1 files changed, 206 insertions, 0 deletions
diff --git a/qadevOOo/tests/java/mod/_svx/SvxShapeDimensioning.java b/qadevOOo/tests/java/mod/_svx/SvxShapeDimensioning.java
new file mode 100644
index 000000000000..df0867559f98
--- /dev/null
+++ b/qadevOOo/tests/java/mod/_svx/SvxShapeDimensioning.java
@@ -0,0 +1,206 @@
+/*************************************************************************
+ *
+ *  $RCSfile: SvxShapeDimensioning.java,v $
+ *
+ *  $Revision: 1.1 $
+ *
+ *  last change:$Date: 2003-01-27 18:18:08 $
+ *
+ *  The Contents of this file are made available subject to the terms of
+ *  either of the following licenses
+ *
+ *         - GNU Lesser General Public License Version 2.1
+ *         - Sun Industry Standards Source License Version 1.1
+ *
+ *  Sun Microsystems Inc., October, 2000
+ *
+ *  GNU Lesser General Public License Version 2.1
+ *  =============================================
+ *  Copyright 2000 by Sun Microsystems, Inc.
+ *  901 San Antonio Road, Palo Alto, CA 94303, USA
+ *
+ *  This library is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU Lesser General Public
+ *  License version 2.1, as published by the Free Software Foundation.
+ *
+ *  This library is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  Lesser General Public License for more details.
+ *
+ *  You should have received a copy of the GNU Lesser General Public
+ *  License along with this library; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ *  MA  02111-1307  USA
+ *
+ *
+ *  Sun Industry Standards Source License Version 1.1
+ *  =================================================
+ *  The contents of this file are subject to the Sun Industry Standards
+ *  Source License Version 1.1 (the "License"); You may not use this file
+ *  except in compliance with the License. You may obtain a copy of the
+ *  License at http://www.openoffice.org/license.html.
+ *
+ *  Software provided under this License is provided on an "AS IS" basis,
+ *  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
+ *  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
+ *  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
+ *  See the License for the specific provisions governing your rights and
+ *  obligations concerning the Software.
+ *
+ *  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
+ *
+ *  Copyright: 2000 by Sun Microsystems, Inc.
+ *
+ *  All Rights Reserved.
+ *
+ *  Contributor(s): _______________________________________
+ *
+ *
+ ************************************************************************/
+
+package mod._svx;
+
+import com.sun.star.beans.XPropertySet;
+import com.sun.star.drawing.XShape;
+import com.sun.star.lang.XComponent;
+import com.sun.star.style.XStyle;
+import com.sun.star.uno.UnoRuntime;
+import com.sun.star.uno.XInterface;
+import java.io.PrintWriter;
+import lib.StatusException;
+import lib.TestCase;
+import lib.TestEnvironment;
+import lib.TestParameters;
+import util.DefaultDsc;
+import util.DrawTools;
+import util.InstCreator;
+import util.SOfficeFactory;
+
+public class SvxShapeDimensioning extends TestCase {
+
+    XComponent xDrawDoc;
+
+    /**
+     * in general this method creates a testdocument
+     *
+     *  @param tParam    class which contains additional test parameters
+     *  @param log        class to log the test state and result
+     *
+     *
+     *  @see TestParameters
+     *    @see PrintWriter
+     *
+     */
+    protected void initialize( TestParameters tParam, PrintWriter log ) {
+
+        try {
+            log.println( "creating a drawdoc" );
+            xDrawDoc = DrawTools.createDrawDoc(tParam.getMSF());
+        } catch ( Exception e ) {
+            // Some exception occures.FAILED
+            e.printStackTrace( log );
+            throw new StatusException( "Couldn't create document", e );
+        }
+    }
+
+    /**
+     * in general this method disposes the testenvironment and document
+     *
+     *  @param tParam    class which contains additional test parameters
+     *  @param log        class to log the test state and result
+     *
+     *
+     *  @see TestParameters
+     *    @see PrintWriter
+     *
+     */
+    protected void cleanup( TestParameters tParam, PrintWriter log ) {
+        log.println( "    disposing xDrawDoc " );
+        xDrawDoc.dispose();
+    }
+
+
+    /**
+     *    creating a Testenvironment for the interfaces to be tested
+     *
+     *  @param tParam    class which contains additional test parameters
+     *  @param log        class to log the test state and result
+     *
+     *  @return    Status class
+     *
+     *  @see TestParameters
+     *    @see PrintWriter
+     */
+    public TestEnvironment createTestEnvironment( TestParameters tParam,
+                                                  PrintWriter log )
+                                                    throws StatusException {
+
+        XInterface oObj = null;
+        XShape oShape = null;
+
+        // creation of testobject here
+        // first we write what we are intend to do to log file
+        log.println( "creating a test environment" );
+
+        try {
+
+            SOfficeFactory SOF = SOfficeFactory.getFactory( tParam.getMSF());
+              oShape = SOF.createShape(xDrawDoc,4000,4000,3000,3000,"Measure");
+
+              XPropertySet xProps = (XPropertySet) UnoRuntime.queryInterface(
+                  XPropertySet.class, oShape) ;
+
+              //xProps.setPropertyValue("LineStart",
+              //  new Point[] {new Point(3000, 3000)}) ;
+              //xProps.setPropertyValue("LineEnd",
+              //  new Point[] {new Point(5000, 6000)}) ;
+
+            DrawTools.getShapes(DrawTools.getDrawPage(xDrawDoc,0)).add(oShape);
+
+            for (int i=0;i<10;i++) {
+                DrawTools.getShapes(DrawTools.getDrawPage(xDrawDoc,0)).add(
+                    SOF.createShape(xDrawDoc,
+                    3000,4500,7510+10*i,5010+10*i,"Rectangle"));
+            }
+
+            oObj = oShape ;
+
+            //SOfficeFactory SOF = SOfficeFactory.getFactory(tParam.getMSF()) ;
+            oShape = SOF.createShape(xDrawDoc,5000,3500,7500,5000,"Line");
+            DrawTools.getShapes(DrawTools.getDrawPage(xDrawDoc,0)).add(oShape) ;
+        }
+        catch (Exception e) {
+            log.println("Couldn't create insance");
+            e.printStackTrace(log);
+        }
+
+        // test environment creation
+
+         TestEnvironment tEnv = new TestEnvironment(oObj);
+
+        log.println( "adding two styles as ObjRelation for ShapeDescriptor" );
+        XPropertySet oShapeProps = (XPropertySet)
+                            UnoRuntime.queryInterface(XPropertySet.class,oObj);
+        XStyle aStyle = null;
+        try {
+            aStyle = (XStyle) oShapeProps.getPropertyValue("Style");
+        } catch (Exception e) {}
+        tEnv.addObjRelation("Style1",aStyle);
+        oShapeProps = (XPropertySet)
+            UnoRuntime.queryInterface(XPropertySet.class,oShape);
+        try {
+            aStyle = (XStyle) oShapeProps.getPropertyValue("Style");
+        } catch (Exception e) {}
+        tEnv.addObjRelation("Style2",aStyle);
+
+        DefaultDsc tDsc = new DefaultDsc("com.sun.star.text.XTextContent",
+                                            "com.sun.star.text.TextField.URL");
+        log.println( "    adding InstCreator object" );
+        tEnv.addObjRelation( "XTEXTINFO", new InstCreator( xDrawDoc, tDsc ) );
+
+        return tEnv;
+    } // finish method getTestEnvironment
+
+}    // finish class SvxShapeDimensioning
+