summaryrefslogtreecommitdiff
path: root/svx/source/svdraw
diff options
context:
space:
mode:
Diffstat (limited to 'svx/source/svdraw')
-rw-r--r--svx/source/svdraw/svdhdl.cxx2
-rw-r--r--svx/source/svdraw/svdoedge.cxx200
2 files changed, 101 insertions, 101 deletions
diff --git a/svx/source/svdraw/svdhdl.cxx b/svx/source/svdraw/svdhdl.cxx
index de6ffcd8175f..e5820f945ace 100644
--- a/svx/source/svdraw/svdhdl.cxx
+++ b/svx/source/svdraw/svdhdl.cxx
@@ -1709,7 +1709,7 @@ bool ImpEdgeHdl::IsHorzDrag() const
}
else if (eEdgeKind==SdrEdgeKind::ThreeLines)
{
- tools::Long nAngle=nObjHdlNum==2 ? rInfo.nAngle1 : rInfo.nAngle2;
+ tools::Long nAngle=nObjHdlNum==2 ? rInfo.m_nAngle1 : rInfo.m_nAngle2;
return nAngle==0 || nAngle==18000;
}
return false;
diff --git a/svx/source/svdraw/svdoedge.cxx b/svx/source/svdraw/svdoedge.cxx
index be203714bddd..5b5b03e046e6 100644
--- a/svx/source/svdraw/svdoedge.cxx
+++ b/svx/source/svdraw/svdoedge.cxx
@@ -88,13 +88,13 @@ bool SdrObjConnection::TakeGluePoint(SdrGluePoint& rGP) const
Point& SdrEdgeInfoRec::ImpGetLineOffsetPoint(SdrEdgeLineCode eLineCode)
{
switch (eLineCode) {
- case SdrEdgeLineCode::Obj1Line2 : return aObj1Line2;
- case SdrEdgeLineCode::Obj1Line3 : return aObj1Line3;
- case SdrEdgeLineCode::Obj2Line2 : return aObj2Line2;
- case SdrEdgeLineCode::Obj2Line3 : return aObj2Line3;
- case SdrEdgeLineCode::MiddleLine: return aMiddleLine;
+ case SdrEdgeLineCode::Obj1Line2 : return m_aObj1Line2;
+ case SdrEdgeLineCode::Obj1Line3 : return m_aObj1Line3;
+ case SdrEdgeLineCode::Obj2Line2 : return m_aObj2Line2;
+ case SdrEdgeLineCode::Obj2Line3 : return m_aObj2Line3;
+ case SdrEdgeLineCode::MiddleLine: return m_aMiddleLine;
} // switch
- return aMiddleLine;
+ return m_aMiddleLine;
}
sal_uInt16 SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const
@@ -104,7 +104,7 @@ sal_uInt16 SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolyg
case SdrEdgeLineCode::Obj1Line3 : return 2;
case SdrEdgeLineCode::Obj2Line2 : return rXP.GetPointCount()-3;
case SdrEdgeLineCode::Obj2Line3 : return rXP.GetPointCount()-4;
- case SdrEdgeLineCode::MiddleLine: return nMiddleLine;
+ case SdrEdgeLineCode::MiddleLine: return m_nMiddleLine;
} // switch
return 0;
}
@@ -112,10 +112,10 @@ sal_uInt16 SdrEdgeInfoRec::ImpGetPolyIdx(SdrEdgeLineCode eLineCode, const XPolyg
bool SdrEdgeInfoRec::ImpIsHorzLine(SdrEdgeLineCode eLineCode, const XPolygon& rXP) const
{
sal_uInt16 nIdx=ImpGetPolyIdx(eLineCode,rXP);
- bool bHorz=nAngle1==0 || nAngle1==18000;
+ bool bHorz=m_nAngle1==0 || m_nAngle1==18000;
if (eLineCode==SdrEdgeLineCode::Obj2Line2 || eLineCode==SdrEdgeLineCode::Obj2Line3) {
nIdx=rXP.GetPointCount()-nIdx;
- bHorz=nAngle2==0 || nAngle2==18000;
+ bHorz=m_nAngle2==0 || m_nAngle2==18000;
}
if ((nIdx & 1)==1) bHorz=!bHorz;
return bHorz;
@@ -223,31 +223,31 @@ void SdrEdgeObj::ImpSetAttrToEdgeInfo()
sal_Int32 nVals[3] = { nVal1, nVal2, nVal3 };
sal_uInt16 n = 0;
- if(aEdgeInfo.nObj1Lines >= 2 && n < 3)
+ if(aEdgeInfo.m_nObj1Lines >= 2 && n < 3)
{
aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj1Line2, *pEdgeTrack, nVals[n]);
n++;
}
- if(aEdgeInfo.nObj1Lines >= 3 && n < 3)
+ if(aEdgeInfo.m_nObj1Lines >= 3 && n < 3)
{
aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj1Line3, *pEdgeTrack, nVals[n]);
n++;
}
- if(aEdgeInfo.nMiddleLine != 0xFFFF && n < 3)
+ if(aEdgeInfo.m_nMiddleLine != 0xFFFF && n < 3)
{
aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::MiddleLine, *pEdgeTrack, nVals[n]);
n++;
}
- if(aEdgeInfo.nObj2Lines >= 3 && n < 3)
+ if(aEdgeInfo.m_nObj2Lines >= 3 && n < 3)
{
aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj2Line3, *pEdgeTrack, nVals[n]);
n++;
}
- if(aEdgeInfo.nObj2Lines >= 2 && n < 3)
+ if(aEdgeInfo.m_nObj2Lines >= 2 && n < 3)
{
aEdgeInfo.ImpSetLineOffset(SdrEdgeLineCode::Obj2Line2, *pEdgeTrack, nVals[n]);
n++;
@@ -255,25 +255,25 @@ void SdrEdgeObj::ImpSetAttrToEdgeInfo()
}
else if(eKind == SdrEdgeKind::ThreeLines)
{
- bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000;
- bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000;
+ bool bHor1 = aEdgeInfo.m_nAngle1 == 0 || aEdgeInfo.m_nAngle1 == 18000;
+ bool bHor2 = aEdgeInfo.m_nAngle2 == 0 || aEdgeInfo.m_nAngle2 == 18000;
if(bHor1)
{
- aEdgeInfo.aObj1Line2.setX( nVal1 );
+ aEdgeInfo.m_aObj1Line2.setX( nVal1 );
}
else
{
- aEdgeInfo.aObj1Line2.setY( nVal1 );
+ aEdgeInfo.m_aObj1Line2.setY( nVal1 );
}
if(bHor2)
{
- aEdgeInfo.aObj2Line2.setX( nVal2 );
+ aEdgeInfo.m_aObj2Line2.setX( nVal2 );
}
else
{
- aEdgeInfo.aObj2Line2.setY( nVal2 );
+ aEdgeInfo.m_aObj2Line2.setY( nVal2 );
}
}
@@ -293,31 +293,31 @@ void SdrEdgeObj::ImpSetEdgeInfoToAttr()
if(eKind == SdrEdgeKind::OrthoLines || eKind == SdrEdgeKind::Bezier)
{
- if(aEdgeInfo.nObj1Lines >= 2 && n < 3)
+ if(aEdgeInfo.m_nObj1Lines >= 2 && n < 3)
{
nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj1Line2, *pEdgeTrack);
n++;
}
- if(aEdgeInfo.nObj1Lines >= 3 && n < 3)
+ if(aEdgeInfo.m_nObj1Lines >= 3 && n < 3)
{
nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj1Line3, *pEdgeTrack);
n++;
}
- if(aEdgeInfo.nMiddleLine != 0xFFFF && n < 3)
+ if(aEdgeInfo.m_nMiddleLine != 0xFFFF && n < 3)
{
nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::MiddleLine, *pEdgeTrack);
n++;
}
- if(aEdgeInfo.nObj2Lines >= 3 && n < 3)
+ if(aEdgeInfo.m_nObj2Lines >= 3 && n < 3)
{
nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj2Line3, *pEdgeTrack);
n++;
}
- if(aEdgeInfo.nObj2Lines >= 2 && n < 3)
+ if(aEdgeInfo.m_nObj2Lines >= 2 && n < 3)
{
nVals[n] = aEdgeInfo.ImpGetLineOffset(SdrEdgeLineCode::Obj2Line2, *pEdgeTrack);
n++;
@@ -325,12 +325,12 @@ void SdrEdgeObj::ImpSetEdgeInfoToAttr()
}
else if(eKind == SdrEdgeKind::ThreeLines)
{
- bool bHor1 = aEdgeInfo.nAngle1 == 0 || aEdgeInfo.nAngle1 == 18000;
- bool bHor2 = aEdgeInfo.nAngle2 == 0 || aEdgeInfo.nAngle2 == 18000;
+ bool bHor1 = aEdgeInfo.m_nAngle1 == 0 || aEdgeInfo.m_nAngle1 == 18000;
+ bool bHor2 = aEdgeInfo.m_nAngle2 == 0 || aEdgeInfo.m_nAngle2 == 18000;
n = 2;
- nVals[0] = bHor1 ? aEdgeInfo.aObj1Line2.X() : aEdgeInfo.aObj1Line2.Y();
- nVals[1] = bHor2 ? aEdgeInfo.aObj2Line2.X() : aEdgeInfo.aObj2Line2.Y();
+ nVals[0] = bHor1 ? aEdgeInfo.m_aObj1Line2.X() : aEdgeInfo.m_aObj1Line2.Y();
+ nVals[1] = bHor2 ? aEdgeInfo.m_aObj2Line2.X() : aEdgeInfo.m_aObj2Line2.Y();
}
if(!(n != nValCnt || nVals[0] != nVal1 || nVals[1] != nVal2 || nVals[2] != nVal3))
@@ -886,11 +886,11 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
bool bVer2=bObn2 || bUnt2;
bool bInfo=pInfo!=nullptr;
if (bInfo) {
- pInfo->nAngle1=nAngle1;
- pInfo->nAngle2=nAngle2;
- pInfo->nObj1Lines=1;
- pInfo->nObj2Lines=1;
- pInfo->nMiddleLine=0xFFFF;
+ pInfo->m_nAngle1=nAngle1;
+ pInfo->m_nAngle2=nAngle2;
+ pInfo->m_nObj1Lines=1;
+ pInfo->m_nObj2Lines=1;
+ pInfo->m_nMiddleLine=0xFFFF;
}
Point aPt1(rPt1);
Point aPt2(rPt2);
@@ -928,17 +928,17 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
*pnQuality=nQ;
}
if (bInfo) {
- pInfo->nObj1Lines=2;
- pInfo->nObj2Lines=2;
+ pInfo->m_nObj1Lines=2;
+ pInfo->m_nObj2Lines=2;
if (bHor1) {
- aXP[1].AdjustX(pInfo->aObj1Line2.X() );
+ aXP[1].AdjustX(pInfo->m_aObj1Line2.X() );
} else {
- aXP[1].AdjustY(pInfo->aObj1Line2.Y() );
+ aXP[1].AdjustY(pInfo->m_aObj1Line2.Y() );
}
if (bHor2) {
- aXP[2].AdjustX(pInfo->aObj2Line2.X() );
+ aXP[2].AdjustX(pInfo->m_aObj2Line2.X() );
} else {
- aXP[2].AdjustY(pInfo->aObj2Line2.Y() );
+ aXP[2].AdjustY(pInfo->m_aObj2Line2.Y() );
}
}
return aXP;
@@ -1267,8 +1267,8 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
sal_uInt16 nXP1Cnt=aXP1.GetPointCount();
sal_uInt16 nXP2Cnt=aXP2.GetPointCount();
if (bInfo) {
- pInfo->nObj1Lines=nXP1Cnt; if (nXP1Cnt>1) pInfo->nObj1Lines--;
- pInfo->nObj2Lines=nXP2Cnt; if (nXP2Cnt>1) pInfo->nObj2Lines--;
+ pInfo->m_nObj1Lines=nXP1Cnt; if (nXP1Cnt>1) pInfo->m_nObj1Lines--;
+ pInfo->m_nObj2Lines=nXP2Cnt; if (nXP2Cnt>1) pInfo->m_nObj2Lines--;
}
Point aEP1(aXP1[nXP1Cnt-1]);
Point aEP2(aXP2[nXP2Cnt-1]);
@@ -1285,22 +1285,22 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
if (bInfo) {
// Inserting a MeetingPoint adds 2 new lines,
// either might become the center line.
- if (pInfo->nObj1Lines==pInfo->nObj2Lines) {
- pInfo->nObj1Lines++;
- pInfo->nObj2Lines++;
+ if (pInfo->m_nObj1Lines==pInfo->m_nObj2Lines) {
+ pInfo->m_nObj1Lines++;
+ pInfo->m_nObj2Lines++;
} else {
- if (pInfo->nObj1Lines>pInfo->nObj2Lines) {
- pInfo->nObj2Lines++;
- pInfo->nMiddleLine=nXP1Cnt-1;
+ if (pInfo->m_nObj1Lines>pInfo->m_nObj2Lines) {
+ pInfo->m_nObj2Lines++;
+ pInfo->m_nMiddleLine=nXP1Cnt-1;
} else {
- pInfo->nObj1Lines++;
- pInfo->nMiddleLine=nXP1Cnt;
+ pInfo->m_nObj1Lines++;
+ pInfo->m_nMiddleLine=nXP1Cnt;
}
}
}
} else if (bInfo && aEP1!=aEP2 && nXP1Cnt+nXP2Cnt>=4) {
// By connecting both ends, another line is added, this becomes the center line.
- pInfo->nMiddleLine=nXP1Cnt-1;
+ pInfo->m_nMiddleLine=nXP1Cnt-1;
}
sal_uInt16 nNum=aXP2.GetPointCount();
if (aXP1[nXP1Cnt-1]==aXP2[nXP2Cnt-1] && nXP1Cnt>1 && nXP2Cnt>1) nNum--;
@@ -1336,17 +1336,17 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
// more shapes:
if (bInfo) {
if (cForm=='I' || cForm=='L' || cForm=='Z' || cForm=='U') {
- pInfo->nObj1Lines=1;
- pInfo->nObj2Lines=1;
+ pInfo->m_nObj1Lines=1;
+ pInfo->m_nObj2Lines=1;
if (cForm=='Z' || cForm=='U') {
- pInfo->nMiddleLine=1;
+ pInfo->m_nMiddleLine=1;
} else {
- pInfo->nMiddleLine=0xFFFF;
+ pInfo->m_nMiddleLine=0xFFFF;
}
} else if (cForm=='S' || cForm=='C') {
- pInfo->nObj1Lines=2;
- pInfo->nObj2Lines=2;
- pInfo->nMiddleLine=2;
+ pInfo->m_nObj1Lines=2;
+ pInfo->m_nObj2Lines=2;
+ pInfo->m_nMiddleLine=2;
}
}
}
@@ -1449,54 +1449,54 @@ XPolygon SdrEdgeObj::ImpCalcEdgeTrack(const Point& rPt1, tools::Long nAngle1, co
*pnQuality=nQual;
}
if (bInfo) { // now apply line offsets to aXP1
- if (pInfo->nMiddleLine!=0xFFFF) {
+ if (pInfo->m_nMiddleLine!=0xFFFF) {
sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::MiddleLine,aXP1);
if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::MiddleLine,aXP1)) {
- aXP1[nIdx].AdjustY(pInfo->aMiddleLine.Y() );
- aXP1[nIdx+1].AdjustY(pInfo->aMiddleLine.Y() );
+ aXP1[nIdx].AdjustY(pInfo->m_aMiddleLine.Y() );
+ aXP1[nIdx+1].AdjustY(pInfo->m_aMiddleLine.Y() );
} else {
- aXP1[nIdx].AdjustX(pInfo->aMiddleLine.X() );
- aXP1[nIdx+1].AdjustX(pInfo->aMiddleLine.X() );
+ aXP1[nIdx].AdjustX(pInfo->m_aMiddleLine.X() );
+ aXP1[nIdx+1].AdjustX(pInfo->m_aMiddleLine.X() );
}
}
- if (pInfo->nObj1Lines>=2) {
+ if (pInfo->m_nObj1Lines>=2) {
sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj1Line2,aXP1);
if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj1Line2,aXP1)) {
- aXP1[nIdx].AdjustY(pInfo->aObj1Line2.Y() );
- aXP1[nIdx+1].AdjustY(pInfo->aObj1Line2.Y() );
+ aXP1[nIdx].AdjustY(pInfo->m_aObj1Line2.Y() );
+ aXP1[nIdx+1].AdjustY(pInfo->m_aObj1Line2.Y() );
} else {
- aXP1[nIdx].AdjustX(pInfo->aObj1Line2.X() );
- aXP1[nIdx+1].AdjustX(pInfo->aObj1Line2.X() );
+ aXP1[nIdx].AdjustX(pInfo->m_aObj1Line2.X() );
+ aXP1[nIdx+1].AdjustX(pInfo->m_aObj1Line2.X() );
}
}
- if (pInfo->nObj1Lines>=3) {
+ if (pInfo->m_nObj1Lines>=3) {
sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj1Line3,aXP1);
if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj1Line3,aXP1)) {
- aXP1[nIdx].AdjustY(pInfo->aObj1Line3.Y() );
- aXP1[nIdx+1].AdjustY(pInfo->aObj1Line3.Y() );
+ aXP1[nIdx].AdjustY(pInfo->m_aObj1Line3.Y() );
+ aXP1[nIdx+1].AdjustY(pInfo->m_aObj1Line3.Y() );
} else {
- aXP1[nIdx].AdjustX(pInfo->aObj1Line3.X() );
- aXP1[nIdx+1].AdjustX(pInfo->aObj1Line3.X() );
+ aXP1[nIdx].AdjustX(pInfo->m_aObj1Line3.X() );
+ aXP1[nIdx+1].AdjustX(pInfo->m_aObj1Line3.X() );
}
}
- if (pInfo->nObj2Lines>=2) {
+ if (pInfo->m_nObj2Lines>=2) {
sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj2Line2,aXP1);
if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj2Line2,aXP1)) {
- aXP1[nIdx].AdjustY(pInfo->aObj2Line2.Y() );
- aXP1[nIdx+1].AdjustY(pInfo->aObj2Line2.Y() );
+ aXP1[nIdx].AdjustY(pInfo->m_aObj2Line2.Y() );
+ aXP1[nIdx+1].AdjustY(pInfo->m_aObj2Line2.Y() );
} else {
- aXP1[nIdx].AdjustX(pInfo->aObj2Line2.X() );
- aXP1[nIdx+1].AdjustX(pInfo->aObj2Line2.X() );
+ aXP1[nIdx].AdjustX(pInfo->m_aObj2Line2.X() );
+ aXP1[nIdx+1].AdjustX(pInfo->m_aObj2Line2.X() );
}
}
- if (pInfo->nObj2Lines>=3) {
+ if (pInfo->m_nObj2Lines>=3) {
sal_uInt16 nIdx=pInfo->ImpGetPolyIdx(SdrEdgeLineCode::Obj2Line3,aXP1);
if (pInfo->ImpIsHorzLine(SdrEdgeLineCode::Obj2Line3,aXP1)) {
- aXP1[nIdx].AdjustY(pInfo->aObj2Line3.Y() );
- aXP1[nIdx+1].AdjustY(pInfo->aObj2Line3.Y() );
+ aXP1[nIdx].AdjustY(pInfo->m_aObj2Line3.Y() );
+ aXP1[nIdx+1].AdjustY(pInfo->m_aObj2Line3.Y() );
} else {
- aXP1[nIdx].AdjustX(pInfo->aObj2Line3.X() );
- aXP1[nIdx+1].AdjustX(pInfo->aObj2Line3.X() );
+ aXP1[nIdx].AdjustX(pInfo->m_aObj2Line3.X() );
+ aXP1[nIdx+1].AdjustX(pInfo->m_aObj2Line3.X() );
}
}
}
@@ -1753,9 +1753,9 @@ sal_uInt32 SdrEdgeObj::GetHdlCount() const
nHdlCnt = 2;
if ((eKind==SdrEdgeKind::OrthoLines || eKind==SdrEdgeKind::Bezier) && nPointCount >= 4)
{
- sal_uInt32 nO1(aEdgeInfo.nObj1Lines > 0 ? aEdgeInfo.nObj1Lines - 1 : 0);
- sal_uInt32 nO2(aEdgeInfo.nObj2Lines > 0 ? aEdgeInfo.nObj2Lines - 1 : 0);
- sal_uInt32 nM(aEdgeInfo.nMiddleLine != 0xFFFF ? 1 : 0);
+ sal_uInt32 nO1(aEdgeInfo.m_nObj1Lines > 0 ? aEdgeInfo.m_nObj1Lines - 1 : 0);
+ sal_uInt32 nO2(aEdgeInfo.m_nObj2Lines > 0 ? aEdgeInfo.m_nObj2Lines - 1 : 0);
+ sal_uInt32 nM(aEdgeInfo.m_nMiddleLine != 0xFFFF ? 1 : 0);
nHdlCnt += nO1 + nO2 + nM;
}
else if (eKind==SdrEdgeKind::ThreeLines && nPointCount == 4)
@@ -1793,9 +1793,9 @@ void SdrEdgeObj::AddToHdlList(SdrHdlList& rHdlList) const
SdrEdgeKind eKind=GetObjectItem(SDRATTR_EDGEKIND).GetValue();
if ((eKind==SdrEdgeKind::OrthoLines || eKind==SdrEdgeKind::Bezier) && nPointCount >= 4)
{
- sal_uInt32 nO1(aEdgeInfo.nObj1Lines > 0 ? aEdgeInfo.nObj1Lines - 1 : 0);
- sal_uInt32 nO2(aEdgeInfo.nObj2Lines > 0 ? aEdgeInfo.nObj2Lines - 1 : 0);
- sal_uInt32 nM(aEdgeInfo.nMiddleLine != 0xFFFF ? 1 : 0);
+ sal_uInt32 nO1(aEdgeInfo.m_nObj1Lines > 0 ? aEdgeInfo.m_nObj1Lines - 1 : 0);
+ sal_uInt32 nO2(aEdgeInfo.m_nObj2Lines > 0 ? aEdgeInfo.m_nObj2Lines - 1 : 0);
+ sal_uInt32 nM(aEdgeInfo.m_nMiddleLine != 0xFFFF ? 1 : 0);
for(sal_uInt32 i = 0; i < (nO1 + nO2 + nM); ++i)
{
sal_Int32 nPt(0);
@@ -1814,7 +1814,7 @@ void SdrEdgeObj::AddToHdlList(SdrHdlList& rHdlList) const
} else {
nNum=nNum-nO2;
if (nNum<nM) {
- nPt=aEdgeInfo.nMiddleLine;
+ nPt=aEdgeInfo.m_nMiddleLine;
pHdl->SetLineCode(SdrEdgeLineCode::MiddleLine);
}
}
@@ -1948,11 +1948,11 @@ bool SdrEdgeObj::applySpecialDrag(SdrDragStat& rDragStat)
}
// reset edge info's offsets, this is an end point drag
- aEdgeInfo.aObj1Line2 = Point();
- aEdgeInfo.aObj1Line3 = Point();
- aEdgeInfo.aObj2Line2 = Point();
- aEdgeInfo.aObj2Line3 = Point();
- aEdgeInfo.aMiddleLine = Point();
+ aEdgeInfo.m_aObj1Line2 = Point();
+ aEdgeInfo.m_aObj1Line3 = Point();
+ aEdgeInfo.m_aObj2Line2 = Point();
+ aEdgeInfo.m_aObj2Line3 = Point();
+ aEdgeInfo.m_aMiddleLine = Point();
}
else
{
@@ -2316,11 +2316,11 @@ void SdrEdgeObj::NbcResize(const Point& rRefPnt, const Fraction& aXFact, const F
// if resize is not from paste, forget user distances
if (!getSdrModelFromSdrObject().IsPasteResize())
{
- aEdgeInfo.aObj1Line2 = Point();
- aEdgeInfo.aObj1Line3 = Point();
- aEdgeInfo.aObj2Line2 = Point();
- aEdgeInfo.aObj2Line3 = Point();
- aEdgeInfo.aMiddleLine = Point();
+ aEdgeInfo.m_aObj1Line2 = Point();
+ aEdgeInfo.m_aObj1Line3 = Point();
+ aEdgeInfo.m_aObj2Line2 = Point();
+ aEdgeInfo.m_aObj2Line3 = Point();
+ aEdgeInfo.m_aMiddleLine = Point();
}
}
generated by cgit (git 2.34.1) at 2025-02-05 23:07:29 +0000