Age | Commit message (Collapse) | Author |
|
Change-Id: I224f2ab64188d0df8f4a587af65f6bf80359a9de
Reviewed-on: https://gerrit.libreoffice.org/65006
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I474b5762e6a07982fddc0315a67181399ea4c30e
Reviewed-on: https://gerrit.libreoffice.org/64156
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
This change solves the non-linear World-To-View trans-
formation that calc uses due to it's screen rendering
as good as currently possible (AFAIK).
Calcv view is layouted on pixel base (due to better
homogen distances and full pixel lines between cells),
but this leads to having a non-linear transformation
between discrete units (pixels, view) and model coordinates
(World). In principle, each cell has it's own (so called)
ViewTransformation -> the position on screen depends on
the mappings of all cells top/left from it. This is
obvioulsly non-linear and can sometimes be seen by
producing 'offset' errors when many cells (small and thin)
are shown in low zoom stages.
No better solution for this comes to mind easily. The
extremes are - on the one hand AntiAliasing the whole
calc edit view and accept 'unsharp/AAed' lines - on the
other hand what we have now.
Maybe a future solution could find a mapping that gets
close to linear mapping for the full view. On the long
run this state is hard to keep correct. Even with this
extended solution the mapping of SdrObjects spawning
mutiple cells is assumed 'linear' in that area - which
is in reality currently not the case (!)
Note: This is only true for the screen visualization,
print and/or PDF export do not do that pixel-based
layouting.
Note2: This mechanism is general in DrawingLayer (look
for '.*GridOffset.*'. If it is deactivated by providing
no offsets, the result is the unchanged, linear mapping.
First step: Add interfaces to get a possible GridOffset
at ViewObjectContact. There it belongs, we have a view-
dependent offset per object and view. Add mechanisms to
create on-demand and reach back to the view (aka calc's
derivation of it).
Second step: Implement the on-demand creation, adapt to
use it in ViewObjectContact::getPrimitive2DSequence, add
stuff to reset on zoom change, disable temporarily old
mechanism -> paint already works. Need to adapt the
places from old mechanism where the GridOffset was used,
but no longer the geometry creations.
Third step: Isolated and disabled old mechanism (by
already removing SetGridOffset). Marked all places that
possibly need change with '//Z' tag. Main work now will
be to adapt in the SdrView implementations in svx to know
about having a SdrObject-dependent ViewTransformation
at all (currently not known, was hard-coded at some places
from the old code, ViewTransformation set as MapMode at
a target OutputDevice, not member at SdrView at all...).
Fourth step: Adapt the Handles and OverlayObjects to
use an evtl. existing GridOffset. The mechanism is that
the SdrHdl(s) can be seen as 'Model-Objects', these get
converted to OverlayObjects in the ::CreateB2dIAObject()
implementations, for all SdrMarkView and SdrPageView,
so this is the place where the ObjectContact is known
(the SdrPageWindow *is* a ObjectContact) and the view-
dependent GridOffset can be calculated per SdrObject.
I modified OverlayObject to be able to work with a
set Offset that embeds the created visualization using
this additionally.
Handles get now correctly set and have a working HitTest
(due to that already using the primitives). Some inter-
action stuff already working, some will need more
adaption. We simply have no concept for this stuff...
Refactored to not get dependencies to SdrObject in
ObjectContact.
Fifth Step: Make HitTest work by adding the View-And-
Object dependent GridOffset in the View when HitTest
is triggered. This is in SdrMarkView::CheckSingleSdrObjectHit
where pObj->GetCurrentBoundRect() is used that gets the
view-independent form. To make HitTest work, add a possible
GridOffset.
Since this will be necessary more often in SdrView hierarchy,
added a tooling method (getPossibleGridOffsetForSdrObject)
at that level after checking that at that level will be
reachable at all potential spots.
Inside that method the correct ObjectContact will be identified
and the object-specific offset requested there.
Sixth Step: Adaptions and started some cleanups. Still some
adaptions needed:
- After creation of new object, need to relocate from
used GridOffset setting to WorldCoordinates
- Interactions, e.g. start with dragging handles or full
object/points
Seventh Step: React on EndCreateObj. Here, the created
SdrObject is in model coordinates and needs to be adapted
to evtl. GridOffset. This is 'tricky' due to calculating
the possible offset based on new coordinates 'close'
to the target position, but may be in the wrong cell.
Nonetheless this is the best we can do here.
Last (hopefully) missing are now all interaction
viszualizations. They already work and are applied
correctly, but wrong visualized.
Have taken the time to unify adding OverlayObjects for
selection visualization to OverlayManager, see
handleNewOverlayObject. This does all needed when adding
OverlayObjects in one place where the GridOffset can
also be handled. It makles things more safe - not possible
to forget one of the three steps for others.
Eighth Step: Do the same unification for creating the
OverlayGeometry, also rename methods to make usage more
clear. We now have
SdrHdl::insertNewlyCreatedOverlayObjectForSdrHdl
SdrDragMethod::insertNewlyCreatedOverlayObjectForSdrDragMethod
which can do the needed GridOffset changes centralized.
Needed to get a ObjectContact for this at SdrDragMethod,
so adapted ::CreateOverlayGeometry implementations
accordingly. Missing is now the implementation in
insertNewlyCreatedOverlayObjectForSdrDragMethod to add
the GridOffset - if used. This has no SdrObject at this
time, so we will need a fallback to do the same using a
Range (Rectangle). The stuff doing this for SdrObject
already has a fallback and is based on using the Rectangle
from the SdrObject anyways, so this will be possible.
Ninth Step: Cleanup of old stuff (no more //Z), adapted
some usages of OverlayObject creations to use
getViewIndependentPrimitive2DContainer instead of the
view dependent parts so that offset applied to
drag-overlays is correct and not already added. Adapted
insertNewlyCreatedOverlayObjectForSdrDragMethod to use
calculateGridOffsetForB2DRange. Use now that instead of
SdrObject-based approach in calc - is more generic.
Getting closer, but still not complete - there is an
error with dragging the grepped handle somehow - the
offset for drag is somehow wrong.
Tenth Step: Corrected that offset error. Of course at
interaction start and progress (move) the coordinates
are in GrifOffset coordinates and need to be corrected
to Model coordinates. Done that at ::BegDragObj and
::MovDragObj, works well.
Of course there are exceptions for the crop-handles, so
needed to add setting the correct parameters at SdrHdl
when these got created, then all works as expected.
The strategy is to *not* change the model data itself
in any way, instead do all changes/adaptions in the
view-only code. This has minimal impact and is needed
due to having a 1:n relationship between model and
views anyways.
There are two directions: All visualizations are adapted
to take the GridOffset into account (SdrObjects, overlay,
handles, InteractionObjects, ...). In the other direction
input like MousePosition is in principle in calc EditView
in 'GridOffset'-coordinates and needs to be mapped back
before usage.
Change-Id: I2ecdd409def96a7248a26a65a22e59eb962880a0
Reviewed-on: https://gerrit.libreoffice.org/64057
Tested-by: Jenkins
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
|
|
Found with bin/find-unneeded-includes
Only removal proposals are dealt with here.
Change-Id: Ice2eb8c5994bf2ccb88972332ca4a1d3ed41752a
Reviewed-on: https://gerrit.libreoffice.org/63826
Tested-by: Jenkins
Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
|
|
Change-Id: Iaf1c82ee454139553dbc9fd1b0cf38b9e7971fdd
Reviewed-on: https://gerrit.libreoffice.org/63931
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
and put back original SvTreeListBox a11y factory use
Change-Id: I4ad8ce29d8fed6ec5d44e9a1d641919a89226b79
Reviewed-on: https://gerrit.libreoffice.org/63501
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
u8 literals incompatibly change their type (as implemented by recent Clang
trunk)
Change-Id: Ia4f7b91f5d86656a056303d2754981ab2093a739
Reviewed-on: https://gerrit.libreoffice.org/63494
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I94df3aa40fa79877ccebf1ed8709bd7cc47748d9
Reviewed-on: https://gerrit.libreoffice.org/63398
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: Id2df31daa596a18c79af5fc6ea162deb6e24d5af
Reviewed-on: https://gerrit.libreoffice.org/62958
Tested-by: Jenkins
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
|
|
Change-Id: I04a146d3d8a428ac1678827dc883525c40240a44
Reviewed-on: https://gerrit.libreoffice.org/62787
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: Id5489f3e8f1d3ced3d57b56f8d3a7a4818af0fca
Reviewed-on: https://gerrit.libreoffice.org/62377
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
Tested-by: Jenkins
|
|
separate translations for Spacing: vs Margins:
separate translations for Inch vs cm
Change-Id: I9a2d8fe3ad0edde5afefe00258f1309f898130e8
Reviewed-on: https://gerrit.libreoffice.org/62699
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
The method ImpGetBitmapEx in svdhdl.cxx needs special single
marker files to generate display dependent markers on the fly.
List them in bitmaps.hlst so that they are packed and delivered.
Change-Id: I26d86fa31d82ab623016c9ed0bfb6eb9a3e91a14
Reviewed-on: https://gerrit.libreoffice.org/62488
Tested-by: Jenkins
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
which seem to have snuck back in since the great rounds of removals.
Change-Id: I85f7f5f4801c0b48dae8b50f51f83595b286d6a1
Reviewed-on: https://gerrit.libreoffice.org/62229
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I09d86ee7e156ac71d7c1f9fd58d43751037d2629
Reviewed-on: https://gerrit.libreoffice.org/61761
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: I643e8686e015ca85dd96221f1c93038f4fddf27b
Reviewed-on: https://gerrit.libreoffice.org/61182
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I7db0c27ff2213210ed4b46ebbadc1a2f74a18257
Reviewed-on: https://gerrit.libreoffice.org/61249
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
implemeent a reduction approach, which is good at finding virtual
methods that only themselves or their virtual partners.
The accessibility GetVisArea stuff is dead since
commit 891e41fac81fbd8d5cdb277b26639abfd25a7143
Date: Wed Apr 4 11:23:22 2018 +0200
dead code in AccessibleTextHelper_Impl::UpdateVisibleChildren
Change-Id: I78d9d8bca585ecec8394f2c3fe2baa93db0e58f5
Reviewed-on: https://gerrit.libreoffice.org/60912
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
which itself has 5 sub tab pages
Change-Id: If71e91248b5771af4845ad6dba997ac4c7841b5d
Reviewed-on: https://gerrit.libreoffice.org/56112
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: Ifc47bb8e096c9a8563021b2fcb44199577740746
Reviewed-on: https://gerrit.libreoffice.org/59747
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I0308ddd467ab6e283c0503f98885a248eb28290c
Reviewed-on: https://gerrit.libreoffice.org/58738
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
and consequently a whole bunch of related code
leftover from
commit e4eb416c3ef81d098ed61caabd2077cbbb2418bc
remove swapping and link from GraphicObject and Graphic
Change-Id: I2f8a631441e06aa52db6d9ad247e8ae6be1004ed
Reviewed-on: https://gerrit.libreoffice.org/58195
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I5dc6f949edcb34aa110dfa9415e2ac886d0dfa4c
Reviewed-on: https://gerrit.libreoffice.org/56111
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Also remove Light/Dark Violet variants
Place Magenta into the Standard colors list
and Violet into the Tonal colors list
Change-Id: Id27bb5fe62b7c69af39158680ae07d4f1f2efc95
Reviewed-on: https://gerrit.libreoffice.org/55257
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Heiko Tietze <tietze.heiko@gmail.com>
|
|
Also simplify parent/child relationships, get rid
of double data (SdrPage/Parent infos in SdrObjects,
also in SdrObjList). This is all not needed - when a
SdrObject is inserted to a SdrPage, get SdrPage by
traveling over parents (no double info, member as soon
as inserted, ...).
More cleanups/reworks included, will need some more
cleanups, too.
Stabilizing: SetRectsDirty/DefaultStyleSheet
Had to correct the SetRectsDirty stuff for 3D due to
going down the hierarchy while the 2D implementation
goes the other direction -> endless loops. Added special
handling for 3D stuff for now (will be chnaged again when
SnapRect is no longer needed at SdrObject level).
Also had to adapt how the DefaultStyleSheet is set at
incarnated SdrObjects - better: their properties. Since
we now always have a SdrModel, it is possible to correctly
initialize with the correct default StyleSheet from that
SdrModel.
This needs to be done after ForceDefaultAttributes and in a
way that again deletes Items that are set in the StyleSheet.
This leads to an error in CppunitTest_sd_import_tests where
I checked tdf100491 - it is okay and thus I change the control
instance of the imported, XML-dumped file.
The less hard attributes, the better for Styles in general.
Cleanup of comments for last two commits
Corrected SvxShape::getParent()
Needed to get the direct parent, so test for SdrObject
first (to get SdrObjGroup/E3DScene), for SdrPage second
Fixed CppunitTest_sc_subsequent_export_test
Several problems arose. The used SdrCaptionObj was
Cloned, but the clone not inserted to a SdrPage. This
leads to not being able to access a UNO API imlementation
of the SdrPage (SvxPage) on lower levels.
It worked before due to SdrObject having a SdrPage*
additionally to being added to a SdrPage - this is exactly
the main cleanup this change does.
Looked for why it is cloned, could see no reasons. The
SdrCaptionObj exists during all im/export, not difference
to other SdrObjects (that do not get cloned). It is not
changed in any way. It *might* be to suppress a crash that
happened due to UNO API Service emfio/emfio not being
available in the UnitTest scenario. Interestingly it
did not crash with the cloned SdrCaptionObj, but the
Graphic exported was probably wrong.
Fixed by no longer Cloning the SdrCaptionObj and adding
emfio/emfio UNO API Service.
d139f821a5b39535a3e7b9c6261df7e18f8ae8ac
910e7f4bc628a715fda7545dffaf3369d5e76ea0
ca1de01b723051e09ac37d7ec7bba978beea41c5
3a76da1471dfe75e69847f64a6a3519ad21c8c9c
Change-Id: I986586e326b563acebf00d931a7084c6eb09e5f8
Reviewed-on: https://gerrit.libreoffice.org/54689
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
|
|
Change-Id: I5905fea310a7f29574d94eaf61c80b6ca09a7467
Reviewed-on: https://gerrit.libreoffice.org/54310
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: I7d2dd64beb70d44113c3c548ff6e13ff1d766614
Reviewed-on: https://gerrit.libreoffice.org/54017
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Heiko Tietze <tietze.heiko@gmail.com>
|
|
New set of gradients incl. l10n and ui test
Change-Id: Iee303a39ad721b5a4e8b9adb78ee5a82227b84f4
Reviewed-on: https://gerrit.libreoffice.org/53934
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: andreas_kainz <kainz.a@gmail.com>
|
|
in page number, chapter and outline numbering
in ~30 languages by integrating libnumbertext library.
- offapi: add linguistic2::NumberText
New NumberingType constants:
- ordinal indicators (1st, 2nd, 3rd...)
- cardinal number names (One, Two, Three...)
- ordinal number names (First, Second, Third...)
Note: these numberings are parts of OOXML, too.
Plain text files of Libnumbertext's language data
are installed in share/numbertext (similar to
share/fingerprint), allowing further customization.
Change-Id: I4034da0a40a8c926f14a3f591749a89a8d807d5a
Reviewed-on: https://gerrit.libreoffice.org/53313
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: László Németh <nemeth@numbertext.org>
|
|
Change-Id: I9da160c4d20109ef539e1877968044a168b3e7e2
Reviewed-on: https://gerrit.libreoffice.org/53757
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Contained only a l10n wrapper method above SvxResId
Change-Id: I9ea7537773b40c38835b8fe975e303cc3dc433c1
Reviewed-on: https://gerrit.libreoffice.org/53547
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I9dc6e81149eae3ba2284fa7fe608dd9252503dce
Reviewed-on: https://gerrit.libreoffice.org/53197
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
E3DObjList is not needed, remove. Remove memeber from
E3DObject, derive E3DScene directly from SdrObjList, some
cleanups in SdrObject, too
Change-Id: Ifa4620a800c14faf21f8b80fd4dc1d39f71be804
Reviewed-on: https://gerrit.libreoffice.org/52740
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
|
|
Change-Id: Iab4fb31c975bc19ccd895df9de79c0ad055027c0
Reviewed-on: https://gerrit.libreoffice.org/52746
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
aNeuNam -> aNewName
aWNamMerk -> aWNameMemorized
Change-Id: Iace4b6f84b40c3f989619331636ae059347e167f
Reviewed-on: https://gerrit.libreoffice.org/52192
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Michael Stahl <Michael.Stahl@cib.de>
|
|
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
Reviewed-on: https://gerrit.libreoffice.org/52526
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Armin Le Grand <Armin.Le.Grand@cib.de>
|
|
This reverts commit 6c14c27c75a03e2363f2b363ddf0a6f2f46cfa91.
|
|
SOSAW080: Make SdrModel& prerequisite to SdrObjects
Added need for SdrModel& in constructors of SdrModel,
SdrPage, SdrView and SdrObjList. Builds, not finished.
SOSAW080: removed and replaced old SdrModel
Removed and replaced GetModel()/SetModel() in all using
classes (SdrObject, SdrPage, SdrView), added accessors
to new referenced SdrModel, adapted all accessing places.
Refactored/Extended ::Clone and ::operator== for these
classes to allow cloning objects to a target SdrModel.
Adapted places where this is done AFAP. Added quite some
comments (tagged with 'TTTT') where possible further work
is needed. Builds completely, thus checking in. This does
not mean that this change is done yet.
SOSAW080: Adapted SdrPage/SdrModel relationship
Also needed to work on copy-construction of SdrPage and hierarchy,
quite some stuff removed, no copy-constructor anymore, no
MigrateItemPool stuff. Builds well, test stuck, will need
some cleanup/finetunung
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Smaller corrections/includes adapted
SOSAW080: Debugging/Stabilizing/MakeUnitTestWork
SOSAW080: Stabilized for UnitTests, cleanups
SOSAW080: Adapted GetObjGraphic to just take a const SdrObject&
SOSAW080: Removed ChangeModel from classes
Classes SvxTextEditSource and SvxDrawPage (including
TextEditSource stuff) do not need change of SdrModel
anymore.
SOSAW080: Adapted some comments to make more readable
SOSAW080: Corrected constructor
SOSAW080: getSdrModelFromUnoModel added override marks
SOSAW080: Added missing includes
SOSAW080: Corrected SdrPage constructor
SOSAW080: Corrected some SdrObject::Clone scenarios
Especially when cloning to another SdrModel and taking
the sdr::properties into account.
SOSAW080: Added include for Mac-Build
SOSAW080: Added Scale to DefaultProperties
If a SdrModel change happens in DefaultProperties copy
constructor (used from Clone()), potentially a Scale
for the SfxItems has to be done.
SOSAW080: Added missing include for MacBuild
SOSAW080: Corrected CppunitTest_sc_anchor_test
An adaption of a SdrPathObj instantiation was missing,
added that. Seems as if that test is no tpart of the
usual 'make' scenario, but used/executed in gerrit builds
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Reworked SvxShape to use SdrObject's SdrModel
SOSAW080: Free SdrObjects when SdrModel goes down
In an UNO API test problem is that SvxShapes reference
SdrShapes, but these are not added to a SdrPage and not
'owned' by the SvxShape. Thus these do not get deleted
at all (same in master, memory leak). I extended
SvxShape::Notify the case for ModelCleared to also
Free the SdrObject when not owner and it's not added to
a SdrPage (in that case it gets deleted with deleting
the SdrModel)
SOSAW080: Solve UNO API calls that move SvxShapes to other Model
Due to UNO API tests I got a call to insert an xShape to a
xDrawPage which was constructed in another Model, this has now to
be done by Cloning the SdrObject to the new SdrModel, getting
rid of the old one and getting all the UNO implementation
stuff right (referemces SdrObject <-> xShape).
Change-Id: Iaf53535de0502a481466be74a1768bbb39f0e78c
1cb7d573d323e98a89761fe662c10c4a654fdec0
24617494a0ef79f6e33dfcb02782a833a81c6434
763f39094b6a48b529a6952d01468f8776c97679
242b9e228a9a042c3a5bdd38b1ea6600144276d5
242b9e228a9a042c3a5bdd38b1ea6600144276d5
33a6f3f306b70c223171aef796dd5ee041ad14df
6878b33f8b05738a44c0910e40a60a0f0d1d58ed
0a636caf3cb36c2f9c6cd11aa22cb9bc435dc8f2
8c4626274a5cc531dad27f27c0c45d4c528fb2fb
446685a49a6d67aedd01cfbbd5e87b07f97a4d7b
c1b5ed3c99bc7219a0061e4ece24ea42afd2889a
22de9a1c8af7c25be5c108671ddc548ba323ed47
4caf6b6fbbe6e8130741d793dffb560fd01d4ed5
488b9601735ec1822433f82f633990063951fe08
c366d60299f239e3df856ddffedb19e743e4be0c
c5137ba8c597c7b5f90318df50e87b93a39a28dc
f9e646242cf89f6fde1315046952252a2c429779
f830fbc5fadd89d04be5edd2a5abf9b0d4bf0410
1694b54903df784385abaa8452e1201e12344238
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
17bcb44d2e29920c0c74430c2d9c703b36cfa0ad
7b5c241faec7488924e5935ae8b19f785846b5e4
bf097ee7467895823fbd158a2a9543da3b5a5078
|
|
and SmSymDefineDialog
There's a whole bunch of interrelated stuff which needs to work at the same
time.
add menu support, keyboard support, better mouse support,
a gtk scrollable adaptor to support pseudo scrolling drawing bodge,
plugable uitest support for custom widgets, plugable a11y support
for custom widgets via the existing atk_object_wrapper_new wrapper
for XAccessible
In this specific case, change SvxCharacterMap from something that has an
internal scrollbar to a scrolledwindow where the scrollbar is external, which
drops the need for the a11y impl of SvxCharacterMap to emulate being a scrolled
window and internal table and just needs the table a11y impl
Change-Id: Ia2743d6958021c525a1900154dcbb69ae33fc400
Reviewed-on: https://gerrit.libreoffice.org/52084
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: Ic044a6e4568e707022d87bc5712205fbdf084ba2
Reviewed-on: https://gerrit.libreoffice.org/52067
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
I expect a lot of the overriding methods will be removed as soon as I
run the unusedmethods plugin
Change-Id: I4fb228724fcfba51a98d2113efb93cec1bc15c7c
Reviewed-on: https://gerrit.libreoffice.org/52006
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I82a4a56bf02c6ff2495bd7a6058640d77e8c0b73
Reviewed-on: https://gerrit.libreoffice.org/51832
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I6c515e716b232fecfe1750b806f0a5624f648de5
|
|
Change-Id: I1a817d5575bbd57ecaa874a27158b9218e4210cc
Reviewed-on: https://gerrit.libreoffice.org/51603
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>
|
|
It is now possible to use a single FillGeometry to fill objects that
are made of multiple filled objects (e.g. CustomShapes) so that
they look as using a single fill. This is used for CustomShapes,
but may later be 'extended' to be used for more cases. The basic
functionality was already in the primitives, but had to be added
to SDrObject due to these being used for CustomShapeVisualization
(currently - would be better to change this to primitives, too).
Change-Id: I1d9fb158191a9ec663e46f3911213be2f3d88986
|
|
Fix all comments
Change-Id: Ib11662de5cac3b073114ab4425e8f45a0c04c8c8
Reviewed-on: https://gerrit.libreoffice.org/47058
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Eike Rathke <erack@redhat.com>
|
|
This is preparing to change how GraphicManager works where it
won't base itself around GraphicObject anymore but Graphic. No
functional or cosmetic change was made to the classes, only
changes that were needed because of the move and rename.
The only thing that wasn't moved is the GraphicRenderer as it
is not needed in vcl for now (but makes sense to move it in the
future to keep graphic stuff together).
grfmgr was renamed to GraphicObject as the GraphicManager will be
changed a lot and most likely moved out, so the name grfmgr won't
make any sense anymore.
All the UNO implementations were renamed with a prefix Uno and
used the same name as the class name. This is made to be more
specific which are the Uno objects (for example graphic.cxx
contained the implementation of XGraphic, which is similar to
graph.cxx contains Graphic).
Change-Id: I54a2fa6c7e997469aaa7770db05244adb9f64137
Reviewed-on: https://gerrit.libreoffice.org/51068
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Tomaž Vajngerl <quikee@gmail.com>
|
|
These were no longer used in the code.
This should help me in identifying obsolete and missing HIDs in helpcontent.
Found by this somewhat sophisticated method:
for mod in $(find -name helpids.h) ; do
echo $mod;
for i in $(grep ^#define "$mod" | cut -d " " -f2 ) ; do
if [ $(git grep -c "$i" $(echo "$mod" | cut -d "/" -f 2 ) | wc -l) -eq 1 ] ; then
echo "$i";
fi ;
done
done
Change-Id: Iaf8179322419ce51175bc5a42fedec0add8c5241
Reviewed-on: https://gerrit.libreoffice.org/50680
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Andras Timar <andras.timar@collabora.com>
|
|
Change-Id: I6e72fbe44dcb65ee5162448e9a72e6437d56b044
Reviewed-on: https://gerrit.libreoffice.org/50948
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Akt -> Current in svdibrow
Change-Id: I099858e917dcc725cd02c1b99f0fa61d5c769ae1
Reviewed-on: https://gerrit.libreoffice.org/50703
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Michael Stahl <mstahl@redhat.com>
|