Age | Commit message (Collapse) | Author |
|
Previously, the call to 'ColorPaletteAdapter::setColorPalette' from
the 'ColorPickerAdapter' constructur (via 'initializeColorPalette')
would not just set the color palette, but also apply the color at
index (0, 0) to the current selection, since
'ColorPaleteAdapter::setPosition' calls
'colorPaletteListener.applyColor' after setting the position.
This is an undesirable side effect, and led to the situation described
in tdf#115698 that cell A1 would always get black background when
opening a spreadsheet in the Android viewer, since black is the color
at 'color_palette[0][0]' by default and cell A1 is explicitly selected
when Calc first opens, s. the 'CalcHeadersController' constructor.
For Writer, something similar could be reproduced by selecting a
word in a document using long-tap. If experimental editing mode was
enabled, that word got black background (other words selected
later didn't).
To avoid this, make 'ColorPaletteAdapter::setColorPalette' just set
the color palette and set back the values that indicate what is
selected but don't apply any color. (And make 'setColorPalette'
just take the palette as parameter, and set 0 for both start values,
as the only caller was doing as well).
Change-Id: I0fa720ac6550102701a2c82905c9720aab6daab2
Reviewed-on: https://gerrit.libreoffice.org/85044
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
Tested-by: Michael Weghorn <m.weghorn@posteo.de>
|
|
The comment mentioning "Calc has a fixed zoom at 1x
and doesn't allow zooming for now" was there since
support for the Calc UI was added in commit
02f3c4848ab52358bfee56c570a19a3a071574f2 ("Calc UI
on Android Viewer") in 2017. That seems no longer to be
the case however, probably since commit
498dceb43f870bf9e380f1f87e99c6ccadf1963c
("sc lok: Implement hi-dpi and zoom for spreadsheets.").
Zooming in and out was working just fine when I tested this
with Android Viewer using a spreadsheet containing some text
and numbers, as well as a chart and an image.
Therefore, allow zooming for Calc as well.
Don't allow to set min zoom below the page width for Calc as
somewhat suggested by the existing comment ("applies to all
types of document; in the future spreadsheets may be
singled out"). I don't see a particular reason for this and
using 0f for minZoom would break double-tap zoom.
Change-Id: Ib08439edbbac59a00005213b533df5792da965ee
Reviewed-on: https://gerrit.libreoffice.org/84421
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
|
|
Forces gold as the linker; but according to the switches that were used,
I suppose gold was used previously anyway, so hopefully not really a
problem.
Change-Id: I7bc54abf0d3b4b3d86d53e4ea6f01146cf196216
Reviewed-on: https://gerrit.libreoffice.org/81905
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
(cherry picked from commit fa145a035fbab652ec8f3ee870e44e43dd1d770a)
Reviewed-on: https://gerrit.libreoffice.org/81915
|
|
fixup from 93ee955c5359e283e2fe88e45b4c02a60525ed11
Change-Id: I94fa357e982bdf6a74bc182a51fb562ac39c0090
|
|
code reads a .ui file to show a menu to edit/delete that pagebreak. That
file was not packaged in the Android viewer and causes an exception that
is not handled and ultimately results in a crash.
Change-Id: Ie73d886daf9202ba12e1b5a241bc7b6d184ae770
Reviewed-on: https://gerrit.libreoffice.org/83104
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
There was a mismatch between the define DICT_JA_ZH_IN_DATAFILE (which
is effectively set for android as well via DISABLE_DYNLOADING in
i18npool/Library_i18npool.mk and the makefile rules to actually compile
the data files and set the DICT_JA_ZH_IN_DATAFILE define in other places
that were guarded by checks for iOS.
Change-Id: Ia0f117220ab3bad92093a3bf6c613aa9c4812ed4
Reviewed-on: https://gerrit.libreoffice.org/83102
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
when the user wildly switches documents in fast succession, mDocument
can be null - not creating a cache file definitely is better than a hard
crash....
Also onSaveInstanceState is meant for lightweight operations (e.g.
storing what file was openend and what position it was scrolled to), not
for backend-storing of data, so move creation of cache file to onStop
instead.
Change-Id: I2452ef24e309ea4a9594eb723e893798b9b47d98
Reviewed-on: https://gerrit.libreoffice.org/82774
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
typie is ArrayList<Float> - and code divides by/multiplies by zoom
factor later on, so won't keep whole numbers/changing remaining code to
Long would require rounding or reworking the rest of the code as well...
fallout from https://gerrit.libreoffice.org/#/c/82572/
Change-Id: I3f3c46c59f9a310bf48b8cb8b533fe51c9d6645e
Reviewed-on: https://gerrit.libreoffice.org/82775
Tested-by: Jenkins
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
|
|
Change-Id: I8c7fcc64ea958cd98aa32002725536d71f4a6ec5
Reviewed-on: https://gerrit.libreoffice.org/82588
Tested-by: Jenkins
Reviewed-by: Michael Weghorn <m.weghorn@posteo.de>
|
|
This simplifies lots of logic in the clients, making it trivial to get
good row/column header alignment at any zoom. Ultimately TWIPS here are
highly misleading print-twips, and in this state are ~impossible to map
to pixels accurately unless all data is present back to the origin
(which is not the current approach).
Change-Id: I6ca30e77865b62e886e23860f7c23350e544c9fc
Reviewed-on: https://gerrit.libreoffice.org/82572
Tested-by: Jenkins
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
|
|
it is a bogus message and should have been "no such file or directory"
instead... license.txt wasn't shipped after the change to generate it
from xml/single-source.
Change-Id: I907a57ec359cf31ddc7967af2acd11ef3ff605eb
|
|
While it might not be the original problem, at least that is the current
problem the tinderbox provided builds have and should make it work again
Change-Id: Ifaedb3304622286cfe7a6cb49e862a359b53f892
|
|
This partially reverts a7f6338875931d8afff55cb39ead8f6600af04cb. The
problem is that with that approach, the problems with unwinding as
described in 312eeeee42cb4a1e356943e17305555e41afc4ef were plaguing the
Online-based Android app, leading to mysterious crashes with stack
traces like:
#00 pc 0005f2b6 /apex/com.android.runtime/lib/bionic/libc.so (abort+166) (BuildId: 68c87e04526a60689ecb5deb329804a0)
#01 pc 05caaae7 /data/app/libreoffice.debug-fBEOIUwPHY3_k3eQid159Q==/lib/arm/liblo-native-code.so (BuildId: 1c3d0e6336ddfc3578e1c186944160252a750b8b)
...
#06 pc 07452e43 /data/app/libreoffice.debug-fBEOIUwPHY3_k3eQid159Q==/lib/arm/liblo-native-code.so (BuildId: 1c3d0e6336ddfc3578e1c186944160252a750b8b)
#07 pc 0005a37c /apex/com.android.runtime/lib/bionic/libc.so (__restore_rt) (BuildId: 68c87e04526a60689ecb5deb329804a0)
#08 pc 0005f2b2 /apex/com.android.runtime/lib/bionic/libc.so (abort+162) (BuildId: 68c87e04526a60689ecb5deb329804a0)
#09 pc 07565d3b /data/app/libreoffice.debug-fBEOIUwPHY3_k3eQid159Q==/lib/arm/liblo-native-code.so (BuildId: 1c3d0e6336ddfc3578e1c186944160252a750b8b)
...
#11 pc 07565641 /data/app/libreoffice.debug-fBEOIUwPHY3_k3eQid159Q==/lib/arm/liblo-native-code.so (BuildId: 1c3d0e6336ddfc3578e1c186944160252a750b8b)
#12 pc 0001e394 /apex/com.android.runtime/lib/bionic/libm.so (__gnu_Unwind_RaiseException+108) (BuildId: 0ee3a75927e0da4fa0fe29469ccf8b39)
#13 pc 0001eee8 /apex/com.android.runtime/lib/bionic/libm.so (_Unwind_RaiseException+20) (BuildId: 0ee3a75927e0da4fa0fe29469ccf8b39)
Change-Id: Ie4e7b20380c9104770229a8d30036ad76093283d
Reviewed-on: https://gerrit.libreoffice.org/81485
Tested-by: Jenkins
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
|
|
Just specify:
--with-android-ndk=$HOME/Android/Sdk/ndk-bundle
--with-android-sdk=$HOME/Android/Sdk
in your autogen.input, install the appropriate components via Android
Studio and you are done.
Change-Id: Ic99790b781b9017eb4e642380e230d6f7b49e9b7
Reviewed-on: https://gerrit.libreoffice.org/81228
Tested-by: Jenkins CollaboraOffice <jenkinscollaboraoffice@gmail.com>
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
(cherry picked from commit 246f1b5b4485b7db9f9584e4b3b819c87e331c0e)
Reviewed-on: https://gerrit.libreoffice.org/81328
Tested-by: Jenkins
|
|
Change-Id: Icf2a34500acc18b28f113c85366bf24edc6d20b9
Reviewed-on: https://gerrit.libreoffice.org/78695
Tested-by: Jenkins
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
|
|
To complete this:
https://gerrit.libreoffice.org/#/c/78312/
This is a massive replace for lines ending with
".." instead of "..."
It passed "make check" on Linux.
Change-Id: I07fa7b2e30ba9ea17a1f9a5e21c57216ba958efe
Reviewed-on: https://gerrit.libreoffice.org/78356
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
Tested-by: Jenkins
|
|
support for targeting API 14 and 15 was removed in NDK 18, so set
minimum version to 16
mips support was removed in NDK 17
Clang now takes care about correct linking with libc++ shared or
static, so don't manually specify them anymore.
Same with __ANDROID_API_LEVEL__ define and the sysroot / isystem
handling, that is all covered by a single -target <triple><version>
simplifying things quite a bit.
also align ownloud sdk values with main build.gradle
Change-Id: Ib3ae4484e52214677e826270b731ecf7c5c15445
Reviewed-on: https://gerrit.libreoffice.org/77104
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
Typically application should handle key press/release and multiple
actions. The onKeyPreIme may be used to handle some keys early and it's
not needed for writing text. And even if there would be a reason to use
it, then it should return true to notify that the event was handled
(otherwise we will get onKeyDown event for the same key).
Change-Id: I49ce7f411fac92ff86ca042a7f7467e910e46350
Reviewed-on: https://gerrit.libreoffice.org/66708
Tested-by: Jenkins
Reviewed-by: Samuel Mehrbrodt <Samuel.Mehrbrodt@cib.de>
|
|
Change-Id: If8bb944417da9a0aa6343d7dc87e7a1931689f1f
Reviewed-on: https://gerrit.libreoffice.org/74149
Tested-by: Jenkins
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
|
|
The second case is very likely mistaken though.
Change-Id: I6bfc55800a6b26ce0ae6d3645e4179dc5f683205
|
|
DefaultFileFilter setting
Change-Id: I5ed924d9d79db169b11a0561b89da9b57eb078d9
Reviewed-on: https://gerrit.libreoffice.org/66971
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
|
|
Change-Id: I356871429f2e26d9d34e0e1428334a4d2287b683
Reviewed-on: https://gerrit.libreoffice.org/67295
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
|
|
Change-Id: I54ab0fd193e0a133a49462f456fb2fe120494bee
Reviewed-on: https://gerrit.libreoffice.org/70170
Tested-by: Jenkins
Reviewed-by: Jens Carl <j.carl43@gmx.de>
|
|
Change-Id: Ic9fd97a2ff8a6d96ffcc7ad300ef30201d786528
Reviewed-on: https://gerrit.libreoffice.org/67876
Tested-by: Jenkins
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
|
|
Change-Id: I433376dfea0a43c63827ba15308a614f3466fb71
Reviewed-on: https://gerrit.libreoffice.org/67875
Tested-by: Jenkins
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
|
|
And used for LibreOfficeKit directly, without a JNI wrapper.
Change-Id: If4231f53b579417b6c9c90b39541193bf2e8f27c
Reviewed-on: https://gerrit.libreoffice.org/67874
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
Tested-by: Jan Holesovsky <kendy@collabora.com>
|
|
Useful when you switch sdk to a different location.
Change-Id: I95301cc9adf50a0bbd918cc7562b8871093625b8
Reviewed-on: https://gerrit.libreoffice.org/67873
Tested-by: Jenkins
Reviewed-by: Jan Holesovsky <kendy@collabora.com>
|
|
Change-Id: Ib630bb2d5465fe8fd20df152e2da70eabbff2a16
Reviewed-on: https://gerrit.libreoffice.org/66894
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
Tested-by: Julien Nabet <serval2412@yahoo.fr>
|
|
...to select the experimental ...Editing... Android build variant. (Ignored
for non-Android builds, but using libo_FUZZ_ARG_ENABLE anyway, just in case.)
Change-Id: I670925ff358039e38edc29db69f48a78d484f133
Reviewed-on: https://gerrit.libreoffice.org/65077
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
It had been left out in 4082a18406c18af7b4fcef7bd501c3679c3be56b "android: use
unified headers and llvm-c++ STL (x86) with NDK 16" because "arm unfortunately
crashes with llvm-c++, so keep with gnustl for now/fix that later".
Making armeabi-v7a work with libc++ etc. required a number of changes, listed
below, in this commit and in preceding ones. At least 32-bit x86 already worked
with libc++ etc. prior to these changes in view mode, though it crashed in the
experimental editing mode (enabled with strippedUIEditing in
android/soruce/Makefile) as soon as one types in something, But it is not
entirely clear to me why 32-bit x86 view mode didn't also fail similar to how I
saw armeabi-v7a fail. (On 32-bit x86, these changes appear to neither improve
nor worsen the current state, view mode still appears to work fine while editing
still crashes upon typing anything. With these changes, editing mode on
armeabi-v7a appears to work fine. But I tested armeabi-v7a only with a real
device and 32-bit x86 only with an emulator, in case that might make a
difference.)
* Preceding <https://gerrit.libreoffice.org/#/c/64964/> "Move NSSLIBS to a more
sensible place on the linker command line" plus this change's addition of
-lunwind to the liblo-native-code.so linker command line make sure that
liblo-native-code.so uses _Unwind_* functions from libunwind.a, instead of
erroneously picking up the ones from libgcc.a that happen to be included in
NSSLIB's nspr4 (-lgcc is automatically added to the end of the linker command
line by the invoking compiler, that's how libgcc.a's _Unwind_* end up in
NSSLIB's nspr4; it is neither clear to me why NSSLIB's nspr4, being a pure C
library, uses _Unwind_* functions, nor why exception handling in
liblo-native-code.so fails when using _Unwind_* functions from libgcc.a
instead of from libunwind on armeabi-v7a, nor why that would work on 32-bit
x86, but that's what I observed: ModuleManager::identify
(framework/source/services/modulemanager.cxx) throws a
css::lang::IllegalArgumentException, which calls __cxa_throw ->
_Unwind_RaiseException, which ultimately lead to odd misbehavior and
std::abort during stack unwinding when using _Unwind_RaiseException from
libgcc.a instead of from libunwind). (There is no libunwind.* in
android-ndk-r16b for 32-bit x86 at least, so is presumably using _Unwind_*
functions from libgcc.a. It doesn't appear to make a difference if it
indirectly uses those _Unwind_* functions from NSSLIB's nspr4, or directly
from libgcc.a included in liblo-native-code.so if the
$(if $(filter armeabi-v7a,$(ANDROID_APP_ABI)),-lunwind)
had a ",-lgcc" else branch.)
* Preceding <https://gerrit.libreoffice.org/#/c/64965/> "Export RTTI symbols
from liblo-native-code.so, for binary UNO bridge" makes sure that excpetions
thrown from the binary UNO bridge can be caught by compiled catch clauses.
Not sure why the corresponding state of
bridges/source/cpp_uno/gcc3_linux_intel shouldn't have run into the same
issue.
* Preceding <https://gerrit.libreoffice.org/#/c/64966/> "Adapt gcc3_linux_arm
__cxa_exception to NDK 18 libc++abi" makes sure that our version of
__cxa_exception matches the version from libc++abi. This is clearly not
relevant for 32-bit x86. (The comment there android-ndk-r18b, but the
additional member is already present in
android-ndk-r16b/sources/cxx-stl/llvm-libc++abi/src/cxa_exception.hpp, too.)
The remainder of this change just drops old armeabi-v7a--specific workarounds
that are no longer needed/no longer work.
Change-Id: Ief4c2d562c5032abe6c3b94ca3b3394be6fcd4d3
Reviewed-on: https://gerrit.libreoffice.org/64973
Tested-by: Stephan Bergmann <sbergman@redhat.com>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
This will become important when switching armeabi-v7a to
libc++/libc++abi/libunwind (coming soon) which uses address instead of string
comparison when checking for type equality, so that exceptions thrown from the
binary UNO bridge will need to use the exact same RTTI objects as referenced
from the compiled catch clauses.
Change-Id: If8bcb39212b5f5e154aee215cb5f471fe2dc4a7b
Reviewed-on: https://gerrit.libreoffice.org/64965
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
511ae02c6457e69cb6daab871acd9c3e7d64e2e3 "Android: Enable HAVE_FEATURE_NSS and
package the NSS libraries with apk" had added them to WHOLELIBS probably just
because that already had the $(addprefix -l,...), even though --whole-archive
doesn't make any sense for shared libraries. Better place them later on the
linker command line (after all our own archives and compiler support libraries),
so that switching armeabi-v7a to libc++/libc++abi/libunwind (coming soon) will
be able to override erroneously picking _Unwind_* symbols from NSSLIBS's nspr4
instead of libunwind.
Change-Id: Ie0c0b7a55da3eabe1bb427232d698b2a4af63e78
Reviewed-on: https://gerrit.libreoffice.org/64964
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I079c4efd28e7e0d10ca6edf242ddd85b9294db08
Reviewed-on: https://gerrit.libreoffice.org/64962
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I767cc1d512345aa20570001033ddb4d882e3ca35
Reviewed-on: https://gerrit.libreoffice.org/62362
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
This patch is sponsored by ULAKBIM/Pardus project.
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: I6361e3d23b03e5463d165f7f02dacad8be9206da
Reviewed-on: https://gerrit.libreoffice.org/62861
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
Change-Id: If54c26f66466ee591d198aaf3f8f68ba04e5f4b3
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/62774
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
This patch is sponsored by ULAKBIM/Pardus project.
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: Ic56991b2957be91822d040d776a3dfcef2d5b451
Reviewed-on: https://gerrit.libreoffice.org/62753
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
missing break causes bug on buttons on Formatting tab
This patch is sponsored by ULAKBIM/Pardus project.
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: I8a20b542aa319591e9dea5591ed554954222d690
Reviewed-on: https://gerrit.libreoffice.org/62756
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
ignore hidden files statment is obsolete because
we put option on settings whether they are shown or not
This patch is sponsored by ULAKBIM/Pardus project.
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: Ibba7ed76c20a189cff04e330a4493b3e84e5dba2
Reviewed-on: https://gerrit.libreoffice.org/62754
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
This patch is sponsored by ULAKBIM/Pardus project.
Change-Id: Ia890f8c3f8d638beb4c06bf1c73d49f7b0fac72a
Signed-off-by: Gulsah Kose <gulsah.1004@gmail.com>
Reviewed-on: https://gerrit.libreoffice.org/62769
Tested-by: Jenkins
|
|
More hardcoded strings extrated to the resource file
Few Turkish language improvements
This patch is sponsored by ULAKBIM/Pardus project.
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: I9c49d1b8ec3dfc88a19832a2cdea2c7cbaf2be42
Reviewed-on: https://gerrit.libreoffice.org/62757
Tested-by: Jenkins
Reviewed-by: Gülşah Köse <gulsah.1004@gmail.com>
|
|
We ask READ_EXTERNAL_STORAGE permission on first start
then check WRITE_EXTERNAL_STORAGE permission on switching
between document providers. This causes problems on Android 8+
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Change-Id: Ia7290e33b2a55f5a2197374ca39c60998edfff72
Reviewed-on: https://gerrit.libreoffice.org/62269
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
Tested-by: Jenkins
|
|
Change-Id: I0b2f1ca5386510e3a8217cf3bb3e08a940f438f7
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/61788
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: I05a189dcee9cf4415ce59771da03c08cf0fef6c4
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/60727
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: Ie2276ac162062e7365c9605f98fe03e5011ba6cb
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/60688
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
Tested-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: If576aaf3e5095e660219fed9f5e11971c9a73469
Signed-off-by: Mert Tumer <merttumer7@gmail.com>
Reviewed-on: https://gerrit.libreoffice.org/59293
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: I2f43818dbf490de10a54da7f36c6bae3d4d62e39
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/59289
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: I13c7f3e085095f1c0d88ab3668557fcc1c4cb23a
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/58900
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
Tested-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: I89d0ca239e3a713979f84a77a66d6da95aad234d
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/58826
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
Change-Id: Ieecfad2d0127fec850f7a4f3576a77eec94926b3
Signed-off-by: Mert Tumer <merttumer@outlook.com>
Reviewed-on: https://gerrit.libreoffice.org/58562
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|