+ mytarget ?= foo = $(bar)
+
+ Once a target is made any associated conditional macros are deactivated
+ and their values are no longer available. Activation occurrs after all
+ inference, and .SETDIR directives have been processed and after $@ is
+ assigned, but before prerequisites are processed; thereby making the
+ values of conditional macro definitions available during construction
+ of prerequisites.
+
+ If a %-meta rule target has associated conditional macro assignments,
+
+
+
+Dmake Version 4.12 2008-02-26 36
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ and the rule is chosen by the inference algorithm then the conditional
+ macro assignments are inferred together with the associated recipe.
+
+DYNAMIC PREREQUISITES
+ dmake looks for prerequisites whose names contain macro expansions dur-
+ ing target processing. Any such prerequisites are expanded and the
+ result of the expansion is used as the prerequisite name. As an exam-
+ ple the line:
+
+ fred : $$@.c
+
+ causes the $$@ to be expanded when dmake is making fred, and it
+ resolves to the target fred. This enables dynamic prerequisites to be
+ generated. The value of @ may be modified by any of the valid macro
+ modifiers. So you can say for example:
+
+ fred.out : $$(@:b).c
+
+ where the $$(@:b) expands to fred. Note the use of $$ instead of $ to
+ indicate the dynamic expansion, this is due to the fact that the rule
+ line is expanded when it is initially parsed, and $$ then returns $
+ which later triggers the dynamic prerequisite expansion. Dynamic macro
+ expansion is performed in all user defined rules, and the special tar-
+ gets .SOURCE*, and .INCLUDEDIRS.
+
+ NOTE: The use of a $ as part of a prerequisite or target name is
+ strongly discouraged as the runtime macros (like $@) are expanded when
+ used in a recipe line so that the $ is interpreted as a macro identi-
+ fier and not as a character of the filename leading to invalid runtime
+ macros. In addition to this no filename normalization is done for pre-
+ requisites and targets that contain $ characters. Nevertheless it is
+ possible to use $ in prerequisites by using $$$$ but this is not recom-
+ mended and can lead to surprising results.
+
+ If dynamic macro expansion results in multiple white space separated
+ tokens then these are inserted into the prerequisite list inplace of
+ the dynamic prerequisite. Due to the recursive nature of macro expan-
+ sion the prerequisite list is fully expanded even if the dynamic pre-
+ requisite contained other runtime macros.
+
+BINDING TARGETS
+ This operation takes a target name and binds it to an existing file, if
+ possible. dmake makes a distinction between the internal target name
+ of a target and its associated external file name. Thus it is possible
+ for a target's internal name and its external file name to differ. To
+ perform the binding, the following set of rules is used. Assume that
+ we are trying to bind a target whose name is of the form X.suff, where
+ .suff is the suffix and X is the stem portion (ie. that part which con-
+ tains the directory and the basename). dmake takes this target name
+ and performs a series of search operations that try to find a suitably
+ named file in the external file system. The search operation is user
+ controlled via the settings of the various .SOURCE targets.
+
+ 1. If target has the .SYMBOL attribute set then look for it
+ in the library. If found, replace the target name with
+ the library member name and continue with step 2. If the
+ name is not found then return.
+
+ 2. Extract the suffix portion (that following the `.') of
+ the target name. If the suffix is not null, look up the
+
+
+
+Dmake Version 4.12 2008-02-26 37
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ special target .SOURCE.<suff> (<suff> is the suffix). If
+ the special target exists then search each directory
+ given in the .SOURCE.<suff> prerequisite list for the
+ target. If the target's suffix was null (ie. .suff was
+ empty) then perform the above search but use the special
+ target .SOURCE.NULL instead. If at any point a match is
+ found then terminate the search. If a directory in the
+ prerequisite list is the special name `.NULL ' perform a
+ search for the full target name without prepending any
+ directory portion (ie. prepend the NULL directory).
+
+ 3. The search in step 2. failed. Repeat the same search but
+ this time use the special target .SOURCE. (a default
+ target of '.SOURCE : .NULL' is defined by dmake at
+ startup, and is user redefinable)
+
+ 4. The search in step 3. failed. If the target has the
+ library member attribute (.LIBMEMBER) set then try to
+ find the target in the library which was passed along
+ with the .LIBMEMBER attribute (see the MAKING LIBRARIES
+ section). The bound file name assigned to a target which
+ is successfully located in a library is the same name
+ that would be assigned had the search failed (see 5.).
+
+ 5. The search failed. Either the target was not found in
+ any of the search directories or no applicable .SOURCE
+ special targets exist. If applicable .SOURCE special
+ targets exist, but the target was not found, then dmake
+ assigns the first name searched as the bound file name.
+ If no applicable .SOURCE special targets exist, then the
+ full original target name becomes the bound file name.
+
+ There is potential here for a lot of search operations. The trick is
+ to define .SOURCE.x special targets with short search lists and leave
+ .SOURCE as short as possible. The search algorithm has the following
+ useful side effect. When a target having the .LIBMEMBER (library mem-
+ ber) attribute is searched for, it is first searched for as an ordinary
+ file. When a number of library members require updating it is desir-
+ able to compile all of them first and to update the library at the end
+ in a single operation. If one of the members does not compile and
+ dmake stops, then the user may fix the error and make again. dmake
+ will not remake any of the targets whose object files have already been
+ generated as long as none of their prerequisite files have been modi-
+ fied as a result of the fix.
+
+ When dmake constructs target (and prerequisite) pathnames they are nor-
+ malized to the shortest (or most natural, see below for the cygwin
+ case) representation. Substrings like './' or of the form 'baz/..' are
+ removed and multiple slashes are collapsed to one unless they are at
+ the beginning of the pathname. Leading slashes are normalized according
+ to POSIX rules, i.e. more than two leading slashes are reduced to one
+ slash and a leading '//' is kept as it might have a special meaning.
+ For example "./foo", "bar/../foo" and foo are recognized as the same
+ file. This may result in somewhat unexpected values of the macro
+ expansion of runtime macros like $@, but is infact the corect result.
+
+ NOTE: A cygwin dmake executable will accept DOS like pathnames with
+ drive letters and cygwin POSIX pathnames and normalize them into its
+ natural POSIX representation. This might result in even more surpris-
+ ing values of runtime macros.
+
+
+
+Dmake Version 4.12 2008-02-26 38
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ When defining .SOURCE and .SOURCE.x targets the construct
+
+ .SOURCE :
+ .SOURCE : fred gery
+
+ is equivalent to
+
+ .SOURCE :- fred gery
+
+ dmake correctly handles the UNIX Make variable VPATH. By definition
+ VPATH contains a list of ':' separated directories to search when look-
+ ing for a target. dmake maps VPATH to the following special rule:
+
+ .SOURCE :^ $(VPATH:s/:/ /)
+
+ Which takes the value of VPATH and sets .SOURCE to the same set of
+ directories as specified in VPATH.
+
+PERCENT(%) RULES AND MAKING INFERENCES
+ When dmake makes a target, the target's set of prerequisites (if any)
+ must exist and the target must have a recipe which dmake can use to
+ make it. If the makefile does not specify an explicit recipe for the
+ target then dmake uses special rules to try to infer a recipe which it
+ can use to make the target. Previous versions of Make perform this
+ task by using rules that are defined by targets of the form .<suf-
+ fix>.<suffix> (this is still supported, see "AUGMAKE META RULES") or by
+ using the not supported by dmake .SUFFIXES list of suffixes (see "SPE-
+ CIAL TARGETS" for more details about .SUFFIXES). The exact workings of
+ this mechanism were sometimes difficult to understand and often limit-
+ ing in their usefulness. Instead, dmake supports the concept of %-meta
+ rules. The syntax and semantics of these rules differ from standard
+ rule lines as follows:
+
+ <%-targets> [<attributes>] <ruleop> [<%-prereqs>] [;<recipe>]
+
+ where %-targets are one or more targets containing exactly a single `%'
+ sign, attributes is a list (possibly empty) of attributes, ruleop is
+ the standard set of rule operators, %-prereqs , if present, is a list
+ of prerequisites containing zero or more `%' signs, and recipe, if
+ present, is the first line of the recipe.
+
+ If more than one %-target is present this line is equivalent to a repe-
+ tition of the whole [<attributes>] <ruleop> [<%-prereqs>] [;<recipe>]
+ sequence for each %-target, i.e. it is possible to specify the same
+ rule for multiple %-targets. Because of this following only speaks
+ about <%-target> as %-targets are divided into multiple definitions
+ with a single %-target.
+
+ NOTE: As multiple %-targets didn't work reliably with dmake versions
+ prior to 4.5 unless the rule operator `|:' was used we currently issue
+ a warning stating that it now works.
+
+ The %-target defines a pattern against which a target whose recipe is
+ being inferred gets matched. The pattern match goes as follows: all
+ chars are matched exactly from left to right up to but not including
+ the % sign in the pattern, % then matches the longest string from the
+ actual target name not ending in the suffix given after the % sign in
+ the pattern. Consider the following examples:
+
+ %.c matches fred.c but not joe.c.Z
+ dir/%.c matches dir/fred.c but not dd/fred.c
+ fred/% matches fred/joe.c but not f/joe.c
+ % matches anything
+
+
+
+
+Dmake Version 4.12 2008-02-26 39
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ In each case the part of the target name that matched the % sign is
+ retained and is substituted for any % signs in the prerequisite list of
+ the %-meta rule when the rule is selected during inference and dmake
+ constructs the new dependency.
+
+ Please note, that only the first, non-indirect, prerequisite of the
+ list is used for the inference mechanism. If more than one non-indirect
+ prerequisite is given a warning is issued and all but the first non-
+ indirect prerequisites are ignored. See below for a description of
+ indirect prerequisites.
+
+ As an example the following %-meta rules describe the following:
+
+ %.c : %.y ; recipe...
+
+ describes how to make any file ending in .c if a corresponding file
+ ending in .y can be found.
+
+ foo%.o : fee%.k ; recipe...
+
+ is used to describe how to make fooxxxx.o from feexxxx.k.
+
+ %.a :; recipe...
+
+ describes how to make a file whose suffix is .a without inferring any
+ prerequisites.
+
+ %.c : %.y 'yaccsrc/%.y' ; recipe...
+
+ matches the corresponding .y file as prerequisite and additionally
+ another .y file in the yaccsrc subdirectory as indirect prerequisite.
+ Another interesting example is:
+
+ % : RCS/%,v ; co $<
+
+ which describes how to take any target and check it out of the RCS
+ directory if the corresponding file exists in the RCS directory. The
+ equivalent SCCS rule would be:
+
+ % : s.% ; get $<
+
+
+ The previous RCS example defines an infinite rule, because it says how
+ to make anything from RCS/%,v, and anything also includes RCS/fred.c,v.
+ To limit the size of the graph that results from such rules dmake uses
+ the macro variable PREP (stands for % repetition). By default the
+ value of this variable is 0, which says that no repetitions of a %-rule
+ are to be generated. If it is set to something greater than 0, then
+ that many repetitions of any infinite %-rule are allowed. If in the
+ above example PREP was set to 1, then dmake would generate the depen-
+ dency graph:
+
+ % --> RCS/%,v --> RCS/RCS/%,v,v
+
+ Where each link is assigned the same recipe as the first link. PREP
+ should be used only in special cases, since it may result in a large
+ increase in the number of possible prerequisites tested. dmake further
+ assumes that any target that has no suffix can be made from a prerequi-
+ site that has at least one suffix.
+
+ dmake supports dynamic prerequisite generation for prerequisites of
+ %-meta rules. This is best illustrated by an example. The RCS rule
+ shown above can infer how to check out a file from a corresponding RCS
+ file only if the target is a simple file name with no directory
+
+
+
+Dmake Version 4.12 2008-02-26 40
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ information. That is, the above rule can infer how to find
+ RCS/fred.c,v from the target fred.c, but cannot infer how to find
+ srcdir/RCS/fred.c,v from srcdir/fred.c because the above rule will
+ cause dmake to look for RCS/srcdir/fred.c,v; which does not exist
+ (assume that srcdir has its own RCS directory as is the common case).
+
+ A more versatile formulation of the above RCS check out rule is the
+ following:
+
+ % : $$(@:d)RCS/$$(@:f),v : co $@
+
+ This rule uses the dynamic macro $@ to specify the prerequisite to try
+ to infer. During inference of this rule the macro $@ is set to the
+ value of the target of the %-meta rule and the appropriate prerequisite
+ is generated by extracting the directory portion of the target name (if
+ any), appending the string RCS/ to it, and appending the target file
+ name with a trailing ,v attached to the previous result.
+
+ dmake can also infer indirect prerequisites. An inferred target can
+ have a list of prerequisites added that will not show up in the value
+ of $< but will show up in the value of $? and $&. Indirect prerequi-
+ sites are specified in an inference rule by quoting the prerequisite
+ with single quotes. For example, if you had the explicit dependency:
+
+ fred.o : fred.c ; rule to make fred.o
+ fred.o : local.h
+
+ then this can be inferred for fred.o from the following inference rule:
+
+ %.o : %.c 'local.h' ; makes a .o from a .c
+
+ You may infer indirect prerequisites that are a function of the value
+ of '%' in the current rule. The meta-rule:
+
+ %.o : %.c '$(INC)/%.h' ; rule to make a .o from a .c
+
+ infers an indirect prerequisite found in the INC directory whose name
+ is the same as the expansion of $(INC), and the prerequisite name
+ depends on the base name of the current target. The set of indirect
+ prerequisites is attached to the meta rule in which they are specified
+ and are inferred only if the rule is used to infer a recipe for a tar-
+ get. They do not play an active role in driving the inference algo-
+ rithm. The construct:
+
+ %.o :| %.c %.f 'local.h'; recipe
+
+ is equivalent to:
+
+ %.o : %.c 'local.h' ; recipe
+ %.o : %.f 'local.h' ; recipe
+
+
+ If any of the attributes .EPILOG, .IGNORE, .LIBRARY, .NOSTATE, .PHONY,
+ .PRECIOUS, .PROLOG, .SETDIR, .SILENT, .SWAP, .USESHELL and .WINPATH are
+ given for a %-rule then when that rule is bound to a target as the
+ result of an inference, the target's set of attributes is augmented by
+ the attributes from the above set that are specified in the bound
+ %-rule. Other attributes specified for %-meta rules are not inherited
+ by the target. The .SETDIR attribute is treated in a special way. If
+ the target already had a .SETDIR attribute set then dmake changes to
+ that directory prior to performing the inference. During inference any
+ .SETDIR attributes for the inferred prerequisite are honored. The
+ directories must exist for a %-meta rule to be selected as a possible
+ inference path. If the directories do not exist no error message is
+
+
+
+Dmake Version 4.12 2008-02-26 41
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ issued, instead the corresponding path in the inference graph is
+ rejected.
+
+ dmake bases all of its inferences on the inference graph constructed
+ from the %-rules defined in the makefile. It knows exactly which tar-
+ gets can be made from which prerequisites by making queries on the
+ inference graph.
+
+ For a %-meta rule to be inferred as the rule whose recipe will be used
+ to make a target, the target's name must match the %-target pattern,
+ and any inferred %-prerequisite must already exist or have an explicit
+ recipe so that the prerequisite can be made. Without transitive clo-
+ sure on the inference graph the above rule describes precisely when an
+ inference match terminates the search. If transitive closure is
+ enabled (the usual case), and a prerequisite does not exist or cannot
+ be made, then dmake invokes the inference algorithm recursively on the
+ prerequisite to see if there is some way the prerequisite can be manu-
+ factured. For, if the prerequisite can be made then the current target
+ can also be made using the current %-meta rule. This means that there
+ is no longer a need to give a rule for making a .o from a .y if you
+ have already given a rule for making a .o from a .c and a .c from a .y.
+ In such cases dmake can infer how to make the .o from the .y via the
+ intermediary .c and will remove the .c when the .o is made. Transitive
+ closure can be disabled by giving the -T switch on the command line.
+
+ A word of caution. dmake bases its transitive closure on the %-meta
+ rule targets. When it performs transitive closure it infers how to
+ make a target from a prerequisite by performing a pattern match as if
+ the potential prerequisite were a new target. The set of rules:
+
+ %.o : %.c ; rule for making .o from .c
+ %.c : %.y ; rule for making .c from .y
+ % : RCS/%,v ; check out of RCS file
+
+ will, by performing transitive closure, allow dmake to infer how to
+ make a .o from a .y using a .c as an intermediate temporary file.
+ Additionally it will be able to infer how to make a .y from an RCS
+ file, as long as that RCS file is in the RCS directory and has a name
+ which ends in .y,v. The transitivity computation is performed dynami-
+ cally for each target that does not have a recipe. This has potential
+ to be costly if the %-meta rules are not carefully specified. The
+ .NOINFER attribute is used to mark a %-meta node as being a final tar-
+ get during inference. Any node with this attribute set will not be
+ used for subsequent inferences. As an example the node RCS/%,v is
+ marked as a final node since we know that if the RCS file does not
+ exist there likely is no other way to make it. Thus the standard
+ startup makefile contains an entry similar to:
+ .NOINFER : RCS/%,v
+ Thereby indicating that the RCS file is the end of the inference chain.
+ Whenever the inference algorithm determines that a target can be made
+ from more than one prerequisite and the inference chains for the two
+ methods are the same length the algorithm reports an ambiguity and
+ prints the ambiguous inference chains.
+
+ dmake tries to remove intermediate files resulting from transitive clo-
+ sure if the file is not marked as being PRECIOUS, or the -u flag was
+ not given on the command line, and if the inferred intermediate did not
+ previously exist. Intermediate targets that existed prior to being
+ made are never removed. This is in keeping with the philosophy that
+ dmake should never remove things from the file system that it did not
+ add. If the special target .REMOVE is defined and has a recipe then
+ dmake constructs a list of the intermediate files to be removed and
+ makes them prerequisites of .REMOVE. It then makes .REMOVE thereby
+ removing the prerequisites if the recipe of .REMOVE says to. Typically
+
+
+
+Dmake Version 4.12 2008-02-26 42
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ .REMOVE is defined in the startup file as:
+
+ .REMOVE :; $(RM) $<
+
+AUGMAKE META RULES
+ As a subclass of the meta targets that is actually mapped to %-meta
+ rules dmake understands several SYSV AUGMAKE targets transformations.
+ This .<suffix> special target construct transforms into the following
+ %-meta rules:
+
+ .suff :; recipe
+
+ gets mapped into:
+
+ % : %.suff; recipe
+
+
+ dmake also supports the old format special target .<suffix>.<suffix> by
+ identifying any rules of this form and mapping them to the appropriate
+ %-rule. So for example if an old makefile contains the construct:
+
+ .c.o :; cc -c $< -o $@
+
+ dmake maps this into the following %-rule:
+
+ %.o : %.c; cc -c $< -o $@
+
+ The following SYSV AUGMAKE special targets transformation must be
+ enabled by providing the -A flag on the command line or by setting the
+ value of AUGMAKE to non-NULL. The construct
+
+ .c~.o :; recipe
+
+ gets mapped into:
+
+ %.o : s.%.c ; recipe
+
+ In general, a special target of the form .<str>~ is replaced by the
+ %-rule construct s.%.<str>, thereby providing support for the syntax
+ used by SYSV AUGMAKE for providing SCCS support. When enabled, these
+ mappings allow processing of existing SYSV makefiles without modifica-
+ tions.
+
+MAKING TARGETS
+ In order to update a target dmake must execute a recipe. When a recipe
+ needs to be executed it is first expanded so that any macros in the
+ recipe text are expanded, and it is then either executed directly or
+ passed to a shell. dmake supports two types of recipes. The regular
+ recipes and group recipes.
+
+ When a regular recipe is invoked dmake executes each line of the recipe
+ separately using a new copy of a shell if a shell is required. Thus
+ effects of commands do not generally persist across recipe lines (e.g.
+ cd requests in a recipe line do not carry over to the next recipe
+ line). This is true even in environments such as MSDOS, where dmake
+ internally sets the current working director to match the directory it
+ was in before the command was executed.
+
+ The decision on whether a shell is required to execute a command is
+ based on the value of the macro SHELLMETAS or on the specification of
+ '+' or .USESHELL for the current recipe or target respectively. If any
+ character in the value of SHELLMETAS is found in the expanded recipe
+ text-line or the use of a shell is requested explicitly via '+' or
+ .USESHELL then the command is executed using a shell, otherwise the
+
+
+
+Dmake Version 4.12 2008-02-26 43
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ command is executed directly. The shell that is used for execution is
+ given by the value of the macro SHELL. The flags that are passed to
+ the shell are given by the value of SHELLFLAGS. Thus dmake constructs
+ the command line:
+
+ $(SHELL) $(SHELLFLAGS) $(expanded_recipe_command)
+
+ If the $(SHELLCMDQUOTE) macro is set its value is inserted before and
+ after the $(expanded_recipe_command) string.
+
+ Normally dmake writes the command line that it is about to invoke to
+ standard output. If the .SILENT attribute is set for the target or for
+ the recipe line (via @), then the recipe line is not echoed.
+
+ Group recipe processing is similar to that of regular recipes, except
+ that a shell is always invoked. The shell that is invoked is given by
+ the value of the macro GROUPSHELL, and its flags are taken from the
+ value of the macro GROUPFLAGS. If a target has the .PROLOG attribute
+ set then dmake prepends to the shell script the recipe associated with
+ the special target .GROUPPROLOG, and if the attribute .EPILOG is set as
+ well, then the recipe associated with the special target .GROUPEPILOG
+ is appended to the script file. This facility can be used to always
+ prepend a common header and common trailer to group recipes. Group
+ recipes are echoed to standard output just like standard recipes, but
+ are enclosed by lines beginning with [ and ].
+
+ The recipe flags [+,-,%,@] are recognized at the start of a recipe line
+ even if they appear in a macro. For example:
+
+ SH = +
+ all:
+ $(SH)echo hi
+
+ is completely equivalent to writing
+
+ SH = +
+ all:
+ +echo hi
+
+
+ The last step performed by dmake prior to running a recipe is to set
+ the macro CMNDNAME to the name of the command to execute (determined by
+ finding the first white-space ending token in the command line). It
+ then sets the macro CMNDARGS to be the remainder of the line. dmake
+ then expands the macro COMMAND which by default is set to
+
+ COMMAND = $(CMNDNAME) $(CMNDARGS)
+
+ The result of this final expansion is the command that will be exe-
+ cuted. The reason for this expansion is to allow for a different
+ interface to the argument passing facilities (esp. under DOS) than that
+ provided by dmake. You can for example define COMMAND to be
+
+ COMMAND = $(CMNDNAME) @$(mktmp $(CMNDARGS))
+
+ which dumps the arguments into a temporary file and runs the command
+
+ $(CMNDNAME) @/tmp/ASAD23043
+
+ which has a much shorter argument list. It is now up to the command to
+ use the supplied argument as the source for all other arguments. As an
+ optimization, if COMMAND is not defined dmake does not perform the
+ above expansion. On systems, such as UNIX, that handle long command
+ lines this provides a slight saving in processing the makefiles.
+
+
+
+Dmake Version 4.12 2008-02-26 44
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+MAKING LIBRARIES
+ Libraries are easy to maintain using dmake. A library is a file con-
+ taining a collection of object files. Thus to make a library you sim-
+ ply specify it as a target with the .LIBRARY attribute set and specify
+ its list of prerequisites. The prerequisites should be the object mem-
+ bers that are to go into the library. When dmake makes the library
+ target it uses the .LIBRARY attribute to pass to the prerequisites the
+ .LIBMEMBER attribute and the name of the library. This enables the
+ file binding mechanism to look for the member in the library if an
+ appropriate object file cannot be found. dmake now supports Elf
+ libraries on systems that support Elf and hence supports, on those sys-
+ tems, long member file names. A small example best illustrates this.
+
+ mylib.a .LIBRARY : mem1.o mem2.o mem3.o
+ rules for making library...
+ # remember to remove .o's when lib is made
+
+ # equivalent to: '%.o : %.c ; ...'
+ .c.o :; rules for making .o from .c say
+
+ dmake will use the .c.o rule for making the library members if appro-
+ priate .c files can be found using the search rules. NOTE: this is
+ not specific in any way to C programs, they are simply used as an exam-
+ ple.
+
+ dmake tries to handle the old library construct format in a sensible
+ way. The construct lib(member.o) is separated and the lib portion is
+ declared as a library target. The new target is defined with the
+ .LIBRARY attribute set and the member.o portion of the construct is
+ declared as a prerequisite of the lib target. If the construct
+ lib(member.o) appears as a prerequisite of a target in the makefile,
+ that target has the new name of the lib assigned as its prerequisite.
+ Thus the following example:
+
+ a.out : ml.a(a.o) ml.a(b.o); $(CC) -o $@ $<
+
+ .c.o :; $(CC) -c $(CFLAGS) -o $@ $<
+ %.a:
+ ar rv $@ $?
+ ranlib $@
+ rm -rf $?
+
+ constructs the following dependency graph.
+
+ a.out : ml.a; $(CC) -o $@ $<
+ ml.a .LIBRARY : a.o b.o
+
+ %.o : %.c ; $(CC) -c $(CFLAGS) -o $@ $<
+ %.a :
+ ar rv $@ $?
+ ranlib $@
+ rm -rf $?
+
+ and making a.out then works as expected.
+
+ The same thing happens for any target of the form lib((entry)). These
+ targets have an additional feature in that the entry target has the
+ .SYMBOL attribute set automatically.
+
+ NOTE: If the notion of entry points is supported by the archive and by
+ dmake (currently not the case) then dmake will search the archive for
+ the entry point and return not only the modification time of the member
+ which defines the entry but also the name of the member file. This
+ name will then replace entry and will be used for making the member
+
+
+
+Dmake Version 4.12 2008-02-26 45
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ file. Once bound to an archive member the .SYMBOL attribute is removed
+ from the target. This feature is presently disabled as there is little
+ standardization among archive formats, and we have yet to find a make-
+ file utilizing this feature (possibly due to the fact that it is unim-
+ plemented in most versions of UNIX Make).
+
+ Finally, when dmake looks for a library member it must first locate the
+ library file. It does so by first looking for the library relative to
+ the current directory and if it is not found it then looks relative to
+ the current value of $(TMD). This allows commonly used libraries to be
+ kept near the root of a source tree and to be easily found by dmake.
+
+KEEP STATE
+ dmake supports the keeping of state information for targets that it
+ makes whenever the macro .KEEP_STATE is assigned a value. The value of
+ the macro should be the name of a state file that will contain the
+ state information. If state keeping is enabled then each target that
+ does not poses the .NOSTATE attribute will have a record written into
+ the state file indicating the target's name, the current directory, the
+ command used to update the target, and which, if any, :: rule is being
+ used. When you make this target again if any of this information does
+ not match the previous settings and the target is not out dated it will
+ still be re-made. The assumption is that one of the conditions above
+ has changed and that we wish to remake the target. For example, state
+ keeping is used in the maintenance of dmake to test compile different
+ versions of the source using different compilers. Changing the com-
+ piler causes the compilation flags to be modified and hence all sources
+ to be recompiled.
+
+ The state file is an ascii file and is portable, however it is not in
+ human readable form as the entries represent hash keys of the above
+ information.
+
+ The Sun Microsystem's Make construct
+
+ .KEEP_STATE :
+
+ is recognized and is mapped to .KEEP_STATE:=_state.mk. The dmake ver-
+ sion of state keeping does not include scanning C source files for
+ dependencies like Sun Make. This is specific to C programs and it was
+ felt that it does not belong in make. dmake instead provides the tool,
+ cdepend, to scan C source files and to produce depedency information.
+ Users are free to modify cdepend to produce other dependency files.
+ (NOTE: cdepend does not come with the distribution at this time, but
+ will be available in a patch in the near future)
+
+MULTI PROCESSING
+ If the architecture supports it then dmake is capable of making a tar-
+ get's prerequisites in parallel. dmake will make as much in parallel
+ as it can and use a number of child processes up to the maximum speci-
+ fied by MAXPROCESS or by the value supplied to the -P command line
+ flag. A parallel make is enabled by setting the value of MAXPROCESS
+ (either directly or via -P option) to a value which is > 1. dmake
+ guarantees that all dependencies as specified in the makefile are hon-
+ ored. A target will not be made until all of its prerequisites have
+ been made. Note that when you specify -P 4 then four child processes
+ are run concurrently but dmake actually displays the fifth command it
+ will run immediately upon a child process becomming free. This is an
+ artifact of the method used to traverse the dependency graph and cannot
+ be removed. If a parallel make is being performed then the following
+ restrictions on parallelism are enforced.
+
+ 1. Individual recipe lines in a non-group recipe are per-
+ formed sequentially in the order in which they are
+
+
+
+Dmake Version 4.12 2008-02-26 46
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ specified within the makefile and in parallel with the
+ recipes of other targets.
+
+ 2. If a target contains multiple recipe definitions (cf. ::
+ rules) then these are performed sequentially in the order
+ in which the :: rules are specified within the makefile
+ and in parallel with the recipes of other targets.
+
+ 3. If a target rule contains the `!' modifier, then the
+ recipe is performed sequentially for the list of outdated
+ prerequisites and in parallel with the recipes of other
+ targets.
+
+ 4. If a target has the .SEQUENTIAL attribute set then all of
+ its prerequisites are made sequentially relative to one
+ another (as if MAXPROCESS=1), but in parallel with other
+ targets in the makefile.
+
+ Note: If you specify a parallel make then the order of target update
+ and the order in which the associated recipes are invoked will not cor-
+ respond to that displayed by the -n flag.
+
+CONDITIONALS
+ dmake supports a makefile construct called a conditional. It allows
+ the user to conditionally select portions of makefile text for input
+ processing and to discard other portions. This becomes useful for
+ writing makefiles that are intended to function for more than one tar-
+ get host and environment. The conditional expression is specified as
+ follows:
+
+ .IF expression
+ ... if text ...
+ .ELIF expression
+ ... if text ...
+ .ELSE
+ ... else text ...
+ .END
+
+ The .ELSE and .ELIF portions are optional, and the conditionals may be
+ nested (ie. the text may contain another conditional). .IF, .ELSE,
+ and .END may appear anywhere in the makefile, but a single conditional
+ expression may not span multiple makefiles.
+
+ expression can be one of the following forms:
+
+ String evaluation
+ <text> | <text> == <text> | <text> != <text>
+
+ Numeric evaluation
+ <text> <= <text> | <text> >= <text>
+
+ Boolean evaluation
+ ( <text> ) | <text> || <text> | <text> && <text>
+
+ where text is either text or a macro expression. In any case, before
+ the comparison is made, the expression is expanded. The text portions
+ are then selected and compared. In the case of the numeric comparisons
+ enclosing quotes are removed after expanding the expressions and the
+ leading numerical parts are converted to an integer number. If no
+ numerical part is found this results to 0 (zero). The string "12ab" for
+ example evaluates to the number 12. Expressions can be nested with ()
+ and the use of || or &&. White space at the start and end of the text
+ portion is discarded before the comparison. This means that a macro
+ that evaluates to nothing but white space is considered a NULL value
+
+
+
+Dmake Version 4.12 2008-02-26 47
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ for the purpose of the comparison. In the first case the expression
+ evaluates TRUE if the text is not NULL otherwise it evaluates FALSE.
+ The remaining two cases both evaluate the expression on the basis of a
+ string comparison. If a macro expression needs to be equated to a NULL
+ string then compare it to the value of the macro $(NULL). You can use
+ the $(shell ...) macro to construct more complex test expressions.
+
+EXAMPLES
+ # A simple example showing how to use make
+ #
+ prgm : a.o b.o
+ cc a.o b.o -o prgm
+ a.o : a.c g.h
+ cc a.c -o $@
+ b.o : b.c g.h
+ cc b.c -o $@
+
+ In the previous example prgm is remade only if a.o and/or b.o is out of
+ date with respect to prgm. These dependencies can be stated more con-
+ cisely by using the inference rules defined in the standard startup
+ file. The default rule for making .o's from .c's looks something like
+ this:
+
+ %.o : %.c; cc -c $(CFLAGS) -o $@ $<
+
+ Since there exists a rule (defined in the startup file) for making .o's
+ from .c's dmake will use that rule for manufacturing a .o from a .c and
+ we can specify our dependencies more concisely.
+
+ prgm : a.o b.o
+ cc -o prgm $<
+ a.o b.o : g.h
+
+ A more general way to say the above using the new macro expansions
+ would be:
+
+ SRC = a b
+ OBJ = {$(SRC)}.o
+
+ prgm : $(OBJ)
+ cc -o $@ $<
+
+ $(OBJ) : g.h
+
+ If we want to keep the objects in a separate directory, called objdir,
+ then we would write something like this.
+
+ SRC = a b
+ OBJ = {$(SRC)}.o
+
+ prgm : $(OBJ)
+ cc $< -o $@
+
+ $(OBJ) : g.h
+ %.o : %.c
+ $(CC) -c $(CFLAGS) -o $(@:f) $<
+ mv $(@:f) objdir
+
+ .SOURCE.o : objdir # tell dmake to look here for .o's
+
+ An example of building library members would go something like this:
+ (NOTE: The same rules as above will be used to produce .o's from .c's)
+
+ SRC= a b
+
+
+
+Dmake Version 4.12 2008-02-26 48
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ LIB= lib
+ LIBm= { $(SRC) }.o
+
+ prgm: $(LIB)
+ cc -o $@ $(LIB)
+
+ $(LIB) .LIBRARY : $(LIBm)
+ ar rv $@ $<
+ rm $<
+
+ Finally, suppose that each of the source files in the previous example
+ had the `:' character in their target name. Then we would write the
+ above example as:
+
+ SRC= f:a f:b
+ LIB= lib
+ LIBm= "{ $(SRC) }.o" # put quotes around each token
+
+ prgm: $(LIB)
+ cc -o $@ $(LIB)
+
+ $(LIB) .LIBRARY : $(LIBm)
+ ar rv $@ $<
+ rm $<
+
+COMPATIBILITY
+ There are two notable differences between dmake and the standard ver-
+ sion of BSD UNIX 4.2/4.3 Make.
+
+ 1. BSD UNIX 4.2/4.3 Make supports wild card filename expansion
+ for prerequisite names. Thus if a directory contains a.h,
+ b.h and c.h, then a line like
+
+ target: *.h
+
+ will cause UNIX make to expand the *.h into "a.h b.h c.h".
+ dmake does not support this type of filename expansion.
+
+ 2. Unlike UNIX make, touching a library member causes dmake to
+ search the library for the member name and to update the
+ library time stamp. This is only implemented in the UNIX
+ version. MSDOS and other versions may not have librarians
+ that keep file time stamps, as a result dmake touches the
+ library file itself, and prints a warning.
+
+ dmake is not compatible with GNU Make. In particular it does not
+ understand GNU Make's macro expansions that query the file system.
+
+ dmake is fully compatible with SYSV AUGMAKE, and supports the following
+ AUGMAKE features:
+
+ 1. GNU Make style include, and if/else/endif directives are
+ allowed in non-group recipes. Thus, the word include appear-
+ ing at the start of a line that is not part of a gruop recipe
+ will be mapped to the ".INCLUDE" directive that damke uses.
+ Similarly, the words ifeq,ifneq,elif,else, and endif are
+ mapped to their corresponding dmake equivalents.
+
+ 2. The macro modifier expression $(macro:str=sub) is understood
+ and is equivalent to the expression $(macro:s/str/sub), with
+ the restriction that str must match the following regular
+ expression:
+
+ str[ |\t][ |\t]*
+
+
+
+Dmake Version 4.12 2008-02-26 49
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ (ie. str only matches at the end of a token where str is a
+ suffix and is terminated by a space, a tab, or end of line)
+ Normally sub is expanded before the substitution is made, if
+ you specify -A on the command line then sub is not expanded.
+
+ 3. The macro % is defined to be $@ (ie. $% expands to the same
+ value as $@).
+
+ 4. The AUGMAKE notion of libraries is handled correctly.
+
+ 5. Directories are always made if you specify -A. This is con-
+ sistent with other UNIX versions of Make.
+
+ 6. Makefiles that utilize virtual targets to force making of
+ other targets work as expected if AUGMAKE special target han-
+ dling is enabled. For example:
+
+ FRC:
+ myprog.o : myprog.c $(FRC) ; ...
+
+ Works as expected if you issue the command
+
+ 'dmake -A FRC=FRC'
+
+ but fails with a 'don't know how to make FRC' error message
+ if you do not specify AUGMAKE special target handling via the
+ -A flag (or by setting AUGMAKE:=yes internally).
+
+LIMITS
+ In some environments the length of an argument string is restricted.
+ (e.g. MSDOS command line arguments cannot be longer than 128 bytes if
+ you are using the standard command.com command interpreter as your
+ shell, dmake text diversions may help in these situations.)
+
+PORTABILITY
+ To write makefiles that can be moved from one environment to another
+ requires some forethought. In particular you must define as macros all
+ those things that may be different in the new environment. dmake has
+ two facilities that help to support writing portable makefiles, recur-
+ sive macros and conditional expressions. The recursive macros, allow
+ one to define environment configurations that allow different environ-
+ ments for similar types of operating systems. For example the same
+ make script can be used for SYSV and BSD but with different macro defi-
+ nitions.
+
+ To write a makefile that is portable between UNIX and MSDOS requires
+ both features since in almost all cases you will need to define new
+ recipes for making targets. The recipes will probably be quite differ-
+ ent since the capabilities of the tools on each machine are different.
+ Different macros will be needed to help handle the smaller differences
+ in the two environments.
+
+FILES
+ Makefile, makefile, startup.mk (use dmake -V to tell you where the
+ startup file is)
+
+SEE ALSO
+ sh(1), csh(1), touch(1), f77(1), pc(1), cc(1)
+ S.I. Feldman Make - A Program for Maintaining Computer Programs
+
+AUTHOR
+ Dennis Vadura, dvadura@wticorp.com
+ Many thanks to Carl Seger for his helpful suggestions, and to Trevor
+ John Thompson for his many excellent ideas and informative bug reports.
+
+
+
+Dmake Version 4.12 2008-02-26 50
+
+
+
+
+
+DMAKE(1) DMAKE(1)
+
+
+ Many thanks also go to those on the NET that have helped in making
+ dmake one of the best Make tools available.
+
+BUGS
+ Some system commands return non-zero status inappropriately. Use -i
+ (`-' within the makefile) to overcome the difficulty.
+
+ Some systems do not have easily accessible time stamps for library mem-
+ bers (MSDOS, AMIGA, etc) for these dmake uses the time stamp of the
+ library instead and prints a warning the first time it does so. This
+ is almost always ok, except when multiple makefiles update a single
+ library file. In these instances it is possible to miss an update if
+ one is not careful.
+
+ This man page is way too long.
+
+WARNINGS
+ Rules supported by make(1) may not work if transitive closure is turned
+ off (-T, .NOINFER).
+
+ PWD from csh/ksh will cause problems if a cd operation is performed and
+ -e or -E option is used.
+
+ Using internal macros such as COMMAND, may wreak havoc if you don't
+ understand their functionality.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+Dmake Version 4.12 2008-02-26 51
+
+
generated by cgit (git 2.34.1) at 2025-01-11 03:18:06 +0000