/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "comenumwrapper.hxx" #include "ddectrl.hxx" #include "dllmgr.hxx" #include #include #include #include #include #include #include #include #include #include #include using com::sun::star::uno::Reference; using namespace com::sun::star::uno; using namespace com::sun::star::container; using namespace com::sun::star::lang; using namespace com::sun::star::beans; using namespace com::sun::star::script; using namespace ::com::sun::star; static void lcl_clearImpl( SbxVariableRef const & refVar, SbxDataType const & eType ); static void lcl_eraseImpl( SbxVariableRef const & refVar, bool bVBAEnabled ); bool SbiRuntime::isVBAEnabled() { bool bResult = false; SbiInstance* pInst = GetSbData()->pInst; if ( pInst && GetSbData()->pInst->pRun ) bResult = pInst->pRun->bVBAEnabled; return bResult; } void StarBASIC::SetVBAEnabled( bool bEnabled ) { if ( bDocBasic ) { bVBAEnabled = bEnabled; } } bool StarBASIC::isVBAEnabled() const { if ( bDocBasic ) { if( SbiRuntime::isVBAEnabled() ) return true; return bVBAEnabled; } return false; } struct SbiArgv { // Argv stack: SbxArrayRef refArgv; // Argv short nArgc; // Argc SbiArgv(SbxArrayRef const & refArgv_, short nArgc_) : refArgv(refArgv_), nArgc(nArgc_) {} }; struct SbiGosub { // GOSUB-Stack: const sal_uInt8* pCode; // Return-Pointer sal_uInt16 nStartForLvl; // #118235: For Level in moment of gosub SbiGosub(const sal_uInt8* pCode_, sal_uInt16 nStartForLvl_) : pCode(pCode_), nStartForLvl(nStartForLvl_) {} }; SbiRuntime::pStep0 SbiRuntime::aStep0[] = { // all opcodes without operands &SbiRuntime::StepNOP, &SbiRuntime::StepEXP, &SbiRuntime::StepMUL, &SbiRuntime::StepDIV, &SbiRuntime::StepMOD, &SbiRuntime::StepPLUS, &SbiRuntime::StepMINUS, &SbiRuntime::StepNEG, &SbiRuntime::StepEQ, &SbiRuntime::StepNE, &SbiRuntime::StepLT, &SbiRuntime::StepGT, &SbiRuntime::StepLE, &SbiRuntime::StepGE, &SbiRuntime::StepIDIV, &SbiRuntime::StepAND, &SbiRuntime::StepOR, &SbiRuntime::StepXOR, &SbiRuntime::StepEQV, &SbiRuntime::StepIMP, &SbiRuntime::StepNOT, &SbiRuntime::StepCAT, &SbiRuntime::StepLIKE, &SbiRuntime::StepIS, // load/save &SbiRuntime::StepARGC, // establish new Argv &SbiRuntime::StepARGV, // TOS ==> current Argv &SbiRuntime::StepINPUT, // Input ==> TOS &SbiRuntime::StepLINPUT, // Line Input ==> TOS &SbiRuntime::StepGET, // touch TOS &SbiRuntime::StepSET, // save object TOS ==> TOS-1 &SbiRuntime::StepPUT, // TOS ==> TOS-1 &SbiRuntime::StepPUTC, // TOS ==> TOS-1, then ReadOnly &SbiRuntime::StepDIM, // DIM &SbiRuntime::StepREDIM, // REDIM &SbiRuntime::StepREDIMP, // REDIM PRESERVE &SbiRuntime::StepERASE, // delete TOS // branch &SbiRuntime::StepSTOP, // program end &SbiRuntime::StepINITFOR, // initialize FOR-Variable &SbiRuntime::StepNEXT, // increment FOR-Variable &SbiRuntime::StepCASE, // beginning CASE &SbiRuntime::StepENDCASE, // end CASE &SbiRuntime::StepSTDERROR, // standard error handling &SbiRuntime::StepNOERROR, // no error handling &SbiRuntime::StepLEAVE, // leave UP // E/A &SbiRuntime::StepCHANNEL, // TOS = channel number &SbiRuntime::StepPRINT, // print TOS &SbiRuntime::StepPRINTF, // print TOS in field &SbiRuntime::StepWRITE, // write TOS &SbiRuntime::StepRENAME, // Rename Tos+1 to Tos &SbiRuntime::StepPROMPT, // define Input Prompt from TOS &SbiRuntime::StepRESTART, // Set restart point &SbiRuntime::StepCHANNEL0, // set E/A-channel 0 &SbiRuntime::StepEMPTY, // empty expression on stack &SbiRuntime::StepERROR, // TOS = error code &SbiRuntime::StepLSET, // save object TOS ==> TOS-1 &SbiRuntime::StepRSET, // save object TOS ==> TOS-1 &SbiRuntime::StepREDIMP_ERASE,// Copy array object for REDIMP &SbiRuntime::StepINITFOREACH,// Init for each loop &SbiRuntime::StepVBASET,// vba-like set statement &SbiRuntime::StepERASE_CLEAR,// vba-like set statement &SbiRuntime::StepARRAYACCESS,// access TOS as array &SbiRuntime::StepBYVAL, // access TOS as array }; SbiRuntime::pStep1 SbiRuntime::aStep1[] = { // all opcodes with one operand &SbiRuntime::StepLOADNC, // loading a numeric constant (+ID) &SbiRuntime::StepLOADSC, // loading a string constant (+ID) &SbiRuntime::StepLOADI, // Immediate Load (+value) &SbiRuntime::StepARGN, // save a named Args in Argv (+StringID) &SbiRuntime::StepPAD, // bring string to a definite length (+length) // branches &SbiRuntime::StepJUMP, // jump (+Target) &SbiRuntime::StepJUMPT, // evaluate TOS, conditional jump (+Target) &SbiRuntime::StepJUMPF, // evaluate TOS, conditional jump (+Target) &SbiRuntime::StepONJUMP, // evaluate TOS, jump into JUMP-table (+MaxVal) &SbiRuntime::StepGOSUB, // UP-call (+Target) &SbiRuntime::StepRETURN, // UP-return (+0 or Target) &SbiRuntime::StepTESTFOR, // check FOR-variable, increment (+Endlabel) &SbiRuntime::StepCASETO, // Tos+1 <= Case <= Tos), 2xremove (+Target) &SbiRuntime::StepERRHDL, // error handler (+Offset) &SbiRuntime::StepRESUME, // resume after errors (+0 or 1 or Label) // E/A &SbiRuntime::StepCLOSE, // (+channel/0) &SbiRuntime::StepPRCHAR, // (+char) // management &SbiRuntime::StepSETCLASS, // check set + class names (+StringId) &SbiRuntime::StepTESTCLASS, // Check TOS class (+StringId) &SbiRuntime::StepLIB, // lib for declare-call (+StringId) &SbiRuntime::StepBASED, // TOS is incremented by BASE, BASE is pushed before &SbiRuntime::StepARGTYP, // convert last parameter in Argv (+Type) &SbiRuntime::StepVBASETCLASS,// vba-like set statement }; SbiRuntime::pStep2 SbiRuntime::aStep2[] = {// all opcodes with two operands &SbiRuntime::StepRTL, // load from RTL (+StringID+Typ) &SbiRuntime::StepFIND, // load (+StringID+Typ) &SbiRuntime::StepELEM, // load element (+StringID+Typ) &SbiRuntime::StepPARAM, // Parameter (+Offset+Typ) // branches &SbiRuntime::StepCALL, // Declare-Call (+StringID+Typ) &SbiRuntime::StepCALLC, // CDecl-Declare-Call (+StringID+Typ) &SbiRuntime::StepCASEIS, // Case-Test (+Test-Opcode+False-Target) // management &SbiRuntime::StepSTMNT, // beginning of a statement (+Line+Col) // E/A &SbiRuntime::StepOPEN, // (+StreamMode+Flags) // Objects &SbiRuntime::StepLOCAL, // define local variable (+StringId+Typ) &SbiRuntime::StepPUBLIC, // module global variable (+StringID+Typ) &SbiRuntime::StepGLOBAL, // define global variable (+StringID+Typ) &SbiRuntime::StepCREATE, // create object (+StringId+StringId) &SbiRuntime::StepSTATIC, // static variable (+StringId+StringId) &SbiRuntime::StepTCREATE, // user-defined objects (+StringId+StringId) &SbiRuntime::StepDCREATE, // create object-array (+StringID+StringID) &SbiRuntime::StepGLOBAL_P, // define global variable which is not overwritten // by the Basic on a restart (+StringID+Typ) &SbiRuntime::StepFIND_G, // finds global variable with special treatment because of _GLOBAL_P &SbiRuntime::StepDCREATE_REDIMP, // redimension object array (+StringID+StringID) &SbiRuntime::StepFIND_CM, // Search inside a class module (CM) to enable global search in time &SbiRuntime::StepPUBLIC_P, // Search inside a class module (CM) to enable global search in time &SbiRuntime::StepFIND_STATIC, // Search inside a class module (CM) to enable global search in time }; // SbiRTLData SbiRTLData::SbiRTLData() { nDirFlags = SbAttributes::NONE; nCurDirPos = 0; } SbiRTLData::~SbiRTLData() { } // SbiInstance // 16.10.96: #31460 new concept for StepInto/Over/Out // The decision whether StepPoint shall be called is done with the help of // the CallLevel. It's stopped when the current CallLevel is <= nBreakCallLvl. // The current CallLevel can never be smaller than 1, as it's also incremented // during the call of a method (also main). Therefore a BreakCallLvl from 0 // means that the program isn't stopped at all. // (also have a look at: step2.cxx, SbiRuntime::StepSTMNT() ) void SbiInstance::CalcBreakCallLevel( BasicDebugFlags nFlags ) { nFlags &= ~BasicDebugFlags::Break; sal_uInt16 nRet; if (nFlags == BasicDebugFlags::StepInto) { nRet = nCallLvl + 1; // CallLevel+1 is also stopped } else if (nFlags == (BasicDebugFlags::StepOver | BasicDebugFlags::StepInto)) { nRet = nCallLvl; // current CallLevel is stopped } else if (nFlags == BasicDebugFlags::StepOut) { nRet = nCallLvl - 1; // smaller CallLevel is stopped } else { // Basic-IDE returns 0 instead of BasicDebugFlags::Continue, so also default=continue nRet = 0; // CallLevel is always > 0 -> no StepPoint } nBreakCallLvl = nRet; // take result } SbiInstance::SbiInstance( StarBASIC* p ) : pIosys(new SbiIoSystem) , pDdeCtrl(new SbiDdeControl) , pBasic(p) , meFormatterLangType(LANGUAGE_DONTKNOW) , meFormatterDateOrder(DateOrder::YMD) , nStdDateIdx(0) , nStdTimeIdx(0) , nStdDateTimeIdx(0) , nErr(0) , nErl(0) , bReschedule(true) , bCompatibility(false) , pRun(nullptr) , nCallLvl(0) , nBreakCallLvl(0) { } SbiInstance::~SbiInstance() { while( pRun ) { SbiRuntime* p = pRun->pNext; delete pRun; pRun = p; } try { int nSize = ComponentVector.size(); if( nSize ) { for( int i = nSize - 1 ; i >= 0 ; --i ) { Reference< XComponent > xDlgComponent = ComponentVector[i]; if( xDlgComponent.is() ) xDlgComponent->dispose(); } } } catch( const Exception& ) { TOOLS_WARN_EXCEPTION("basic", "SbiInstance::~SbiInstance: caught an exception while disposing the components" ); } } SbiDllMgr* SbiInstance::GetDllMgr() { if( !pDllMgr ) { pDllMgr.reset(new SbiDllMgr); } return pDllMgr.get(); } // #39629 create NumberFormatter with the help of a static method now std::shared_ptr const & SbiInstance::GetNumberFormatter() { LanguageType eLangType = Application::GetSettings().GetLanguageTag().getLanguageType(); SvtSysLocale aSysLocale; DateOrder eDate = aSysLocale.GetLocaleData().getDateOrder(); if( pNumberFormatter ) { if( eLangType != meFormatterLangType || eDate != meFormatterDateOrder ) { pNumberFormatter.reset(); } } meFormatterLangType = eLangType; meFormatterDateOrder = eDate; if( !pNumberFormatter ) { pNumberFormatter = PrepareNumberFormatter( nStdDateIdx, nStdTimeIdx, nStdDateTimeIdx, &meFormatterLangType, &meFormatterDateOrder); } return pNumberFormatter; } // #39629 offer NumberFormatter static too std::shared_ptr SbiInstance::PrepareNumberFormatter( sal_uInt32 &rnStdDateIdx, sal_uInt32 &rnStdTimeIdx, sal_uInt32 &rnStdDateTimeIdx, LanguageType const * peFormatterLangType, DateOrder const * peFormatterDateOrder ) { LanguageType eLangType; if( peFormatterLangType ) { eLangType = *peFormatterLangType; } else { eLangType = Application::GetSettings().GetLanguageTag().getLanguageType(); } DateOrder eDate; if( peFormatterDateOrder ) { eDate = *peFormatterDateOrder; } else { SvtSysLocale aSysLocale; eDate = aSysLocale.GetLocaleData().getDateOrder(); } std::shared_ptr pNumberFormatter = std::make_shared( comphelper::getProcessComponentContext(), eLangType ); // Several parser methods pass SvNumberFormatter::IsNumberFormat() a number // format index to parse against. Tell the formatter the proper date // evaluation order, which also determines the date acceptance patterns to // use if a format was passed. NF_EVALDATEFORMAT_FORMAT restricts to the // format's locale's date patterns/order (no init/system locale match // tried) and falls back to NF_EVALDATEFORMAT_INTL if no specific (i.e. 0) // (or an unknown) format index was passed. pNumberFormatter->SetEvalDateFormat( NF_EVALDATEFORMAT_FORMAT); sal_Int32 nCheckPos = 0; SvNumFormatType nType; rnStdTimeIdx = pNumberFormatter->GetStandardFormat( SvNumFormatType::TIME, eLangType ); // the formatter's standard templates have only got a two-digit date // -> registering an own format // HACK, because the numberformatter doesn't swap the place holders // for month, day and year according to the system setting. // Problem: Print Year(Date) under engl. BS // also have a look at: basic/source/sbx/sbxdate.cxx OUString aDateStr; switch( eDate ) { default: case DateOrder::MDY: aDateStr = "MM/DD/YYYY"; break; case DateOrder::DMY: aDateStr = "DD/MM/YYYY"; break; case DateOrder::YMD: aDateStr = "YYYY/MM/DD"; break; } OUString aStr( aDateStr ); // PutandConvertEntry() modifies string! pNumberFormatter->PutandConvertEntry( aStr, nCheckPos, nType, rnStdDateIdx, LANGUAGE_ENGLISH_US, eLangType, true); nCheckPos = 0; aDateStr += " HH:MM:SS"; aStr = aDateStr; pNumberFormatter->PutandConvertEntry( aStr, nCheckPos, nType, rnStdDateTimeIdx, LANGUAGE_ENGLISH_US, eLangType, true); return pNumberFormatter; } // Let engine run. If Flags == BasicDebugFlags::Continue, take Flags over void SbiInstance::Stop() { for( SbiRuntime* p = pRun; p; p = p->pNext ) { p->Stop(); } } // Allows Basic IDE to set watch mode to suppress errors static bool bWatchMode = false; void setBasicWatchMode( bool bOn ) { bWatchMode = bOn; } void SbiInstance::Error( ErrCode n ) { Error( n, OUString() ); } void SbiInstance::Error( ErrCode n, const OUString& rMsg ) { if( !bWatchMode ) { aErrorMsg = rMsg; pRun->Error( n ); } } void SbiInstance::ErrorVB( sal_Int32 nVBNumber, const OUString& rMsg ) { if( !bWatchMode ) { ErrCode n = StarBASIC::GetSfxFromVBError( static_cast< sal_uInt16 >( nVBNumber ) ); if ( !n ) { n = ErrCode(nVBNumber); // force orig number, probably should have a specific table of vb ( localized ) errors } aErrorMsg = rMsg; SbiRuntime::translateErrorToVba( n, aErrorMsg ); pRun->Error( ERRCODE_BASIC_COMPAT, true/*bVBATranslationAlreadyDone*/ ); } } void SbiInstance::setErrorVB( sal_Int32 nVBNumber ) { ErrCode n = StarBASIC::GetSfxFromVBError( static_cast< sal_uInt16 >( nVBNumber ) ); if( !n ) { n = ErrCode(nVBNumber); // force orig number, probably should have a specific table of vb ( localized ) errors } aErrorMsg = OUString(); SbiRuntime::translateErrorToVba( n, aErrorMsg ); nErr = n; } void SbiInstance::FatalError( ErrCode n ) { pRun->FatalError( n ); } void SbiInstance::FatalError( ErrCode _errCode, const OUString& _details ) { pRun->FatalError( _errCode, _details ); } void SbiInstance::Abort() { StarBASIC* pErrBasic = GetCurrentBasic( pBasic ); pErrBasic->RTError( nErr, aErrorMsg, pRun->nLine, pRun->nCol1, pRun->nCol2 ); StarBASIC::Stop(); } // can be unequal to pRTBasic StarBASIC* GetCurrentBasic( StarBASIC* pRTBasic ) { StarBASIC* pCurBasic = pRTBasic; SbModule* pActiveModule = StarBASIC::GetActiveModule(); if( pActiveModule ) { SbxObject* pParent = pActiveModule->GetParent(); if (StarBASIC *pBasic = dynamic_cast(pParent)) pCurBasic = pBasic; } return pCurBasic; } SbModule* SbiInstance::GetActiveModule() { if( pRun ) { return pRun->GetModule(); } else { return nullptr; } } SbMethod* SbiInstance::GetCaller( sal_uInt16 nLevel ) { SbiRuntime* p = pRun; while( nLevel-- && p ) { p = p->pNext; } return p ? p->GetCaller() : nullptr; } // SbiInstance // Attention: pMeth can also be NULL (on a call of the init-code) SbiRuntime::SbiRuntime( SbModule* pm, SbMethod* pe, sal_uInt32 nStart ) : rBasic( *static_cast(pm->pParent) ), pInst( GetSbData()->pInst ), pMod( pm ), pMeth( pe ), pImg( pMod->pImage ), mpExtCaller(nullptr), m_nLastTime(0) { nFlags = pe ? pe->GetDebugFlags() : BasicDebugFlags::NONE; pIosys = pInst->GetIoSystem(); pForStk = nullptr; pError = nullptr; pErrCode = pErrStmnt = pRestart = nullptr; pNext = nullptr; pCode = pStmnt = reinterpret_cast(pImg->GetCode()) + nStart; bRun = bError = true; bInError = false; bBlocked = false; nLine = 0; nCol1 = 0; nCol2 = 0; nExprLvl = 0; nArgc = 0; nError = ERRCODE_NONE; nForLvl = 0; nOps = 0; refExprStk = new SbxArray; SetVBAEnabled( pMod->IsVBACompat() ); SetParameters( pe ? pe->GetParameters() : nullptr ); } SbiRuntime::~SbiRuntime() { ClearArgvStack(); ClearForStack(); } void SbiRuntime::SetVBAEnabled(bool bEnabled ) { bVBAEnabled = bEnabled; if ( bVBAEnabled ) { if ( pMeth ) { mpExtCaller = pMeth->mCaller; } } else { mpExtCaller = nullptr; } } // tdf#79426, tdf#125180 - adds the information about a missing parameter void SbiRuntime::SetIsMissing( SbxVariable* pVar ) { SbxInfo* pInfo = pVar->GetInfo() ? pVar->GetInfo() : new SbxInfo(); pInfo->AddParam( pVar->GetName(), SbxMISSING, pVar->GetFlags() ); pVar->SetInfo( pInfo ); } // tdf#79426, tdf#125180 - checks if a variable contains the information about a missing parameter bool SbiRuntime::IsMissing( SbxVariable* pVar, sal_uInt16 nIdx ) { return pVar->GetInfo() && pVar->GetInfo()->GetParam( nIdx ) && pVar->GetInfo()->GetParam( nIdx )->eType & SbxMISSING; } // Construction of the parameter list. All ByRef-parameters are directly // taken over; copies of ByVal-parameters are created. If a particular // data type is requested, it is converted. void SbiRuntime::SetParameters( SbxArray* pParams ) { refParams = new SbxArray; // for the return value refParams->Put32( pMeth, 0 ); SbxInfo* pInfo = pMeth ? pMeth->GetInfo() : nullptr; sal_uInt32 nParamCount = pParams ? pParams->Count32() : 1; assert(nParamCount <= std::numeric_limits::max()); if( nParamCount > 1 ) { for( sal_uInt32 i = 1 ; i < nParamCount ; i++ ) { const SbxParamInfo* p = pInfo ? pInfo->GetParam( sal::static_int_cast(i) ) : nullptr; // #111897 ParamArray if( p && (p->nUserData & PARAM_INFO_PARAMARRAY) != 0 ) { SbxDimArray* pArray = new SbxDimArray( SbxVARIANT ); sal_uInt32 nParamArrayParamCount = nParamCount - i; pArray->unoAddDim32( 0, nParamArrayParamCount - 1 ); for (sal_uInt32 j = i; j < nParamCount ; ++j) { SbxVariable* v = pParams->Get32( j ); sal_Int32 aDimIndex[1]; aDimIndex[0] = j - i; pArray->Put32(v, aDimIndex); } SbxVariable* pArrayVar = new SbxVariable( SbxVARIANT ); pArrayVar->SetFlag( SbxFlagBits::ReadWrite ); pArrayVar->PutObject( pArray ); refParams->Put32( pArrayVar, i ); // Block ParamArray for missing parameter pInfo = nullptr; break; } SbxVariable* v = pParams->Get32( i ); // methods are always byval! bool bByVal = dynamic_cast(v) != nullptr; SbxDataType t = v->GetType(); bool bTargetTypeIsArray = false; if( p ) { bByVal |= ( p->eType & SbxBYREF ) == 0; // tdf#79426, tdf#125180 - don't convert missing arguments to the requested parameter type if ( t != SbxEMPTY && !IsMissing( v, 1 ) ) { t = static_cast( p->eType & 0x0FFF ); } if( !bByVal && t != SbxVARIANT && (!v->IsFixed() || static_cast(v->GetType() & 0x0FFF ) != t) ) { bByVal = true; } bTargetTypeIsArray = (p->nUserData & PARAM_INFO_WITHBRACKETS) != 0; } if( bByVal ) { // tdf#79426, tdf#125180 - don't convert missing arguments to the requested parameter type if( bTargetTypeIsArray && !IsMissing( v, 1 ) ) { t = SbxOBJECT; } SbxVariable* v2 = new SbxVariable( t ); v2->SetFlag( SbxFlagBits::ReadWrite ); // tdf#79426, tdf#125180 - if parameter was missing, readd additional information about a missing parameter if ( IsMissing( v, 1 ) ) { SetIsMissing( v2 ); } *v2 = *v; refParams->Put32( v2, i ); } else { // tdf#79426, tdf#125180 - don't convert missing arguments to the requested parameter type if( t != SbxVARIANT && !IsMissing( v, 1 ) && t != ( v->GetType() & 0x0FFF ) ) { if( p && (p->eType & SbxARRAY) ) { Error( ERRCODE_BASIC_CONVERSION ); } else { v->Convert( t ); } } refParams->Put32( v, i ); } if( p ) { refParams->PutAlias32( p->aName, i ); } } } // ParamArray for missing parameter if( pInfo ) { // #111897 Check first missing parameter for ParamArray const SbxParamInfo* p = pInfo->GetParam(sal::static_int_cast(nParamCount)); if( p && (p->nUserData & PARAM_INFO_PARAMARRAY) != 0 ) { SbxDimArray* pArray = new SbxDimArray( SbxVARIANT ); pArray->unoAddDim32( 0, -1 ); SbxVariable* pArrayVar = new SbxVariable( SbxVARIANT ); pArrayVar->SetFlag( SbxFlagBits::ReadWrite ); pArrayVar->PutObject( pArray ); refParams->Put32( pArrayVar, nParamCount ); } } } // execute a P-Code bool SbiRuntime::Step() { if( bRun ) { // in any case check casually! if( !( ++nOps & 0xF ) && pInst->IsReschedule() ) { sal_uInt32 nTime = osl_getGlobalTimer(); if (nTime - m_nLastTime > 5 ) // 20 ms { Application::Reschedule(); m_nLastTime = nTime; } } // #i48868 blocked by next call level? while( bBlocked ) { if( pInst->IsReschedule() ) { Application::Reschedule(); } } SbiOpcode eOp = static_cast( *pCode++ ); sal_uInt32 nOp1, nOp2; if (eOp <= SbiOpcode::SbOP0_END) { (this->*( aStep0[ int(eOp) ] ) )(); } else if (eOp >= SbiOpcode::SbOP1_START && eOp <= SbiOpcode::SbOP1_END) { nOp1 = *pCode++; nOp1 |= *pCode++ << 8; nOp1 |= *pCode++ << 16; nOp1 |= *pCode++ << 24; (this->*( aStep1[ int(eOp) - int(SbiOpcode::SbOP1_START) ] ) )( nOp1 ); } else if (eOp >= SbiOpcode::SbOP2_START && eOp <= SbiOpcode::SbOP2_END) { nOp1 = *pCode++; nOp1 |= *pCode++ << 8; nOp1 |= *pCode++ << 16; nOp1 |= *pCode++ << 24; nOp2 = *pCode++; nOp2 |= *pCode++ << 8; nOp2 |= *pCode++ << 16; nOp2 |= *pCode++ << 24; (this->*( aStep2[ int(eOp) - int(SbiOpcode::SbOP2_START) ] ) )( nOp1, nOp2 ); } else { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } ErrCode nErrCode = SbxBase::GetError(); Error( nErrCode.IgnoreWarning() ); // from 13.2.1997, new error handling: // ATTENTION: nError can be set already even if !nErrCode // since nError can now also be set from other RT-instances if( nError ) { SbxBase::ResetError(); } // from 15.3.96: display errors only if BASIC is still active // (especially not after compiler errors at the runtime) if( nError && bRun ) { ErrCode err = nError; ClearExprStack(); nError = ERRCODE_NONE; pInst->nErr = err; pInst->nErl = nLine; pErrCode = pCode; pErrStmnt = pStmnt; // An error occurred in an error handler // force parent handler ( if there is one ) // to handle the error bool bLetParentHandleThis = false; // in the error handler? so std-error if ( !bInError ) { bInError = true; if( !bError ) // On Error Resume Next { StepRESUME( 1 ); } else if( pError ) // On Error Goto ... { pCode = pError; } else { bLetParentHandleThis = true; } } else { bLetParentHandleThis = true; pError = nullptr; //terminate the handler } if ( bLetParentHandleThis ) { // from 13.2.1997, new error handling: // consider superior error handlers // there's no error handler -> find one farther above SbiRuntime* pRtErrHdl = nullptr; SbiRuntime* pRt = this; while( (pRt = pRt->pNext) != nullptr ) { if( !pRt->bError || pRt->pError != nullptr ) { pRtErrHdl = pRt; break; } } if( pRtErrHdl ) { // manipulate all the RTs that are below in the call-stack pRt = this; do { pRt->nError = err; if( pRt != pRtErrHdl ) { pRt->bRun = false; } else { break; } pRt = pRt->pNext; } while( pRt ); } // no error-hdl found -> old behaviour else { pInst->Abort(); } } } } return bRun; } void SbiRuntime::Error( ErrCode n, bool bVBATranslationAlreadyDone ) { if( n ) { nError = n; if( isVBAEnabled() && !bVBATranslationAlreadyDone ) { OUString aMsg = pInst->GetErrorMsg(); sal_Int32 nVBAErrorNumber = translateErrorToVba( nError, aMsg ); SbxVariable* pSbxErrObjVar = SbxErrObject::getErrObject().get(); SbxErrObject* pGlobErr = static_cast< SbxErrObject* >( pSbxErrObjVar ); if( pGlobErr != nullptr ) { pGlobErr->setNumberAndDescription( nVBAErrorNumber, aMsg ); } pInst->aErrorMsg = aMsg; nError = ERRCODE_BASIC_COMPAT; } } } void SbiRuntime::Error( ErrCode _errCode, const OUString& _details ) { if ( _errCode ) { // Not correct for class module usage, remove for now //OSL_WARN_IF( pInst->pRun != this, "basic", "SbiRuntime::Error: can't propagate the error message details!" ); if ( pInst->pRun == this ) { pInst->Error( _errCode, _details ); //OSL_WARN_IF( nError != _errCode, "basic", "SbiRuntime::Error: the instance is expected to propagate the error code back to me!" ); } else { nError = _errCode; } } } void SbiRuntime::FatalError( ErrCode n ) { StepSTDERROR(); Error( n ); } void SbiRuntime::FatalError( ErrCode _errCode, const OUString& _details ) { StepSTDERROR(); Error( _errCode, _details ); } sal_Int32 SbiRuntime::translateErrorToVba( ErrCode nError, OUString& rMsg ) { // If a message is defined use that ( in preference to // the defined one for the error ) NB #TODO // if there is an error defined it more than likely // is not the one you want ( some are the same though ) // we really need a new vba compatible error list if ( rMsg.isEmpty() ) { StarBASIC::MakeErrorText( nError, rMsg ); rMsg = StarBASIC::GetErrorText(); if ( rMsg.isEmpty() ) // no message for err no, need localized resource here { rMsg = "Internal Object Error:"; } } // no num? most likely then it *is* really a vba err sal_uInt16 nVBErrorCode = StarBASIC::GetVBErrorCode( nError ); sal_Int32 nVBAErrorNumber = ( nVBErrorCode == 0 ) ? sal_uInt32(nError) : nVBErrorCode; return nVBAErrorNumber; } // Stacks // The expression-stack is available for the continuous evaluation // of expressions. void SbiRuntime::PushVar( SbxVariable* pVar ) { if( pVar ) { refExprStk->Put32( pVar, nExprLvl++ ); } } SbxVariableRef SbiRuntime::PopVar() { #ifdef DBG_UTIL if( !nExprLvl ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); return new SbxVariable; } #endif SbxVariableRef xVar = refExprStk->Get32( --nExprLvl ); SAL_INFO_IF( xVar->GetName() == "Cells", "basic", "PopVar: Name equals 'Cells'" ); // methods hold themselves in parameter 0 if( dynamic_cast(xVar.get()) != nullptr ) { xVar->SetParameters(nullptr); } return xVar; } void SbiRuntime::ClearExprStack() { // Attention: Clear() doesn't suffice as methods must be deleted while ( nExprLvl ) { PopVar(); } refExprStk->Clear(); } // Take variable from the expression-stack without removing it // n counts from 0 SbxVariable* SbiRuntime::GetTOS() { short n = nExprLvl - 1; #ifdef DBG_UTIL if( n < 0 ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); return new SbxVariable; } #endif return refExprStk->Get32( static_cast(n) ); } void SbiRuntime::TOSMakeTemp() { SbxVariable* p = refExprStk->Get32( nExprLvl - 1 ); if ( p->GetType() == SbxEMPTY ) { p->Broadcast( SfxHintId::BasicDataWanted ); } SbxVariable* pDflt = nullptr; if ( bVBAEnabled && ( p->GetType() == SbxOBJECT || p->GetType() == SbxVARIANT ) && ((pDflt = getDefaultProp(p)) != nullptr) ) { pDflt->Broadcast( SfxHintId::BasicDataWanted ); // replacing new p on stack causes object pointed by // pDft->pParent to be deleted, when p2->Compute() is // called below pParent is accessed (but it's deleted) // so set it to NULL now pDflt->SetParent( nullptr ); p = new SbxVariable( *pDflt ); p->SetFlag( SbxFlagBits::ReadWrite ); refExprStk->Put32( p, nExprLvl - 1 ); } else if( p->GetRefCount() != 1 ) { SbxVariable* pNew = new SbxVariable( *p ); pNew->SetFlag( SbxFlagBits::ReadWrite ); refExprStk->Put32( pNew, nExprLvl - 1 ); } } // the GOSUB-stack collects return-addresses for GOSUBs void SbiRuntime::PushGosub( const sal_uInt8* pc ) { if( pGosubStk.size() >= MAXRECURSION ) { StarBASIC::FatalError( ERRCODE_BASIC_STACK_OVERFLOW ); } pGosubStk.emplace_back(pc, nForLvl); } void SbiRuntime::PopGosub() { if( pGosubStk.empty() ) { Error( ERRCODE_BASIC_NO_GOSUB ); } else { pCode = pGosubStk.back().pCode; pGosubStk.pop_back(); } } // the Argv-stack collects current argument-vectors void SbiRuntime::PushArgv() { pArgvStk.emplace_back(refArgv, nArgc); nArgc = 1; refArgv.clear(); } void SbiRuntime::PopArgv() { if( !pArgvStk.empty() ) { refArgv = pArgvStk.back().refArgv; nArgc = pArgvStk.back().nArgc; pArgvStk.pop_back(); } } void SbiRuntime::ClearArgvStack() { while( !pArgvStk.empty() ) { PopArgv(); } } // Push of the for-stack. The stack has increment, end, begin and variable. // After the creation of the stack-element the stack's empty. void SbiRuntime::PushFor() { SbiForStack* p = new SbiForStack; p->eForType = ForType::To; p->pNext = pForStk; pForStk = p; p->refInc = PopVar(); p->refEnd = PopVar(); SbxVariableRef xBgn = PopVar(); p->refVar = PopVar(); *(p->refVar) = *xBgn; nForLvl++; } void SbiRuntime::PushForEach() { SbiForStack* p = new SbiForStack; p->pNext = pForStk; pForStk = p; SbxVariableRef xObjVar = PopVar(); SbxBase* pObj = xObjVar.is() ? xObjVar->GetObject() : nullptr; if( pObj == nullptr ) { Error( ERRCODE_BASIC_NO_OBJECT ); return; } bool bError_ = false; if (SbxDimArray* pArray = dynamic_cast(pObj)) { p->eForType = ForType::EachArray; p->refEnd = reinterpret_cast(pArray); sal_Int32 nDims = pArray->GetDims32(); p->pArrayLowerBounds.reset( new sal_Int32[nDims] ); p->pArrayUpperBounds.reset( new sal_Int32[nDims] ); p->pArrayCurIndices.reset( new sal_Int32[nDims] ); sal_Int32 lBound, uBound; for( sal_Int32 i = 0 ; i < nDims ; i++ ) { pArray->GetDim32( i+1, lBound, uBound ); p->pArrayCurIndices[i] = p->pArrayLowerBounds[i] = lBound; p->pArrayUpperBounds[i] = uBound; } } else if (BasicCollection* pCollection = dynamic_cast(pObj)) { p->eForType = ForType::EachCollection; p->refEnd = pCollection; p->nCurCollectionIndex = 0; } else if (SbUnoObject* pUnoObj = dynamic_cast(pObj)) { // XEnumerationAccess? Any aAny = pUnoObj->getUnoAny(); Reference< XEnumerationAccess > xEnumerationAccess; if( aAny >>= xEnumerationAccess ) { p->xEnumeration = xEnumerationAccess->createEnumeration(); p->eForType = ForType::EachXEnumeration; } else if ( isVBAEnabled() && pUnoObj->isNativeCOMObject() ) { uno::Reference< script::XInvocation > xInvocation; if ( ( aAny >>= xInvocation ) && xInvocation.is() ) { try { p->xEnumeration = new ComEnumerationWrapper( xInvocation ); p->eForType = ForType::EachXEnumeration; } catch(const uno::Exception& ) {} } if ( !p->xEnumeration.is() ) { bError_ = true; } } else { bError_ = true; } } else { bError_ = true; } if( bError_ ) { Error( ERRCODE_BASIC_CONVERSION ); return; } // Container variable p->refVar = PopVar(); nForLvl++; } void SbiRuntime::PopFor() { if( pForStk ) { SbiForStack* p = pForStk; pForStk = p->pNext; delete p; nForLvl--; } } void SbiRuntime::ClearForStack() { while( pForStk ) { PopFor(); } } SbiForStack* SbiRuntime::FindForStackItemForCollection( class BasicCollection const * pCollection ) { for (SbiForStack *p = pForStk; p; p = p->pNext) { SbxVariable* pVar = p->refEnd.is() ? p->refEnd.get() : nullptr; if( p->eForType == ForType::EachCollection && pVar != nullptr && dynamic_cast( pVar) == pCollection ) { return p; } } return nullptr; } // DLL-calls void SbiRuntime::DllCall ( const OUString& aFuncName, const OUString& aDLLName, SbxArray* pArgs, // parameter (from index 1, can be NULL) SbxDataType eResType, // return value bool bCDecl ) // true: according to C-conventions { // NOT YET IMPLEMENTED SbxVariable* pRes = new SbxVariable( eResType ); SbiDllMgr* pDllMgr = pInst->GetDllMgr(); ErrCode nErr = pDllMgr->Call( aFuncName, aDLLName, pArgs, *pRes, bCDecl ); if( nErr ) { Error( nErr ); } PushVar( pRes ); } bool SbiRuntime::IsImageFlag( SbiImageFlags n ) const { return pImg->IsFlag( n ); } sal_uInt16 SbiRuntime::GetBase() const { return pImg->GetBase(); } void SbiRuntime::StepNOP() {} void SbiRuntime::StepArith( SbxOperator eOp ) { SbxVariableRef p1 = PopVar(); TOSMakeTemp(); SbxVariable* p2 = GetTOS(); p2->ResetFlag( SbxFlagBits::Fixed ); p2->Compute( eOp, *p1 ); checkArithmeticOverflow( p2 ); } void SbiRuntime::StepUnary( SbxOperator eOp ) { TOSMakeTemp(); SbxVariable* p = GetTOS(); p->Compute( eOp, *p ); } void SbiRuntime::StepCompare( SbxOperator eOp ) { SbxVariableRef p1 = PopVar(); SbxVariableRef p2 = PopVar(); // Make sure objects with default params have // values ( and type ) set as appropriate SbxDataType p1Type = p1->GetType(); SbxDataType p2Type = p2->GetType(); if ( p1Type == SbxEMPTY ) { p1->Broadcast( SfxHintId::BasicDataWanted ); p1Type = p1->GetType(); } if ( p2Type == SbxEMPTY ) { p2->Broadcast( SfxHintId::BasicDataWanted ); p2Type = p2->GetType(); } if ( p1Type == p2Type ) { // if both sides are an object and have default props // then we need to use the default props // we don't need to worry if only one side ( lhs, rhs ) is an // object ( object side will get coerced to correct type in // Compare ) if ( p1Type == SbxOBJECT ) { SbxVariable* pDflt = getDefaultProp( p1.get() ); if ( pDflt ) { p1 = pDflt; p1->Broadcast( SfxHintId::BasicDataWanted ); } pDflt = getDefaultProp( p2.get() ); if ( pDflt ) { p2 = pDflt; p2->Broadcast( SfxHintId::BasicDataWanted ); } } } static SbxVariable* pTRUE = nullptr; static SbxVariable* pFALSE = nullptr; // why do this on non-windows ? // why do this at all ? // I dumbly follow the pattern :-/ if ( bVBAEnabled && ( p1->IsNull() || p2->IsNull() ) ) { static SbxVariable* pNULL = [&]() { SbxVariable* p = new SbxVariable; p->PutNull(); p->AddFirstRef(); return p; }(); PushVar( pNULL ); } else if( p2->Compare( eOp, *p1 ) ) { if( !pTRUE ) { pTRUE = new SbxVariable; pTRUE->PutBool( true ); pTRUE->AddFirstRef(); } PushVar( pTRUE ); } else { if( !pFALSE ) { pFALSE = new SbxVariable; pFALSE->PutBool( false ); pFALSE->AddFirstRef(); } PushVar( pFALSE ); } } void SbiRuntime::StepEXP() { StepArith( SbxEXP ); } void SbiRuntime::StepMUL() { StepArith( SbxMUL ); } void SbiRuntime::StepDIV() { StepArith( SbxDIV ); } void SbiRuntime::StepIDIV() { StepArith( SbxIDIV ); } void SbiRuntime::StepMOD() { StepArith( SbxMOD ); } void SbiRuntime::StepPLUS() { StepArith( SbxPLUS ); } void SbiRuntime::StepMINUS() { StepArith( SbxMINUS ); } void SbiRuntime::StepCAT() { StepArith( SbxCAT ); } void SbiRuntime::StepAND() { StepArith( SbxAND ); } void SbiRuntime::StepOR() { StepArith( SbxOR ); } void SbiRuntime::StepXOR() { StepArith( SbxXOR ); } void SbiRuntime::StepEQV() { StepArith( SbxEQV ); } void SbiRuntime::StepIMP() { StepArith( SbxIMP ); } void SbiRuntime::StepNEG() { StepUnary( SbxNEG ); } void SbiRuntime::StepNOT() { StepUnary( SbxNOT ); } void SbiRuntime::StepEQ() { StepCompare( SbxEQ ); } void SbiRuntime::StepNE() { StepCompare( SbxNE ); } void SbiRuntime::StepLT() { StepCompare( SbxLT ); } void SbiRuntime::StepGT() { StepCompare( SbxGT ); } void SbiRuntime::StepLE() { StepCompare( SbxLE ); } void SbiRuntime::StepGE() { StepCompare( SbxGE ); } namespace { bool NeedEsc(sal_Unicode cCode) { if(!rtl::isAscii(cCode)) { return false; } switch(cCode) { case '.': case '^': case '$': case '+': case '\\': case '|': case '{': case '}': case '(': case ')': return true; default: return false; } } OUString VBALikeToRegexp(const OUString &rIn) { OUStringBuffer sResult; const sal_Unicode *start = rIn.getStr(); const sal_Unicode *end = start + rIn.getLength(); int seenright = 0; sResult.append('^'); while (start < end) { switch (*start) { case '?': sResult.append('.'); start++; break; case '*': sResult.append(".*"); start++; break; case '#': sResult.append("[0-9]"); start++; break; case ']': sResult.append('\\'); sResult.append(*start++); break; case '[': sResult.append(*start++); seenright = 0; while (start < end && !seenright) { switch (*start) { case '[': case '?': case '*': sResult.append('\\'); sResult.append(*start); break; case ']': sResult.append(*start); seenright = 1; break; case '!': sResult.append('^'); break; default: if (NeedEsc(*start)) { sResult.append('\\'); } sResult.append(*start); break; } start++; } break; default: if (NeedEsc(*start)) { sResult.append('\\'); } sResult.append(*start++); } } sResult.append('$'); return sResult.makeStringAndClear(); } } void SbiRuntime::StepLIKE() { SbxVariableRef refVar1 = PopVar(); SbxVariableRef refVar2 = PopVar(); OUString pattern = VBALikeToRegexp(refVar1->GetOUString()); OUString value = refVar2->GetOUString(); i18nutil::SearchOptions2 aSearchOpt; aSearchOpt.AlgorithmType2 = css::util::SearchAlgorithms2::REGEXP; aSearchOpt.Locale = Application::GetSettings().GetLanguageTag().getLocale(); aSearchOpt.searchString = pattern; bool bTextMode(true); bool bCompatibility = ( GetSbData()->pInst && GetSbData()->pInst->IsCompatibility() ); if( bCompatibility ) { bTextMode = IsImageFlag( SbiImageFlags::COMPARETEXT ); } if( bTextMode ) { aSearchOpt.transliterateFlags |= TransliterationFlags::IGNORE_CASE; } SbxVariable* pRes = new SbxVariable; utl::TextSearch aSearch( aSearchOpt); sal_Int32 nStart=0, nEnd=value.getLength(); bool bRes = aSearch.SearchForward(value, &nStart, &nEnd); pRes->PutBool( bRes ); PushVar( pRes ); } // TOS and TOS-1 are both object variables and contain the same pointer void SbiRuntime::StepIS() { SbxVariableRef refVar1 = PopVar(); SbxVariableRef refVar2 = PopVar(); SbxDataType eType1 = refVar1->GetType(); SbxDataType eType2 = refVar2->GetType(); if ( eType1 == SbxEMPTY ) { refVar1->Broadcast( SfxHintId::BasicDataWanted ); eType1 = refVar1->GetType(); } if ( eType2 == SbxEMPTY ) { refVar2->Broadcast( SfxHintId::BasicDataWanted ); eType2 = refVar2->GetType(); } bool bRes = ( eType1 == SbxOBJECT && eType2 == SbxOBJECT ); if ( bVBAEnabled && !bRes ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); } bRes = ( bRes && refVar1->GetObject() == refVar2->GetObject() ); SbxVariable* pRes = new SbxVariable; pRes->PutBool( bRes ); PushVar( pRes ); } // update the value of TOS void SbiRuntime::StepGET() { SbxVariable* p = GetTOS(); p->Broadcast( SfxHintId::BasicDataWanted ); } // #67607 copy Uno-Structs static bool checkUnoStructCopy( bool bVBA, SbxVariableRef const & refVal, SbxVariableRef const & refVar ) { SbxDataType eVarType = refVar->GetType(); SbxDataType eValType = refVal->GetType(); if ( ( bVBA && ( eVarType == SbxEMPTY ) ) || !refVar->CanWrite() ) return false; if ( eValType != SbxOBJECT ) return false; // we seem to be duplicating parts of SbxValue=operator, maybe we should just move this to // there :-/ not sure if for every '=' we would want struct handling if( eVarType != SbxOBJECT ) { if ( refVar->IsFixed() ) return false; } // #115826: Exclude ProcedureProperties to avoid call to Property Get procedure else if( dynamic_cast( refVar.get() ) != nullptr ) return false; SbxObjectRef xValObj = static_cast(refVal->GetObject()); if( !xValObj.is() || dynamic_cast( xValObj.get() ) != nullptr ) return false; SbUnoObject* pUnoVal = dynamic_cast( xValObj.get() ); SbUnoStructRefObject* pUnoStructVal = dynamic_cast( xValObj.get() ); Any aAny; // make doubly sure value is either a Uno object or // a uno struct if ( pUnoVal || pUnoStructVal ) aAny = pUnoVal ? pUnoVal->getUnoAny() : pUnoStructVal->getUnoAny(); else return false; if ( aAny.getValueType().getTypeClass() == TypeClass_STRUCT ) { refVar->SetType( SbxOBJECT ); ErrCode eOldErr = SbxBase::GetError(); // There are some circumstances when calling GetObject // will trigger an error, we need to squash those here. // Alternatively it is possible that the same scenario // could overwrite and existing error. Lets prevent that SbxObjectRef xVarObj = static_cast(refVar->GetObject()); if ( eOldErr != ERRCODE_NONE ) SbxBase::SetError( eOldErr ); else SbxBase::ResetError(); SbUnoStructRefObject* pUnoStructObj = dynamic_cast( xVarObj.get() ); OUString sClassName = pUnoVal ? pUnoVal->GetClassName() : pUnoStructVal->GetClassName(); OUString sName = pUnoVal ? pUnoVal->GetName() : pUnoStructVal->GetName(); if ( pUnoStructObj ) { StructRefInfo aInfo = pUnoStructObj->getStructInfo(); aInfo.setValue( aAny ); } else { SbUnoObject* pNewUnoObj = new SbUnoObject( sName, aAny ); // #70324: adopt ClassName pNewUnoObj->SetClassName( sClassName ); refVar->PutObject( pNewUnoObj ); } return true; } return false; } // laying down TOS in TOS-1 void SbiRuntime::StepPUT() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); // store on its own method (inside a function)? bool bFlagsChanged = false; SbxFlagBits n = SbxFlagBits::NONE; if( refVar.get() == pMeth ) { bFlagsChanged = true; n = refVar->GetFlags(); refVar->SetFlag( SbxFlagBits::Write ); } // if left side arg is an object or variant and right handside isn't // either an object or a variant then try and see if a default // property exists. // to use e.g. Range{"A1") = 34 // could equate to Range("A1").Value = 34 if ( bVBAEnabled ) { // yet more hacking at this, I feel we don't quite have the correct // heuristics for dealing with obj1 = obj2 ( where obj2 ( and maybe // obj1 ) has default member/property ) ) It seems that default props // aren't dealt with if the object is a member of some parent object bool bObjAssign = false; if ( refVar->GetType() == SbxEMPTY ) refVar->Broadcast( SfxHintId::BasicDataWanted ); if ( refVar->GetType() == SbxOBJECT ) { if ( dynamic_cast(refVar.get()) != nullptr || ! refVar->GetParent() ) { SbxVariable* pDflt = getDefaultProp( refVar.get() ); if ( pDflt ) refVar = pDflt; } else bObjAssign = true; } if ( refVal->GetType() == SbxOBJECT && !bObjAssign && ( dynamic_cast(refVal.get()) != nullptr || ! refVal->GetParent() ) ) { SbxVariable* pDflt = getDefaultProp( refVal.get() ); if ( pDflt ) refVal = pDflt; } } if ( !checkUnoStructCopy( bVBAEnabled, refVal, refVar ) ) *refVar = *refVal; if( bFlagsChanged ) refVar->SetFlags( n ); } namespace { // VBA Dim As New behavior handling, save init object information struct DimAsNewRecoverItem { OUString m_aObjClass; OUString m_aObjName; SbxObject* m_pObjParent; SbModule* m_pClassModule; DimAsNewRecoverItem() : m_pObjParent( nullptr ) , m_pClassModule( nullptr ) {} DimAsNewRecoverItem( const OUString& rObjClass, const OUString& rObjName, SbxObject* pObjParent, SbModule* pClassModule ) : m_aObjClass( rObjClass ) , m_aObjName( rObjName ) , m_pObjParent( pObjParent ) , m_pClassModule( pClassModule ) {} }; struct SbxVariablePtrHash { size_t operator()( SbxVariable* pVar ) const { return reinterpret_cast(pVar); } }; } typedef std::unordered_map< SbxVariable*, DimAsNewRecoverItem, SbxVariablePtrHash > DimAsNewRecoverHash; namespace { class GaDimAsNewRecoverHash : public rtl::Static {}; } void removeDimAsNewRecoverItem( SbxVariable* pVar ) { DimAsNewRecoverHash &rDimAsNewRecoverHash = GaDimAsNewRecoverHash::get(); DimAsNewRecoverHash::iterator it = rDimAsNewRecoverHash.find( pVar ); if( it != rDimAsNewRecoverHash.end() ) { rDimAsNewRecoverHash.erase( it ); } } // saving object variable // not-object variables will cause errors static const char pCollectionStr[] = "Collection"; void SbiRuntime::StepSET_Impl( SbxVariableRef& refVal, SbxVariableRef& refVar, bool bHandleDefaultProp ) { // #67733 types with array-flag are OK too // Check var, !object is no error for sure if, only if type is fixed SbxDataType eVarType = refVar->GetType(); if( !bHandleDefaultProp && eVarType != SbxOBJECT && !(eVarType & SbxARRAY) && refVar->IsFixed() ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); return; } // Check value, !object is no error for sure if, only if type is fixed SbxDataType eValType = refVal->GetType(); if( !bHandleDefaultProp && eValType != SbxOBJECT && !(eValType & SbxARRAY) && refVal->IsFixed() ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); return; } // Getting in here causes problems with objects with default properties // if they are SbxEMPTY I guess if ( !bHandleDefaultProp || eValType == SbxOBJECT ) { // activate GetObject for collections on refVal SbxBase* pObjVarObj = refVal->GetObject(); if( pObjVarObj ) { SbxVariableRef refObjVal = dynamic_cast( pObjVarObj ); if( refObjVal.is() ) { refVal = refObjVal; } else if( !(eValType & SbxARRAY) ) { refVal = nullptr; } } } // #52896 refVal can be invalid here, if uno-sequences - or more // general arrays - are assigned to variables that are declared // as an object! if( !refVal.is() ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); } else { bool bFlagsChanged = false; SbxFlagBits n = SbxFlagBits::NONE; if( refVar.get() == pMeth ) { bFlagsChanged = true; n = refVar->GetFlags(); refVar->SetFlag( SbxFlagBits::Write ); } SbProcedureProperty* pProcProperty = dynamic_cast( refVar.get() ); if( pProcProperty ) { pProcProperty->setSet( true ); } if ( bHandleDefaultProp ) { // get default properties for lhs & rhs where necessary // SbxVariable* defaultProp = NULL; unused variable // LHS try determine if a default prop exists // again like in StepPUT (see there too ) we are tweaking the // heuristics again for when to assign an object reference or // use default members if they exist // #FIXME we really need to get to the bottom of this mess bool bObjAssign = false; if ( refVar->GetType() == SbxOBJECT ) { if ( dynamic_cast(refVar.get()) != nullptr || ! refVar->GetParent() ) { SbxVariable* pDflt = getDefaultProp( refVar.get() ); if ( pDflt ) { refVar = pDflt; } } else bObjAssign = true; } // RHS only get a default prop is the rhs has one if ( refVal->GetType() == SbxOBJECT ) { // check if lhs is a null object // if it is then use the object not the default property SbxObject* pObj = dynamic_cast( refVar.get() ); // calling GetObject on a SbxEMPTY variable raises // object not set errors, make sure it's an Object if ( !pObj && refVar->GetType() == SbxOBJECT ) { SbxBase* pObjVarObj = refVar->GetObject(); pObj = dynamic_cast( pObjVarObj ); } SbxVariable* pDflt = nullptr; if ( pObj && !bObjAssign ) { // lhs is either a valid object || or has a defaultProp pDflt = getDefaultProp( refVal.get() ); } if ( pDflt ) { refVal = pDflt; } } } // Handle Dim As New bool bDimAsNew = bVBAEnabled && refVar->IsSet( SbxFlagBits::DimAsNew ); SbxBaseRef xPrevVarObj; if( bDimAsNew ) { xPrevVarObj = refVar->GetObject(); } // Handle withevents bool bWithEvents = refVar->IsSet( SbxFlagBits::WithEvents ); if ( bWithEvents ) { Reference< XInterface > xComListener; SbxBase* pObj = refVal->GetObject(); SbUnoObject* pUnoObj = dynamic_cast( pObj ); if( pUnoObj != nullptr ) { Any aControlAny = pUnoObj->getUnoAny(); OUString aDeclareClassName = refVar->GetDeclareClassName(); OUString aPrefix = refVar->GetName(); SbxObjectRef xScopeObj = refVar->GetParent(); xComListener = createComListener( aControlAny, aDeclareClassName, aPrefix, xScopeObj ); refVal->SetDeclareClassName( aDeclareClassName ); refVal->SetComListener( xComListener, &rBasic ); // Hold reference } } // lhs is a property who's value is currently (Empty e.g. no broadcast yet) // in this case if there is a default prop involved the value of the // default property may in fact be void so the type will also be SbxEMPTY // in this case we do not want to call checkUnoStructCopy 'cause that will // cause an error also if ( !checkUnoStructCopy( bHandleDefaultProp, refVal, refVar ) ) { *refVar = *refVal; } if ( bDimAsNew ) { if( dynamic_cast( refVar.get() ) == nullptr ) { SbxBase* pValObjBase = refVal->GetObject(); if( pValObjBase == nullptr ) { if( xPrevVarObj.is() ) { // Object is overwritten with NULL, instantiate init object DimAsNewRecoverHash &rDimAsNewRecoverHash = GaDimAsNewRecoverHash::get(); DimAsNewRecoverHash::iterator it = rDimAsNewRecoverHash.find( refVar.get() ); if( it != rDimAsNewRecoverHash.end() ) { const DimAsNewRecoverItem& rItem = it->second; if( rItem.m_pClassModule != nullptr ) { SbClassModuleObject* pNewObj = new SbClassModuleObject( rItem.m_pClassModule ); pNewObj->SetName( rItem.m_aObjName ); pNewObj->SetParent( rItem.m_pObjParent ); refVar->PutObject( pNewObj ); } else if( rItem.m_aObjClass.equalsIgnoreAsciiCase( pCollectionStr ) ) { BasicCollection* pNewCollection = new BasicCollection( pCollectionStr ); pNewCollection->SetName( rItem.m_aObjName ); pNewCollection->SetParent( rItem.m_pObjParent ); refVar->PutObject( pNewCollection ); } } } } else { // Does old value exist? bool bFirstInit = !xPrevVarObj.is(); if( bFirstInit ) { // Store information to instantiate object later SbxObject* pValObj = dynamic_cast( pValObjBase ); if( pValObj != nullptr ) { OUString aObjClass = pValObj->GetClassName(); SbClassModuleObject* pClassModuleObj = dynamic_cast( pValObjBase ); DimAsNewRecoverHash &rDimAsNewRecoverHash = GaDimAsNewRecoverHash::get(); if( pClassModuleObj != nullptr ) { SbModule* pClassModule = pClassModuleObj->getClassModule(); rDimAsNewRecoverHash[refVar.get()] = DimAsNewRecoverItem( aObjClass, pValObj->GetName(), pValObj->GetParent(), pClassModule ); } else if( aObjClass.equalsIgnoreAsciiCase( "Collection" ) ) { rDimAsNewRecoverHash[refVar.get()] = DimAsNewRecoverItem( aObjClass, pValObj->GetName(), pValObj->GetParent(), nullptr ); } } } } } } if( bFlagsChanged ) { refVar->SetFlags( n ); } } } void SbiRuntime::StepSET() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); StepSET_Impl( refVal, refVar, bVBAEnabled ); // this is really assignment } void SbiRuntime::StepVBASET() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); // don't handle default property StepSET_Impl( refVal, refVar ); // set obj = something } void SbiRuntime::StepLSET() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); if( refVar->GetType() != SbxSTRING || refVal->GetType() != SbxSTRING ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); } else { SbxFlagBits n = refVar->GetFlags(); if( refVar.get() == pMeth ) { refVar->SetFlag( SbxFlagBits::Write ); } OUString aRefVarString = refVar->GetOUString(); OUString aRefValString = refVal->GetOUString(); sal_Int32 nVarStrLen = aRefVarString.getLength(); sal_Int32 nValStrLen = aRefValString.getLength(); OUString aNewStr; if( nVarStrLen > nValStrLen ) { OUStringBuffer buf(aRefValString); comphelper::string::padToLength(buf, nVarStrLen, ' '); aNewStr = buf.makeStringAndClear(); } else { aNewStr = aRefValString.copy( 0, nVarStrLen ); } refVar->PutString(aNewStr); refVar->SetFlags( n ); } } void SbiRuntime::StepRSET() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); if( refVar->GetType() != SbxSTRING || refVal->GetType() != SbxSTRING ) { Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); } else { SbxFlagBits n = refVar->GetFlags(); if( refVar.get() == pMeth ) { refVar->SetFlag( SbxFlagBits::Write ); } OUString aRefVarString = refVar->GetOUString(); OUString aRefValString = refVal->GetOUString(); sal_Int32 nVarStrLen = aRefVarString.getLength(); sal_Int32 nValStrLen = aRefValString.getLength(); OUStringBuffer aNewStr(nVarStrLen); if (nVarStrLen > nValStrLen) { comphelper::string::padToLength(aNewStr, nVarStrLen - nValStrLen, ' '); aNewStr.append(aRefValString); } else { aNewStr.append(std::u16string_view(aRefValString).substr(0, nVarStrLen)); } refVar->PutString(aNewStr.makeStringAndClear()); refVar->SetFlags( n ); } } // laying down TOS in TOS-1, then set ReadOnly-Bit void SbiRuntime::StepPUTC() { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); refVar->SetFlag( SbxFlagBits::Write ); *refVar = *refVal; refVar->ResetFlag( SbxFlagBits::Write ); refVar->SetFlag( SbxFlagBits::Const ); } // DIM // TOS = variable for the array with dimension information as parameter void SbiRuntime::StepDIM() { SbxVariableRef refVar = PopVar(); DimImpl( refVar ); } // #56204 swap out DIM-functionality into a help method (step0.cxx) void SbiRuntime::DimImpl(const SbxVariableRef& refVar) { // If refDim then this DIM statement is terminating a ReDIM and // previous StepERASE_CLEAR for an array, the following actions have // been delayed from ( StepERASE_CLEAR ) 'till here if ( refRedim.is() ) { if ( !refRedimpArray.is() ) // only erase the array not ReDim Preserve { lcl_eraseImpl( refVar, bVBAEnabled ); } SbxDataType eType = refVar->GetType(); lcl_clearImpl( refVar, eType ); refRedim = nullptr; } SbxArray* pDims = refVar->GetParameters(); // must have an even number of arguments // have in mind that Arg[0] does not count! if( pDims && !( pDims->Count32() & 1 ) ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } else { SbxDataType eType = refVar->IsFixed() ? refVar->GetType() : SbxVARIANT; SbxDimArray* pArray = new SbxDimArray( eType ); // allow arrays without dimension information, too (VB-compatible) if( pDims ) { refVar->ResetFlag( SbxFlagBits::VarToDim ); for( sal_uInt32 i = 1; i < pDims->Count32(); ) { sal_Int32 lb = pDims->Get32( i++ )->GetLong(); sal_Int32 ub = pDims->Get32( i++ )->GetLong(); if( ub < lb ) { Error( ERRCODE_BASIC_OUT_OF_RANGE ); ub = lb; } pArray->AddDim32( lb, ub ); if ( lb != ub ) { pArray->setHasFixedSize( true ); } } } else { // #62867 On creating an array of the length 0, create // a dimension (like for Uno-Sequences of the length 0) pArray->unoAddDim32( 0, -1 ); } SbxFlagBits nSavFlags = refVar->GetFlags(); refVar->ResetFlag( SbxFlagBits::Fixed ); refVar->PutObject( pArray ); refVar->SetFlags( nSavFlags ); refVar->SetParameters( nullptr ); } } // REDIM // TOS = variable for the array // argv = dimension information void SbiRuntime::StepREDIM() { // Nothing different than dim at the moment because // a double dim is already recognized by the compiler. StepDIM(); } // Helper function for StepREDIMP and StepDCREATE_IMPL / bRedimp = true static void implCopyDimArray( SbxDimArray* pNewArray, SbxDimArray* pOldArray, sal_Int32 nMaxDimIndex, sal_Int32 nActualDim, sal_Int32* pActualIndices, sal_Int32* pLowerBounds, sal_Int32* pUpperBounds ) { sal_Int32& ri = pActualIndices[nActualDim]; for( ri = pLowerBounds[nActualDim] ; ri <= pUpperBounds[nActualDim] ; ri++ ) { if( nActualDim < nMaxDimIndex ) { implCopyDimArray( pNewArray, pOldArray, nMaxDimIndex, nActualDim + 1, pActualIndices, pLowerBounds, pUpperBounds ); } else { SbxVariable* pSource = pOldArray->Get32( pActualIndices ); pNewArray->Put32(pSource, pActualIndices); } } } // Returns true when actually restored static bool implRestorePreservedArray(SbxDimArray* pNewArray, SbxArrayRef& rrefRedimpArray, bool* pbWasError = nullptr) { assert(pNewArray); bool bResult = false; if (pbWasError) *pbWasError = false; if (rrefRedimpArray) { SbxDimArray* pOldArray = static_cast(rrefRedimpArray.get()); const sal_Int32 nDimsNew = pNewArray->GetDims32(); const sal_Int32 nDimsOld = pOldArray->GetDims32(); if (nDimsOld != nDimsNew) { StarBASIC::Error(ERRCODE_BASIC_OUT_OF_RANGE); if (pbWasError) *pbWasError = true; } else if (nDimsNew > 0) { // Store dims to use them for copying later std::unique_ptr pLowerBounds(new sal_Int32[nDimsNew]); std::unique_ptr pUpperBounds(new sal_Int32[nDimsNew]); std::unique_ptr pActualIndices(new sal_Int32[nDimsNew]); bool bNeedsPreallocation = true; // Compare bounds for (sal_Int32 i = 1; i <= nDimsNew; i++) { sal_Int32 lBoundNew, uBoundNew; sal_Int32 lBoundOld, uBoundOld; pNewArray->GetDim32(i, lBoundNew, uBoundNew); pOldArray->GetDim32(i, lBoundOld, uBoundOld); lBoundNew = std::max(lBoundNew, lBoundOld); uBoundNew = std::min(uBoundNew, uBoundOld); sal_Int32 j = i - 1; pActualIndices[j] = pLowerBounds[j] = lBoundNew; pUpperBounds[j] = uBoundNew; if (lBoundNew > uBoundNew) // No elements in the dimension -> no elements to restore bNeedsPreallocation = false; } // Optimization: pre-allocate underlying container if (bNeedsPreallocation) pNewArray->Put32(nullptr, pUpperBounds.get()); // Copy data from old array by going recursively through all dimensions // (It would be faster to work on the flat internal data array of an // SbyArray but this solution is clearer and easier) implCopyDimArray(pNewArray, pOldArray, nDimsNew - 1, 0, pActualIndices.get(), pLowerBounds.get(), pUpperBounds.get()); bResult = true; } rrefRedimpArray.clear(); } return bResult; } // REDIM PRESERVE // TOS = variable for the array // argv = dimension information void SbiRuntime::StepREDIMP() { SbxVariableRef refVar = PopVar(); DimImpl( refVar ); // Now check, if we can copy from the old array if( refRedimpArray.is() ) { if (SbxDimArray* pNewArray = dynamic_cast(refVar->GetObject())) implRestorePreservedArray(pNewArray, refRedimpArray); } } // REDIM_COPY // TOS = Array-Variable, Reference to array is copied // Variable is cleared as in ERASE void SbiRuntime::StepREDIMP_ERASE() { SbxVariableRef refVar = PopVar(); refRedim = refVar; SbxDataType eType = refVar->GetType(); if( eType & SbxARRAY ) { SbxBase* pElemObj = refVar->GetObject(); SbxDimArray* pDimArray = dynamic_cast( pElemObj ); if( pDimArray ) { refRedimpArray = pDimArray; } } else if( refVar->IsFixed() ) { refVar->Clear(); } else { refVar->SetType( SbxEMPTY ); } } static void lcl_clearImpl( SbxVariableRef const & refVar, SbxDataType const & eType ) { SbxFlagBits nSavFlags = refVar->GetFlags(); refVar->ResetFlag( SbxFlagBits::Fixed ); refVar->SetType( SbxDataType(eType & 0x0FFF) ); refVar->SetFlags( nSavFlags ); refVar->Clear(); } static void lcl_eraseImpl( SbxVariableRef const & refVar, bool bVBAEnabled ) { SbxDataType eType = refVar->GetType(); if( eType & SbxARRAY ) { if ( bVBAEnabled ) { SbxBase* pElemObj = refVar->GetObject(); SbxDimArray* pDimArray = dynamic_cast( pElemObj ); if( pDimArray ) { if ( pDimArray->hasFixedSize() ) { // Clear all Value(s) pDimArray->SbxArray::Clear(); } else { pDimArray->Clear(); // clear dims and values } } else { SbxArray* pArray = dynamic_cast( pElemObj ); if ( pArray ) { pArray->Clear(); } } } else { // Arrays have on an erase to VB quite a complex behaviour. Here are // only the type problems at REDIM (#26295) removed at first: // Set type hard onto the array-type, because a variable with array is // SbxOBJECT. At REDIM there's an SbxOBJECT-array generated then and // the original type is lost -> runtime error lcl_clearImpl( refVar, eType ); } } else if( refVar->IsFixed() ) { refVar->Clear(); } else { refVar->SetType( SbxEMPTY ); } } // delete variable // TOS = variable void SbiRuntime::StepERASE() { SbxVariableRef refVar = PopVar(); lcl_eraseImpl( refVar, bVBAEnabled ); } void SbiRuntime::StepERASE_CLEAR() { refRedim = PopVar(); } void SbiRuntime::StepARRAYACCESS() { if( !refArgv.is() ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } SbxVariableRef refVar = PopVar(); refVar->SetParameters( refArgv.get() ); PopArgv(); PushVar( CheckArray( refVar.get() ) ); } void SbiRuntime::StepBYVAL() { // Copy variable on stack to break call by reference SbxVariableRef pVar = PopVar(); SbxDataType t = pVar->GetType(); SbxVariable* pCopyVar = new SbxVariable( t ); pCopyVar->SetFlag( SbxFlagBits::ReadWrite ); *pCopyVar = *pVar; PushVar( pCopyVar ); } // establishing an argv // nOp1 stays as it is -> 1st element is the return value void SbiRuntime::StepARGC() { PushArgv(); refArgv = new SbxArray; nArgc = 1; } // storing an argument in Argv void SbiRuntime::StepARGV() { if( !refArgv.is() ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } else { SbxVariableRef pVal = PopVar(); // Before fix of #94916: if( dynamic_cast( pVal.get() ) != nullptr || dynamic_cast( pVal.get() ) != nullptr || dynamic_cast( pVal.get() ) != nullptr ) { // evaluate methods and properties! SbxVariable* pRes = new SbxVariable( *pVal ); pVal = pRes; } refArgv->Put32( pVal.get(), nArgc++ ); } } // Input to Variable. The variable is on TOS and is // is removed afterwards. void SbiRuntime::StepINPUT() { OUStringBuffer sin; OUString s; char ch = 0; ErrCode err; // Skip whitespace while( ( err = pIosys->GetError() ) == ERRCODE_NONE ) { ch = pIosys->Read(); if( ch != ' ' && ch != '\t' && ch != '\n' ) { break; } } if( !err ) { // Scan until comma or whitespace char sep = ( ch == '"' ) ? ch : 0; if( sep ) { ch = pIosys->Read(); } while( ( err = pIosys->GetError() ) == ERRCODE_NONE ) { if( ch == sep ) { ch = pIosys->Read(); if( ch != sep ) { break; } } else if( !sep && (ch == ',' || ch == '\n') ) { break; } sin.append( ch ); ch = pIosys->Read(); } // skip whitespace if( ch == ' ' || ch == '\t' ) { while( ( err = pIosys->GetError() ) == ERRCODE_NONE ) { if( ch != ' ' && ch != '\t' && ch != '\n' ) { break; } ch = pIosys->Read(); } } } if( !err ) { s = sin.makeStringAndClear(); SbxVariableRef pVar = GetTOS(); // try to fill the variable with a numeric value first, // then with a string value if( !pVar->IsFixed() || pVar->IsNumeric() ) { sal_uInt16 nLen = 0; if( !pVar->Scan( s, &nLen ) ) { err = SbxBase::GetError(); SbxBase::ResetError(); } // the value has to be scanned in completely else if( nLen != s.getLength() && !pVar->PutString( s ) ) { err = SbxBase::GetError(); SbxBase::ResetError(); } else if( nLen != s.getLength() && pVar->IsNumeric() ) { err = SbxBase::GetError(); SbxBase::ResetError(); if( !err ) { err = ERRCODE_BASIC_CONVERSION; } } } else { pVar->PutString( s ); err = SbxBase::GetError(); SbxBase::ResetError(); } } if( err == ERRCODE_BASIC_USER_ABORT ) { Error( err ); } else if( err ) { if( pRestart && !pIosys->GetChannel() ) { pCode = pRestart; } else { Error( err ); } } else { PopVar(); } } // Line Input to Variable. The variable is on TOS and is // deleted afterwards. void SbiRuntime::StepLINPUT() { OString aInput; pIosys->Read( aInput ); Error( pIosys->GetError() ); SbxVariableRef p = PopVar(); p->PutString(OStringToOUString(aInput, osl_getThreadTextEncoding())); } // end of program void SbiRuntime::StepSTOP() { pInst->Stop(); } void SbiRuntime::StepINITFOR() { PushFor(); } void SbiRuntime::StepINITFOREACH() { PushForEach(); } // increment FOR-variable void SbiRuntime::StepNEXT() { if( !pForStk ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); return; } if( pForStk->eForType == ForType::To ) { pForStk->refVar->Compute( SbxPLUS, *pForStk->refInc ); } } // beginning CASE: TOS in CASE-stack void SbiRuntime::StepCASE() { if( !refCaseStk.is() ) { refCaseStk = new SbxArray; } SbxVariableRef xVar = PopVar(); refCaseStk->Put32( xVar.get(), refCaseStk->Count32() ); } // end CASE: free variable void SbiRuntime::StepENDCASE() { if( !refCaseStk.is() || !refCaseStk->Count32() ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } else { refCaseStk->Remove( refCaseStk->Count32() - 1 ); } } void SbiRuntime::StepSTDERROR() { pError = nullptr; bError = true; pInst->aErrorMsg.clear(); pInst->nErr = ERRCODE_NONE; pInst->nErl = 0; nError = ERRCODE_NONE; SbxErrObject::getUnoErrObject()->Clear(); } void SbiRuntime::StepNOERROR() { pInst->aErrorMsg.clear(); pInst->nErr = ERRCODE_NONE; pInst->nErl = 0; nError = ERRCODE_NONE; SbxErrObject::getUnoErrObject()->Clear(); bError = false; } // leave UP void SbiRuntime::StepLEAVE() { bRun = false; // If VBA and we are leaving an ErrorHandler then clear the error ( it's been processed ) if ( bInError && pError ) { SbxErrObject::getUnoErrObject()->Clear(); } } void SbiRuntime::StepCHANNEL() // TOS = channel number { SbxVariableRef pChan = PopVar(); short nChan = pChan->GetInteger(); pIosys->SetChannel( nChan ); Error( pIosys->GetError() ); } void SbiRuntime::StepCHANNEL0() { pIosys->ResetChannel(); } void SbiRuntime::StepPRINT() // print TOS { SbxVariableRef p = PopVar(); OUString s1 = p->GetOUString(); OUString s; if( p->GetType() >= SbxINTEGER && p->GetType() <= SbxDOUBLE ) { s = " "; // one blank before } s += s1; pIosys->Write( s ); Error( pIosys->GetError() ); } void SbiRuntime::StepPRINTF() // print TOS in field { SbxVariableRef p = PopVar(); OUString s1 = p->GetOUString(); OUStringBuffer s; if( p->GetType() >= SbxINTEGER && p->GetType() <= SbxDOUBLE ) { s.append(' '); } s.append(s1); comphelper::string::padToLength(s, 14, ' '); pIosys->Write( s.makeStringAndClear() ); Error( pIosys->GetError() ); } void SbiRuntime::StepWRITE() // write TOS { SbxVariableRef p = PopVar(); // Does the string have to be encapsulated? char ch = 0; switch (p->GetType() ) { case SbxSTRING: ch = '"'; break; case SbxCURRENCY: case SbxBOOL: case SbxDATE: ch = '#'; break; default: break; } OUString s; if( ch ) { s += OUString(ch); } s += p->GetOUString(); if( ch ) { s += OUString(ch); } pIosys->Write( s ); Error( pIosys->GetError() ); } void SbiRuntime::StepRENAME() // Rename Tos+1 to Tos { SbxVariableRef pTos1 = PopVar(); SbxVariableRef pTos = PopVar(); OUString aDest = pTos1->GetOUString(); OUString aSource = pTos->GetOUString(); if( hasUno() ) { implStepRenameUCB( aSource, aDest ); } else { implStepRenameOSL( aSource, aDest ); } } // TOS = Prompt void SbiRuntime::StepPROMPT() { SbxVariableRef p = PopVar(); OString aStr(OUStringToOString(p->GetOUString(), osl_getThreadTextEncoding())); pIosys->SetPrompt( aStr ); } // Set Restart point void SbiRuntime::StepRESTART() { pRestart = pCode; } // empty expression on stack for missing parameter void SbiRuntime::StepEMPTY() { // #57915 The semantics of StepEMPTY() is the representation of a missing argument. // This is represented by the value 448 (ERRCODE_BASIC_NAMED_NOT_FOUND) of the type error // in VB. StepEmpty should now rather be named StepMISSING() but the name is kept // to simplify matters. SbxVariableRef xVar = new SbxVariable( SbxVARIANT ); xVar->PutErr( 448 ); // tdf#79426, tdf#125180 - add additional information about a missing parameter SetIsMissing( xVar.get() ); PushVar( xVar.get() ); } // TOS = error code void SbiRuntime::StepERROR() { SbxVariableRef refCode = PopVar(); sal_uInt16 n = refCode->GetUShort(); ErrCode error = StarBASIC::GetSfxFromVBError( n ); if ( bVBAEnabled ) { pInst->Error( error ); } else { Error( error ); } } // loading a numeric constant (+ID) void SbiRuntime::StepLOADNC( sal_uInt32 nOp1 ) { // #57844 use localized function OUString aStr = pImg->GetString( static_cast( nOp1 ) ); // also allow , !!! sal_Int32 iComma = aStr.indexOf(','); if( iComma >= 0 ) { aStr = aStr.replaceAt(iComma, 1, "."); } sal_Int32 nParseEnd = 0; rtl_math_ConversionStatus eStatus = rtl_math_ConversionStatus_Ok; double n = ::rtl::math::stringToDouble( aStr, '.', ',', &eStatus, &nParseEnd ); // tdf#131296 - retrieve data type put in SbiExprNode::Gen SbxDataType eType = SbxDOUBLE; if ( nParseEnd < aStr.getLength() ) { switch ( aStr[nParseEnd] ) { // See GetSuffixType in basic/source/comp/scanner.cxx for type characters case '%': eType = SbxINTEGER; break; case '&': eType = SbxLONG; break; case '!': eType = SbxSINGLE; break; case '@': eType = SbxCURRENCY; break; } } SbxVariable* p = new SbxVariable( eType ); p->PutDouble( n ); PushVar( p ); } // loading a string constant (+ID) void SbiRuntime::StepLOADSC( sal_uInt32 nOp1 ) { SbxVariable* p = new SbxVariable; p->PutString( pImg->GetString( static_cast( nOp1 ) ) ); PushVar( p ); } // Immediate Load (+value) // The opcode is not generated in SbiExprNode::Gen anymore; used for legacy images void SbiRuntime::StepLOADI( sal_uInt32 nOp1 ) { SbxVariable* p = new SbxVariable; p->PutInteger( static_cast( nOp1 ) ); PushVar( p ); } // store a named argument in Argv (+Arg-no. from 1!) void SbiRuntime::StepARGN( sal_uInt32 nOp1 ) { if( !refArgv.is() ) StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); else { OUString aAlias( pImg->GetString( static_cast( nOp1 ) ) ); SbxVariableRef pVal = PopVar(); if( bVBAEnabled && ( dynamic_cast( pVal.get()) != nullptr || dynamic_cast( pVal.get()) != nullptr || dynamic_cast( pVal.get()) != nullptr ) ) { // named variables ( that are Any especially properties ) can be empty at this point and need a broadcast if ( pVal->GetType() == SbxEMPTY ) pVal->Broadcast( SfxHintId::BasicDataWanted ); // evaluate methods and properties! SbxVariable* pRes = new SbxVariable( *pVal ); pVal = pRes; } refArgv->Put32( pVal.get(), nArgc ); refArgv->PutAlias32( aAlias, nArgc++ ); } } // converting the type of an argument in Argv for DECLARE-Fkt. (+type) void SbiRuntime::StepARGTYP( sal_uInt32 nOp1 ) { if( !refArgv.is() ) StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); else { bool bByVal = (nOp1 & 0x8000) != 0; // Is BYVAL requested? SbxDataType t = static_cast(nOp1 & 0x7FFF); SbxVariable* pVar = refArgv->Get32( refArgv->Count32() - 1 ); // last Arg // check BYVAL if( pVar->GetRefCount() > 2 ) // 2 is normal for BYVAL { // parameter is a reference if( bByVal ) { // Call by Value is requested -> create a copy pVar = new SbxVariable( *pVar ); pVar->SetFlag( SbxFlagBits::ReadWrite ); refExprStk->Put32( pVar, refArgv->Count32() - 1 ); } else pVar->SetFlag( SbxFlagBits::Reference ); // Ref-Flag for DllMgr } else { // parameter is NO reference if( bByVal ) pVar->ResetFlag( SbxFlagBits::Reference ); // no reference -> OK else Error( ERRCODE_BASIC_BAD_PARAMETERS ); // reference needed } if( pVar->GetType() != t ) { // variant for correct conversion // besides error, if SbxBYREF pVar->Convert( SbxVARIANT ); pVar->Convert( t ); } } } // bring string to a definite length (+length) void SbiRuntime::StepPAD( sal_uInt32 nOp1 ) { SbxVariable* p = GetTOS(); OUString s = p->GetOUString(); sal_Int32 nLen(nOp1); if( s.getLength() != nLen ) { OUStringBuffer aBuf(s); if (aBuf.getLength() > nLen) { comphelper::string::truncateToLength(aBuf, nLen); } else { comphelper::string::padToLength(aBuf, nLen, ' '); } s = aBuf.makeStringAndClear(); } } // jump (+target) void SbiRuntime::StepJUMP( sal_uInt32 nOp1 ) { #ifdef DBG_UTIL // #QUESTION shouldn't this be // if( (sal_uInt8*)( nOp1+pImagGetCode() ) >= pImg->GetCodeSize() ) if( nOp1 >= pImg->GetCodeSize() ) StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); #endif pCode = reinterpret_cast(pImg->GetCode()) + nOp1; } // evaluate TOS, conditional jump (+target) void SbiRuntime::StepJUMPT( sal_uInt32 nOp1 ) { SbxVariableRef p = PopVar(); if( p->GetBool() ) StepJUMP( nOp1 ); } // evaluate TOS, conditional jump (+target) void SbiRuntime::StepJUMPF( sal_uInt32 nOp1 ) { SbxVariableRef p = PopVar(); // In a test e.g. If Null then // will evaluate Null will act as if False if( ( bVBAEnabled && p->IsNull() ) || !p->GetBool() ) StepJUMP( nOp1 ); } // evaluate TOS, jump into JUMP-table (+MaxVal) // looks like this: // ONJUMP 2 // JUMP target1 // JUMP target2 // if 0x8000 is set in the operand, push the return address (ON..GOSUB) void SbiRuntime::StepONJUMP( sal_uInt32 nOp1 ) { SbxVariableRef p = PopVar(); sal_Int16 n = p->GetInteger(); if( nOp1 & 0x8000 ) { nOp1 &= 0x7FFF; PushGosub( pCode + 5 * nOp1 ); } if( n < 1 || o3tl::make_unsigned(n) > nOp1 ) n = static_cast( nOp1 + 1 ); nOp1 = static_cast( reinterpret_cast(pCode) - pImg->GetCode() ) + 5 * --n; StepJUMP( nOp1 ); } // UP-call (+target) void SbiRuntime::StepGOSUB( sal_uInt32 nOp1 ) { PushGosub( pCode ); if( nOp1 >= pImg->GetCodeSize() ) StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); pCode = reinterpret_cast(pImg->GetCode()) + nOp1; } // UP-return (+0 or target) void SbiRuntime::StepRETURN( sal_uInt32 nOp1 ) { PopGosub(); if( nOp1 ) StepJUMP( nOp1 ); } // check FOR-variable (+Endlabel) void SbiRuntime::StepTESTFOR( sal_uInt32 nOp1 ) { if( !pForStk ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); return; } bool bEndLoop = false; switch( pForStk->eForType ) { case ForType::To: { SbxOperator eOp = ( pForStk->refInc->GetDouble() < 0 ) ? SbxLT : SbxGT; if( pForStk->refVar->Compare( eOp, *pForStk->refEnd ) ) bEndLoop = true; break; } case ForType::EachArray: { SbiForStack* p = pForStk; if( p->pArrayCurIndices == nullptr ) { bEndLoop = true; } else { SbxDimArray* pArray = reinterpret_cast(p->refEnd.get()); sal_Int32 nDims = pArray->GetDims32(); // Empty array? if( nDims == 1 && p->pArrayLowerBounds[0] > p->pArrayUpperBounds[0] ) { bEndLoop = true; break; } SbxVariable* pVal = pArray->Get32( p->pArrayCurIndices.get() ); *(p->refVar) = *pVal; bool bFoundNext = false; for(sal_Int32 i = 0 ; i < nDims ; i++ ) { if( p->pArrayCurIndices[i] < p->pArrayUpperBounds[i] ) { bFoundNext = true; p->pArrayCurIndices[i]++; for( sal_Int32 j = i - 1 ; j >= 0 ; j-- ) p->pArrayCurIndices[j] = p->pArrayLowerBounds[j]; break; } } if( !bFoundNext ) { p->pArrayCurIndices.reset(); } } break; } case ForType::EachCollection: { BasicCollection* pCollection = static_cast(pForStk->refEnd.get()); SbxArrayRef xItemArray = pCollection->xItemArray; sal_Int32 nCount = xItemArray->Count32(); if( pForStk->nCurCollectionIndex < nCount ) { SbxVariable* pRes = xItemArray->Get32( pForStk->nCurCollectionIndex ); pForStk->nCurCollectionIndex++; (*pForStk->refVar) = *pRes; } else { bEndLoop = true; } break; } case ForType::EachXEnumeration: { SbiForStack* p = pForStk; if( p->xEnumeration->hasMoreElements() ) { Any aElem = p->xEnumeration->nextElement(); SbxVariableRef xVar = new SbxVariable( SbxVARIANT ); unoToSbxValue( xVar.get(), aElem ); (*pForStk->refVar) = *xVar; } else { bEndLoop = true; } break; } } if( bEndLoop ) { PopFor(); StepJUMP( nOp1 ); } } // Tos+1 <= Tos+2 <= Tos, 2xremove (+Target) void SbiRuntime::StepCASETO( sal_uInt32 nOp1 ) { if( !refCaseStk.is() || !refCaseStk->Count32() ) StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); else { SbxVariableRef xTo = PopVar(); SbxVariableRef xFrom = PopVar(); SbxVariableRef xCase = refCaseStk->Get32( refCaseStk->Count32() - 1 ); if( *xCase >= *xFrom && *xCase <= *xTo ) StepJUMP( nOp1 ); } } void SbiRuntime::StepERRHDL( sal_uInt32 nOp1 ) { const sal_uInt8* p = pCode; StepJUMP( nOp1 ); pError = pCode; pCode = p; pInst->aErrorMsg.clear(); pInst->nErr = ERRCODE_NONE; pInst->nErl = 0; nError = ERRCODE_NONE; SbxErrObject::getUnoErrObject()->Clear(); } // Resume after errors (+0=statement, 1=next or Label) void SbiRuntime::StepRESUME( sal_uInt32 nOp1 ) { // #32714 Resume without error? -> error if( !bInError ) { Error( ERRCODE_BASIC_BAD_RESUME ); return; } if( nOp1 ) { // set Code-pointer to the next statement sal_uInt16 n1, n2; pCode = pMod->FindNextStmnt( pErrCode, n1, n2, true, pImg ); } else pCode = pErrStmnt; if ( pError ) // current in error handler ( and got a Resume Next statement ) SbxErrObject::getUnoErrObject()->Clear(); if( nOp1 > 1 ) StepJUMP( nOp1 ); pInst->aErrorMsg.clear(); pInst->nErr = ERRCODE_NONE; pInst->nErl = 0; nError = ERRCODE_NONE; bInError = false; } // close channel (+channel, 0=all) void SbiRuntime::StepCLOSE( sal_uInt32 nOp1 ) { ErrCode err; if( !nOp1 ) pIosys->Shutdown(); else { err = pIosys->GetError(); if( !err ) { pIosys->Close(); } } err = pIosys->GetError(); Error( err ); } // output character (+char) void SbiRuntime::StepPRCHAR( sal_uInt32 nOp1 ) { OUString s(static_cast(nOp1)); pIosys->Write( s ); Error( pIosys->GetError() ); } // check whether TOS is a certain object class (+StringID) bool SbiRuntime::implIsClass( SbxObject const * pObj, const OUString& aClass ) { bool bRet = true; if( !aClass.isEmpty() ) { bRet = pObj->IsClass( aClass ); if( !bRet ) bRet = aClass.equalsIgnoreAsciiCase( "object" ); if( !bRet ) { const OUString& aObjClass = pObj->GetClassName(); SbModule* pClassMod = GetSbData()->pClassFac->FindClass( aObjClass ); SbClassData* pClassData; if( pClassMod && (pClassData=pClassMod->pClassData.get()) != nullptr ) { SbxVariable* pClassVar = pClassData->mxIfaces->Find( aClass, SbxClassType::DontCare ); bRet = (pClassVar != nullptr); } } } return bRet; } bool SbiRuntime::checkClass_Impl( const SbxVariableRef& refVal, const OUString& aClass, bool bRaiseErrors, bool bDefault ) { bool bOk = bDefault; SbxDataType t = refVal->GetType(); SbxVariable* pVal = refVal.get(); // we don't know the type of uno properties that are (maybevoid) if ( t == SbxEMPTY ) { if ( auto pProp = dynamic_cast( refVal.get() ) ) { t = pProp->getRealType(); } } if( t == SbxOBJECT || bVBAEnabled ) { SbxObject* pObj = dynamic_cast(pVal); if (!pObj) { pObj = dynamic_cast(refVal->GetObject()); } if( pObj ) { if( !implIsClass( pObj, aClass ) ) { SbUnoObject* pUnoObj(nullptr); if (bVBAEnabled || CodeCompleteOptions::IsExtendedTypeDeclaration()) { pUnoObj = dynamic_cast(pObj); } if (pUnoObj) bOk = checkUnoObjectType(*pUnoObj, aClass); else bOk = false; if ( !bOk && bRaiseErrors ) Error( ERRCODE_BASIC_INVALID_USAGE_OBJECT ); } else { bOk = true; SbClassModuleObject* pClassModuleObject = dynamic_cast( pObj ); if( pClassModuleObject != nullptr ) pClassModuleObject->triggerInitializeEvent(); } } } else { if( bRaiseErrors ) Error( ERRCODE_BASIC_NEEDS_OBJECT ); bOk = false; } return bOk; } void SbiRuntime::StepSETCLASS_impl( sal_uInt32 nOp1, bool bHandleDflt ) { SbxVariableRef refVal = PopVar(); SbxVariableRef refVar = PopVar(); OUString aClass( pImg->GetString( static_cast( nOp1 ) ) ); bool bOk = checkClass_Impl( refVal, aClass, true, true ); if( bOk ) { StepSET_Impl( refVal, refVar, bHandleDflt ); // don't do handle default prop for a "proper" set } } void SbiRuntime::StepVBASETCLASS( sal_uInt32 nOp1 ) { StepSETCLASS_impl( nOp1, false ); } void SbiRuntime::StepSETCLASS( sal_uInt32 nOp1 ) { StepSETCLASS_impl( nOp1, true ); } void SbiRuntime::StepTESTCLASS( sal_uInt32 nOp1 ) { SbxVariableRef xObjVal = PopVar(); OUString aClass( pImg->GetString( static_cast( nOp1 ) ) ); bool bDefault = !bVBAEnabled; bool bOk = checkClass_Impl( xObjVal, aClass, false, bDefault ); SbxVariable* pRet = new SbxVariable; pRet->PutBool( bOk ); PushVar( pRet ); } // define library for following declare-call void SbiRuntime::StepLIB( sal_uInt32 nOp1 ) { aLibName = pImg->GetString( static_cast( nOp1 ) ); } // TOS is incremented by BASE, BASE is pushed before (+BASE) // This opcode is pushed before DIM/REDIM-commands, // if there's been only one index named. void SbiRuntime::StepBASED( sal_uInt32 nOp1 ) { SbxVariable* p1 = new SbxVariable; SbxVariableRef x2 = PopVar(); // #109275 Check compatibility mode bool bCompatible = ((nOp1 & 0x8000) != 0); sal_uInt16 uBase = static_cast(nOp1 & 1); // Can only be 0 or 1 p1->PutInteger( uBase ); if( !bCompatible ) x2->Compute( SbxPLUS, *p1 ); PushVar( x2.get() ); // first the Expr PushVar( p1 ); // then the Base } // the bits in the String-ID: // 0x8000 - Argv is reserved SbxVariable* SbiRuntime::FindElement( SbxObject* pObj, sal_uInt32 nOp1, sal_uInt32 nOp2, ErrCode nNotFound, bool bLocal, bool bStatic ) { bool bIsVBAInterOp = SbiRuntime::isVBAEnabled(); if( bIsVBAInterOp ) { StarBASIC* pMSOMacroRuntimeLib = GetSbData()->pMSOMacroRuntimLib; if( pMSOMacroRuntimeLib != nullptr ) { pMSOMacroRuntimeLib->ResetFlag( SbxFlagBits::ExtSearch ); } } SbxVariable* pElem = nullptr; if( !pObj ) { Error( ERRCODE_BASIC_NO_OBJECT ); pElem = new SbxVariable; } else { bool bFatalError = false; SbxDataType t = static_cast(nOp2); OUString aName( pImg->GetString( static_cast( nOp1 & 0x7FFF ) ) ); // Hacky capture of Evaluate [] syntax // this should be tackled I feel at the pcode level if ( bIsVBAInterOp && aName.startsWith("[") ) { // emulate pcode here StepARGC(); // pseudo StepLOADSC OUString sArg = aName.copy( 1, aName.getLength() - 2 ); SbxVariable* p = new SbxVariable; p->PutString( sArg ); PushVar( p ); StepARGV(); nOp1 = nOp1 | 0x8000; // indicate params are present aName = "Evaluate"; } if( bLocal ) { if ( bStatic && pMeth ) { pElem = pMeth->GetStatics()->Find( aName, SbxClassType::DontCare ); } if ( !pElem ) { pElem = refLocals->Find( aName, SbxClassType::DontCare ); } } if( !pElem ) { bool bSave = rBasic.bNoRtl; rBasic.bNoRtl = true; pElem = pObj->Find( aName, SbxClassType::DontCare ); // #110004, #112015: Make private really private if( bLocal && pElem ) // Local as flag for global search { if( pElem->IsSet( SbxFlagBits::Private ) ) { SbiInstance* pInst_ = GetSbData()->pInst; if( pInst_ && pInst_->IsCompatibility() && pObj != pElem->GetParent() ) { pElem = nullptr; // Found but in wrong module! } // Interfaces: Use SbxFlagBits::ExtFound } } rBasic.bNoRtl = bSave; // is it a global uno-identifier? if( bLocal && !pElem ) { bool bSetName = true; // preserve normal behaviour // i#i68894# if VBAInterOp favour searching vba globals // over searching for uno classes if ( bVBAEnabled ) { // Try Find in VBA symbols space pElem = rBasic.VBAFind( aName, SbxClassType::DontCare ); if ( pElem ) { bSetName = false; // don't overwrite uno name } else { pElem = VBAConstantHelper::instance().getVBAConstant( aName ); } } if( !pElem ) { // #72382 ATTENTION! ALWAYS returns a result now // because of unknown modules! SbUnoClass* pUnoClass = findUnoClass( aName ); if( pUnoClass ) { pElem = new SbxVariable( t ); SbxValues aRes( SbxOBJECT ); aRes.pObj = pUnoClass; pElem->SbxVariable::Put( aRes ); } } // #62939 If a uno-class has been found, the wrapper // object has to be held, because the uno-class, e. g. // "stardiv", has to be read out of the registry // every time again otherwise if( pElem ) { // #63774 May not be saved too!!! pElem->SetFlag( SbxFlagBits::DontStore ); pElem->SetFlag( SbxFlagBits::NoModify); // #72382 save locally, all variables that have been declared // implicit would become global automatically otherwise! if ( bSetName ) { pElem->SetName( aName ); } refLocals->Put32( pElem, refLocals->Count32() ); } } if( !pElem ) { // not there and not in the object? // don't establish if that thing has parameters! if( nOp1 & 0x8000 ) { bFatalError = true; } // else, if there are parameters, use different error code if( !bLocal || pImg->IsFlag( SbiImageFlags::EXPLICIT ) ) { // #39108 if explicit and as ELEM always a fatal error bFatalError = true; if( !( nOp1 & 0x8000 ) && nNotFound == ERRCODE_BASIC_PROC_UNDEFINED ) { nNotFound = ERRCODE_BASIC_VAR_UNDEFINED; } } if( bFatalError ) { // #39108 use dummy variable instead of fatal error if( !xDummyVar.is() ) { xDummyVar = new SbxVariable( SbxVARIANT ); } pElem = xDummyVar.get(); ClearArgvStack(); Error( nNotFound, aName ); } else { if ( bStatic ) { pElem = StepSTATIC_Impl( aName, t, 0 ); } if ( !pElem ) { pElem = new SbxVariable( t ); if( t != SbxVARIANT ) { pElem->SetFlag( SbxFlagBits::Fixed ); } pElem->SetName( aName ); refLocals->Put32( pElem, refLocals->Count32() ); } } } } // #39108 Args can already be deleted! if( !bFatalError ) { SetupArgs( pElem, nOp1 ); } // because a particular call-type is requested if (SbxMethod* pMethod = dynamic_cast(pElem)) { // shall the type be converted? SbxDataType t2 = pElem->GetType(); bool bSet = false; if( (pElem->GetFlags() & SbxFlagBits::Fixed) == SbxFlagBits::NONE ) { if( t != SbxVARIANT && t != t2 && t >= SbxINTEGER && t <= SbxSTRING ) { pElem->SetType( t ); bSet = true; } } // assign pElem to a Ref, to delete a temp-var if applicable SbxVariableRef xDeleteRef = pElem; // remove potential rests of the last call of the SbxMethod // free Write before, so that there's no error SbxFlagBits nSavFlags = pElem->GetFlags(); pElem->SetFlag( SbxFlagBits::ReadWrite | SbxFlagBits::NoBroadcast ); pElem->SbxValue::Clear(); pElem->SetFlags( nSavFlags ); // don't touch before setting, as e. g. LEFT() // has to know the difference between Left$() and Left() // because the methods' parameters are cut away in PopVar() SbxVariable* pNew = new SbxMethod(*pMethod); //OLD: SbxVariable* pNew = new SbxVariable( *pElem ); pElem->SetParameters(nullptr); pNew->SetFlag( SbxFlagBits::ReadWrite ); if( bSet ) { pElem->SetType( t2 ); } pElem = pNew; } // consider index-access for UnoObjects // definitely we want this for VBA where properties are often // collections ( which need index access ), but lets only do // this if we actually have params following else if( bVBAEnabled && dynamic_cast( pElem) != nullptr && pElem->GetParameters() ) { SbxVariableRef xDeleteRef = pElem; // dissolve the notify while copying variable SbxVariable* pNew = new SbxVariable( *pElem ); pElem->SetParameters( nullptr ); pElem = pNew; } } return CheckArray( pElem ); } // for current scope (e. g. query from BASIC-IDE) SbxBase* SbiRuntime::FindElementExtern( const OUString& rName ) { // don't expect pMeth to be != 0, as there are none set // in the RunInit yet SbxVariable* pElem = nullptr; if( !pMod || rName.isEmpty() ) { return nullptr; } if( refLocals.is() ) { pElem = refLocals->Find( rName, SbxClassType::DontCare ); } if ( !pElem && pMeth ) { // for statics, set the method's name in front OUString aMethName = pMeth->GetName() + ":" + rName; pElem = pMod->Find(aMethName, SbxClassType::DontCare); } // search in parameter list if( !pElem && pMeth ) { SbxInfo* pInfo = pMeth->GetInfo(); if( pInfo && refParams.is() ) { sal_uInt32 nParamCount = refParams->Count32(); assert(nParamCount <= std::numeric_limits::max()); sal_uInt16 j = 1; const SbxParamInfo* pParam = pInfo->GetParam( j ); while( pParam ) { if( pParam->aName.equalsIgnoreAsciiCase( rName ) ) { if( j >= nParamCount ) { // Parameter is missing pElem = new SbxVariable( SbxSTRING ); pElem->PutString( ""); } else { pElem = refParams->Get32( j ); } break; } pParam = pInfo->GetParam( ++j ); } } } // search in module if( !pElem ) { bool bSave = rBasic.bNoRtl; rBasic.bNoRtl = true; pElem = pMod->Find( rName, SbxClassType::DontCare ); rBasic.bNoRtl = bSave; } return pElem; } void SbiRuntime::SetupArgs( SbxVariable* p, sal_uInt32 nOp1 ) { if( nOp1 & 0x8000 ) { if( !refArgv.is() ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } bool bHasNamed = false; sal_uInt32 i; sal_uInt32 nArgCount = refArgv->Count32(); for( i = 1 ; i < nArgCount ; i++ ) { if( !refArgv->GetAlias32(i).isEmpty() ) { bHasNamed = true; break; } } if( bHasNamed ) { SbxInfo* pInfo = p->GetInfo(); if( !pInfo ) { bool bError_ = true; SbUnoMethod* pUnoMethod = dynamic_cast( p ); SbUnoProperty* pUnoProperty = dynamic_cast( p ); if( pUnoMethod || pUnoProperty ) { SbUnoObject* pParentUnoObj = dynamic_cast( p->GetParent() ); if( pParentUnoObj ) { Any aUnoAny = pParentUnoObj->getUnoAny(); Reference< XInvocation > xInvocation; aUnoAny >>= xInvocation; if( xInvocation.is() ) // TODO: if( xOLEAutomation.is() ) { bError_ = false; sal_uInt32 nCurPar = 1; AutomationNamedArgsSbxArray* pArg = new AutomationNamedArgsSbxArray( nArgCount ); OUString* pNames = pArg->getNames().getArray(); for( i = 1 ; i < nArgCount ; i++ ) { SbxVariable* pVar = refArgv->Get32( i ); OUString aName = refArgv->GetAlias32(i); if (!aName.isEmpty()) { pNames[i] = aName; } pArg->Put32( pVar, nCurPar++ ); } refArgv = pArg; } } } else if( bVBAEnabled && p->GetType() == SbxOBJECT && (dynamic_cast( p) == nullptr || !p->IsBroadcaster()) ) { // Check for default method with named parameters SbxBaseRef xObj = p->GetObject(); if (SbUnoObject* pUnoObj = dynamic_cast( xObj.get() )) { Any aAny = pUnoObj->getUnoAny(); if( aAny.getValueType().getTypeClass() == TypeClass_INTERFACE ) { Reference< XDefaultMethod > xDfltMethod( aAny, UNO_QUERY ); OUString sDefaultMethod; if ( xDfltMethod.is() ) { sDefaultMethod = xDfltMethod->getDefaultMethodName(); } if ( !sDefaultMethod.isEmpty() ) { SbxVariable* meth = pUnoObj->Find( sDefaultMethod, SbxClassType::Method ); if( meth != nullptr ) { pInfo = meth->GetInfo(); } if( pInfo ) { bError_ = false; } } } } } if( bError_ ) { Error( ERRCODE_BASIC_NO_NAMED_ARGS ); } } else { sal_uInt32 nCurPar = 1; SbxArray* pArg = new SbxArray; for( i = 1 ; i < nArgCount ; i++ ) { SbxVariable* pVar = refArgv->Get32( i ); OUString aName = refArgv->GetAlias32(i); if (!aName.isEmpty()) { // nCurPar is set to the found parameter sal_uInt16 j = 1; const SbxParamInfo* pParam = pInfo->GetParam( j ); while( pParam ) { if( pParam->aName.equalsIgnoreAsciiCase( aName ) ) { nCurPar = j; break; } pParam = pInfo->GetParam( ++j ); } if( !pParam ) { Error( ERRCODE_BASIC_NAMED_NOT_FOUND ); break; } } pArg->Put32( pVar, nCurPar++ ); } refArgv = pArg; } } // own var as parameter 0 refArgv->Put32( p, 0 ); p->SetParameters( refArgv.get() ); PopArgv(); } else { p->SetParameters( nullptr ); } } // getting an array element SbxVariable* SbiRuntime::CheckArray( SbxVariable* pElem ) { SbxArray* pPar; if( ( pElem->GetType() & SbxARRAY ) && refRedim.get() != pElem ) { SbxBase* pElemObj = pElem->GetObject(); SbxDimArray* pDimArray = dynamic_cast( pElemObj ); pPar = pElem->GetParameters(); if( pDimArray ) { // parameters may be missing, if an array is // passed as an argument if( pPar ) pElem = pDimArray->Get( pPar ); } else { SbxArray* pArray = dynamic_cast( pElemObj ); if( pArray ) { if( !pPar ) { Error( ERRCODE_BASIC_OUT_OF_RANGE ); pElem = new SbxVariable; } else { pElem = pArray->Get32( pPar->Get32( 1 )->GetInteger() ); } } } // #42940, set parameter 0 to NULL so that var doesn't contain itself if( pPar ) { pPar->Put32( nullptr, 0 ); } } // consider index-access for UnoObjects else if( pElem->GetType() == SbxOBJECT && dynamic_cast( pElem) == nullptr && ( !bVBAEnabled || dynamic_cast( pElem) == nullptr ) ) { pPar = pElem->GetParameters(); if ( pPar ) { // is it a uno-object? SbxBaseRef pObj = pElem->GetObject(); if( pObj.is() ) { if (SbUnoObject* pUnoObj = dynamic_cast( pObj.get())) { Any aAny = pUnoObj->getUnoAny(); if( aAny.getValueType().getTypeClass() == TypeClass_INTERFACE ) { Reference< XIndexAccess > xIndexAccess( aAny, UNO_QUERY ); if ( !bVBAEnabled ) { if( xIndexAccess.is() ) { sal_uInt32 nParamCount = pPar->Count32() - 1; if( nParamCount != 1 ) { StarBASIC::Error( ERRCODE_BASIC_BAD_ARGUMENT ); return pElem; } // get index sal_Int32 nIndex = pPar->Get32( 1 )->GetLong(); Reference< XInterface > xRet; try { Any aAny2 = xIndexAccess->getByIndex( nIndex ); aAny2 >>= xRet; } catch (const IndexOutOfBoundsException&) { // usually expect converting problem StarBASIC::Error( ERRCODE_BASIC_OUT_OF_RANGE ); } // #57847 always create a new variable, else error // due to PutObject(NULL) at ReadOnly-properties pElem = new SbxVariable( SbxVARIANT ); if( xRet.is() ) { aAny <<= xRet; // #67173 don't specify a name so that the real class name is entered SbxObjectRef xWrapper = static_cast(new SbUnoObject( OUString(), aAny )); pElem->PutObject( xWrapper.get() ); } else { pElem->PutObject( nullptr ); } } } else { // check if there isn't a default member between the current variable // and the params, e.g. // Dim rst1 As New ADODB.Recordset // " // val = rst1("FirstName") // has the default 'Fields' member between rst1 and '("FirstName")' Any x = aAny; SbxVariable* pDflt = getDefaultProp( pElem ); if ( pDflt ) { pDflt->Broadcast( SfxHintId::BasicDataWanted ); SbxBaseRef pDfltObj = pDflt->GetObject(); if( pDfltObj.is() ) { if (SbUnoObject* pSbObj = dynamic_cast(pDfltObj.get())) { pUnoObj = pSbObj; Any aUnoAny = pUnoObj->getUnoAny(); if( aUnoAny.getValueType().getTypeClass() == TypeClass_INTERFACE ) x = aUnoAny; pElem = pDflt; } } } OUString sDefaultMethod; Reference< XDefaultMethod > xDfltMethod( x, UNO_QUERY ); if ( xDfltMethod.is() ) { sDefaultMethod = xDfltMethod->getDefaultMethodName(); } else if( xIndexAccess.is() ) { sDefaultMethod = "getByIndex"; } if ( !sDefaultMethod.isEmpty() ) { SbxVariable* meth = pUnoObj->Find( sDefaultMethod, SbxClassType::Method ); SbxVariableRef refTemp = meth; if ( refTemp.is() ) { meth->SetParameters( pPar ); SbxVariable* pNew = new SbxMethod( *static_cast(meth) ); pElem = pNew; } } } } // #42940, set parameter 0 to NULL so that var doesn't contain itself pPar->Put32( nullptr, 0 ); } else if (BasicCollection* pCol = dynamic_cast(pObj.get())) { pElem = new SbxVariable( SbxVARIANT ); pPar->Put32( pElem, 0 ); pCol->CollItem( pPar ); } } else if( bVBAEnabled ) // !pObj { SbxArray* pParam = pElem->GetParameters(); if( pParam != nullptr && !pElem->IsSet( SbxFlagBits::VarToDim ) ) { Error( ERRCODE_BASIC_NO_OBJECT ); } } } } return pElem; } // loading an element from the runtime-library (+StringID+type) void SbiRuntime::StepRTL( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { PushVar( FindElement( rBasic.pRtl.get(), nOp1, nOp2, ERRCODE_BASIC_PROC_UNDEFINED, false ) ); } void SbiRuntime::StepFIND_Impl( SbxObject* pObj, sal_uInt32 nOp1, sal_uInt32 nOp2, ErrCode nNotFound, bool bStatic ) { if( !refLocals.is() ) { refLocals = new SbxArray; } PushVar( FindElement( pObj, nOp1, nOp2, nNotFound, true/*bLocal*/, bStatic ) ); } // loading a local/global variable (+StringID+type) void SbiRuntime::StepFIND( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { StepFIND_Impl( pMod, nOp1, nOp2, ERRCODE_BASIC_PROC_UNDEFINED ); } // Search inside a class module (CM) to enable global search in time void SbiRuntime::StepFIND_CM( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { SbClassModuleObject* pClassModuleObject = dynamic_cast( pMod ); if( pClassModuleObject ) { pMod->SetFlag( SbxFlagBits::GlobalSearch ); } StepFIND_Impl( pMod, nOp1, nOp2, ERRCODE_BASIC_PROC_UNDEFINED); if( pClassModuleObject ) { pMod->ResetFlag( SbxFlagBits::GlobalSearch ); } } void SbiRuntime::StepFIND_STATIC( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { StepFIND_Impl( pMod, nOp1, nOp2, ERRCODE_BASIC_PROC_UNDEFINED, true ); } // loading an object-element (+StringID+type) // the object lies on TOS void SbiRuntime::StepELEM( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { SbxVariableRef pObjVar = PopVar(); SbxObject* pObj = dynamic_cast( pObjVar.get() ); if( !pObj ) { SbxBase* pObjVarObj = pObjVar->GetObject(); pObj = dynamic_cast( pObjVarObj ); } // #56368 save reference at StepElem, otherwise objects could // lose their reference too early in qualification chains like // ActiveComponent.Selection(0).Text // #74254 now per list if( pObj ) { aRefSaved.emplace_back(pObj ); } PushVar( FindElement( pObj, nOp1, nOp2, ERRCODE_BASIC_NO_METHOD, false ) ); } /** Loading of a parameter (+offset+type) If the data type is wrong, create a copy and search for optionals including the default value. The data type SbxEMPTY shows that no parameters are given. Get( 0 ) may be EMPTY @param nOp1 the index of the current parameter being processed, where the entry of the index 0 is for the return value. @param nOp2 the data type of the parameter. */ void SbiRuntime::StepPARAM( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { sal_uInt16 nIdx = static_cast( nOp1 & 0x7FFF ); SbxDataType eType = static_cast(nOp2); SbxVariable* pVar; // #57915 solve missing in a cleaner way sal_uInt32 nParamCount = refParams->Count32(); if( nIdx >= nParamCount ) { sal_uInt16 iLoop = nIdx; while( iLoop >= nParamCount ) { pVar = new SbxVariable(); pVar->PutErr( 448 ); // like in VB: Error-Code 448 (ERRCODE_BASIC_NAMED_NOT_FOUND) // tdf#79426, tdf#125180 - add additional information about a missing parameter SetIsMissing( pVar ); refParams->Put32( pVar, iLoop ); iLoop--; } } pVar = refParams->Get32( nIdx ); // tdf#79426, tdf#125180 - check for optionals only if the parameter is actually missing if( pVar->GetType() == SbxERROR && IsMissing( pVar, 1 ) && nIdx ) { // if there's a parameter missing, it can be OPTIONAL bool bOpt = false; if( pMeth ) { SbxInfo* pInfo = pMeth->GetInfo(); if ( pInfo ) { const SbxParamInfo* pParam = pInfo->GetParam( nIdx ); if( pParam && ( pParam->nFlags & SbxFlagBits::Optional ) ) { // Default value? sal_uInt16 nDefaultId = static_cast(pParam->nUserData & 0x0ffff); if( nDefaultId > 0 ) { OUString aDefaultStr = pImg->GetString( nDefaultId ); pVar = new SbxVariable(pParam-> eType); pVar->PutString( aDefaultStr ); refParams->Put32( pVar, nIdx ); } else if ( SbiRuntime::isVBAEnabled() && eType != SbxVARIANT ) { // tdf#36737 - initialize the parameter with the default value of its type pVar = new SbxVariable( pParam->eType ); refParams->Put32( pVar, nIdx ); } bOpt = true; } } } if( !bOpt ) { Error( ERRCODE_BASIC_NOT_OPTIONAL ); } } else if( eType != SbxVARIANT && static_cast(pVar->GetType() & 0x0FFF ) != eType ) { SbxVariable* q = new SbxVariable( eType ); aRefSaved.emplace_back(q ); *q = *pVar; pVar = q; if ( nIdx ) { refParams->Put32( pVar, nIdx ); } } SetupArgs( pVar, nOp1 ); PushVar( CheckArray( pVar ) ); } // Case-Test (+True-Target+Test-Opcode) void SbiRuntime::StepCASEIS( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { if( !refCaseStk.is() || !refCaseStk->Count32() ) { StarBASIC::FatalError( ERRCODE_BASIC_INTERNAL_ERROR ); } else { SbxVariableRef xComp = PopVar(); SbxVariableRef xCase = refCaseStk->Get32( refCaseStk->Count32() - 1 ); if( xCase->Compare( static_cast(nOp2), *xComp ) ) { StepJUMP( nOp1 ); } } } // call of a DLL-procedure (+StringID+type) // the StringID's MSB shows that Argv is occupied void SbiRuntime::StepCALL( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { OUString aName = pImg->GetString( static_cast( nOp1 & 0x7FFF ) ); SbxArray* pArgs = nullptr; if( nOp1 & 0x8000 ) { pArgs = refArgv.get(); } DllCall( aName, aLibName, pArgs, static_cast(nOp2), false ); aLibName.clear(); if( nOp1 & 0x8000 ) { PopArgv(); } } // call of a DLL-procedure after CDecl (+StringID+type) void SbiRuntime::StepCALLC( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { OUString aName = pImg->GetString( static_cast( nOp1 & 0x7FFF ) ); SbxArray* pArgs = nullptr; if( nOp1 & 0x8000 ) { pArgs = refArgv.get(); } DllCall( aName, aLibName, pArgs, static_cast(nOp2), true ); aLibName.clear(); if( nOp1 & 0x8000 ) { PopArgv(); } } // beginning of a statement (+Line+Col) void SbiRuntime::StepSTMNT( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { // If the Expr-Stack at the beginning of a statement contains a variable, // some fool has called X as a function, although it's a variable! bool bFatalExpr = false; OUString sUnknownMethodName; if( nExprLvl > 1 ) { bFatalExpr = true; } else if( nExprLvl ) { SbxVariable* p = refExprStk->Get32( 0 ); if( p->GetRefCount() > 1 && refLocals.is() && refLocals->Find( p->GetName(), p->GetClass() ) ) { sUnknownMethodName = p->GetName(); bFatalExpr = true; } } ClearExprStack(); aRefSaved.clear(); // We have to cancel hard here because line and column // would be wrong later otherwise! if( bFatalExpr) { StarBASIC::FatalError( ERRCODE_BASIC_NO_METHOD, sUnknownMethodName ); return; } pStmnt = pCode - 9; sal_uInt16 nOld = nLine; nLine = static_cast( nOp1 ); // #29955 & 0xFF, to filter out for-loop-level nCol1 = static_cast( nOp2 & 0xFF ); // find the next STMNT-command to set the final column // of this statement nCol2 = 0xffff; sal_uInt16 n1, n2; const sal_uInt8* p = pMod->FindNextStmnt( pCode, n1, n2 ); if( p ) { if( n1 == nOp1 ) { // #29955 & 0xFF, to filter out for-loop-level nCol2 = (n2 & 0xFF) - 1; } } // #29955 correct for-loop-level, #67452 NOT in the error-handler if( !bInError ) { // (there's a difference here in case of a jump out of a loop) sal_uInt16 nExspectedForLevel = static_cast( nOp2 / 0x100 ); if( !pGosubStk.empty() ) { nExspectedForLevel = nExspectedForLevel + pGosubStk.back().nStartForLvl; } // if the actual for-level is too small it'd jump out // of a loop -> corrected while( nForLvl > nExspectedForLevel ) { PopFor(); } } // 16.10.96: #31460 new concept for StepInto/Over/Out // see explanation at _ImplGetBreakCallLevel if( pInst->nCallLvl <= pInst->nBreakCallLvl ) { StarBASIC* pStepBasic = GetCurrentBasic( &rBasic ); BasicDebugFlags nNewFlags = pStepBasic->StepPoint( nLine, nCol1, nCol2 ); pInst->CalcBreakCallLevel( nNewFlags ); } // break points only at STMNT-commands in a new line! else if( ( nOp1 != nOld ) && ( nFlags & BasicDebugFlags::Break ) && pMod->IsBP( static_cast( nOp1 ) ) ) { StarBASIC* pBreakBasic = GetCurrentBasic( &rBasic ); BasicDebugFlags nNewFlags = pBreakBasic->BreakPoint( nLine, nCol1, nCol2 ); pInst->CalcBreakCallLevel( nNewFlags ); } } // (+StreamMode+Flags) // Stack: block length // channel number // file name void SbiRuntime::StepOPEN( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { SbxVariableRef pName = PopVar(); SbxVariableRef pChan = PopVar(); SbxVariableRef pLen = PopVar(); short nBlkLen = pLen->GetInteger(); short nChan = pChan->GetInteger(); OString aName(OUStringToOString(pName->GetOUString(), osl_getThreadTextEncoding())); pIosys->Open( nChan, aName, static_cast( nOp1 ), static_cast( nOp2 ), nBlkLen ); Error( pIosys->GetError() ); } // create object (+StringID+StringID) void SbiRuntime::StepCREATE( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { OUString aClass( pImg->GetString( static_cast( nOp2 ) ) ); SbxObject *pObj = SbxBase::CreateObject( aClass ); if( !pObj ) { Error( ERRCODE_BASIC_INVALID_OBJECT ); } else { OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); pObj->SetName( aName ); // the object must be able to call the BASIC pObj->SetParent( &rBasic ); SbxVariable* pNew = new SbxVariable; pNew->PutObject( pObj ); PushVar( pNew ); } } void SbiRuntime::StepDCREATE( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { StepDCREATE_IMPL( nOp1, nOp2 ); } void SbiRuntime::StepDCREATE_REDIMP( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { StepDCREATE_IMPL( nOp1, nOp2 ); } // #56204 create object array (+StringID+StringID), DCREATE == Dim-Create void SbiRuntime::StepDCREATE_IMPL( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { SbxVariableRef refVar = PopVar(); DimImpl( refVar ); // fill the array with instances of the requested class SbxBase* pObj = refVar->GetObject(); if (!pObj) { StarBASIC::Error( ERRCODE_BASIC_INVALID_OBJECT ); return; } if (SbxDimArray* pArray = dynamic_cast(pObj)) { const sal_Int32 nDims = pArray->GetDims32(); sal_Int32 nTotalSize = nDims > 0 ? 1 : 0; // must be a one-dimensional array sal_Int32 nLower, nUpper; for( sal_Int32 i = 0 ; i < nDims ; ++i ) { pArray->GetDim32( i+1, nLower, nUpper ); const sal_Int32 nSize = nUpper - nLower + 1; nTotalSize *= nSize; } // Optimization: pre-allocate underlying container if (nTotalSize > 0) pArray->SbxArray::GetRef32(nTotalSize - 1); // First, fill those parts of the array that are preserved bool bWasError = false; const bool bRestored = implRestorePreservedArray(pArray, refRedimpArray, &bWasError); if (bWasError) nTotalSize = 0; // on error, don't create objects // create objects and insert them into the array OUString aClass( pImg->GetString( static_cast( nOp2 ) ) ); OUString aName; for( sal_Int32 i = 0 ; i < nTotalSize ; ++i ) { if (!bRestored || !pArray->SbxArray::GetRef32(i)) // For those left unset after preserve { SbxObject* pClassObj = SbxBase::CreateObject(aClass); if (!pClassObj) { Error(ERRCODE_BASIC_INVALID_OBJECT); break; } else { if (aName.isEmpty()) aName = pImg->GetString(static_cast(nOp1)); pClassObj->SetName(aName); // the object must be able to call the basic pClassObj->SetParent(&rBasic); pArray->SbxArray::Put32(pClassObj, i); } } } } } void SbiRuntime::StepTCREATE( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); OUString aClass( pImg->GetString( static_cast( nOp2 ) ) ); SbxObject* pCopyObj = createUserTypeImpl( aClass ); if( pCopyObj ) { pCopyObj->SetName( aName ); } SbxVariable* pNew = new SbxVariable; pNew->PutObject( pCopyObj ); pNew->SetDeclareClassName( aClass ); PushVar( pNew ); } void SbiRuntime::implHandleSbxFlags( SbxVariable* pVar, SbxDataType t, sal_uInt32 nOp2 ) { bool bWithEvents = ((t & 0xff) == SbxOBJECT && (nOp2 & SBX_TYPE_WITH_EVENTS_FLAG) != 0); if( bWithEvents ) { pVar->SetFlag( SbxFlagBits::WithEvents ); } bool bDimAsNew = ((nOp2 & SBX_TYPE_DIM_AS_NEW_FLAG) != 0); if( bDimAsNew ) { pVar->SetFlag( SbxFlagBits::DimAsNew ); } bool bFixedString = ((t & 0xff) == SbxSTRING && (nOp2 & SBX_FIXED_LEN_STRING_FLAG) != 0); if( bFixedString ) { sal_uInt16 nCount = static_cast( nOp2 >> 17 ); // len = all bits above 0x10000 OUStringBuffer aBuf; comphelper::string::padToLength(aBuf, nCount); pVar->PutString(aBuf.makeStringAndClear()); } bool bVarToDim = ((nOp2 & SBX_TYPE_VAR_TO_DIM_FLAG) != 0); if( bVarToDim ) { pVar->SetFlag( SbxFlagBits::VarToDim ); } } // establishing a local variable (+StringID+type) void SbiRuntime::StepLOCAL( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { if( !refLocals.is() ) { refLocals = new SbxArray; } OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); if( refLocals->Find( aName, SbxClassType::DontCare ) == nullptr ) { SbxDataType t = static_cast(nOp2 & 0xffff); SbxVariable* p = new SbxVariable( t ); p->SetName( aName ); implHandleSbxFlags( p, t, nOp2 ); refLocals->Put32( p, refLocals->Count32() ); } } // establishing a module-global variable (+StringID+type) void SbiRuntime::StepPUBLIC_Impl( sal_uInt32 nOp1, sal_uInt32 nOp2, bool bUsedForClassModule ) { OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); SbxDataType t = static_cast(nOp2 & 0xffff); bool bFlag = pMod->IsSet( SbxFlagBits::NoModify ); pMod->SetFlag( SbxFlagBits::NoModify ); SbxVariableRef p = pMod->Find( aName, SbxClassType::Property ); if( p.is() ) { pMod->Remove (p.get()); } SbProperty* pProp = pMod->GetProperty( aName, t ); if( !bUsedForClassModule ) { pProp->SetFlag( SbxFlagBits::Private ); } if( !bFlag ) { pMod->ResetFlag( SbxFlagBits::NoModify ); } if( pProp ) { pProp->SetFlag( SbxFlagBits::DontStore ); // from 2.7.1996: HACK because of 'reference can't be saved' pProp->SetFlag( SbxFlagBits::NoModify); implHandleSbxFlags( pProp, t, nOp2 ); } } void SbiRuntime::StepPUBLIC( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { StepPUBLIC_Impl( nOp1, nOp2, false ); } void SbiRuntime::StepPUBLIC_P( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { // Creates module variable that isn't reinitialised when // between invocations ( for VBASupport & document basic only ) if( pMod->pImage->bFirstInit ) { bool bUsedForClassModule = pImg->IsFlag( SbiImageFlags::CLASSMODULE ); StepPUBLIC_Impl( nOp1, nOp2, bUsedForClassModule ); } } // establishing a global variable (+StringID+type) void SbiRuntime::StepGLOBAL( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { if( pImg->IsFlag( SbiImageFlags::CLASSMODULE ) ) { StepPUBLIC_Impl( nOp1, nOp2, true ); } OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); SbxDataType t = static_cast(nOp2 & 0xffff); // Store module scope variables at module scope // in non vba mode these are stored at the library level :/ // not sure if this really should not be enabled for ALL basic SbxObject* pStorage = &rBasic; if ( SbiRuntime::isVBAEnabled() ) { pStorage = pMod; pMod->AddVarName( aName ); } bool bFlag = pStorage->IsSet( SbxFlagBits::NoModify ); rBasic.SetFlag( SbxFlagBits::NoModify ); SbxVariableRef p = pStorage->Find( aName, SbxClassType::Property ); if( p.is() ) { pStorage->Remove (p.get()); } p = pStorage->Make( aName, SbxClassType::Property, t ); if( !bFlag ) { pStorage->ResetFlag( SbxFlagBits::NoModify ); } if( p.is() ) { p->SetFlag( SbxFlagBits::DontStore ); // from 2.7.1996: HACK because of 'reference can't be saved' p->SetFlag( SbxFlagBits::NoModify); } } // Creates global variable that isn't reinitialised when // basic is restarted, P=PERSIST (+StringID+Typ) void SbiRuntime::StepGLOBAL_P( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { if( pMod->pImage->bFirstInit ) { StepGLOBAL( nOp1, nOp2 ); } } // Searches for global variable, behavior depends on the fact // if the variable is initialised for the first time void SbiRuntime::StepFIND_G( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { if( pMod->pImage->bFirstInit ) { // Behave like always during first init StepFIND( nOp1, nOp2 ); } else { // Return dummy variable SbxDataType t = static_cast(nOp2); OUString aName( pImg->GetString( static_cast( nOp1 & 0x7FFF ) ) ); SbxVariable* pDummyVar = new SbxVariable( t ); pDummyVar->SetName( aName ); PushVar( pDummyVar ); } } SbxVariable* SbiRuntime::StepSTATIC_Impl( OUString const & aName, SbxDataType t, sal_uInt32 nOp2 ) { SbxVariable* p = nullptr; if ( pMeth ) { SbxArray* pStatics = pMeth->GetStatics(); if( pStatics && ( pStatics->Find( aName, SbxClassType::DontCare ) == nullptr ) ) { p = new SbxVariable( t ); if( t != SbxVARIANT ) { p->SetFlag( SbxFlagBits::Fixed ); } p->SetName( aName ); implHandleSbxFlags( p, t, nOp2 ); pStatics->Put32( p, pStatics->Count32() ); } } return p; } // establishing a static variable (+StringID+type) void SbiRuntime::StepSTATIC( sal_uInt32 nOp1, sal_uInt32 nOp2 ) { OUString aName( pImg->GetString( static_cast( nOp1 ) ) ); SbxDataType t = static_cast(nOp2 & 0xffff); StepSTATIC_Impl( aName, t, nOp2 ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */