diff options
Diffstat (limited to 'svx/source/svdraw/svdoedge.cxx')
| -rw-r--r-- | svx/source/svdraw/svdoedge.cxx | 484 |
1 files changed, 242 insertions, 242 deletions
diff --git a/svx/source/svdraw/svdoedge.cxx b/svx/source/svdraw/svdoedge.cxx index c7bbc5fab761..f0857b8d9e9b 100644 --- a/svx/source/svdraw/svdoedge.cxx +++ b/svx/source/svdraw/svdoedge.cxx @@ -68,31 +68,31 @@ void SdrObjConnection::ResetVars() nConId=0; nXDist=0; nYDist=0; - bBestConn=TRUE; - bBestVertex=TRUE; - bXDistOvr=FALSE; - bYDistOvr=FALSE; - bAutoVertex=FALSE; - bAutoCorner=FALSE; + bBestConn=sal_True; + bBestVertex=sal_True; + bXDistOvr=sal_False; + bYDistOvr=sal_False; + bAutoVertex=sal_False; + bAutoCorner=sal_False; } -FASTBOOL SdrObjConnection::TakeGluePoint(SdrGluePoint& rGP, FASTBOOL bSetAbsPos) const +int SdrObjConnection::TakeGluePoint(SdrGluePoint& rGP, int bSetAbsPos) const { - FASTBOOL bRet=FALSE; + int bRet=sal_False; if (pObj!=NULL) { // Ein Obj muss schon angedockt sein! if (bAutoVertex) { rGP=pObj->GetVertexGluePoint(nConId); - bRet=TRUE; + bRet=sal_True; } else if (bAutoCorner) { rGP=pObj->GetCornerGluePoint(nConId); - bRet=TRUE; + bRet=sal_True; } else { const SdrGluePointList* pGPL=pObj->GetGluePointList(); if (pGPL!=NULL) { - USHORT nNum=pGPL->FindGluePoint(nConId); + sal_uInt16 nNum=pGPL->FindGluePoint(nConId); if (nNum!=SDRGLUEPOINT_NOTFOUND) { rGP=(*pGPL)[nNum]; - bRet=TRUE; + bRet=sal_True; } } } @@ -117,7 +117,7 @@ Point& SdrEdgeInfoRec::ImpGetLineVersatzPoint(SdrEdgeLineCode eLineCode) return aMiddleLine; } -USHORT SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const +sal_uInt16 SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const { switch (eLineCode) { case OBJ1LINE2 : return 1; @@ -129,10 +129,10 @@ USHORT SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolygon& return 0; } -FASTBOOL SdrEdgeInfoRec::ImpIsHorzLine(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const +int SdrEdgeInfoRec::ImpIsHorzLine(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const { - USHORT nIdx=ImpGetPolyIdx(eLineCode,rXP); - FASTBOOL bHorz=nAngle1==0 || nAngle1==18000; + sal_uInt16 nIdx=ImpGetPolyIdx(eLineCode,rXP); + int bHorz=nAngle1==0 || nAngle1==18000; if (eLineCode==OBJ2LINE2 || eLineCode==OBJ2LINE3) { nIdx=rXP.GetPointCount()-nIdx; // #36314# bHorz=nAngle2==0 || nAngle2==18000; // #52000# @@ -185,16 +185,16 @@ SdrEdgeObj::SdrEdgeObj() // #110649# mbBoundRectCalculationRunning(sal_False) { - bClosedObj=FALSE; - bIsEdge=TRUE; + bClosedObj=sal_False; + bIsEdge=sal_True; pEdgeTrack=new XPolygon; } SdrEdgeObj::~SdrEdgeObj() { - DisconnectFromNode(TRUE); - DisconnectFromNode(FALSE); + DisconnectFromNode(sal_True); + DisconnectFromNode(sal_False); delete pEdgeTrack; } @@ -243,8 +243,8 @@ void SdrEdgeObj::ImpSetAttrToEdgeInfo() } else if(eKind == SDREDGE_THREELINES) { - BOOL bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000; - BOOL bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000; + sal_Bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000; + sal_Bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000; if(bHor1) { @@ -314,8 +314,8 @@ void SdrEdgeObj::ImpSetEdgeInfoToAttr() } else if(eKind == SDREDGE_THREELINES) { - BOOL bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000; - BOOL bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000; + sal_Bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000; + sal_Bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000; n = 2; nVals[0] = bHor1 ? aEdgeInfo.aObj1Line2.X() : aEdgeInfo.aObj1Line2.Y(); @@ -364,24 +364,24 @@ void SdrEdgeObj::ImpSetEdgeInfoToAttr() void SdrEdgeObj::TakeObjInfo(SdrObjTransformInfoRec& rInfo) const { - rInfo.bRotateFreeAllowed=FALSE; - rInfo.bRotate90Allowed =FALSE; - rInfo.bMirrorFreeAllowed=FALSE; - rInfo.bMirror45Allowed =FALSE; - rInfo.bMirror90Allowed =FALSE; - rInfo.bTransparenceAllowed = FALSE; - rInfo.bGradientAllowed = FALSE; - rInfo.bShearAllowed =FALSE; - rInfo.bEdgeRadiusAllowed=FALSE; - FASTBOOL bCanConv=!HasText() || ImpCanConvTextToCurve(); + rInfo.bRotateFreeAllowed=sal_False; + rInfo.bRotate90Allowed =sal_False; + rInfo.bMirrorFreeAllowed=sal_False; + rInfo.bMirror45Allowed =sal_False; + rInfo.bMirror90Allowed =sal_False; + rInfo.bTransparenceAllowed = sal_False; + rInfo.bGradientAllowed = sal_False; + rInfo.bShearAllowed =sal_False; + rInfo.bEdgeRadiusAllowed=sal_False; + int bCanConv=!HasText() || ImpCanConvTextToCurve(); rInfo.bCanConvToPath=bCanConv; rInfo.bCanConvToPoly=bCanConv; rInfo.bCanConvToContour = (rInfo.bCanConvToPoly || LineGeometryUsageIsNecessary()); } -UINT16 SdrEdgeObj::GetObjIdentifier() const +sal_uInt16 SdrEdgeObj::GetObjIdentifier() const { - return UINT16(OBJ_EDGE); + return sal_uInt16(OBJ_EDGE); } const Rectangle& SdrEdgeObj::GetCurrentBoundRect() const @@ -414,20 +414,20 @@ void SdrEdgeObj::TakeUnrotatedSnapRect(Rectangle& rRect) const rRect=GetSnapRect(); } -FASTBOOL SdrEdgeObj::IsNode() const +int SdrEdgeObj::IsNode() const { - return TRUE; + return sal_True; } -SdrGluePoint SdrEdgeObj::GetVertexGluePoint(USHORT nNum) const +SdrGluePoint SdrEdgeObj::GetVertexGluePoint(sal_uInt16 nNum) const { Point aPt; - USHORT nPntAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nPntAnz=pEdgeTrack->GetPointCount(); if (nPntAnz>0) { Point aOfs = GetSnapRect().Center(); - if (nNum==2 && GetConnectedNode(TRUE)==NULL) aPt=(*pEdgeTrack)[0]; - else if (nNum==3 && GetConnectedNode(FALSE)==NULL) aPt=(*pEdgeTrack)[nPntAnz-1]; + if (nNum==2 && GetConnectedNode(sal_True)==NULL) aPt=(*pEdgeTrack)[0]; + else if (nNum==3 && GetConnectedNode(sal_False)==NULL) aPt=(*pEdgeTrack)[nPntAnz-1]; else { if ((nPntAnz & 1) ==1) { aPt=(*pEdgeTrack)[nPntAnz/2]; @@ -443,11 +443,11 @@ SdrGluePoint SdrEdgeObj::GetVertexGluePoint(USHORT nNum) const aPt-=aOfs; } SdrGluePoint aGP(aPt); - aGP.SetPercent(FALSE); + aGP.SetPercent(sal_False); return aGP; } -SdrGluePoint SdrEdgeObj::GetCornerGluePoint(USHORT nNum) const +SdrGluePoint SdrEdgeObj::GetCornerGluePoint(sal_uInt16 nNum) const { return GetVertexGluePoint(nNum); } @@ -462,12 +462,12 @@ SdrGluePointList* SdrEdgeObj::ForceGluePointList() return NULL; // Keine benutzerdefinierten Klebepunkte fuer Verbinder #31671# } -FASTBOOL SdrEdgeObj::IsEdge() const +int SdrEdgeObj::IsEdge() const { - return TRUE; + return sal_True; } -void SdrEdgeObj::ConnectToNode(FASTBOOL bTail1, SdrObject* pObj) +void SdrEdgeObj::ConnectToNode(int bTail1, SdrObject* pObj) { SdrObjConnection& rCon=GetConnection(bTail1); DisconnectFromNode(bTail1); @@ -478,7 +478,7 @@ void SdrEdgeObj::ConnectToNode(FASTBOOL bTail1, SdrObject* pObj) } } -void SdrEdgeObj::DisconnectFromNode(FASTBOOL bTail1) +void SdrEdgeObj::DisconnectFromNode(int bTail1) { SdrObjConnection& rCon=GetConnection(bTail1); if (rCon.pObj!=NULL) { @@ -487,24 +487,24 @@ void SdrEdgeObj::DisconnectFromNode(FASTBOOL bTail1) } } -SdrObject* SdrEdgeObj::GetConnectedNode(FASTBOOL bTail1) const +SdrObject* SdrEdgeObj::GetConnectedNode(int bTail1) const { SdrObject* pObj=GetConnection(bTail1).pObj; if (pObj!=NULL && (pObj->GetPage()!=pPage || !pObj->IsInserted())) pObj=NULL; return pObj; } -FASTBOOL SdrEdgeObj::CheckNodeConnection(FASTBOOL bTail1) const +int SdrEdgeObj::CheckNodeConnection(int bTail1) const { - FASTBOOL bRet=FALSE; + int bRet=sal_False; const SdrObjConnection& rCon=GetConnection(bTail1); - USHORT nPtAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nPtAnz=pEdgeTrack->GetPointCount(); if (rCon.pObj!=NULL && rCon.pObj->GetPage()==pPage && nPtAnz!=0) { const SdrGluePointList* pGPL=rCon.pObj->GetGluePointList(); - USHORT nConAnz=pGPL==NULL ? 0 : pGPL->GetCount(); - USHORT nGesAnz=nConAnz+8; - Point aTail(bTail1 ? (*pEdgeTrack)[0] : (*pEdgeTrack)[USHORT(nPtAnz-1)]); - for (USHORT i=0; i<nGesAnz && !bRet; i++) { + sal_uInt16 nConAnz=pGPL==NULL ? 0 : pGPL->GetCount(); + sal_uInt16 nGesAnz=nConAnz+8; + Point aTail(bTail1 ? (*pEdgeTrack)[0] : (*pEdgeTrack)[sal_uInt16(nPtAnz-1)]); + for (sal_uInt16 i=0; i<nGesAnz && !bRet; i++) { if (i<nConAnz) { // UserDefined bRet=aTail==(*pGPL)[i].GetAbsolutePos(*rCon.pObj); } else if (i<nConAnz+4) { // Vertex @@ -519,9 +519,9 @@ FASTBOOL SdrEdgeObj::CheckNodeConnection(FASTBOOL bTail1) const return bRet; } -void SdrEdgeObj::ImpSetTailPoint(FASTBOOL bTail1, const Point& rPt) +void SdrEdgeObj::ImpSetTailPoint(int bTail1, const Point& rPt) { - USHORT nPtAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nPtAnz=pEdgeTrack->GetPointCount(); if (nPtAnz==0) { (*pEdgeTrack)[0]=rPt; (*pEdgeTrack)[1]=rPt; @@ -529,7 +529,7 @@ void SdrEdgeObj::ImpSetTailPoint(FASTBOOL bTail1, const Point& rPt) if (!bTail1) (*pEdgeTrack)[1]=rPt; else { (*pEdgeTrack)[1]=(*pEdgeTrack)[0]; (*pEdgeTrack)[0]=rPt; } } else { - if (!bTail1) (*pEdgeTrack)[USHORT(nPtAnz-1)]=rPt; + if (!bTail1) (*pEdgeTrack)[sal_uInt16(nPtAnz-1)]=rPt; else (*pEdgeTrack)[0]=rPt; } ImpRecalcEdgeTrack(); @@ -597,7 +597,7 @@ void SdrEdgeObj::ImpRecalcEdgeTrack() } } -USHORT SdrEdgeObj::ImpCalcEscAngle(SdrObject* pObj, const Point& rPt) const +sal_uInt16 SdrEdgeObj::ImpCalcEscAngle(SdrObject* pObj, const Point& rPt) const { if (pObj==NULL) return SDRESC_ALL; Rectangle aR(pObj->GetSnapRect()); @@ -605,14 +605,14 @@ USHORT SdrEdgeObj::ImpCalcEscAngle(SdrObject* pObj, const Point& rPt) const long dyo=rPt.Y()-aR.Top(); long dxr=aR.Right()-rPt.X(); long dyu=aR.Bottom()-rPt.Y(); - FASTBOOL bxMitt=Abs(dxl-dxr)<2; - FASTBOOL byMitt=Abs(dyo-dyu)<2; + int bxMitt=Abs(dxl-dxr)<2; + int byMitt=Abs(dyo-dyu)<2; long dx=Min(dxl,dxr); long dy=Min(dyo,dyu); - FASTBOOL bDiag=Abs(dx-dy)<2; + int bDiag=Abs(dx-dy)<2; if (bxMitt && byMitt) return SDRESC_ALL; // In der Mitte if (bDiag) { // diagonal - USHORT nRet=0; + sal_uInt16 nRet=0; if (byMitt) nRet|=SDRESC_VERT; if (bxMitt) nRet|=SDRESC_HORZ; if (dxl<dxr) { // Links @@ -635,20 +635,20 @@ USHORT SdrEdgeObj::ImpCalcEscAngle(SdrObject* pObj, const Point& rPt) const } } -FASTBOOL SdrEdgeObj::ImpStripPolyPoints(XPolygon& /*rXP*/) const +int SdrEdgeObj::ImpStripPolyPoints(XPolygon& /*rXP*/) const { // fehlende Implementation !!! - return FALSE; + return sal_False; } XPolygon SdrEdgeObj::ImpCalcObjToCenter(const Point& rStPt, long nEscAngle, const Rectangle& rRect, const Point& rMeeting) const { XPolygon aXP; aXP.Insert(XPOLY_APPEND,rStPt,XPOLY_NORMAL); - FASTBOOL bRts=nEscAngle==0; - FASTBOOL bObn=nEscAngle==9000; - FASTBOOL bLks=nEscAngle==18000; - FASTBOOL bUnt=nEscAngle==27000; + int bRts=nEscAngle==0; + int bObn=nEscAngle==9000; + int bLks=nEscAngle==18000; + int bUnt=nEscAngle==27000; Point aP1(rStPt); // erstmal den Pflichtabstand if (bLks) aP1.X()=rRect.Left(); @@ -656,7 +656,7 @@ XPolygon SdrEdgeObj::ImpCalcObjToCenter(const Point& rStPt, long nEscAngle, cons if (bObn) aP1.Y()=rRect.Top(); if (bUnt) aP1.Y()=rRect.Bottom(); - FASTBOOL bFinish=FALSE; + int bFinish=sal_False; if (!bFinish) { Point aP2(aP1); // Und nun den Pflichtabstand ggf. bis auf Meetinghoehe erweitern if (bLks && rMeeting.X()<=aP2.X()) aP2.X()=rMeeting.X(); @@ -707,7 +707,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& { Point aPt1,aPt2; SdrGluePoint aGP1,aGP2; - USHORT nEsc1=SDRESC_ALL,nEsc2=SDRESC_ALL; + sal_uInt16 nEsc1=SDRESC_ALL,nEsc2=SDRESC_ALL; Rectangle aBoundRect1; Rectangle aBoundRect2; Rectangle aBewareRect1; @@ -715,7 +715,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& // Erstmal die alten Endpunkte wiederholen if (rTrack0.GetPointCount()!=0) { aPt1=rTrack0[0]; - USHORT nSiz=rTrack0.GetPointCount(); + sal_uInt16 nSiz=rTrack0.GetPointCount(); nSiz--; aPt2=rTrack0[nSiz]; } else { @@ -724,8 +724,8 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& aPt2=aOutRect.BottomRight(); } } - FASTBOOL bCon1=rCon1.pObj!=NULL && rCon1.pObj->GetPage()==pPage && rCon1.pObj->IsInserted(); - FASTBOOL bCon2=rCon2.pObj!=NULL && rCon2.pObj->GetPage()==pPage && rCon2.pObj->IsInserted(); + int bCon1=rCon1.pObj!=NULL && rCon1.pObj->GetPage()==pPage && rCon1.pObj->IsInserted(); + int bCon2=rCon2.pObj!=NULL && rCon2.pObj->GetPage()==pPage && rCon2.pObj->IsInserted(); const SfxItemSet& rSet = GetObjectItemSet(); if (bCon1) { @@ -777,36 +777,36 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& aBewareRect2=aBoundRect2; } XPolygon aBestXP; - ULONG nBestQual=0xFFFFFFFF; + sal_uIntPtr nBestQual=0xFFFFFFFF; SdrEdgeInfoRec aBestInfo; - FASTBOOL bAuto1=bCon1 && rCon1.bBestVertex; - FASTBOOL bAuto2=bCon2 && rCon2.bBestVertex; - if (bAuto1) rCon1.bAutoVertex=TRUE; - if (bAuto2) rCon2.bAutoVertex=TRUE; - USHORT nBestAuto1=0; - USHORT nBestAuto2=0; - USHORT nAnz1=bAuto1 ? 4 : 1; - USHORT nAnz2=bAuto2 ? 4 : 1; - for (USHORT nNum1=0; nNum1<nAnz1; nNum1++) { + int bAuto1=bCon1 && rCon1.bBestVertex; + int bAuto2=bCon2 && rCon2.bBestVertex; + if (bAuto1) rCon1.bAutoVertex=sal_True; + if (bAuto2) rCon2.bAutoVertex=sal_True; + sal_uInt16 nBestAuto1=0; + sal_uInt16 nBestAuto2=0; + sal_uInt16 nAnz1=bAuto1 ? 4 : 1; + sal_uInt16 nAnz2=bAuto2 ? 4 : 1; + for (sal_uInt16 nNum1=0; nNum1<nAnz1; nNum1++) { if (bAuto1) rCon1.nConId=nNum1; - if (bCon1 && rCon1.TakeGluePoint(aGP1,TRUE)) { + if (bCon1 && rCon1.TakeGluePoint(aGP1,sal_True)) { aPt1=aGP1.GetPos(); nEsc1=aGP1.GetEscDir(); if (nEsc1==SDRESC_SMART) nEsc1=ImpCalcEscAngle(rCon1.pObj,aPt1-rCon1.aObjOfs); } - for (USHORT nNum2=0; nNum2<nAnz2; nNum2++) { + for (sal_uInt16 nNum2=0; nNum2<nAnz2; nNum2++) { if (bAuto2) rCon2.nConId=nNum2; - if (bCon2 && rCon2.TakeGluePoint(aGP2,TRUE)) { + if (bCon2 && rCon2.TakeGluePoint(aGP2,sal_True)) { aPt2=aGP2.GetPos(); nEsc2=aGP2.GetEscDir(); if (nEsc2==SDRESC_SMART) nEsc2=ImpCalcEscAngle(rCon2.pObj,aPt2-rCon2.aObjOfs); } for (long nA1=0; nA1<36000; nA1+=9000) { - USHORT nE1=nA1==0 ? SDRESC_RIGHT : nA1==9000 ? SDRESC_TOP : nA1==18000 ? SDRESC_LEFT : nA1==27000 ? SDRESC_BOTTOM : 0; + sal_uInt16 nE1=nA1==0 ? SDRESC_RIGHT : nA1==9000 ? SDRESC_TOP : nA1==18000 ? SDRESC_LEFT : nA1==27000 ? SDRESC_BOTTOM : 0; for (long nA2=0; nA2<36000; nA2+=9000) { - USHORT nE2=nA2==0 ? SDRESC_RIGHT : nA2==9000 ? SDRESC_TOP : nA2==18000 ? SDRESC_LEFT : nA2==27000 ? SDRESC_BOTTOM : 0; + sal_uInt16 nE2=nA2==0 ? SDRESC_RIGHT : nA2==9000 ? SDRESC_TOP : nA2==18000 ? SDRESC_LEFT : nA2==27000 ? SDRESC_BOTTOM : 0; if ((nEsc1&nE1)!=0 && (nEsc2&nE2)!=0) { - ULONG nQual=0; + sal_uIntPtr nQual=0; SdrEdgeInfoRec aInfo; if (pInfo!=NULL) aInfo=*pInfo; XPolygon aXP(ImpCalcEdgeTrack(aPt1,nA1,aBoundRect1,aBewareRect1,aPt2,nA2,aBoundRect2,aBewareRect2,&nQual,&aInfo)); @@ -830,22 +830,22 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const XPolygon& rTrack0, SdrObjConnection& XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rectangle& rBoundRect1, const Rectangle& rBewareRect1, const Point& rPt2, long nAngle2, const Rectangle& rBoundRect2, const Rectangle& rBewareRect2, - ULONG* pnQuality, SdrEdgeInfoRec* pInfo) const + sal_uIntPtr* pnQuality, SdrEdgeInfoRec* pInfo) const { SdrEdgeKind eKind=((SdrEdgeKindItem&)(GetObjectItem(SDRATTR_EDGEKIND))).GetValue(); - FASTBOOL bRts1=nAngle1==0; - FASTBOOL bObn1=nAngle1==9000; - FASTBOOL bLks1=nAngle1==18000; - FASTBOOL bUnt1=nAngle1==27000; - FASTBOOL bHor1=bLks1 || bRts1; - FASTBOOL bVer1=bObn1 || bUnt1; - FASTBOOL bRts2=nAngle2==0; - FASTBOOL bObn2=nAngle2==9000; - FASTBOOL bLks2=nAngle2==18000; - FASTBOOL bUnt2=nAngle2==27000; - FASTBOOL bHor2=bLks2 || bRts2; - FASTBOOL bVer2=bObn2 || bUnt2; - FASTBOOL bInfo=pInfo!=NULL; + int bRts1=nAngle1==0; + int bObn1=nAngle1==9000; + int bLks1=nAngle1==18000; + int bUnt1=nAngle1==27000; + int bHor1=bLks1 || bRts1; + int bVer1=bObn1 || bUnt1; + int bRts2=nAngle2==0; + int bObn2=nAngle2==9000; + int bLks2=nAngle2==18000; + int bUnt2=nAngle2==27000; + int bHor2=bLks2 || bRts2; + int bVer2=bObn2 || bUnt2; + int bInfo=pInfo!=NULL; if (bInfo) { pInfo->cOrthoForm=0; pInfo->nAngle1=nAngle1; @@ -861,8 +861,8 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec Rectangle aBewareRect1(rBewareRect1); Rectangle aBewareRect2(rBewareRect2); Point aMeeting((aPt1.X()+aPt2.X()+1)/2,(aPt1.Y()+aPt2.Y()+1)/2); - FASTBOOL bMeetingXMid=TRUE; - FASTBOOL bMeetingYMid=TRUE; + int bMeetingXMid=sal_True; + int bMeetingYMid=sal_True; if (eKind==SDREDGE_ONELINE) { XPolygon aXP(2); aXP[0]=rPt1; @@ -907,8 +907,8 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } return aXP; } - USHORT nIntersections=0; - FASTBOOL bForceMeeting=FALSE; // Muss die Linie durch den MeetingPoint laufen? + sal_uInt16 nIntersections=0; + int bForceMeeting=sal_False; // Muss die Linie durch den MeetingPoint laufen? { Point aC1(aBewareRect1.Center()); Point aC2(aBewareRect2.Center()); @@ -946,9 +946,9 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec long nXMax=Max(aBewareRect1.Right(),aBewareRect2.Right()); long nYMin=Min(aBewareRect1.Top(),aBewareRect2.Top()); long nYMax=Max(aBewareRect1.Bottom(),aBewareRect2.Bottom()); - //FASTBOOL bBoundOverlap=aBoundRect1.Right()>aBoundRect2.Left() && aBoundRect1.Left()<aBoundRect2.Right() && + //int bBoundOverlap=aBoundRect1.Right()>aBoundRect2.Left() && aBoundRect1.Left()<aBoundRect2.Right() && aBoundRect1.Bottom()>aBoundRect2.Top() && aBoundRect1.Top()<aBoundRect2.Bottom(); - FASTBOOL bBewareOverlap=aBewareRect1.Right()>aBewareRect2.Left() && aBewareRect1.Left()<aBewareRect2.Right() && + int bBewareOverlap=aBewareRect1.Right()>aBewareRect2.Left() && aBewareRect1.Left()<aBewareRect2.Right() && aBewareRect1.Bottom()>aBewareRect2.Top() && aBewareRect1.Top()<aBewareRect2.Bottom(); unsigned nMainCase=3; if (nAngle1==nAngle2) nMainCase=1; @@ -957,29 +957,29 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec if (bVer1) aMeeting.X()=(aPt1.X()+aPt2.X()+1)/2; // ist hier besser, als der if (bHor1) aMeeting.Y()=(aPt1.Y()+aPt2.Y()+1)/2; // Mittelpunkt des Freiraums // bX1Ok bedeutet, dass die Vertikale, die aus Obj1 austritt, keinen Konflikt mit Obj2 bildet, ... - FASTBOOL bX1Ok=aPt1.X()<=aBewareRect2.Left() || aPt1.X()>=aBewareRect2.Right(); - FASTBOOL bX2Ok=aPt2.X()<=aBewareRect1.Left() || aPt2.X()>=aBewareRect1.Right(); - FASTBOOL bY1Ok=aPt1.Y()<=aBewareRect2.Top() || aPt1.Y()>=aBewareRect2.Bottom(); - FASTBOOL bY2Ok=aPt2.Y()<=aBewareRect1.Top() || aPt2.Y()>=aBewareRect1.Bottom(); + int bX1Ok=aPt1.X()<=aBewareRect2.Left() || aPt1.X()>=aBewareRect2.Right(); + int bX2Ok=aPt2.X()<=aBewareRect1.Left() || aPt2.X()>=aBewareRect1.Right(); + int bY1Ok=aPt1.Y()<=aBewareRect2.Top() || aPt1.Y()>=aBewareRect2.Bottom(); + int bY2Ok=aPt2.Y()<=aBewareRect1.Top() || aPt2.Y()>=aBewareRect1.Bottom(); if (bLks1 && (bY1Ok || aBewareRect1.Left()<aBewareRect2.Right()) && (bY2Ok || aBewareRect2.Left()<aBewareRect1.Right())) { aMeeting.X()=nXMin; - bMeetingXMid=FALSE; + bMeetingXMid=sal_False; } if (bRts1 && (bY1Ok || aBewareRect1.Right()>aBewareRect2.Left()) && (bY2Ok || aBewareRect2.Right()>aBewareRect1.Left())) { aMeeting.X()=nXMax; - bMeetingXMid=FALSE; + bMeetingXMid=sal_False; } if (bObn1 && (bX1Ok || aBewareRect1.Top()<aBewareRect2.Bottom()) && (bX2Ok || aBewareRect2.Top()<aBewareRect1.Bottom())) { aMeeting.Y()=nYMin; - bMeetingYMid=FALSE; + bMeetingYMid=sal_False; } if (bUnt1 && (bX1Ok || aBewareRect1.Bottom()>aBewareRect2.Top()) && (bX2Ok || aBewareRect2.Bottom()>aBewareRect1.Top())) { aMeeting.Y()=nYMax; - bMeetingYMid=FALSE; + bMeetingYMid=sal_False; } } else if (nMainCase==2) { // Fall 2: - bForceMeeting=TRUE; + bForceMeeting=sal_True; if (bHor1) { // beide waagerecht /* 9 Moeglichkeiten: */ /* 2.1 Gegenueber, Ueberschneidung */ @@ -1014,27 +1014,27 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec // Ueberschneidung auf der Y-Achse. Faelle 2.1, 2.8, 2.9 if (aBewR1.Right()>aBewR2.Left()) { // Faelle 2.8, 2.9 - // Fall 2.8 ist immer Aussenrumlauf (bDirect=FALSE). + // Fall 2.8 ist immer Aussenrumlauf (bDirect=sal_False). // Fall 2.9 kann auch Direktverbindung sein (bei geringer // Ueberschneidung der BewareRects ohne Ueberschneidung der // Boundrects wenn die Linienaustritte sonst das BewareRect // des jeweils anderen Objekts verletzen wuerden. - FASTBOOL bCase29Direct=FALSE; - FASTBOOL bCase29=aBewR1.Right()>aBewR2.Left(); + int bCase29Direct=sal_False; + int bCase29=aBewR1.Right()>aBewR2.Left(); if (aBndR1.Right()<=aBndR2.Left()) { // Fall 2.9 und keine Boundrectueberschneidung if ((aPt1.Y()>aBewareRect2.Top() && aPt1.Y()<aBewareRect2.Bottom()) || (aPt2.Y()>aBewareRect1.Top() && aPt2.Y()<aBewareRect1.Bottom())) { - bCase29Direct=TRUE; + bCase29Direct=sal_True; } } if (!bCase29Direct) { - FASTBOOL bObenLang=Abs(nYMin-aMeeting.Y())<=Abs(nYMax-aMeeting.Y()); + int bObenLang=Abs(nYMin-aMeeting.Y())<=Abs(nYMax-aMeeting.Y()); if (bObenLang) { aMeeting.Y()=nYMin; } else { aMeeting.Y()=nYMax; } - bMeetingYMid=FALSE; + bMeetingYMid=sal_False; if (bCase29) { // und nun noch dafuer sorgen, dass das // umzingelte Obj nicht durchquert wird @@ -1043,7 +1043,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } else { aMeeting.X()=aBewR1.Left(); } - bMeetingXMid=FALSE; + bMeetingXMid=sal_False; } } else { // Direkte Verbindung (3-Linien Z-Verbindung), da @@ -1074,27 +1074,27 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec // Ueberschneidung auf der Y-Achse. Faelle 2.1, 2.8, 2.9 if (aBewR1.Bottom()>aBewR2.Top()) { // Faelle 2.8, 2.9 - // Fall 2.8 ist immer Aussenrumlauf (bDirect=FALSE). + // Fall 2.8 ist immer Aussenrumlauf (bDirect=sal_False). // Fall 2.9 kann auch Direktverbindung sein (bei geringer // Ueberschneidung der BewareRects ohne Ueberschneidung der // Boundrects wenn die Linienaustritte sonst das BewareRect // des jeweils anderen Objekts verletzen wuerden. - FASTBOOL bCase29Direct=FALSE; - FASTBOOL bCase29=aBewR1.Bottom()>aBewR2.Top(); + int bCase29Direct=sal_False; + int bCase29=aBewR1.Bottom()>aBewR2.Top(); if (aBndR1.Bottom()<=aBndR2.Top()) { // Fall 2.9 und keine Boundrectueberschneidung if ((aPt1.X()>aBewareRect2.Left() && aPt1.X()<aBewareRect2.Right()) || (aPt2.X()>aBewareRect1.Left() && aPt2.X()<aBewareRect1.Right())) { - bCase29Direct=TRUE; + bCase29Direct=sal_True; } } if (!bCase29Direct) { - FASTBOOL bLinksLang=Abs(nXMin-aMeeting.X())<=Abs(nXMax-aMeeting.X()); + int bLinksLang=Abs(nXMin-aMeeting.X())<=Abs(nXMax-aMeeting.X()); if (bLinksLang) { aMeeting.X()=nXMin; } else { aMeeting.X()=nXMax; } - bMeetingXMid=FALSE; + bMeetingXMid=sal_False; if (bCase29) { // und nun noch dafuer sorgen, dass das // umzingelte Obj nicht durchquert wird @@ -1103,7 +1103,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } else { aMeeting.Y()=aBewR1.Top(); } - bMeetingYMid=FALSE; + bMeetingYMid=sal_False; } } else { // Direkte Verbindung (3-Linien Z-Verbindung), da @@ -1174,9 +1174,9 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec (((bRts2 && aTmpR2.Right ()<=aPt1.X()) || (bLks2 && aTmpR2.Left()>=aPt1.X())) && ((bUnt1 && aTmpR1.Bottom()<=aPt2.Y()) || (bObn1 && aTmpR1.Top ()>=aPt2.Y())))) { // Fall 3.2 trifft zu: Verbindung mit lediglich 2 Linien - bForceMeeting=TRUE; - bMeetingXMid=FALSE; - bMeetingYMid=FALSE; + bForceMeeting=sal_True; + bMeetingXMid=sal_False; + bMeetingYMid=sal_False; if (bHor1) { aMeeting.X()=aPt2.X(); aMeeting.Y()=aPt1.Y(); @@ -1196,34 +1196,34 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec ((bUnt1 && aBewareRect1.Bottom()>aBewareRect2.Top ()) || (bObn1 && aBewareRect1.Top ()<aBewareRect2.Bottom())))) { // Fall 3.3 - bForceMeeting=TRUE; - if (bRts1 || bRts2) { aMeeting.X()=nXMax; bMeetingXMid=FALSE; } - if (bLks1 || bLks2) { aMeeting.X()=nXMin; bMeetingXMid=FALSE; } - if (bUnt1 || bUnt2) { aMeeting.Y()=nYMax; bMeetingYMid=FALSE; } - if (bObn1 || bObn2) { aMeeting.Y()=nYMin; bMeetingYMid=FALSE; } + bForceMeeting=sal_True; + if (bRts1 || bRts2) { aMeeting.X()=nXMax; bMeetingXMid=sal_False; } + if (bLks1 || bLks2) { aMeeting.X()=nXMin; bMeetingXMid=sal_False; } + if (bUnt1 || bUnt2) { aMeeting.Y()=nYMax; bMeetingYMid=sal_False; } + if (bObn1 || bObn2) { aMeeting.Y()=nYMin; bMeetingYMid=sal_False; } } } } XPolygon aXP1(ImpCalcObjToCenter(aPt1,nAngle1,aBewareRect1,aMeeting)); XPolygon aXP2(ImpCalcObjToCenter(aPt2,nAngle2,aBewareRect2,aMeeting)); - USHORT nXP1Anz=aXP1.GetPointCount(); - USHORT nXP2Anz=aXP2.GetPointCount(); + sal_uInt16 nXP1Anz=aXP1.GetPointCount(); + sal_uInt16 nXP2Anz=aXP2.GetPointCount(); if (bInfo) { pInfo->nObj1Lines=nXP1Anz; if (nXP1Anz>1) pInfo->nObj1Lines--; pInfo->nObj2Lines=nXP2Anz; if (nXP2Anz>1) pInfo->nObj2Lines--; } Point aEP1(aXP1[nXP1Anz-1]); Point aEP2(aXP2[nXP2Anz-1]); - FASTBOOL bInsMeetingPoint=aEP1.X()!=aEP2.X() && aEP1.Y()!=aEP2.Y(); - FASTBOOL bHorzE1=aEP1.Y()==aXP1[nXP1Anz-2].Y(); // letzte Linie von XP1 horizontal? - FASTBOOL bHorzE2=aEP2.Y()==aXP2[nXP2Anz-2].Y(); // letzte Linie von XP2 horizontal? + int bInsMeetingPoint=aEP1.X()!=aEP2.X() && aEP1.Y()!=aEP2.Y(); + int bHorzE1=aEP1.Y()==aXP1[nXP1Anz-2].Y(); // letzte Linie von XP1 horizontal? + int bHorzE2=aEP2.Y()==aXP2[nXP2Anz-2].Y(); // letzte Linie von XP2 horizontal? if (aEP1==aEP2 && (bHorzE1 && bHorzE2 && aEP1.Y()==aEP2.Y()) || (!bHorzE1 && !bHorzE2 && aEP1.X()==aEP2.X())) { // Sonderbehandlung fuer 'I'-Verbinder nXP1Anz--; aXP1.Remove(nXP1Anz,1); nXP2Anz--; aXP2.Remove(nXP2Anz,1); - bMeetingXMid=FALSE; - bMeetingYMid=FALSE; + bMeetingXMid=sal_False; + bMeetingYMid=sal_False; } if (bInsMeetingPoint) { aXP1.Insert(XPOLY_APPEND,aMeeting,XPOLY_NORMAL); @@ -1248,13 +1248,13 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec // Dies wird die Mittellinie. pInfo->nMiddleLine=nXP1Anz-1; } - USHORT nNum=aXP2.GetPointCount(); + sal_uInt16 nNum=aXP2.GetPointCount(); if (aXP1[nXP1Anz-1]==aXP2[nXP2Anz-1] && nXP1Anz>1 && nXP2Anz>1) nNum--; while (nNum>0) { nNum--; aXP1.Insert(XPOLY_APPEND,aXP2[nNum],XPOLY_NORMAL); } - USHORT nPntAnz=aXP1.GetPointCount(); + sal_uInt16 nPntAnz=aXP1.GetPointCount(); char cForm=0; if (bInfo || pnQuality!=NULL) { cForm='?'; @@ -1301,26 +1301,26 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } } if (pnQuality!=NULL) { - ULONG nQual=0; - ULONG nQual0=nQual; // Ueberlaeufe vorbeugen - FASTBOOL bOverflow=FALSE; + sal_uIntPtr nQual=0; + sal_uIntPtr nQual0=nQual; // Ueberlaeufe vorbeugen + int bOverflow=sal_False; Point aPt0(aXP1[0]); - for (USHORT nPntNum=1; nPntNum<nPntAnz; nPntNum++) { + for (sal_uInt16 nPntNum=1; nPntNum<nPntAnz; nPntNum++) { Point aPt1b(aXP1[nPntNum]); nQual+=Abs(aPt1b.X()-aPt0.X())+Abs(aPt1b.Y()-aPt0.Y()); - if (nQual<nQual0) bOverflow=TRUE; + if (nQual<nQual0) bOverflow=sal_True; nQual0=nQual; aPt0=aPt1b; } - USHORT nTmp=nPntAnz; + sal_uInt16 nTmp=nPntAnz; if (cForm=='Z') { nTmp=2; // Z-Form hat gute Qualitaet (nTmp=2 statt 4) - ULONG n1=Abs(aXP1[1].X()-aXP1[0].X())+Abs(aXP1[1].Y()-aXP1[0].Y()); - ULONG n2=Abs(aXP1[2].X()-aXP1[1].X())+Abs(aXP1[2].Y()-aXP1[1].Y()); - ULONG n3=Abs(aXP1[3].X()-aXP1[2].X())+Abs(aXP1[3].Y()-aXP1[2].Y()); + sal_uIntPtr n1=Abs(aXP1[1].X()-aXP1[0].X())+Abs(aXP1[1].Y()-aXP1[0].Y()); + sal_uIntPtr n2=Abs(aXP1[2].X()-aXP1[1].X())+Abs(aXP1[2].Y()-aXP1[1].Y()); + sal_uIntPtr n3=Abs(aXP1[3].X()-aXP1[2].X())+Abs(aXP1[3].Y()-aXP1[2].Y()); // fuer moeglichst gleichlange Linien sorgen - ULONG nBesser=0; + sal_uIntPtr nBesser=0; n1+=n3; n3=n2/4; if (n1>=n2) nBesser=6; @@ -1331,8 +1331,8 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } if (nTmp>=3) { nQual0=nQual; - nQual+=(ULONG)nTmp*0x01000000; - if (nQual<nQual0 || nTmp>15) bOverflow=TRUE; + nQual+=(sal_uIntPtr)nTmp*0x01000000; + if (nQual<nQual0 || nTmp>15) bOverflow=sal_True; } if (nPntAnz>=2) { // Austrittswinkel nochmal pruefen Point aP1(aXP1[1]); aP1-=aXP1[0]; @@ -1351,13 +1351,13 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec aBewareRect1=rBewareRect1; aBewareRect2=rBewareRect2; - for (USHORT i=0; i<nPntAnz; i++) { + for (sal_uInt16 i=0; i<nPntAnz; i++) { Point aPt1b(aXP1[i]); - FASTBOOL b1=aPt1b.X()>aBewareRect1.Left() && aPt1b.X()<aBewareRect1.Right() && + int b1=aPt1b.X()>aBewareRect1.Left() && aPt1b.X()<aBewareRect1.Right() && aPt1b.Y()>aBewareRect1.Top() && aPt1b.Y()<aBewareRect1.Bottom(); - FASTBOOL b2=aPt1b.X()>aBewareRect2.Left() && aPt1b.X()<aBewareRect2.Right() && + int b2=aPt1b.X()>aBewareRect2.Left() && aPt1b.X()<aBewareRect2.Right() && aPt1b.Y()>aBewareRect2.Top() && aPt1b.Y()<aBewareRect2.Bottom(); - USHORT nInt0=nIntersections; + sal_uInt16 nInt0=nIntersections; if (i==0 || i==nPntAnz-1) { if (b1 && b2) nIntersections++; } else { @@ -1386,15 +1386,15 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } if (nPntAnz<=1) nIntersections++; nQual0=nQual; - nQual+=(ULONG)nIntersections*0x10000000; - if (nQual<nQual0 || nIntersections>15) bOverflow=TRUE; + nQual+=(sal_uIntPtr)nIntersections*0x10000000; + if (nQual<nQual0 || nIntersections>15) bOverflow=sal_True; if (bOverflow || nQual==0xFFFFFFFF) nQual=0xFFFFFFFE; *pnQuality=nQual; } if (bInfo) { // nun die Linienversaetze auf aXP1 anwenden if (pInfo->nMiddleLine!=0xFFFF) { - USHORT nIdx=pInfo->ImpGetPolyIdx(MIDDLELINE,aXP1); + sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(MIDDLELINE,aXP1); if (pInfo->ImpIsHorzLine(MIDDLELINE,aXP1)) { aXP1[nIdx].Y()+=pInfo->aMiddleLine.Y(); aXP1[nIdx+1].Y()+=pInfo->aMiddleLine.Y(); @@ -1404,7 +1404,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } } if (pInfo->nObj1Lines>=2) { - USHORT nIdx=pInfo->ImpGetPolyIdx(OBJ1LINE2,aXP1); + sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(OBJ1LINE2,aXP1); if (pInfo->ImpIsHorzLine(OBJ1LINE2,aXP1)) { aXP1[nIdx].Y()+=pInfo->aObj1Line2.Y(); aXP1[nIdx+1].Y()+=pInfo->aObj1Line2.Y(); @@ -1414,7 +1414,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } } if (pInfo->nObj1Lines>=3) { - USHORT nIdx=pInfo->ImpGetPolyIdx(OBJ1LINE3,aXP1); + sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(OBJ1LINE3,aXP1); if (pInfo->ImpIsHorzLine(OBJ1LINE3,aXP1)) { aXP1[nIdx].Y()+=pInfo->aObj1Line3.Y(); aXP1[nIdx+1].Y()+=pInfo->aObj1Line3.Y(); @@ -1424,7 +1424,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } } if (pInfo->nObj2Lines>=2) { - USHORT nIdx=pInfo->ImpGetPolyIdx(OBJ2LINE2,aXP1); + sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(OBJ2LINE2,aXP1); if (pInfo->ImpIsHorzLine(OBJ2LINE2,aXP1)) { aXP1[nIdx].Y()+=pInfo->aObj2Line2.Y(); aXP1[nIdx+1].Y()+=pInfo->aObj2Line2.Y(); @@ -1434,7 +1434,7 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, long nAngle1, const Rec } } if (pInfo->nObj2Lines>=3) { - USHORT nIdx=pInfo->ImpGetPolyIdx(OBJ2LINE3,aXP1); + sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(OBJ2LINE3,aXP1); if (pInfo->ImpIsHorzLine(OBJ2LINE3,aXP1)) { aXP1[nIdx].Y()+=pInfo->aObj2Line3.Y(); aXP1[nIdx+1].Y()+=pInfo->aObj2Line3.Y(); @@ -1552,11 +1552,11 @@ je Objekt variiert von 0-3: void __EXPORT SdrEdgeObj::Notify(SfxBroadcaster& rBC, const SfxHint& rHint) { SfxSimpleHint* pSimple=PTR_CAST(SfxSimpleHint,&rHint); - ULONG nId=pSimple==0 ? 0 : pSimple->GetId(); - FASTBOOL bDataChg=nId==SFX_HINT_DATACHANGED; - FASTBOOL bDying=nId==SFX_HINT_DYING; - FASTBOOL bObj1=aCon1.pObj!=NULL && aCon1.pObj->GetBroadcaster()==&rBC; - FASTBOOL bObj2=aCon2.pObj!=NULL && aCon2.pObj->GetBroadcaster()==&rBC; + sal_uIntPtr nId=pSimple==0 ? 0 : pSimple->GetId(); + int bDataChg=nId==SFX_HINT_DATACHANGED; + int bDying=nId==SFX_HINT_DYING; + int bObj1=aCon1.pObj!=NULL && aCon1.pObj->GetBroadcaster()==&rBC; + int bObj2=aCon2.pObj!=NULL && aCon2.pObj->GetBroadcaster()==&rBC; if (bDying && (bObj1 || bObj2)) { // #35605# Dying vorher abfangen, damit AttrObj nicht // wg. vermeintlicher Vorlagenaenderung rumbroadcastet @@ -1713,10 +1713,10 @@ sal_uInt32 SdrEdgeObj::GetHdlCount() const } else if (eKind==SDREDGE_THREELINES && nPntAnz == 4L) { - if(GetConnectedNode(TRUE)) + if(GetConnectedNode(sal_True)) nHdlAnz++; - if(GetConnectedNode(FALSE)) + if(GetConnectedNode(sal_False)) nHdlAnz++; } } @@ -1731,10 +1731,10 @@ SdrHdl* SdrEdgeObj::GetHdl(sal_uInt32 nHdlNum) const if (nPntAnz!=0) { if (nHdlNum==0) { pHdl=new ImpEdgeHdl((*pEdgeTrack)[0],HDL_POLY); - if (aCon1.pObj!=NULL && aCon1.bBestVertex) pHdl->Set1PixMore(TRUE); + if (aCon1.pObj!=NULL && aCon1.bBestVertex) pHdl->Set1PixMore(sal_True); } else if (nHdlNum==1) { - pHdl=new ImpEdgeHdl((*pEdgeTrack)[USHORT(nPntAnz-1)],HDL_POLY); - if (aCon2.pObj!=NULL && aCon2.bBestVertex) pHdl->Set1PixMore(TRUE); + pHdl=new ImpEdgeHdl((*pEdgeTrack)[sal_uInt16(nPntAnz-1)],HDL_POLY); + if (aCon2.pObj!=NULL && aCon2.bBestVertex) pHdl->Set1PixMore(sal_True); } else { SdrEdgeKind eKind=((SdrEdgeKindItem&)(GetObjectItem(SDRATTR_EDGEKIND))).GetValue(); if (eKind==SDREDGE_ORTHOLINES || eKind==SDREDGE_BEZIER) { @@ -1774,7 +1774,7 @@ SdrHdl* SdrEdgeObj::GetHdl(sal_uInt32 nHdlNum) const } } else if (eKind==SDREDGE_THREELINES) { sal_uInt32 nNum(nHdlNum); - if (GetConnectedNode(TRUE)==NULL) nNum++; + if (GetConnectedNode(sal_True)==NULL) nNum++; Point aPos((*pEdgeTrack)[(sal_uInt16)nNum-1]); pHdl=new ImpEdgeHdl(aPos,HDL_POLY); if (nNum==2) ((ImpEdgeHdl*)pHdl)->SetLineCode(OBJ1LINE2); @@ -1904,7 +1904,7 @@ bool SdrEdgeObj::applySpecialDrag(SdrDragStat& rDragStat) // force recalc EdgeTrack *pEdgeTrack = ImpCalcEdgeTrack(*pEdgeTrack, aCon1, aCon2, &aEdgeInfo); - bEdgeTrackDirty=FALSE; + bEdgeTrackDirty=sal_False; // save EdgeInfos and mark object as user modified ImpSetEdgeInfoToAttr(); @@ -2004,42 +2004,42 @@ basegfx::B2DPolygon SdrEdgeObj::ImplAddConnectorOverlay(SdrDragMethod& rDragMeth return aResult; } -FASTBOOL SdrEdgeObj::BegCreate(SdrDragStat& rDragStat) +int SdrEdgeObj::BegCreate(SdrDragStat& rDragStat) { - rDragStat.SetNoSnap(TRUE); + rDragStat.SetNoSnap(sal_True); pEdgeTrack->SetPointCount(2); (*pEdgeTrack)[0]=rDragStat.GetStart(); (*pEdgeTrack)[1]=rDragStat.GetNow(); if (rDragStat.GetPageView()!=NULL) { ImpFindConnector(rDragStat.GetStart(),*rDragStat.GetPageView(),aCon1,this); - ConnectToNode(TRUE,aCon1.pObj); + ConnectToNode(sal_True,aCon1.pObj); } *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo); - return TRUE; + return sal_True; } -FASTBOOL SdrEdgeObj::MovCreate(SdrDragStat& rDragStat) +int SdrEdgeObj::MovCreate(SdrDragStat& rDragStat) { - USHORT nMax=pEdgeTrack->GetPointCount(); + sal_uInt16 nMax=pEdgeTrack->GetPointCount(); (*pEdgeTrack)[nMax-1]=rDragStat.GetNow(); if (rDragStat.GetPageView()!=NULL) { ImpFindConnector(rDragStat.GetNow(),*rDragStat.GetPageView(),aCon2,this); rDragStat.GetView()->SetConnectMarker(aCon2,*rDragStat.GetPageView()); } SetBoundRectDirty(); - bSnapRectDirty=TRUE; - ConnectToNode(FALSE,aCon2.pObj); + bSnapRectDirty=sal_True; + ConnectToNode(sal_False,aCon2.pObj); *pEdgeTrack=ImpCalcEdgeTrack(*pEdgeTrack,aCon1,aCon2,&aEdgeInfo); - bEdgeTrackDirty=FALSE; - return TRUE; + bEdgeTrackDirty=sal_False; + return sal_True; } -FASTBOOL SdrEdgeObj::EndCreate(SdrDragStat& rDragStat, SdrCreateCmd eCmd) +int SdrEdgeObj::EndCreate(SdrDragStat& rDragStat, SdrCreateCmd eCmd) { - FASTBOOL bOk=(eCmd==SDRCREATE_FORCEEND || rDragStat.GetPointAnz()>=2); + int bOk=(eCmd==SDRCREATE_FORCEEND || rDragStat.GetPointAnz()>=2); if (bOk) { - ConnectToNode(TRUE,aCon1.pObj); - ConnectToNode(FALSE,aCon2.pObj); + ConnectToNode(sal_True,aCon1.pObj); + ConnectToNode(sal_False,aCon2.pObj); if (rDragStat.GetView()!=NULL) { rDragStat.GetView()->HideConnectMarker(); } @@ -2049,12 +2049,12 @@ FASTBOOL SdrEdgeObj::EndCreate(SdrDragStat& rDragStat, SdrCreateCmd eCmd) return bOk; } -FASTBOOL SdrEdgeObj::BckCreate(SdrDragStat& rDragStat) +int SdrEdgeObj::BckCreate(SdrDragStat& rDragStat) { if (rDragStat.GetView()!=NULL) { rDragStat.GetView()->HideConnectMarker(); } - return FALSE; + return sal_False; } void SdrEdgeObj::BrkCreate(SdrDragStat& rDragStat) @@ -2076,15 +2076,15 @@ Pointer SdrEdgeObj::GetCreatePointer() const return Pointer(POINTER_DRAW_CONNECT); } -FASTBOOL SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, SdrObjConnection& rCon, const SdrEdgeObj* pThis, OutputDevice* pOut) +int SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, SdrObjConnection& rCon, const SdrEdgeObj* pThis, OutputDevice* pOut) { rCon.ResetVars(); if (pOut==NULL) pOut=rPV.GetView().GetFirstOutputDevice(); // GetWin(0); - if (pOut==NULL) return FALSE; + if (pOut==NULL) return sal_False; SdrObjList* pOL=rPV.GetObjList(); const SetOfByte& rVisLayer=rPV.GetVisibleLayers(); // Sensitiver Bereich der Konnektoren ist doppelt so gross wie die Handles: - USHORT nMarkHdSiz=rPV.GetView().GetMarkHdlSizePixel(); + sal_uInt16 nMarkHdSiz=rPV.GetView().GetMarkHdlSizePixel(); Size aHalfConSiz(nMarkHdSiz,nMarkHdSiz); aHalfConSiz=pOut->PixelToLogic(aHalfConSiz); Size aHalfCenterSiz(2*aHalfConSiz.Width(),2*aHalfConSiz.Height()); @@ -2093,13 +2093,13 @@ FASTBOOL SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, aMouseRect.Top() -=aHalfConSiz.Height(); aMouseRect.Right() +=aHalfConSiz.Width(); aMouseRect.Bottom()+=aHalfConSiz.Height(); - USHORT nBoundHitTol=(USHORT)aHalfConSiz.Width()/2; if (nBoundHitTol==0) nBoundHitTol=1; - ULONG no=pOL->GetObjCount(); - FASTBOOL bFnd=FALSE; + sal_uInt16 nBoundHitTol=(sal_uInt16)aHalfConSiz.Width()/2; if (nBoundHitTol==0) nBoundHitTol=1; + sal_uIntPtr no=pOL->GetObjCount(); + int bFnd=sal_False; SdrObjConnection aTestCon; SdrObjConnection aBestCon; - FASTBOOL bTestBoundHit=FALSE; - //FASTBOOL bBestBoundHit=FALSE; + int bTestBoundHit=sal_False; + //int bBestBoundHit=sal_False; while (no>0 && !bFnd) { // Problem: Gruppenobjekt mit verschiedenen Layern liefert LayerID 0 !!!! @@ -2112,43 +2112,43 @@ FASTBOOL SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, Rectangle aObjBound(pObj->GetCurrentBoundRect()); if (aObjBound.IsOver(aMouseRect)) { aTestCon.ResetVars(); - bTestBoundHit=FALSE; - FASTBOOL bEdge=HAS_BASE(SdrEdgeObj,pObj); // kein BestCon fuer Edge + bTestBoundHit=sal_False; + int bEdge=HAS_BASE(SdrEdgeObj,pObj); // kein BestCon fuer Edge // Die Userdefined Konnektoren haben absolute Prioritaet. // Danach kommt Vertex, Corner und Mitte(Best) gleich priorisiert. // Zum Schluss kommt noch ein HitTest aufs Obj. const SdrGluePointList* pGPL=pObj->GetGluePointList(); - USHORT nConAnz=pGPL==NULL ? 0 : pGPL->GetCount(); - USHORT nGesAnz=nConAnz+9; - FASTBOOL bUserFnd=FALSE; - ULONG nBestDist=0xFFFFFFFF; - for (USHORT i=0; i<nGesAnz; i++) + sal_uInt16 nConAnz=pGPL==NULL ? 0 : pGPL->GetCount(); + sal_uInt16 nGesAnz=nConAnz+9; + int bUserFnd=sal_False; + sal_uIntPtr nBestDist=0xFFFFFFFF; + for (sal_uInt16 i=0; i<nGesAnz; i++) { - FASTBOOL bUser=i<nConAnz; - FASTBOOL bVertex=i>=nConAnz+0 && i<nConAnz+4; - FASTBOOL bCorner=i>=nConAnz+4 && i<nConAnz+8; - FASTBOOL bCenter=i==nConAnz+8; - FASTBOOL bOk=FALSE; + int bUser=i<nConAnz; + int bVertex=i>=nConAnz+0 && i<nConAnz+4; + int bCorner=i>=nConAnz+4 && i<nConAnz+8; + int bCenter=i==nConAnz+8; + int bOk=sal_False; Point aConPos; - USHORT nConNum=i; + sal_uInt16 nConNum=i; if (bUser) { const SdrGluePoint& rGP=(*pGPL)[nConNum]; aConPos=rGP.GetAbsolutePos(*pObj); nConNum=rGP.GetId(); - bOk=TRUE; + bOk=sal_True; } else if (bVertex && !bUserFnd) { nConNum=nConNum-nConAnz; if (rPV.GetView().IsAutoVertexConnectors()) { SdrGluePoint aPt(pObj->GetVertexGluePoint(nConNum)); aConPos=aPt.GetAbsolutePos(*pObj); - bOk=TRUE; + bOk=sal_True; } else i+=3; } else if (bCorner && !bUserFnd) { nConNum-=nConAnz+4; if (rPV.GetView().IsAutoCornerConnectors()) { SdrGluePoint aPt(pObj->GetCornerGluePoint(nConNum)); aConPos=aPt.GetAbsolutePos(*pObj); - bOk=TRUE; + bOk=sal_True; } else i+=3; } else if (bCenter && !bUserFnd && !bEdge) @@ -2160,20 +2160,20 @@ FASTBOOL SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, // Edges nicht! nConNum=0; aConPos=aObjBound.Center(); - bOk=TRUE; + bOk=sal_True; } } if (bOk && aMouseRect.IsInside(aConPos)) { - if (bUser) bUserFnd=TRUE; - bFnd=TRUE; - ULONG nDist=(ULONG)Abs(aConPos.X()-rPt.X())+(ULONG)Abs(aConPos.Y()-rPt.Y()); + if (bUser) bUserFnd=sal_True; + bFnd=sal_True; + sal_uIntPtr nDist=(sal_uIntPtr)Abs(aConPos.X()-rPt.X())+(sal_uIntPtr)Abs(aConPos.Y()-rPt.Y()); if (nDist<nBestDist) { nBestDist=nDist; aTestCon.pObj=pObj; aTestCon.nConId=nConNum; aTestCon.bAutoCorner=bCorner; aTestCon.bAutoVertex=bVertex; - aTestCon.bBestConn=FALSE; // bCenter; + aTestCon.bBestConn=sal_False; // bCenter; aTestCon.bBestVertex=bCenter; } } @@ -2188,9 +2188,9 @@ FASTBOOL SdrEdgeObj::ImpFindConnector(const Point& rPt, const SdrPageView& rPV, // Suppress default connect at object inside bound if(!pThis || !pThis->GetSuppressDefaultConnect()) { - bFnd=TRUE; + bFnd=sal_True; aTestCon.pObj=pObj; - aTestCon.bBestConn=TRUE; + aTestCon.bBestConn=sal_True; } } if (bFnd) { @@ -2261,7 +2261,7 @@ void SdrEdgeObj::NbcResize(const Point& rRefPnt, const Fraction& aXFact, const F } } -SdrObject* SdrEdgeObj::DoConvertToPolyObj(BOOL bBezier) const +SdrObject* SdrEdgeObj::DoConvertToPolyObj(sal_Bool bBezier) const { basegfx::B2DPolyPolygon aPolyPolygon; aPolyPolygon.append(pEdgeTrack->getB2DPolygon()); @@ -2279,7 +2279,7 @@ sal_uInt32 SdrEdgeObj::GetSnapPointCount() const Point SdrEdgeObj::GetSnapPoint(sal_uInt32 i) const { ((SdrEdgeObj*)this)->ImpUndirtyEdgeTrack(); - USHORT nAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nAnz=pEdgeTrack->GetPointCount(); if (i==0) return (*pEdgeTrack)[0]; else return (*pEdgeTrack)[nAnz-1]; } @@ -2297,7 +2297,7 @@ sal_uInt32 SdrEdgeObj::GetPointCount() const Point SdrEdgeObj::GetPoint(sal_uInt32 i) const { ((SdrEdgeObj*)this)->ImpUndirtyEdgeTrack(); - USHORT nAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nAnz=pEdgeTrack->GetPointCount(); if (0L == i) return (*pEdgeTrack)[0]; else @@ -2308,7 +2308,7 @@ void SdrEdgeObj::NbcSetPoint(const Point& rPnt, sal_uInt32 i) { // ToDo: Umconnekten fehlt noch ImpUndirtyEdgeTrack(); - USHORT nAnz=pEdgeTrack->GetPointCount(); + sal_uInt16 nAnz=pEdgeTrack->GetPointCount(); if (0L == i) (*pEdgeTrack)[0]=rPnt; if (1L == i) @@ -2364,7 +2364,7 @@ void SdrEdgeObj::RestGeoData(const SdrObjGeoData& rGeo) aEdgeInfo =rEGeo.aEdgeInfo; } -Point SdrEdgeObj::GetTailPoint( BOOL bTail ) const +Point SdrEdgeObj::GetTailPoint( sal_Bool bTail ) const { if( pEdgeTrack && pEdgeTrack->GetPointCount()!=0) { @@ -2375,7 +2375,7 @@ Point SdrEdgeObj::GetTailPoint( BOOL bTail ) const } else { - const USHORT nSiz = rTrack0.GetPointCount() - 1; + const sal_uInt16 nSiz = rTrack0.GetPointCount() - 1; return rTrack0[nSiz]; } } @@ -2389,7 +2389,7 @@ Point SdrEdgeObj::GetTailPoint( BOOL bTail ) const } -void SdrEdgeObj::SetTailPoint( BOOL bTail, const Point& rPt ) +void SdrEdgeObj::SetTailPoint( sal_Bool bTail, const Point& rPt ) { ImpSetTailPoint( bTail, rPt ); SetChanged(); @@ -2427,12 +2427,12 @@ void SdrEdgeObj::setGluePointIndex( sal_Bool bTail, sal_Int32 nIndex /* = -1 */ nIndex = 0; } - rConn1.SetConnectorId( (USHORT)nIndex ); + rConn1.SetConnectorId( (sal_uInt16)nIndex ); SetChanged(); SetRectsDirty(); ImpRecalcEdgeTrack(); - // bEdgeTrackDirty=TRUE; + // bEdgeTrackDirty=sal_True; } /** this method is used by the api to return a glue point id for a connection. |