/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include namespace basegfx { bool ODFGradientInfo::operator==(const ODFGradientInfo& rODFGradientInfo) const { return getTextureTransform() == rODFGradientInfo.getTextureTransform() && getAspectRatio() == rODFGradientInfo.getAspectRatio() && getRequestedSteps() == rODFGradientInfo.getRequestedSteps(); } const B2DHomMatrix& ODFGradientInfo::getBackTextureTransform() const { if(maBackTextureTransform.isIdentity()) { const_cast< ODFGradientInfo* >(this)->maBackTextureTransform = getTextureTransform(); const_cast< ODFGradientInfo* >(this)->maBackTextureTransform.invert(); } return maBackTextureTransform; } /** Most of the setup for linear & axial gradient is the same, except for the border treatment. Factored out here. */ static ODFGradientInfo init1DGradientInfo( const B2DRange& rTargetRange, sal_uInt32 nSteps, double fBorder, double fAngle, bool bAxial) { B2DHomMatrix aTextureTransform; fAngle = -fAngle; double fTargetSizeX(rTargetRange.getWidth()); double fTargetSizeY(rTargetRange.getHeight()); double fTargetOffsetX(rTargetRange.getMinX()); double fTargetOffsetY(rTargetRange.getMinY()); // add object expansion const bool bAngleUsed(!fTools::equalZero(fAngle)); if(bAngleUsed) { const double fAbsCos(fabs(cos(fAngle))); const double fAbsSin(fabs(sin(fAngle))); const double fNewX(fTargetSizeX * fAbsCos + fTargetSizeY * fAbsSin); const double fNewY(fTargetSizeY * fAbsCos + fTargetSizeX * fAbsSin); fTargetOffsetX -= (fNewX - fTargetSizeX) / 2.0; fTargetOffsetY -= (fNewY - fTargetSizeY) / 2.0; fTargetSizeX = fNewX; fTargetSizeY = fNewY; } const double fSizeWithoutBorder(1.0 - fBorder); if(bAxial) { aTextureTransform.scale(1.0, fSizeWithoutBorder * 0.5); aTextureTransform.translate(0.0, 0.5); } else { if(!fTools::equal(fSizeWithoutBorder, 1.0)) { aTextureTransform.scale(1.0, fSizeWithoutBorder); aTextureTransform.translate(0.0, fBorder); } } aTextureTransform.scale(fTargetSizeX, fTargetSizeY); // add texture rotate after scale to keep perpendicular angles if(bAngleUsed) { const B2DPoint aCenter(0.5 * fTargetSizeX, 0.5 * fTargetSizeY); aTextureTransform *= basegfx::utils::createRotateAroundPoint(aCenter, fAngle); } // add object translate aTextureTransform.translate(fTargetOffsetX, fTargetOffsetY); // prepare aspect for texture const double fAspectRatio(fTools::equalZero(fTargetSizeY) ? 1.0 : fTargetSizeX / fTargetSizeY); return ODFGradientInfo(aTextureTransform, fAspectRatio, nSteps); } /** Most of the setup for radial & ellipsoidal gradient is the same, except for the border treatment. Factored out here. */ static ODFGradientInfo initEllipticalGradientInfo( const B2DRange& rTargetRange, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder, double fAngle, bool bCircular) { B2DHomMatrix aTextureTransform; fAngle = -fAngle; double fTargetSizeX(rTargetRange.getWidth()); double fTargetSizeY(rTargetRange.getHeight()); double fTargetOffsetX(rTargetRange.getMinX()); double fTargetOffsetY(rTargetRange.getMinY()); // add object expansion if(bCircular) { const double fOriginalDiag(std::hypot(fTargetSizeX, fTargetSizeY)); fTargetOffsetX -= (fOriginalDiag - fTargetSizeX) / 2.0; fTargetOffsetY -= (fOriginalDiag - fTargetSizeY) / 2.0; fTargetSizeX = fOriginalDiag; fTargetSizeY = fOriginalDiag; } else { fTargetOffsetX -= ((M_SQRT2 - 1) / 2.0 ) * fTargetSizeX; fTargetOffsetY -= ((M_SQRT2 - 1) / 2.0 ) * fTargetSizeY; fTargetSizeX = M_SQRT2 * fTargetSizeX; fTargetSizeY = M_SQRT2 * fTargetSizeY; } const double fHalfBorder((1.0 - fBorder) * 0.5); aTextureTransform.scale(fHalfBorder, fHalfBorder); aTextureTransform.translate(0.5, 0.5); aTextureTransform.scale(fTargetSizeX, fTargetSizeY); // add texture rotate after scale to keep perpendicular angles if(!bCircular && !fTools::equalZero(fAngle)) { const B2DPoint aCenter(0.5 * fTargetSizeX, 0.5 * fTargetSizeY); aTextureTransform *= basegfx::utils::createRotateAroundPoint(aCenter, fAngle); } // add defined offsets after rotation if(!fTools::equal(0.5, rOffset.getX()) || !fTools::equal(0.5, rOffset.getY())) { // use original target size fTargetOffsetX += (rOffset.getX() - 0.5) * rTargetRange.getWidth(); fTargetOffsetY += (rOffset.getY() - 0.5) * rTargetRange.getHeight(); } // add object translate aTextureTransform.translate(fTargetOffsetX, fTargetOffsetY); // prepare aspect for texture const double fAspectRatio(fTargetSizeY == 0.0 ? 1.0 : (fTargetSizeX / fTargetSizeY)); return ODFGradientInfo(aTextureTransform, fAspectRatio, nSteps); } /** Setup for rect & square gradient is exactly the same. Factored out here. */ static ODFGradientInfo initRectGradientInfo( const B2DRange& rTargetRange, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder, double fAngle, bool bSquare) { B2DHomMatrix aTextureTransform; fAngle = -fAngle; double fTargetSizeX(rTargetRange.getWidth()); double fTargetSizeY(rTargetRange.getHeight()); double fTargetOffsetX(rTargetRange.getMinX()); double fTargetOffsetY(rTargetRange.getMinY()); // add object expansion if(bSquare) { const double fSquareWidth(std::max(fTargetSizeX, fTargetSizeY)); fTargetOffsetX -= (fSquareWidth - fTargetSizeX) / 2.0; fTargetOffsetY -= (fSquareWidth - fTargetSizeY) / 2.0; fTargetSizeX = fTargetSizeY = fSquareWidth; } // add object expansion const bool bAngleUsed(!fTools::equalZero(fAngle)); if(bAngleUsed) { const double fAbsCos(fabs(cos(fAngle))); const double fAbsSin(fabs(sin(fAngle))); const double fNewX(fTargetSizeX * fAbsCos + fTargetSizeY * fAbsSin); const double fNewY(fTargetSizeY * fAbsCos + fTargetSizeX * fAbsSin); fTargetOffsetX -= (fNewX - fTargetSizeX) / 2.0; fTargetOffsetY -= (fNewY - fTargetSizeY) / 2.0; fTargetSizeX = fNewX; fTargetSizeY = fNewY; } const double fHalfBorder((1.0 - fBorder) * 0.5); aTextureTransform.scale(fHalfBorder, fHalfBorder); aTextureTransform.translate(0.5, 0.5); aTextureTransform.scale(fTargetSizeX, fTargetSizeY); // add texture rotate after scale to keep perpendicular angles if(bAngleUsed) { const B2DPoint aCenter(0.5 * fTargetSizeX, 0.5 * fTargetSizeY); aTextureTransform *= basegfx::utils::createRotateAroundPoint(aCenter, fAngle); } // add defined offsets after rotation if(!fTools::equal(0.5, rOffset.getX()) || !fTools::equal(0.5, rOffset.getY())) { // use original target size fTargetOffsetX += (rOffset.getX() - 0.5) * rTargetRange.getWidth(); fTargetOffsetY += (rOffset.getY() - 0.5) * rTargetRange.getHeight(); } // add object translate aTextureTransform.translate(fTargetOffsetX, fTargetOffsetY); // prepare aspect for texture const double fAspectRatio(fTargetSizeY == 0.0 ? 1.0 : (fTargetSizeX / fTargetSizeY)); return ODFGradientInfo(aTextureTransform, fAspectRatio, nSteps); } namespace utils { /* Tooling method to extract data from given BGradient to ColorStops, doing some corrections, partially based on given SingleColor */ void prepareColorStops( const basegfx::BGradient& rGradient, BColorStops& rColorStops, BColor& rSingleColor) { if (rGradient.GetColorStops().isSingleColor(rSingleColor)) { // when single color, preserve value in rSingleColor // and clear the ColorStops, done. rColorStops.clear(); return; } const bool bAdaptStartEndIntensity(100 != rGradient.GetStartIntens() || 100 != rGradient.GetEndIntens()); const bool bAdaptBorder(0 != rGradient.GetBorder()); if (!bAdaptStartEndIntensity && !bAdaptBorder) { // copy unchanged ColorStops & done rColorStops = rGradient.GetColorStops(); return; } // prepare a copy to work on basegfx::BGradient aWorkCopy(rGradient); if (bAdaptStartEndIntensity) { aWorkCopy.tryToApplyStartEndIntensity(); // this can again lead to single color (e.g. both zero, so // all black), so check again for it if (aWorkCopy.GetColorStops().isSingleColor(rSingleColor)) { rColorStops.clear(); return; } } if (bAdaptBorder) { aWorkCopy.tryToApplyBorder(); } // extract ColorStops, that's all we need here rColorStops = aWorkCopy.GetColorStops(); } /* Tooling method to synchronize the given ColorStops. The intention is that a color GradientStops and an alpha/transparence GradientStops gets synchronized for export. */ void synchronizeColorStops( BColorStops& rColorStops, BColorStops& rAlphaStops, const BColor& rSingleColor, const BColor& rSingleAlpha) { if (rColorStops.empty()) { if (rAlphaStops.empty()) { // no AlphaStops and no ColorStops // create two-stop fallbacks for both rColorStops = BColorStops { BColorStop(0.0, rSingleColor), BColorStop(1.0, rSingleColor) }; rAlphaStops = BColorStops { BColorStop(0.0, rSingleAlpha), BColorStop(1.0, rSingleAlpha) }; } else { // AlphaStops but no ColorStops // create fallback synched with existing AlphaStops for (const auto& cand : rAlphaStops) { rColorStops.emplace_back(cand.getStopOffset(), rSingleColor); } } // preparations complete, we are done return; } else if (rAlphaStops.empty()) { // ColorStops but no AlphaStops // create fallback AlphaStops synched with existing ColorStops using SingleAlpha for (const auto& cand : rColorStops) { rAlphaStops.emplace_back(cand.getStopOffset(), rSingleAlpha); } // preparations complete, we are done return; } // here we have ColorStops and AlphaStops not empty. Check if we need to // synchronize both or if they are already usable/in a synched state so // that they have same count and same StopOffsets bool bNeedToSyncronize(rColorStops.size() != rAlphaStops.size()); if (!bNeedToSyncronize) { // check for same StopOffsets BColorStops::const_iterator aCurrColor(rColorStops.begin()); BColorStops::const_iterator aCurrAlpha(rAlphaStops.begin()); while (!bNeedToSyncronize && aCurrColor != rColorStops.end() && aCurrAlpha != rAlphaStops.end()) { if (fTools::equal(aCurrColor->getStopOffset(), aCurrAlpha->getStopOffset())) { aCurrColor++; aCurrAlpha++; } else { bNeedToSyncronize = true; } } } if (bNeedToSyncronize) { // synchronize sizes & StopOffsets BColorStops::const_iterator aCurrColor(rColorStops.begin()); BColorStops::const_iterator aCurrAlpha(rAlphaStops.begin()); BColorStops aNewColor; BColorStops aNewAlpha; BColorStops::BColorStopRange aColorStopRange; BColorStops::BColorStopRange aAlphaStopRange; bool bRealChange(false); do { const bool bColor(aCurrColor != rColorStops.end()); const bool bAlpha(aCurrAlpha != rAlphaStops.end()); if (bColor && bAlpha) { const double fColorOff(aCurrColor->getStopOffset()); const double fAlphaOff(aCurrAlpha->getStopOffset()); if (fTools::less(fColorOff, fAlphaOff)) { // copy color, create alpha aNewColor.emplace_back(fColorOff, aCurrColor->getStopColor()); aNewAlpha.emplace_back(fColorOff, rAlphaStops.getInterpolatedBColor(fColorOff, 0, aAlphaStopRange)); bRealChange = true; aCurrColor++; } else if (fTools::more(fColorOff, fAlphaOff)) { // copy alpha, create color aNewColor.emplace_back(fAlphaOff, rColorStops.getInterpolatedBColor(fAlphaOff, 0, aColorStopRange)); aNewAlpha.emplace_back(fAlphaOff, aCurrAlpha->getStopColor()); bRealChange = true; aCurrAlpha++; } else { // equal: copy both, advance aNewColor.emplace_back(fColorOff, aCurrColor->getStopColor()); aNewAlpha.emplace_back(fAlphaOff, aCurrAlpha->getStopColor()); aCurrColor++; aCurrAlpha++; } } else if (bColor) { const double fColorOff(aCurrColor->getStopOffset()); aNewAlpha.emplace_back(fColorOff, rAlphaStops.getInterpolatedBColor(fColorOff, 0, aAlphaStopRange)); aNewColor.emplace_back(fColorOff, aCurrColor->getStopColor()); bRealChange = true; aCurrColor++; } else if (bAlpha) { const double fAlphaOff(aCurrAlpha->getStopOffset()); aNewColor.emplace_back(fAlphaOff, rColorStops.getInterpolatedBColor(fAlphaOff, 0, aColorStopRange)); aNewAlpha.emplace_back(fAlphaOff, aCurrAlpha->getStopColor()); bRealChange = true; aCurrAlpha++; } else { // no more input, break do..while loop break; } } while(true); if (bRealChange) { // copy on 'real' change, that means data was added. // This should always be the cease and should have been // detected as such above, see bNeedToSyncronize rColorStops = std::move(aNewColor); rAlphaStops = std::move(aNewAlpha); // MCGR: tdf#155537 used wrong result here } } } sal_uInt32 calculateNumberOfSteps( sal_uInt32 nRequestedSteps, const BColor& rStart, const BColor& rEnd) { const sal_uInt32 nMaxSteps(sal_uInt32((rStart.getMaximumDistance(rEnd) * 127.5) + 0.5)); if (0 == nRequestedSteps) { nRequestedSteps = nMaxSteps; } if(nRequestedSteps > nMaxSteps) { nRequestedSteps = nMaxSteps; } return std::max(sal_uInt32(1), nRequestedSteps); } ODFGradientInfo createLinearODFGradientInfo( const B2DRange& rTargetArea, sal_uInt32 nSteps, double fBorder, double fAngle) { return init1DGradientInfo( rTargetArea, nSteps, fBorder, fAngle, false); } ODFGradientInfo createAxialODFGradientInfo( const B2DRange& rTargetArea, sal_uInt32 nSteps, double fBorder, double fAngle) { return init1DGradientInfo( rTargetArea, nSteps, fBorder, fAngle, true); } ODFGradientInfo createRadialODFGradientInfo( const B2DRange& rTargetArea, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder) { return initEllipticalGradientInfo( rTargetArea, rOffset, nSteps, fBorder, 0.0, true); } ODFGradientInfo createEllipticalODFGradientInfo( const B2DRange& rTargetArea, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder, double fAngle) { return initEllipticalGradientInfo( rTargetArea, rOffset, nSteps, fBorder, fAngle, false); } ODFGradientInfo createSquareODFGradientInfo( const B2DRange& rTargetArea, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder, double fAngle) { return initRectGradientInfo( rTargetArea, rOffset, nSteps, fBorder, fAngle, true); } ODFGradientInfo createRectangularODFGradientInfo( const B2DRange& rTargetArea, const B2DVector& rOffset, sal_uInt32 nSteps, double fBorder, double fAngle) { return initRectGradientInfo( rTargetArea, rOffset, nSteps, fBorder, fAngle, false); } double getLinearGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); // Ignore X, this is not needed at all for Y-Oriented gradients // if(aCoor.getX() < 0.0 || aCoor.getX() > 1.0) // { // return 0.0; // } if(aCoor.getY() <= 0.0) { return 0.0; // start value for inside } if(aCoor.getY() >= 1.0) { return 1.0; // end value for outside } return aCoor.getY(); } double getAxialGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); // Ignore X, this is not needed at all for Y-Oriented gradients //if(aCoor.getX() < 0.0 || aCoor.getX() > 1.0) //{ // return 0.0; //} const double fAbsY(fabs(aCoor.getY())); if(fAbsY >= 1.0) { return 1.0; // use end value when outside in Y } return fAbsY; } double getRadialGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); if(aCoor.getX() < -1.0 || aCoor.getX() > 1.0 || aCoor.getY() < -1.0 || aCoor.getY() > 1.0) { return 0.0; } return 1.0 - std::hypot(aCoor.getX(), aCoor.getY()); } double getEllipticalGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); if(aCoor.getX() < -1.0 || aCoor.getX() > 1.0 || aCoor.getY() < -1.0 || aCoor.getY() > 1.0) { return 0.0; } double fAspectRatio(rGradInfo.getAspectRatio()); double t(1.0); // MCGR: Similar to getRectangularGradientAlpha (please // see there) we need to use aspect ratio here. Due to // initEllipticalGradientInfo using M_SQRT2 to make this // gradient look 'nicer' this correction seems not 100% // correct, but is close enough for now if(fAspectRatio > 1.0) { t = 1.0 - std::hypot(aCoor.getX() / fAspectRatio, aCoor.getY()); } else if(fAspectRatio > 0.0) { t = 1.0 - std::hypot(aCoor.getX(), aCoor.getY() * fAspectRatio); } return t; } double getSquareGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); const double fAbsX(fabs(aCoor.getX())); if(fAbsX >= 1.0) { return 0.0; } const double fAbsY(fabs(aCoor.getY())); if(fAbsY >= 1.0) { return 0.0; } return 1.0 - std::max(fAbsX, fAbsY); } double getRectangularGradientAlpha(const B2DPoint& rUV, const ODFGradientInfo& rGradInfo) { const B2DPoint aCoor(rGradInfo.getBackTextureTransform() * rUV); double fAbsX(fabs(aCoor.getX())); if(fAbsX >= 1.0) { return 0.0; } double fAbsY(fabs(aCoor.getY())); if(fAbsY >= 1.0) { return 0.0; } // MCGR: Visualizations using the texturing method for // displaying gradients (getBackTextureTransform is // involved) show wrong results for GradientElliptical // and GradientRect, this can be best seen when using // less steps, e.g. just four. This thus has influence // on cppcanvas (slideshow) and 3D textures, so needs // to be corrected. // Missing is to use the aspect ratio of the object // in this [-1, -1, 1, 1] unified coordinate space // after getBackTextureTransform is applied. Optically // in the larger direction of the texturing the color // step distances are too big *because* we are in that // unit range now. // To correct that, a kind of 'limo stretching' needs to // be applied, adding space around the center // proportional to the aspect ratio, so the intuitive // idea would be to do // // fAbsX' = ((fAspectRatio - 1) + fAbsX) / fAspectRatio // // which scales from the center. This does not work, and // after some thoughts it's clear why: It's not the // position that needs to be moved (this cannot be // changed), but the position *before* that scale has // to be determined to get the correct, shifted color // for the already 'new' position. Thus, turn around // the expression as // // fAbsX' * fAspectRatio = fAspectRatio - 1 + fAbsX // fAbsX' * fAspectRatio - fAspectRatio + 1 = fAbsX // fAbsX = (fAbsX' - 1) * fAspectRatio + 1 // // This works and can even be simply adapted for // fAspectRatio < 1.0 aka vertical is bigger. double fAspectRatio(rGradInfo.getAspectRatio()); if(fAspectRatio > 1.0) { fAbsX = ((fAbsX - 1) * fAspectRatio) + 1; } else if(fAspectRatio > 0.0) { fAbsY = ((fAbsY - 1) / fAspectRatio) + 1; } return 1.0 - std::max(fAbsX, fAbsY); } } // namespace utils } // namespace basegfx /* vim:set shiftwidth=4 softtabstop=4 expandtab: */