diff options
Diffstat (limited to 'tools/source/ref/pstm.cxx')
| -rw-r--r-- | tools/source/ref/pstm.cxx | 218 |
1 files changed, 109 insertions, 109 deletions
diff --git a/tools/source/ref/pstm.cxx b/tools/source/ref/pstm.cxx index e0412fd5d675..b2a5600075cc 100644 --- a/tools/source/ref/pstm.cxx +++ b/tools/source/ref/pstm.cxx @@ -37,7 +37,7 @@ /************************************************************************ |* SvClassManager::Register() *************************************************************************/ -void SvClassManager::Register( USHORT nClassId, SvCreateInstancePersist pFunc ) +void SvClassManager::Register( sal_uInt16 nClassId, SvCreateInstancePersist pFunc ) { #ifdef DBG_UTIL SvCreateInstancePersist p; @@ -50,7 +50,7 @@ void SvClassManager::Register( USHORT nClassId, SvCreateInstancePersist pFunc ) /************************************************************************ |* SvClassManager::Get() *************************************************************************/ -SvCreateInstancePersist SvClassManager::Get( USHORT nClassId ) +SvCreateInstancePersist SvClassManager::Get( sal_uInt16 nClassId ) { Map::const_iterator i(aAssocTable.find(nClassId)); return i == aAssocTable.end() ? 0 : i->second; @@ -63,32 +63,32 @@ TYPEINIT0( SvRttiBase ); SvPersistBaseMemberList::SvPersistBaseMemberList(){} SvPersistBaseMemberList::SvPersistBaseMemberList( - USHORT nInitSz, USHORT nResize ) + sal_uInt16 nInitSz, sal_uInt16 nResize ) : SuperSvPersistBaseMemberList( nInitSz, nResize ){} -#define PERSIST_LIST_VER (BYTE)0 -#define PERSIST_LIST_DBGUTIL (BYTE)0x80 +#define PERSIST_LIST_VER (sal_uInt8)0 +#define PERSIST_LIST_DBGUTIL (sal_uInt8)0x80 /************************************************************************ |* SvPersistBaseMemberList::WriteOnlyStreamedObjects() *************************************************************************/ void SvPersistBaseMemberList::WriteObjects( SvPersistStream & rStm, - BOOL bOnlyStreamed ) const + sal_Bool bOnlyStreamed ) const { #ifdef STOR_NO_OPTIMIZE - rStm << (BYTE)(PERSIST_LIST_VER | PERSIST_LIST_DBGUTIL); - UINT32 nObjPos = rStm.WriteDummyLen(); + rStm << (sal_uInt8)(PERSIST_LIST_VER | PERSIST_LIST_DBGUTIL); + sal_uInt32 nObjPos = rStm.WriteDummyLen(); #else - BYTE bTmp = PERSIST_LIST_VER; + sal_uInt8 bTmp = PERSIST_LIST_VER; rStm << bTmp; #endif - UINT32 nCountMember = Count(); - ULONG nCountPos = rStm.Tell(); - UINT32 nWriteCount = 0; + sal_uInt32 nCountMember = Count(); + sal_uIntPtr nCountPos = rStm.Tell(); + sal_uInt32 nWriteCount = 0; rStm << nCountMember; //bloss die Liste nicht veraendern, //wegen Seiteneffekten beim Save - for( ULONG n = 0; n < nCountMember; n++ ) + for( sal_uIntPtr n = 0; n < nCountMember; n++ ) { SvPersistBase * pObj = GetObject( n ); if( !bOnlyStreamed || rStm.IsStreamed( pObj ) ) @@ -100,7 +100,7 @@ void SvPersistBaseMemberList::WriteObjects( SvPersistStream & rStm, if( nWriteCount != nCountMember ) { // nicht alle Objekte geschrieben, Count anpassen - ULONG nPos = rStm.Tell(); + sal_uIntPtr nPos = rStm.Tell(); rStm.Seek( nCountPos ); rStm << nWriteCount; rStm.Seek( nPos ); @@ -126,7 +126,7 @@ SvPersistStream& operator << ( SvPersistStream & rStm, SvPersistStream& operator >> ( SvPersistStream & rStm, SvPersistBaseMemberList & rLst ) { - BYTE nVer; + sal_uInt8 nVer; rStm >> nVer; if( (nVer & ~PERSIST_LIST_DBGUTIL) != PERSIST_LIST_VER ) @@ -135,13 +135,13 @@ SvPersistStream& operator >> ( SvPersistStream & rStm, DBG_ERROR( "persist list, false version" ); } - UINT32 nObjLen(0), nObjPos(0); + sal_uInt32 nObjLen(0), nObjPos(0); if( nVer & PERSIST_LIST_DBGUTIL ) nObjLen = rStm.ReadLen( &nObjPos ); sal_uInt32 nCount; rStm >> nCount; - for( ULONG n = 0; n < nCount && rStm.GetError() == SVSTREAM_OK; n++ ) + for( sal_uIntPtr n = 0; n < nCount && rStm.GetError() == SVSTREAM_OK; n++ ) { SvPersistBase * pObj; rStm >> pObj; @@ -168,7 +168,7 @@ SvPersistStream::SvPersistStream gespeichert werdn k"onnen */ SvStream * pStream, /* Dieser Stream wird als Medium genommen, auf dem der PersistStream arbeitet */ - UINT32 nStartIdxP /* Ab diesem Index werden die Id's f"ur + sal_uInt32 nStartIdxP /* Ab diesem Index werden die Id's f"ur die Objekte vergeben, er muss gr"osser als Null sein. */ ) @@ -187,7 +187,7 @@ SvPersistStream::SvPersistStream */ { DBG_ASSERT( nStartIdx != 0, "zero index not allowed" ); - bIsWritable = TRUE; + bIsWritable = sal_True; if( pStm ) { SetVersion( pStm->GetVersion() ); @@ -225,7 +225,7 @@ SvPersistStream::SvPersistStream wenn das erste aus dieser Hierarchie benutzt werden soll. */ { - bIsWritable = TRUE; + bIsWritable = sal_True; if( pStm ) { SetVersion( pStm->GetVersion() ); @@ -279,14 +279,14 @@ void SvPersistStream::SetStream } //========================================================================= -USHORT SvPersistStream::IsA() const +sal_uInt16 SvPersistStream::IsA() const /* [Beschreibung] Gibt den Identifier dieses Streamklasse zur"uck. [R"uckgabewert] - USHORT ID_PERSISTSTREAM wird zur"uckgegeben. + sal_uInt16 ID_PERSISTSTREAM wird zur"uckgegeben. [Querverweise] @@ -311,10 +311,10 @@ void SvPersistStream::ResetError() /************************************************************************* |* SvPersistStream::GetData() *************************************************************************/ -ULONG SvPersistStream::GetData( void* pData, ULONG nSize ) +sal_uIntPtr SvPersistStream::GetData( void* pData, sal_uIntPtr nSize ) { DBG_ASSERT( pStm, "stream not set" ); - ULONG nRet = pStm->Read( pData, nSize ); + sal_uIntPtr nRet = pStm->Read( pData, nSize ); SetError( pStm->GetError() ); return nRet; } @@ -322,10 +322,10 @@ ULONG SvPersistStream::GetData( void* pData, ULONG nSize ) /************************************************************************* |* SvPersistStream::PutData() *************************************************************************/ -ULONG SvPersistStream::PutData( const void* pData, ULONG nSize ) +sal_uIntPtr SvPersistStream::PutData( const void* pData, sal_uIntPtr nSize ) { DBG_ASSERT( pStm, "stream not set" ); - ULONG nRet = pStm->Write( pData, nSize ); + sal_uIntPtr nRet = pStm->Write( pData, nSize ); SetError( pStm->GetError() ); return nRet; } @@ -333,10 +333,10 @@ ULONG SvPersistStream::PutData( const void* pData, ULONG nSize ) /************************************************************************* |* SvPersistStream::Seek() *************************************************************************/ -ULONG SvPersistStream::SeekPos( ULONG nPos ) +sal_uIntPtr SvPersistStream::SeekPos( sal_uIntPtr nPos ) { DBG_ASSERT( pStm, "stream not set" ); - ULONG nRet = pStm->Seek( nPos ); + sal_uIntPtr nRet = pStm->Seek( nPos ); SetError( pStm->GetError() ); return nRet; } @@ -351,15 +351,15 @@ void SvPersistStream::FlushData() /************************************************************************* |* SvPersistStream::GetCurMaxIndex() *************************************************************************/ -ULONG SvPersistStream::GetCurMaxIndex( const SvPersistUIdx & rIdx ) const +sal_uIntPtr SvPersistStream::GetCurMaxIndex( const SvPersistUIdx & rIdx ) const { // const bekomme ich nicht den hoechsten Index SvPersistUIdx * p = (SvPersistUIdx *)&rIdx; // alten merken - ULONG nCurIdx = p->GetCurIndex(); + sal_uIntPtr nCurIdx = p->GetCurIndex(); p->Last(); // Bereiche nicht ueberschneiden, deshalb nur groessere Indexe - ULONG nMaxIdx = p->GetCurIndex(); + sal_uIntPtr nMaxIdx = p->GetCurIndex(); // wieder herstellen p->Seek( nCurIdx ); return nMaxIdx; @@ -368,9 +368,9 @@ ULONG SvPersistStream::GetCurMaxIndex( const SvPersistUIdx & rIdx ) const /************************************************************************* |* SvPersistStream::GetIndex() *************************************************************************/ -ULONG SvPersistStream::GetIndex( SvPersistBase * pObj ) const +sal_uIntPtr SvPersistStream::GetIndex( SvPersistBase * pObj ) const { - ULONG nId = (ULONG)aPTable.Get( (ULONG)pObj ); + sal_uIntPtr nId = (sal_uIntPtr)aPTable.Get( (sal_uIntPtr)pObj ); if( !nId && pRefStm ) return pRefStm->GetIndex( pObj ); return nId; @@ -379,7 +379,7 @@ ULONG SvPersistStream::GetIndex( SvPersistBase * pObj ) const /************************************************************************* |* SvPersistStream::GetObject) *************************************************************************/ -SvPersistBase * SvPersistStream::GetObject( ULONG nIdx ) const +SvPersistBase * SvPersistStream::GetObject( sal_uIntPtr nIdx ) const { if( nIdx >= nStartIdx ) return aPUIdx.Get( nIdx ); @@ -393,7 +393,7 @@ SvPersistBase * SvPersistStream::GetObject( ULONG nIdx ) const #define LEN_2 0x40 #define LEN_4 0x20 #define LEN_5 0x10 -UINT32 SvPersistStream::ReadCompressed +sal_uInt32 SvPersistStream::ReadCompressed ( SvStream & rStm /* Aus diesem Stream werden die komprimierten Daten gelesen */ @@ -405,14 +405,14 @@ UINT32 SvPersistStream::ReadCompressed [R"uckgabewert] - UINT32 Das nicht komprimierte Wort wird zur"uckgegeben. + sal_uInt32 Das nicht komprimierte Wort wird zur"uckgegeben. [Querverweise] */ { - UINT32 nRet(0); - BYTE nMask; + sal_uInt32 nRet(0); + sal_uInt8 nMask; rStm >> nMask; if( nMask & LEN_1 ) nRet = ~LEN_1 & nMask; @@ -430,7 +430,7 @@ UINT32 SvPersistStream::ReadCompressed rStm >> nMask; nRet |= nMask; nRet <<= 16; - USHORT n; + sal_uInt16 n; rStm >> n; nRet |= n; } @@ -456,7 +456,7 @@ void SvPersistStream::WriteCompressed ( SvStream & rStm,/* Aus diesem Stream werden die komprimierten Daten gelesen */ - UINT32 nVal /* Dieser Wert wird komprimiert geschrieben */ + sal_uInt32 nVal /* Dieser Wert wird komprimiert geschrieben */ ) /* [Beschreibung] @@ -474,30 +474,30 @@ void SvPersistStream::WriteCompressed { #ifdef STOR_NO_OPTIMIZE if( nVal < 0x80 ) - rStm << (BYTE)(LEN_1 | nVal); + rStm << (sal_uInt8)(LEN_1 | nVal); else if( nVal < 0x4000 ) { - rStm << (BYTE)(LEN_2 | (nVal >> 8)); - rStm << (BYTE)nVal; + rStm << (sal_uInt8)(LEN_2 | (nVal >> 8)); + rStm << (sal_uInt8)nVal; } else if( nVal < 0x20000000 ) { - // hoechstes BYTE - rStm << (BYTE)(LEN_4 | (nVal >> 24)); - // 2. hoechstes BYTE - rStm << (BYTE)(nVal >> 16); - rStm << (USHORT)(nVal); + // hoechstes sal_uInt8 + rStm << (sal_uInt8)(LEN_4 | (nVal >> 24)); + // 2. hoechstes sal_uInt8 + rStm << (sal_uInt8)(nVal >> 16); + rStm << (sal_uInt16)(nVal); } else #endif { - rStm << (BYTE)LEN_5; + rStm << (sal_uInt8)LEN_5; rStm << nVal; } } //========================================================================= -UINT32 SvPersistStream::WriteDummyLen() +sal_uInt32 SvPersistStream::WriteDummyLen() /* [Beschreibung] Die Methode schreibt 4 Byte in den Stream und gibt die Streamposition @@ -505,11 +505,11 @@ UINT32 SvPersistStream::WriteDummyLen() [R"uckgabewert] - UINT32 Die Position hinter der L"angenangabe wird zur"uckgegeben. + sal_uInt32 Die Position hinter der L"angenangabe wird zur"uckgegeben. [Beispiel] - UINT32 nObjPos = rStm.WriteDummyLen(); + sal_uInt32 nObjPos = rStm.WriteDummyLen(); ... // Daten schreiben ... @@ -522,13 +522,13 @@ UINT32 SvPersistStream::WriteDummyLen() */ { #ifdef DBG_UTIL - UINT32 nPos = Tell(); + sal_uInt32 nPos = Tell(); #endif - UINT32 n0 = 0; + sal_uInt32 n0 = 0; *this << n0; // wegen Sun sp // keine Assertion bei Streamfehler DBG_ASSERT( GetError() != SVSTREAM_OK - || (sizeof( UINT32 ) == Tell() -nPos), + || (sizeof( sal_uInt32 ) == Tell() -nPos), "keine 4-Byte fuer Langenangabe" ); return Tell(); } @@ -536,20 +536,20 @@ UINT32 SvPersistStream::WriteDummyLen() //========================================================================= void SvPersistStream::WriteLen ( - UINT32 nObjPos /* die Position + 4, an der die L"ange geschrieben + sal_uInt32 nObjPos /* die Position + 4, an der die L"ange geschrieben wird. */ ) /* [Beschreibung] Die Methode schreibt die Differenz zwischen der aktuellen und - nObjPos als UINT32 an die Position nObjPos -4 im Stream. Danach + nObjPos als sal_uInt32 an die Position nObjPos -4 im Stream. Danach wird der Stream wieder auf die alte Position gestellt. [Beispiel] Die Differenz enth"alt nicht die L"angenangabe. - UINT32 nObjPos = rStm.WriteDummyLen(); + sal_uInt32 nObjPos = rStm.WriteDummyLen(); ... // Daten schreiben ... @@ -561,19 +561,19 @@ void SvPersistStream::WriteLen <SvPersistStream::ReadLen>, <SvPersistStream::WriteDummyLen> */ { - UINT32 nPos = Tell(); - UINT32 nLen = nPos - nObjPos; + sal_uInt32 nPos = Tell(); + sal_uInt32 nLen = nPos - nObjPos; // die Laenge mu� im stream 4-Byte betragen - Seek( nObjPos - sizeof( UINT32 ) ); + Seek( nObjPos - sizeof( sal_uInt32 ) ); // Laenge schreiben *this << nLen; Seek( nPos ); } //========================================================================= -UINT32 SvPersistStream::ReadLen +sal_uInt32 SvPersistStream::ReadLen ( - UINT32 * pTestPos /* Die Position des Streams, nach dem Lesen der + sal_uInt32 * pTestPos /* Die Position des Streams, nach dem Lesen der L"ange, wird zur"uckgegeben. Es darf auch NULL "ubergeben werden. */ ) @@ -583,7 +583,7 @@ UINT32 SvPersistStream::ReadLen und <SvPersistStream::WriteLen> geschrieben wurde. */ { - UINT32 nLen; + sal_uInt32 nLen; *this >> nLen; if( pTestPos ) *pTestPos = Tell(); @@ -593,15 +593,15 @@ UINT32 SvPersistStream::ReadLen //========================================================================= // Dateirormat abw"arts kompatibel #ifdef STOR_NO_OPTIMIZE -#define P_VER (BYTE)0x00 +#define P_VER (sal_uInt8)0x00 #else -#define P_VER (BYTE)0x01 +#define P_VER (sal_uInt8)0x01 #endif -#define P_VER_MASK (BYTE)0x0F -#define P_ID_0 (BYTE)0x80 -#define P_OBJ (BYTE)0x40 -#define P_DBGUTIL (BYTE)0x20 -#define P_ID (BYTE)0x10 +#define P_VER_MASK (sal_uInt8)0x0F +#define P_ID_0 (sal_uInt8)0x80 +#define P_OBJ (sal_uInt8)0x40 +#define P_DBGUTIL (sal_uInt8)0x20 +#define P_ID (sal_uInt8)0x10 #ifdef STOR_NO_OPTIMIZE #define P_STD P_DBGUTIL #else @@ -611,9 +611,9 @@ UINT32 SvPersistStream::ReadLen static void WriteId ( SvStream & rStm, - BYTE nHdr, - UINT32 nId, - USHORT nClassId + sal_uInt8 nHdr, + sal_uInt32 nId, + sal_uInt16 nClassId ) { #ifdef STOR_NO_OPTIMIZE @@ -624,12 +624,12 @@ static void WriteId { if( (nHdr & P_OBJ) || nId != 0 ) { // Id nur bei Zeiger, oder DBGUTIL - rStm << (BYTE)(nHdr); + rStm << (sal_uInt8)(nHdr); SvPersistStream::WriteCompressed( rStm, nId ); } else { // NULL Pointer - rStm << (BYTE)(nHdr | P_ID_0); + rStm << (sal_uInt8)(nHdr | P_ID_0); return; } } @@ -646,9 +646,9 @@ static void WriteId static void ReadId ( SvStream & rStm, - BYTE & nHdr, - UINT32 & nId, - USHORT & nClassId + sal_uInt8 & nHdr, + sal_uInt32 & nId, + sal_uInt16 & nClassId ) { nClassId = 0; @@ -668,19 +668,19 @@ static void ReadId nId = SvPersistStream::ReadCompressed( rStm ); if( (nHdr & P_DBGUTIL) || (nHdr & P_OBJ) ) - nClassId = (USHORT)SvPersistStream::ReadCompressed( rStm ); + nClassId = (sal_uInt16)SvPersistStream::ReadCompressed( rStm ); } } //========================================================================= void SvPersistStream::WriteObj ( - BYTE nHdr, + sal_uInt8 nHdr, SvPersistBase * pObj ) { #ifdef STOR_NO_OPTIMIZE - UINT32 nObjPos = 0; + sal_uInt32 nObjPos = 0; if( nHdr & P_DBGUTIL ) // Position fuer Laenge merken nObjPos = WriteDummyLen(); @@ -698,17 +698,17 @@ SvPersistStream& SvPersistStream::WritePointer SvPersistBase * pObj ) { - BYTE nP = P_STD; + sal_uInt8 nP = P_STD; if( pObj ) { - ULONG nId = GetIndex( pObj ); + sal_uIntPtr nId = GetIndex( pObj ); if( nId ) nP |= P_ID; else { nId = aPUIdx.Insert( pObj ); - aPTable.Insert( (ULONG)pObj, (void *)nId ); + aPTable.Insert( (sal_uIntPtr)pObj, (void *)nId ); nP |= P_OBJ; } WriteId( *this, nP, nId, pObj->GetClassId() ); @@ -723,15 +723,15 @@ SvPersistStream& SvPersistStream::WritePointer } //========================================================================= -UINT32 SvPersistStream::ReadObj +sal_uInt32 SvPersistStream::ReadObj ( SvPersistBase * & rpObj, - BOOL bRegister + sal_Bool bRegister ) { - BYTE nHdr; - UINT32 nId = 0; - USHORT nClassId; + sal_uInt8 nHdr; + sal_uInt32 nId = 0; + sal_uInt16 nClassId; rpObj = NULL; // Spezifikation: Im Fehlerfall 0. ReadId( *this, nHdr, nId, nClassId ); @@ -751,7 +751,7 @@ UINT32 SvPersistStream::ReadObj "object already exist" ); SvCreateInstancePersist pFunc = rClassMgr.Get( nClassId ); - UINT32 nObjLen(0), nObjPos(0); + sal_uInt32 nObjLen(0), nObjPos(0); if( nHdr & P_DBGUTIL ) nObjLen = ReadLen( &nObjPos ); if( !pFunc ) @@ -772,9 +772,9 @@ UINT32 SvPersistStream::ReadObj if( bRegister ) { // unbedingt erst in Tabelle eintragen - ULONG nNewId = aPUIdx.Insert( rpObj ); + sal_uIntPtr nNewId = aPUIdx.Insert( rpObj ); // um den gleichen Zustand, wie nach dem Speichern herzustellen - aPTable.Insert( (ULONG)rpObj, (void *)nNewId ); + aPTable.Insert( (sal_uIntPtr)rpObj, (void *)nNewId ); DBG_ASSERT( !(nHdr & P_DBGUTIL) || nId == nNewId, "read write id conflict: not the same" ); } @@ -809,7 +809,7 @@ SvPersistStream& SvPersistStream::ReadPointer SvPersistBase * & rpObj ) { - ReadObj( rpObj, TRUE ); + ReadObj( rpObj, sal_True ); return *this; } @@ -843,14 +843,14 @@ SvStream& operator << SvStream * pOldStm = rThis.GetStream(); rThis.SetStream( &rStm ); - BYTE bTmp = 0; + sal_uInt8 bTmp = 0; rThis << bTmp; // Version - UINT32 nCount = (UINT32)rThis.aPUIdx.Count(); + sal_uInt32 nCount = (sal_uInt32)rThis.aPUIdx.Count(); rThis << nCount; SvPersistBase * pEle = rThis.aPUIdx.First(); - for( UINT32 i = 0; i < nCount; i++ ) + for( sal_uInt32 i = 0; i < nCount; i++ ) { - BYTE nP = P_OBJ | P_ID | P_STD; + sal_uInt8 nP = P_OBJ | P_ID | P_STD; WriteId( rThis, nP, rThis.aPUIdx.GetCurIndex(), pEle->GetClassId() ); rThis.WriteObj( nP, pEle ); @@ -870,23 +870,23 @@ SvStream& operator >> SvStream * pOldStm = rThis.GetStream(); rThis.SetStream( &rStm ); - BYTE nVers; + sal_uInt8 nVers; rThis >> nVers; // Version if( 0 == nVers ) { - UINT32 nCount = 0; + sal_uInt32 nCount = 0; rThis >> nCount; - for( UINT32 i = 0; i < nCount; i++ ) + for( sal_uInt32 i = 0; i < nCount; i++ ) { SvPersistBase * pEle; // Lesen, ohne in die Tabellen einzutragen - UINT32 nId = rThis.ReadObj( pEle, FALSE ); + sal_uInt32 nId = rThis.ReadObj( pEle, sal_False ); if( rThis.GetError() ) break; // Die Id eines Objektes wird nie modifiziert rThis.aPUIdx.Insert( nId, pEle ); - rThis.aPTable.Insert( (ULONG)pEle, (void *)nId ); + rThis.aPTable.Insert( (sal_uIntPtr)pEle, (void *)nId ); } } else @@ -897,19 +897,19 @@ SvStream& operator >> } //========================================================================= -ULONG SvPersistStream::InsertObj( SvPersistBase * pObj ) +sal_uIntPtr SvPersistStream::InsertObj( SvPersistBase * pObj ) { - ULONG nId = aPUIdx.Insert( pObj ); - aPTable.Insert( (ULONG)pObj, (void *)nId ); + sal_uIntPtr nId = aPUIdx.Insert( pObj ); + aPTable.Insert( (sal_uIntPtr)pObj, (void *)nId ); return nId; } //========================================================================= -ULONG SvPersistStream::RemoveObj( SvPersistBase * pObj ) +sal_uIntPtr SvPersistStream::RemoveObj( SvPersistBase * pObj ) { - ULONG nIdx = GetIndex( pObj ); + sal_uIntPtr nIdx = GetIndex( pObj ); aPUIdx.Remove( nIdx ); - aPTable.Remove( (ULONG)pObj ); + aPTable.Remove( (sal_uIntPtr)pObj ); return nIdx; } |