diff options
Diffstat (limited to 'psprint_config/configuration/ppds/LOPTRAEP.PS')
| -rw-r--r-- | psprint_config/configuration/ppds/LOPTRAEP.PS | 693 |
1 files changed, 693 insertions, 0 deletions
diff --git a/psprint_config/configuration/ppds/LOPTRAEP.PS b/psprint_config/configuration/ppds/LOPTRAEP.PS new file mode 100644 index 000000000000..3de55842f098 --- /dev/null +++ b/psprint_config/configuration/ppds/LOPTRAEP.PS @@ -0,0 +1,693 @@ +*PPD-Adobe: "4.2"
+*% Adobe PostScript(R) Printer Description File
+*% For Lexmark Optra Ep LaserPrinter
+*% Produced by Lexmark International, Inc.
+*%
+*% Copyright (c) 1993-1998 Lexmark International Inc. All Rights Reserved.
+*% Permission is granted for redistribution of this file as
+*% long as this copyright notice is intact and the content
+*% of the file is not altered in any way from its original form.
+*%
+*%
+*% WARNING: If you want to edit this PPD file and use it with Aldus
+*% PageMaker, be sure to use an editor (such as DOS Edit)
+*% that does NOT add an end-of-file marker (hex 1A) when
+*% it stores the file.
+*%
+*%
+*%
+
+*FormatVersion: "4.2"
+*FileVersion: "1.0"
+*LanguageEncoding: WindowsANSI
+*LanguageVersion: English
+*PCFileName: "LOPTREP.PPD"
+*Product: "(Lexmark Optra E LaserPrinter)"
+*PSVersion: ""
+*ModelName: "Lexmark Optra Ep LaserPrinter"
+*ShortNickName: "Lexmark Optra Ep PS"
+*NickName: "Lexmark Optra Ep PS"
+
+*% === Options and Constraints ============
+
+*OpenGroup: InstallableOptions/Options Installed
+*OpenUI *Option1/Lower Tray - Option: Boolean
+*DefaultOption1: False
+*Option1 True/Installed: ""
+*Option1 False/Not Installed: ""
+*CloseUI: *Option1
+
+*OpenUI *Option2/Flash Memory Card - Option: Boolean
+*DefaultOption2: False
+*Option2 False/Not Installed: ""
+*Option2 True/Installed: ""
+*CloseUI: *Option2
+
+*OpenUI *InstalledMemory/Printer Memory - Option: Pickone
+*DefaultInstalledMenory: 2MB
+*InstalledMemory 2MB/2 MB Printer Memory:""
+*InstalledMemory 3MB/3 MB Printer Memory:""
+*InstalledMemory 4MB/4 MB Printer Memory:""
+*InstalledMemory 6MB/6 MB Printer Memory:""
+*CloseUI: *InstalledMemory
+
+*CloseGroup: InstallableOptions
+
+*% ====User Constraints ====
+*UIConstraints: *Option1 False *InputSlot Lower
+*UIConstraints: *Option1 False *JCLTray2PaperType Normal
+*UIConstraints: *Option1 False *JCLTray2PaperType Rough
+*UIConstraints: *Option1 False *TraySwitch True
+*UIConstraints: *Option2 None *FileSystem True
+
+*UIConstraints: *InputSlot Lower *PageSize Monarch
+*UIConstraints: *InputSlot Lower *PageSize C4
+*UIConstraints: *InputSlot Lower *PageSize Comm10
+*UIConstraints: *InputSlot Lower *PageSize DL
+*UIConstraints: *InputSlot Lower *PageSize C5
+*UIConstraints: *InputSlot Lower *PageSize ISOB5
+*UIConstraints: *InputSlot Lower *PageSize C3
+
+*UIConstraints: *Resolution 600dpi *Smoothing
+*UIConstraints: *Resolution 600dpi *JCLEconomode ON
+*UIConstraints: *Resolution 600dpi *JCLEconomode OFF
+*UIConstraints: *Smoothing True *JCLEconomode ON
+*UIConstraints: *Smoothing True *JCLEconomode OFF
+*UIConstraints: *JCLEconomode ON *Smoothing
+
+*% === Basic Capabilities ============
+
+*LanguageLevel: "2"
+*Protocols: PJL TBCP
+*ColorDevice: False
+*DefaultColorSpace: Gray
+*TTRasterizer: Type42
+*Throughput: "6"
+*FreeVM: "376000"
+*VMOption 2MB : "376000"
+*VMOption 3MB : "552000"
+*VMOption 4MB : "728000"
+*VMOption 6MB : "828000"
+
+*Password: "0"
+*ExitServer: "
+ count 0 eq % is the password on the stack?
+ { true }
+ { dup % potential password
+ statusdict /checkpassword get exec not
+ } ifelse
+ { % if no password or not valid
+ (WARNING : Cannot perform the exitserver command.) =
+ (Password supplied is not valid.) =
+ (Please contact the author of this software.) = flush
+ quit
+ } if
+ serverdict /exitserver get exec
+ "
+*End
+*Reset: "
+ count 0 eq % is the password on the stack?
+ { true }
+ { dup % potential password
+ statusdict /checkpassword get exec not
+ } ifelse
+ { % if no password or not valid
+ (WARNING : Cannot reset printer.) =
+ (Password supplied is not valid.) =
+ (Please contact the author of this software.) = flush
+ quit
+ } if
+ serverdict /exitserver get exec
+ systemdict /quit get exec
+ (WARNING : Printer Reset Failed.) = flush
+ "
+*End
+
+*% === Job Control Language ==
+
+*JCLBegin: "<1B>%-12345X@PJL JOB<0A>"
+*JCLToPSInterpreter: "@PJL ENTER LANGUAGE = Postscript <0A>"
+*JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X"
+
+*JCLOpenUI *JCLDensity/Print Darkness: PickOne
+*DefaultJCLDensity: PrinterSetting
+*OrderDependency: 20 JCLSetup *JCLDensity
+*JCLDensity PrinterSetting/Printer's default: ""
+*JCLDensity VLIGHT/Very Light: "@PJL SET DENSITY = 1<0A>"
+*JCLDensity LIGHT/Light: "@PJL SET DENSITY = 2<0A>"
+*JCLDensity NORMAL/Normal: "@PJL SET DENSITY = 3<0A>"
+*JCLDensity DARK/Dark: "@PJL SET DENSITY = 4<0A>"
+*JCLDensity VDARK/Very Dark: "@PJL SET DENSITY = 5<0A>"
+*JCLCloseUI: *JCLDensity
+
+*JCLOpenUI *JCLEconomode/Toner Saver: PickOne
+*DefaultJCLEconomode: PrinterSetting
+*OrderDependency: 10 JCLSetup *JCLEconomode
+*JCLEconomode PrinterSetting/Printer's default: ""
+*JCLEconomode ON/On: "@PJL SET ECONOMODE = ON<0A>"
+*JCLEconomode OFF/Off: "@PJL SET ECONOMODE = OFF<0A>"
+*JCLCloseUI: *JCLEconomode
+*% ==== Paper Type ====
+
+*JCLOpenUI *JCLManualPaperType/Manual Feed Paper Type: PickOne
+*DefaultJCLManualPaperType: Printer
+*OrderDependency: 10 JCLSetup *JCLManualPaperType
+*JCLManualPaperType Printer/Printer's default:""
+*JCLManualPaperType Normal/Normal: "@PJL LMANUALPAPERTYPE = NORMAL<0A>"
+*JCLManualPaperType Rough/Rough Paper: "@PJL LMANUALPAPERTYPE = ROUGH<0A>"
+*JCLManualPaperType Card/Card Stock: "@PJL LMANUALPAPERTYPE = CARDSTOCK<0A>"
+*JCLManualPaperType Transparency/Transparency: "@PJL LMANUALPAPERTYPE = TRANSPARENCY<0A>"
+*JCLManualPaperType Labels/Labels: "@PJL LMANUALPAPERTYPE = LABELS<0A>"
+*JCLCloseUI: *JCLManualPaperType
+
+*JCLOpenUI *JCLTray1PaperType/Tray 1 Paper Type: PickOne
+*DefaultJCLTray1PaperType: Printer
+*OrderDependency: 10 JCLSetup *JCLTray1PaperType
+*JCLTray1PaperType Printer/Printer's default:""
+*JCLTray1PaperType Normal/Normal: "@PJL LTRAY1PAPERTYPE = NORMAL<0A>"
+*JCLTray1PaperType Rough/Rough Paper: "@PJL LTRAY1PAPERTYPE = ROUGH<0A>"
+*JCLTray1PaperType Card/Card Stock: "@PJL LTRAY1PAPERTYPE = CARDSTOCK<0A>"
+*JCLTray1PaperType Transparency/Transparency: "@PJL LTRAY1PAPERTYPE = TRANSPARENCY<0A>"
+*JCLTray1PaperType Labels/Labels: "@PJL LTRAY1PAPERTYPE = LABELS<0A>"
+*JCLCloseUI: *JCLTray1PaperType
+
+*JCLOpenUI *JCLTray2PaperType/Tray 2 Paper Type: PickOne
+*DefaultJCLTray2PaperType: Printer
+*OrderDependency: 10 JCLSetup *JCLTray2PaperType
+*JCLTray2PaperType Printer/Printer's default:""
+*JCLTray2PaperType Normal/Normal: "@PJL LTRAY2PAPERTYPE = NORMAL<0A>"
+*JCLTray2PaperType Rough/Rough Paper: "@PJL LTRAY2PAPERTYPE = ROUGH<0A>"
+*JCLCloseUI: *JCLTray2PaperType
+
+*CloseGroup: PaperType
+
+*% ==== Image Enhancement =====
+
+*JCLOpenUI *JCLPictureGrade/PictureGrade: PickOne
+*DefaultJCLPictureGrade: Printer
+*OrderDependency: 10 JCLSetup *JCLPictureGrade
+*JCLPictureGrade Printer/Printer's default:""
+*JCLPictureGrade On/On: "@PJL LPARM:POSTSCRIPT LPICTUREGRADE = ON<0A>"
+*JCLPictureGrade Off/Off: "@PJL LPARM:POSTSCRIPT LPICTUREGRADE = OFF<0A>"
+*JCLCloseUI: *JCLPictureGrade
+
+*% === Resolution ============
+
+*OpenUI *Resolution/Resolution: PickOne
+*DefaultResolution: 600dpi
+*OrderDependency: 10 AnySetup *Resolution
+*Resolution 300dpi/300 dpi: "1 dict dup /HWResolution [300 300] put setpagedevice"
+*Resolution 600dpi/600 dpi: "1 dict dup /HWResolution [600 600] put setpagedevice"
+*?Resolution: "
+ save
+ currentpagedevice /HWResolution get 0 get
+ ( ) cvs print (dpi) = flush
+ restore
+ "
+*End
+*CloseUI: *Resolution
+
+*OpenUI *Smoothing/Smoothing: PickOne
+*DefaultSmoothing: False
+*OrderDependency: 40 AnySetup *Smoothing
+*Smoothing True/On: "
+ 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 2 put put setpagedevice"
+*End
+*Smoothing False/Off: "
+ 1 dict dup /PostRenderingEnhanceDetails 1 dict dup /REValue 0 put put setpagedevice"
+*End
+*?Smoothing: "
+ save
+ currentpagedevice /PostRenderingEnhanceDetails get /REValue get
+ dup 3 gt{pop 4}if [(False)(True)(True)(True)(Unknown)] exch get = flush
+ restore
+ "
+*End
+*CloseUI: *Smoothing
+
+*% === Halftone Information ===============
+
+*ScreenFreq: "60.0"
+*ScreenAngle: "45.0"
+*DefaultScreenProc: Dot
+*ScreenProc Dot: "
+ {abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
+ sub }{dup mul exch dup mul add 1 exch sub }ifelse }
+ "
+*End
+*ScreenProc Line: "{ pop }"
+*ScreenProc Ellipse: "{ dup 5 mul 8 div mul exch dup mul exch add sqrt 1 exch sub }"
+
+*DefaultTransfer: Factory
+*Transfer Factory: "{ }"
+*Transfer Factory.Inverse: "{ 1 exch sub }"
+
+*% === Paper Handling ===================
+
+*LandscapeOrientation: Plus90
+
+*% These entries will set up the frame buffer.
+*% Usually used with AutoSelect input slot.
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+*OpenUI *PageSize: PickOne
+*OrderDependency: 30 AnySetup *PageSize
+*DefaultPageSize: Letter
+*PageSize Letter/Letter: "
+ 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Legal/Legal: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Executive/Executive: "
+ 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize A4/A4: "
+ 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize A5/A5: "
+ 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize B5/B5: "
+ 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Monarch/Monarch Envelope: "
+ 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C4/C9 Envelope: "
+ 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize Comm10/C10 Envelope: "
+ 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize DL/DL Envelope: "
+ 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C5/C5 Envelope: "
+ 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize ISOB5/B5 Envelope: "
+ 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageSize C3/Other Envelope: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*?PageSize: "
+ save
+ 13 dict
+ dup /letter (Letter) put
+ dup /legal (Legal) put
+ dup /executivepage (Executive) put
+ dup /a4 (A4) put
+ dup /a5 (A5) put
+ dup /b5 (B5) put
+ dup /3.875x7.5envelope (Monarch) put
+ dup /3.875x8.875envelope (C9) put
+ dup /4.125x9.5envelope (Comm10) put
+ dup /110x220envelope (DL) put
+ dup /162x229envelope (C5) put
+ dup /176x250envelope (Envelope.499.709) put
+ dup /otherenvelope (Envelope.612.996) put
+ statusdict /papersize get exec
+ 3 1 roll {get} stopped {(Unknown)}if
+ exch not { print (.Transverse) }if
+ = flush
+ restore
+ "
+*End
+*CloseUI: *PageSize
+
+*% These entries will set up the frame buffer.
+*% Usually used with input slots other than AutoSelect.
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+*OpenUI *PageRegion: PickOne
+*OrderDependency: 40 AnySetup *PageRegion
+*DefaultPageRegion: Letter
+*PageRegion Letter: "
+ 2 dict dup /PageSize [612 792] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Legal: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Executive: "
+ 2 dict dup /PageSize [522 756] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion A4: "
+ 2 dict dup /PageSize [595 842] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion A5: "
+ 2 dict dup /PageSize [420 595] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion B5: "
+ 2 dict dup /PageSize [516 729] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Monarch: "
+ 2 dict dup /PageSize [279 540] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C4: "
+ 2 dict dup /PageSize [279 639] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion Comm10: "
+ 2 dict dup /PageSize [297 684] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion DL: "
+ 2 dict dup /PageSize [312 624] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C5: "
+ 2 dict dup /PageSize [459 649] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion ISOB5: "
+ 2 dict dup /PageSize [499 709] put dup /ImagingBBox null put setpagedevice"
+*End
+*PageRegion C3: "
+ 2 dict dup /PageSize [612 1008] put dup /ImagingBBox null put setpagedevice"
+*End
+*CloseUI: *PageRegion
+
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+*DefaultImageableArea: Letter
+*ImageableArea Letter: "12 12 600 780"
+*ImageableArea Legal: "12 12 600 996"
+*ImageableArea B5: "12 12 505 716"
+*ImageableArea A4: "10 12 588 829"
+*ImageableArea Executive: "12 12 510 744"
+*ImageableArea A5: "12 12 407 583"
+*ImageableArea Monarch: "12 12 278 528"
+*ImageableArea C4: "12 12 278 626"
+*ImageableArea Comm10: "12 12 294 672"
+*ImageableArea DL: "12 12 309 611"
+*ImageableArea C5: "12 12 455 636"
+*ImageableArea ISOB5: "12 12 497 696"
+*ImageableArea C3: "12 12 600 996"
+*?ImageableArea: "
+ save
+ /cvp { cvi ( ) cvs print ( ) print } bind def
+ newpath clippath pathbbox
+ 4 -2 roll exch 2 {ceiling cvp} repeat
+ exch 2 {floor cvp} repeat flush
+ restore
+ "
+*End
+
+*% These provide the physical dimensions of the paper (by keyword)
+*% Used C4 for C9 envelope, ISOB5 for B5 envelope, and C3 for
+*% Other Envelope because C9, B5, and Other Envelope are not defined in
+*% Adobe PPD specifications. Correct sizes, regions, imageable areas, and
+*% dimensions are given. Translation strings give correct names.
+*DefaultPaperDimension: Letter
+*PaperDimension Letter: "612 792"
+*PaperDimension Legal: "612 1008"
+*PaperDimension B5: "516 729"
+*PaperDimension A4: "595 842"
+*PaperDimension Executive: "522 756"
+*PaperDimension A5: "420 595"
+*PaperDimension Monarch: "279 540"
+*PaperDimension C4: "279 639"
+*PaperDimension Comm10: "297 684"
+*PaperDimension DL: "312 624"
+*PaperDimension C5: "459 649"
+*PaperDimension ISOB5: "498 708"
+*PaperDimension C3: "612 1008"
+
+*RequiresPageRegion All: True
+
+*% ==== Input Slots ====
+
+*OpenUI *InputSlot: PickOne
+*OrderDependency: 20 AnySetup *InputSlot
+
+*DefaultInputSlot: AutoSelect
+*InputSlot AutoSelect/Auto Select: "
+ 1 dict dup /Policies 1 dict dup /PageSize 2 put put setpagedevice"
+*End
+
+*InputSlot Upper/Upper Tray: "
+ 1 dict dup /MediaPosition null put setpagedevice
+ currentpagedevice /InputAttributes get 0 get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [0] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+
+*InputSlot Lower/Lower Tray: "
+ 1 dict dup /MediaPosition null put setpagedevice
+ userdict /lms
+ currentpagedevice /InputAttributes get 1 known { 1 }{ 0 }ifelse put
+ currentpagedevice /InputAttributes get lms get setpagedevice
+ 1 dict dup /InputAttributes 1 dict dup /Priority [lms] put put setpagedevice
+ 1 dict dup /Policies 1 dict dup /PageSize 7 put put setpagedevice"
+*End
+*?InputSlot: "
+ save
+ [ (Upper) (Lower) ]
+ statusdict /papertray get exec
+ {get exec} stopped { pop pop (Unknown) } if = flush
+ restore
+ "
+*End
+*CloseUI: *InputSlot
+
+*OpenUI *ManualFeed/Manual Paper: Boolean
+*OrderDependency: 15 AnySetup *ManualFeed
+*DefaultManualFeed: False
+*ManualFeed True/On: "1 dict dup /ManualFeed true put setpagedevice"
+*ManualFeed False/Off: "1 dict dup /ManualFeed false put setpagedevice"
+*?ManualFeed: "
+ save
+ currentpagedevice /ManualFeed get {(True)}{(False)}ifelse = flush
+ restore
+ "
+*End
+*CloseUI: *ManualFeed
+
+*OpenUI *TraySwitch/Tray Linking: Boolean
+*OrderDependency: 50 AnySetup *TraySwitch
+*DefaultTraySwitch: False
+*TraySwitch True/On: "1 dict dup /TraySwitch true put setpagedevice"
+*TraySwitch False/Off: "1 dict dup /TraySwitch false put setpagedevice"
+*?TraySwitch: "
+ save
+ currentpagedevice /TraySwitch get {(True)}{(False)}ifelse = flush
+ restore
+ "
+*End
+*CloseUI: *TraySwitch
+
+*DefaultOutputOrder: Normal
+*OutputOrder Normal: ""
+*OutputOrder Reverse: ""
+
+*% === Font Information ==========================================
+
+*DefaultFont: Courier
+*Font Courier: Standard "(001.000)" Standard ROM
+*Font Courier-Bold: Standard "(001.000)" Standard ROM
+*Font Courier-Oblique: Standard "(001.000)" Standard ROM
+*Font Courier-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Times-Roman: Standard "(001.000)" Standard ROM
+*Font Times-Bold: Standard "(001.000)" Standard ROM
+*Font Times-Italic: Standard "(001.000)" Standard ROM
+*Font Times-BoldItalic: Standard "(001.000)" Standard ROM
+*Font Helvetica: Standard "(001.000)" Standard ROM
+*Font Helvetica-Bold: Standard "(001.000)" Standard ROM
+*Font Helvetica-Oblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-Bold: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-BoldOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Narrow-Oblique: Standard "(001.000)" Standard ROM
+*Font Symbol: Special "(001.000)" Standard ROM
+*Font AvantGarde-Book: Standard "(001.000)" Standard ROM
+*Font AvantGarde-BookOblique: Standard "(001.000)" Standard ROM
+*Font AvantGarde-Demi: Standard "(001.000)" Standard ROM
+*Font AvantGarde-DemiOblique: Standard "(001.000)" Standard ROM
+*Font Bookman-Demi: Standard "(001.000)" Standard ROM
+*Font Bookman-DemiItalic: Standard "(001.000)" Standard ROM
+*Font Bookman-Light: Standard "(001.000)" Standard ROM
+*Font Bookman-LightItalic: Standard "(001.000)" Standard ROM
+*Font Helvetica-Light: Standard "(001.000)" Standard ROM
+*Font Helvetica-LightOblique: Standard "(001.000)" Standard ROM
+*Font Helvetica-Black: Standard "(001.000)" Standard ROM
+*Font Helvetica-BlackOblique: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Roman: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Bold: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-Italic: Standard "(001.000)" Standard ROM
+*Font NewCenturySchlbk-BoldItalic: Standard "(001.000)" Standard ROM
+*Font Palatino-Roman: Standard "(001.000)" Standard ROM
+*Font Palatino-Bold: Standard "(001.000)" Standard ROM
+*Font Palatino-Italic: Standard "(001.000)" Standard ROM
+*Font Palatino-BoldItalic: Standard "(001.000)" Standard ROM
+*Font ZapfChancery-MediumItalic: Standard "(001.000)" Standard ROM
+*Font ZapfDingbats: Special "(001.000)" Special ROM
+*?FontQuery: "
+ save
+ 4 dict begin
+ /sv exch def
+ /str (fonts/ ) def
+ /st2 128 string def
+ { count 0 gt
+ { dup st2 cvs (/) print print (:) print dup FontDirectory exch known
+ {pop (Yes)}
+ { str exch st2 cvs dup length /len exch def
+ 6 exch putinterval str 0 len 6 add getinterval mark exch
+ { } st2 filenameforall counttomark 0 gt
+ { cleartomark (Yes)}{cleartomark (No)}ifelse
+ }ifelse = flush
+ }{ exit } ifelse
+ } bind loop
+ (*) = flush
+ sv
+ end
+ restore
+ "
+*End
+
+*?FontList: "
+ save
+ 2 dict begin
+ /sv exch def
+ /str 128 string def
+ FontDirectory { pop == } bind forall flush
+ /filenameforall where
+ { pop save (fonts/*)
+ { dup length 6 sub 6 exch getinterval cvn == } bind
+ str filenameforall flush restore
+ } if
+ (*) = flush
+ sv
+ end
+ restore
+ "
+*End
+
+*% Printer Messages (verbatim from printer):
+*Message: "%% exitserver: permanent state may be changed %%"
+*Message: "%% Flushing: rest of job (to end-of-file) will be ignored %%"
+*Message: "\FontName\ not found, using Courier"
+
+*% Status (format: %% status: <one of these> %% )
+*Status: "Printer Busy"
+*Status: "Warming Up"
+*Status: "idle"
+*Status: "busy"
+*Status: "waiting"
+*Status: "initializing"
+*Status: "not ready"
+
+*% Input Sources (format: %% status: <stat>; source: <one of these> %% )
+*Source: "Serial"
+*Source: "Parallel"
+*Source: "Network"
+
+*% Printer Error (format: %% PrinterError: <one of these> %%)
+*PrinterError: "Paper Jam"
+*PrinterError: "Wrong Paper Length"
+*PrinterError: "Invalid Manual Insertion"
+*PrinterError: "Change Size in Feeder"
+*PrinterError: "Change Size in Tray 1"
+*PrinterError: "Change Size in Tray 2"
+*PrinterError: "Paper Out or Feed Failure - Feed"
+*PrinterError: "Load Manual Envelope"
+*PrinterError: "Paper Out or Feed Failure - Tray 1"
+*PrinterError: "Paper Out or Feed Failure - Tray 2"
+*PrinterError: "Load Manual Paper"
+*PrinterError: "Output Bin Full"
+*PrinterError: "Cover Open/Cartridge Not Installed"
+*PrinterError: "Insufficient Memory"
+*PrinterError: "Complex Page"
+*PrinterError: "Default Storage Error"
+*PrinterError: "Defective Font Card Installed"
+*PrinterError: "Flash Full"
+*PrinterError: "ioerror"
+*PrinterError: "Flash Error"
+*PrinterError: "Duplex Not Attached"
+*PrinterError: "Duplex Cover Open"
+*PrinterError: "Scheduled Maintenance"
+*PrinterError: "Toner Low"
+*PrinterError: "Service Error"
+
+*%DeviceAdjustMatrix: " 1 0 0 1 0 0 "
+
+*% === Color Separation Information =====================
+
+*DefaultColorSep: ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi
+
+*InkName: ProcessBlack/Process Black
+*InkName: CustomColor/Custom Color
+*InkName: ProcessCyan/Process Cyan
+*InkName: ProcessMagenta/Process Magenta
+*InkName: ProcessYellow/Process Yellow
+
+*% For 60 lpi / 300 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "45"
+*ColorSepScreenAngle CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "45"
+*ColorSepScreenAngle ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "15"
+*ColorSepScreenAngle ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "75"
+*ColorSepScreenAngle ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "0"
+
+*ColorSepScreenFreq ProcessBlack.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq CustomColor.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessCyan.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessMagenta.60lpi.300dpi/60 lpi / 300 dpi: "60"
+*ColorSepScreenFreq ProcessYellow.60lpi.300dpi/60 lpi / 300 dpi: "60"
+
+*% For 53 lpi / 300 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
+*ColorSepScreenFreq CustomColor.53lpi.300dpi/53 lpi / 300 dpi: "53.033"
+*ColorSepScreenFreq ProcessCyan.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
+*ColorSepScreenFreq ProcessMagenta.53lpi.300dpi/53 lpi / 300 dpi: "47.4342"
+*ColorSepScreenFreq ProcessYellow.53lpi.300dpi/53 lpi / 300 dpi: "50.0"
+
+*% For 85 lpi / 600 dpi 5,5,2,6,6,2,20/3,0) =====================
+
+*ColorSepScreenAngle ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
+*ColorSepScreenFreq CustomColor.85lpi.600dpi/85 lpi / 600 dpi: "84.8528"
+*ColorSepScreenFreq ProcessCyan.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
+*ColorSepScreenFreq ProcessMagenta.85lpi.600dpi/85 lpi / 600 dpi: "94.8683"
+*ColorSepScreenFreq ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "30.0"
+
+*ColorSepScreenProc ProcessYellow.85lpi.600dpi/85 lpi / 600 dpi: "
+ {1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
+ 1 add 2 div 3 mul dup floor sub 2 mul 1 sub exch
+ abs exch abs 2 copy add 1 gt {1 sub dup mul exch 1 sub dup mul add 1
+ sub }{dup mul exch dup mul add 1 exch sub }ifelse }
+ "
+*End
+
+*% For 71 lpi / 600 dpi ===============================
+
+*ColorSepScreenAngle ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "45.0"
+*ColorSepScreenAngle ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "71.5651"
+*ColorSepScreenAngle ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "18.4349"
+*ColorSepScreenAngle ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "0.0"
+
+*ColorSepScreenFreq ProcessBlack.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
+*ColorSepScreenFreq CustomColor.71lpi.600dpi/71 lpi / 600 dpi: "70.7107"
+*ColorSepScreenFreq ProcessCyan.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
+*ColorSepScreenFreq ProcessMagenta.71lpi.600dpi/71 lpi / 600 dpi: "63.2456"
+*ColorSepScreenFreq ProcessYellow.71lpi.600dpi/71 lpi / 600 dpi: "66.6667"
+
+
+*% End of PPD file for Lexmark Optra E plus LaserPrinter
|