/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include "ChartView.hxx" #include "chartview/DrawModelWrapper.hxx" #include "NumberFormatterWrapper.hxx" #include "ViewDefines.hxx" #include "VDiagram.hxx" #include "VTitle.hxx" #include "AbstractShapeFactory.hxx" #include "VCoordinateSystem.hxx" #include "VSeriesPlotter.hxx" #include "CommonConverters.hxx" #include "macros.hxx" #include "TitleHelper.hxx" #include "LegendHelper.hxx" #include "VLegend.hxx" #include "PropertyMapper.hxx" #include "ChartModelHelper.hxx" #include "ChartTypeHelper.hxx" #include "ScaleAutomatism.hxx" #include "MinimumAndMaximumSupplier.hxx" #include "ObjectIdentifier.hxx" #include "DiagramHelper.hxx" #include "RelativePositionHelper.hxx" #include "servicenames.hxx" #include "AxisHelper.hxx" #include "AxisIndexDefines.hxx" #include "ControllerLockGuard.hxx" #include "BaseGFXHelper.hxx" #include "DataSeriesHelper.hxx" #include "DateHelper.hxx" #include "defines.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "servicenames_charttypes.hxx" #include #include #include #include #include #include namespace chart { using namespace ::com::sun::star; using namespace ::com::sun::star::chart2; using ::com::sun::star::uno::Reference; using ::com::sun::star::uno::Sequence; using ::com::sun::star::uno::Any; namespace { class theExplicitValueProviderUnoTunnelId : public rtl::Static {}; typedef std::pair< sal_Int32, sal_Int32 > tFullAxisIndex; //first index is the dimension, second index is the axis index that indicates whether this is a main or secondary axis typedef std::map< VCoordinateSystem*, tFullAxisIndex > tCoordinateSystemMap; /** This class handles a collection of coordinate systems and is used for * executing some action on all coordinate systems such as * `prepareAutomaticAxisScaling` and `setExplicitScaleAndIncrement`. * Moreover it contains the `aAutoScaling` object that is an instance of * the `ScaleAutomatism` class. The initialization of `aAutoScaling` is * performed in the `SeriesPlotterContainer::initAxisUsageList` method and is * used in the `SeriesPlotterContainer::doAutoScaling` for calculating explicit * scale and increment objects (see `SeriesPlotterContainer::doAutoScaling`). */ struct AxisUsage { AxisUsage(); ~AxisUsage(); void addCoordinateSystem( VCoordinateSystem* pCooSys, sal_Int32 nDimensionIndex, sal_Int32 nAxisIndex ); ::std::vector< VCoordinateSystem* > getCoordinateSystems( sal_Int32 nDimensionIndex, sal_Int32 nAxisIndex ); sal_Int32 getMaxAxisIndexForDimension( sal_Int32 nDimensionIndex ); void prepareAutomaticAxisScaling( ScaleAutomatism& rScaleAutomatism, sal_Int32 nDimIndex, sal_Int32 nAxisIndex ); void setExplicitScaleAndIncrement( sal_Int32 nDimIndex, sal_Int32 nAxisIndex, const ExplicitScaleData& rScale, const ExplicitIncrementData& rInc ); ScaleAutomatism aAutoScaling; private: tCoordinateSystemMap aCoordinateSystems; std::map< sal_Int32, sal_Int32 > aMaxIndexPerDimension; }; AxisUsage::AxisUsage() : aAutoScaling(AxisHelper::createDefaultScale(), Date(Date::SYSTEM)) { } AxisUsage::~AxisUsage() { aCoordinateSystems.clear(); } void AxisUsage::addCoordinateSystem( VCoordinateSystem* pCooSys, sal_Int32 nDimensionIndex, sal_Int32 nAxisIndex ) { if(!pCooSys) return; tFullAxisIndex aFullAxisIndex( nDimensionIndex, nAxisIndex ); tCoordinateSystemMap::const_iterator aFound( aCoordinateSystems.find(pCooSys) ); //use one scale only once for each coordinate system //main axis are preferred over secondary axis //value scales are preferred if(aFound!=aCoordinateSystems.end()) { sal_Int32 nFoundAxisIndex = aFound->second.second; if( nFoundAxisIndex < nAxisIndex ) return; sal_Int32 nFoundDimension = aFound->second.first; if( nFoundDimension ==1 ) return; if( nFoundDimension < nDimensionIndex ) return; } aCoordinateSystems[pCooSys] = aFullAxisIndex; //set maximum scale index std::map< sal_Int32, sal_Int32 >::const_iterator aIter = aMaxIndexPerDimension.find(nDimensionIndex); if( aIter != aMaxIndexPerDimension.end() ) { sal_Int32 nCurrentMaxIndex = aIter->second; if( nCurrentMaxIndex < nAxisIndex ) aMaxIndexPerDimension[nDimensionIndex]=nAxisIndex; } else aMaxIndexPerDimension[nDimensionIndex]=nAxisIndex; } ::std::vector< VCoordinateSystem* > AxisUsage::getCoordinateSystems( sal_Int32 nDimensionIndex, sal_Int32 nAxisIndex ) { ::std::vector< VCoordinateSystem* > aRet; tCoordinateSystemMap::const_iterator aIter; for( aIter = aCoordinateSystems.begin(); aIter!=aCoordinateSystems.end();++aIter ) { if( aIter->second.first != nDimensionIndex ) continue; if( aIter->second.second != nAxisIndex ) continue; aRet.push_back( aIter->first ); } return aRet; } sal_Int32 AxisUsage::getMaxAxisIndexForDimension( sal_Int32 nDimensionIndex ) { sal_Int32 nRet = -1; std::map< sal_Int32, sal_Int32 >::const_iterator aIter = aMaxIndexPerDimension.find(nDimensionIndex); if( aIter != aMaxIndexPerDimension.end() ) nRet = aIter->second; return nRet; } void AxisUsage::prepareAutomaticAxisScaling( ScaleAutomatism& rScaleAutomatism, sal_Int32 nDimIndex, sal_Int32 nAxisIndex ) { std::vector aVCooSysList = getCoordinateSystems(nDimIndex, nAxisIndex); for (size_t i = 0, n = aVCooSysList.size(); i < n; ++i) aVCooSysList[i]->prepareAutomaticAxisScaling(rScaleAutomatism, nDimIndex, nAxisIndex); } void AxisUsage::setExplicitScaleAndIncrement( sal_Int32 nDimIndex, sal_Int32 nAxisIndex, const ExplicitScaleData& rScale, const ExplicitIncrementData& rInc ) { std::vector aVCooSysList = getCoordinateSystems(nDimIndex, nAxisIndex); for (size_t i = 0, n = aVCooSysList.size(); i < n; ++i) aVCooSysList[i]->setExplicitScaleAndIncrement(nDimIndex, nAxisIndex, rScale, rInc); } typedef boost::ptr_vector SeriesPlottersType; /** This class is a container of `SeriesPlotter` objects (such as `PieChart` * instances). It is used for initializing coordinate systems, axes and scales * of all series plotters which belongs to the container. */ class SeriesPlotterContainer { public: SeriesPlotterContainer( std::vector< VCoordinateSystem* >& rVCooSysList ); ~SeriesPlotterContainer(); /** It is used to set coordinate systems (`m_rVCooSysList`), this method * is invoked by `ChartView::createShapes2D` before of * `ChartView::impl_createDiagramAndContent`. * Coordinate systems are retrieved through the `XCoordinateSystemContainer` * interface implemented by a diagram object which is provided by the * `ChartModel` object passed to the method (`rChartModel.getFirstDiagram()`). * * It is used for creating series plotters and appending them * to `m_aSeriesPlotterList`. The created series plotters are initialized * through data (number formats supplier, color scheme, data series), * extracted from the chart model or the diagram objects. An exception is * the explicit category provider that is retrieved through the * `VCoordinateSystem` object used by the series plotter. * * It sets the minimum-maximum supplier for a coordinate system: * this supplier is the series plotter itself which utilizes the given * coordinate system. In fact `VSeriesPlotter` has `MinimumMaximumSupplier` * as one of its base classes. * Hence, for instance, a `PieChart`, which is a series plotter, is * a `MinimumMaximumSupplier`, too. */ void initializeCooSysAndSeriesPlotter( ChartModel& rModel ); /** This method is invoked by `ChartView::impl_createDiagramAndContent`. * It iterates on every axis of every coordinate systems, and if the axis * is not yet present in `m_aAxisUsageList` it creates a new `AxisUsage` * object and initialize its `aAutoScaling` member to the `ScaleData` * object of the current axis. */ void initAxisUsageList(const Date& rNullDate); /** * Perform automatic axis scaling and determine the amount and spacing of * increments. It assumes that the caller has determined the size of the * largest axis label text object prior to calling this method. * * The new axis scaling data will be stored in the VCoordinateSystem * objects. The label alignment direction for each axis will also get * determined during this process, and stored in VAxis. * * This method is invoked by `ChartView::impl_createDiagramAndContent` * soon after `initAxisUsageList`. * It initializes explicit scale and increment objects for all coordinate * systems in `m_rVCooSysList`. * This action is achieved by iterating on the `m_aAxisUsageList` container, * and performing 3 steps: * 1- call `VCoordinateSystem::prepareAutomaticAxisScaling` for setting * scaling parameters of the `aAutoScaling` member (a `ScaleAutomatism` * object) for the current `AxisUsage` instance * (see `VCoordinateSystem::prepareAutomaticAxisScaling`); * 2- calculate the explicit scale and increment objects * (see ScaleAutomatism::calculateExplicitScaleAndIncrement); * 3- set the explicit scale and increment objects for each coordinate * system. */ void doAutoScaling( ChartModel& rModel ); /** * After auto-scaling is performed, call this method to set the explicit * scaling and increment data to all relevant VAxis objects. */ void updateScalesAndIncrementsOnAxes(); /** * After auto-scaling is performed, call this method to set the explicit * scaling data to all the plotters. */ void setScalesFromCooSysToPlotter(); void setNumberFormatsFromAxes(); drawing::Direction3D getPreferredAspectRatio(); SeriesPlottersType& getSeriesPlotterList() { return m_aSeriesPlotterList; } std::vector< VCoordinateSystem* >& getCooSysList() { return m_rVCooSysList; } std::vector< LegendEntryProvider* > getLegendEntryProviderList(); void AdaptScaleOfYAxisWithoutAttachedSeries( ChartModel& rModel ); bool isCategoryPositionShifted( const chart2::ScaleData& rSourceScale, bool bHasComplexCategories ) const; private: /** A vector of series plotters. */ SeriesPlottersType m_aSeriesPlotterList; /** A vector of coordinate systems. */ std::vector< VCoordinateSystem* >& m_rVCooSysList; /** A map whose key is a `XAxis` interface and the related value is * an object of `AxisUsage` type. */ ::std::map< uno::Reference< XAxis >, AxisUsage > m_aAxisUsageList; /** * Max axis index of all dimensions. Currently this can be either 0 or 1 * since we only support primary and secondary axes per dimension. The * value of 0 means all dimensions have only primary axis, while 1 means * at least one dimension has a secondary axis. */ sal_Int32 m_nMaxAxisIndex; bool m_bChartTypeUsesShiftedCategoryPositionPerDefault; sal_Int32 m_nDefaultDateNumberFormat; }; SeriesPlotterContainer::SeriesPlotterContainer( std::vector< VCoordinateSystem* >& rVCooSysList ) : m_rVCooSysList( rVCooSysList ) , m_nMaxAxisIndex(0) , m_bChartTypeUsesShiftedCategoryPositionPerDefault(false) , m_nDefaultDateNumberFormat(0) { } SeriesPlotterContainer::~SeriesPlotterContainer() { // - remove plotter from coordinatesystems for( size_t nC=0; nC < m_rVCooSysList.size(); nC++) m_rVCooSysList[nC]->clearMinimumAndMaximumSupplierList(); } std::vector< LegendEntryProvider* > SeriesPlotterContainer::getLegendEntryProviderList() { std::vector< LegendEntryProvider* > aRet( m_aSeriesPlotterList.size() ); SeriesPlottersType::iterator aPlotterIter = m_aSeriesPlotterList.begin(); const SeriesPlottersType::iterator aPlotterEnd = m_aSeriesPlotterList.end(); sal_Int32 nN = 0; for( aPlotterIter = m_aSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter, nN++ ) aRet[nN] = &(*aPlotterIter); return aRet; } VCoordinateSystem* findInCooSysList( const std::vector< VCoordinateSystem* >& rVCooSysList , const uno::Reference< XCoordinateSystem >& xCooSys ) { for( size_t nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; if(pVCooSys->getModel()==xCooSys) return pVCooSys; } return NULL; } VCoordinateSystem* lcl_getCooSysForPlotter( const std::vector< VCoordinateSystem* >& rVCooSysList, MinimumAndMaximumSupplier* pMinimumAndMaximumSupplier ) { if(!pMinimumAndMaximumSupplier) return 0; for( size_t nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; if(pVCooSys->hasMinimumAndMaximumSupplier( pMinimumAndMaximumSupplier )) return pVCooSys; } return 0; } VCoordinateSystem* addCooSysToList( std::vector< VCoordinateSystem* >& rVCooSysList , const uno::Reference< XCoordinateSystem >& xCooSys , ChartModel& rChartModel ) { VCoordinateSystem* pVCooSys = findInCooSysList( rVCooSysList, xCooSys ); if( !pVCooSys ) { pVCooSys = VCoordinateSystem::createCoordinateSystem(xCooSys ); if(pVCooSys) { OUString aCooSysParticle( ObjectIdentifier::createParticleForCoordinateSystem( xCooSys, rChartModel ) ); pVCooSys->setParticle(aCooSysParticle); pVCooSys->setExplicitCategoriesProvider( new ExplicitCategoriesProvider(xCooSys, rChartModel) ); rVCooSysList.push_back( pVCooSys ); } } return pVCooSys; } void SeriesPlotterContainer::initializeCooSysAndSeriesPlotter( ChartModel& rChartModel ) { sal_Int32 nDiagramIndex = 0;//todo if more than one diagram is supported uno::Reference< XDiagram > xDiagram( rChartModel.getFirstDiagram() ); if( !xDiagram.is()) return; uno::Reference< util::XNumberFormatsSupplier > xNumberFormatsSupplier( static_cast< ::cppu::OWeakObject* >( &rChartModel ), uno::UNO_QUERY ); if( rChartModel.hasInternalDataProvider() && DiagramHelper::isSupportingDateAxis( xDiagram ) ) m_nDefaultDateNumberFormat=DiagramHelper::getDateNumberFormat( xNumberFormatsSupplier ); sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram ); if(!nDimensionCount) { //@todo handle mixed dimension nDimensionCount = 2; } bool bSortByXValues = false; bool bConnectBars = false; bool bGroupBarsPerAxis = true; bool bIncludeHiddenCells = true; sal_Int32 nStartingAngle = 90; sal_Int32 n3DRelativeHeight = 100; try { uno::Reference< beans::XPropertySet > xDiaProp( xDiagram, uno::UNO_QUERY_THROW ); xDiaProp->getPropertyValue(CHART_UNONAME_SORT_BY_XVALUES) >>= bSortByXValues; xDiaProp->getPropertyValue( "ConnectBars" ) >>= bConnectBars; xDiaProp->getPropertyValue( "GroupBarsPerAxis" ) >>= bGroupBarsPerAxis; xDiaProp->getPropertyValue( "IncludeHiddenCells" ) >>= bIncludeHiddenCells; xDiaProp->getPropertyValue( "StartingAngle" ) >>= nStartingAngle; if (nDimensionCount == 3) { xDiaProp->getPropertyValue( "3DRelativeHeight" ) >>= n3DRelativeHeight; } } catch( const uno::Exception & ex ) { ASSERT_EXCEPTION( ex ); } //prepare for autoscaling and shape creation // - create plotter for charttypes (for each first scale group at each plotter, as they are independent) // - add series to plotter (thus each charttype can provide minimum and maximum values for autoscaling) // - add plotter to coordinate systems //iterate through all coordinate systems uno::Reference< XCoordinateSystemContainer > xCooSysContainer( xDiagram, uno::UNO_QUERY ); OSL_ASSERT( xCooSysContainer.is()); if( !xCooSysContainer.is()) return; uno::Reference< XColorScheme > xColorScheme( xDiagram->getDefaultColorScheme()); uno::Sequence< uno::Reference< XCoordinateSystem > > aCooSysList( xCooSysContainer->getCoordinateSystems() ); sal_Int32 nGlobalSeriesIndex = 0;//for automatic symbols for( sal_Int32 nCS = 0; nCS < aCooSysList.getLength(); ++nCS ) { uno::Reference< XCoordinateSystem > xCooSys( aCooSysList[nCS] ); VCoordinateSystem* pVCooSys = addCooSysToList(m_rVCooSysList,xCooSys,rChartModel); //iterate through all chart types in the current coordinate system uno::Reference< XChartTypeContainer > xChartTypeContainer( xCooSys, uno::UNO_QUERY ); OSL_ASSERT( xChartTypeContainer.is()); if( !xChartTypeContainer.is() ) continue; uno::Sequence< uno::Reference< XChartType > > aChartTypeList( xChartTypeContainer->getChartTypes() ); for( sal_Int32 nT = 0; nT < aChartTypeList.getLength(); ++nT ) { uno::Reference< XChartType > xChartType( aChartTypeList[nT] ); if(3 == nDimensionCount && xChartType->getChartType().equalsIgnoreAsciiCase(CHART2_SERVICE_NAME_CHARTTYPE_PIE)) { uno::Reference< beans::XPropertySet > xPropertySet( xChartType, uno::UNO_QUERY ); if (xPropertySet.is()) { try { sal_Int32 n3DRelativeHeightOldValue(100); uno::Any aAny = xPropertySet->getPropertyValue( "3DRelativeHeight" ); aAny >>= n3DRelativeHeightOldValue; if (n3DRelativeHeightOldValue != n3DRelativeHeight) xPropertySet->setPropertyValue( "3DRelativeHeight", uno::makeAny(n3DRelativeHeight) ); } catch (const uno::Exception&) { } } } if(nT==0) m_bChartTypeUsesShiftedCategoryPositionPerDefault = ChartTypeHelper::shiftCategoryPosAtXAxisPerDefault( xChartType ); bool bExcludingPositioning = DiagramPositioningMode_EXCLUDING == DiagramHelper::getDiagramPositioningMode( xDiagram ); VSeriesPlotter* pPlotter = VSeriesPlotter::createSeriesPlotter( xChartType, nDimensionCount, bExcludingPositioning ); if( !pPlotter ) continue; m_aSeriesPlotterList.push_back( pPlotter ); pPlotter->setNumberFormatsSupplier( xNumberFormatsSupplier ); pPlotter->setColorScheme( xColorScheme ); if(pVCooSys) pPlotter->setExplicitCategoriesProvider( pVCooSys->getExplicitCategoriesProvider() ); sal_Int32 nMissingValueTreatment = DiagramHelper::getCorrectedMissingValueTreatment( xDiagram, xChartType ); if(pVCooSys) pVCooSys->addMinimumAndMaximumSupplier(pPlotter); uno::Reference< XDataSeriesContainer > xDataSeriesContainer( xChartType, uno::UNO_QUERY ); OSL_ASSERT( xDataSeriesContainer.is()); if( !xDataSeriesContainer.is() ) continue; sal_Int32 zSlot=-1; sal_Int32 xSlot=-1; sal_Int32 ySlot=-1; uno::Sequence< uno::Reference< XDataSeries > > aSeriesList( xDataSeriesContainer->getDataSeries() ); for( sal_Int32 nS = 0; nS < aSeriesList.getLength(); ++nS ) { uno::Reference< XDataSeries > xDataSeries( aSeriesList[nS], uno::UNO_QUERY ); if(!xDataSeries.is()) continue; if( !bIncludeHiddenCells && !DataSeriesHelper::hasUnhiddenData(xDataSeries) ) continue; VDataSeries* pSeries = new VDataSeries( xDataSeries ); pSeries->setGlobalSeriesIndex(nGlobalSeriesIndex); nGlobalSeriesIndex++; if( bSortByXValues ) pSeries->doSortByXValues(); pSeries->setConnectBars( bConnectBars ); pSeries->setGroupBarsPerAxis( bGroupBarsPerAxis ); pSeries->setStartingAngle( nStartingAngle ); pSeries->setMissingValueTreatment( nMissingValueTreatment ); OUString aSeriesParticle( ObjectIdentifier::createParticleForSeries( nDiagramIndex, nCS, nT, nS ) ); pSeries->setParticle(aSeriesParticle); OUString aRole( ChartTypeHelper::getRoleOfSequenceForDataLabelNumberFormatDetection( xChartType ) ); pSeries->setRoleOfSequenceForDataLabelNumberFormatDetection(aRole); //ignore secondary axis for charttypes that do not suppoert them if( pSeries->getAttachedAxisIndex() != MAIN_AXIS_INDEX && !ChartTypeHelper::isSupportingSecondaryAxis( xChartType, nDimensionCount, 1 ) ) { pSeries->setAttachedAxisIndex(MAIN_AXIS_INDEX); } StackingDirection eDirection = pSeries->getStackingDirection(); switch(eDirection) { case StackingDirection_NO_STACKING: xSlot++; ySlot=-1; if(zSlot<0) zSlot=0; break; case StackingDirection_Y_STACKING: ySlot++; if(xSlot<0) xSlot=0; if(zSlot<0) zSlot=0; break; case StackingDirection_Z_STACKING: zSlot++; xSlot=-1; ySlot=-1; break; default: // UNO enums have one additional auto-generated case break; } pPlotter->addSeries( pSeries, zSlot, xSlot, ySlot ); } } } //transport seriesnames to the coordinatesystems if needed if( !m_aSeriesPlotterList.empty() ) { uno::Sequence< OUString > aSeriesNames; bool bSeriesNamesInitialized = false; for( size_t nC=0; nC < m_rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = m_rVCooSysList[nC]; if(!pVCooSys) continue; if( pVCooSys->needSeriesNamesForAxis() ) { if(!bSeriesNamesInitialized) { VSeriesPlotter* pSeriesPlotter = &m_aSeriesPlotterList[0]; if( pSeriesPlotter ) aSeriesNames = pSeriesPlotter->getSeriesNames(); bSeriesNamesInitialized = true; } pVCooSys->setSeriesNamesForAxis( aSeriesNames ); } } } } bool SeriesPlotterContainer::isCategoryPositionShifted( const chart2::ScaleData& rSourceScale, bool bHasComplexCategories ) const { if (rSourceScale.AxisType == AxisType::CATEGORY && m_bChartTypeUsesShiftedCategoryPositionPerDefault) return true; if (rSourceScale.AxisType==AxisType::CATEGORY && bHasComplexCategories) return true; if (rSourceScale.AxisType == AxisType::DATE) return true; if (rSourceScale.AxisType == AxisType::SERIES) return true; return false; } void SeriesPlotterContainer::initAxisUsageList(const Date& rNullDate) { m_aAxisUsageList.clear(); // Loop through coordinate systems in the diagram (though for now // there should only be one coordinate system per diagram). for (size_t i = 0, n = m_rVCooSysList.size(); i < n; ++i) { VCoordinateSystem* pVCooSys = m_rVCooSysList[i]; uno::Reference xCooSys = pVCooSys->getModel(); sal_Int32 nDimCount = xCooSys->getDimension(); for (sal_Int32 nDimIndex = 0; nDimIndex < nDimCount; ++nDimIndex) { bool bDateAxisAllowed = ChartTypeHelper::isSupportingDateAxis( AxisHelper::getChartTypeByIndex(xCooSys, 0), nDimCount, nDimIndex); // Each dimension may have primary and secondary axes. const sal_Int32 nMaxAxisIndex = xCooSys->getMaximumAxisIndexByDimension(nDimIndex); for (sal_Int32 nAxisIndex = 0; nAxisIndex <= nMaxAxisIndex; ++nAxisIndex) { uno::Reference xAxis = xCooSys->getAxisByDimension(nDimIndex, nAxisIndex); if (!xAxis.is()) continue; if (m_aAxisUsageList.find(xAxis) == m_aAxisUsageList.end()) { // Create axis usage object for this axis. chart2::ScaleData aSourceScale = xAxis->getScaleData(); ExplicitCategoriesProvider* pCatProvider = pVCooSys->getExplicitCategoriesProvider(); if (nDimIndex == 0) AxisHelper::checkDateAxis( aSourceScale, pCatProvider, bDateAxisAllowed ); bool bHasComplexCat = pCatProvider && pCatProvider->hasComplexCategories(); aSourceScale.ShiftedCategoryPosition = isCategoryPositionShifted(aSourceScale, bHasComplexCat); m_aAxisUsageList[xAxis].aAutoScaling = ScaleAutomatism(aSourceScale, rNullDate); } AxisUsage& rAxisUsage = m_aAxisUsageList[xAxis]; rAxisUsage.addCoordinateSystem(pVCooSys, nDimIndex, nAxisIndex); } } } // Determine the highest axis index of all dimensions. ::std::map< uno::Reference< XAxis >, AxisUsage >::iterator aAxisIter = m_aAxisUsageList.begin(); const ::std::map< uno::Reference< XAxis >, AxisUsage >::const_iterator aAxisEndIter = m_aAxisUsageList.end(); m_nMaxAxisIndex = 0; for (size_t i = 0, n = m_rVCooSysList.size(); i < n; ++i) { VCoordinateSystem* pVCooSys = m_rVCooSysList[i]; uno::Reference xCooSys = pVCooSys->getModel(); sal_Int32 nDimCount = xCooSys->getDimension(); for (sal_Int32 nDimIndex = 0; nDimIndex < nDimCount; ++nDimIndex) { for (aAxisIter = m_aAxisUsageList.begin(); aAxisIter != aAxisEndIter; ++aAxisIter) { sal_Int32 nLocalMax = aAxisIter->second.getMaxAxisIndexForDimension(nDimIndex); if (m_nMaxAxisIndex < nLocalMax) m_nMaxAxisIndex = nLocalMax; } } } } void SeriesPlotterContainer::setScalesFromCooSysToPlotter() { //set scales to plotter to enable them to provide the preferred scene AspectRatio SeriesPlottersType::iterator aPlotterIter = m_aSeriesPlotterList.begin(); const SeriesPlottersType::iterator aPlotterEnd = m_aSeriesPlotterList.end(); for( aPlotterIter = m_aSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { VSeriesPlotter* pSeriesPlotter = &(*aPlotterIter); VCoordinateSystem* pVCooSys = lcl_getCooSysForPlotter( m_rVCooSysList, pSeriesPlotter ); if(pVCooSys) { pSeriesPlotter->setScales( pVCooSys->getExplicitScales(0,0), pVCooSys->getPropertySwapXAndYAxis() ); sal_Int32 nMaxAxisIndex = pVCooSys->getMaximumAxisIndexByDimension(1);//only additional value axis are relevant for series plotter for( sal_Int32 nI=1; nI<=nMaxAxisIndex; nI++ ) pSeriesPlotter->addSecondaryValueScale( pVCooSys->getExplicitScale(1,nI), nI ); } } } void SeriesPlotterContainer::setNumberFormatsFromAxes() { //set numberformats to plotter to enable them to display the data labels in the numberformat of the axis SeriesPlottersType::iterator aPlotterIter = m_aSeriesPlotterList.begin(); const SeriesPlottersType::iterator aPlotterEnd = m_aSeriesPlotterList.end(); for( aPlotterIter = m_aSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { VSeriesPlotter* pSeriesPlotter = &(*aPlotterIter); VCoordinateSystem* pVCooSys = lcl_getCooSysForPlotter( m_rVCooSysList, pSeriesPlotter ); if(pVCooSys) { AxesNumberFormats aAxesNumberFormats; uno::Reference< XCoordinateSystem > xCooSys = pVCooSys->getModel(); sal_Int32 nDimensionCount = xCooSys->getDimension(); for(sal_Int32 nDimensionIndex=0; nDimensionIndexgetMaximumAxisIndexByDimension(nDimensionIndex); for(sal_Int32 nAxisIndex=0; nAxisIndex<=nMaximumAxisIndex; ++nAxisIndex) { try { Reference< beans::XPropertySet > xAxisProp( xCooSys->getAxisByDimension( nDimensionIndex, nAxisIndex ), uno::UNO_QUERY ); if( xAxisProp.is()) { sal_Int32 nNumberFormatKey(0); if( xAxisProp->getPropertyValue(CHART_UNONAME_NUMFMT) >>= nNumberFormatKey ) { aAxesNumberFormats.setFormat( nNumberFormatKey, nDimensionIndex, nAxisIndex ); } else if( nDimensionIndex==0 ) { //provide a default date format for date axis with own data aAxesNumberFormats.setFormat( m_nDefaultDateNumberFormat, nDimensionIndex, nAxisIndex ); } } } catch( const lang::IndexOutOfBoundsException& e ) { ASSERT_EXCEPTION( e ); } } } pSeriesPlotter->setAxesNumberFormats( aAxesNumberFormats ); } } } void SeriesPlotterContainer::updateScalesAndIncrementsOnAxes() { for( size_t nC=0; nC < m_rVCooSysList.size(); nC++) m_rVCooSysList[nC]->updateScalesAndIncrementsOnAxes(); } void SeriesPlotterContainer::doAutoScaling( ChartModel& rChartModel ) { if (m_aSeriesPlotterList.empty() || m_aAxisUsageList.empty()) // We need these two containers populated to do auto-scaling. Bail out. return; ::std::map< uno::Reference< XAxis >, AxisUsage >::iterator aAxisIter = m_aAxisUsageList.begin(); const ::std::map< uno::Reference< XAxis >, AxisUsage >::const_iterator aAxisEndIter = m_aAxisUsageList.end(); //iterate over the main scales first than secondary axis for (sal_Int32 nAxisIndex = 0; nAxisIndex <= m_nMaxAxisIndex; ++nAxisIndex) { // - first do autoscale for all x and z scales (because they are treated independent) for( aAxisIter = m_aAxisUsageList.begin(); aAxisIter != aAxisEndIter; ++aAxisIter ) { AxisUsage& rAxisUsage = (*aAxisIter).second; rAxisUsage.prepareAutomaticAxisScaling(rAxisUsage.aAutoScaling, 0, nAxisIndex); rAxisUsage.prepareAutomaticAxisScaling(rAxisUsage.aAutoScaling, 2, nAxisIndex); ExplicitScaleData aExplicitScale; ExplicitIncrementData aExplicitIncrement; rAxisUsage.aAutoScaling.calculateExplicitScaleAndIncrement( aExplicitScale, aExplicitIncrement ); rAxisUsage.setExplicitScaleAndIncrement(0, nAxisIndex, aExplicitScale, aExplicitIncrement); rAxisUsage.setExplicitScaleAndIncrement(2, nAxisIndex, aExplicitScale, aExplicitIncrement); } // - second do autoscale for the dependent y scales (the coordinate systems are prepared with x and z scales already ) for( aAxisIter = m_aAxisUsageList.begin(); aAxisIter != aAxisEndIter; ++aAxisIter ) { AxisUsage& rAxisUsage = (*aAxisIter).second; rAxisUsage.prepareAutomaticAxisScaling(rAxisUsage.aAutoScaling, 1, nAxisIndex); ExplicitScaleData aExplicitScale; ExplicitIncrementData aExplicitIncrement; rAxisUsage.aAutoScaling.calculateExplicitScaleAndIncrement( aExplicitScale, aExplicitIncrement ); rAxisUsage.setExplicitScaleAndIncrement(0, nAxisIndex, aExplicitScale, aExplicitIncrement); rAxisUsage.setExplicitScaleAndIncrement(1, nAxisIndex, aExplicitScale, aExplicitIncrement); rAxisUsage.setExplicitScaleAndIncrement(2, nAxisIndex, aExplicitScale, aExplicitIncrement); } } AdaptScaleOfYAxisWithoutAttachedSeries( rChartModel ); } void SeriesPlotterContainer::AdaptScaleOfYAxisWithoutAttachedSeries( ChartModel& rModel ) { //issue #i80518# ::std::map< uno::Reference< XAxis >, AxisUsage >::iterator aAxisIter = m_aAxisUsageList.begin(); const ::std::map< uno::Reference< XAxis >, AxisUsage >::const_iterator aAxisEndIter = m_aAxisUsageList.end(); for( sal_Int32 nAxisIndex=0; nAxisIndex<=m_nMaxAxisIndex; nAxisIndex++ ) { for( aAxisIter = m_aAxisUsageList.begin(); aAxisIter != aAxisEndIter; ++aAxisIter ) { AxisUsage& rAxisUsage = (*aAxisIter).second; ::std::vector< VCoordinateSystem* > aVCooSysList_Y = rAxisUsage.getCoordinateSystems( 1, nAxisIndex ); if( !aVCooSysList_Y.size() ) continue; uno::Reference< XDiagram > xDiagram( rModel.getFirstDiagram() ); if (!xDiagram.is()) continue; bool bSeriesAttachedToThisAxis = false; sal_Int32 nAttachedAxisIndex = -1; { ::std::vector< Reference< XDataSeries > > aSeriesVector( DiagramHelper::getDataSeriesFromDiagram( xDiagram ) ); ::std::vector< Reference< XDataSeries > >::const_iterator aIter = aSeriesVector.begin(); for( ; aIter != aSeriesVector.end(); ++aIter ) { sal_Int32 nCurrentIndex = DataSeriesHelper::getAttachedAxisIndex( *aIter ); if( nAxisIndex == nCurrentIndex ) { bSeriesAttachedToThisAxis = true; break; } else if( nAttachedAxisIndex<0 || nAttachedAxisIndex>nCurrentIndex ) nAttachedAxisIndex=nCurrentIndex; } } if (bSeriesAttachedToThisAxis || nAttachedAxisIndex < 0) continue; for( size_t nC = 0; nC < aVCooSysList_Y.size(); ++nC ) { aVCooSysList_Y[nC]->prepareAutomaticAxisScaling( rAxisUsage.aAutoScaling, 1, nAttachedAxisIndex ); ExplicitScaleData aExplicitScaleSource = aVCooSysList_Y[nC]->getExplicitScale( 1,nAttachedAxisIndex ); ExplicitIncrementData aExplicitIncrementSource = aVCooSysList_Y[nC]->getExplicitIncrement( 1,nAttachedAxisIndex ); ExplicitScaleData aExplicitScaleDest = aVCooSysList_Y[nC]->getExplicitScale( 1,nAxisIndex );; ExplicitIncrementData aExplicitIncrementDest = aVCooSysList_Y[nC]->getExplicitIncrement( 1,nAxisIndex );; aExplicitScaleDest.Orientation = aExplicitScaleSource.Orientation; aExplicitScaleDest.Scaling = aExplicitScaleSource.Scaling; aExplicitScaleDest.AxisType = aExplicitScaleSource.AxisType; aExplicitIncrementDest.BaseValue = aExplicitIncrementSource.BaseValue; ScaleData aScale( rAxisUsage.aAutoScaling.getScale() ); if( !aScale.Minimum.hasValue() ) { bool bNewMinOK = true; double fMax=0.0; if( aScale.Maximum >>= fMax ) bNewMinOK = (aExplicitScaleSource.Minimum <= fMax); if( bNewMinOK ) aExplicitScaleDest.Minimum = aExplicitScaleSource.Minimum; } else aExplicitIncrementDest.BaseValue = aExplicitScaleDest.Minimum; if( !aScale.Maximum.hasValue() ) { bool bNewMaxOK = true; double fMin=0.0; if( aScale.Minimum >>= fMin ) bNewMaxOK = (fMin <= aExplicitScaleSource.Maximum); if( bNewMaxOK ) aExplicitScaleDest.Maximum = aExplicitScaleSource.Maximum; } if( !aScale.Origin.hasValue() ) aExplicitScaleDest.Origin = aExplicitScaleSource.Origin; if( !aScale.IncrementData.Distance.hasValue() ) aExplicitIncrementDest.Distance = aExplicitIncrementSource.Distance; bool bAutoMinorInterval = true; if( aScale.IncrementData.SubIncrements.getLength() ) bAutoMinorInterval = !( aScale.IncrementData.SubIncrements[0].IntervalCount.hasValue() ); if( bAutoMinorInterval ) { if( !aExplicitIncrementDest.SubIncrements.empty() && !aExplicitIncrementSource.SubIncrements.empty() ) aExplicitIncrementDest.SubIncrements[0].IntervalCount = aExplicitIncrementSource.SubIncrements[0].IntervalCount; } aVCooSysList_Y[nC]->setExplicitScaleAndIncrement( 1, nAxisIndex, aExplicitScaleDest, aExplicitIncrementDest ); } } } if( AxisHelper::isAxisPositioningEnabled() ) { //correct origin for y main axis (the origin is where the other main axis crosses) sal_Int32 nAxisIndex=0; sal_Int32 nDimensionIndex=1; for( aAxisIter = m_aAxisUsageList.begin(); aAxisIter != aAxisEndIter; ++aAxisIter ) { AxisUsage& rAxisUsage = (*aAxisIter).second; ::std::vector< VCoordinateSystem* > aVCooSysList = rAxisUsage.getCoordinateSystems(nDimensionIndex,nAxisIndex); size_t nC; for( nC=0; nC < aVCooSysList.size(); nC++) { ExplicitScaleData aExplicitScale( aVCooSysList[nC]->getExplicitScale( nDimensionIndex, nAxisIndex ) ); ExplicitIncrementData aExplicitIncrement( aVCooSysList[nC]->getExplicitIncrement( nDimensionIndex, nAxisIndex ) ); Reference< chart2::XCoordinateSystem > xCooSys( aVCooSysList[nC]->getModel() ); Reference< XAxis > xAxis( xCooSys->getAxisByDimension( nDimensionIndex, nAxisIndex ) ); Reference< beans::XPropertySet > xCrossingMainAxis( AxisHelper::getCrossingMainAxis( xAxis, xCooSys ), uno::UNO_QUERY ); ::com::sun::star::chart::ChartAxisPosition eCrossingMainAxisPos( ::com::sun::star::chart::ChartAxisPosition_ZERO ); if( xCrossingMainAxis.is() ) { xCrossingMainAxis->getPropertyValue("CrossoverPosition") >>= eCrossingMainAxisPos; if( ::com::sun::star::chart::ChartAxisPosition_VALUE == eCrossingMainAxisPos ) { double fValue = 0.0; xCrossingMainAxis->getPropertyValue("CrossoverValue") >>= fValue; aExplicitScale.Origin = fValue; } else if( ::com::sun::star::chart::ChartAxisPosition_ZERO == eCrossingMainAxisPos ) aExplicitScale.Origin = 0.0; else if( ::com::sun::star::chart::ChartAxisPosition_START == eCrossingMainAxisPos ) aExplicitScale.Origin = aExplicitScale.Minimum; else if( ::com::sun::star::chart::ChartAxisPosition_END == eCrossingMainAxisPos ) aExplicitScale.Origin = aExplicitScale.Maximum; } aVCooSysList[nC]->setExplicitScaleAndIncrement( nDimensionIndex, nAxisIndex, aExplicitScale, aExplicitIncrement ); } } } } drawing::Direction3D SeriesPlotterContainer::getPreferredAspectRatio() { drawing::Direction3D aPreferredAspectRatio(1.0,1.0,1.0); sal_Int32 nPlotterCount=0; //get a list of all preferred aspect ratios and combine them //first with special demands wins (less or equal zero <-> arbitrary) double fx, fy, fz; fx = fy = fz = -1.0; SeriesPlottersType::const_iterator aPlotterIter = m_aSeriesPlotterList.begin(); const SeriesPlottersType::const_iterator aPlotterEnd = m_aSeriesPlotterList.end(); for( aPlotterIter = m_aSeriesPlotterList.begin(), nPlotterCount=0 ; aPlotterIter != aPlotterEnd; ++aPlotterIter, ++nPlotterCount ) { drawing::Direction3D aSingleRatio( aPlotterIter->getPreferredDiagramAspectRatio() ); if( fx<0 && aSingleRatio.DirectionX>0 ) fx = aSingleRatio.DirectionX; if( fy<0 && aSingleRatio.DirectionY>0 ) { if( fx>0 && aSingleRatio.DirectionX>0 ) fy = fx*aSingleRatio.DirectionY/aSingleRatio.DirectionX; else if( fz>0 && aSingleRatio.DirectionZ>0 ) fy = fz*aSingleRatio.DirectionY/aSingleRatio.DirectionZ; else fy = aSingleRatio.DirectionY; } if( fz<0 && aSingleRatio.DirectionZ>0 ) { if( fx>0 && aSingleRatio.DirectionX>0 ) fz = fx*aSingleRatio.DirectionZ/aSingleRatio.DirectionX; else if( fy>0 && aSingleRatio.DirectionY>0 ) fz = fy*aSingleRatio.DirectionZ/aSingleRatio.DirectionY; else fz = aSingleRatio.DirectionZ; } if( fx>0 && fy>0 && fz>0 ) break; } aPreferredAspectRatio = drawing::Direction3D(fx, fy, fz); return aPreferredAspectRatio; } } struct CreateShapeParam2D { css::awt::Rectangle maRemainingSpace; boost::shared_ptr mpSeriesPlotterContainer; boost::shared_ptr mpVTitleX; boost::shared_ptr mpVTitleY; boost::shared_ptr mpVTitleZ; boost::shared_ptr mpVTitleSecondX; boost::shared_ptr mpVTitleSecondY; css::uno::Reference mxMarkHandles; css::uno::Reference mxPlotAreaWithAxes; css::uno::Reference mxDiagramWithAxesShapes; bool mbAutoPosTitleX; bool mbAutoPosTitleY; bool mbAutoPosTitleZ; bool mbAutoPosSecondTitleX; bool mbAutoPosSecondTitleY; bool mbUseFixedInnerSize; CreateShapeParam2D() : mbAutoPosTitleX(true), mbAutoPosTitleY(true), mbAutoPosTitleZ(true), mbAutoPosSecondTitleX(true), mbAutoPosSecondTitleY(true), mbUseFixedInnerSize(false) {} }; class GL2DRenderer : public IRenderer { public: GL2DRenderer(ChartView* pView); virtual ~GL2DRenderer(); virtual void update() SAL_OVERRIDE; virtual void clickedAt(const Point& rPos, sal_uInt16 nButton) SAL_OVERRIDE; virtual void mouseDragMove(const Point& rBegin, const Point& rEnd, sal_uInt16 nButton) SAL_OVERRIDE; virtual void scroll(long nDelta) SAL_OVERRIDE; virtual void contextDestroyed() SAL_OVERRIDE; const OpenGLWindow* getOpenGLWindow() const; void updateOpenGLWindow(); private: ChartView* mpView; bool mbContextDestroyed; VclPtr mpWindow; }; GL2DRenderer::GL2DRenderer(ChartView* pView): mpView(pView), mbContextDestroyed(false), mpWindow(mpView->mrChartModel.getOpenGLWindow()) { } GL2DRenderer::~GL2DRenderer() { if(!mbContextDestroyed && mpWindow) mpWindow->setRenderer(NULL); } void GL2DRenderer::update() { mpView->update(); mpView->render(); } void GL2DRenderer::clickedAt(const Point&, sal_uInt16 ) { } void GL2DRenderer::mouseDragMove(const Point& , const Point& , sal_uInt16 ) { } void GL2DRenderer::scroll(long ) { } void GL2DRenderer::contextDestroyed() { mbContextDestroyed = true; } const OpenGLWindow* GL2DRenderer::getOpenGLWindow() const { return mpWindow; } void GL2DRenderer::updateOpenGLWindow() { if(mbContextDestroyed) return; OpenGLWindow* pWindow = mpView->mrChartModel.getOpenGLWindow(); if(pWindow != mpWindow) { if(mpWindow) { mpWindow->setRenderer(NULL); } if(pWindow) { pWindow->setRenderer(this); } } mpWindow = pWindow; } const uno::Sequence& ExplicitValueProvider::getUnoTunnelId() { return theExplicitValueProviderUnoTunnelId::get().getSeq(); } ExplicitValueProvider* ExplicitValueProvider::getExplicitValueProvider( const Reference< uno::XInterface >& xChartView ) { ExplicitValueProvider* pExplicitValueProvider=0; Reference< lang::XUnoTunnel > xTunnel( xChartView, uno::UNO_QUERY ); if( xTunnel.is() ) { pExplicitValueProvider = reinterpret_cast(xTunnel->getSomething( ExplicitValueProvider::getUnoTunnelId() )); } return pExplicitValueProvider; } ChartView::ChartView( uno::Reference const & xContext, ChartModel& rModel) : m_aMutex() , m_xCC(xContext) , mrChartModel(rModel) , m_xShapeFactory() , m_xDrawPage() , m_pDrawModelWrapper() , m_aListenerContainer( m_aMutex ) , m_bViewDirty(true) , m_bInViewUpdate(false) , m_bViewUpdatePending(false) , m_bRefreshAddIn(true) , m_aPageResolution(1000,1000) , m_bPointsWereSkipped(false) , m_nScaleXNumerator(1) , m_nScaleXDenominator(1) , m_nScaleYNumerator(1) , m_nScaleYDenominator(1) , m_bSdrViewIsInEditMode(false) , m_aResultingDiagramRectangleExcludingAxes(0,0,0,0) , mp2DRenderer(new GL2DRenderer(this)) { init(); } void ChartView::init() { if( !m_pDrawModelWrapper.get() ) { SolarMutexGuard aSolarGuard; m_pDrawModelWrapper = ::boost::shared_ptr< DrawModelWrapper >( new DrawModelWrapper( m_xCC ) ); m_xShapeFactory = m_pDrawModelWrapper->getShapeFactory(); m_xDrawPage = m_pDrawModelWrapper->getMainDrawPage(); StartListening( m_pDrawModelWrapper->getSdrModel(), false /*bPreventDups*/ ); } } void SAL_CALL ChartView::initialize( const uno::Sequence< uno::Any >& ) throw ( uno::Exception, uno::RuntimeException, std::exception) { init(); } ChartView::~ChartView() { maTimeBased.maTimer.Stop(); // #i120831#. In ChartView::initialize(), m_xShapeFactory is created from SdrModel::getUnoModel() and indirectly // from SfxBaseModel, it needs call dispose() to make sure SfxBaseModel object is freed correctly. uno::Reference< lang::XComponent > xComp( m_xShapeFactory, uno::UNO_QUERY); if ( xComp.is() ) xComp->dispose(); if( m_pDrawModelWrapper.get() ) { SolarMutexGuard aSolarGuard; EndListening( m_pDrawModelWrapper->getSdrModel(), false /*bAllDups*/ ); m_pDrawModelWrapper.reset(); } m_xDrawPage = NULL; impl_deleteCoordinateSystems(); } void ChartView::impl_deleteCoordinateSystems() { //delete all coordinate systems ::std::vector< VCoordinateSystem* > aVectorToDeleteObjects; ::std::swap( aVectorToDeleteObjects, m_aVCooSysList );//#i109770# ::std::vector< VCoordinateSystem* >::const_iterator aIter = aVectorToDeleteObjects.begin(); const ::std::vector< VCoordinateSystem* >::const_iterator aEnd = aVectorToDeleteObjects.end(); for( ; aIter != aEnd; ++aIter ) { delete *aIter; } aVectorToDeleteObjects.clear(); } // datatransfer::XTransferable namespace { const OUString lcl_aGDIMetaFileMIMEType( "application/x-openoffice-gdimetafile;windows_formatname=\"GDIMetaFile\"" ); const OUString lcl_aGDIMetaFileMIMETypeHighContrast( "application/x-openoffice-highcontrast-gdimetafile;windows_formatname=\"GDIMetaFile\"" ); } // anonymous namespace void ChartView::getMetaFile( const uno::Reference< io::XOutputStream >& xOutStream , bool bUseHighContrast ) { if( !m_xDrawPage.is() ) return; // creating the graphic exporter uno::Reference< drawing::XGraphicExportFilter > xExporter = drawing::GraphicExportFilter::create( m_xCC ); uno::Sequence< beans::PropertyValue > aProps(3); aProps[0].Name = "FilterName"; aProps[0].Value <<= OUString("SVM"); aProps[1].Name = "OutputStream"; aProps[1].Value <<= xOutStream; uno::Sequence< beans::PropertyValue > aFilterData(4); aFilterData[0].Name = "ExportOnlyBackground"; aFilterData[0].Value <<= sal_False; aFilterData[1].Name = "HighContrast"; aFilterData[1].Value <<= bUseHighContrast; aFilterData[2].Name = "Version"; const sal_Int32 nVersion = SOFFICE_FILEFORMAT_50; aFilterData[2].Value <<= nVersion; aFilterData[3].Name = "CurrentPage"; aFilterData[3].Value <<= uno::Reference< uno::XInterface >( m_xDrawPage, uno::UNO_QUERY ); //#i75867# poor quality of ole's alternative view with 3D scenes and zoomfactors besides 100% { aFilterData.realloc( aFilterData.getLength()+4 ); aFilterData[4].Name = "ScaleXNumerator"; aFilterData[4].Value = uno::makeAny( m_nScaleXNumerator ); aFilterData[5].Name = "ScaleXDenominator"; aFilterData[5].Value = uno::makeAny( m_nScaleXDenominator ); aFilterData[6].Name = "ScaleYNumerator"; aFilterData[6].Value = uno::makeAny( m_nScaleYNumerator ); aFilterData[7].Name = "ScaleYDenominator"; aFilterData[7].Value = uno::makeAny( m_nScaleYDenominator ); } aProps[2].Name = "FilterData"; aProps[2].Value <<= aFilterData; xExporter->setSourceDocument( uno::Reference< lang::XComponent >( m_xDrawPage, uno::UNO_QUERY) ); if( xExporter->filter( aProps ) ) { xOutStream->flush(); xOutStream->closeOutput(); uno::Reference< io::XSeekable > xSeekable( xOutStream, uno::UNO_QUERY ); if( xSeekable.is() ) xSeekable->seek(0); } } uno::Any SAL_CALL ChartView::getTransferData( const datatransfer::DataFlavor& aFlavor ) throw (datatransfer::UnsupportedFlavorException, io::IOException, uno::RuntimeException, std::exception) { bool bHighContrastMetaFile( aFlavor.MimeType.equals(lcl_aGDIMetaFileMIMETypeHighContrast)); uno::Any aRet; if( ! (bHighContrastMetaFile || aFlavor.MimeType.equals(lcl_aGDIMetaFileMIMEType)) ) return aRet; update(); SvMemoryStream aStream( 1024, 1024 ); utl::OStreamWrapper* pStreamWrapper = new utl::OStreamWrapper( aStream ); uno::Reference< io::XOutputStream > xOutStream( pStreamWrapper ); uno::Reference< io::XInputStream > xInStream( pStreamWrapper ); uno::Reference< io::XSeekable > xSeekable( pStreamWrapper ); if( xOutStream.is() ) { this->getMetaFile( xOutStream, bHighContrastMetaFile ); if( xInStream.is() && xSeekable.is() ) { xSeekable->seek(0); sal_Int32 nBytesToRead = xInStream->available(); uno::Sequence< sal_Int8 > aSeq( nBytesToRead ); xInStream->readBytes( aSeq, nBytesToRead); aRet <<= aSeq; xInStream->closeInput(); } } return aRet; } uno::Sequence< datatransfer::DataFlavor > SAL_CALL ChartView::getTransferDataFlavors() throw (uno::RuntimeException, std::exception) { uno::Sequence< datatransfer::DataFlavor > aRet(2); aRet[0] = datatransfer::DataFlavor( lcl_aGDIMetaFileMIMEType, "GDIMetaFile", cppu::UnoType>::get() ); aRet[1] = datatransfer::DataFlavor( lcl_aGDIMetaFileMIMETypeHighContrast, "GDIMetaFile", cppu::UnoType>::get() ); return aRet; } sal_Bool SAL_CALL ChartView::isDataFlavorSupported( const datatransfer::DataFlavor& aFlavor ) throw (uno::RuntimeException, std::exception) { return ( aFlavor.MimeType.equals(lcl_aGDIMetaFileMIMEType) || aFlavor.MimeType.equals(lcl_aGDIMetaFileMIMETypeHighContrast) ); } // ____ XUnoTunnel ___ ::sal_Int64 SAL_CALL ChartView::getSomething( const uno::Sequence< ::sal_Int8 >& aIdentifier ) throw( uno::RuntimeException, std::exception) { if( aIdentifier.getLength() == 16 && 0 == memcmp( ExplicitValueProvider::getUnoTunnelId().getConstArray(), aIdentifier.getConstArray(), 16 ) ) { ExplicitValueProvider* pProvider = this; return reinterpret_cast(pProvider); } return 0; } // lang::XServiceInfo OUString SAL_CALL ChartView::getImplementationName() throw( css::uno::RuntimeException, std::exception ) { return getImplementationName_Static(); } OUString ChartView::getImplementationName_Static() { return CHART_VIEW_SERVICE_IMPLEMENTATION_NAME; } sal_Bool SAL_CALL ChartView::supportsService( const OUString& rServiceName ) throw( css::uno::RuntimeException, std::exception ) { return cppu::supportsService(this, rServiceName); } css::uno::Sequence< OUString > SAL_CALL ChartView::getSupportedServiceNames() throw( css::uno::RuntimeException, std::exception ) { return getSupportedServiceNames_Static(); } uno::Sequence< OUString > ChartView::getSupportedServiceNames_Static() { uno::Sequence< OUString > aSNS( 1 ); aSNS.getArray()[ 0 ] = CHART_VIEW_SERVICE_NAME; return aSNS; } ::basegfx::B3DHomMatrix createTransformationSceneToScreen( const ::basegfx::B2IRectangle& rDiagramRectangleWithoutAxes ) { ::basegfx::B3DHomMatrix aM; aM.scale(double(rDiagramRectangleWithoutAxes.getWidth())/FIXED_SIZE_FOR_3D_CHART_VOLUME , -double(rDiagramRectangleWithoutAxes.getHeight())/FIXED_SIZE_FOR_3D_CHART_VOLUME, 1.0 ); aM.translate(double(rDiagramRectangleWithoutAxes.getMinX()) , double(rDiagramRectangleWithoutAxes.getMinY()+rDiagramRectangleWithoutAxes.getHeight()-1), 0); return aM; } namespace { bool lcl_IsPieOrDonut( const uno::Reference< XDiagram >& xDiagram ) { //special treatment for pie charts //the size is checked after complete creation to get the datalabels into the given space //todo: this is just a workaround at the moment for pie and donut labels return DiagramHelper::isPieOrDonutChart( xDiagram ); } void lcl_setDefaultWritingMode( ::boost::shared_ptr< DrawModelWrapper > pDrawModelWrapper, ChartModel& rModel) { //get writing mode from parent document: if( SvtLanguageOptions().IsCTLFontEnabled() ) { try { sal_Int16 nWritingMode=-1; uno::Reference< beans::XPropertySet > xParentProps( rModel.getParent(), uno::UNO_QUERY ); uno::Reference< style::XStyleFamiliesSupplier > xStyleFamiliesSupplier( xParentProps, uno::UNO_QUERY ); if( xStyleFamiliesSupplier.is() ) { uno::Reference< container::XNameAccess > xStylesFamilies( xStyleFamiliesSupplier->getStyleFamilies() ); if( xStylesFamilies.is() ) { if( !xStylesFamilies->hasByName( "PageStyles" ) ) { //draw/impress is parent document uno::Reference< lang::XMultiServiceFactory > xFatcory( xParentProps, uno::UNO_QUERY ); if( xFatcory.is() ) { uno::Reference< beans::XPropertySet > xDrawDefaults( xFatcory->createInstance( "com.sun.star.drawing.Defaults" ), uno::UNO_QUERY ); if( xDrawDefaults.is() ) xDrawDefaults->getPropertyValue( "WritingMode" ) >>= nWritingMode; } } else { uno::Reference< container::XNameAccess > xPageStyles( xStylesFamilies->getByName( "PageStyles" ), uno::UNO_QUERY ); if( xPageStyles.is() ) { OUString aPageStyle; uno::Reference< text::XTextDocument > xTextDocument( xParentProps, uno::UNO_QUERY ); if( xTextDocument.is() ) { //writer is parent document //retrieve the current page style from the text cursor property PageStyleName uno::Reference< text::XTextEmbeddedObjectsSupplier > xTextEmbeddedObjectsSupplier( xTextDocument, uno::UNO_QUERY ); if( xTextEmbeddedObjectsSupplier.is() ) { uno::Reference< container::XNameAccess > xEmbeddedObjects( xTextEmbeddedObjectsSupplier->getEmbeddedObjects() ); if( xEmbeddedObjects.is() ) { uno::Sequence< OUString > aNames( xEmbeddedObjects->getElementNames() ); sal_Int32 nCount = aNames.getLength(); for( sal_Int32 nN=0; nN xEmbeddedProps( xEmbeddedObjects->getByName( aNames[nN] ), uno::UNO_QUERY ); if( xEmbeddedProps.is() ) { static OUString aChartCLSID = OUString( SvGlobalName( SO3_SCH_CLASSID ).GetHexName()); OUString aCLSID; xEmbeddedProps->getPropertyValue( "CLSID" ) >>= aCLSID; if( aCLSID.equals(aChartCLSID) ) { uno::Reference< text::XTextContent > xEmbeddedObject( xEmbeddedProps, uno::UNO_QUERY ); if( xEmbeddedObject.is() ) { uno::Reference< text::XTextRange > xAnchor( xEmbeddedObject->getAnchor() ); if( xAnchor.is() ) { uno::Reference< beans::XPropertySet > xAnchorProps( xAnchor, uno::UNO_QUERY ); if( xAnchorProps.is() ) { xAnchorProps->getPropertyValue( "WritingMode" ) >>= nWritingMode; } uno::Reference< text::XText > xText( xAnchor->getText() ); if( xText.is() ) { uno::Reference< beans::XPropertySet > xTextCursorProps( xText->createTextCursor(), uno::UNO_QUERY ); if( xTextCursorProps.is() ) xTextCursorProps->getPropertyValue( "PageStyleName" ) >>= aPageStyle; } } } break; } } } } } if( aPageStyle.isEmpty() ) { uno::Reference< text::XText > xText( xTextDocument->getText() ); if( xText.is() ) { uno::Reference< beans::XPropertySet > xTextCursorProps( xText->createTextCursor(), uno::UNO_QUERY ); if( xTextCursorProps.is() ) xTextCursorProps->getPropertyValue( "PageStyleName" ) >>= aPageStyle; } } } else { //Calc is parent document xParentProps->getPropertyValue( "PageStyle" ) >>= aPageStyle; if(aPageStyle.isEmpty()) aPageStyle = "Default"; } if( nWritingMode == -1 || nWritingMode == text::WritingMode2::PAGE ) { uno::Reference< beans::XPropertySet > xPageStyle( xPageStyles->getByName( aPageStyle ), uno::UNO_QUERY ); if( xPageStyle.is() ) xPageStyle->getPropertyValue( "WritingMode" ) >>= nWritingMode; } } } } } if( nWritingMode != -1 && nWritingMode != text::WritingMode2::PAGE ) { if( pDrawModelWrapper.get() ) pDrawModelWrapper->GetItemPool().SetPoolDefaultItem(SvxFrameDirectionItem(static_cast(nWritingMode), EE_PARA_WRITINGDIR) ); } } catch( const uno::Exception& ex ) { ASSERT_EXCEPTION( ex ); } } } sal_Int16 lcl_getDefaultWritingModeFromPool( const boost::shared_ptr& pDrawModelWrapper ) { sal_Int16 nWritingMode = text::WritingMode2::LR_TB; if(!pDrawModelWrapper) return nWritingMode; const SfxPoolItem* pItem = &(pDrawModelWrapper->GetItemPool().GetDefaultItem( EE_PARA_WRITINGDIR )); if( pItem ) nWritingMode = static_cast< sal_Int16 >((static_cast< const SvxFrameDirectionItem * >( pItem ))->GetValue()); return nWritingMode; } } //end anonymous namespace awt::Rectangle ChartView::impl_createDiagramAndContent( const CreateShapeParam2D& rParam, const awt::Size& rPageSize ) { //return the used rectangle awt::Rectangle aUsedOuterRect(rParam.maRemainingSpace.X, rParam.maRemainingSpace.Y, 0, 0); uno::Reference< XDiagram > xDiagram( mrChartModel.getFirstDiagram() ); if( !xDiagram.is()) return aUsedOuterRect; sal_Int32 nDimensionCount = DiagramHelper::getDimension( xDiagram ); if(!nDimensionCount) { //@todo handle mixed dimension nDimensionCount = 2; } basegfx::B2IRectangle aAvailableOuterRect = BaseGFXHelper::makeRectangle(rParam.maRemainingSpace); const std::vector< VCoordinateSystem* >& rVCooSysList( rParam.mpSeriesPlotterContainer->getCooSysList() ); SeriesPlottersType& rSeriesPlotterList = rParam.mpSeriesPlotterContainer->getSeriesPlotterList(); //create VAxis, so they can give necessary information for automatic scaling uno::Reference const xChartDoc(&mrChartModel); uno::Reference const xNumberFormatsSupplier( mrChartModel.getNumberFormatsSupplier()); size_t nC = 0; for( nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; if(3==nDimensionCount) { uno::Reference xSceneProperties( xDiagram, uno::UNO_QUERY ); CuboidPlanePosition eLeftWallPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardLeftWall( xSceneProperties ) ); CuboidPlanePosition eBackWallPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardBackWall( xSceneProperties ) ); CuboidPlanePosition eBottomPos( ThreeDHelper::getAutomaticCuboidPlanePositionForStandardBottom( xSceneProperties ) ); pVCooSys->set3DWallPositions( eLeftWallPos, eBackWallPos, eBottomPos ); } pVCooSys->createVAxisList(xChartDoc, rPageSize, rParam.maRemainingSpace); } // - prepare list of all axis and how they are used Date aNullDate = NumberFormatterWrapper( xNumberFormatsSupplier ).getNullDate(); rParam.mpSeriesPlotterContainer->initAxisUsageList(aNullDate); rParam.mpSeriesPlotterContainer->doAutoScaling( mrChartModel ); rParam.mpSeriesPlotterContainer->setScalesFromCooSysToPlotter(); rParam.mpSeriesPlotterContainer->setNumberFormatsFromAxes(); //create shapes //aspect ratio drawing::Direction3D aPreferredAspectRatio = rParam.mpSeriesPlotterContainer->getPreferredAspectRatio(); uno::Reference< drawing::XShapes > xSeriesTargetInFrontOfAxis(0); uno::Reference< drawing::XShapes > xSeriesTargetBehindAxis(0); VDiagram aVDiagram(xDiagram, aPreferredAspectRatio, nDimensionCount); bool bIsPieOrDonut = lcl_IsPieOrDonut(xDiagram); {//create diagram aVDiagram.init(rParam.mxDiagramWithAxesShapes, m_xShapeFactory); aVDiagram.createShapes( awt::Point(rParam.maRemainingSpace.X, rParam.maRemainingSpace.Y), awt::Size(rParam.maRemainingSpace.Width, rParam.maRemainingSpace.Height)); xSeriesTargetInFrontOfAxis = aVDiagram.getCoordinateRegion(); // It is preferrable to use full size than minimum for pie charts if (!bIsPieOrDonut && !rParam.mbUseFixedInnerSize) aVDiagram.reduceToMimimumSize(); } uno::Reference< drawing::XShapes > xTextTargetShapes = AbstractShapeFactory::getOrCreateShapeFactory(m_xShapeFactory)->createGroup2D(rParam.mxDiagramWithAxesShapes); // - create axis and grids for all coordinate systems //init all coordinate systems for( nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; pVCooSys->initPlottingTargets(xSeriesTargetInFrontOfAxis,xTextTargetShapes,m_xShapeFactory,xSeriesTargetBehindAxis); pVCooSys->setTransformationSceneToScreen( B3DHomMatrixToHomogenMatrix( createTransformationSceneToScreen( aVDiagram.getCurrentRectangle() ) )); pVCooSys->initVAxisInList(); } //calculate resulting size respecting axis label layout and fontscaling uno::Reference< drawing::XShape > xBoundingShape(rParam.mxDiagramWithAxesShapes, uno::UNO_QUERY); ::basegfx::B2IRectangle aConsumedOuterRect; //use first coosys only so far; todo: calculate for more than one coosys if we have more in future //todo: this is just a workaround at the moment for pie and donut labels if( !bIsPieOrDonut && (!rVCooSysList.empty()) ) { VCoordinateSystem* pVCooSys = rVCooSysList[0]; pVCooSys->createMaximumAxesLabels(); aConsumedOuterRect = AbstractShapeFactory::getRectangleOfShape(xBoundingShape); ::basegfx::B2IRectangle aNewInnerRect( aVDiagram.getCurrentRectangle() ); if (!rParam.mbUseFixedInnerSize) aNewInnerRect = aVDiagram.adjustInnerSize( aConsumedOuterRect ); pVCooSys->setTransformationSceneToScreen( B3DHomMatrixToHomogenMatrix( createTransformationSceneToScreen( aNewInnerRect ) )); //redo autoscaling to get size and text dependent automatic main increment count rParam.mpSeriesPlotterContainer->doAutoScaling( mrChartModel ); rParam.mpSeriesPlotterContainer->updateScalesAndIncrementsOnAxes(); rParam.mpSeriesPlotterContainer->setScalesFromCooSysToPlotter(); pVCooSys->createAxesLabels(); bool bLessSpaceConsumedThanExpected = false; { aConsumedOuterRect = AbstractShapeFactory::getRectangleOfShape(xBoundingShape); if( aConsumedOuterRect.getMinX() > aAvailableOuterRect.getMinX() || aConsumedOuterRect.getMaxX() < aAvailableOuterRect.getMaxX() || aConsumedOuterRect.getMinY() > aAvailableOuterRect.getMinY() || aConsumedOuterRect.getMinY() < aAvailableOuterRect.getMaxY() ) bLessSpaceConsumedThanExpected = true; } if (bLessSpaceConsumedThanExpected && !rParam.mbUseFixedInnerSize) { aVDiagram.adjustInnerSize( aConsumedOuterRect ); pVCooSys->setTransformationSceneToScreen( B3DHomMatrixToHomogenMatrix( createTransformationSceneToScreen( aVDiagram.getCurrentRectangle() ) )); } pVCooSys->updatePositions();//todo: logically this belongs to the condition above, but it seems also to be necessary to give the axes group shapes the right bounding rects for hit test - probably caused by bug i106183 -> check again if fixed } //create axes and grids for the final size for( nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; pVCooSys->setTransformationSceneToScreen( B3DHomMatrixToHomogenMatrix( createTransformationSceneToScreen( aVDiagram.getCurrentRectangle() ) )); pVCooSys->createAxesShapes(); pVCooSys->createGridShapes(); } // - create data series for all charttypes m_bPointsWereSkipped = false; SeriesPlottersType::iterator aPlotterIter = rSeriesPlotterList.begin(); const SeriesPlottersType::iterator aPlotterEnd = rSeriesPlotterList.end(); for( aPlotterIter = rSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { VSeriesPlotter* pSeriesPlotter = &(*aPlotterIter); OUString aCID; //III uno::Reference< drawing::XShapes > xSeriesTarget(0); if( pSeriesPlotter->WantToPlotInFrontOfAxisLine() ) xSeriesTarget = xSeriesTargetInFrontOfAxis; else { xSeriesTarget = xSeriesTargetBehindAxis; OSL_ENSURE( !bIsPieOrDonut, "not implemented yet! - during a complete recreation this shape is destroyed so no series can be created anymore" ); } pSeriesPlotter->initPlotter( xSeriesTarget,xTextTargetShapes,m_xShapeFactory,aCID ); pSeriesPlotter->setPageReferenceSize( rPageSize ); VCoordinateSystem* pVCooSys = lcl_getCooSysForPlotter( rVCooSysList, pSeriesPlotter ); if(2==nDimensionCount) pSeriesPlotter->setTransformationSceneToScreen( pVCooSys->getTransformationSceneToScreen() ); //better performance for big data awt::Size aCoordinateRegionResolution(1000,1000); { //calculate resolution for coordinate system Sequence aCoordinateSystemResolution = pVCooSys->getCoordinateSystemResolution( rPageSize, m_aPageResolution ); pSeriesPlotter->setCoordinateSystemResolution( aCoordinateSystemResolution ); } pSeriesPlotter->createShapes(); m_bPointsWereSkipped = m_bPointsWereSkipped || pSeriesPlotter->PointsWereSkipped(); } //recreate all with corrected sizes if requested if( bIsPieOrDonut ) { m_bPointsWereSkipped = false; aConsumedOuterRect = ::basegfx::B2IRectangle( AbstractShapeFactory::getRectangleOfShape(xBoundingShape) ); ::basegfx::B2IRectangle aNewInnerRect( aVDiagram.getCurrentRectangle() ); if (!rParam.mbUseFixedInnerSize) aNewInnerRect = aVDiagram.adjustInnerSize( aConsumedOuterRect ); for( aPlotterIter = rSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { VSeriesPlotter* pSeriesPlotter = &(*aPlotterIter); pSeriesPlotter->releaseShapes(); } //clear and recreate AbstractShapeFactory::removeSubShapes( xSeriesTargetInFrontOfAxis ); //xSeriesTargetBehindAxis is a sub shape of xSeriesTargetInFrontOfAxis and will be removed here xSeriesTargetBehindAxis.clear(); AbstractShapeFactory::removeSubShapes( xTextTargetShapes ); //set new transformation for( nC=0; nC < rVCooSysList.size(); nC++) { VCoordinateSystem* pVCooSys = rVCooSysList[nC]; pVCooSys->setTransformationSceneToScreen( B3DHomMatrixToHomogenMatrix( createTransformationSceneToScreen( aNewInnerRect ) )); } // - create data series for all charttypes for( aPlotterIter = rSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { VSeriesPlotter* pSeriesPlotter = &(*aPlotterIter); VCoordinateSystem* pVCooSys = lcl_getCooSysForPlotter( rVCooSysList, pSeriesPlotter ); if(2==nDimensionCount) pSeriesPlotter->setTransformationSceneToScreen( pVCooSys->getTransformationSceneToScreen() ); pSeriesPlotter->createShapes(); m_bPointsWereSkipped = m_bPointsWereSkipped || pSeriesPlotter->PointsWereSkipped(); } for( aPlotterIter = rSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) aPlotterIter->rearrangeLabelToAvoidOverlapIfRequested(rPageSize); } if (rParam.mbUseFixedInnerSize) { aUsedOuterRect = awt::Rectangle( aConsumedOuterRect.getMinX(), aConsumedOuterRect.getMinY(), aConsumedOuterRect.getWidth(), aConsumedOuterRect.getHeight() ); } else aUsedOuterRect = rParam.maRemainingSpace; bool bSnapRectToUsedArea = false; for( aPlotterIter = rSeriesPlotterList.begin(); aPlotterIter != aPlotterEnd; ++aPlotterIter ) { bSnapRectToUsedArea = aPlotterIter->shouldSnapRectToUsedArea(); if(bSnapRectToUsedArea) break; } if(bSnapRectToUsedArea) { if (rParam.mbUseFixedInnerSize) m_aResultingDiagramRectangleExcludingAxes = getRectangleOfObject( "PlotAreaExcludingAxes" ); else { ::basegfx::B2IRectangle aConsumedInnerRect = aVDiagram.getCurrentRectangle(); m_aResultingDiagramRectangleExcludingAxes = awt::Rectangle( aConsumedInnerRect.getMinX(), aConsumedInnerRect.getMinY(), aConsumedInnerRect.getWidth(), aConsumedInnerRect.getHeight() ); } } else { if (rParam.mbUseFixedInnerSize) m_aResultingDiagramRectangleExcludingAxes = rParam.maRemainingSpace; else { ::basegfx::B2IRectangle aConsumedInnerRect = aVDiagram.getCurrentRectangle(); m_aResultingDiagramRectangleExcludingAxes = awt::Rectangle( aConsumedInnerRect.getMinX(), aConsumedInnerRect.getMinY(), aConsumedInnerRect.getWidth(), aConsumedInnerRect.getHeight() ); } } if (rParam.mxMarkHandles.is()) { awt::Point aPos(rParam.maRemainingSpace.X, rParam.maRemainingSpace.Y); awt::Size aSize(rParam.maRemainingSpace.Width, rParam.maRemainingSpace.Height); bool bPosSizeExcludeAxesProperty = true; uno::Reference< beans::XPropertySet > xDiaProps( xDiagram, uno::UNO_QUERY_THROW ); if( xDiaProps.is() ) xDiaProps->getPropertyValue("PosSizeExcludeAxes") >>= bPosSizeExcludeAxesProperty; if (rParam.mbUseFixedInnerSize || bPosSizeExcludeAxesProperty) { aPos = awt::Point( m_aResultingDiagramRectangleExcludingAxes.X, m_aResultingDiagramRectangleExcludingAxes.Y ); aSize = awt::Size( m_aResultingDiagramRectangleExcludingAxes.Width, m_aResultingDiagramRectangleExcludingAxes.Height ); } rParam.mxMarkHandles->setPosition(aPos); rParam.mxMarkHandles->setSize(aSize); } return aUsedOuterRect; } bool ChartView::getExplicitValuesForAxis( uno::Reference< XAxis > xAxis , ExplicitScaleData& rExplicitScale , ExplicitIncrementData& rExplicitIncrement ) { impl_updateView(); if(!xAxis.is()) return false; uno::Reference< XCoordinateSystem > xCooSys( AxisHelper::getCoordinateSystemOfAxis(xAxis, mrChartModel.getFirstDiagram() ) ); const VCoordinateSystem* pVCooSys = findInCooSysList(m_aVCooSysList,xCooSys); if(!pVCooSys) return false; sal_Int32 nDimensionIndex=-1; sal_Int32 nAxisIndex=-1; if( AxisHelper::getIndicesForAxis( xAxis, xCooSys, nDimensionIndex, nAxisIndex ) ) { rExplicitScale = pVCooSys->getExplicitScale(nDimensionIndex,nAxisIndex); rExplicitIncrement = pVCooSys->getExplicitIncrement(nDimensionIndex,nAxisIndex); if( rExplicitScale.ShiftedCategoryPosition ) { //remove 'one' from max if( rExplicitScale.AxisType == ::com::sun::star::chart2::AxisType::DATE ) { Date aMaxDate(rExplicitScale.NullDate); aMaxDate += static_cast(::rtl::math::approxFloor(rExplicitScale.Maximum)); //for explicit scales with shifted categories we need one interval more switch( rExplicitScale.TimeResolution ) { case ::com::sun::star::chart::TimeUnit::DAY: --aMaxDate; break; case ::com::sun::star::chart::TimeUnit::MONTH: aMaxDate = DateHelper::GetDateSomeMonthsAway(aMaxDate,-1); break; case ::com::sun::star::chart::TimeUnit::YEAR: aMaxDate = DateHelper::GetDateSomeYearsAway(aMaxDate,-1); break; } rExplicitScale.Maximum = aMaxDate - rExplicitScale.NullDate; } else if( rExplicitScale.AxisType == ::com::sun::star::chart2::AxisType::CATEGORY ) rExplicitScale.Maximum -= 1.0; else if( rExplicitScale.AxisType == ::com::sun::star::chart2::AxisType::SERIES ) rExplicitScale.Maximum -= 1.0; } return true; } return false; } SdrPage* ChartView::getSdrPage() { SdrPage* pPage=0; Reference< lang::XUnoTunnel> xUnoTunnel(m_xDrawPage,uno::UNO_QUERY); if(xUnoTunnel.is()) { SvxDrawPage* pSvxDrawPage = reinterpret_cast(xUnoTunnel->getSomething( SvxDrawPage::getUnoTunnelId() )); if(pSvxDrawPage) { pPage = pSvxDrawPage->GetSdrPage(); } } return pPage; } uno::Reference< drawing::XShape > ChartView::getShapeForCID( const OUString& rObjectCID ) { SolarMutexGuard aSolarGuard; SdrObject* pObj = DrawModelWrapper::getNamedSdrObject( rObjectCID, this->getSdrPage() ); if( pObj ) return uno::Reference< drawing::XShape >( pObj->getUnoShape(), uno::UNO_QUERY); return 0; } awt::Rectangle ChartView::getDiagramRectangleExcludingAxes() { impl_updateView(); return m_aResultingDiagramRectangleExcludingAxes; } awt::Rectangle ChartView::getRectangleOfObject( const OUString& rObjectCID, bool bSnapRect ) { impl_updateView(); awt::Rectangle aRet; uno::Reference< drawing::XShape > xShape( getShapeForCID(rObjectCID) ); if(xShape.is()) { //special handling for axis for old api: //same special handling for diagram ObjectType eObjectType( ObjectIdentifier::getObjectType( rObjectCID ) ); if( eObjectType == OBJECTTYPE_AXIS || eObjectType == OBJECTTYPE_DIAGRAM ) { SolarMutexGuard aSolarGuard; SvxShape* pRoot = SvxShape::getImplementation( xShape ); if( pRoot ) { SdrObject* pRootSdrObject = pRoot->GetSdrObject(); if( pRootSdrObject ) { SdrObjList* pRootList = pRootSdrObject->GetSubList(); if( pRootList ) { OUString aShapeName = "MarkHandles"; if( eObjectType == OBJECTTYPE_DIAGRAM ) aShapeName = "PlotAreaIncludingAxes"; SdrObject* pShape = DrawModelWrapper::getNamedSdrObject( aShapeName, pRootList ); if( pShape ) xShape = uno::Reference< drawing::XShape >( pShape->getUnoShape(), uno::UNO_QUERY); } } } } awt::Size aSize( xShape->getSize() ); awt::Point aPoint( xShape->getPosition() ); aRet = awt::Rectangle( aPoint.X, aPoint.Y, aSize.Width, aSize.Height ); if( bSnapRect ) { //for rotated objects the shape size and position differs from the visible rectangle SvxShape* pShape = SvxShape::getImplementation( xShape ); if( pShape ) { SdrObject* pSdrObject = pShape->GetSdrObject(); if( pSdrObject ) { Rectangle aSnapRect( pSdrObject->GetSnapRect() ); aRet = awt::Rectangle(aSnapRect.Left(),aSnapRect.Top(),aSnapRect.GetWidth(),aSnapRect.GetHeight()); } } } } return aRet; } ::boost::shared_ptr< DrawModelWrapper > ChartView::getDrawModelWrapper() { return m_pDrawModelWrapper; } namespace { inline sal_Int32 lcl_getDiagramTitleSpace() { return 200; //=0,2 cm spacing } bool lcl_getPropertySwapXAndYAxis( const uno::Reference< XDiagram >& xDiagram ) { bool bSwapXAndY = false; uno::Reference< XCoordinateSystemContainer > xCooSysContainer( xDiagram, uno::UNO_QUERY ); if( xCooSysContainer.is() ) { uno::Sequence< uno::Reference< XCoordinateSystem > > aCooSysList( xCooSysContainer->getCoordinateSystems() ); if( aCooSysList.getLength() ) { uno::Reference xProp(aCooSysList[0], uno::UNO_QUERY ); if( xProp.is()) try { xProp->getPropertyValue( "SwapXAndYAxis" ) >>= bSwapXAndY; } catch( const uno::Exception& e ) { ASSERT_EXCEPTION( e ); } } } return bSwapXAndY; } } sal_Int32 ExplicitValueProvider::getExplicitNumberFormatKeyForAxis( const Reference< chart2::XAxis >& xAxis , const Reference< chart2::XCoordinateSystem > & xCorrespondingCoordinateSystem , const Reference& xChartDoc) { return AxisHelper::getExplicitNumberFormatKeyForAxis( xAxis, xCorrespondingCoordinateSystem, xChartDoc , true /*bSearchForParallelAxisIfNothingIsFound*/ ); } sal_Int32 ExplicitValueProvider::getExplicitNumberFormatKeyForDataLabel( const uno::Reference< beans::XPropertySet >& xSeriesOrPointProp, const uno::Reference< XDataSeries >& xSeries, sal_Int32 nPointIndex /*-1 for whole series*/, const uno::Reference< XDiagram >& xDiagram ) { sal_Int32 nFormat=0; if( !xSeriesOrPointProp.is() ) return nFormat; bool bLinkToSource = true; try { xSeriesOrPointProp->getPropertyValue(CHART_UNONAME_LINK_TO_SRC_NUMFMT) >>= bLinkToSource; } catch ( const beans::UnknownPropertyException& ) {} xSeriesOrPointProp->getPropertyValue(CHART_UNONAME_NUMFMT) >>= nFormat; sal_Int32 nOldFormat = nFormat; if (bLinkToSource) { uno::Reference< chart2::XChartType > xChartType( DataSeriesHelper::getChartTypeOfSeries( xSeries, xDiagram ) ); bool bFormatFound = false; if( ChartTypeHelper::shouldLabelNumberFormatKeyBeDetectedFromYAxis( xChartType ) ) { uno::Reference< beans::XPropertySet > xAttachedAxisProps( DiagramHelper::getAttachedAxis( xSeries, xDiagram ), uno::UNO_QUERY ); if (xAttachedAxisProps.is() && (xAttachedAxisProps->getPropertyValue(CHART_UNONAME_NUMFMT) >>= nFormat)) bFormatFound = true; } if( !bFormatFound ) { Reference< chart2::data::XDataSource > xSeriesSource( xSeries, uno::UNO_QUERY ); OUString aRole( ChartTypeHelper::getRoleOfSequenceForDataLabelNumberFormatDetection( xChartType ) ); Reference< data::XLabeledDataSequence > xLabeledSequence( DataSeriesHelper::getDataSequenceByRole( xSeriesSource, aRole, false )); if( xLabeledSequence.is() ) { Reference< data::XDataSequence > xValues( xLabeledSequence->getValues() ); if( xValues.is() ) nFormat = xValues->getNumberFormatKeyByIndex( nPointIndex ); } } if (nFormat >= 0 && nOldFormat != nFormat) xSeriesOrPointProp->setPropertyValue(CHART_UNONAME_NUMFMT, uno::makeAny(nFormat)); } if(nFormat<0) nFormat=0; return nFormat; } sal_Int32 ExplicitValueProvider::getExplicitPercentageNumberFormatKeyForDataLabel( const uno::Reference< beans::XPropertySet >& xSeriesOrPointProp, const uno::Reference< util::XNumberFormatsSupplier >& xNumberFormatsSupplier ) { sal_Int32 nFormat=0; if( !xSeriesOrPointProp.is() ) return nFormat; if( !(xSeriesOrPointProp->getPropertyValue("PercentageNumberFormat") >>= nFormat) ) { nFormat = DiagramHelper::getPercentNumberFormat( xNumberFormatsSupplier ); } if(nFormat<0) nFormat=0; return nFormat; } awt::Rectangle ExplicitValueProvider::addAxisTitleSizes( ChartModel& rModel , const Reference< uno::XInterface >& xChartView , const awt::Rectangle& rExcludingPositionAndSize ) { awt::Rectangle aRet(rExcludingPositionAndSize); //add axis title sizes to the diagram size uno::Reference< chart2::XTitle > xTitle_Height( TitleHelper::getTitle( TitleHelper::TITLE_AT_STANDARD_X_AXIS_POSITION, rModel ) ); uno::Reference< chart2::XTitle > xTitle_Width( TitleHelper::getTitle( TitleHelper::TITLE_AT_STANDARD_Y_AXIS_POSITION, rModel ) ); uno::Reference< chart2::XTitle > xSecondTitle_Height( TitleHelper::getTitle( TitleHelper::SECONDARY_X_AXIS_TITLE, rModel ) ); uno::Reference< chart2::XTitle > xSecondTitle_Width( TitleHelper::getTitle( TitleHelper::SECONDARY_Y_AXIS_TITLE, rModel ) ); if( xTitle_Height.is() || xTitle_Width.is() || xSecondTitle_Height.is() || xSecondTitle_Width.is() ) { ExplicitValueProvider* pExplicitValueProvider = ExplicitValueProvider::getExplicitValueProvider(xChartView); if( pExplicitValueProvider ) { //detect whether x axis points into x direction or not if( lcl_getPropertySwapXAndYAxis( rModel.getFirstDiagram() ) ) { std::swap( xTitle_Height, xTitle_Width ); std::swap( xSecondTitle_Height, xSecondTitle_Width ); } sal_Int32 nTitleSpaceWidth = 0; sal_Int32 nTitleSpaceHeight = 0; sal_Int32 nSecondTitleSpaceWidth = 0; sal_Int32 nSecondTitleSpaceHeight = 0; if( xTitle_Height.is() ) { OUString aCID_X( ObjectIdentifier::createClassifiedIdentifierForObject( xTitle_Height, rModel ) ); nTitleSpaceHeight = pExplicitValueProvider->getRectangleOfObject( aCID_X, true ).Height; if( nTitleSpaceHeight ) nTitleSpaceHeight+=lcl_getDiagramTitleSpace(); } if( xTitle_Width.is() ) { OUString aCID_Y( ObjectIdentifier::createClassifiedIdentifierForObject( xTitle_Width, rModel ) ); nTitleSpaceWidth = pExplicitValueProvider->getRectangleOfObject( aCID_Y, true ).Width; if(nTitleSpaceWidth) nTitleSpaceWidth+=lcl_getDiagramTitleSpace(); } if( xSecondTitle_Height.is() ) { OUString aCID_X( ObjectIdentifier::createClassifiedIdentifierForObject( xSecondTitle_Height, rModel ) ); nSecondTitleSpaceHeight = pExplicitValueProvider->getRectangleOfObject( aCID_X, true ).Height; if( nSecondTitleSpaceHeight ) nSecondTitleSpaceHeight+=lcl_getDiagramTitleSpace(); } if( xSecondTitle_Width.is() ) { OUString aCID_Y( ObjectIdentifier::createClassifiedIdentifierForObject( xSecondTitle_Width, rModel ) ); nSecondTitleSpaceWidth += pExplicitValueProvider->getRectangleOfObject( aCID_Y, true ).Width; if( nSecondTitleSpaceWidth ) nSecondTitleSpaceWidth+=lcl_getDiagramTitleSpace(); } aRet.X -= nTitleSpaceWidth; aRet.Y -= nSecondTitleSpaceHeight; aRet.Width += nTitleSpaceWidth + nSecondTitleSpaceWidth; aRet.Height += nTitleSpaceHeight + nSecondTitleSpaceHeight; } } return aRet; } awt::Rectangle ExplicitValueProvider::substractAxisTitleSizes( ChartModel& rModel , const Reference< uno::XInterface >& xChartView , const awt::Rectangle& rPositionAndSizeIncludingTitles ) { awt::Rectangle aRet(rPositionAndSizeIncludingTitles); //add axis title sizes to the diagram size uno::Reference< chart2::XTitle > xTitle_Height( TitleHelper::getTitle( TitleHelper::TITLE_AT_STANDARD_X_AXIS_POSITION, rModel ) ); uno::Reference< chart2::XTitle > xTitle_Width( TitleHelper::getTitle( TitleHelper::TITLE_AT_STANDARD_Y_AXIS_POSITION, rModel ) ); uno::Reference< chart2::XTitle > xSecondTitle_Height( TitleHelper::getTitle( TitleHelper::SECONDARY_X_AXIS_TITLE, rModel ) ); uno::Reference< chart2::XTitle > xSecondTitle_Width( TitleHelper::getTitle( TitleHelper::SECONDARY_Y_AXIS_TITLE, rModel ) ); if( xTitle_Height.is() || xTitle_Width.is() || xSecondTitle_Height.is() || xSecondTitle_Width.is() ) { ExplicitValueProvider* pExplicitValueProvider = ExplicitValueProvider::getExplicitValueProvider(xChartView); if( pExplicitValueProvider ) { //detect whether x axis points into x direction or not if( lcl_getPropertySwapXAndYAxis( rModel.getFirstDiagram() ) ) { std::swap( xTitle_Height, xTitle_Width ); std::swap( xSecondTitle_Height, xSecondTitle_Width ); } sal_Int32 nTitleSpaceWidth = 0; sal_Int32 nTitleSpaceHeight = 0; sal_Int32 nSecondTitleSpaceWidth = 0; sal_Int32 nSecondTitleSpaceHeight = 0; if( xTitle_Height.is() ) { OUString aCID_X( ObjectIdentifier::createClassifiedIdentifierForObject( xTitle_Height, rModel ) ); nTitleSpaceHeight = pExplicitValueProvider->getRectangleOfObject( aCID_X, true ).Height; if( nTitleSpaceHeight ) nTitleSpaceHeight+=lcl_getDiagramTitleSpace(); } if( xTitle_Width.is() ) { OUString aCID_Y( ObjectIdentifier::createClassifiedIdentifierForObject( xTitle_Width, rModel ) ); nTitleSpaceWidth = pExplicitValueProvider->getRectangleOfObject( aCID_Y, true ).Width; if(nTitleSpaceWidth) nTitleSpaceWidth+=lcl_getDiagramTitleSpace(); } if( xSecondTitle_Height.is() ) { OUString aCID_X( ObjectIdentifier::createClassifiedIdentifierForObject( xSecondTitle_Height, rModel ) ); nSecondTitleSpaceHeight = pExplicitValueProvider->getRectangleOfObject( aCID_X, true ).Height; if( nSecondTitleSpaceHeight ) nSecondTitleSpaceHeight+=lcl_getDiagramTitleSpace(); } if( xSecondTitle_Width.is() ) { OUString aCID_Y( ObjectIdentifier::createClassifiedIdentifierForObject( xSecondTitle_Width, rModel ) ); nSecondTitleSpaceWidth += pExplicitValueProvider->getRectangleOfObject( aCID_Y, true ).Width; if( nSecondTitleSpaceWidth ) nSecondTitleSpaceWidth+=lcl_getDiagramTitleSpace(); } aRet.X += nTitleSpaceWidth; aRet.Y += nSecondTitleSpaceHeight; aRet.Width -= (nTitleSpaceWidth + nSecondTitleSpaceWidth); aRet.Height -= (nTitleSpaceHeight + nSecondTitleSpaceHeight); } } return aRet; } namespace { inline double lcl_getPageLayoutDistancePercentage() { return 0.02; } bool getAvailablePosAndSizeForDiagram( CreateShapeParam2D& rParam, const awt::Size & rPageSize, const uno::Reference& xDiagram ) { rParam.mbUseFixedInnerSize = false; //@todo: we need a size dependent on the axis labels sal_Int32 nYDistance = static_cast(rPageSize.Height*lcl_getPageLayoutDistancePercentage()); sal_Int32 nXDistance = static_cast(rPageSize.Width*lcl_getPageLayoutDistancePercentage()); rParam.maRemainingSpace.X += nXDistance; rParam.maRemainingSpace.Width -= 2*nXDistance; rParam.maRemainingSpace.Y += nYDistance; rParam.maRemainingSpace.Height -= 2*nYDistance; if (rParam.maRemainingSpace.Width <= 0 || rParam.maRemainingSpace.Height <= 0) return false; uno::Reference< beans::XPropertySet > xProp(xDiagram, uno::UNO_QUERY); bool bPosSizeExcludeAxes = false; if( xProp.is() ) xProp->getPropertyValue( "PosSizeExcludeAxes" ) >>= bPosSizeExcludeAxes; //size: ::com::sun::star::chart2::RelativeSize aRelativeSize; if( xProp.is() && (xProp->getPropertyValue( "RelativeSize" )>>=aRelativeSize) ) { rParam.maRemainingSpace.Height = static_cast(aRelativeSize.Secondary*rPageSize.Height); rParam.maRemainingSpace.Width = static_cast(aRelativeSize.Primary*rPageSize.Width); rParam.mbUseFixedInnerSize = bPosSizeExcludeAxes; } //position: chart2::RelativePosition aRelativePosition; if( xProp.is() && (xProp->getPropertyValue( "RelativePosition" )>>=aRelativePosition) ) { //@todo decide whether x is primary or secondary //the coordinates re relative to the page double fX = aRelativePosition.Primary*rPageSize.Width; double fY = aRelativePosition.Secondary*rPageSize.Height; awt::Point aPos = RelativePositionHelper::getUpperLeftCornerOfAnchoredObject( awt::Point(static_cast(fX),static_cast(fY)), awt::Size(rParam.maRemainingSpace.Width, rParam.maRemainingSpace.Height), aRelativePosition.Anchor); rParam.maRemainingSpace.X = aPos.X; rParam.maRemainingSpace.Y = aPos.Y; rParam.mbUseFixedInnerSize = bPosSizeExcludeAxes; } //ensure that the diagram does not lap out right side or out of bottom if (rParam.maRemainingSpace.Y + rParam.maRemainingSpace.Height > rPageSize.Height) rParam.maRemainingSpace.Height = rPageSize.Height - rParam.maRemainingSpace.Y; if (rParam.maRemainingSpace.X + rParam.maRemainingSpace.Width > rPageSize.Width) rParam.maRemainingSpace.Width = rPageSize.Width - rParam.maRemainingSpace.X; return true; } enum TitleAlignment { ALIGN_LEFT, ALIGN_TOP, ALIGN_RIGHT, ALIGN_BOTTOM, ALIGN_Z }; void changePositionOfAxisTitle( VTitle* pVTitle, TitleAlignment eAlignment , awt::Rectangle& rDiagramPlusAxesRect, const awt::Size & rPageSize ) { if(!pVTitle) return; awt::Point aNewPosition(0,0); awt::Size aTitleSize = pVTitle->getFinalSize(); sal_Int32 nYDistance = static_cast(rPageSize.Height*lcl_getPageLayoutDistancePercentage()); sal_Int32 nXDistance = static_cast(rPageSize.Width*lcl_getPageLayoutDistancePercentage()); switch( eAlignment ) { case ALIGN_TOP: aNewPosition = awt::Point( rDiagramPlusAxesRect.X + rDiagramPlusAxesRect.Width/2 , rDiagramPlusAxesRect.Y - aTitleSize.Height/2 - nYDistance ); break; case ALIGN_BOTTOM: aNewPosition = awt::Point( rDiagramPlusAxesRect.X + rDiagramPlusAxesRect.Width/2 , rDiagramPlusAxesRect.Y + rDiagramPlusAxesRect.Height + aTitleSize.Height/2 + nYDistance ); break; case ALIGN_LEFT: aNewPosition = awt::Point( rDiagramPlusAxesRect.X - aTitleSize.Width/2 - nXDistance , rDiagramPlusAxesRect.Y + rDiagramPlusAxesRect.Height/2 ); break; case ALIGN_RIGHT: aNewPosition = awt::Point( rDiagramPlusAxesRect.X + rDiagramPlusAxesRect.Width + aTitleSize.Width/2 + nXDistance , rDiagramPlusAxesRect.Y + rDiagramPlusAxesRect.Height/2 ); break; case ALIGN_Z: aNewPosition = awt::Point( rDiagramPlusAxesRect.X + rDiagramPlusAxesRect.Width + aTitleSize.Width/2 + nXDistance , rDiagramPlusAxesRect.Y + rDiagramPlusAxesRect.Height - aTitleSize.Height/2 ); break; default: break; } sal_Int32 nMaxY = rPageSize.Height - aTitleSize.Height/2; sal_Int32 nMaxX = rPageSize.Width - aTitleSize.Width/2; sal_Int32 nMinX = aTitleSize.Width/2; sal_Int32 nMinY = aTitleSize.Height/2; if( aNewPosition.Y > nMaxY ) aNewPosition.Y = nMaxY; if( aNewPosition.X > nMaxX ) aNewPosition.X = nMaxX; if( aNewPosition.Y < nMinY ) aNewPosition.Y = nMinY; if( aNewPosition.X < nMinX ) aNewPosition.X = nMinX; pVTitle->changePosition( aNewPosition ); } boost::shared_ptr lcl_createTitle( TitleHelper::eTitleType eType , const uno::Reference< drawing::XShapes>& xPageShapes , const uno::Reference< lang::XMultiServiceFactory>& xShapeFactory , ChartModel& rModel , awt::Rectangle& rRemainingSpace , const awt::Size & rPageSize , TitleAlignment eAlignment , bool& rbAutoPosition ) { boost::shared_ptr apVTitle; // #i109336# Improve auto positioning in chart double fPercentage = lcl_getPageLayoutDistancePercentage(); sal_Int32 nXDistance = static_cast< sal_Int32 >( rPageSize.Width * fPercentage ); sal_Int32 nYDistance = static_cast< sal_Int32 >( rPageSize.Height * fPercentage ); if ( eType == TitleHelper::MAIN_TITLE ) { sal_Int32 nYOffset = 135; // 1/100 mm nYDistance += nYOffset; } else if ( eType == TitleHelper::TITLE_AT_STANDARD_X_AXIS_POSITION ) { sal_Int32 nYOffset = 420; // 1/100 mm nYDistance = nYOffset; } else if ( eType == TitleHelper::TITLE_AT_STANDARD_Y_AXIS_POSITION ) { sal_Int32 nXOffset = 450; // 1/100 mm nXDistance = nXOffset; } uno::Reference< XTitle > xTitle( TitleHelper::getTitle( eType, rModel ) ); OUString aCompleteString = TitleHelper::getCompleteString(xTitle); if (aCompleteString.isEmpty()) return apVTitle; //create title apVTitle.reset(new VTitle(xTitle)); OUString aCID = ObjectIdentifier::createClassifiedIdentifierForObject(xTitle, rModel); apVTitle->init(xPageShapes, xShapeFactory, aCID); apVTitle->createShapes(awt::Point(0,0), rPageSize); awt::Size aTitleUnrotatedSize = apVTitle->getUnrotatedSize(); awt::Size aTitleSize = apVTitle->getFinalSize(); //position rbAutoPosition = true; awt::Point aNewPosition(0,0); chart2::RelativePosition aRelativePosition; uno::Reference xProp(xTitle, uno::UNO_QUERY); if (xProp.is() && (xProp->getPropertyValue("RelativePosition") >>= aRelativePosition)) { rbAutoPosition = false; //@todo decide whether x is primary or secondary double fX = aRelativePosition.Primary*rPageSize.Width; double fY = aRelativePosition.Secondary*rPageSize.Height; double fAnglePi = apVTitle->getRotationAnglePi(); aNewPosition = RelativePositionHelper::getCenterOfAnchoredObject( awt::Point(static_cast(fX),static_cast(fY)) , aTitleUnrotatedSize, aRelativePosition.Anchor, fAnglePi ); } else //auto position { switch( eAlignment ) { case ALIGN_TOP: aNewPosition = awt::Point( rRemainingSpace.X + rRemainingSpace.Width/2 , rRemainingSpace.Y + aTitleSize.Height/2 + nYDistance ); break; case ALIGN_BOTTOM: aNewPosition = awt::Point( rRemainingSpace.X + rRemainingSpace.Width/2 , rRemainingSpace.Y + rRemainingSpace.Height - aTitleSize.Height/2 - nYDistance ); break; case ALIGN_LEFT: aNewPosition = awt::Point( rRemainingSpace.X + aTitleSize.Width/2 + nXDistance , rRemainingSpace.Y + rRemainingSpace.Height/2 ); break; case ALIGN_RIGHT: aNewPosition = awt::Point( rRemainingSpace.X + rRemainingSpace.Width - aTitleSize.Width/2 - nXDistance , rRemainingSpace.Y + rRemainingSpace.Height/2 ); break; default: break; } } apVTitle->changePosition( aNewPosition ); //remaining space switch( eAlignment ) { case ALIGN_TOP: // Push the remaining space down from top. rRemainingSpace.Y += ( aTitleSize.Height + nYDistance ); rRemainingSpace.Height -= ( aTitleSize.Height + nYDistance ); break; case ALIGN_BOTTOM: // Push the remaining space up from bottom. rRemainingSpace.Height -= ( aTitleSize.Height + nYDistance ); break; case ALIGN_LEFT: // Push the remaining space to the right from left edge. rRemainingSpace.X += ( aTitleSize.Width + nXDistance ); rRemainingSpace.Width -= ( aTitleSize.Width + nXDistance ); break; case ALIGN_RIGHT: // Push the remaining space to the left from right edge. rRemainingSpace.Width -= ( aTitleSize.Width + nXDistance ); break; default: break; } return apVTitle; } bool lcl_createLegend( const uno::Reference< XLegend > & xLegend , const uno::Reference< drawing::XShapes>& xPageShapes , const uno::Reference< lang::XMultiServiceFactory>& xShapeFactory , const uno::Reference< uno::XComponentContext > & xContext , awt::Rectangle & rRemainingSpace , const awt::Size & rPageSize , ChartModel& rModel , const std::vector< LegendEntryProvider* >& rLegendEntryProviderList , sal_Int16 nDefaultWritingMode ) { if (!VLegend::isVisible(xLegend)) return false; VLegend aVLegend( xLegend, xContext, rLegendEntryProviderList, xPageShapes, xShapeFactory, rModel); aVLegend.setDefaultWritingMode( nDefaultWritingMode ); aVLegend.createShapes( awt::Size( rRemainingSpace.Width, rRemainingSpace.Height ), rPageSize ); aVLegend.changePosition( rRemainingSpace, rPageSize ); return true; } void formatPage( ChartModel& rChartModel , const awt::Size& rPageSize , const uno::Reference< drawing::XShapes >& xTarget , const uno::Reference< lang::XMultiServiceFactory>& xShapeFactory ) { try { uno::Reference< beans::XPropertySet > xModelPage( rChartModel.getPageBackground()); if( ! xModelPage.is()) return; if( !xShapeFactory.is() ) return; //format page tPropertyNameValueMap aNameValueMap; PropertyMapper::getValueMap( aNameValueMap, PropertyMapper::getPropertyNameMapForFillAndLineProperties(), xModelPage ); OUString aCID( ObjectIdentifier::createClassifiedIdentifier( OBJECTTYPE_PAGE, OUString() ) ); aNameValueMap.insert( tPropertyNameValueMap::value_type( "Name", uno::makeAny( aCID ) ) ); //CID OUString tNameSequence aNames; tAnySequence aValues; PropertyMapper::getMultiPropertyListsFromValueMap( aNames, aValues, aNameValueMap ); AbstractShapeFactory* pShapeFactory = AbstractShapeFactory::getOrCreateShapeFactory(xShapeFactory); pShapeFactory->createRectangle( xTarget, rPageSize, awt::Point(0, 0), aNames, aValues); } catch( const uno::Exception & ex ) { ASSERT_EXCEPTION( ex ); } } void lcl_removeEmptyGroupShapes( const Reference< drawing::XShapes>& xParent ) { if(!xParent.is()) return; Reference< drawing::XShapeGroup > xParentGroup( xParent, uno::UNO_QUERY ); if( !xParentGroup.is() ) { Reference< drawing::XDrawPage > xPage( xParent, uno::UNO_QUERY ); if( !xPage.is() ) return; } //iterate from back! for( sal_Int32 nN = xParent->getCount(); nN--; ) { uno::Any aAny = xParent->getByIndex( nN ); Reference< drawing::XShapes> xShapes(0); if( aAny >>= xShapes ) lcl_removeEmptyGroupShapes( xShapes ); if( xShapes.is() && xShapes->getCount()==0 ) { //remove empty group shape Reference< drawing::XShapeGroup > xGroup( xShapes, uno::UNO_QUERY ); Reference< drawing::XShape > xShape( xShapes, uno::UNO_QUERY ); if( xGroup.is() ) xParent->remove( xShape ); } } } } void ChartView::impl_refreshAddIn() { if( !m_bRefreshAddIn ) return; uno::Reference< beans::XPropertySet > xProp( static_cast< ::cppu::OWeakObject* >( &mrChartModel ), uno::UNO_QUERY ); if( xProp.is()) try { uno::Reference< util::XRefreshable > xAddIn; xProp->getPropertyValue( "AddIn" ) >>= xAddIn; if( xAddIn.is() ) { bool bRefreshAddInAllowed = true; xProp->getPropertyValue( "RefreshAddInAllowed" ) >>= bRefreshAddInAllowed; if( bRefreshAddInAllowed ) xAddIn->refresh(); } } catch( const uno::Exception& e ) { ASSERT_EXCEPTION( e ); } } /** * Is it a real 3D chart with a true 3D scene or a 3D chart in a 2D scene. */ bool ChartView::isReal3DChart() { uno::Reference< XDiagram > xDiagram( mrChartModel.getFirstDiagram() ); return ChartHelper::isGL3DDiagram(xDiagram); } static const char* envChartDummyFactory = getenv("CHART_DUMMY_FACTORY"); void ChartView::createShapes() { osl::ResettableMutexGuard aTimedGuard(maTimeMutex); if(mrChartModel.isTimeBased()) { maTimeBased.bTimeBased = true; } //make sure add-in is refreshed after creating the shapes const ::comphelper::ScopeGuard aGuard( boost::bind( &ChartView::impl_refreshAddIn, this ) ); m_aResultingDiagramRectangleExcludingAxes = awt::Rectangle(0,0,0,0); impl_deleteCoordinateSystems(); if( m_pDrawModelWrapper ) { SolarMutexGuard aSolarGuard; // #i12587# support for shapes in chart m_pDrawModelWrapper->getSdrModel().EnableUndo( false ); m_pDrawModelWrapper->clearMainDrawPage(); } lcl_setDefaultWritingMode( m_pDrawModelWrapper, mrChartModel ); awt::Size aPageSize = mrChartModel.getVisualAreaSize( embed::Aspects::MSOLE_CONTENT ); AbstractShapeFactory* pShapeFactory = AbstractShapeFactory::getOrCreateShapeFactory(m_xShapeFactory); if(!mxRootShape.is()) mxRootShape = pShapeFactory->getOrCreateChartRootShape( m_xDrawPage ); SdrPage* pPage = ChartView::getSdrPage(); if(pPage) //it is necessary to use the implementation here as the uno page does not provide a propertyset pPage->SetSize(Size(aPageSize.Width,aPageSize.Height)); else { OSL_FAIL("could not set page size correctly"); } pShapeFactory->setPageSize(mxRootShape, aPageSize); pShapeFactory->clearPage(mxRootShape); #if HAVE_FEATURE_DESKTOP if(isReal3DChart()) { createShapes3D(); return; } else { m_pGL3DPlotter.reset(); // hide OpenGL window for now in normal charts OpenGLWindow* pWindow = mrChartModel.getOpenGLWindow(); if(pWindow && !envChartDummyFactory) pWindow->Show(false); } #endif createShapes2D(aPageSize); // #i12587# support for shapes in chart if ( m_pDrawModelWrapper ) { SolarMutexGuard aSolarGuard; m_pDrawModelWrapper->getSdrModel().EnableUndo( true ); } if(maTimeBased.bTimeBased) { maTimeBased.nFrame++; } } void ChartView::render() { if(!isReal3DChart()) { AbstractShapeFactory* pShapeFactory = AbstractShapeFactory::getOrCreateShapeFactory(m_xShapeFactory); OpenGLWindow* pWindow = mrChartModel.getOpenGLWindow(); if(pWindow) pWindow->setRenderer(mp2DRenderer.get()); bool bRender = pShapeFactory->preRender(mxRootShape, pWindow); if(bRender) { pShapeFactory->render(mxRootShape, pWindow != mp2DRenderer->getOpenGLWindow()); pShapeFactory->postRender(pWindow); } } } // util::XEventListener (base of XCloseListener) void SAL_CALL ChartView::disposing( const lang::EventObject& /* rSource */ ) throw(uno::RuntimeException, std::exception) { } void ChartView::impl_updateView( bool bCheckLockedCtrler ) { if( !m_pDrawModelWrapper ) return; // #i12587# support for shapes in chart if ( m_bSdrViewIsInEditMode ) { return; } if (bCheckLockedCtrler && mrChartModel.hasControllersLocked()) return; if( m_bViewDirty && !m_bInViewUpdate ) { m_bInViewUpdate = true; //bool bOldRefreshAddIn = m_bRefreshAddIn; //m_bRefreshAddIn = false; try { impl_notifyModeChangeListener("invalid"); //prepare draw model { SolarMutexGuard aSolarGuard; m_pDrawModelWrapper->lockControllers(); } //create chart view { m_bViewDirty = false; m_bViewUpdatePending = false; createShapes(); if( m_bViewDirty ) { //avoid recursions due to add-in m_bRefreshAddIn = false; m_bViewDirty = false; m_bViewUpdatePending = false; //delete old chart view createShapes(); m_bRefreshAddIn = true; } } m_bViewDirty = m_bViewUpdatePending; m_bViewUpdatePending = false; m_bInViewUpdate = false; } catch( const uno::Exception& ex) { m_bViewDirty = m_bViewUpdatePending; m_bViewUpdatePending = false; m_bInViewUpdate = false; ASSERT_EXCEPTION( ex ); } { SolarMutexGuard aSolarGuard; m_pDrawModelWrapper->unlockControllers(); } impl_notifyModeChangeListener("valid"); //m_bRefreshAddIn = bOldRefreshAddIn; } } // ____ XModifyListener ____ void SAL_CALL ChartView::modified( const lang::EventObject& /* aEvent */ ) throw (uno::RuntimeException, std::exception) { m_bViewDirty = true; if( m_bInViewUpdate ) m_bViewUpdatePending = true; impl_notifyModeChangeListener("dirty"); } //SfxListener void ChartView::Notify( SfxBroadcaster& /*rBC*/, const SfxHint& rHint ) { //#i77362 change notification for changes on additional shapes are missing if( m_bInViewUpdate ) return; // #i12587# support for shapes in chart if ( m_bSdrViewIsInEditMode ) { uno::Reference< view::XSelectionSupplier > xSelectionSupplier( mrChartModel.getCurrentController(), uno::UNO_QUERY ); if ( xSelectionSupplier.is() ) { OUString aSelObjCID; uno::Any aSelObj( xSelectionSupplier->getSelection() ); aSelObj >>= aSelObjCID; if ( !aSelObjCID.isEmpty() ) { return; } } } const SdrHint* pSdrHint = dynamic_cast< const SdrHint* >(&rHint); if( !pSdrHint ) return; bool bShapeChanged = false; switch( pSdrHint->GetKind() ) { case HINT_OBJCHG: bShapeChanged = true; break; case HINT_OBJINSERTED: bShapeChanged = true; break; case HINT_OBJREMOVED: bShapeChanged = true; break; case HINT_MODELCLEARED: bShapeChanged = true; break; case HINT_ENDEDIT: bShapeChanged = true; break; default: break; } if(bShapeChanged) { //#i76053# do not send view modified notifications for changes on the hidden page which contains e.g. the symbols for the dialogs if( ChartView::getSdrPage() != pSdrHint->GetPage() ) bShapeChanged=false; } if(!bShapeChanged) return; mrChartModel.setModified(sal_True); } void ChartView::impl_notifyModeChangeListener( const OUString& rNewMode ) { try { ::cppu::OInterfaceContainerHelper* pIC = m_aListenerContainer .getContainer( cppu::UnoType::get()); if( pIC ) { util::ModeChangeEvent aEvent( static_cast< uno::XWeak* >( this ), rNewMode ); ::cppu::OInterfaceIteratorHelper aIt( *pIC ); while( aIt.hasMoreElements() ) { uno::Reference< util::XModeChangeListener > xListener( aIt.next(), uno::UNO_QUERY ); if( xListener.is() ) xListener->modeChanged( aEvent ); } } } catch( const uno::Exception& ex) { ASSERT_EXCEPTION( ex ); } } // ____ XModeChangeBroadcaster ____ void SAL_CALL ChartView::addModeChangeListener( const uno::Reference< util::XModeChangeListener >& xListener ) throw (uno::RuntimeException, std::exception) { m_aListenerContainer.addInterface( cppu::UnoType::get(), xListener ); } void SAL_CALL ChartView::removeModeChangeListener( const uno::Reference< util::XModeChangeListener >& xListener ) throw (uno::RuntimeException, std::exception) { m_aListenerContainer.removeInterface( cppu::UnoType::get(), xListener ); } void SAL_CALL ChartView::addModeChangeApproveListener( const uno::Reference< util::XModeChangeApproveListener >& /* _rxListener */ ) throw (lang::NoSupportException, uno::RuntimeException, std::exception) { } void SAL_CALL ChartView::removeModeChangeApproveListener( const uno::Reference< util::XModeChangeApproveListener >& /* _rxListener */ ) throw (lang::NoSupportException, uno::RuntimeException, std::exception) { } // ____ XUpdatable ____ void SAL_CALL ChartView::update() throw (uno::RuntimeException, std::exception) { impl_updateView(true); //#i100778# migrate all imported or old documents to a plot area sizing exclusive axes (in case the save settings allow for this): //Although in general it is a bad idea to change the model from within the view this is exceptionally the best place to do this special conversion. //When a view update is requested (what happens for creating the metafile or displaying //the chart in edit mode or printing) it is most likely that all necessary information are available - like the underlying spreadsheet data for example. //Those data are important for the correct axis label sizes which are needed during conversion. if( DiagramHelper::switchDiagramPositioningToExcludingPositioning( mrChartModel, true, false ) ) impl_updateView(); } void SAL_CALL ChartView::updateSoft() throw (uno::RuntimeException, std::exception) { update(); } void SAL_CALL ChartView::updateHard() throw (uno::RuntimeException, std::exception) { impl_updateView(false); } // ____ XPropertySet ____ Reference< beans::XPropertySetInfo > SAL_CALL ChartView::getPropertySetInfo() throw (uno::RuntimeException, std::exception) { OSL_FAIL("not implemented"); return 0; } void SAL_CALL ChartView::setPropertyValue( const OUString& rPropertyName , const Any& rValue ) throw (beans::UnknownPropertyException, beans::PropertyVetoException, lang::IllegalArgumentException , lang::WrappedTargetException, uno::RuntimeException, std::exception) { if( rPropertyName == "Resolution" ) { awt::Size aNewResolution; if( ! (rValue >>= aNewResolution) ) throw lang::IllegalArgumentException( "Property 'Resolution' requires value of type awt::Size", 0, 0 ); if( m_aPageResolution.Width!=aNewResolution.Width || m_aPageResolution.Height!=aNewResolution.Height ) { //set modified only when the new resolution is higher and points were skipped before bool bSetModified = m_bPointsWereSkipped && (m_aPageResolution.Widthmodified( lang::EventObject( static_cast< uno::XWeak* >( this ) ) ); } } else if( rPropertyName == "ZoomFactors" ) { //#i75867# poor quality of ole's alternative view with 3D scenes and zoomfactors besides 100% uno::Sequence< beans::PropertyValue > aZoomFactors; if( ! (rValue >>= aZoomFactors) ) throw lang::IllegalArgumentException( "Property 'ZoomFactors' requires value of type Sequence< PropertyValue >", 0, 0 ); sal_Int32 nFilterArgs = aZoomFactors.getLength(); beans::PropertyValue* pDataValues = aZoomFactors.getArray(); while( nFilterArgs-- ) { if ( pDataValues->Name == "ScaleXNumerator" ) pDataValues->Value >>= m_nScaleXNumerator; else if ( pDataValues->Name == "ScaleXDenominator" ) pDataValues->Value >>= m_nScaleXDenominator; else if ( pDataValues->Name == "ScaleYNumerator" ) pDataValues->Value >>= m_nScaleYNumerator; else if ( pDataValues->Name == "ScaleYDenominator" ) pDataValues->Value >>= m_nScaleYDenominator; pDataValues++; } } else if( rPropertyName == "SdrViewIsInEditMode" ) { //#i77362 change notification for changes on additional shapes are missing if( ! (rValue >>= m_bSdrViewIsInEditMode) ) throw lang::IllegalArgumentException( "Property 'SdrViewIsInEditMode' requires value of type sal_Bool", 0, 0 ); } else throw beans::UnknownPropertyException( "unknown property was tried to set to chart wizard", 0 ); } Any SAL_CALL ChartView::getPropertyValue( const OUString& rPropertyName ) throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException, std::exception) { Any aRet; if( rPropertyName == "Resolution" ) { aRet = uno::makeAny( m_aPageResolution ); } else throw beans::UnknownPropertyException( "unknown property was tried to get from chart wizard", 0 ); return aRet; } void SAL_CALL ChartView::addPropertyChangeListener( const OUString& /* aPropertyName */, const Reference< beans::XPropertyChangeListener >& /* xListener */ ) throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException, std::exception) { OSL_FAIL("not implemented"); } void SAL_CALL ChartView::removePropertyChangeListener( const OUString& /* aPropertyName */, const Reference< beans::XPropertyChangeListener >& /* aListener */ ) throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException, std::exception) { OSL_FAIL("not implemented"); } void SAL_CALL ChartView::addVetoableChangeListener( const OUString& /* PropertyName */, const Reference< beans::XVetoableChangeListener >& /* aListener */ ) throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException, std::exception) { OSL_FAIL("not implemented"); } void SAL_CALL ChartView::removeVetoableChangeListener( const OUString& /* PropertyName */, const Reference< beans::XVetoableChangeListener >& /* aListener */ ) throw (beans::UnknownPropertyException, lang::WrappedTargetException, uno::RuntimeException, std::exception) { OSL_FAIL("not implemented"); } // ____ XMultiServiceFactory ____ Reference< uno::XInterface > ChartView::createInstance( const OUString& aServiceSpecifier ) throw (uno::Exception, uno::RuntimeException, std::exception) { SolarMutexGuard aSolarGuard; SdrModel* pModel = ( m_pDrawModelWrapper ? &m_pDrawModelWrapper->getSdrModel() : NULL ); if ( pModel ) { if ( aServiceSpecifier == "com.sun.star.drawing.DashTable" ) { if ( !m_xDashTable.is() ) { m_xDashTable = SvxUnoDashTable_createInstance( pModel ); } return m_xDashTable; } else if ( aServiceSpecifier == "com.sun.star.drawing.GradientTable" ) { if ( !m_xGradientTable.is() ) { m_xGradientTable = SvxUnoGradientTable_createInstance( pModel ); } return m_xGradientTable; } else if ( aServiceSpecifier == "com.sun.star.drawing.HatchTable" ) { if ( !m_xHatchTable.is() ) { m_xHatchTable = SvxUnoHatchTable_createInstance( pModel ); } return m_xHatchTable; } else if ( aServiceSpecifier == "com.sun.star.drawing.BitmapTable" ) { if ( !m_xBitmapTable.is() ) { m_xBitmapTable = SvxUnoBitmapTable_createInstance( pModel ); } return m_xBitmapTable; } else if ( aServiceSpecifier == "com.sun.star.drawing.TransparencyGradientTable" ) { if ( !m_xTransGradientTable.is() ) { m_xTransGradientTable = SvxUnoTransGradientTable_createInstance( pModel ); } return m_xTransGradientTable; } else if ( aServiceSpecifier == "com.sun.star.drawing.MarkerTable" ) { if ( !m_xMarkerTable.is() ) { m_xMarkerTable = SvxUnoMarkerTable_createInstance( pModel ); } return m_xMarkerTable; } } return 0; } Reference< uno::XInterface > ChartView::createInstanceWithArguments( const OUString& ServiceSpecifier, const uno::Sequence< uno::Any >& Arguments ) throw (uno::Exception, uno::RuntimeException, std::exception) { OSL_ENSURE( Arguments.getLength(), "ChartView::createInstanceWithArguments: arguments are ignored" ); (void) Arguments; // avoid warning return createInstance( ServiceSpecifier ); } uno::Sequence< OUString > ChartView::getAvailableServiceNames() throw (uno::RuntimeException, std::exception) { uno::Sequence< OUString > aServiceNames( 6 ); aServiceNames[0] = "com.sun.star.drawing.DashTable"; aServiceNames[1] = "com.sun.star.drawing.GradientTable"; aServiceNames[2] = "com.sun.star.drawing.HatchTable"; aServiceNames[3] = "com.sun.star.drawing.BitmapTable"; aServiceNames[4] = "com.sun.star.drawing.TransparencyGradientTable"; aServiceNames[5] = "com.sun.star.drawing.MarkerTable"; return aServiceNames; } OUString ChartView::dump() throw (uno::RuntimeException, std::exception) { #if HAVE_FEATURE_DESKTOP // Used for unit tests and in chartcontroller only, no need to drag in this when cross-compiling // for non-desktop impl_updateView(); uno::Reference< drawing::XShapes > xShapes( m_xDrawPage, uno::UNO_QUERY_THROW ); sal_Int32 n = xShapes->getCount(); OUStringBuffer aBuffer; for(sal_Int32 i = 0; i < n; ++i) { uno::Reference< drawing::XShapes > xShape(xShapes->getByIndex(i), uno::UNO_QUERY); if(xShape.is()) { XShapeDumper dumper; OUString aString = XShapeDumper::dump(mxRootShape); aBuffer.append(aString); } else { uno::Reference< drawing::XShape > xSingleShape(xShapes->getByIndex(i), uno::UNO_QUERY); if(!xSingleShape.is()) continue; XShapeDumper dumper; OUString aString = XShapeDumper::dump(xSingleShape); aBuffer.append(aString); } aBuffer.append("\n\n"); } return aBuffer.makeStringAndClear(); #else return OUString(); #endif } void ChartView::setViewDirty() { osl::ResettableMutexGuard aGuard(maTimeMutex); m_bViewDirty = true; } IMPL_LINK_NOARG_TYPED(ChartView, UpdateTimeBased, Timer *, void) { setViewDirty(); update(); } void ChartView::createShapes2D( const awt::Size& rPageSize ) { AbstractShapeFactory* pShapeFactory = AbstractShapeFactory::getOrCreateShapeFactory(m_xShapeFactory); SolarMutexGuard aSolarGuard; // todo: it would be nicer to just pass the page m_xDrawPage and format it, // but the draw page does not support XPropertySet formatPage( mrChartModel, rPageSize, mxRootShape, m_xShapeFactory ); CreateShapeParam2D aParam; aParam.maRemainingSpace.X = 0; aParam.maRemainingSpace.Y = 0; aParam.maRemainingSpace.Width = rPageSize.Width; aParam.maRemainingSpace.Height = rPageSize.Height; //create the group shape for diagram and axes first to have title and legends on top of it uno::Reference< XDiagram > xDiagram( mrChartModel.getFirstDiagram() ); OUString aDiagramCID( ObjectIdentifier::createClassifiedIdentifier( OBJECTTYPE_DIAGRAM, OUString::number( 0 ) ) );//todo: other index if more than one diagram is possible uno::Reference< drawing::XShapes > xDiagramPlusAxesPlusMarkHandlesGroup_Shapes( pShapeFactory->createGroup2D(mxRootShape,aDiagramCID) ); aParam.mxMarkHandles = pShapeFactory->createInvisibleRectangle( xDiagramPlusAxesPlusMarkHandlesGroup_Shapes, awt::Size(0,0)); AbstractShapeFactory::setShapeName(aParam.mxMarkHandles, "MarkHandles"); aParam.mxPlotAreaWithAxes = pShapeFactory->createInvisibleRectangle( xDiagramPlusAxesPlusMarkHandlesGroup_Shapes, awt::Size(0, 0)); AbstractShapeFactory::setShapeName(aParam.mxPlotAreaWithAxes, "PlotAreaIncludingAxes"); aParam.mxDiagramWithAxesShapes = pShapeFactory->createGroup2D(xDiagramPlusAxesPlusMarkHandlesGroup_Shapes); bool bAutoPositionDummy = true; lcl_createTitle( TitleHelper::MAIN_TITLE, mxRootShape, m_xShapeFactory, mrChartModel, aParam.maRemainingSpace, rPageSize, ALIGN_TOP, bAutoPositionDummy); if (aParam.maRemainingSpace.Width <= 0 || aParam.maRemainingSpace.Height <= 0) return; lcl_createTitle( TitleHelper::SUB_TITLE, mxRootShape, m_xShapeFactory, mrChartModel, aParam.maRemainingSpace, rPageSize, ALIGN_TOP, bAutoPositionDummy ); if (aParam.maRemainingSpace.Width <= 0|| aParam.maRemainingSpace.Height <= 0) return; aParam.mpSeriesPlotterContainer.reset(new SeriesPlotterContainer(m_aVCooSysList)); aParam.mpSeriesPlotterContainer->initializeCooSysAndSeriesPlotter( mrChartModel ); if(maTimeBased.bTimeBased && maTimeBased.nFrame != 0) { SeriesPlottersType& rSeriesPlotter = aParam.mpSeriesPlotterContainer->getSeriesPlotterList(); size_t n = rSeriesPlotter.size(); for(size_t i = 0; i < n; ++i) { std::vector aAllNewDataSeries = rSeriesPlotter[i].getAllSeries(); std::vector< VDataSeries* >& rAllOldDataSeries = maTimeBased.m_aDataSeriesList[i]; size_t m = std::min(aAllNewDataSeries.size(), rAllOldDataSeries.size()); for(size_t j = 0; j < m; ++j) { aAllNewDataSeries[j]->setOldTimeBased( rAllOldDataSeries[j], (maTimeBased.nFrame % 60)/60.0); } } } lcl_createLegend( LegendHelper::getLegend( mrChartModel ), mxRootShape, m_xShapeFactory, m_xCC, aParam.maRemainingSpace, rPageSize, mrChartModel, aParam.mpSeriesPlotterContainer->getLegendEntryProviderList(), lcl_getDefaultWritingModeFromPool( m_pDrawModelWrapper ) ); if (aParam.maRemainingSpace.Width <= 0 || aParam.maRemainingSpace.Height <= 0) return; if (!createAxisTitleShapes2D(aParam, rPageSize)) return; bool bDummy = false; bool bIsVertical = DiagramHelper::getVertical(xDiagram, bDummy, bDummy); if (getAvailablePosAndSizeForDiagram(aParam, rPageSize, mrChartModel.getFirstDiagram())) { awt::Rectangle aUsedOuterRect = impl_createDiagramAndContent(aParam, rPageSize); if (aParam.mxPlotAreaWithAxes.is()) { aParam.mxPlotAreaWithAxes->setPosition(awt::Point(aUsedOuterRect.X, aUsedOuterRect.Y)); aParam.mxPlotAreaWithAxes->setSize(awt::Size(aUsedOuterRect.Width, aUsedOuterRect.Height)); } //correct axis title position awt::Rectangle aDiagramPlusAxesRect( aUsedOuterRect ); if (aParam.mbAutoPosTitleX) changePositionOfAxisTitle(aParam.mpVTitleX.get(), ALIGN_BOTTOM, aDiagramPlusAxesRect, rPageSize); if (aParam.mbAutoPosTitleY) changePositionOfAxisTitle(aParam.mpVTitleY.get(), ALIGN_LEFT, aDiagramPlusAxesRect, rPageSize); if (aParam.mbAutoPosTitleZ) changePositionOfAxisTitle(aParam.mpVTitleZ.get(), ALIGN_Z, aDiagramPlusAxesRect, rPageSize); if (aParam.mbAutoPosSecondTitleX) changePositionOfAxisTitle(aParam.mpVTitleSecondX.get(), bIsVertical? ALIGN_RIGHT : ALIGN_TOP, aDiagramPlusAxesRect, rPageSize); if (aParam.mbAutoPosSecondTitleY) changePositionOfAxisTitle(aParam.mpVTitleSecondY.get(), bIsVertical? ALIGN_TOP : ALIGN_RIGHT, aDiagramPlusAxesRect, rPageSize); } //cleanup: remove all empty group shapes to avoid grey border lines: lcl_removeEmptyGroupShapes( mxRootShape ); render(); if(maTimeBased.bTimeBased && maTimeBased.nFrame % 60 == 0) { // create copy of the data for next frame SeriesPlottersType& rSeriesPlotter = aParam.mpSeriesPlotterContainer->getSeriesPlotterList(); size_t n = rSeriesPlotter.size(); maTimeBased.m_aDataSeriesList.clear(); maTimeBased.m_aDataSeriesList.resize(n); for(size_t i = 0; i < n; ++i) { std::vector aAllNewDataSeries = rSeriesPlotter[i].getAllSeries(); std::vector& rAllOldDataSeries = maTimeBased.m_aDataSeriesList[i]; size_t m = aAllNewDataSeries.size(); for(size_t j = 0; j < m; ++j) { rAllOldDataSeries.push_back( aAllNewDataSeries[j]-> createCopyForTimeBased() ); } } if(maTimeBased.eMode != MANUAL) { mrChartModel.setTimeBased(true); mrChartModel.getNextTimePoint(); } else maTimeBased.maTimer.Stop(); } if(maTimeBased.bTimeBased && maTimeBased.eMode != MANUAL && !maTimeBased.maTimer.IsActive()) { maTimeBased.maTimer.SetTimeout(15); maTimeBased.maTimer.SetTimeoutHdl(LINK(this, ChartView, UpdateTimeBased)); maTimeBased.maTimer.Start(); } } bool ChartView::createAxisTitleShapes2D( CreateShapeParam2D& rParam, const css::awt::Size& rPageSize ) { uno::Reference xDiagram = mrChartModel.getFirstDiagram(); Reference< chart2::XChartType > xChartType( DiagramHelper::getChartTypeByIndex( xDiagram, 0 ) ); sal_Int32 nDimension = DiagramHelper::getDimension( xDiagram ); if( ChartTypeHelper::isSupportingMainAxis( xChartType, nDimension, 0 ) ) rParam.mpVTitleX = lcl_createTitle( TitleHelper::TITLE_AT_STANDARD_X_AXIS_POSITION, mxRootShape, m_xShapeFactory, mrChartModel , rParam.maRemainingSpace, rPageSize, ALIGN_BOTTOM, rParam.mbAutoPosTitleX ); if (rParam.maRemainingSpace.Width <= 0 ||rParam.maRemainingSpace.Height <= 0) return false; if( ChartTypeHelper::isSupportingMainAxis( xChartType, nDimension, 1 ) ) rParam.mpVTitleY = lcl_createTitle( TitleHelper::TITLE_AT_STANDARD_Y_AXIS_POSITION, mxRootShape, m_xShapeFactory, mrChartModel , rParam.maRemainingSpace, rPageSize, ALIGN_LEFT, rParam.mbAutoPosTitleY ); if (rParam.maRemainingSpace.Width <= 0 || rParam.maRemainingSpace.Height <= 0) return false; if( ChartTypeHelper::isSupportingMainAxis( xChartType, nDimension, 2 ) ) rParam.mpVTitleZ = lcl_createTitle( TitleHelper::Z_AXIS_TITLE, mxRootShape, m_xShapeFactory, mrChartModel , rParam.maRemainingSpace, rPageSize, ALIGN_RIGHT, rParam.mbAutoPosTitleZ ); if (rParam.maRemainingSpace.Width <= 0 || rParam.maRemainingSpace.Height <= 0) return false; bool bDummy = false; bool bIsVertical = DiagramHelper::getVertical( xDiagram, bDummy, bDummy ); if( ChartTypeHelper::isSupportingSecondaryAxis( xChartType, nDimension, 0 ) ) rParam.mpVTitleSecondX = lcl_createTitle( TitleHelper::SECONDARY_X_AXIS_TITLE, mxRootShape, m_xShapeFactory, mrChartModel , rParam.maRemainingSpace, rPageSize, bIsVertical? ALIGN_RIGHT : ALIGN_TOP, rParam.mbAutoPosSecondTitleX ); if (rParam.maRemainingSpace.Width <= 0 || rParam.maRemainingSpace.Height <= 0) return false; if( ChartTypeHelper::isSupportingSecondaryAxis( xChartType, nDimension, 1 ) ) rParam.mpVTitleSecondY = lcl_createTitle( TitleHelper::SECONDARY_Y_AXIS_TITLE, mxRootShape, m_xShapeFactory, mrChartModel , rParam.maRemainingSpace, rPageSize, bIsVertical? ALIGN_TOP : ALIGN_RIGHT, rParam.mbAutoPosSecondTitleY ); if (rParam.maRemainingSpace.Width <= 0 || rParam.maRemainingSpace.Height <= 0) return false; return true; } void ChartView::createShapes3D() { OpenGLWindow* pWindow = mrChartModel.getOpenGLWindow(); if(!pWindow) return; if( pWindow->GetSizePixel().Width() == 0 || pWindow->GetSizePixel().Height() == 0 ) { awt::Size aPageSize = mrChartModel.getVisualAreaSize( embed::Aspects::MSOLE_CONTENT ); Size aSize = pWindow->LogicToPixel( Size(aPageSize.Width,aPageSize.Height), MapUnit(MAP_100TH_MM) ); pWindow->SetSizePixel(aSize); } pWindow->Show(); uno::Reference< XDiagram > xDiagram( mrChartModel.getFirstDiagram() ); uno::Reference< XCoordinateSystemContainer > xCooSysContainer( xDiagram, uno::UNO_QUERY ); if( !xCooSysContainer.is()) return; uno::Sequence< uno::Reference< XCoordinateSystem > > aCooSysList( xCooSysContainer->getCoordinateSystems() ); if (aCooSysList.getLength() != 1) // Supporting multiple coordinates in a truly 3D chart (which implies // it's a Cartesian coordinate system) is a bit of a challenge, if not // impossible. return; uno::Reference xCooSys( aCooSysList[0] ); //iterate through all chart types in the current coordinate system uno::Reference< XChartTypeContainer > xChartTypeContainer( xCooSys, uno::UNO_QUERY ); OSL_ASSERT( xChartTypeContainer.is()); if( !xChartTypeContainer.is() ) return; uno::Sequence< uno::Reference< XChartType > > aChartTypeList( xChartTypeContainer->getChartTypes() ); if (aChartTypeList.getLength() != 1) // Likewise, we can't really support multiple chart types here. return; uno::Reference< XChartType > xChartType( aChartTypeList[0] ); if (!m_pGL3DPlotter) { m_pGL3DPlotter.reset(new GL3DBarChart(xChartType, pWindow)); } else { GL3DBarChart* pChart = dynamic_cast(m_pGL3DPlotter.get()); if (pChart) pChart->setOpenGLWindow(pWindow); } uno::Reference< XDataSeriesContainer > xDataSeriesContainer( xChartType, uno::UNO_QUERY ); OSL_ASSERT( xDataSeriesContainer.is()); if( !xDataSeriesContainer.is() ) return; boost::ptr_vector aDataSeries; uno::Sequence< uno::Reference< XDataSeries > > aSeriesList( xDataSeriesContainer->getDataSeries() ); for( sal_Int32 nS = 0; nS < aSeriesList.getLength(); ++nS ) { uno::Reference< XDataSeries > xDataSeries( aSeriesList[nS], uno::UNO_QUERY ); if(!xDataSeries.is()) continue; aDataSeries.push_back(new VDataSeries(xDataSeries)); } boost::scoped_ptr pCatProvider(new ExplicitCategoriesProvider(xCooSys, mrChartModel)); m_pGL3DPlotter->create3DShapes(aDataSeries, *pCatProvider); m_pGL3DPlotter->render(); } void ChartView::updateOpenGLWindow() { if(!isReal3DChart()) mp2DRenderer->updateOpenGLWindow(); } } //namespace chart extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface * SAL_CALL com_sun_star_comp_chart2_ChartView_get_implementation(css::uno::XComponentContext *context, css::uno::Sequence const &) { ::chart::ChartModel *pChartModel = new ::chart::ChartModel(context); return cppu::acquire(new ::chart::ChartView(context, *pChartModel)); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */