summaryrefslogtreecommitdiff
path: root/testtools
AgeCommit message (Collapse)Author
2021-12-10Generally determine Rdb content from gb_*_set_componentfile callsStephan Bergmann
...instead of by listing the content somewhat redundantly in the Rdb_*.mk files, to avoid duplication of logic for components that are only built conditionally (and thus should only be included conditionally in the corresponding Rdb). To achieve that, add an "rdb" parameter to gb_ComponentTarget_ComponentTarget (and to the gb_*_set_componentfile macros that internally call gb_ComponentTarget_ComponentTarget), which is used to make the appropriate gb_Rdb_add_component call internally from within gb_ComponentTarget_ComponentTarget. (As a special case, gb_CppunitTest_set_componentfile shall not call gb_Rdb_add_component, as that has already been done by the corresponding gb_Library_set_componentfile call, so allow the gb_ComponentTarget_ComponentTarget "rdb" parameter to be empty to support that special case.) Most Rdb_*.mk files are thus mostly empty now. One exception is i18npool/Rdb_saxparser.mk, which duplicates some of the Rdb_services content as needed during the build in CustomTarget_i18npool/localedata. 1c9a40299d328c78c035ca63ccdf22c5c669a03b "gbuild: create services.rdb from built components" had already tried to do something similar (in addition to other things) under a new --enable-services-rdb-from-build option. However, that approach had four drawbacks that this approach here addresses (and which thus partly reverts 1c9a40299d328c78c035ca63ccdf22c5c669a03b): 1 Rdb_services shall not contain the component files of all libraries that are built. While that commit filtered out the component files that go into Rdb_ure/services (ure/Rdb_ure.mk), it failed to filter out the component files that go into others like Rdb_postgresql-sdbc (connectivity/Rdb_postgresql-sdbc.mk). 2 The code added by that commit to Makefile.gbuild codified the knowledge that there is an Rdb_services, which is brittle. 3 The code added by that commit to solenv/gbuild/Rdb.mk codified the knowledge (for gb_Rdb__URECOMPONENTS) that there is an Rdb_ure/services, which is brittle. 4 Introducing an --enable-services-rdb-from-build option needlessly provided two different ways how the content of Rdb_services is assembled. The changes done here would leave --enable-services-rdb-from-build as a misnomer, as it no longer controls how Rdb_services is assembled. I thus renamed it to --enable-customtarget-components, as that is apparently what it still does now. Change-Id: Ia5e8df4b640146c77421fcec6daa11a9cd260265 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/126577 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2021-11-12coverity: annotate with markup so they will stay silencedCaolán McNamara
Change-Id: I8ac0ae4cd64d8171eebd98d89d1fe954280987b9 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/125072 Tested-by: Jenkins Reviewed-by: Caolán McNamara <caolanm@redhat.com>
2021-11-10new loplugin:stringliteraldefineNoel Grandin
look for #define FOO "foo" that can be converted into OUStringLiteral. This is the first pass of this plugin, only doing those #define which are local to a single compilation unit. Change-Id: Ic8610e29ec42c36d03db5014a93c244315d5bbea Reviewed-on: https://gerrit.libreoffice.org/c/core/+/124962 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2021-11-03Prepare for removal of non-const operator[] from Sequence in testtoolsMike Kaganski
Change-Id: If67f845a0350766c7d098a399bd2fae6048c9100 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/124400 Tested-by: Jenkins Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
2021-08-31Fix UNOIDL identifiers that started with lowercase and contained underlinesStephan Bergmann
...which are reserved in UNOIDL (though unoidl-write does not enforce that for now, see the TODO in unoidl/source/sourceprovider-scanner.l, and idlc only warned about it with an explicit -cid option) Change-Id: I529f385e9c263d2dab9baf3b99f0208457da04c1 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/121346 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2021-08-02tdf#143450: Special integre+fp struct return case needs a fix too, of courseStephan Bergmann
...similar to ca344be7aabf88dddde38841e6af6292ece6829b "tdf#143450: Fix special fp+integer struct return case for gcc_*_x86-64" Change-Id: Ia8110d632a1c5f328822c434efc5b09bd53ec9e8 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/119883 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2021-07-28tdf#143450: Fix special fp+integer struct return case for gcc_*_x86-64Stephan Bergmann
For one, the loop in x86_64::fill_struct was backwards. And for another, privateSnippedExecutor does not need special handling of FLOAT and DOUBLE return values (they can simply be moved to %xmm0, as covered by the general case), but rather for those small structs where floating-point member(s) in a first eightbyte (targeting %xmm0) are followed by integer member(s) in a second eightbyte (targeting %rax). Extended testtools to cover two such cases. Change-Id: I8e775a1d1ce2312610f265bcc8e40b09bdac56df Reviewed-on: https://gerrit.libreoffice.org/c/core/+/119576 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2021-05-02throw() -> noexcept, part 2/3: Automatic loplugin:noexcept rewriteStephan Bergmann
Change-Id: I076f16d0536b534abf0ced4d76051eadb4c0e033 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/114949 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2021-04-07Updated README.md files to represent current code / use Markdown formatHossein
Previously, all of the README files have been renamed to README.md and now, the contents of these files were changed to use Markdown format. Other than format inconsistency, some README.md files lacked information about modules, or were out of date. By using LibreOffice / OpenOffice wiki and other documentation websites, these files were updated. Now every README.md file has a title, and some description. The top-level README.md file is changed to add links to the modules. The result of processing the Markdown format README.md files can be seen at: https://docs.libreoffice.org/ Change-Id: Ic3b0c3c064a2498d6a435253b041df010cd7797a Reviewed-on: https://gerrit.libreoffice.org/c/core/+/113424 Tested-by: Jenkins Reviewed-by: Michael Stahl <michael.stahl@allotropia.de> Reviewed-by: Adolfo Jayme Barrientos <fitojb@ubuntu.com>
2021-03-24Using .md extension/Markdown syntax for modules READMEHossein
Renaming all README files for all top level modules to README.md, applying no content change at this stage to be able to track history of the files. These files should be edited to use correct Markdown syntax later. Change-Id: I542fa3f3d32072156f16eaad2211a397cc212665 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/112977 Tested-by: Jenkins Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
2021-01-09fix coverity parse errorsCaolán McNamara
Change-Id: I3a1179947704452e3ffec02be59d0f7bf0b75ab0 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/109017 Tested-by: Jenkins Reviewed-by: Caolán McNamara <caolanm@redhat.com>
2020-12-26New loplugin:stringliteralvarStephan Bergmann
See the comment at the top of compilerplugins/clang/stringliteralvar.cxx for details. (Turned some affected variables in included files into inline variables, to avoid GCC warnings about unused variables.) Change-Id: Ie77219e6adfdaaceaa8b4e590b08971f2f04c83a Reviewed-on: https://gerrit.libreoffice.org/c/core/+/108239 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-12-11Adapt the remaining OUString functions to std string_viewStephan Bergmann
...for LIBO_INTERNAL_ONLY. These had been missed by 1b43cceaea2084a0489db68cd0113508f34b6643 "Make many OUString functions take std::u16string_view parameters" because they did not match the multi-overload pattern that was addressed there, but they nevertheless benefit from being changed just as well (witness e.g. the various resulting changes from copy() to subView()). This showed a conversion from OStringChar to std::string_view to be missing (while the corresponding conversion form OUStringChar to std::u16string_view was already present). The improvement to loplugin:stringadd became necessary to fix > [CPT] compilerplugins/clang/test/stringadd.cxx > error: 'error' diagnostics expected but not seen: > File ~/lo/core/compilerplugins/clang/test/stringadd.cxx Line 43 (directive at ~/lo/core/compilerplugins/clang/test/stringadd.cxx:42): simplify by merging with the preceding assignment [loplugin:stringadd] > File ~/lo/core/compilerplugins/clang/test/stringadd.cxx Line 61 (directive at ~/lo/core/compilerplugins/clang/test/stringadd.cxx:60): simplify by merging with the preceding assignment [loplugin:stringadd] > 2 errors generated. Change-Id: Ie40de0616a66e60e289c1af0ca60aed6f9ecc279 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/107602 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-11-13Make bridgetest exercise parameter passing in the C++/UNO bridge harderTor Lillqvist
The C++/UNO bridge for macOS on arm64 currently uses the Linux code. Apple's ABI uses slightly different parameter passing on the stack, though. See https://developer.apple.com/documentation/xcode/writing_arm64_code_for_apple_platforms?language=objc That has not been taken into account yet in the bridge code. The bridgetest, when run on macOS on arm64, didn't notice, sadly, but succeeded. With this change it crashes, as one would expect it to do. Add one more byte and short parameter to the setValues(), setValues2() and getValues() calls in the XBridgeTestBase interface. The stack allocation for those [in] parameters to setValues() differ between the Linux and Apple ABIs. Add corresponding attributes to the interface, and members to the SimpleTest struct. The changes to the source files in the cli subdirectory (C++/CLI, VB.NET, and C#) are done blindly as they aren't compiled even on Windows currently. Most likely the changes to them are incomplete and erroneous. Change-Id: I6f689a130d89b23cad9918829107d7da49a79c55 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/105770 Tested-by: Tor Lillqvist <tml@collabora.com> Reviewed-by: Tor Lillqvist <tml@collabora.com>
2020-11-12Cosmetic change to make it easier to see which parameter is the nthTor Lillqvist
Consequently put each parameter/argument on a separate line for the get/setValues methods. Will make it easier to add more parameters of such types and at such positions that they catch errors in the C++/UNO bridge on more platforms (specifically, the one for macOS on Apple Silicon). Change-Id: I68578d0401358317f3baf913ef4d53009c8f5f2f Reviewed-on: https://gerrit.libreoffice.org/c/core/+/105633 Tested-by: Jenkins Reviewed-by: Tor Lillqvist <tml@collabora.com>
2020-10-16fix some *printf which are using "%l" ie. long specifiersNoel
which are not portable between Linux and Windows because long is not portable. In preparation for converting long -> tools::Long Change-Id: I8bf1aa1570946ca887a6c83dd5f99c024d437336 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/104374 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-09-02Fix typo in codeAndrea Gelmini
It passed "make check" on Linux Change-Id: I58e196515614aad309c9df8784b08fa86415549d Reviewed-on: https://gerrit.libreoffice.org/c/core/+/101783 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2020-08-14loplugin:simplifybool moreNoel Grandin
look for expressions like !(a && !b) which can be expanded out Change-Id: I72515a9638762b050f9a258c08da39ebfa2ef8e7 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/100579 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-07-02Upcoming improved loplugin:staticanonymous -> redundantstatic: testtoolsStephan Bergmann
Change-Id: I14913564c7dbb453a761b5e37fec4f9eb331417d Reviewed-on: https://gerrit.libreoffice.org/c/core/+/97705 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-06-05Upcoming loplugin:elidestringvar: testtoolsStephan Bergmann
Change-Id: I097ecd5c781b35dc792f613a2f5be19919c3f1cc Reviewed-on: https://gerrit.libreoffice.org/c/core/+/95581 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-05-18use std::experimental::source_location in uno::ExceptionNoel Grandin
Clang and gcc have moved this out of experimental and into std::source_location, but only in their very latest releases. Change-Id: I9d9d9155788ee4240455ac4628b298dface4ad24 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/93868 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-05-10compact namespace in testtools..toolkitNoel Grandin
Change-Id: Iae1a7d3e2f14ee98ad486b4423208d2c29039346 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/93905 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-05-06Move all public Java classes to libreoffice.jarSamuel Mehrbrodt
This moves the classes from juh.jar and ridl.jar to libreoffice.jar The goal is to have one single jar (and Java module, will be added later) which developers can include to work with LO. juh.jar and ridl.jar are kept as basically empty jars with libreoffice.jar on its classpath to keep backwards compatibility. This is a continuation of ae855bf48163ff64d94cfc34aff8e37abdb5518d and a preparation to have Java 9 module support. Change-Id: Ifbbfb97f60373d14256e62ae3122913bd17d5bbb Reviewed-on: https://gerrit.libreoffice.org/c/core/+/91930 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-04-27Make upcasting css::uno::Reference ctor require complete typesStephan Bergmann
The main reason for the "home-grown" UpCast introduced with 904b3d1fceee5827076758ed2a81f80cb73493ca "Up-cast conversion constructor for css::uno::Reference" in 2013 was probably that we could not yet rely on C++11 std::is_base_of back then. A (welcome) side effect was that the derived class could be incomplete. However, specializations of UpCast relying on whether or not T2 is incomplete are obviously an ODR violation if the type is incomplete in some TUs and complete (and derived from T1) in others. And even if UpCast had internal linkage, it would still be brittle that its behavior depends on the completeness of T2 at the point of the template's instantiation, and not necessarily at the point of use. That means we should better base that ctor on std::is_base_of (which we can do now since 39a1edd6fec902ef378acce8af42c4d7fba280d0 "Make css::uno::Reference upcast ctor LIBO_INTERNAL_ONLY"), which causes a compilation error at least on Clang and GCC if the completeness requirements are not met. This change fixes all the cases where types need to be complete now, plus any resulting loplugin:referencecasting warnings ("the source reference is already a subtype of the destination reference"). Change-Id: Ieb9e3552e90adbf2c5a5af933dcb872e20661a2f Reviewed-on: https://gerrit.libreoffice.org/c/core/+/92950 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-04-19loplugin:buriedassign in variousNoel Grandin
Change-Id: Ib79cbc89f2f89ff48ea8b59bd12373a10b9dcd62 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/92495 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-04-07new loplugin:unusedvariableplusNoel Grandin
a particularly aggressive checker, which is why it is off by default Change-Id: Id5a0faa50b3ecc75e01f4aedc6579c5209e585da Reviewed-on: https://gerrit.libreoffice.org/c/core/+/91643 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-03-13Revert "loplugin:constfields in sw"Noel Grandin
This reverts commit 4969f4c0d3e2581aaa8a5b5a5769840fa6b6f8ea. Change-Id: I527e9366b05e8a20633720e334395b285991c524 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/90473 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-02-17Remove never-executed else-blockMuhammet Kara
And the always-tru if-check Change-Id: I674d65506e1791fadab7d2871010528fd5dd94d0 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/88816 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-02-16GBUILD_TRACE, support for finding out where the build time is spentLuboš Luňák
See instructions in solenv/gbuild/Trace.mk . This generates a file than can be viewed e.g. in the Chromium tracing view. Change-Id: I5f90647c58ca729375525b6daed2d4918adc8188 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/88754 Tested-by: Jenkins Reviewed-by: Luboš Luňák <l.lunak@collabora.com>
2020-02-04tdf#117331 Merge jurt and unoil into ridlSamuel Mehrbrodt
jurt.jar and unoil.jar are kept as effectively empty jars, each with a Class-Path: ridl.jar in their meta-inf/manifest.mf, so that 3rd-party code loading them (with or without also loading ridl.jar) will still have access to their content. Conceptually, the UNOIDL entities in unoil.jar (corresponding to module offapi) are not part of the URE, but are now made available by URE's ridl.jar. This should probably not cause problems in practice. At least for now, we seal exactly those packages in ridl.jar that were originally sealed in jurt.jar. Ideally, all of ridl.jar could be sealed now, but that would be mildly incompatible, as it would prevent 3rd-party code from introducing additional UNOIDL entities in the relevant namespaces (even if that is something we do not want 3rd-party code to do anyway). However, some JunitTest_jurt_* define classes in those sealed packages. In the past they got away with that by using gb_JunitTest_use_jar_classset,*,jurt. Instead they now need to gb_JunitTest_use_jar_classset,*,ridl and drop the gb_JunitTest_use_jar,*,ridl. But the former only makes available the classes that are specified in ridljar/Jar_ridl.mk with gb_Jar_add_sourcefiles, not the UNOIDL entities specified via gb_Jar_add_packagedirs. But the tests need the udkapi UNOIDL entities, so introduce gb_JunitTest_add_classpath to let the tests get them explicitly. (Curiously, JunitTest_jurt_uno and JnitTest_jurt_util use gb_JunitTest_use_jar_classset,*,jurt but don't seem to acutally need it; lets leave that for a follow-up clean up.) As a follow-up clean up, relevant files could be moved from jurt/ to ridljar/. Change-Id: I836f4e7bb47fb41f1306e3f223da90dba988eb9a Co-authored-by: Stephan Bergmann <sbergman@redhat.com> Reviewed-on: https://gerrit.libreoffice.org/c/core/+/84946 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2020-01-31clang-tidy modernize-concat-nested-namespaceNoel Grandin
Change-Id: Iab35a8b85b3ba1df791c774f40b037f9420a071a Reviewed-on: https://gerrit.libreoffice.org/c/core/+/86708 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2020-01-13tdf#88205 Adapt uses of css::uno::Sequence to use initializer_list ctorMesut Çifci
Change-Id: I1c1e7b42211c51f572698efd3135e388f8fb2979 Reviewed-on: https://gerrit.libreoffice.org/c/core/+/86648 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2019-12-23sal_Char->char in test..testtoolsNoel Grandin
Change-Id: I060d5fc9124dc46b57400d108a889e4c879b5e8c Reviewed-on: https://gerrit.libreoffice.org/85731 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2019-12-10Fix IdentationError and mixture of spaces and tabsJens Carl
Fix IdentationError and mixture of spaces and tabs found by python -m py_compile <file>. Change-Id: I1dc99196410d736ca33ead5deadfc61bc6584428 Reviewed-on: https://gerrit.libreoffice.org/83594 Tested-by: Jenkins Reviewed-by: Jens Carl <j.carl43@gmx.de>
2019-11-22Extend loplugin:external to warn about classesStephan Bergmann
...following up on 314f15bff08b76bf96acf99141776ef64d2f1355 "Extend loplugin:external to warn about enums". Cases where free functions were moved into an unnamed namespace along with a class, to not break ADL, are in: filter/source/svg/svgexport.cxx sc/source/filter/excel/xelink.cxx sc/source/filter/excel/xilink.cxx svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx All other free functions mentioning moved classes appear to be harmless and not give rise to (silent, even) ADL breakage. (One remaining TODO in compilerplugins/clang/external.cxx is that derived classes are not covered by computeAffectedTypes, even though they could also be affected by ADL-breakage--- but don't seem to be in any acutal case across the code base.) For friend declarations using elaborate type specifiers, like class C1 {}; class C2 { friend class C1; }; * If C2 (but not C1) is moved into an unnamed namespace, the friend declaration must be changed to not use an elaborate type specifier (i.e., "friend C1;"; see C++17 [namespace.memdef]/3: "If the name in a friend declaration is neither qualified nor a template-id and the declaration is a function or an elaborated-type-specifier, the lookup to determine whether the entity has been previously declared shall not consider any scopes outside the innermost enclosing namespace.") * If C1 (but not C2) is moved into an unnamed namespace, the friend declaration must be changed too, see <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71882> "elaborated-type-specifier friend not looked up in unnamed namespace". Apart from that, to keep changes simple and mostly mechanical (which should help avoid regressions), out-of-line definitions of class members have been left in the enclosing (named) namespace. But explicit specializations of class templates had to be moved into the unnamed namespace to appease <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92598> "explicit specialization of template from unnamed namespace using unqualified-id in enclosing namespace". Also, accompanying declarations (of e.g. typedefs or static variables) that could arguably be moved into the unnamed namespace too have been left alone. And in some cases, mention of affected types in blacklists in other loplugins needed to be adapted. And sc/qa/unit/mark_test.cxx uses a hack of including other .cxx, one of which is sc/source/core/data/segmenttree.cxx where e.g. ScFlatUInt16SegmentsImpl is not moved into an unnamed namespace (because it is declared in sc/inc/segmenttree.hxx), but its base ScFlatSegmentsImpl is. GCC warns about such combinations with enabled-by-default -Wsubobject-linkage, but "The compiler doesn’t give this warning for types defined in the main .C file, as those are unlikely to have multiple definitions." (<https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/Warning-Options.html>) The warned-about classes also don't have multiple definitions in the given test, so disable the warning when including the .cxx. Change-Id: Ib694094c0d8168be68f8fe90dfd0acbb66a3f1e4 Reviewed-on: https://gerrit.libreoffice.org/83239 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2019-08-20Fix typosAndrea Gelmini
Split from: https://gerrit.libreoffice.org/#/c/77765/ Change-Id: I888876fcad2405ba1a938a26b69b47737cf896b8 Reviewed-on: https://gerrit.libreoffice.org/77773 Reviewed-by: Julien Nabet <serval2412@yahoo.fr> Tested-by: Julien Nabet <serval2412@yahoo.fr>
2019-08-17tdf#88205 Adapt uses of css::uno::Sequence to use initializer_list ctorJulien Nabet
in testtools and toolkit Change-Id: I14b53c27906eb615e68482cbc3918be8da464212 Reviewed-on: https://gerrit.libreoffice.org/77624 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2019-08-12Fix typosAndrea Gelmini
Change-Id: Iedac37e0e056815e64294c70a233242df6dbf110 Reviewed-on: https://gerrit.libreoffice.org/77278 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2019-07-31Fix typosAndrea Gelmini
Change-Id: I3a877a8eb0babb9d04ac9750494576869481c8db Reviewed-on: https://gerrit.libreoffice.org/76763 Reviewed-by: Julien Nabet <serval2412@yahoo.fr> Tested-by: Julien Nabet <serval2412@yahoo.fr>
2019-07-31Improved loplugin:stringconstant (now that GCC 7 supports it): testtoolsStephan Bergmann
Change-Id: Ia053ced81d0c0546b1047c8bbee6caa4cfb32e41 Reviewed-on: https://gerrit.libreoffice.org/76637 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2019-07-30Fix typo in codeAndrea Gelmini
"connectr" Please look at: https://gerrit.libreoffice.org/#/c/76543/1 Change-Id: I3862780f92b8ce4583d642e3f653389a4ef3cc22 Reviewed-on: https://gerrit.libreoffice.org/76575 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2019-05-02Use hasElements to check Sequence emptiness in [t-u]*Arkadiy Illarionov
Similar to clang-tidy readability-container-size-empty Change-Id: Idefe55e37f5c837c889548ffe7c5711400012a4d Reviewed-on: https://gerrit.libreoffice.org/71667 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2019-03-05re-land "new loplugin typedefparam""Noel Grandin
This reverts commit c9bb48386bad7d2a40e6958883328145ae439cad, and adds a bunch more fixes. Change-Id: Ib584d302a73125528eba85fa1e722cb6fc41538a Reviewed-on: https://gerrit.libreoffice.org/68680 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2018-11-19Fix typosAndrea Gelmini
Change-Id: I6d51e4eb4a49a30193b904b2c7d62df1e16ea3d9 Reviewed-on: https://gerrit.libreoffice.org/63475 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2018-11-12Fix typosAndrea Gelmini
Change-Id: Ibb94b2b16afbcca84dd55ae51fde6fd27afede3a Reviewed-on: https://gerrit.libreoffice.org/63297 Tested-by: Jenkins Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
2018-11-02fix signatures of deleted copy/assign operatorsNoel Grandin
Change-Id: Id1a0749b78a7021be3564487fb974d7084705129 Reviewed-on: https://gerrit.libreoffice.org/62718 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2018-10-24Simplify containers iterations in test..toolsArkadiy Illarionov
Use range-based loop or replace with STL functions. Change-Id: If8fac9236a4696c8e56c0e81c60c429782581b96 Reviewed-on: https://gerrit.libreoffice.org/62262 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2018-10-22loplugin:staticvar in variousNoel Grandin
looks for variables that can be declared const and static i.e. they can be stored in the read-only linker segment and shared between different processes Change-Id: I8ddc6e5fa0f6b10d80c75d5952df8ddd311cf892 Reviewed-on: https://gerrit.libreoffice.org/61591 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
2018-10-09Extend loplugin:redundantinline to catch inline functions w/o external linkageStephan Bergmann
...where "inline" (in its meaning of "this function can be defined in multiple translation units") thus doesn't make much sense. (As discussed in compilerplugins/clang/redundantinline.cxx, exempt such "static inline" functions in include files for now.) All the rewriting has been done automatically by the plugin, except for one instance in sw/source/ui/frmdlg/column.cxx that used to involve an #if), plus some subsequent solenv/clang-format/reformat-formatted-files. Change-Id: Ib8b996b651aeafc03bbdc8890faa05ed50517224 Reviewed-on: https://gerrit.libreoffice.org/61573 Tested-by: Jenkins Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
2018-10-03loplugin:constfields in swNoel Grandin
Change-Id: I1eb6583bb9ec815bc0564b0d7c676f5b1fb9045f Reviewed-on: https://gerrit.libreoffice.org/61177 Tested-by: Jenkins Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
generated by cgit (git 2.34.1) at 2024-12-28 08:38:05 +0000