Age | Commit message (Collapse) | Author |
|
Change-Id: I3a9b2ff1fa24ea4d28b29644d6bf6519fdb1909c
|
|
...for whatever reason. Failure is
> AddressSanitizer:DEADLYSIGNAL
> =================================================================
> ==16438==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x2b6ba8bfe65c bp 0x7ffca100f290 sp 0x7ffca100ba28 T0)
> ==16438==The signal is caused by a READ memory access.
> ==16438==Hint: address points to the zero page.
> #0 0x2b6ba8bfe65b (<unknown module>)
>
> AddressSanitizer can not provide additional info.
> SUMMARY: AddressSanitizer: SEGV (<unknown module>)
> ==16438==ABORTING
> /home/tdf/lode/jenkins/workspace/lo_ubsan/testtools/CustomTarget_uno_test.mk:25: recipe for target '/home/tdf/lode/jenkins/workspace/lo_ubsan/workdir/CustomTarget/testtools/uno_test.done' failed
(<https://ci.libreoffice.org/job/lo_ubsan/1177/>, but also seen with local ASan+
UBSan builds.)
Started to fail with 98f5f97d4a4206ecfb0754e1901d9c44a3287d82 "make --enable-ld
the default for debug builds, if available". (lld would automatically be
disabled by configure.ac because it doesn't support --dynamic-list-cpp-typeinfo
as needed by UBSan.)
Change-Id: I7bfbfc4c879cbad7748e5855c22698eec5efc94c
|
|
(cf. LO's configure.ac, needed for external/firebird on non-x86[-64]), but
org.freedesktop.Sdk//18.08 apparently doesn't provide it (while
org.freedesktop.Sdk//1.6 apparently did)
(cf. <https://github.com/flathub/org.libreoffice.LibreOffice/pull/67/commits/
b2762523a4678bedd55c11db232868cbaf9c7bdd> "aarch64 and arm need libatomic_ops")
Change-Id: I6eb060251ce85bfd399b72d9c90a93497a3a9029
Reviewed-on: https://gerrit.libreoffice.org/66987
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
This reverts commit 81434a0f9afea2185f5e59be09ac73f363baeb92, which is no longer
needed, see 5ae3f1fb1863af109e73f464097bdeda29113d4d "Re-enable --enable-werror
for Jenkins' gerrit_linux_gcc_release job".
|
|
This reverts commit 7990bfd3998508dd3454c408613cf66e53af56eb, which is no longer
needed, see 5ae3f1fb1863af109e73f464097bdeda29113d4d "Re-enable --enable-werror
for Jenkins' gerrit_linux_gcc_release job".
Conflicts:
distro-configs/Jenkins/Linux_rel_master.conf
Change-Id: I90725ecbef0e0cbd908c3d4d9e87ab2336f567c5
|
|
...now that an optimized -Werror build with contemporary GCC should work fine
again after a bunch of recent commits (fed7c3deb3f4ec81f78967c2d7f3c4554398cb9d
"Slience bogus -Werror=maybe-uninitialized" et al)
Change-Id: I912d5dec9eb28b7e2a46cb350dcfed1ede55cb78
Reviewed-on: https://gerrit.libreoffice.org/66666
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
see <https://github.com/flathub/org.libreoffice.LibreOffice/issues/57>
"OpenJDK 11 is available".
Change-Id: Ie24ed7349ca9a4a57c1a8d18d10b29c4a37e259c
Reviewed-on: https://gerrit.libreoffice.org/65830
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
To not increase the size of the main org.libreoffice.LibreOffice app further,
the plan was to realize this as an org.libreoffice.LibreOffice.Help extension.
Ideally, this would be a localized extension, so that, by default, only a
relevant subset of the extension would be downloaded and installed. (But see
below.)
There are multiple technical problems, as discussed at <https://github.com/
flathub/org.libreoffice.LibreOffice/issues/35#issuecomment-447295308> "Add
integrated LibreOffice Help offline":
* LO can't pass a file URL with query part to xdg-open, so uses a temporary
wrapper .html file that redirects to the target URL. But for the flatpak case
this wrapper can't be in /tmp (which isn't visible from outside the flatpak
sandbox), but is instead stored in a new temp dir under $XDG_CACHE_HOME (which
is always set for flatpaks and /is/ visible form the outside) that is
removed on LO exit.
* The file URL stored in the temp file must be rewritten from the internal path
(/app/libreoffice/help/...) to the path as seen outside the flatpak sandbox.
While the path for the org.libreoffice.LibreOffice /app is stored in
/.flatpak-info, the external path for the org.libreoffice.LibreOffice.Help
extension is different and not stored there. So use a hack trying to
construct that path from what information is available in /.flatpak-info.
* But the help content consists of locale-specific and shared files, and those
reference each other with relative links. But a localized flatpak extension
cannot contain shared files, it can only contain per-language sub-dirs. And
if the shared help files were kept out of the extension, as part of the app
itself, the relative paths among these files inside the flatpak sandbox would
differ from those outside of it, so would be broken when viewing the content
in the external browser. A solution would either (a) need to somehow rewrite
the content of all the help files being served from LO to the external
browser, or (b) replicate the shared help files in all the extension's per-
language sub-dirs (and if some localization uses en-US content as a fallback
for only part of its translated content, e.g., in the case of media files,
would need to also replicate that en-US content), or (c) use a non-localized
extension that always contains the content for all localizations.
For now, I chose the third approach. This makes the
org.libreoffice.LibreOffice.Help extension relatively large (the current
/app/libreoffice/help tree has a size of ca. 100MB), so that I decided to not
have it downloaded and installed automatically ("no-autodownload": true in
solenv/flatpak-manifest.in). (I checked with Flatpak 1.0.6 that if the
extension should be changed to a localized one with the same name in the future,
updating from an older version would work. If the old extension was not
installed, just the relevant localizations of the new version will be downloaded
and installed. If the old extension was installed, the full set of
localizations of the new version will be downloaded and installed.)
(As also mentioned at <https://github.com/flathub/org.libreoffice.LibreOffice/
issues/35#issuecomment-447295308>: "A second, minor, nuisance is that, for
security reasons, an `xdg-open file:///...html` call from a flatpak leads to an
intermediate popup dialog letting the user chose which application to use to
open the URI, while e.g. an `xdg-open http:///...html` is allowed to go directly
to the user's preferred browser. So accessing help content from LO flatpak
would present that popup dialog first, forcing the user to select a browser to
proceed.")
Change-Id: I35f5a23947dd551dc1b9bff1dd2abd6710073b5f
Reviewed-on: https://gerrit.libreoffice.org/65451
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I4a4c4ee111d6a22c899ae0d288ae04d760ec996a
Reviewed-on: https://gerrit.libreoffice.org/65272
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
KDE4 is out of maintenance upstream since Nov. 2014, and binaries
provided by TDF have switched to KDE5 as the official backend.
Change-Id: I165465b56d3ba3a18912b203c06ae8fc6111c0c9
Reviewed-on: https://gerrit.libreoffice.org/60014
Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Tested-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
|
|
Change-Id: I9980f60ebe4cef26348fc26af6b56245260abcca
Reviewed-on: https://gerrit.libreoffice.org/64937
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...similar to d3f2c61e3b9faf577f692ece76cd830f0f74b028 "Make Jenkins
linux_gcc_release_64 pick up Developer Toolset 7":
> /lo/home/tdf/lode/jenkins/workspace/lo_daily_update_gandalf/sal/osl/unx/pipe.cxx: In function ‘oslPipeImpl* osl_psz_createPipe(const sal_Char*, oslPipeOptions, oslSecurity)’:
> /lo/home/tdf/lode/jenkins/workspace/lo_daily_update_gandalf/sal/osl/unx/pipe.cxx:248:12: error: ‘char* strncpy(char*, const char*, size_t)’ output may be truncated copying 107 bytes from a string of length 4096 [-Werror=stringop-truncation]
> strncpy(addr.sun_path, name, sizeof(addr.sun_path) - 1);
> ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
(<https://ci.libreoffice.org/job/lo_daily_update_gandalf/558/>).
Change-Id: I443337969dfdcd02a350a171e68d5032b5be22a0
|
|
...now that gandalf (which all of these jobs may run on) has been updated (see
d27d75f86cf8ea4fd87e2cd64b58cc8c0ac0029a "Revert 'Enabling Developer Toolset 7
for Jenkins' lo_tb_random_config_linux'"):
* <https://ci.libreoffice.org/job/lo_daily_update_gandalf/> aka
"lo_daily_update_gandalf", configured with
--distro-config="LibreOfficeLinuxUpdater"
* <https://ci.libreoffice.org/job/lo_tb_ui_testing_linux/> aka
"lo_tb_ui_testing_linux", configued with --distro-config="rel_master"
* <https://ci.libreoffice.org/job/lo_tb_master_linux/> aka "Tinderbox on Master
for Linux", configured with --distro-config="rel_master"
Change-Id: If8afe079cc45e06ea95124e56fa974fd3aca2c78
Reviewed-on: https://gerrit.libreoffice.org/63991
Reviewed-by: Markus Mohrhard <markus.mohrhard@googlemail.com>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
Tested-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I4cb2ff5393822c6ec982126b3e0a676374cce033
|
|
...similar to d3f2c61e3b9faf577f692ece76cd830f0f74b028 "Make Jenkins
linux_gcc_release_64 pick up Developer Toolset 7":
> In file included from /opt/rh/devtoolset-7/root/usr/include/c++/7/vector:69:0,
> from /home/tdf/lode/jenkins/workspace/lo_tb_master_linux/jvmfwk/plugins/sunmajor/pluginlib/sunjavaplugin.cxx:39:
> /opt/rh/devtoolset-7/root/usr/include/c++/7/bits/vector.tcc: In function ‘javaPluginError jfw_plugin_startJavaVirtualMachine(const JavaInfo*, const JavaVMOption*, sal_Int32, JavaVM**, JNIEnv**)’:
> /opt/rh/devtoolset-7/root/usr/include/c++/7/bits/vector.tcc:407:15: error: variable ‘__new_finish’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
> pointer __new_finish(__new_start);
> ^~~~~~~~~~~~
> cc1plus: all warnings being treated as errors
(<https://ci.libreoffice.org/job/lo_tb_master_linux/32166/>).
Change-Id: Ifae8705bfafe4caed21713909ff6eeee158f1361
|
|
...aka "Tinderbox on Master for Linux-DbgUtil",
<https://ci.libreoffice.org/job/lo_tb_master_linux_dbg/>. This is similar to
ab8454eb26f72f2d4081d90cb7e60e53e4a5590d "Enabling Developer Toolset 7 for
Jenkins' lo_tb_master_linux_dbg". However, unlike lo_tb_master_linux_dbg, which
is restricted to CentOS-based tb75-lilith, lo_tb_master_linux is restricted to
label TB_Rel, which is currently matched to CentOS-based tb75-lilith,
tb76-maggie, and tb76-pollux, plus non-CentOS based gandalf. The latter thus
doesn't have Developer Toolset 7, so setting CC/CXX this way won't work for
gandalf. I'm thus removing gandalf from
<https://ci.libreoffice.org/label/TB_Rel/>.
Change-Id: Ied305476347d107db4087f710c05300c84ae7e85
Reviewed-on: https://gerrit.libreoffice.org/64444
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
This reverts commit 74d6476a045ff2cad36deac51228712d992fb98b. Developer
Toolset 7 has apparently not yet been installed on vm139 (the node exclusively
executing this job), see
<https://ci.libreoffice.org/job/lo_callgrind_linux/6525/console>:
> checking for gcc... /opt/rh/devtoolset-7/root/usr/bin/gcc
> checking whether the C compiler works... no
> configure: error: in `/home/buildslave/lode/jenkins/workspace/lo_callgrind_linux':
> configure: error: C compiler cannot create executables
> See `config.log' for more details
> Error running configure at /home/buildslave/lode/jenkins/workspace/lo_callgrind_linux/autogen.sh line 296.
|
|
...aka "Callgrind Linux", <https://ci.libreoffice.org/job/lo_callgrind_linux/>
Change-Id: I518e579ec4ca7b36f700ed412d86feef37c3e203
|
|
This reverts commit 4d72f292cb8adf7529ec1d9ab8fb6728e9717543. Developer
Toolset 7 has apparently not yet been installed on gandalf (the node exclusively
executing this job), see
<https://ci.libreoffice.org/job/lo_tb_random_config_linux/1623/console>:
> checking for gcc... /opt/rh/devtoolset-7/root/usr/bin/gcc
> checking whether the C compiler works... no
> configure: error: in `/lo/home/tdf/lode/jenkins/workspace/lo_tb_random_config_linux':
> configure: error: C compiler cannot create executables
> See `config.log' for more details
> Error running configure at ./autogen.sh line 296.
|
|
...aka "Random Config Linux builder",
<https://ci.libreoffice.org/job/lo_tb_random_config_linux/>
Change-Id: I5a22526b8dcbed8e6fc9cd1fcc7db90774afb0ff
|
|
...aka "Tinderbox on Master for Linux-DbgUtil",
<https://ci.libreoffice.org/job/lo_tb_master_linux_dbg/>
Change-Id: Icf99063e7aaf620cb13dd6ba869f98660f2de82a
Reviewed-on: https://gerrit.libreoffice.org/63982
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Enabling it in the relevant distro-configs/Jenkins/* file is more intuitive than
enabling it in autogen.sh (and avoids issues like
d057e61cb5aae15ea37ce9ac824647cd2060e331 "Restrict Developer Toolset to
Config=linux_gcc_release_64"), and will also be used for other Jenkins jobs like
<https://gerrit.libreoffice.org/#/c/63982/> "Enabling Developer Toolset 7 for
Jenkins' lo_tb_master_linux_dbg".
Change-Id: If633044a90c35a12a73d60335839af0a106aa20f
Reviewed-on: https://gerrit.libreoffice.org/63989
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...as discussed at
<https://lists.freedesktop.org/archives/libreoffice/2018-November/081423.html>
"Re: Compiler baselines".
It doesn't look exactly right to enable the Developer Toolset from autogen.sh.
But the alternative would be to "hide" that in
<https://ci.libreoffice.org/job/gerrit_linux_gcc_release/configure>, which would
probably not be helpful when developers try to track down why a certain Jenkins
build behaves the way it does. So pragmatically stick it in autogen.sh. (Also,
it puts Developer Toolset on the PATH whenever it is found on a system using
LODE_HOME, not just for the specific Config=linux_gcc_release_64 case. Lets see
how that works out in practice.)
However, it turns out that the Developer Toolset 7's GCC 7.3.1 with
--enable-werror (that is implicitly enabled for LODE-driven builds in
configure.ac) and (implicit) --enable-optimized produces many false warnings
(i.e., errors), see below for a sample. (Actually, my experience is that
contemporary GCC hardly ever work with -Werror in optimized builds, due to
analysis being done on already optimized code; it surprised me to find out that
the Jnekins linux_gcc_release_64 builds were apparently successfully done with
--enable-werror with GCC 4.8.5.) So explicitly --disable-werror for these
builds. (Which means that <https://gerrit.libreoffice.org/plugins/gitiles/lode/
+/b82e0a9d26ef4c81046c053ff831dccfc84c56be%5E!> "For linux_gcc_release_64, don't
let ccache strip comments" could probably be reverted again if it has negative
impact on Jenkins' performance.)
Some of the false warnings encountered:
> [CXX] jvmfwk/plugins/sunmajor/pluginlib/sunjavaplugin.cxx
> In file included from /opt/rh/devtoolset-7/root/usr/include/c++/7/vector:69:0,
> from /home/tdf/sberg/core/jvmfwk/plugins/sunmajor/pluginlib/sunjavaplugin.cxx:39:
> /opt/rh/devtoolset-7/root/usr/include/c++/7/bits/vector.tcc: In function ‘javaPluginError jfw_plugin_startJavaVirtualMachine(const JavaInfo*, const JavaVMOption*, sal_Int32, JavaVM**, JNIEnv**)’:
> /opt/rh/devtoolset-7/root/usr/include/c++/7/bits/vector.tcc:407:15: error: variable ‘__new_finish’ might be clobbered by ‘longjmp’ or ‘vfork’ [-Werror=clobbered]
> pointer __new_finish(__new_start);
> ^~~~~~~~~~~~
> cc1plus: all warnings being treated as errors
> [CXX] libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx: In function ‘gboolean gtv_calc_header_bar_draw(GtkWidget*, cairo_t*)’:
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:89:117: error: ‘aRectangle._cairo_rectangle_int::height’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> cairo_move_to(pCairo, rRectangle.x + rRectangle.width / 2 - extents.width / 2, rRectangle.y + rRectangle.height / 2 + extents.height / 2);
> ~~~~~~~~~~~~~~~~~~^~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:102:22: note: ‘aRectangle._cairo_rectangle_int::height’ was declared here
> GdkRectangle aRectangle;
> ^~~~~~~~~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:89:59: error: ‘aRectangle._cairo_rectangle_int::width’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> cairo_move_to(pCairo, rRectangle.x + rRectangle.width / 2 - extents.width / 2, rRectangle.y + rRectangle.height / 2 + extents.height / 2);
> ~~~~~~~~~~~~~~~~~^~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:102:22: note: ‘aRectangle._cairo_rectangle_int::width’ was declared here
> GdkRectangle aRectangle;
> ^~~~~~~~~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:89:97: error: ‘aRectangle._cairo_rectangle_int::y’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> cairo_move_to(pCairo, rRectangle.x + rRectangle.width / 2 - extents.width / 2, rRectangle.y + rRectangle.height / 2 + extents.height / 2);
> ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:102:22: note: ‘aRectangle._cairo_rectangle_int::y’ was declared here
> GdkRectangle aRectangle;
> ^~~~~~~~~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:89:40: error: ‘aRectangle._cairo_rectangle_int::x’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
> cairo_move_to(pCairo, rRectangle.x + rRectangle.width / 2 - extents.width / 2, rRectangle.y + rRectangle.height / 2 + extents.height / 2);
> ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
> /home/tdf/sberg/core/libreofficekit/qa/gtktiledviewer/gtv-calc-header-bar.cxx:102:22: note: ‘aRectangle._cairo_rectangle_int::x’ was declared here
> GdkRectangle aRectangle;
> ^~~~~~~~~~
> cc1plus: all warnings being treated as errors
> [CXX] svl/source/misc/lockfilecommon.cxx
> /home/tdf/sberg/core/svl/source/misc/lockfilecommon.cxx: In static member function ‘static rtl::OUString svt::LockFileCommon::GetCurrentLocalTime()’:
> /home/tdf/sberg/core/svl/source/misc/lockfilecommon.cxx:190:10: error: ‘%02d’ directive writing between 2 and 5 bytes into a region of size between 1 and 9 [-Werror=format-overflow=]
> OUString LockFileCommon::GetCurrentLocalTime()
> ^~~~~~~~~~~~~~
> /home/tdf/sberg/core/svl/source/misc/lockfilecommon.cxx:190:10: note: directive argument in the range [0, 65535]
> /home/tdf/sberg/core/svl/source/misc/lockfilecommon.cxx:190:10: note: directive argument in the range [0, 65535]
> /home/tdf/sberg/core/svl/source/misc/lockfilecommon.cxx:204:24: note: ‘sprintf’ output between 17 and 31 bytes into a destination of size 20
> sprintf( pDateTime, "%02d.%02d.%4d %02d:%02d", aDateTime.Day, aDateTime.Month, aDateTime.Year, aDateTime.Hours, aDateTime.Minutes );
> ~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> cc1plus: all warnings being treated as errors
Change-Id: I3a851b7591274a8cf8b4729ae036afeb8e82eedc
Reviewed-on: https://gerrit.libreoffice.org/63884
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...to see whether the Coverity issue has solved itself by now (see
0f3b0ec973f06a98c75ef8acfa720a9973e4d2b5 "Avoid C++17 mode for Coverity Scan"
for details)
Change-Id: I1086d6b79217af51a84e347a0d13f323429b37d0
|
|
It doesn't have all the images that dialogs need, for instance the
vcl/res/radio1.png.
Change-Id: If7839fecb2358846b92d46a47cce3b97f7556711
|
|
It belongs in an autogen.input, not in a distro-configs file.
Change-Id: I2e22f94fe9e11986fa40a632e12a272193172bac
|
|
Change-Id: Ia42daaf0dbb8fcd0230c7cee21a0f5d560885c22
|
|
Change-Id: If6149dce7a0467a73720e9ea40e54705518f3316
|
|
Change-Id: Ibbc167ca736012e7585694885370c1505ad48499
Reviewed-on: https://gerrit.libreoffice.org/59939
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
* Fix make distro-pack-install.
* Remove Xorg dependency.
* Remove stack protector workaround.
* Update distro-config and enabled features.
Change-Id: I273dc8343ad84bd77b86453cc01ff427b50ea0b5
Reviewed-on: https://gerrit.libreoffice.org/58634
Tested-by: Jenkins
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
|
|
...in 26b40fcfc67480e75bd9959b0c5cb9db10fdf6a1 "Moving mysqlc into connectivity
as a library", apparently without replacement
Change-Id: Ia1d32f98bd90efe2fcd4441dd84cd1862a4daa70
|
|
Change-Id: I60319d22c192b068860b1959350a602edf19aea4
Reviewed-on: https://gerrit.libreoffice.org/58916
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: I0b6c2d116496da64f91cb5cafb81b69e02366d96
Reviewed-on: https://gerrit.libreoffice.org/58743
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I731e9bcae221d72286f13d5ab8a117e1f1f92052
|
|
...as suggested in comment <https://github.com/flathub/
org.libreoffice.LibreOffice/issues/48#issuecomment-399739393> to "LibreOffice
6.0.5": "Should 'Flatpak version' be just 'Flatpak' to save translation of
'version' in the string for non-English locales?"
Change-Id: I53171a5725f54520ae9e3cbaf294e291d16e1c78
Reviewed-on: https://gerrit.libreoffice.org/56390
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...see 02248e9e191f798f96218a0c4d281f99e15bea31 "solenv/flatpak-manifest.in:
Disable debug information again, for now" commit message
Change-Id: I4a9f8c547a50e8a8c83b5f96768949867aa4bb7b
Reviewed-on: https://gerrit.libreoffice.org/55453
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
see <https://github.com/flathub/org.libreoffice.LibreOffice/issues/42>
"OpenJDK 10 is now available".
Change-Id: Iaae9d22d91d984a5c11eee26bd05ab7d328d7a5b
Reviewed-on: https://gerrit.libreoffice.org/55422
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: Ie0e8b8b7ad59ee640d6b195dfae1a7cf745056fd
Reviewed-on: https://gerrit.libreoffice.org/54543
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
|
|
Change-Id: I8d3c639bfeb6797a5d61ea21e55ac23da1504120
|
|
Change-Id: Ic8f4afe8f46b5f0c36eeffdbb04b3cc652884ab4
|
|
In addition to the options in this file, the following are present in
our autogen.input for the 6.0 branch:
--disable-ccache
--enable-macosx-code-signing=<redacted>
--enable-macosx-package-signing=<redacted>
--with-external-tar=/Users/tml/lo/src
--with-lang=bg br ca ca-valencia cy cs da de el en-US en-GB es et eu fi fr ga gd gl hr hu id is it ja km lt lv nb nl nn pl pt\
pt-BR ro ru sk sl sv ta tr uk zh-CN zh-TW
--with-macosx-bundle-identifier=com.collabora.libreoffice-free
--with-product-name=LibreOffice Vanilla
--with-package-version=<depends on version>
--with-referenced-git=/Users/tml/lo/core
--without-parallelism
The language list is a guesstimate of what localisations are good
enough. Suggestions of languages that should be dropped (or added)
welcome.
(We don't want a language with immediately visible holes (in top level
menus or common dialogs) in the translation coverage. That is an
insult to a user who would want to use that language and worse than
not providing a localisation in that language at all. In my opinion.)
Change-Id: I0dd1c2848cd964f6bf9e17d95d1735b81b235b1c
|
|
...now that 14955ed91b282ccbb395cb47c6d76e3b42b34748 "external/firebird: Support
Clang ASan" allows to
Change-Id: I339ec464a085853e1b6789a544b8f64932f1322d
|
|
We cannot silently convert user data or their used file formats
and then await them to accept it or reinstall an older version.
Let us make a soft change instead of an hard (heart) break
and avoid us to been attacked with fire and forks from our users.
This reverts commit 8d381ae8d6c742a7e15bf7ad9e07b65f81728ef6.
Change-Id: Ia153640935e355771acb85cf652f8fe4c21fafbb
Reviewed-on: https://gerrit.libreoffice.org/52731
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tamás Bunth <btomi96@gmail.com>
|
|
Change-Id: Id4cfb69079f0150c9cca2626c16df7fab441d916
Reviewed-on: https://gerrit.libreoffice.org/52611
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tamás Bunth <btomi96@gmail.com>
|
|
...from <https://github.com/flathub/org.libreoffice.LibreOffice/>:
commit 7a2393f5fcab8c6938180c4718f2c61acd495528
Author: Robert McQueen <rob@endlessm.com>
Date: Tue Apr 3 10:41:22 2018 +0100
port to freedesktop.org 1.6 runtime
Gtk+3/GIO/etc dependencies used by LO in "GNOME" mode are actually
included in the freedesktop.org runtime. Try to build against fd.o
by downgrading gst-libav (fd.o has gst 1.10 rather than gnome's 1.12),
bundling dbus-glib and disable Gtk+ 2.
commit 42650da01f270e86bfb40035a9194b23ccf24c4c
Author: Robert McQueen <rob@endlessm.com>
Date: Tue Apr 3 11:23:27 2018 +0100
fix up LD_LIBRARY_PATH with gcc7
Append to library path rather than resetting it (causes build failures
due to overriding /app/lib).
commit 3e4c655294c8124cb54e1c651ec4dc1230b8151e
Author: Robert McQueen <rob@endlessm.com>
Date: Tue Apr 3 11:25:02 2018 +0100
fixup solenv/bin/assemble_flatpak.sh
Use mkdir -p to be robust to other modules (ie dbus-glib) creating
some of the paths before we do.
commit d1d449ffa837b1de876f524494dbce09ec92ce73
Author: Robert McQueen <rob@endlessm.com>
Date: Wed Apr 4 15:50:49 2018 +0100
split resource/registry data into Locales extension
Move the language-specific data into the /app/share/runtime path which
flatpak-builder splits into the Locale extension if we re-enable
separate-locales. We symlink the original locations back to these paths, which
means we have dangling symlinks depending on which Locale sutpaths are
installed.
Include Stephan Bergmann's patch from https://gerrit.libreoffice.org/#/c/52381/
to make the configmgr robust to such dangling links.
commit ad6674f166c68fb79e19d80950a104a0a33f81dc
Author: Robert McQueen <rob@endlessm.com>
Date: Wed Apr 4 16:05:28 2018 +0100
make locale split glob more specific
This loop will fail if the share/registry/res folder gains any .xcd
files which are not named fcfg_langpack_* or registry_* so just to
be safe, only glob these files.
Change-Id: Icd41d7077b9f308dbb196927715b210328709662
Reviewed-on: https://gerrit.libreoffice.org/52642
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
where the Yocto-based GNOME SDK provides no python lxml, but building LO's
internal one fails because it internally uses {xml2,xslt}-config, and those are
broken by (mis?-)design in Yocto, just returning with exit code 1.
It didn't work well to pass applications of pkg-config into the external/lxml
build as replacements for --with-{xml2,xslt}-config (as is successfully done
elsewhere with 1462b2784fa3e95499808b2ef706e4787a01aaae "Adapt the
external/redland/raptor/xml2-config.patch to raptor2-2.0.15"), so just run
gla11y in its slightly limited form without lxml in the Flatpak build.
Change-Id: I2d42901373c8c861b16da385c37bcc24d6e783fd
Reviewed-on: https://gerrit.libreoffice.org/51321
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
* Obviously VCL wiring is missing, but most components do build.
Change-Id: Ie853ada1423a8f4c2b647be59cd47a7730c42978
Reviewed-on: https://gerrit.libreoffice.org/50293
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
|
|
Change-Id: I219d556f8e124cfe426cc1ac3c54da34eb7ef790
Reviewed-on: https://gerrit.libreoffice.org/49925
Reviewed-by: Michael Meeks <michael.meeks@collabora.com>
Tested-by: Jenkins <ci@libreoffice.org>
|
|
see 90d2155912bcee40377620d4836726041a72d537 for boost fix and
see effe6b3d84302afce3d5095e4f376e7e3bf669e0 for bridges fix for mac
Change-Id: Ic6209ce0927dafd39763ef0b2fabbcaa7abf743f
Reviewed-on: https://gerrit.libreoffice.org/46002
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
Tested-by: Jenkins <ci@libreoffice.org>
|
|
gnustl (and others) are to be removed in future versions of the ndk
also bump gradle and build-tools to current versions along with it
arm unfortunately crashes with llvm-c++, so keep with gnustl for now/fix
that later
Change-Id: Ic794c3293b599b77ec48096bf3283a99c09cbb79
Reviewed-on: https://gerrit.libreoffice.org/45163
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
Tested-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|