Age | Commit message (Collapse) | Author |
|
This reverts commit c3ed41752237a7a70c856dfb0d618f1c2eacea5a.
Jenkins fails in CppunitTest_sw_core_draw on Mac and Windows
Change-Id: I3e2b6359f3238a1b8af2e98d3cb5eee7aa864bae
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135859
Tested-by: Jenkins
Reviewed-by: Xisco Fauli <xiscofauli@libreoffice.org>
|
|
Locales needs to be read again
in the Preferences/Writing Aids section and since
this is a network operation it can cause a problem.
Better to list all the supported locales in the xcu
and load it right away.
Signed-off-by: Mert Tumer <mert.tumer@collabora.com>
Change-Id: Ifff624334627f7be259b677f9b416d6ddedfb2c7
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135598
Tested-by: Jenkins
|
|
depending on if it's called once, or twice on the input string.
The first converts from Full-Width Characters to equivalent lower ASCII
range with non letters retained. And then the second iteration would
convert to lower case ASCII with non letters filtered out. Presumably
the intention is the Full-Width case should get directly to the same
results as multiple calls.
Change-Id: Idba4ebe04c907c160ee53abf6d5551550da032dd
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135678
Tested-by: Jenkins
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
|
|
Change-Id: I77778ecd075712c41bd29324be090ab4a8351ab9
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135677
Tested-by: Caolán McNamara <caolanm@redhat.com>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
|
|
regression from
commit 07021596acb3d104ba129d371b1ae0b79f67a6a4 (HEAD)
Date: Sat Jun 12 18:57:51 2021 +0200
tdf#142242 Forename imported with trailing space
Change-Id: I792fbe5955de464f41ac61c85f1ca651121b4a99
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135372
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
...after 6fc3dfd3f1b5cb13101299df42444f2ff0493846 "use more string_view"
Change-Id: I0f4fb75e90d18ed3331f0c857dce1cfcb7482d65
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135335
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: Icceaf255a3a71d612b17dad41d04b1906550a7a0
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135133
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: Ifa67ab7198f5d3b06171869f57703acdaa959f7d
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/135128
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
so we avoid repeated allocation
Change-Id: I9541c52e73878cf515c9159477bd3d2fda9e0078
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134803
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
similarly to ByteReader
move both of them down to comphelper, since we want to use it from
comphelper, and comphelper is "below" unotools in the module dependency
graph
Change-Id: Ic98fa2268e125fd8e4378fb899ad5f97de721713
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134645
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
which lets us skip the inefficiency of needing an extra buffer when
reading via XInputStream
Change-Id: Ic5334b7d11ea6a57bc1800f508fc69611a053af1
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134348
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I805203dc51ca85515150fe0f28fc6464c45453c2
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134523
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: Iadd73477bf3b0edaa0fb7db10f9ffca88fe737e7
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134476
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
since it doesn't change
Change-Id: I8a9eee18b6de5f375ee2d4d67cdf48700590d007
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134347
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
and fix SvtLinguConfigItem::GetOptions so that it only
accesses state while holding the lock.
Change-Id: Ie092bf427e130348131412a038bce7de8ebcde83
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134327
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I96d1194253207642e7abe83b0b18c82eb3782824
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134316
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
rather than allocating them repeatedly
Change-Id: Ie0f751f589b512a97534d193e1401312ae2f2afe
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134310
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Since commit ac511d90cdf9d28eb8809c30be9fa08b42ea0bd3
Author Noel Grandin <noelgrandin@gmail.com>
Date Thu Dec 23 19:42:19 2021 +0200
osl::Mutex->std::mutex in SvtUserOptions
non-recursive std::mutex is used. However, it looks like recursive
locking is possible here, as shows the debugging that I made
during the work on https://gerrit.libreoffice.org/c/core/+/134251.
The call stack looks like this:
utllo.dll!SvtUserOptions::GetToken(UserOptToken nToken) Line 318
utllo.dll!SvtUserOptions::GetLastName() Line 294
sclo.dll!ScChangeTrack::ConfigurationChanged(utl::ConfigurationBroadcaster * __formal, ConfigurationHints __formal) Line 2166
utllo.dll!utl::ConfigurationBroadcaster::NotifyListeners(ConfigurationHints nHint) Line 85
utllo.dll!utl::detail::Options::ConfigurationChanged(utl::ConfigurationBroadcaster * __formal, ConfigurationHints nHint) Line 112
utllo.dll!utl::ConfigurationBroadcaster::NotifyListeners(ConfigurationHints nHint) Line 85
utllo.dll!SvtUserOptions::Impl::Notify() Line 251
utllo.dll!SvtUserOptions::ChangeListener::changesOccurred(const com::sun::star::util::ChangesEvent & rEvent) Line 116
configmgrlo.dll!configmgr::Broadcaster::send() Line 168
configmgrlo.dll!configmgr::Access::setPropertyValue(const rtl::OUString & aPropertyName, const com::sun::star::uno::Any & aValue) Line 714
utllo.dll!SvtUserOptions::Impl::SetValue_Impl<rtl::OUString>(UserOptToken nToken, const rtl::OUString & sToken) Line 183
utllo.dll!SvtUserOptions::Impl::SetToken(UserOptToken nToken, const rtl::OUString & sToken) Line 200
utllo.dll!SvtUserOptions::SetToken(UserOptToken nToken, const rtl::OUString & rNewToken) Line 325
test_sc_subsequent_export_test.dll!ScExportTest::testTrackChangesSimpleXLSX() Line 3072
...
So getting the token may happen during notification of the listeners
after setting the token, in the same thread. So let's use recursive
mutex.
Change-Id: I9be82f307a9948bcbc76d7d90632a0307c5dc4f6
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134190
Tested-by: Mike Kaganski <mike.kaganski@collabora.com>
Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
|
|
Change-Id: I722c4ca5d1bb6c0de6b1eff7478de03a23e9d89b
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134199
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: Id54f9f15547010c9df640e406d36fb09febac4cd
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/134089
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
found by inspecting call sites of OUString::getToken
Change-Id: I4269c7476c7aa46fac39528227e350568f0eb34a
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132644
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Signed-off-by: Aurimas Fišeras <aurimas@members.fsf.org>
Change-Id: Iee5c7aec7817bc7af5f45d192165fe30301788d0
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133823
Reviewed-by: Adolfo Jayme Barrientos <fitojb@ubuntu.com>
Tested-by: Adolfo Jayme Barrientos <fitojb@ubuntu.com>
|
|
Change-Id: Id10d68f2eb016671be6842dfaa82909207b0708d
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133754
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I58d2020035396da0b3580b058d87c8e2d3f2df40
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133750
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...to harmonize it with the HAVE_LIBCPP configuration variable recently
introduced in 6014f363a08f2edd6086cf30b3bbb913f1c621c6 "improve support for
using libc++ on Linux and for libc++ debug mode"
Change-Id: I6b3fee2e4e564d75caf1e60095d0b554153bce9e
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133745
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I042b8dcadbf7581de325c161763fe35aecde5ca2
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133694
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I4462f7cf4740fa4d1b129d76a0775f4250f41bbd
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133555
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I114bec72cb933238675e539a8388a607226827cd
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133455
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
...where a signed and an unsigned value are compared, and the signed value has
just been proven to be non-negative here
Change-Id: I9665e6c2c4c5557f2d4cf1bb646f9fffc7bd7d30
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133442
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I134a8cddba169fe9bcc04687ad15c2cfeaccfb0f
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133440
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Add Office::Histories::HistoryItem::ReadOnly flag to configuration so
that a document that was opened read-only isn't opened as editable from
recent documents.
Change-Id: I6985da287d3337a53a7e41e8e500421038eedb91
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133385
Tested-by: Jenkins
Reviewed-by: Michael Stahl <michael.stahl@allotropia.de>
|
|
Change-Id: If32767647d3fba22a8e4a2b10fc57f47efca01d2
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133270
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I5fc3753475c3c6a45f86910eeb49055f96a2e925
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/133013
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
for which we have o3tl:: equivalents
Change-Id: I4670fd8b703ac47214be213f41e88d1c6ede7032
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132913
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
See tdf#42949 for motivation
Change-Id: If710445176681de8e0a0b6c65f58ecaca19dbccf
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132768
Tested-by: Jenkins
Reviewed-by: Miklos Vajna <vmiklos@collabora.com>
|
|
found by tweaking the loplugin:stringview and making it whitelist
getLength
Change-Id: Ic41cd4e3026d93b70a76fe1279c6de3abbe6b4a0
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132820
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
since we now have o3tl versions of those that work on
string_view.
Also improve those o3tl functions to support both string_view
and u16string_view
Change-Id: Iacab2996becec62aa78a5597c52d983bb784749a
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132755
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
so we can use it in places where we cannot include comphelper
Change-Id: Iba0ba3e4c0dcf0f9d1f09092a77c3b2010ec4f6d
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132732
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Add a (non-gui) setting GeneratorOverride that, if set, is used
for odt/docx/pdf generator string identifying the application that
has written it instead of the normal productname etc. string.
Change-Id: Ibe12a063e7e6b5a09c69cdf66cba073793650d62
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132495
Tested-by: Jenkins
Reviewed-by: Luboš Luňák <l.lunak@collabora.com>
|
|
Change-Id: I54e3ddf79ba793fd4328bf8bda7f949b65349651
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132693
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
.. and lastIndexOf, which convert to find and rfind
Change-Id: I6c4156cf904774c0d867f85a4c2785dba7593f62
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132445
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I86592be0717c062a918108bf4437074b0f70b372
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/132029
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
speeds up saving XLSX by 10%
Change-Id: I5f48fcd3de44675d27e275c6ff2f4e51a067c750
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/131727
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
revert part of
commit dd42f133f604ee2f7e0ffbca6a8d94fb8f95dfe5
Author: Noel Grandin <noelgrandin@gmail.com>
Date: Mon Jan 10 19:37:05 2022 +0200
tdf#146375 Cannot rename user-defined categories in template manager
specifically, revert the
> Simplify the UCB usage to just write the contents of the tempfile
and also call SvStream::Flush() in utl::TempFile::GetURL(), so that
the data actually hits the disk, so that when UCB attempts to read
the data using a separate file handle, it sees the data.
(Otherwise the temporary file data only exists in the operating system
buffers, and can only be read by the same file handle that created it)
Change-Id: I17798c53e49d65484605f2dcd96b45babd70054d
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/130499
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
...as seen during e.g. UITest_calc_tests9 now,
> unotools/source/i18n/localedatawrapper.cxx:1017:17: runtime error: signed integer overflow: -9223372036854775808 * -1 cannot be represented in type 'long'
> #0 in LocaleDataWrapper::ImplAddFormatNum(rtl::OUStringBuffer&, long, unsigned short, bool, bool) const at unotools/source/i18n/localedatawrapper.cxx:1017:17
> #1 in LocaleDataWrapper::getNum(long, unsigned short, bool, bool) const at unotools/source/i18n/localedatawrapper.cxx:1217:5
> #2 in weld::MetricSpinButton::format_number(long) const at vcl/source/window/builder.cxx:306:32
> #3 in weld::MetricSpinButton::update_width_chars() at vcl/source/window/builder.cxx:259:61
> #4 in weld::MetricSpinButton::set_range(long, long, FieldUnit) at include/vcl/weld.hxx:1991:9
> #5 in weld::MetricSpinButton::set_min(long, FieldUnit) at include/vcl/weld.hxx:2005:9
Change-Id: I940e2f1e2e4d42db84d4bb0e7b68086204dc77ac
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/129570
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
... resulting in a stripped-down, Writer-only build to decrease
the resulting WASM bytecode size.
It removes the following code from the build:
* All other major modules: Base, Calc, Chart, Draw, Impress and
Math and related writerperfect filters
* The premultiply tables
* The (auto-)recovery functionality
* All accessibility (but not the accessibility document checker)
* The LanguageGuess component
* EPUB support
* The start center / BackingWindow
* The TipOfTheDay functionality
* The splash screen communication
Currently crashs with anything different then soffice --writer.
Closing the document also still crashes.
FYI: many of these features are now behind ENABLE_WASM_STRIP_*
defines, but they normally don't work on their own, globally!
That's because we started with stripping the main components.
Change-Id: Ib9c0f9452815910c0a2aceaf142ba1ad4a9cb0d7
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/126182
Tested-by: Jenkins
Reviewed-by: Jan-Marek Glogowski <glogow@fbihome.de>
|
|
Regression from
commit 3624a703361b108d22448bd60a97733f05e37820
tdf#135316 remove OTempFileService pessimisation
So fix two things here
(1) make it so the tempfile service flushes the SvStream buffer
and resets the file position, so we can read the data
after writing it.
(2) Simplify the UCB usage to just write the contents of the tempfile
via the tempfile InputStream, which is simpler and safer
Change-Id: I15ed3b02c2d6415d10a9579f66374e6268188d5c
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/128195
Tested-by: Noel Grandin <noel.grandin@collabora.co.uk>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Flush() turns into a sync() on the device, which is pretty slow.
Most of the time all we actually want to do is to flush the internal
buffers from the SvStream.
So expose the FlushBuffer method and use that where possible.
And also means we don't need the mbDontFlushOnClose flag on SvStream
any more.
Change-Id: Ibe089b88b325f0fdc565200a97ce72cd26b7fcfb
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/128214
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: Ibf0aef2116e6ee7ab1cdc0de2b2bb502a8ce05e1
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/127417
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: If841031faf5b214a1978422b93b59cfa32fcd299
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/127400
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|