/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #if defined(_WIN32) #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if HAVE_FEATURE_BREAKPAD #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "optgdlg.hxx" #include #include #include #include #include #include #if defined(_WIN32) #include #include #endif using namespace ::com::sun::star::uno; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::container; using namespace ::com::sun::star::util; using namespace ::utl; // class OfaMiscTabPage -------------------------------------------------- DeactivateRC OfaMiscTabPage::DeactivatePage( SfxItemSet* pSet_ ) { if ( pSet_ ) FillItemSet( pSet_ ); return DeactivateRC::LeavePage; } namespace { const OUString & impl_SystemFileOpenServiceName() { #if defined(_WIN32) static constexpr OUString gPicker = u"com.sun.star.ui.dialogs.SystemFilePicker"_ustr; return gPicker; #elif defined MACOSX static constexpr OUString gPicker = u"com.sun.star.ui.dialogs.AquaFilePicker"_ustr; return gPicker; #else return EMPTY_OUSTRING; #endif } bool lcl_HasSystemFilePicker() { if( Application::hasNativeFileSelection() ) return true; // Otherwise fall-back on querying services bool bRet = false; Reference< XMultiServiceFactory > xFactory = comphelper::getProcessServiceFactory(); Reference< XContentEnumerationAccess > xEnumAccess( xFactory, UNO_QUERY ); Reference< XSet > xSet( xFactory, UNO_QUERY ); if ( ! xEnumAccess.is() || ! xSet.is() ) return bRet; try { const OUString& aFileService = impl_SystemFileOpenServiceName(); Reference< XEnumeration > xEnum = xEnumAccess->createContentEnumeration( aFileService ); if ( xEnum.is() && xEnum->hasMoreElements() ) bRet = true; } catch (const IllegalArgumentException&) { } catch (const ElementExistException&) { } return bRet; } } OfaMiscTabPage::OfaMiscTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet) : SfxTabPage(pPage, pController, u"cui/ui/optgeneralpage.ui"_ustr, u"OptGeneralPage"_ustr, &rSet) , m_xExtHelpCB(m_xBuilder->weld_check_button(u"exthelp"_ustr)) , m_xExtHelpImg(m_xBuilder->weld_widget(u"lockexthelp"_ustr)) , m_xPopUpNoHelpCB(m_xBuilder->weld_check_button(u"popupnohelp"_ustr)) , m_xPopUpNoHelpImg(m_xBuilder->weld_widget(u"lockpopupnohelp"_ustr)) , m_xShowTipOfTheDay(m_xBuilder->weld_check_button(u"cbShowTipOfTheDay"_ustr)) , m_xShowTipOfTheDayImg(m_xBuilder->weld_widget(u"lockcbShowTipOfTheDay"_ustr)) , m_xFileDlgFrame(m_xBuilder->weld_widget(u"filedlgframe"_ustr)) , m_xFileDlgROImage(m_xBuilder->weld_widget(u"lockimage"_ustr)) , m_xFileDlgCB(m_xBuilder->weld_check_button(u"filedlg"_ustr)) , m_xDocStatusCB(m_xBuilder->weld_check_button(u"docstatus"_ustr)) , m_xDocStatusImg(m_xBuilder->weld_widget(u"lockdocstatus"_ustr)) , m_xYearFrame(m_xBuilder->weld_widget(u"yearframe"_ustr)) , m_xYearLabel(m_xBuilder->weld_label(u"yearslabel"_ustr)) , m_xYearValueField(m_xBuilder->weld_spin_button(u"year"_ustr)) , m_xToYearFT(m_xBuilder->weld_label(u"toyear"_ustr)) , m_xYearFrameImg(m_xBuilder->weld_widget(u"lockyears"_ustr)) #if HAVE_FEATURE_BREAKPAD , m_xPrivacyFrame(m_xBuilder->weld_widget("privacyframe")) , m_xCrashReport(m_xBuilder->weld_check_button("crashreport")) , m_xCrashReportImg(m_xBuilder->weld_widget("lockcrashreport")) #endif #if defined(_WIN32) , m_xQuickStarterFrame(m_xBuilder->weld_widget("quickstarter")) , m_xQuickLaunchCB(m_xBuilder->weld_check_button("quicklaunch")) , m_xQuickLaunchImg(m_xBuilder->weld_widget("lockquicklaunch")) , m_xFileAssocFrame(m_xBuilder->weld_widget("fileassoc")) , m_xFileAssocBtn(m_xBuilder->weld_button("assocfiles")) , m_xPerformFileExtCheck(m_xBuilder->weld_check_button("cbPerformFileExtCheck")) , m_xPerformFileExtImg(m_xBuilder->weld_widget("lockcbPerformFileExtCheck")) #endif { #if HAVE_FEATURE_BREAKPAD m_xPrivacyFrame->show(); #endif #if defined(_WIN32) // Store-packaged apps (located under the protected Program Files\WindowsApps) can't use normal // shell shortcuts to their exe. TODO: show a button to open "Startup Apps" system applet? if (!sal::systools::IsStorePackagedApp()) m_xQuickStarterFrame->show(); m_xFileAssocFrame->show(); m_xFileAssocBtn->connect_clicked(LINK(this, OfaMiscTabPage, FileAssocClick)); #endif m_aStrDateInfo = m_xToYearFT->get_label(); m_xYearValueField->connect_value_changed( LINK( this, OfaMiscTabPage, TwoFigureHdl ) ); SetExchangeSupport(); } OfaMiscTabPage::~OfaMiscTabPage() { } std::unique_ptr OfaMiscTabPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrSet ) { return std::make_unique( pPage, pController, *rAttrSet ); } OUString OfaMiscTabPage::GetAllStrings() { OUString sAllStrings; OUString labels[] = { u"label1"_ustr, u"label2"_ustr, u"label4"_ustr, u"label5"_ustr, u"yearslabel"_ustr, u"toyear"_ustr, u"label8"_ustr, u"label9"_ustr }; for (const auto& label : labels) { if (const auto pString = m_xBuilder->weld_label(label)) sAllStrings += pString->get_label() + " "; } OUString checkButton[] = { u"exthelp"_ustr, u"popupnohelp"_ustr, u"cbShowTipOfTheDay"_ustr, u"filedlg"_ustr, u"docstatus"_ustr, u"crashreport"_ustr, u"quicklaunch"_ustr, u"cbPerformFileExtCheck"_ustr }; for (const auto& check : checkButton) { if (const auto pString = m_xBuilder->weld_check_button(check)) sAllStrings += pString->get_label() + " "; } if (const auto pString = m_xBuilder->weld_button(u"assocfiles"_ustr)) sAllStrings += pString->get_label() + " "; return sAllStrings.replaceAll("_", ""); } bool OfaMiscTabPage::FillItemSet( SfxItemSet* rSet ) { bool bModified = false; std::shared_ptr batch(comphelper::ConfigurationChanges::create()); if ( m_xPopUpNoHelpCB->get_state_changed_from_saved() ) officecfg::Office::Common::Help::BuiltInHelpNotInstalledPopUp::set(m_xPopUpNoHelpCB->get_active(), batch); if ( m_xExtHelpCB->get_state_changed_from_saved() ) officecfg::Office::Common::Help::ExtendedTip::set(m_xExtHelpCB->get_active(), batch); if ( m_xShowTipOfTheDay->get_state_changed_from_saved() ) { officecfg::Office::Common::Misc::ShowTipOfTheDay::set(m_xShowTipOfTheDay->get_active(), batch); bModified = true; } if ( m_xFileDlgCB->get_state_changed_from_saved() ) { officecfg::Office::Common::Misc::UseSystemFileDialog::set( !m_xFileDlgCB->get_active(), batch ); bModified = true; } if (m_xDocStatusCB->get_state_changed_from_saved()) { officecfg::Office::Common::Print::PrintingModifiesDocument::set(m_xDocStatusCB->get_active(), batch); bModified = true; } const SfxUInt16Item* pUInt16Item = GetOldItem( *rSet, SID_ATTR_YEAR2000 ); sal_uInt16 nNum = static_cast(m_xYearValueField->get_text().toInt32()); if ( pUInt16Item && pUInt16Item->GetValue() != nNum ) { bModified = true; rSet->Put( SfxUInt16Item( SID_ATTR_YEAR2000, nNum ) ); } #if HAVE_FEATURE_BREAKPAD if (m_xCrashReport->get_state_changed_from_saved()) { officecfg::Office::Common::Misc::CrashReport::set(m_xCrashReport->get_active(), batch); bModified = true; } #endif #if defined(_WIN32) if (m_xPerformFileExtCheck->get_state_changed_from_saved()) { officecfg::Office::Common::Misc::PerformFileExtCheck::set( m_xPerformFileExtCheck->get_active(), batch); bModified = true; } if( m_xQuickLaunchCB->get_state_changed_from_saved()) { rSet->Put(SfxBoolItem(SID_ATTR_QUICKLAUNCHER, m_xQuickLaunchCB->get_active())); bModified = true; } #endif batch->commit(); return bModified; } void OfaMiscTabPage::Reset( const SfxItemSet* rSet ) { bool bEnable = !officecfg::Office::Common::Help::ExtendedTip::isReadOnly(); m_xExtHelpCB->set_active( officecfg::Office::Common::Help::Tip::get() && officecfg::Office::Common::Help::ExtendedTip::get() ); m_xExtHelpCB->set_sensitive(bEnable); m_xExtHelpImg->set_visible(!bEnable); m_xExtHelpCB->save_state(); bEnable = !officecfg::Office::Common::Help::BuiltInHelpNotInstalledPopUp::isReadOnly(); m_xPopUpNoHelpCB->set_active( officecfg::Office::Common::Help::BuiltInHelpNotInstalledPopUp::get() ); m_xPopUpNoHelpCB->set_sensitive(bEnable); m_xPopUpNoHelpImg->set_visible(!bEnable); m_xPopUpNoHelpCB->save_state(); bEnable = !officecfg::Office::Common::Misc::ShowTipOfTheDay::isReadOnly(); m_xShowTipOfTheDay->set_active( officecfg::Office::Common::Misc::ShowTipOfTheDay::get() ); m_xShowTipOfTheDay->set_sensitive(bEnable); m_xShowTipOfTheDayImg->set_visible(!bEnable); m_xShowTipOfTheDay->save_state(); if (!lcl_HasSystemFilePicker()) m_xFileDlgFrame->hide(); else { bEnable = !officecfg::Office::Common::Misc::UseSystemFileDialog::isReadOnly(); m_xFileDlgCB->set_sensitive(bEnable); m_xFileDlgROImage->set_visible(!bEnable); } m_xFileDlgCB->set_active(!officecfg::Office::Common::Misc::UseSystemFileDialog::get()); m_xFileDlgCB->save_state(); bEnable = !officecfg::Office::Common::Print::PrintingModifiesDocument::isReadOnly(); m_xDocStatusCB->set_active(officecfg::Office::Common::Print::PrintingModifiesDocument::get()); m_xDocStatusCB->set_sensitive(bEnable); m_xDocStatusImg->set_visible(!bEnable); m_xDocStatusCB->save_state(); bEnable = !officecfg::Office::Common::DateFormat::TwoDigitYear::isReadOnly(); m_xYearLabel->set_sensitive(bEnable); m_xYearValueField->set_sensitive(bEnable); m_xToYearFT->set_sensitive(bEnable); m_xYearFrameImg->set_visible(!bEnable); if ( const SfxUInt16Item* pYearItem = rSet->GetItemIfSet( SID_ATTR_YEAR2000, false ) ) { m_xYearValueField->set_value( pYearItem->GetValue() ); TwoFigureHdl(*m_xYearValueField); } else m_xYearFrame->set_sensitive(false); #if HAVE_FEATURE_BREAKPAD m_xCrashReport->set_active(officecfg::Office::Common::Misc::CrashReport::get() && CrashReporter::IsDumpEnable()); m_xCrashReport->set_sensitive(!officecfg::Office::Common::Misc::CrashReport::isReadOnly() && CrashReporter::IsDumpEnable()); m_xCrashReportImg->set_visible(officecfg::Office::Common::Misc::CrashReport::isReadOnly() && CrashReporter::IsDumpEnable()); m_xCrashReport->save_state(); #endif #if defined(_WIN32) const SfxPoolItem* pItem = nullptr; SfxItemState eState = rSet->GetItemState( SID_ATTR_QUICKLAUNCHER, false, &pItem ); if ( SfxItemState::SET == eState ) m_xQuickLaunchCB->set_active( static_cast(pItem)->GetValue() ); else if ( SfxItemState::DISABLED == eState ) { // quickstart not installed m_xQuickStarterFrame->hide(); } m_xQuickLaunchCB->save_state(); m_xPerformFileExtCheck->set_active( officecfg::Office::Common::Misc::PerformFileExtCheck::get()); m_xPerformFileExtCheck->save_state(); m_xPerformFileExtCheck->set_sensitive(!officecfg::Office::Common::Misc::PerformFileExtCheck::isReadOnly()); m_xPerformFileExtImg->set_visible(officecfg::Office::Common::Misc::PerformFileExtCheck::isReadOnly()); #endif } IMPL_LINK_NOARG( OfaMiscTabPage, TwoFigureHdl, weld::SpinButton&, void ) { OUString aOutput( m_aStrDateInfo ); OUString aStr( m_xYearValueField->get_text() ); sal_Int32 nNum = aStr.toInt32(); if ( aStr.getLength() != 4 || nNum < m_xYearValueField->get_min() || nNum > m_xYearValueField->get_max() ) aOutput += "????"; else { nNum += 99; aOutput += OUString::number( nNum ); } m_xToYearFT->set_label( aOutput ); } #if defined(_WIN32) IMPL_STATIC_LINK_NOARG(OfaMiscTabPage, FileAssocClick, weld::Button&, void) { vcl::fileregistration::LaunchRegistrationUI(); } #endif class CanvasSettings { public: CanvasSettings(); bool IsHardwareAccelerationEnabled() const; bool IsHardwareAccelerationAvailable() const; bool IsHardwareAccelerationRO() const; void EnabledHardwareAcceleration( bool _bEnabled ) const; private: typedef std::vector< std::pair > > ServiceVector; Reference mxForceFlagNameAccess; ServiceVector maAvailableImplementations; mutable bool mbHWAccelAvailable; mutable bool mbHWAccelChecked; }; CanvasSettings::CanvasSettings() : mbHWAccelAvailable(false), mbHWAccelChecked(false) { try { Reference xConfigProvider( css::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); Sequence aArgs1(comphelper::InitAnyPropertySequence( { {"nodepath", Any(u"/org.openoffice.Office.Canvas"_ustr)} })); mxForceFlagNameAccess.set( xConfigProvider->createInstanceWithArguments( u"com.sun.star.configuration.ConfigurationUpdateAccess"_ustr, aArgs1 ), UNO_QUERY_THROW ); Sequence aArgs2(comphelper::InitAnyPropertySequence( { {"nodepath", Any(u"/org.openoffice.Office.Canvas/CanvasServiceList"_ustr)} })); Reference xNameAccess( xConfigProvider->createInstanceWithArguments( u"com.sun.star.configuration.ConfigurationAccess"_ustr, aArgs2 ), UNO_QUERY_THROW ); Reference xHierarchicalNameAccess( xNameAccess, UNO_QUERY_THROW); for (auto& serviceName : xNameAccess->getElementNames()) { Reference xEntryNameAccess( xHierarchicalNameAccess->getByHierarchicalName(serviceName), UNO_QUERY ); if( xEntryNameAccess.is() ) { Sequence preferredImplementations; if( xEntryNameAccess->getByName(u"PreferredImplementations"_ustr) >>= preferredImplementations ) maAvailableImplementations.emplace_back(serviceName, preferredImplementations); } } } catch (const Exception&) { } } bool CanvasSettings::IsHardwareAccelerationAvailable() const { if( !mbHWAccelChecked ) { mbHWAccelChecked = true; Reference< XMultiServiceFactory > xFactory = comphelper::getProcessServiceFactory(); // check whether any of the service lists has an // implementation that presents the "HardwareAcceleration" property for (auto const& availableImpl : maAvailableImplementations) { for (auto& currImpl : availableImpl.second) { try { Reference xPropSet( xFactory->createInstance( currImpl.trim() ), UNO_QUERY_THROW ); bool bHasAccel(false); if( xPropSet->getPropertyValue(u"HardwareAcceleration"_ustr) >>= bHasAccel ) if( bHasAccel ) { mbHWAccelAvailable = true; return mbHWAccelAvailable; } } catch (const Exception&) { } } } } return mbHWAccelAvailable; } bool CanvasSettings::IsHardwareAccelerationEnabled() const { bool bForceLastEntry(false); if( !mxForceFlagNameAccess.is() ) return true; if( !(mxForceFlagNameAccess->getByName(u"ForceSafeServiceImpl"_ustr) >>= bForceLastEntry) ) return true; return !bForceLastEntry; } bool CanvasSettings::IsHardwareAccelerationRO() const { Reference< XPropertySet > xSet(mxForceFlagNameAccess, UNO_QUERY); if (!xSet.is()) return true; Reference< XPropertySetInfo > xInfo = xSet->getPropertySetInfo(); Property aProp = xInfo->getPropertyByName(u"ForceSafeServiceImpl"_ustr); return ((aProp.Attributes & css::beans::PropertyAttribute::READONLY ) == css::beans::PropertyAttribute::READONLY); } void CanvasSettings::EnabledHardwareAcceleration( bool _bEnabled ) const { Reference< XNameReplace > xNameReplace( mxForceFlagNameAccess, UNO_QUERY ); if( !xNameReplace.is() ) return; xNameReplace->replaceByName( u"ForceSafeServiceImpl"_ustr, Any(!_bEnabled) ); Reference< XChangesBatch > xChangesBatch( mxForceFlagNameAccess, UNO_QUERY ); if( !xChangesBatch.is() ) return; xChangesBatch->commitChanges(); } // class OfaViewTabPage -------------------------------------------------- static bool DisplayNameCompareLessThan(const vcl::IconThemeInfo& rInfo1, const vcl::IconThemeInfo& rInfo2) { return rInfo1.GetDisplayName().compareTo(rInfo2.GetDisplayName()) < 0; } OfaViewTabPage::OfaViewTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet) : SfxTabPage(pPage, pController, u"cui/ui/optviewpage.ui"_ustr, u"OptViewPage"_ustr, &rSet) , nSizeLB_InitialSelection(0) , nSidebarSizeLB_InitialSelection(0) , nNotebookbarSizeLB_InitialSelection(0) , nStyleLB_InitialSelection(0) , pCanvasSettings(new CanvasSettings) , m_xIconSizeLabel(m_xBuilder->weld_label(u"label14"_ustr)) , m_xIconSizeLB(m_xBuilder->weld_combo_box(u"iconsize"_ustr)) , m_xIconSizeImg(m_xBuilder->weld_widget(u"lockiconsize"_ustr)) , m_xSidebarIconSizeLabel(m_xBuilder->weld_label(u"label9"_ustr)) , m_xSidebarIconSizeLB(m_xBuilder->weld_combo_box(u"sidebariconsize"_ustr)) , m_xSidebarIconSizeImg(m_xBuilder->weld_widget(u"locksidebariconsize"_ustr)) , m_xNotebookbarIconSizeLabel(m_xBuilder->weld_label(u"label8"_ustr)) , m_xNotebookbarIconSizeLB(m_xBuilder->weld_combo_box(u"notebookbariconsize"_ustr)) , m_xNotebookbarIconSizeImg(m_xBuilder->weld_widget(u"locknotebookbariconsize"_ustr)) , m_xIconStyleLabel(m_xBuilder->weld_label(u"label6"_ustr)) , m_xIconStyleLB(m_xBuilder->weld_combo_box(u"iconstyle"_ustr)) , m_xIconStyleImg(m_xBuilder->weld_widget(u"lockiconstyle"_ustr)) , m_xFontAntiAliasing(m_xBuilder->weld_check_button(u"aafont"_ustr)) , m_xFontAntiAliasingImg(m_xBuilder->weld_widget(u"lockaafont"_ustr)) , m_xAAPointLimitLabel(m_xBuilder->weld_label(u"aafrom"_ustr)) , m_xAAPointLimitLabelImg(m_xBuilder->weld_widget(u"lockaafrom"_ustr)) , m_xAAPointLimit(m_xBuilder->weld_metric_spin_button(u"aanf"_ustr, FieldUnit::PIXEL)) , m_xFontShowCB(m_xBuilder->weld_check_button(u"showfontpreview"_ustr)) , m_xFontShowImg(m_xBuilder->weld_widget(u"lockshowfontpreview"_ustr)) , m_xUseHardwareAccell(m_xBuilder->weld_check_button(u"useaccel"_ustr)) , m_xUseHardwareAccellImg(m_xBuilder->weld_widget(u"lockuseaccel"_ustr)) , m_xUseAntiAliase(m_xBuilder->weld_check_button(u"useaa"_ustr)) , m_xUseAntiAliaseImg(m_xBuilder->weld_widget(u"lockuseaa"_ustr)) , m_xUseSkia(m_xBuilder->weld_check_button(u"useskia"_ustr)) , m_xUseSkiaImg(m_xBuilder->weld_widget(u"lockuseskia"_ustr)) , m_xForceSkiaRaster(m_xBuilder->weld_check_button(u"forceskiaraster"_ustr)) , m_xForceSkiaRasterImg(m_xBuilder->weld_widget(u"lockforceskiaraster"_ustr)) , m_xSkiaStatusEnabled(m_xBuilder->weld_label(u"skiaenabled"_ustr)) , m_xSkiaStatusDisabled(m_xBuilder->weld_label(u"skiadisabled"_ustr)) , m_xSkiaLog(m_xBuilder->weld_button(u"btnSkialog"_ustr)) , m_xMouseMiddleLabel(m_xBuilder->weld_label(u"label12"_ustr)) , m_xMouseMiddleLB(m_xBuilder->weld_combo_box(u"mousemiddle"_ustr)) , m_xMouseMiddleImg(m_xBuilder->weld_widget(u"lockmousemiddle"_ustr)) , m_xMoreIcons(m_xBuilder->weld_button(u"btnMoreIcons"_ustr)) , m_xRunGPTests(m_xBuilder->weld_button(u"btn_rungptest"_ustr)) , m_sAutoStr(m_xIconStyleLB->get_text(0)) { m_xFontAntiAliasing->connect_toggled( LINK( this, OfaViewTabPage, OnAntialiasingToggled ) ); m_xUseSkia->connect_toggled(LINK(this, OfaViewTabPage, OnUseSkiaToggled)); m_xSkiaLog->connect_clicked(LINK(this, OfaViewTabPage, OnCopySkiaLog)); UpdateIconThemes(); m_xIconStyleLB->set_active(0); m_xMoreIcons->connect_clicked(LINK(this, OfaViewTabPage, OnMoreIconsClick)); m_xRunGPTests->connect_clicked(LINK(this, OfaViewTabPage, OnRunGPTestClick)); // Hide "Run Graphics Test" button if Experimental Mode is off if (!officecfg::Office::Common::Misc::ExperimentalMode::get()) m_xRunGPTests->hide(); } void OfaViewTabPage::UpdateIconThemes() { // Set known icon themes m_xIconStyleLB->clear(); StyleSettings aStyleSettings = Application::GetSettings().GetStyleSettings(); mInstalledIconThemes = aStyleSettings.GetInstalledIconThemes(); std::sort(mInstalledIconThemes.begin(), mInstalledIconThemes.end(), DisplayNameCompareLessThan); // Start with the automatically chosen icon theme OUString autoThemeId = aStyleSettings.GetAutomaticallyChosenIconTheme(); const vcl::IconThemeInfo& autoIconTheme = vcl::IconThemeInfo::FindIconThemeById(mInstalledIconThemes, autoThemeId); OUString entryForAuto = m_sAutoStr + " (" + autoIconTheme.GetDisplayName() + ")"; m_xIconStyleLB->append(u"auto"_ustr, entryForAuto); // index 0 means choose style automatically // separate auto and other icon themes m_xIconStyleLB->append_separator(u""_ustr); for (auto const& installIconTheme : mInstalledIconThemes) m_xIconStyleLB->append(installIconTheme.GetThemeId(), installIconTheme.GetDisplayName()); } OfaViewTabPage::~OfaViewTabPage() { } IMPL_LINK_NOARG(OfaViewTabPage, OnRunGPTestClick, weld::Button&, void) { GraphicsTestsDialog m_xGraphicsTestDialog(m_xContainer.get()); m_xGraphicsTestDialog.run(); } IMPL_STATIC_LINK_NOARG(OfaViewTabPage, OnMoreIconsClick, weld::Button&, void) { css::uno::Sequence aArgs{ comphelper::makePropertyValue( u"AdditionsTag"_ustr, u"Icons"_ustr) }; comphelper::dispatchCommand(u".uno:AdditionsDialog"_ustr, aArgs); } IMPL_LINK_NOARG( OfaViewTabPage, OnAntialiasingToggled, weld::Toggleable&, void ) { bool bAAEnabled = m_xFontAntiAliasing->get_active() && !officecfg::Office::Common::View::FontAntiAliasing::MinPixelHeight::isReadOnly(); m_xAAPointLimitLabel->set_sensitive(bAAEnabled); m_xAAPointLimit->set_sensitive(bAAEnabled); } IMPL_LINK_NOARG(OfaViewTabPage, OnUseSkiaToggled, weld::Toggleable&, void) { UpdateSkiaStatus(); } IMPL_LINK_NOARG(OfaViewTabPage, OnCopySkiaLog, weld::Button&, void) { #if HAVE_FEATURE_SKIA css::uno::Reference xClipboard = css::datatransfer::clipboard::SystemClipboard::create( comphelper::getProcessComponentContext()); OUString sInfo = SkiaHelper::readLog(); vcl::unohelper::TextDataObject::CopyStringTo(sInfo, xClipboard); m_xSkiaLog->set_from_icon_name(RID_SVXBMP_COPY); #endif } void OfaViewTabPage::HideSkiaWidgets() { m_xUseSkia->hide(); m_xForceSkiaRaster->hide(); m_xSkiaStatusEnabled->hide(); m_xSkiaStatusDisabled->hide(); m_xSkiaLog->hide(); } void OfaViewTabPage::UpdateSkiaStatus() { #if HAVE_FEATURE_SKIA bool skiaHidden = true; // For now Skia is used mainly on Windows, enable the controls there. if (Application::GetToolkitName() == "win") skiaHidden = false; // It can also be used on Linux, but only with the rarely used 'gen' backend. if (Application::GetToolkitName() == "x11") skiaHidden = false; // OSX backend has Skia support too. if (Application::GetToolkitName() == "osx") skiaHidden = false; if (skiaHidden) { HideSkiaWidgets(); return; } // Easier than a custom translation string. bool bEnabled = SkiaHelper::isVCLSkiaEnabled(); m_xSkiaStatusEnabled->set_visible(bEnabled); m_xSkiaStatusDisabled->set_visible(!bEnabled); m_xUseSkia->set_sensitive(!officecfg::Office::Common::VCL::UseSkia::isReadOnly()); m_xUseSkiaImg->set_visible(officecfg::Office::Common::VCL::UseSkia::isReadOnly()); m_xForceSkiaRaster->set_sensitive(m_xUseSkia->get_active() && !officecfg::Office::Common::VCL::ForceSkiaRaster::isReadOnly()); m_xForceSkiaRasterImg->set_visible(officecfg::Office::Common::VCL::ForceSkiaRaster::isReadOnly()); m_xSkiaLog->set_sensitive(bEnabled); // Technically the 'use hardware acceleration' option could be used to mean !forceSkiaRaster, but the implementation // of the option is so tied to the implementation of the canvas module that it's simpler to ignore it. UpdateHardwareAccelStatus(); #else HideSkiaWidgets(); #endif } std::unique_ptr OfaViewTabPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrSet ) { return std::make_unique(pPage, pController, *rAttrSet); } OUString OfaViewTabPage::GetAllStrings() { OUString sAllStrings; OUString labels[] = { u"label16"_ustr, u"label1"_ustr, u"label6"_ustr, u"label15"_ustr, u"label14"_ustr, u"label8"_ustr, u"label9"_ustr, u"label4"_ustr, u"label12"_ustr, u"label2"_ustr, u"skiaenabled"_ustr, u"skiadisabled"_ustr, u"label5"_ustr, u"aafrom"_ustr }; for (const auto& label : labels) { if (const auto pString = m_xBuilder->weld_label(label)) sAllStrings += pString->get_label() + " "; } OUString checkButton[] = { u"useaccel"_ustr, u"useaa"_ustr, u"useskia"_ustr, u"forceskiaraster"_ustr, u"showfontpreview"_ustr, u"aafont"_ustr }; for (const auto& check : checkButton) { if (const auto pString = m_xBuilder->weld_check_button(check)) sAllStrings += pString->get_label() + " "; } sAllStrings += m_xSkiaLog->get_label() + " " + m_xRunGPTests->get_label() + " "; return sAllStrings.replaceAll("_", ""); } bool OfaViewTabPage::FillItemSet( SfxItemSet* ) { bool bModified = false; bool bRepaintWindows(false); std::shared_ptr xChanges(comphelper::ConfigurationChanges::create()); SvtMiscOptions aMiscOptions; const sal_Int32 nSizeLB_NewSelection = m_xIconSizeLB->get_active(); if( nSizeLB_InitialSelection != nSizeLB_NewSelection ) { // from now on it's modified, even if via auto setting the same size was set as now selected in the LB sal_Int16 eSet = SFX_SYMBOLS_SIZE_AUTO; switch( nSizeLB_NewSelection ) { case 0: eSet = SFX_SYMBOLS_SIZE_AUTO; break; case 1: eSet = SFX_SYMBOLS_SIZE_SMALL; break; case 2: eSet = SFX_SYMBOLS_SIZE_LARGE; break; case 3: eSet = SFX_SYMBOLS_SIZE_32; break; default: SAL_WARN("cui.options", "OfaViewTabPage::FillItemSet(): This state of m_xIconSizeLB should not be possible!"); } aMiscOptions.SetSymbolsSize( eSet ); } const sal_Int32 nSidebarSizeLB_NewSelection = m_xSidebarIconSizeLB->get_active(); if( nSidebarSizeLB_InitialSelection != nSidebarSizeLB_NewSelection ) { // from now on it's modified, even if via auto setting the same size was set as now selected in the LB ToolBoxButtonSize eSet = ToolBoxButtonSize::DontCare; switch( nSidebarSizeLB_NewSelection ) { case 0: eSet = ToolBoxButtonSize::DontCare; break; case 1: eSet = ToolBoxButtonSize::Small; break; case 2: eSet = ToolBoxButtonSize::Large; break; default: SAL_WARN("cui.options", "OfaViewTabPage::FillItemSet(): This state of m_xSidebarIconSizeLB should not be possible!"); } officecfg::Office::Common::Misc::SidebarIconSize::set(static_cast(eSet), xChanges); } const sal_Int32 nNotebookbarSizeLB_NewSelection = m_xNotebookbarIconSizeLB->get_active(); if( nNotebookbarSizeLB_InitialSelection != nNotebookbarSizeLB_NewSelection ) { // from now on it's modified, even if via auto setting the same size was set as now selected in the LB ToolBoxButtonSize eSet = ToolBoxButtonSize::DontCare; switch( nNotebookbarSizeLB_NewSelection ) { case 0: eSet = ToolBoxButtonSize::DontCare; break; case 1: eSet = ToolBoxButtonSize::Small; break; case 2: eSet = ToolBoxButtonSize::Large; break; default: SAL_WARN("cui.options", "OfaViewTabPage::FillItemSet(): This state of m_xNotebookbarIconSizeLB should not be possible!"); } officecfg::Office::Common::Misc::NotebookbarIconSize::set(static_cast(eSet), xChanges); } const sal_Int32 nStyleLB_NewSelection = m_xIconStyleLB->get_active(); if( nStyleLB_InitialSelection != nStyleLB_NewSelection ) { aMiscOptions.SetIconTheme(m_xIconStyleLB->get_active_id()); nStyleLB_InitialSelection = nStyleLB_NewSelection; } bool bAppearanceChanged = false; std::shared_ptr batch(comphelper::ConfigurationChanges::create()); // Middle Mouse Button MouseMiddleButtonAction eOldMiddleMouse = static_cast(officecfg::Office::Common::View::Dialog::MiddleMouseButton::get()); short eNewMiddleMouse = m_xMouseMiddleLB->get_active(); if(eNewMiddleMouse > 2) eNewMiddleMouse = 2; if ( eNewMiddleMouse != static_cast(eOldMiddleMouse) ) { officecfg::Office::Common::View::Dialog::MiddleMouseButton::set(eNewMiddleMouse, batch); bAppearanceChanged = true; } if (m_xFontAntiAliasing->get_state_changed_from_saved()) { bool b = m_xFontAntiAliasing->get_active(); officecfg::Office::Common::View::FontAntiAliasing::Enabled::set(b, batch); bAppearanceChanged = true; } if (m_xAAPointLimit->get_value_changed_from_saved()) { sal_Int64 i = m_xAAPointLimit->get_value(FieldUnit::PIXEL); officecfg::Office::Common::View::FontAntiAliasing::MinPixelHeight::set(i, batch); bAppearanceChanged = true; } if (m_xFontShowCB->get_state_changed_from_saved()) { officecfg::Office::Common::Font::View::ShowFontBoxWYSIWYG::set(m_xFontShowCB->get_active(), xChanges); bModified = true; } // #i95644# if disabled, do not use value, see in ::Reset() if (m_xUseHardwareAccell->get_sensitive()) { if(m_xUseHardwareAccell->get_state_changed_from_saved()) { pCanvasSettings->EnabledHardwareAcceleration(m_xUseHardwareAccell->get_active()); bModified = true; } } // #i95644# if disabled, do not use value, see in ::Reset() if (m_xUseAntiAliase->get_sensitive()) { if (m_xUseAntiAliase->get_active() != SvtOptionsDrawinglayer::IsAntiAliasing()) { SvtOptionsDrawinglayer::SetAntiAliasing(m_xUseAntiAliase->get_active(), /*bTemporary*/false); bModified = true; bRepaintWindows = true; } } if (m_xUseSkia->get_state_changed_from_saved() || m_xForceSkiaRaster->get_state_changed_from_saved()) { officecfg::Office::Common::VCL::UseSkia::set(m_xUseSkia->get_active(), xChanges); officecfg::Office::Common::VCL::ForceSkiaRaster::set(m_xForceSkiaRaster->get_active(), xChanges); bModified = true; } xChanges->commit(); if ( bAppearanceChanged ) { batch->commit(); SvtTabAppearanceCfg::SetApplicationDefaults ( GetpApp() ); } if(bRepaintWindows) { vcl::Window* pAppWindow = Application::GetFirstTopLevelWindow(); while(pAppWindow) { pAppWindow->Invalidate(); pAppWindow = Application::GetNextTopLevelWindow(pAppWindow); } } if (m_xUseSkia->get_state_changed_from_saved() || m_xForceSkiaRaster->get_state_changed_from_saved()) { SolarMutexGuard aGuard; if( svtools::executeRestartDialog( comphelper::getProcessComponentContext(), nullptr, svtools::RESTART_REASON_SKIA)) GetDialogController()->response(RET_OK); } return bModified; } void OfaViewTabPage::Reset( const SfxItemSet* ) { SvtMiscOptions aMiscOptions; bool bEnable = true; if (SvtMiscOptions::GetSymbolsSize() != SFX_SYMBOLS_SIZE_AUTO) { nSizeLB_InitialSelection = 1; if (SvtMiscOptions::GetSymbolsSize() == SFX_SYMBOLS_SIZE_LARGE) nSizeLB_InitialSelection = 2; else if (SvtMiscOptions::GetSymbolsSize() == SFX_SYMBOLS_SIZE_32) nSizeLB_InitialSelection = 3; } bEnable = !officecfg::Office::Common::Misc::SymbolSet::isReadOnly(); m_xIconSizeLB->set_active( nSizeLB_InitialSelection ); m_xIconSizeLabel->set_sensitive(bEnable); m_xIconSizeLB->set_sensitive(bEnable); m_xMoreIcons->set_sensitive(bEnable); m_xIconSizeImg->set_visible(!bEnable); m_xIconSizeLB->save_value(); ToolBoxButtonSize eSidebarIconSize = static_cast(officecfg::Office::Common::Misc::SidebarIconSize::get()); if( eSidebarIconSize == ToolBoxButtonSize::DontCare ) ; // do nothing else if( eSidebarIconSize == ToolBoxButtonSize::Small ) nSidebarSizeLB_InitialSelection = 1; else if( eSidebarIconSize == ToolBoxButtonSize::Large ) nSidebarSizeLB_InitialSelection = 2; bEnable = !officecfg::Office::Common::Misc::SidebarIconSize::isReadOnly(); m_xSidebarIconSizeLB->set_active( nSidebarSizeLB_InitialSelection ); m_xSidebarIconSizeLabel->set_sensitive(bEnable); m_xSidebarIconSizeLB->set_sensitive(bEnable); m_xSidebarIconSizeImg->set_visible(!bEnable); m_xSidebarIconSizeLB->save_value(); ToolBoxButtonSize eNotebookbarIconSize = static_cast(officecfg::Office::Common::Misc::NotebookbarIconSize::get()); if( eNotebookbarIconSize == ToolBoxButtonSize::DontCare ) ; // do nothing else if( eNotebookbarIconSize == ToolBoxButtonSize::Small ) nNotebookbarSizeLB_InitialSelection = 1; else if( eNotebookbarIconSize == ToolBoxButtonSize::Large ) nNotebookbarSizeLB_InitialSelection = 2; bEnable = !officecfg::Office::Common::Misc::NotebookbarIconSize::isReadOnly(); m_xNotebookbarIconSizeLB->set_active(nNotebookbarSizeLB_InitialSelection); m_xNotebookbarIconSizeLabel->set_sensitive(bEnable); m_xNotebookbarIconSizeLB->set_sensitive(bEnable); m_xNotebookbarIconSizeImg->set_visible(!bEnable); m_xNotebookbarIconSizeLB->save_value(); // tdf#153497 set name of automatic icon theme, it may have changed due to "Apply" while this page is visible UpdateIconThemes(); if (aMiscOptions.IconThemeWasSetAutomatically()) { nStyleLB_InitialSelection = 0; } else { const OUString selected = SvtMiscOptions::GetIconTheme(); const vcl::IconThemeInfo& selectedInfo = vcl::IconThemeInfo::FindIconThemeById(mInstalledIconThemes, selected); nStyleLB_InitialSelection = m_xIconStyleLB->find_text(selectedInfo.GetDisplayName()); } bEnable = !officecfg::Office::Common::Misc::SymbolStyle::isReadOnly(); m_xIconStyleLB->set_active(nStyleLB_InitialSelection); m_xIconStyleLabel->set_sensitive(bEnable); m_xIconStyleLB->set_sensitive(bEnable); m_xIconStyleImg->set_visible(!bEnable); m_xIconStyleLB->save_value(); // Middle Mouse Button bEnable = !officecfg::Office::Common::View::Dialog::MiddleMouseButton::isReadOnly(); sal_Int16 nMiddleMouseButton = officecfg::Office::Common::View::Dialog::MiddleMouseButton::get(); m_xMouseMiddleLB->set_active(static_cast(nMiddleMouseButton)); m_xMouseMiddleLabel->set_sensitive(bEnable); m_xMouseMiddleLB->set_sensitive(bEnable); m_xMouseMiddleImg->set_visible(!bEnable); m_xMouseMiddleLB->save_value(); bEnable = !officecfg::Office::Common::View::FontAntiAliasing::Enabled::isReadOnly(); bool bFontAntiAliasing = officecfg::Office::Common::View::FontAntiAliasing::Enabled::get(); m_xFontAntiAliasing->set_active( bFontAntiAliasing ); m_xFontAntiAliasing->set_sensitive(bEnable); m_xFontAntiAliasingImg->set_visible(!bEnable); bEnable = !officecfg::Office::Common::View::FontAntiAliasing::MinPixelHeight::isReadOnly(); sal_Int16 nFontAntiAliasingMinPixelHeight = officecfg::Office::Common::View::FontAntiAliasing::MinPixelHeight::get(); m_xAAPointLimit->set_value(nFontAntiAliasingMinPixelHeight, FieldUnit::PIXEL); m_xAAPointLimit->set_sensitive(bEnable); m_xAAPointLimitLabelImg->set_visible(!bEnable); // WorkingSet bEnable = !officecfg::Office::Common::Font::View::ShowFontBoxWYSIWYG::isReadOnly(); m_xFontShowCB->set_active(officecfg::Office::Common::Font::View::ShowFontBoxWYSIWYG::get()); m_xFontShowCB->set_sensitive(bEnable); m_xFontShowImg->set_visible(!bEnable); UpdateHardwareAccelStatus(); m_xUseHardwareAccell->save_state(); { // #i95644# AntiAliasing m_xUseAntiAliase->set_active(SvtOptionsDrawinglayer::IsAntiAliasing()); bEnable = !officecfg::Office::Common::Drawinglayer::AntiAliasing::isReadOnly(); m_xUseAntiAliase->set_sensitive(bEnable); m_xUseAntiAliaseImg->set_visible(!bEnable); m_xUseAntiAliase->save_state(); } m_xUseSkia->set_active(officecfg::Office::Common::VCL::UseSkia::get()); m_xForceSkiaRaster->set_active(officecfg::Office::Common::VCL::ForceSkiaRaster::get()); m_xUseSkia->save_state(); m_xForceSkiaRaster->save_state(); m_xFontAntiAliasing->save_state(); m_xAAPointLimit->save_value(); m_xFontShowCB->save_state(); OnAntialiasingToggled(*m_xFontAntiAliasing); UpdateSkiaStatus(); } void OfaViewTabPage::UpdateHardwareAccelStatus() { // #i95644# HW accel (unified to disable mechanism) if(pCanvasSettings->IsHardwareAccelerationAvailable()) { m_xUseHardwareAccell->set_active(pCanvasSettings->IsHardwareAccelerationEnabled()); m_xUseHardwareAccell->set_sensitive(!pCanvasSettings->IsHardwareAccelerationRO()); m_xUseHardwareAccellImg->set_visible(pCanvasSettings->IsHardwareAccelerationRO()); } else { m_xUseHardwareAccell->set_active(false); m_xUseHardwareAccell->set_sensitive(false); m_xUseHardwareAccellImg->set_visible(true); } #if HAVE_FEATURE_SKIA m_xUseHardwareAccell->set_sensitive(!m_xUseSkia->get_active()); #endif } struct LanguageConfig_Impl { SvtCTLOptions aCTLLanguageOptions; SvtSysLocaleOptions aSysLocaleOptions; SvtLinguConfig aLinguConfig; }; static bool bLanguageCurrentDoc_Impl = false; // some things we'll need... constexpr OUString sAccessSrvc = u"com.sun.star.configuration.ConfigurationAccess"_ustr; constexpr OUStringLiteral sAccessUpdSrvc = u"com.sun.star.configuration.ConfigurationUpdateAccess"; constexpr OUString sInstalledLocalesPath = u"org.openoffice.Setup/Office/InstalledLocales"_ustr; constexpr OUString sUserLocalePath = u"org.openoffice.Office.Linguistic/General"_ustr; constexpr OUString sUserLocaleKey = u"UILocale"_ustr; static Sequence< OUString > seqInstalledLanguages; static OUString lcl_getDatePatternsConfigString( const LocaleDataWrapper& rLocaleWrapper ) { const Sequence< OUString >& aDateAcceptancePatterns = rLocaleWrapper.getDateAcceptancePatterns(); sal_Int32 nPatterns = aDateAcceptancePatterns.getLength(); OUStringBuffer aBuf( nPatterns * 6 ); // 6 := length of Y-M-D; SAL_WARN_IF( !nPatterns, "cui.options", "No date acceptance pattern"); if (nPatterns) { aBuf.append(aDateAcceptancePatterns[0]); for (sal_Int32 i=1; i < nPatterns; ++i) aBuf.append(";" + aDateAcceptancePatterns[i]); } return aBuf.makeStringAndClear(); } namespace { //what ui language will be selected by default if the user override of General::UILocale is unset ? LanguageTag GetInstalledLocaleForSystemUILanguage() { css::uno::Sequence inst(officecfg::Setup::Office::InstalledLocales::get()->getElementNames()); return LanguageTag(getInstalledLocaleForSystemUILanguage(inst, false)).makeFallback(); } } OfaLanguagesTabPage::OfaLanguagesTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rSet) : SfxTabPage(pPage, pController, u"cui/ui/optlanguagespage.ui"_ustr, u"OptLanguagesPage"_ustr, &rSet) , pLangConfig(new LanguageConfig_Impl) , m_bDatePatternsValid(false) , m_xUserInterfaceLB(m_xBuilder->weld_combo_box(u"userinterface"_ustr)) , m_xLocaleSettingFT(m_xBuilder->weld_label(u"localesettingFT"_ustr)) , m_xLocaleSettingLB(new SvxLanguageBox(m_xBuilder->weld_combo_box(u"localesetting"_ustr))) , m_xLocaleSettingImg(m_xBuilder->weld_widget(u"locklocalesetting"_ustr)) , m_xDecimalSeparatorFT(m_xBuilder->weld_label(u"label6"_ustr)) , m_xDecimalSeparatorCB(m_xBuilder->weld_check_button(u"decimalseparator"_ustr)) , m_xDecimalSeparatorImg(m_xBuilder->weld_widget(u"lockdecimalseparator"_ustr)) , m_xCurrencyFT(m_xBuilder->weld_label(u"defaultcurrency"_ustr)) , m_xCurrencyLB(m_xBuilder->weld_combo_box(u"currencylb"_ustr)) , m_xCurrencyImg(m_xBuilder->weld_widget(u"lockcurrencylb"_ustr)) , m_xDatePatternsFT(m_xBuilder->weld_label(u"dataaccpatterns"_ustr)) , m_xDatePatternsED(m_xBuilder->weld_entry(u"datepatterns"_ustr)) , m_xDatePatternsImg(m_xBuilder->weld_widget(u"lockdatepatterns"_ustr)) , m_xWesternLanguageLB(new SvxLanguageBox(m_xBuilder->weld_combo_box(u"westernlanguage"_ustr))) , m_xWesternLanguageFT(m_xBuilder->weld_label(u"western"_ustr)) , m_xWesternLanguageImg(m_xBuilder->weld_widget(u"lockwesternlanguage"_ustr)) , m_xAsianLanguageLB(new SvxLanguageBox(m_xBuilder->weld_combo_box(u"asianlanguage"_ustr))) , m_xComplexLanguageLB(new SvxLanguageBox(m_xBuilder->weld_combo_box(u"complexlanguage"_ustr))) , m_xCurrentDocCB(m_xBuilder->weld_check_button(u"currentdoc"_ustr)) , m_xAsianSupportCB(m_xBuilder->weld_check_button(u"asiansupport"_ustr)) , m_xAsianSupportImg(m_xBuilder->weld_widget(u"lockasiansupport"_ustr)) , m_xCTLSupportCB(m_xBuilder->weld_check_button(u"ctlsupport"_ustr)) , m_xCTLSupportImg(m_xBuilder->weld_widget(u"lockctlsupport"_ustr)) , m_xIgnoreLanguageChangeCB(m_xBuilder->weld_check_button(u"ignorelanguagechange"_ustr)) , m_xIgnoreLanguageChangeImg(m_xBuilder->weld_widget(u"lockignorelanguagechange"_ustr)) { // tdf#125483 save original default label m_sDecimalSeparatorLabel = m_xDecimalSeparatorCB->get_label(); // initialize user interface language selection m_sSystemDefaultString = SvtLanguageTable::GetLanguageString( LANGUAGE_SYSTEM ); OUString aUILang = m_sSystemDefaultString + " - " + SvtLanguageTable::GetLanguageString(GetInstalledLocaleForSystemUILanguage().getLanguageType()); m_xUserInterfaceLB->append(u"0"_ustr, aUILang); m_xUserInterfaceLB->append_separator(u""_ustr); try { Reference< XMultiServiceFactory > theConfigProvider( css::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); // find out which locales are currently installed and add them to the listbox Sequence< Any > theArgs{ Any(NamedValue(u"nodepath"_ustr, Any(sInstalledLocalesPath))) }; Reference< XNameAccess > theNameAccess( theConfigProvider->createInstanceWithArguments(sAccessSrvc, theArgs ), UNO_QUERY_THROW ); seqInstalledLanguages = theNameAccess->getElementNames(); LanguageType aLang = LANGUAGE_DONTKNOW; std::vector< std::pair > aUILanguages; for (sal_Int32 i=0; iappend(OUString::number(nGroupID), sGroupName); } m_xUserInterfaceLB->set_active(0); // find out whether the user has a specific locale specified Sequence< Any > theArgs2{ Any(NamedValue(u"nodepath"_ustr, Any(sUserLocalePath))) }; theNameAccess.set( theConfigProvider->createInstanceWithArguments(sAccessSrvc, theArgs2 ), UNO_QUERY_THROW ); if (theNameAccess->hasByName(sUserLocaleKey)) theNameAccess->getByName(sUserLocaleKey) >>= m_sUserLocaleValue; // select the user specified locale in the listbox if (!m_sUserLocaleValue.isEmpty()) { for (sal_Int32 i = 0, nEntryCount = m_xUserInterfaceLB->get_count(); i < nEntryCount; ++i) { sal_Int32 d = m_xUserInterfaceLB->get_id(i).toInt32(); if ( d > 0 && seqInstalledLanguages.getLength() > d-1 && seqInstalledLanguages[d-1] == m_sUserLocaleValue) m_xUserInterfaceLB->set_active(i); } } } catch (const Exception &) { // we'll just leave the box in its default setting and won't // even give it event handler... TOOLS_WARN_EXCEPTION("cui.options", "ignoring" ); } m_xWesternLanguageLB->SetLanguageList( SvxLanguageListFlags::WESTERN | SvxLanguageListFlags::ONLY_KNOWN, true, false, true, true, LANGUAGE_SYSTEM, css::i18n::ScriptType::LATIN); m_xAsianLanguageLB->SetLanguageList( SvxLanguageListFlags::CJK | SvxLanguageListFlags::ONLY_KNOWN, true, false, true, true, LANGUAGE_SYSTEM, css::i18n::ScriptType::ASIAN); m_xComplexLanguageLB->SetLanguageList( SvxLanguageListFlags::CTL | SvxLanguageListFlags::ONLY_KNOWN, true, false, true, true, LANGUAGE_SYSTEM, css::i18n::ScriptType::COMPLEX); m_xLocaleSettingLB->SetLanguageList( SvxLanguageListFlags::ALL | SvxLanguageListFlags::ONLY_KNOWN, false, false, false, true, LANGUAGE_USER_SYSTEM_CONFIG, css::i18n::ScriptType::WEAK); const NfCurrencyTable& rCurrTab = SvNumberFormatter::GetTheCurrencyTable(); const NfCurrencyEntry& rCurr = SvNumberFormatter::GetCurrencyEntry( LANGUAGE_SYSTEM ); // insert SYSTEM entry OUString aDefaultCurr = m_sSystemDefaultString + " - " + rCurr.GetBankSymbol(); m_xCurrencyLB->append(u"default"_ustr, aDefaultCurr); m_xCurrencyLB->append_separator(u""_ustr); assert(m_xCurrencyLB->find_id(u"default"_ustr) != -1); // all currencies OUString aTwoSpace( u" "_ustr ); sal_uInt16 nCurrCount = rCurrTab.size(); std::vector< const NfCurrencyEntry* > aCurrencies; // first entry is SYSTEM, skip it for ( sal_uInt16 j=1; j < nCurrCount; ++j ) { aCurrencies.push_back(&rCurrTab[j]); } std::sort(aCurrencies.begin(), aCurrencies.end(), [](const NfCurrencyEntry* c1, const NfCurrencyEntry* c2) { return c1->GetBankSymbol().compareTo(c2->GetBankSymbol()) < 0; }); for (auto &v : aCurrencies) { OUString aStr_ = v->GetBankSymbol() + aTwoSpace + v->GetSymbol(); aStr_ = ApplyLreOrRleEmbedding( aStr_ ) + aTwoSpace + ApplyLreOrRleEmbedding( SvtLanguageTable::GetLanguageString( v->GetLanguage() ) ); m_xCurrencyLB->append(weld::toId(v), aStr_); } m_xCurrencyLB->set_active(0); m_xLocaleSettingLB->connect_changed( LINK( this, OfaLanguagesTabPage, LocaleSettingHdl ) ); m_xDatePatternsED->connect_changed( LINK( this, OfaLanguagesTabPage, DatePatternsHdl ) ); Link aLink( LINK( this, OfaLanguagesTabPage, SupportHdl ) ); m_xAsianSupportCB->connect_toggled( aLink ); m_xCTLSupportCB->connect_toggled( aLink ); m_bOldAsian = SvtCJKOptions::IsAnyEnabled(); m_xAsianSupportCB->set_active(m_bOldAsian); m_xAsianSupportCB->save_state(); bool bReadonly = SvtCJKOptions::IsAnyReadOnly(); m_xAsianSupportCB->set_sensitive(!bReadonly); m_xAsianSupportImg->set_visible(bReadonly); SupportHdl(*m_xAsianSupportCB); m_bOldCtl = SvtCTLOptions::IsCTLFontEnabled(); m_xCTLSupportCB->set_active(m_bOldCtl); m_xCTLSupportCB->save_state(); bReadonly = pLangConfig->aCTLLanguageOptions.IsReadOnly(SvtCTLOptions::E_CTLFONT); m_xCTLSupportCB->set_sensitive(!bReadonly); m_xCTLSupportImg->set_visible(bReadonly); SupportHdl(*m_xCTLSupportCB); m_xIgnoreLanguageChangeCB->set_active( pLangConfig->aSysLocaleOptions.IsIgnoreLanguageChange() ); } OfaLanguagesTabPage::~OfaLanguagesTabPage() { } std::unique_ptr OfaLanguagesTabPage::Create( weld::Container* pPage, weld::DialogController* pController, const SfxItemSet* rAttrSet ) { return std::make_unique(pPage, pController, *rAttrSet); } static void lcl_Update(std::unique_ptr pInvalidItems[], std::unique_ptr pBoolItems[], sal_uInt16 nCount) { SfxViewFrame* pCurrentFrm = SfxViewFrame::Current(); SfxViewFrame* pViewFrm = SfxViewFrame::GetFirst(); while(pViewFrm) { SfxBindings& rBind = pViewFrm->GetBindings(); for(sal_uInt16 i = 0; i < nCount; i++) { if(pCurrentFrm == pViewFrm) rBind.InvalidateAll(false); rBind.SetState( *pInvalidItems[i] ); rBind.SetState( *pBoolItems[i] ); } pViewFrm = SfxViewFrame::GetNext(*pViewFrm); } } OUString OfaLanguagesTabPage::GetAllStrings() { OUString sAllStrings; OUString labels[] = { u"label1"_ustr, u"label4"_ustr, u"label7"_ustr, u"localesettingFT"_ustr, u"defaultcurrency"_ustr, u"label6"_ustr, u"dataaccpatterns"_ustr, u"label2"_ustr, u"western"_ustr, u"label3"_ustr }; for (const auto& label : labels) { if (const auto pString = m_xBuilder->weld_label(label)) sAllStrings += pString->get_label() + " "; } OUString checkButton[] = { u"decimalseparator"_ustr, u"asiansupport"_ustr, u"ctlsupport"_ustr, u"currentdoc"_ustr, u"ignorelanguagechange"_ustr }; for (const auto& check : checkButton) { if (const auto pString = m_xBuilder->weld_check_button(check)) sAllStrings += pString->get_label() + " "; } return sAllStrings.replaceAll("_", ""); } bool OfaLanguagesTabPage::FillItemSet( SfxItemSet* rSet ) { // lock configuration broadcasters so that we can coordinate the notifications pLangConfig->aSysLocaleOptions.BlockBroadcasts( true ); pLangConfig->aCTLLanguageOptions.BlockBroadcasts( true ); pLangConfig->aLinguConfig.BlockBroadcasts( true ); /* * Sequence checking only matters when CTL support is enabled. * * So we only need to check for sequence checking if * a) previously it was unchecked and is now checked or * b) it was already checked but the CTL language has changed */ if ( m_xCTLSupportCB->get_active() && (m_xCTLSupportCB->get_saved_state() != TRISTATE_TRUE || m_xComplexLanguageLB->get_active_id_changed_from_saved()) ) { //sequence checking has to be switched on depending on the selected CTL language LanguageType eCTLLang = m_xComplexLanguageLB->get_active_id(); bool bOn = MsLangId::needsSequenceChecking( eCTLLang); pLangConfig->aCTLLanguageOptions.SetCTLSequenceCheckingRestricted(bOn); pLangConfig->aCTLLanguageOptions.SetCTLSequenceChecking(bOn); pLangConfig->aCTLLanguageOptions.SetCTLSequenceCheckingTypeAndReplace(bOn); } try { // handle settings for UI Language // a change of setting needs to bring up a warning message OUString aLangString; sal_Int32 d = m_xUserInterfaceLB->get_active_id().toInt32(); if( d > 0 && seqInstalledLanguages.getLength() > d-1) aLangString = seqInstalledLanguages[d-1]; /* if( m_xUserInterfaceLB->GetSelectedEntryPos() > 0) aLangString = ConvertLanguageToIsoString(m_xUserInterfaceLB->get_active_id()); */ Reference< XMultiServiceFactory > theConfigProvider( css::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); Sequence< Any > theArgs{ Any(NamedValue(u"nodepath"_ustr, Any(sUserLocalePath))) }; Reference< XPropertySet >xProp( theConfigProvider->createInstanceWithArguments(sAccessUpdSrvc, theArgs ), UNO_QUERY_THROW ); if ( m_sUserLocaleValue != aLangString) { // OSL_FAIL("UserInterface language was changed, restart."); // write new value xProp->setPropertyValue(sUserLocaleKey, Any(aLangString)); Reference< XChangesBatch >(xProp, UNO_QUERY_THROW)->commitChanges(); // display info SolarMutexGuard aGuard; if (svtools::executeRestartDialog( comphelper::getProcessComponentContext(), GetFrameWeld(), svtools::RESTART_REASON_LANGUAGE_CHANGE)) GetDialogController()->response(RET_OK); // tell quickstarter to stop being a veto listener const Reference< XComponentContext >& xContext( comphelper::getProcessComponentContext()); css::office::Quickstart::createAndSetVeto(xContext, false, false, false/*DisableVeto*/); } } catch (const Exception&) { // we'll just leave the box in its default setting and won't // even give it event handler... TOOLS_WARN_EXCEPTION("cui.options", "ignoring"); } LanguageTag aLanguageTag( pLangConfig->aSysLocaleOptions.GetLanguageTag()); LanguageType eOldLocale = (aLanguageTag.isSystemLocale() ? LANGUAGE_SYSTEM : aLanguageTag.makeFallback().getLanguageType()); LanguageType eNewLocale = m_xLocaleSettingLB->get_active_id(); // If the "Default ..." entry was selected that means SYSTEM, the actual // eNewLocale value is temporary for the dialog only, do not resolve to // what system currently is. if (eNewLocale == LANGUAGE_USER_SYSTEM_CONFIG) eNewLocale = LANGUAGE_SYSTEM; if ( eOldLocale != eNewLocale ) { // an empty string denotes SYSTEM locale OUString sNewLang; if ( eNewLocale != LANGUAGE_SYSTEM ) sNewLang = LanguageTag::convertToBcp47( eNewLocale); // locale nowadays get to AppSettings via notification // this will happen after releasing the lock on the ConfigurationBroadcaster at // the end of this method pLangConfig->aSysLocaleOptions.SetLocaleConfigString( sNewLang ); rSet->Put( SfxBoolItem( SID_OPT_LOCALE_CHANGED, true ) ); SvtScriptType nNewType = SvtLanguageOptions::GetScriptTypeOfLanguage( eNewLocale ); bool bNewCJK = bool( nNewType & SvtScriptType::ASIAN ); auto batch = comphelper::ConfigurationChanges::create(); SvtCompatibilityDefault aCompatOpts(batch); aCompatOpts.set(u"ExpandWordSpace"_ustr, !bNewCJK); batch->commit(); } if(m_xDecimalSeparatorCB->get_state_changed_from_saved()) pLangConfig->aSysLocaleOptions.SetDecimalSeparatorAsLocale(m_xDecimalSeparatorCB->get_active()); if(m_xIgnoreLanguageChangeCB->get_state_changed_from_saved()) pLangConfig->aSysLocaleOptions.SetIgnoreLanguageChange(m_xIgnoreLanguageChangeCB->get_active()); // Configured currency, for example, USD-en-US or EUR-de-DE, or empty for locale default. OUString sOldCurr = pLangConfig->aSysLocaleOptions.GetCurrencyConfigString(); OUString sId = m_xCurrencyLB->get_active_id(); const NfCurrencyEntry* pCurr = sId == "default" ? nullptr : weld::fromId(sId); OUString sNewCurr; if ( pCurr ) sNewCurr = SvtSysLocaleOptions::CreateCurrencyConfigString( pCurr->GetBankSymbol(), pCurr->GetLanguage() ); if ( sOldCurr != sNewCurr ) pLangConfig->aSysLocaleOptions.SetCurrencyConfigString( sNewCurr ); // Configured date acceptance patterns, for example Y-M-D;M-D or empty for // locale default. if (m_bDatePatternsValid && m_xDatePatternsED->get_value_changed_from_saved()) pLangConfig->aSysLocaleOptions.SetDatePatternsConfigString( m_xDatePatternsED->get_text()); SfxObjectShell* pCurrentDocShell = SfxObjectShell::Current(); Reference< css::linguistic2::XLinguProperties > xLinguProp = LinguMgr::GetLinguPropertySet(); bool bCurrentDocCBChecked = m_xCurrentDocCB->get_active(); if (m_xCurrentDocCB->get_sensitive()) bLanguageCurrentDoc_Impl = bCurrentDocCBChecked; bool bCurrentDocCBChanged = m_xCurrentDocCB->get_state_changed_from_saved(); bool bValChanged = m_xWesternLanguageLB->get_active_id_changed_from_saved(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_xWesternLanguageLB->get_active_id(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; pLangConfig->aLinguConfig.SetProperty( u"DefaultLocale", aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale( aLocale ); } if(pCurrentDocShell) { rSet->Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, css::i18n::ScriptType::LATIN), SID_ATTR_LANGUAGE)); } } bValChanged = m_xAsianLanguageLB->get_active_id_changed_from_saved(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_xAsianLanguageLB->get_active_id(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; pLangConfig->aLinguConfig.SetProperty( u"DefaultLocale_CJK", aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale_CJK( aLocale ); } if(pCurrentDocShell) { rSet->Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, css::i18n::ScriptType::ASIAN), SID_ATTR_CHAR_CJK_LANGUAGE)); } } bValChanged = m_xComplexLanguageLB->get_active_id_changed_from_saved(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_xComplexLanguageLB->get_active_id(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; pLangConfig->aLinguConfig.SetProperty( u"DefaultLocale_CTL", aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale_CTL( aLocale ); } if(pCurrentDocShell) { rSet->Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, css::i18n::ScriptType::COMPLEX), SID_ATTR_CHAR_CTL_LANGUAGE)); } } if(m_xAsianSupportCB->get_state_changed_from_saved() ) { bool bChecked = m_xAsianSupportCB->get_active(); SvtCJKOptions::SetAll(bChecked); //iterate over all bindings to invalidate vertical text direction const sal_uInt16 STATE_COUNT = 2; std::unique_ptr pBoolItems[STATE_COUNT]; pBoolItems[0].reset(new SfxBoolItem(SID_VERTICALTEXT_STATE, false)); pBoolItems[1].reset(new SfxBoolItem(SID_TEXT_FITTOSIZE_VERTICAL, false)); std::unique_ptr pInvalidItems[STATE_COUNT]; pInvalidItems[0].reset(new SfxVoidItem(SID_VERTICALTEXT_STATE)); pInvalidItems[1].reset(new SfxVoidItem(SID_TEXT_FITTOSIZE_VERTICAL)); lcl_Update(pInvalidItems, pBoolItems, STATE_COUNT); } if ( m_xCTLSupportCB->get_state_changed_from_saved() ) { SvtSearchOptions aOpt; aOpt.SetIgnoreDiacritics_CTL(true); aOpt.SetIgnoreKashida_CTL(true); aOpt.Commit(); pLangConfig->aCTLLanguageOptions.SetCTLFontEnabled( m_xCTLSupportCB->get_active() ); const sal_uInt16 STATE_COUNT = 1; std::unique_ptr pBoolItems[STATE_COUNT]; pBoolItems[0].reset(new SfxBoolItem(SID_CTLFONT_STATE, false)); std::unique_ptr pInvalidItems[STATE_COUNT]; pInvalidItems[0].reset(new SfxVoidItem(SID_CTLFONT_STATE)); lcl_Update(pInvalidItems, pBoolItems, STATE_COUNT); } if ( pLangConfig->aSysLocaleOptions.IsModified() ) pLangConfig->aSysLocaleOptions.Commit(); // first release the lock on the ConfigurationBroadcaster for Locale changes // it seems that our code relies on the fact that before other changes like e.g. currency // are broadcasted locale changes have been done pLangConfig->aSysLocaleOptions.BlockBroadcasts( false ); pLangConfig->aCTLLanguageOptions.BlockBroadcasts( false ); pLangConfig->aLinguConfig.BlockBroadcasts( false ); return false; } void OfaLanguagesTabPage::Reset( const SfxItemSet* rSet ) { LanguageTag aLanguageTag( pLangConfig->aSysLocaleOptions.GetLanguageTag()); if ( aLanguageTag.isSystemLocale() ) m_xLocaleSettingLB->set_active_id( LANGUAGE_USER_SYSTEM_CONFIG ); else m_xLocaleSettingLB->set_active_id( aLanguageTag.makeFallback().getLanguageType()); bool bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::EOption::Locale); m_xLocaleSettingLB->set_sensitive(!bReadonly); m_xLocaleSettingFT->set_sensitive(!bReadonly); m_xLocaleSettingImg->set_visible(bReadonly); m_xDecimalSeparatorCB->set_active( pLangConfig->aSysLocaleOptions.IsDecimalSeparatorAsLocale()); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::EOption::DecimalSeparator); m_xDecimalSeparatorCB->set_sensitive(!bReadonly); m_xDecimalSeparatorFT->set_sensitive(!bReadonly); m_xDecimalSeparatorImg->set_visible(bReadonly); m_xDecimalSeparatorCB->save_state(); m_xIgnoreLanguageChangeCB->set_active( pLangConfig->aSysLocaleOptions.IsIgnoreLanguageChange()); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::EOption::IgnoreLanguageChange); m_xIgnoreLanguageChangeCB->set_sensitive(!bReadonly); m_xIgnoreLanguageChangeImg->set_visible(bReadonly); m_xIgnoreLanguageChangeCB->save_state(); // let LocaleSettingHdl enable/disable checkboxes for CJK/CTL support // #i15812# must be done *before* the configured currency is set // and update the decimal separator used for the given locale LocaleSettingHdl(*m_xLocaleSettingLB->get_widget()); // configured currency, for example, USD-en-US or EUR-de-DE, or empty for locale default const NfCurrencyEntry* pCurr = nullptr; OUString sCurrency = pLangConfig->aSysLocaleOptions.GetCurrencyConfigString(); if ( !sCurrency.isEmpty() ) { LanguageType eLang; OUString aAbbrev; SvtSysLocaleOptions::GetCurrencyAbbrevAndLanguage( aAbbrev, eLang, sCurrency ); pCurr = SvNumberFormatter::GetCurrencyEntry( aAbbrev, eLang ); } // if pCurr==nullptr the SYSTEM entry is selected OUString sId = !pCurr ? u"default"_ustr : weld::toId(pCurr); m_xCurrencyLB->set_active_id(sId); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::EOption::Currency); m_xCurrencyLB->set_sensitive(!bReadonly); m_xCurrencyFT->set_sensitive(!bReadonly); m_xCurrencyImg->set_visible(bReadonly); // date acceptance patterns OUString aDatePatternsString = pLangConfig->aSysLocaleOptions.GetDatePatternsConfigString(); if (aDatePatternsString.isEmpty()) { const LocaleDataWrapper& rLocaleWrapper( Application::GetSettings().GetLocaleDataWrapper() ); aDatePatternsString = lcl_getDatePatternsConfigString( rLocaleWrapper); // Let's assume patterns are valid at this point. m_bDatePatternsValid = true; } else { bool bModified = false; m_bDatePatternsValid = validateDatePatterns( bModified, aDatePatternsString); } m_xDatePatternsED->set_text(aDatePatternsString); m_xDatePatternsED->set_message_type( m_bDatePatternsValid ? weld::EntryMessageType::Normal : weld::EntryMessageType::Error); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::EOption::DatePatterns); m_xDatePatternsED->set_sensitive(!bReadonly); m_xDatePatternsFT->set_sensitive(!bReadonly); m_xDatePatternsImg->set_visible(bReadonly); m_xDatePatternsED->save_value(); //western/CJK/CLK language LanguageType eCurLang = LANGUAGE_NONE; LanguageType eCurLangCJK = LANGUAGE_NONE; LanguageType eCurLangCTL = LANGUAGE_NONE; SfxObjectShell* pCurrentDocShell = SfxObjectShell::Current(); //collect the configuration values first m_xCurrentDocCB->set_sensitive(false); Any aWestLang; Any aCJKLang; Any aCTLLang; try { aWestLang = pLangConfig->aLinguConfig.GetProperty(u"DefaultLocale"); Locale aLocale; aWestLang >>= aLocale; eCurLang = LanguageTag::convertToLanguageType( aLocale, false); aCJKLang = pLangConfig->aLinguConfig.GetProperty(u"DefaultLocale_CJK"); aLocale = Locale(); aCJKLang >>= aLocale; eCurLangCJK = LanguageTag::convertToLanguageType( aLocale, false); aCTLLang = pLangConfig->aLinguConfig.GetProperty(u"DefaultLocale_CTL"); aLocale = Locale(); aCTLLang >>= aLocale; eCurLangCTL = LanguageTag::convertToLanguageType( aLocale, false); } catch (const Exception&) { } //overwrite them by the values provided by the DocShell if(pCurrentDocShell) { m_xCurrentDocCB->set_sensitive(true); m_xCurrentDocCB->set_active(bLanguageCurrentDoc_Impl); if( const SvxLanguageItem* pLangItem = rSet->GetItemIfSet(SID_ATTR_LANGUAGE, false)) { LanguageType eTempCurLang = pLangItem->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLang, css::i18n::ScriptType::LATIN) != eTempCurLang) eCurLang = eTempCurLang; } if( const SvxLanguageItem* pLang = rSet->GetItemIfSet(SID_ATTR_CHAR_CJK_LANGUAGE, false)) { LanguageType eTempCurLang = pLang->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLangCJK, css::i18n::ScriptType::ASIAN) != eTempCurLang) eCurLangCJK = eTempCurLang; } if( const SvxLanguageItem* pLang = rSet->GetItemIfSet(SID_ATTR_CHAR_CTL_LANGUAGE, false)) { LanguageType eTempCurLang = pLang->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLangCTL, css::i18n::ScriptType::COMPLEX) != eTempCurLang) eCurLangCTL = eTempCurLang; } } if(LANGUAGE_NONE == eCurLang || LANGUAGE_DONTKNOW == eCurLang) m_xWesternLanguageLB->set_active_id(LANGUAGE_NONE); else m_xWesternLanguageLB->set_active_id(eCurLang); if(LANGUAGE_NONE == eCurLangCJK || LANGUAGE_DONTKNOW == eCurLangCJK) m_xAsianLanguageLB->set_active_id(LANGUAGE_NONE); else m_xAsianLanguageLB->set_active_id(eCurLangCJK); if(LANGUAGE_NONE == eCurLangCTL || LANGUAGE_DONTKNOW == eCurLangCTL) m_xComplexLanguageLB->set_active_id(LANGUAGE_NONE); else m_xComplexLanguageLB->set_active_id(eCurLangCTL); m_xWesternLanguageLB->save_active_id(); m_xAsianLanguageLB->save_active_id(); m_xComplexLanguageLB->save_active_id(); m_xIgnoreLanguageChangeCB->save_state(); m_xCurrentDocCB->save_state(); bool bEnable = !pLangConfig->aLinguConfig.IsReadOnly( u"DefaultLocale" ); m_xWesternLanguageFT->set_sensitive( bEnable ); m_xWesternLanguageLB->set_sensitive( bEnable ); m_xWesternLanguageImg->set_visible( !bEnable ); // check the box "For the current document only" // set the focus to the Western Language box const SfxBoolItem* pLang = rSet->GetItemIfSet(SID_SET_DOCUMENT_LANGUAGE, false ); if ( pLang && pLang->GetValue() ) { m_xWesternLanguageLB->grab_focus(); m_xCurrentDocCB->set_sensitive(true); m_xCurrentDocCB->set_active(true); } } IMPL_LINK(OfaLanguagesTabPage, SupportHdl, weld::Toggleable&, rBox, void) { bool bCheck = rBox.get_active(); if ( m_xAsianSupportCB.get() == &rBox ) { bool bReadonly = pLangConfig->aLinguConfig.IsReadOnly(u"DefaultLocale_CJK"); bCheck = ( bCheck && !bReadonly ); m_xAsianLanguageLB->set_sensitive( bCheck ); if (rBox.get_sensitive()) m_bOldAsian = bCheck; } else if ( m_xCTLSupportCB.get() == &rBox ) { bool bReadonly = pLangConfig->aLinguConfig.IsReadOnly(u"DefaultLocale_CTL"); bCheck = ( bCheck && !bReadonly ); m_xComplexLanguageLB->set_sensitive( bCheck ); if (rBox.get_sensitive()) m_bOldCtl = bCheck; } else SAL_WARN( "cui.options", "OfaLanguagesTabPage::SupportHdl(): wrong rBox" ); } namespace { void lcl_checkLanguageCheckBox(weld::CheckButton& _rCB, bool _bNewValue, bool _bOldValue) { if ( _bNewValue ) _rCB.set_active(true); else _rCB.set_active( _bOldValue ); // #i15082# do not call save_state() in running dialog... // _rCB.save_state(); _rCB.set_sensitive( !_bNewValue ); } } IMPL_LINK_NOARG(OfaLanguagesTabPage, LocaleSettingHdl, weld::ComboBox&, void) { LanguageType eLang = m_xLocaleSettingLB->get_active_id(); SvtScriptType nType = SvtLanguageOptions::GetScriptTypeOfLanguage(eLang); // first check if CTL must be enabled // #103299# - if CTL font setting is not readonly if(!pLangConfig->aCTLLanguageOptions.IsReadOnly(SvtCTLOptions::E_CTLFONT)) { bool bIsCTLFixed = bool(nType & SvtScriptType::COMPLEX); lcl_checkLanguageCheckBox(*m_xCTLSupportCB, bIsCTLFixed, m_bOldCtl); SupportHdl(*m_xCTLSupportCB); } // second check if CJK must be enabled // #103299# - if CJK support is not readonly if(!SvtCJKOptions::IsAnyReadOnly()) { bool bIsCJKFixed = bool(nType & SvtScriptType::ASIAN); lcl_checkLanguageCheckBox(*m_xAsianSupportCB, bIsCJKFixed, m_bOldAsian); SupportHdl(*m_xAsianSupportCB); } const NfCurrencyEntry& rCurr = SvNumberFormatter::GetCurrencyEntry( (eLang == LANGUAGE_USER_SYSTEM_CONFIG) ? MsLangId::getConfiguredSystemLanguage() : eLang); static constexpr OUString aDefaultID = u"default"_ustr; // Update the "Default ..." currency. m_xCurrencyLB->remove_id(aDefaultID); OUString aDefaultCurr = m_sSystemDefaultString + " - " + rCurr.GetBankSymbol(); m_xCurrencyLB->insert(0, aDefaultCurr, &aDefaultID, nullptr, nullptr); assert(m_xCurrencyLB->find_id(aDefaultID) != -1); m_xCurrencyLB->set_active_text(aDefaultCurr); // obtain corresponding locale data LocaleDataWrapper aLocaleWrapper(( LanguageTag(eLang) )); // update the decimal separator key of the related CheckBox OUString sTempLabel(m_sDecimalSeparatorLabel); sTempLabel = sTempLabel.replaceFirst("%1", aLocaleWrapper.getNumDecimalSep() ); m_xDecimalSeparatorCB->set_label(sTempLabel); // update the date acceptance patterns OUString aDatePatternsString = lcl_getDatePatternsConfigString( aLocaleWrapper); m_bDatePatternsValid = true; m_xDatePatternsED->set_text( aDatePatternsString); m_xDatePatternsED->set_message_type(weld::EntryMessageType::Normal); } IMPL_LINK( OfaLanguagesTabPage, DatePatternsHdl, weld::Entry&, rEd, void ) { OUString aPatterns(rEd.get_text()); bool bModified = false; const bool bValid = validateDatePatterns( bModified, aPatterns); if (bModified) { // gtk3 keeps the cursor position on equal length set_text() but at // least the 'gen' backend does not and resets to 0. const int nCursorPos = rEd.get_position(); rEd.set_text(aPatterns); rEd.set_position(nCursorPos); } if (bValid) rEd.set_message_type(weld::EntryMessageType::Normal); else rEd.set_message_type(weld::EntryMessageType::Error); m_bDatePatternsValid = bValid; } bool OfaLanguagesTabPage::validateDatePatterns( bool& rbModified, OUString& rPatterns ) { bool bValid = true; if (!rPatterns.isEmpty()) { OUStringBuffer aBuf( rPatterns); sal_Int32 nChar = 0; for (sal_Int32 nIndex=0; nIndex >= 0 && bValid; ++nChar) { const OUString aPat( rPatterns.getToken( 0, ';', nIndex)); if (aPat.isEmpty() && nIndex < 0) { // Indicating failure when about to append a pattern is too // confusing. Empty patterns are ignored anyway when sequencing // to SvtSysLocale. continue; // for } else if (aPat.getLength() < 2) bValid = false; else { bool bY, bM, bD; bY = bM = bD = false; bool bSep = true; if (aPat.getLength() == 3) { // Disallow a pattern that would match a numeric input with // decimal separator, like M.D const LanguageType eLang = m_xLocaleSettingLB->get_active_id(); const LocaleDataWrapper aLocaleWrapper(( LanguageTag(eLang))); if ( aPat[1] == aLocaleWrapper.getNumDecimalSep().toChar() || aPat[1] == aLocaleWrapper.getNumDecimalSepAlt().toChar()) { bValid = false; } } for (sal_Int32 i = 0; i < aPat.getLength() && bValid; /*nop*/) { const sal_Int32 j = i; const sal_uInt32 c = aPat.iterateCodePoints( &i); // Only one Y,M,D per pattern, separated by any character(s). switch (c) { case 'y': case 'Y': if (bY || !bSep) bValid = false; else if (c == 'y') { aBuf[nChar] = 'Y'; rbModified = true; } bY = true; bSep = false; break; case 'm': case 'M': if (bM || !bSep) bValid = false; else if (c == 'm') { aBuf[nChar] = 'M'; rbModified = true; } bM = true; bSep = false; break; case 'd': case 'D': if (bD || !bSep) bValid = false; else if (c == 'd') { aBuf[nChar] = 'D'; rbModified = true; } bD = true; bSep = false; break; default: // A pattern must not start with a separator (but // may end with). if (!(bY || bM || bD)) bValid = false; bSep = true; } nChar += i-j; } // At least one of Y,M,D bValid &= (bY || bM || bD); } } if (rbModified) rPatterns = aBuf.makeStringAndClear(); } return bValid; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */