/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "cuioptgenrl.hxx" #include "optpath.hxx" #include "optsave.hxx" #include "optlingu.hxx" #include #include #include "cuitabarea.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "optgdlg.hxx" #include #include #include #include using namespace ::com::sun::star::uno; using namespace ::com::sun::star::lang; using namespace ::com::sun::star::beans; using namespace ::com::sun::star::container; using namespace ::com::sun::star::util; using namespace ::utl; // class OfaMiscTabPage -------------------------------------------------- int OfaMiscTabPage::DeactivatePage( SfxItemSet* pSet_ ) { if ( pSet_ ) FillItemSet( *pSet_ ); return LEAVE_PAGE; } namespace { static OUString impl_SystemFileOpenServiceName() { const OUString &rDesktopEnvironment = Application::GetDesktopEnvironment(); if ( rDesktopEnvironment.equalsIgnoreAsciiCase("kde4") ) { #if ENABLE_KDE4 return OUString("com.sun.star.ui.dialogs.KDE4FilePicker" ); #else return OUString(); #endif } else if ( rDesktopEnvironment.equalsIgnoreAsciiCase("kde") ) { #if ENABLE_KDE return OUString("com.sun.star.ui.dialogs.KDEFilePicker"); #else return OUString(); #endif } else if ( rDesktopEnvironment.equalsIgnoreAsciiCase("tde") ) { #if ENABLE_TDE return OUString("com.sun.star.ui.dialogs.TDEFilePicker"); #else return OUString(); #endif } #if defined WNT return OUString("com.sun.star.ui.dialogs.SystemFilePicker"); #elif defined MACOSX return OUString("com.sun.star.ui.dialogs.AquaFilePicker"); #else return OUString(); #endif } static bool lcl_HasSystemFilePicker() { if( Application::hasNativeFileSelection() ) return true; // Otherwise fall-back on querying services bool bRet = false; Reference< XMultiServiceFactory > xFactory = comphelper::getProcessServiceFactory(); Reference< XContentEnumerationAccess > xEnumAccess( xFactory, UNO_QUERY ); Reference< XSet > xSet( xFactory, UNO_QUERY ); if ( ! xEnumAccess.is() || ! xSet.is() ) return bRet; try { OUString aFileService = impl_SystemFileOpenServiceName(); Reference< XEnumeration > xEnum = xEnumAccess->createContentEnumeration( aFileService ); if ( xEnum.is() && xEnum->hasMoreElements() ) bRet = true; } catch (const IllegalArgumentException&) { } catch (const ElementExistException&) { } return bRet; } } OfaMiscTabPage::OfaMiscTabPage(Window* pParent, const SfxItemSet& rSet) : SfxTabPage(pParent, "OptGeneralPage", "cui/ui/optgeneralpage.ui", rSet) { get(m_pToolTipsCB, "tooltips"); get(m_pExtHelpCB, "exthelp"); if (!lcl_HasSystemFilePicker()) get("filedlgframe")->Hide(); #if ! ENABLE_GTK get("printdlgframe")->Hide(); #else if (!SvtMiscOptions().IsExperimentalMode()) { get("printdlgframe")->Hide(); } #endif get(m_pFileDlgCB, "filedlg"); get(m_pPrintDlgCB, "printdlg"); get(m_pDocStatusCB, "docstatus"); get(m_pSaveAlwaysCB, "savealways"); get(m_pYearFrame, "yearframe"); get(m_pYearValueField, "year"); get(m_pToYearFT, "toyear"); if (m_pFileDlgCB->IsVisible() && SvtMiscOptions().IsUseSystemFileDialogReadOnly()) { m_pFileDlgROImage->Show(); m_pFileDlgCB->Disable(); } m_aStrDateInfo = m_pToYearFT->GetText(); m_pYearValueField->SetModifyHdl( LINK( this, OfaMiscTabPage, TwoFigureHdl ) ); Link aLink = LINK( this, OfaMiscTabPage, TwoFigureConfigHdl ); m_pYearValueField->SetDownHdl( aLink ); m_pYearValueField->SetUpHdl( aLink ); m_pYearValueField->SetLoseFocusHdl( aLink ); m_pYearValueField->SetFirstHdl( aLink ); TwoFigureConfigHdl(m_pYearValueField); SetExchangeSupport(); aLink = LINK( this, OfaMiscTabPage, HelpCheckHdl_Impl ); m_pToolTipsCB->SetClickHdl( aLink ); } OfaMiscTabPage::~OfaMiscTabPage() { } SfxTabPage* OfaMiscTabPage::Create( Window* pParent, const SfxItemSet& rAttrSet ) { return new OfaMiscTabPage( pParent, rAttrSet ); } bool OfaMiscTabPage::FillItemSet( SfxItemSet& rSet ) { sal_Bool bModified = sal_False; SvtHelpOptions aHelpOptions; sal_Bool bChecked = m_pToolTipsCB->IsChecked(); if ( bChecked != m_pToolTipsCB->GetSavedValue() ) aHelpOptions.SetHelpTips( bChecked ); bChecked = ( m_pExtHelpCB->IsChecked() && m_pToolTipsCB->IsChecked() ); if ( bChecked != m_pExtHelpCB->GetSavedValue() ) aHelpOptions.SetExtendedHelp( bChecked ); if ( TriState(m_pFileDlgCB->IsChecked()) != m_pFileDlgCB->GetSavedValue() ) { SvtMiscOptions aMiscOpt; aMiscOpt.SetUseSystemFileDialog( !m_pFileDlgCB->IsChecked() ); bModified = sal_True; } if ( TriState(m_pPrintDlgCB->IsChecked()) != m_pPrintDlgCB->GetSavedValue() ) { SvtMiscOptions aMiscOpt; aMiscOpt.SetUseSystemPrintDialog( !m_pPrintDlgCB->IsChecked() ); bModified = sal_True; } if ( TriState(m_pDocStatusCB->IsChecked()) != m_pDocStatusCB->GetSavedValue() ) { SvtPrintWarningOptions aPrintOptions; aPrintOptions.SetModifyDocumentOnPrintingAllowed( m_pDocStatusCB->IsChecked() ); bModified = sal_True; } if ( TriState(m_pSaveAlwaysCB->IsChecked()) != m_pSaveAlwaysCB->GetSavedValue() ) { SvtMiscOptions aMiscOpt; aMiscOpt.SetSaveAlwaysAllowed( m_pSaveAlwaysCB->IsChecked() ); bModified = sal_True; } const SfxUInt16Item* pUInt16Item = PTR_CAST( SfxUInt16Item, GetOldItem( rSet, SID_ATTR_YEAR2000 ) ); sal_uInt16 nNum = (sal_uInt16)m_pYearValueField->GetText().toInt32(); if ( pUInt16Item && pUInt16Item->GetValue() != nNum ) { bModified = sal_True; rSet.Put( SfxUInt16Item( SID_ATTR_YEAR2000, nNum ) ); } return bModified; } void OfaMiscTabPage::Reset( const SfxItemSet& rSet ) { SvtHelpOptions aHelpOptions; m_pToolTipsCB->Check( aHelpOptions.IsHelpTips() ); m_pExtHelpCB->Check( aHelpOptions.IsHelpTips() && aHelpOptions.IsExtendedHelp() ); m_pToolTipsCB->SaveValue(); m_pExtHelpCB->SaveValue(); SvtMiscOptions aMiscOpt; m_pFileDlgCB->Check( !aMiscOpt.UseSystemFileDialog() ); m_pFileDlgCB->SaveValue(); m_pPrintDlgCB->Check( !aMiscOpt.UseSystemPrintDialog() ); m_pPrintDlgCB->SaveValue(); m_pSaveAlwaysCB->Check( aMiscOpt.IsSaveAlwaysAllowed() ); m_pSaveAlwaysCB->SaveValue(); SvtPrintWarningOptions aPrintOptions; m_pDocStatusCB->Check(aPrintOptions.IsModifyDocumentOnPrintingAllowed()); m_pDocStatusCB->SaveValue(); const SfxPoolItem* pItem = NULL; if ( SFX_ITEM_SET == rSet.GetItemState( SID_ATTR_YEAR2000, false, &pItem ) ) { m_pYearValueField->SetValue( ((SfxUInt16Item*)pItem)->GetValue() ); TwoFigureConfigHdl(m_pYearValueField); } else { m_pYearFrame->Enable(false); } } IMPL_LINK( OfaMiscTabPage, TwoFigureHdl, NumericField*, pEd ) { (void)pEd; OUString aOutput( m_aStrDateInfo ); OUString aStr( m_pYearValueField->GetText() ); OUString sSep( SvtSysLocale().GetLocaleData().getNumThousandSep() ); sal_Int32 nIndex = 0; while ((nIndex = aStr.indexOf( sSep, nIndex)) != -1) aStr = aStr.replaceAt( nIndex, sSep.getLength(), ""); sal_Int32 nNum = aStr.toInt32(); if ( aStr.getLength() != 4 || nNum < m_pYearValueField->GetMin() || nNum > m_pYearValueField->GetMax() ) aOutput += "????"; else { nNum += 99; aOutput += OUString::number( nNum ); } m_pToYearFT->SetText( aOutput ); return 0; } IMPL_LINK( OfaMiscTabPage, TwoFigureConfigHdl, NumericField*, pEd ) { sal_Int64 nNum = m_pYearValueField->GetValue(); OUString aOutput(OUString::number(nNum)); m_pYearValueField->SetText(aOutput); m_pYearValueField->SetSelection( Selection( 0, aOutput.getLength() ) ); TwoFigureHdl( pEd ); return 0; } IMPL_LINK_NOARG(OfaMiscTabPage, HelpCheckHdl_Impl) { m_pExtHelpCB->Enable( m_pToolTipsCB->IsChecked() ); return 0; } class CanvasSettings { public: CanvasSettings(); sal_Bool IsHardwareAccelerationEnabled() const; sal_Bool IsHardwareAccelerationAvailable() const; void EnabledHardwareAcceleration( sal_Bool _bEnabled ) const; private: typedef std::vector< std::pair > > ServiceVector; Reference mxForceFlagNameAccess; ServiceVector maAvailableImplementations; mutable sal_Bool mbHWAccelAvailable; mutable sal_Bool mbHWAccelChecked; }; CanvasSettings::CanvasSettings() : mxForceFlagNameAccess(), mbHWAccelAvailable(sal_False), mbHWAccelChecked(sal_False) { try { Reference xConfigProvider( com::sun::star::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); Any propValue( makeAny( NamedValue( OUString("nodepath"), makeAny( OUString("/org.openoffice.Office.Canvas") ) ) ) ); mxForceFlagNameAccess.set( xConfigProvider->createInstanceWithArguments( OUString("com.sun.star.configuration.ConfigurationUpdateAccess"), Sequence( &propValue, 1 ) ), UNO_QUERY_THROW ); propValue = makeAny( NamedValue( OUString("nodepath"), makeAny( OUString("/org.openoffice.Office.Canvas/CanvasServiceList") ) ) ); Reference xNameAccess( xConfigProvider->createInstanceWithArguments( OUString("com.sun.star.configuration.ConfigurationAccess"), Sequence( &propValue, 1 ) ), UNO_QUERY_THROW ); Reference xHierarchicalNameAccess( xNameAccess, UNO_QUERY_THROW); Sequence serviceNames = xNameAccess->getElementNames(); const OUString* pCurr = serviceNames.getConstArray(); const OUString* const pEnd = pCurr + serviceNames.getLength(); while( pCurr != pEnd ) { Reference xEntryNameAccess( xHierarchicalNameAccess->getByHierarchicalName(*pCurr), UNO_QUERY ); if( xEntryNameAccess.is() ) { Sequence preferredImplementations; if( (xEntryNameAccess->getByName("PreferredImplementations") >>= preferredImplementations) ) maAvailableImplementations.push_back( std::make_pair(*pCurr,preferredImplementations) ); } ++pCurr; } } catch (const Exception&) { } } sal_Bool CanvasSettings::IsHardwareAccelerationAvailable() const { if( !mbHWAccelChecked ) { mbHWAccelChecked = true; Reference< XMultiServiceFactory > xFactory = comphelper::getProcessServiceFactory(); // check whether any of the service lists has an // implementation that presents the "HardwareAcceleration" property ServiceVector::const_iterator aCurr=maAvailableImplementations.begin(); const ServiceVector::const_iterator aEnd=maAvailableImplementations.end(); while( aCurr != aEnd ) { const OUString* pCurrImpl = aCurr->second.getConstArray(); const OUString* const pEndImpl = pCurrImpl + aCurr->second.getLength(); while( pCurrImpl != pEndImpl ) { try { Reference xPropSet( xFactory->createInstance( pCurrImpl->trim() ), UNO_QUERY_THROW ); bool bHasAccel(false); if( (xPropSet->getPropertyValue("HardwareAcceleration") >>= bHasAccel) ) if( bHasAccel ) { mbHWAccelAvailable = true; return mbHWAccelAvailable; } } catch (const Exception&) { } ++pCurrImpl; } ++aCurr; } } return mbHWAccelAvailable; } sal_Bool CanvasSettings::IsHardwareAccelerationEnabled() const { bool bForceLastEntry(false); if( !mxForceFlagNameAccess.is() ) return true; if( !(mxForceFlagNameAccess->getByName("ForceSafeServiceImpl") >>= bForceLastEntry) ) return true; return !bForceLastEntry; } void CanvasSettings::EnabledHardwareAcceleration( sal_Bool _bEnabled ) const { Reference< XNameReplace > xNameReplace( mxForceFlagNameAccess, UNO_QUERY ); if( !xNameReplace.is() ) return; xNameReplace->replaceByName( OUString("ForceSafeServiceImpl"), makeAny(!_bEnabled) ); Reference< XChangesBatch > xChangesBatch( mxForceFlagNameAccess, UNO_QUERY ); if( !xChangesBatch.is() ) return; xChangesBatch->commitChanges(); } // class OfaViewTabPage -------------------------------------------------- OfaViewTabPage::OfaViewTabPage(Window* pParent, const SfxItemSet& rSet) : SfxTabPage(pParent, "OptViewPage", "cui/ui/optviewpage.ui", rSet) , nSizeLB_InitialSelection(0) , nStyleLB_InitialSelection(0) , pAppearanceCfg(new SvtTabAppearanceCfg) , pCanvasSettings(new CanvasSettings) , mpDrawinglayerOpt(new SvtOptionsDrawinglayer) { get(m_pWindowSizeMF, "windowsize"); get(m_pIconSizeLB, "iconsize"); get(m_pIconStyleLB, "iconstyle"); get(m_pSystemFont, "systemfont"); VclContainer *pRef = get("refgrid"); //fdo#65595, we need height-for-width support here, but for now we can //bodge it Size aPrefSize(m_pSystemFont->get_preferred_size()); Size aSize(pRef->get_preferred_size()); if (aPrefSize.Width() > aSize.Width()) { aSize = m_pSystemFont->CalcMinimumSize(aSize.Width()); m_pSystemFont->set_width_request(aSize.Width()); m_pSystemFont->set_height_request(aSize.Height()); } get(m_pFontAntiAliasing, "aafont"); get(m_pAAPointLimitLabel, "aafrom"); get(m_pAAPointLimit, "aanf"); get(m_pMenuIconsLB, "menuicons"); get(m_pFontShowCB, "showfontpreview"); get(m_pFontHistoryCB, "showfonthistory"); get(m_pUseHardwareAccell, "useaccel"); get(m_pUseAntiAliase, "useaa"); get(m_pMousePosLB, "mousepos"); get(m_pMouseMiddleLB, "mousemiddle"); // #i97672# get(m_pSelectionCB, "trans"); get(m_pSelectionMF, "transmf"); #if defined( UNX ) m_pFontAntiAliasing->SetToggleHdl( LINK( this, OfaViewTabPage, OnAntialiasingToggled ) ); #else // on this platform, we do not have the anti aliasing options m_pFontAntiAliasing->Hide(); m_pAAPointLimitLabel->Hide(); m_pAAPointLimit->Hide(); #endif // #i97672# m_pSelectionCB->SetToggleHdl( LINK( this, OfaViewTabPage, OnSelectionToggled ) ); if( ! Application::ValidateSystemFont() ) { m_pSystemFont->Check(false); m_pSystemFont->Enable(false); } // Set known icon themes OUString sAutoStr( m_pIconStyleLB->GetEntry( 0 ) ); m_pIconStyleLB->Clear(); StyleSettings aStyleSettings = Application::GetSettings().GetStyleSettings(); mInstalledIconThemes = aStyleSettings.GetInstalledIconThemes(); // Start with the automatically chosen icon theme OUString autoThemeId = aStyleSettings.GetAutomaticallyChosenIconTheme(); const vcl::IconThemeInfo& autoIconTheme = vcl::IconThemeInfo::FindIconThemeById(mInstalledIconThemes, autoThemeId); OUString entryForAuto = sAutoStr + OUString(" (") + autoIconTheme.GetDisplayName() + OUString(")"); m_pIconStyleLB->InsertEntry(entryForAuto); for (std::vector::const_iterator aI = mInstalledIconThemes.begin(); aI != mInstalledIconThemes.end(); ++aI) { m_pIconStyleLB->InsertEntry(aI->GetDisplayName()); } // separate auto and other icon themes m_pIconStyleLB->SetSeparatorPos( 0 ); m_pIconStyleLB->SelectEntryPos(0); } OfaViewTabPage::~OfaViewTabPage() { delete mpDrawinglayerOpt; delete pCanvasSettings; delete pAppearanceCfg; } #if defined( UNX ) IMPL_LINK( OfaViewTabPage, OnAntialiasingToggled, void*, NOTINTERESTEDIN ) { (void)NOTINTERESTEDIN; sal_Bool bAAEnabled = m_pFontAntiAliasing->IsChecked(); m_pAAPointLimitLabel->Enable( bAAEnabled ); m_pAAPointLimit->Enable( bAAEnabled ); return 0L; } #endif // #i97672# IMPL_LINK( OfaViewTabPage, OnSelectionToggled, void*, NOTINTERESTEDIN ) { (void)NOTINTERESTEDIN; const bool bSelectionEnabled(m_pSelectionCB->IsChecked()); m_pSelectionMF->Enable(bSelectionEnabled); return 0; } SfxTabPage* OfaViewTabPage::Create( Window* pParent, const SfxItemSet& rAttrSet ) { return new OfaViewTabPage(pParent, rAttrSet); } bool OfaViewTabPage::FillItemSet( SfxItemSet& ) { SvtFontOptions aFontOpt; SvtMenuOptions aMenuOpt; sal_Bool bModified = sal_False; sal_Bool bMenuOptModified = sal_False; bool bRepaintWindows(false); SvtMiscOptions aMiscOptions; sal_uInt16 nSizeLB_NewSelection = m_pIconSizeLB->GetSelectEntryPos(); if( nSizeLB_InitialSelection != nSizeLB_NewSelection ) { // from now on it's modified, even if via auto setting the same size was set as now selected in the LB sal_Int16 eSet = SFX_SYMBOLS_SIZE_AUTO; switch( nSizeLB_NewSelection ) { case 0: eSet = SFX_SYMBOLS_SIZE_AUTO; break; case 1: eSet = SFX_SYMBOLS_SIZE_SMALL; break; case 2: eSet = SFX_SYMBOLS_SIZE_LARGE; break; default: OSL_FAIL( "OfaViewTabPage::FillItemSet(): This state of m_pIconSizeLB should not be possible!" ); } aMiscOptions.SetSymbolsSize( eSet ); } sal_uInt16 nStyleLB_NewSelection = m_pIconStyleLB->GetSelectEntryPos(); if( nStyleLB_InitialSelection != nStyleLB_NewSelection ) { // 0 means choose style automatically if (nStyleLB_NewSelection == 0) { aMiscOptions.SetIconThemeAutomatically(); } else { sal_uInt16 pos = m_pIconStyleLB->GetSelectEntryPos(); const vcl::IconThemeInfo& iconThemeId = mInstalledIconThemes.at(pos-1); aMiscOptions.SetIconTheme(iconThemeId.GetThemeId()); } nStyleLB_InitialSelection = nStyleLB_NewSelection; } sal_Bool bAppearanceChanged = sal_False; // Screen Scaling sal_uInt16 nOldScale = pAppearanceCfg->GetScaleFactor(); sal_uInt16 nNewScale = (sal_uInt16)m_pWindowSizeMF->GetValue(); if ( nNewScale != nOldScale ) { pAppearanceCfg->SetScaleFactor(nNewScale); bAppearanceChanged = sal_True; } // Mouse Snap Mode short eOldSnap = pAppearanceCfg->GetSnapMode(); short eNewSnap = m_pMousePosLB->GetSelectEntryPos(); if(eNewSnap > 2) eNewSnap = 2; if ( eNewSnap != eOldSnap ) { pAppearanceCfg->SetSnapMode(eNewSnap ); bAppearanceChanged = sal_True; } // Middle Mouse Button short eOldMiddleMouse = pAppearanceCfg->GetMiddleMouseButton(); short eNewMiddleMouse = m_pMouseMiddleLB->GetSelectEntryPos(); if(eNewMiddleMouse > 2) eNewMiddleMouse = 2; if ( eNewMiddleMouse != eOldMiddleMouse ) { pAppearanceCfg->SetMiddleMouseButton( eNewMiddleMouse ); bAppearanceChanged = sal_True; } #if defined( UNX ) if ( TriState(m_pFontAntiAliasing->IsChecked()) != m_pFontAntiAliasing->GetSavedValue() ) { pAppearanceCfg->SetFontAntiAliasing( m_pFontAntiAliasing->IsChecked() ); bAppearanceChanged = sal_True; } if ( m_pAAPointLimit->GetValue() != m_pAAPointLimit->GetSavedValue().toInt32() ) { pAppearanceCfg->SetFontAntialiasingMinPixelHeight( m_pAAPointLimit->GetValue() ); bAppearanceChanged = sal_True; } #endif if ( TriState(m_pFontShowCB->IsChecked()) != m_pFontShowCB->GetSavedValue() ) { aFontOpt.EnableFontWYSIWYG( m_pFontShowCB->IsChecked() ); bModified = sal_True; } if(m_pMenuIconsLB->GetSelectEntryPos() != m_pMenuIconsLB->GetSavedValue()) { aMenuOpt.SetMenuIconsState(m_pMenuIconsLB->GetSelectEntryPos() == 0 ? TRISTATE_INDET : static_cast(m_pMenuIconsLB->GetSelectEntryPos() - 1)); bModified = sal_True; bMenuOptModified = sal_True; bAppearanceChanged = sal_True; } if ( TriState(m_pFontHistoryCB->IsChecked()) != m_pFontHistoryCB->GetSavedValue() ) { aFontOpt.EnableFontHistory( m_pFontHistoryCB->IsChecked() ); bModified = sal_True; } // #i95644# if disabled, do not use value, see in ::Reset() if(m_pUseHardwareAccell->IsEnabled()) { if(TriState(m_pUseHardwareAccell->IsChecked()) != m_pUseHardwareAccell->GetSavedValue()) { pCanvasSettings->EnabledHardwareAcceleration(m_pUseHardwareAccell->IsChecked()); bModified = sal_True; } } // #i95644# if disabled, do not use value, see in ::Reset() if(m_pUseAntiAliase->IsEnabled()) { if(m_pUseAntiAliase->IsChecked() != mpDrawinglayerOpt->IsAntiAliasing()) { mpDrawinglayerOpt->SetAntiAliasing(m_pUseAntiAliase->IsChecked()); bModified = sal_True; bRepaintWindows = true; } } // #i97672# if(m_pSelectionCB->IsEnabled()) { const bool bNewSelection(m_pSelectionCB->IsChecked()); const sal_uInt16 nNewTransparence((sal_uInt16)m_pSelectionMF->GetValue()); if(bNewSelection != (bool)mpDrawinglayerOpt->IsTransparentSelection()) { mpDrawinglayerOpt->SetTransparentSelection(m_pSelectionCB->IsChecked()); bModified = sal_True; bRepaintWindows = true; } // #i104150# even read the value when m_pSelectionMF is disabled; it may have been // modified by enabling-modify-disabling by the user if(nNewTransparence != mpDrawinglayerOpt->GetTransparentSelectionPercent()) { mpDrawinglayerOpt->SetTransparentSelectionPercent(nNewTransparence); bModified = sal_True; bRepaintWindows = true; } } SvtAccessibilityOptions aAccessibilityOptions; if( aAccessibilityOptions.GetIsSystemFont() != m_pSystemFont->IsChecked() && m_pSystemFont->IsEnabled() ) { aAccessibilityOptions.SetIsSystemFont( m_pSystemFont->IsChecked() ); bModified = sal_True; bMenuOptModified = sal_True; } if( bMenuOptModified ) { // Set changed settings to the application instance AllSettings aAllSettings = Application::GetSettings(); StyleSettings aStyleSettings = aAllSettings.GetStyleSettings(); if( m_pSystemFont->IsEnabled() ) aStyleSettings.SetUseSystemUIFonts( m_pSystemFont->IsChecked() ); aAllSettings.SetStyleSettings(aStyleSettings); Application::MergeSystemSettings( aAllSettings ); Application::SetSettings(aAllSettings); } if ( bAppearanceChanged ) { pAppearanceCfg->Commit(); pAppearanceCfg->SetApplicationDefaults ( GetpApp() ); } if(bRepaintWindows) { Window* pAppWindow = Application::GetFirstTopLevelWindow(); while(pAppWindow) { pAppWindow->Invalidate(); pAppWindow = Application::GetNextTopLevelWindow(pAppWindow); } } return bModified; } void OfaViewTabPage::Reset( const SfxItemSet& ) { SvtMiscOptions aMiscOptions; if( aMiscOptions.GetSymbolsSize() != SFX_SYMBOLS_SIZE_AUTO ) nSizeLB_InitialSelection = ( aMiscOptions.AreCurrentSymbolsLarge() )? 2 : 1; m_pIconSizeLB->SelectEntryPos( nSizeLB_InitialSelection ); m_pIconSizeLB->SaveValue(); if (aMiscOptions.IconThemeWasSetAutomatically()) { nStyleLB_InitialSelection = 0; } else { const OUString& selected = aMiscOptions.GetIconTheme(); const vcl::IconThemeInfo& selectedInfo = vcl::IconThemeInfo::FindIconThemeById(mInstalledIconThemes, selected); nStyleLB_InitialSelection = m_pIconStyleLB->GetEntryPos(selectedInfo.GetDisplayName()); } m_pIconStyleLB->SelectEntryPos( nStyleLB_InitialSelection ); m_pIconStyleLB->SaveValue(); if( m_pSystemFont->IsEnabled() ) { SvtAccessibilityOptions aAccessibilityOptions; m_pSystemFont->Check( aAccessibilityOptions.GetIsSystemFont() ); } // Screen Scaling m_pWindowSizeMF->SetValue ( pAppearanceCfg->GetScaleFactor() ); // Mouse Snap m_pMousePosLB->SelectEntryPos(pAppearanceCfg->GetSnapMode()); m_pMousePosLB->SaveValue(); // Mouse Snap m_pMouseMiddleLB->SelectEntryPos(pAppearanceCfg->GetMiddleMouseButton()); m_pMouseMiddleLB->SaveValue(); #if defined( UNX ) m_pFontAntiAliasing->Check( pAppearanceCfg->IsFontAntiAliasing() ); m_pAAPointLimit->SetValue( pAppearanceCfg->GetFontAntialiasingMinPixelHeight() ); #endif // WorkingSet SvtFontOptions aFontOpt; m_pFontShowCB->Check( aFontOpt.IsFontWYSIWYGEnabled() ); SvtMenuOptions aMenuOpt; m_pMenuIconsLB->SelectEntryPos(aMenuOpt.GetMenuIconsState() == 2 ? 0 : aMenuOpt.GetMenuIconsState() + 1); m_pMenuIconsLB->SaveValue(); m_pFontHistoryCB->Check( aFontOpt.IsFontHistoryEnabled() ); { // #i95644# HW accel (unified to disable mechanism) if(pCanvasSettings->IsHardwareAccelerationAvailable()) { m_pUseHardwareAccell->Check(pCanvasSettings->IsHardwareAccelerationEnabled()); } else { m_pUseHardwareAccell->Check(false); m_pUseHardwareAccell->Disable(); } m_pUseHardwareAccell->SaveValue(); } { // #i95644# AntiAliasing if(mpDrawinglayerOpt->IsAAPossibleOnThisSystem()) { m_pUseAntiAliase->Check(mpDrawinglayerOpt->IsAntiAliasing()); } else { m_pUseAntiAliase->Check(false); m_pUseAntiAliase->Disable(); } m_pUseAntiAliase->SaveValue(); } { // #i97672# Selection // check if transparent selection is possible on this system const bool bTransparentSelectionPossible( !GetSettings().GetStyleSettings().GetHighContrastMode() && supportsOperation(OutDevSupport_TransparentRect)); // enter values if(bTransparentSelectionPossible) { m_pSelectionCB->Check(mpDrawinglayerOpt->IsTransparentSelection()); } else { m_pSelectionCB->Enable(false); } m_pSelectionMF->SetValue(mpDrawinglayerOpt->GetTransparentSelectionPercent()); m_pSelectionMF->Enable(mpDrawinglayerOpt->IsTransparentSelection() && bTransparentSelectionPossible); } #if defined( UNX ) m_pFontAntiAliasing->SaveValue(); m_pAAPointLimit->SaveValue(); #endif m_pFontShowCB->SaveValue(); m_pFontHistoryCB->SaveValue(); #if defined( UNX ) LINK( this, OfaViewTabPage, OnAntialiasingToggled ).Call( NULL ); #endif } struct LanguageConfig_Impl { SvtLanguageOptions aLanguageOptions; SvtSysLocaleOptions aSysLocaleOptions; SvtLinguConfig aLinguConfig; }; static sal_Bool bLanguageCurrentDoc_Impl = sal_False; // some things we'll need... static const OUString sAccessSrvc("com.sun.star.configuration.ConfigurationAccess"); static const OUString sAccessUpdSrvc("com.sun.star.configuration.ConfigurationUpdateAccess"); static const OUString sInstalledLocalesPath("org.openoffice.Setup/Office/InstalledLocales"); static OUString sUserLocalePath("org.openoffice.Office.Linguistic/General"); //static const OUString sUserLocalePath("org.openoffice.Office/Linguistic"); static const OUString sUserLocaleKey("UILocale"); static Sequence< OUString > seqInstalledLanguages; static OUString lcl_getDatePatternsConfigString( const LocaleDataWrapper& rLocaleWrapper ) { Sequence< OUString > aDateAcceptancePatterns = rLocaleWrapper.getDateAcceptancePatterns(); sal_Int32 nPatterns = aDateAcceptancePatterns.getLength(); OUStringBuffer aBuf( nPatterns * 6 ); // 6 := length of Y-M-D; SAL_WARN_IF( !nPatterns, "cui.options", "No date acceptance pattern"); if (nPatterns) { const OUString* pPatterns = aDateAcceptancePatterns.getConstArray(); aBuf.append( pPatterns[0]); for (sal_Int32 i=1; i < nPatterns; ++i) aBuf.append(';').append( pPatterns[i]); } return aBuf.makeStringAndClear(); } OfaLanguagesTabPage::OfaLanguagesTabPage( Window* pParent, const SfxItemSet& rSet ) : SfxTabPage( pParent,"OptLanguagesPage","cui/ui/optlanguagespage.ui", rSet ), pLangConfig(new LanguageConfig_Impl) { get(m_pUserInterfaceLB, "userinterface"); m_pUserInterfaceLB->SetStyle(m_pUserInterfaceLB->GetStyle() | WB_SORT); get(m_pLocaleSettingLB, "localesetting"); m_pLocaleSettingLB->SetStyle(m_pLocaleSettingLB->GetStyle() | WB_SORT); get(m_pLocaleSettingFT, "localesettingFT"); get(m_pDecimalSeparatorCB, "decimalseparator"); get(m_pCurrencyFT, "defaultcurrency"); get(m_pCurrencyLB, "currencylb"); m_pCurrencyLB->SetStyle(m_pCurrencyLB->GetStyle() | WB_SORT); get(m_pDatePatternsFT,"dataaccpatterns"); get(m_pDatePatternsED, "datepatterns"); get(m_pWesternLanguageLB, "westernlanguage"); m_pWesternLanguageLB->SetStyle(m_pWesternLanguageLB->GetStyle() | WB_SORT); get(m_pWesternLanguageFT, "western"); get(m_pAsianLanguageLB, "asianlanguage"); m_pAsianLanguageLB->SetStyle(m_pAsianLanguageLB->GetStyle() | WB_SORT); get(m_pComplexLanguageLB, "complexlanguage"); m_pComplexLanguageLB->SetStyle(m_pComplexLanguageLB->GetStyle() | WB_SORT); get(m_pCurrentDocCB, "currentdoc"); get(m_pAsianSupportCB, "asiansupport"); get(m_pCTLSupportCB, "ctlsupport"); get(m_pIgnoreLanguageChangeCB, "ignorelanguagechange"); // initialize user interface language selection SvtLanguageTable* pLanguageTable = new SvtLanguageTable; m_sSystemDefaultString = pLanguageTable->GetString( LANGUAGE_SYSTEM ); OUString aUILang = m_sSystemDefaultString + " - " + pLanguageTable->GetString( Application::GetSettings().GetUILanguageTag().getLanguageType(), true ); m_pUserInterfaceLB->InsertEntry(aUILang); m_pUserInterfaceLB->SetEntryData(0, 0); m_pUserInterfaceLB->SelectEntryPos(0); try { Reference< XMultiServiceFactory > theConfigProvider( com::sun::star::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); Sequence< Any > theArgs(1); Reference< XNameAccess > theNameAccess; // find out which locales are currently installed and add them to the listbox theArgs[0] = makeAny(NamedValue(OUString("nodepath"), makeAny(sInstalledLocalesPath))); theNameAccess = Reference< XNameAccess > ( theConfigProvider->createInstanceWithArguments(sAccessSrvc, theArgs ), UNO_QUERY_THROW ); seqInstalledLanguages = theNameAccess->getElementNames(); LanguageType aLang = LANGUAGE_DONTKNOW; for (sal_IntPtr i=0; iInsertLanguage(aLang); OUString aLangStr( pLanguageTable->GetString( aLang, true ) ); sal_uInt16 p = m_pUserInterfaceLB->InsertEntry(aLangStr); m_pUserInterfaceLB->SetEntryData(p, (void*)(i+1)); } } // find out whether the user has a specific locale specified Sequence< Any > theArgs2(1); theArgs2[0] = makeAny(NamedValue(OUString("nodepath"), makeAny(sUserLocalePath))); theNameAccess = Reference< XNameAccess > ( theConfigProvider->createInstanceWithArguments(sAccessSrvc, theArgs2 ), UNO_QUERY_THROW ); if (theNameAccess->hasByName(sUserLocaleKey)) theNameAccess->getByName(sUserLocaleKey) >>= m_sUserLocaleValue; // select the user specified locale in the listbox if (!m_sUserLocaleValue.isEmpty()) { sal_Int32 d = 0; for (sal_uInt16 i=0; i < m_pUserInterfaceLB->GetEntryCount(); i++) { d = (sal_Int32)(sal_IntPtr)m_pUserInterfaceLB->GetEntryData(i); if ( d > 0 && seqInstalledLanguages.getLength() > d-1 && seqInstalledLanguages[d-1].equals(m_sUserLocaleValue)) m_pUserInterfaceLB->SelectEntryPos(i); } } } catch (const Exception &e) { // we'll just leave the box in it's default setting and won't // even give it event handler... SAL_WARN("cui.options", "ignoring Exception \"" << e.Message << "\""); } m_pWesternLanguageLB->SetLanguageList( LANG_LIST_WESTERN | LANG_LIST_ONLY_KNOWN, true, false, true ); m_pWesternLanguageLB->InsertDefaultLanguage( ::com::sun::star::i18n::ScriptType::LATIN ); m_pAsianLanguageLB->SetLanguageList( LANG_LIST_CJK | LANG_LIST_ONLY_KNOWN, true, false, true ); m_pAsianLanguageLB->InsertDefaultLanguage( ::com::sun::star::i18n::ScriptType::ASIAN ); m_pComplexLanguageLB->SetLanguageList( LANG_LIST_CTL | LANG_LIST_ONLY_KNOWN, true, false, true ); m_pComplexLanguageLB->InsertDefaultLanguage( ::com::sun::star::i18n::ScriptType::COMPLEX ); m_pLocaleSettingLB->SetLanguageList( LANG_LIST_ALL | LANG_LIST_ONLY_KNOWN, false, false, false); m_pLocaleSettingLB->InsertSystemLanguage( ); const NfCurrencyTable& rCurrTab = SvNumberFormatter::GetTheCurrencyTable(); const NfCurrencyEntry& rCurr = SvNumberFormatter::GetCurrencyEntry( LANGUAGE_SYSTEM ); // insert SYSTEM entry OUString aDefaultCurr = m_sSystemDefaultString + " - " + rCurr.GetBankSymbol(); m_pCurrencyLB->InsertEntry( aDefaultCurr ); // all currencies OUString aTwoSpace( " " ); sal_uInt16 nCurrCount = rCurrTab.size(); // first entry is SYSTEM, skip it for ( sal_uInt16 j=1; j < nCurrCount; ++j ) { const NfCurrencyEntry* pCurr = &rCurrTab[j]; OUString aStr_ = pCurr->GetBankSymbol() + aTwoSpace + pCurr->GetSymbol(); aStr_ = ApplyLreOrRleEmbedding( aStr_ ) + aTwoSpace + ApplyLreOrRleEmbedding( pLanguageTable->GetString( pCurr->GetLanguage() ) ); sal_uInt16 nPos = m_pCurrencyLB->InsertEntry( aStr_ ); m_pCurrencyLB->SetEntryData( nPos, (void*) pCurr ); } delete pLanguageTable; m_pLocaleSettingLB->SetSelectHdl( LINK( this, OfaLanguagesTabPage, LocaleSettingHdl ) ); m_pDatePatternsED->SetModifyHdl( LINK( this, OfaLanguagesTabPage, DatePatternsHdl ) ); Link aLink( LINK( this, OfaLanguagesTabPage, SupportHdl ) ); m_pAsianSupportCB->SetClickHdl( aLink ); m_pCTLSupportCB->SetClickHdl( aLink ); m_bOldAsian = pLangConfig->aLanguageOptions.IsAnyEnabled(); m_pAsianSupportCB->Check(m_bOldAsian); m_pAsianSupportCB->SaveValue(); sal_Bool bReadonly = pLangConfig->aLanguageOptions.IsReadOnly(SvtLanguageOptions::E_ALLCJK); m_pAsianSupportCB->Enable(!bReadonly); SupportHdl( m_pAsianSupportCB ); m_bOldCtl = pLangConfig->aLanguageOptions.IsCTLFontEnabled(); m_pCTLSupportCB->Check(m_bOldCtl); m_pCTLSupportCB->SaveValue(); bReadonly = pLangConfig->aLanguageOptions.IsReadOnly(SvtLanguageOptions::E_CTLFONT); m_pCTLSupportCB->Enable(!bReadonly); SupportHdl( m_pCTLSupportCB ); m_pIgnoreLanguageChangeCB->Check( pLangConfig->aSysLocaleOptions.IsIgnoreLanguageChange() ); } OfaLanguagesTabPage::~OfaLanguagesTabPage() { delete pLangConfig; } SfxTabPage* OfaLanguagesTabPage::Create( Window* pParent, const SfxItemSet& rAttrSet ) { return new OfaLanguagesTabPage(pParent, rAttrSet); } static void lcl_UpdateAndDelete(SfxVoidItem* pInvalidItems[], SfxBoolItem* pBoolItems[], sal_uInt16 nCount) { SfxViewFrame* pCurrentFrm = SfxViewFrame::Current(); SfxViewFrame* pViewFrm = SfxViewFrame::GetFirst(); while(pViewFrm) { SfxBindings& rBind = pViewFrm->GetBindings(); for(sal_Int16 i = 0; i < nCount; i++) { if(pCurrentFrm == pViewFrm) rBind.InvalidateAll(false); rBind.SetState( *pInvalidItems[i] ); rBind.SetState( *pBoolItems[i] ); } pViewFrm = SfxViewFrame::GetNext(*pViewFrm); } for(sal_Int16 i = 0; i < nCount; i++) { delete pInvalidItems[i]; delete pBoolItems[i] ; } } bool OfaLanguagesTabPage::FillItemSet( SfxItemSet& rSet ) { // lock configuration broadcasters so that we can coordinate the notifications pLangConfig->aSysLocaleOptions.BlockBroadcasts( true ); pLangConfig->aLanguageOptions.BlockBroadcasts( true ); pLangConfig->aLinguConfig.BlockBroadcasts( true ); /* * Sequence checking only matters when CTL support is enabled. * * So we only need to check for sequence checking if * a) previously it was unchecked and is now checked or * b) it was already checked but the CTL language has changed */ if ( m_pCTLSupportCB->IsChecked() && (m_pCTLSupportCB->GetSavedValue() != TRISTATE_TRUE || m_pComplexLanguageLB->GetSavedValue() != m_pComplexLanguageLB->GetSelectEntryPos()) ) { //sequence checking has to be switched on depending on the selected CTL language LanguageType eCTLLang = m_pComplexLanguageLB->GetSelectLanguage(); sal_Bool bOn = MsLangId::needsSequenceChecking( eCTLLang); pLangConfig->aLanguageOptions.SetCTLSequenceCheckingRestricted(bOn); pLangConfig->aLanguageOptions.SetCTLSequenceChecking(bOn); pLangConfig->aLanguageOptions.SetCTLSequenceCheckingTypeAndReplace(bOn); } try { // handle settings for UI Language // a change of setting needs to bring up a warning message OUString aLangString; sal_Int32 d = (sal_Int32)(sal_IntPtr)m_pUserInterfaceLB->GetEntryData(m_pUserInterfaceLB->GetSelectEntryPos()); if( d > 0 && seqInstalledLanguages.getLength() > d-1) aLangString = seqInstalledLanguages[d-1]; /* if( m_pUserInterfaceLB->GetSelectEntryPos() > 0) aLangString = ConvertLanguageToIsoString(m_pUserInterfaceLB->GetSelectLanguage()); */ Reference< XMultiServiceFactory > theConfigProvider( com::sun::star::configuration::theDefaultProvider::get( comphelper::getProcessComponentContext())); Sequence< Any > theArgs(1); theArgs[0] = makeAny(NamedValue(OUString("nodepath"), makeAny(sUserLocalePath))); Reference< XPropertySet >xProp( theConfigProvider->createInstanceWithArguments(sAccessUpdSrvc, theArgs ), UNO_QUERY_THROW ); if ( !m_sUserLocaleValue.equals(aLangString)) { // OSL_FAIL("UserInterface language was changed, restart."); // write new value xProp->setPropertyValue(sUserLocaleKey, makeAny(aLangString)); Reference< XChangesBatch >(xProp, UNO_QUERY_THROW)->commitChanges(); // display info InfoBox aBox(this, CUI_RES(RID_SVX_MSGBOX_LANGUAGE_RESTART)); aBox.Execute(); // tell quickstarter to stop being a veto listener Reference< XComponentContext > xContext( comphelper::getProcessComponentContext()); css::office::Quickstart::createAndSetVeto(xContext, false, false, false/*DisableVeto*/); } } catch (const Exception& e) { // we'll just leave the box in it's default setting and won't // even give it event handler... SAL_WARN("cui.options", "ignoring Exception \"" << e.Message << "\""); } OUString sLang = pLangConfig->aSysLocaleOptions.GetLocaleConfigString(); LanguageType eOldLocale = (!sLang.isEmpty() ? LanguageTag::convertToLanguageTypeWithFallback( sLang ) : LANGUAGE_SYSTEM); LanguageType eNewLocale = m_pLocaleSettingLB->GetSelectLanguage(); // If the "Default ..." entry was selected that means SYSTEM, the actual // eNewLocale value is temporary for the dialog only, do not resolve to // what system currently is. if (eNewLocale == LANGUAGE_USER_SYSTEM_CONFIG) eNewLocale = LANGUAGE_SYSTEM; if ( eOldLocale != eNewLocale ) { // an empty string denotes SYSTEM locale OUString sNewLang; if ( eNewLocale != LANGUAGE_SYSTEM ) sNewLang = LanguageTag::convertToBcp47( eNewLocale); // locale nowadays get to AppSettings via notification // this will happen after releasing the lock on the ConfigurationBroadcaster at // the end of this method pLangConfig->aSysLocaleOptions.SetLocaleConfigString( sNewLang ); rSet.Put( SfxBoolItem( SID_OPT_LOCALE_CHANGED, true ) ); sal_uInt16 nNewType = SvtLanguageOptions::GetScriptTypeOfLanguage( eNewLocale ); bool bNewCJK = ( nNewType & SCRIPTTYPE_ASIAN ) != 0; SvtCompatibilityOptions aCompatOpts; aCompatOpts.SetDefault( COMPATIBILITY_PROPERTYNAME_EXPANDWORDSPACE, !bNewCJK ); } if(m_pDecimalSeparatorCB->GetSavedValue() != TriState(m_pDecimalSeparatorCB->IsChecked())) pLangConfig->aSysLocaleOptions.SetDecimalSeparatorAsLocale(m_pDecimalSeparatorCB->IsChecked()); if(m_pIgnoreLanguageChangeCB->GetSavedValue() != TriState(m_pIgnoreLanguageChangeCB->IsChecked())) pLangConfig->aSysLocaleOptions.SetIgnoreLanguageChange(m_pIgnoreLanguageChangeCB->IsChecked()); // Configured currency, for example, USD-en-US or EUR-de-DE, or empty for locale default. OUString sOldCurr = pLangConfig->aSysLocaleOptions.GetCurrencyConfigString(); sal_uInt16 nCurrPos = m_pCurrencyLB->GetSelectEntryPos(); const NfCurrencyEntry* pCurr = (const NfCurrencyEntry*) m_pCurrencyLB->GetEntryData( nCurrPos ); OUString sNewCurr; if ( pCurr ) sNewCurr = SvtSysLocaleOptions::CreateCurrencyConfigString( pCurr->GetBankSymbol(), pCurr->GetLanguage() ); if ( sOldCurr != sNewCurr ) pLangConfig->aSysLocaleOptions.SetCurrencyConfigString( sNewCurr ); // Configured date acceptance patterns, for example Y-M-D;M-D or empty for // locale default. if (m_pDatePatternsED->GetText() != m_pDatePatternsED->GetSavedValue()) pLangConfig->aSysLocaleOptions.SetDatePatternsConfigString( m_pDatePatternsED->GetText()); SfxObjectShell* pCurrentDocShell = SfxObjectShell::Current(); Reference< css::linguistic2::XLinguProperties > xLinguProp = LinguMgr::GetLinguPropertySet(); sal_Bool bCurrentDocCBChecked = m_pCurrentDocCB->IsChecked(); if(m_pCurrentDocCB->IsEnabled()) bLanguageCurrentDoc_Impl = bCurrentDocCBChecked; sal_Bool bCurrentDocCBChanged = bCurrentDocCBChecked != m_pCurrentDocCB->GetSavedValue(); sal_Bool bValChanged = m_pWesternLanguageLB->GetSavedValue() != m_pWesternLanguageLB->GetSelectEntryPos(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_pWesternLanguageLB->GetSelectLanguage(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; OUString aPropName( "DefaultLocale" ); pLangConfig->aLinguConfig.SetProperty( aPropName, aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale( aLocale ); } if(pCurrentDocShell) { rSet.Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, ::com::sun::star::i18n::ScriptType::LATIN), SID_ATTR_LANGUAGE)); } } bValChanged = m_pAsianLanguageLB->GetSavedValue() != m_pAsianLanguageLB->GetSelectEntryPos(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_pAsianLanguageLB->GetSelectLanguage(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; OUString aPropName( "DefaultLocale_CJK" ); pLangConfig->aLinguConfig.SetProperty( aPropName, aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale_CJK( aLocale ); } if(pCurrentDocShell) { rSet.Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, ::com::sun::star::i18n::ScriptType::ASIAN), SID_ATTR_CHAR_CJK_LANGUAGE)); } } bValChanged = m_pComplexLanguageLB->GetSavedValue() != m_pComplexLanguageLB->GetSelectEntryPos(); if( (bCurrentDocCBChanged && !bCurrentDocCBChecked) || bValChanged) { LanguageType eSelectLang = m_pComplexLanguageLB->GetSelectLanguage(); if(!bCurrentDocCBChecked) { Any aValue; Locale aLocale = LanguageTag::convertToLocale( eSelectLang, false); aValue <<= aLocale; OUString aPropName( "DefaultLocale_CTL" ); pLangConfig->aLinguConfig.SetProperty( aPropName, aValue ); if (xLinguProp.is()) xLinguProp->setDefaultLocale_CTL( aLocale ); } if(pCurrentDocShell) { rSet.Put(SvxLanguageItem(MsLangId::resolveSystemLanguageByScriptType(eSelectLang, ::com::sun::star::i18n::ScriptType::COMPLEX), SID_ATTR_CHAR_CTL_LANGUAGE)); } } if(m_pAsianSupportCB->GetSavedValue() != TriState(m_pAsianSupportCB->IsChecked()) ) { sal_Bool bChecked = m_pAsianSupportCB->IsChecked(); pLangConfig->aLanguageOptions.SetAll(bChecked); //iterate over all bindings to invalidate vertical text direction const sal_uInt16 STATE_COUNT = 2; SfxBoolItem* pBoolItems[STATE_COUNT]; pBoolItems[0] = new SfxBoolItem(SID_VERTICALTEXT_STATE, false); pBoolItems[1] = new SfxBoolItem(SID_TEXT_FITTOSIZE_VERTICAL, false); SfxVoidItem* pInvalidItems[STATE_COUNT]; pInvalidItems[0] = new SfxVoidItem(SID_VERTICALTEXT_STATE); pInvalidItems[1] = new SfxVoidItem(SID_TEXT_FITTOSIZE_VERTICAL); lcl_UpdateAndDelete(pInvalidItems, pBoolItems, STATE_COUNT); } if ( m_pCTLSupportCB->GetSavedValue() != TriState(m_pCTLSupportCB->IsChecked()) ) { SvtSearchOptions aOpt; aOpt.SetIgnoreDiacritics_CTL (true); pLangConfig->aLanguageOptions.SetCTLFontEnabled( m_pCTLSupportCB->IsChecked() ); const sal_uInt16 STATE_COUNT = 1; SfxBoolItem* pBoolItems[STATE_COUNT]; pBoolItems[0] = new SfxBoolItem(SID_CTLFONT_STATE, false); SfxVoidItem* pInvalidItems[STATE_COUNT]; pInvalidItems[0] = new SfxVoidItem(SID_CTLFONT_STATE); lcl_UpdateAndDelete(pInvalidItems, pBoolItems, STATE_COUNT); } if ( pLangConfig->aSysLocaleOptions.IsModified() ) pLangConfig->aSysLocaleOptions.Commit(); // first release the lock on the ConfigurationBroadcaster for Locale changes // it seems that our code relies on the fact that before other changes like e.g. currency // are broadcasted locale changes have been done pLangConfig->aSysLocaleOptions.BlockBroadcasts( false ); pLangConfig->aLanguageOptions.BlockBroadcasts( false ); pLangConfig->aLinguConfig.BlockBroadcasts( false ); return false; } void OfaLanguagesTabPage::Reset( const SfxItemSet& rSet ) { OUString sLang = pLangConfig->aSysLocaleOptions.GetLocaleConfigString(); if ( !sLang.isEmpty() ) m_pLocaleSettingLB->SelectLanguage(LanguageTag::convertToLanguageTypeWithFallback(sLang)); else m_pLocaleSettingLB->SelectLanguage( LANGUAGE_USER_SYSTEM_CONFIG ); sal_Bool bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::E_LOCALE); m_pLocaleSettingLB->Enable(!bReadonly); m_pLocaleSettingFT->Enable(!bReadonly); m_pDecimalSeparatorCB->Check( pLangConfig->aSysLocaleOptions.IsDecimalSeparatorAsLocale()); m_pDecimalSeparatorCB->SaveValue(); m_pIgnoreLanguageChangeCB->Check( pLangConfig->aSysLocaleOptions.IsIgnoreLanguageChange()); m_pIgnoreLanguageChangeCB->SaveValue(); // let LocaleSettingHdl enable/disable checkboxes for CJK/CTL support // #i15812# must be done *before* the configured currency is set // and update the decimal separator used for the given locale LocaleSettingHdl(m_pLocaleSettingLB); // configured currency, for example, USD-en-US or EUR-de-DE, or empty for locale default OUString aAbbrev; LanguageType eLang; const NfCurrencyEntry* pCurr = NULL; sLang = pLangConfig->aSysLocaleOptions.GetCurrencyConfigString(); if ( !sLang.isEmpty() ) { SvtSysLocaleOptions::GetCurrencyAbbrevAndLanguage( aAbbrev, eLang, sLang ); pCurr = SvNumberFormatter::GetCurrencyEntry( aAbbrev, eLang ); } // if pCurr==NULL the SYSTEM entry is selected sal_uInt16 nPos = m_pCurrencyLB->GetEntryPos( (void*) pCurr ); m_pCurrencyLB->SelectEntryPos( nPos ); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::E_CURRENCY); m_pCurrencyLB->Enable(!bReadonly); m_pCurrencyFT->Enable(!bReadonly); // date acceptance patterns OUString aDatePatternsString = pLangConfig->aSysLocaleOptions.GetDatePatternsConfigString(); if (aDatePatternsString.isEmpty()) { const LocaleDataWrapper& rLocaleWrapper( Application::GetSettings().GetLocaleDataWrapper() ); aDatePatternsString = lcl_getDatePatternsConfigString( rLocaleWrapper); } m_pDatePatternsED->SetText( aDatePatternsString); bReadonly = pLangConfig->aSysLocaleOptions.IsReadOnly(SvtSysLocaleOptions::E_DATEPATTERNS); m_pDatePatternsED->Enable(!bReadonly); m_pDatePatternsFT->Enable(!bReadonly); m_pDatePatternsED->SaveValue(); //western/CJK/CLK language LanguageType eCurLang = LANGUAGE_NONE; LanguageType eCurLangCJK = LANGUAGE_NONE; LanguageType eCurLangCTL = LANGUAGE_NONE; SfxObjectShell* pCurrentDocShell = SfxObjectShell::Current(); //collect the configuration values first m_pCurrentDocCB->Enable(false); Any aWestLang; Any aCJKLang; Any aCTLLang; try { aWestLang = pLangConfig->aLinguConfig.GetProperty("DefaultLocale"); Locale aLocale; aWestLang >>= aLocale; eCurLang = LanguageTag::convertToLanguageType( aLocale, false); aCJKLang = pLangConfig->aLinguConfig.GetProperty("DefaultLocale_CJK"); aLocale = Locale(); aCJKLang >>= aLocale; eCurLangCJK = LanguageTag::convertToLanguageType( aLocale, false); aCTLLang = pLangConfig->aLinguConfig.GetProperty("DefaultLocale_CTL"); aLocale = Locale(); aCTLLang >>= aLocale; eCurLangCTL = LanguageTag::convertToLanguageType( aLocale, false); } catch (const Exception&) { } //overwrite them by the values provided by the DocShell if(pCurrentDocShell) { m_pCurrentDocCB->Enable(true); m_pCurrentDocCB->Check(bLanguageCurrentDoc_Impl); const SfxPoolItem* pLang; if( SFX_ITEM_SET == rSet.GetItemState(SID_ATTR_LANGUAGE, false, &pLang)) { LanguageType eTempCurLang = ((const SvxLanguageItem*)pLang)->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLang, ::com::sun::star::i18n::ScriptType::LATIN) != eTempCurLang) eCurLang = eTempCurLang; } if( SFX_ITEM_SET == rSet.GetItemState(SID_ATTR_CHAR_CJK_LANGUAGE, false, &pLang)) { LanguageType eTempCurLang = ((const SvxLanguageItem*)pLang)->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLangCJK, ::com::sun::star::i18n::ScriptType::ASIAN) != eTempCurLang) eCurLangCJK = eTempCurLang; } if( SFX_ITEM_SET == rSet.GetItemState(SID_ATTR_CHAR_CTL_LANGUAGE, false, &pLang)) { LanguageType eTempCurLang = ((const SvxLanguageItem*)pLang)->GetValue(); if (MsLangId::resolveSystemLanguageByScriptType(eCurLangCTL, ::com::sun::star::i18n::ScriptType::COMPLEX) != eTempCurLang) eCurLangCTL = eTempCurLang; } } if(LANGUAGE_NONE == eCurLang || LANGUAGE_DONTKNOW == eCurLang) m_pWesternLanguageLB->SelectLanguage(LANGUAGE_NONE); else m_pWesternLanguageLB->SelectLanguage(eCurLang); if(LANGUAGE_NONE == eCurLangCJK || LANGUAGE_DONTKNOW == eCurLangCJK) m_pAsianLanguageLB->SelectLanguage(LANGUAGE_NONE); else m_pAsianLanguageLB->SelectLanguage(eCurLangCJK); if(LANGUAGE_NONE == eCurLangCTL || LANGUAGE_DONTKNOW == eCurLangCTL) m_pComplexLanguageLB->SelectLanguage(LANGUAGE_NONE); else m_pComplexLanguageLB->SelectLanguage(eCurLangCTL); m_pWesternLanguageLB->SaveValue(); m_pAsianLanguageLB->SaveValue(); m_pComplexLanguageLB->SaveValue(); m_pIgnoreLanguageChangeCB->SaveValue(); m_pCurrentDocCB->SaveValue(); sal_Bool bEnable = !pLangConfig->aLinguConfig.IsReadOnly( "DefaultLocale" ); m_pWesternLanguageFT->Enable( bEnable ); m_pWesternLanguageLB->Enable( bEnable ); // #i15812# controls for CJK/CTL already enabled/disabled from LocaleSettingHdl #if 0 bEnable = ( !pLangConfig->aLinguConfig.IsReadOnly( "DefaultLocale_CJK" ) && m_pAsianSupportCB->IsChecked() ); m_pAsianLanguageLB->Enable( bEnable ); bEnable = ( !pLangConfig->aLinguConfig.IsReadOnly( "DefaultLocale_CTL" ) && m_pCTLSupportCB->IsChecked() ); m_pComplexLanguageLB->Enable( bEnable ); #endif // check the box "For the current document only" // set the focus to the Western Language box const SfxPoolItem* pLang = 0; if ( SFX_ITEM_SET == rSet.GetItemState(SID_SET_DOCUMENT_LANGUAGE, false, &pLang ) && ((const SfxBoolItem*)pLang)->GetValue() ) { m_pWesternLanguageLB->GrabFocus(); m_pCurrentDocCB->Enable(true); m_pCurrentDocCB->Check(true); } } IMPL_LINK( OfaLanguagesTabPage, SupportHdl, CheckBox*, pBox ) { DBG_ASSERT( pBox, "OfaLanguagesTabPage::SupportHdl(): pBox invalid" ); sal_Bool bCheck = pBox->IsChecked(); if ( m_pAsianSupportCB == pBox ) { sal_Bool bReadonly = pLangConfig->aLinguConfig.IsReadOnly("DefaultLocale_CJK"); bCheck = ( bCheck && !bReadonly ); m_pAsianLanguageLB->Enable( bCheck ); if( pBox->IsEnabled() ) m_bOldAsian = bCheck; } else if ( m_pCTLSupportCB == pBox ) { sal_Bool bReadonly = pLangConfig->aLinguConfig.IsReadOnly("DefaultLocale_CTL"); bCheck = ( bCheck && !bReadonly ); m_pComplexLanguageLB->Enable( bCheck ); if( pBox->IsEnabled() ) m_bOldCtl = bCheck; } else SAL_WARN( "cui.options", "OfaLanguagesTabPage::SupportHdl(): wrong pBox" ); return 0; } namespace { void lcl_checkLanguageCheckBox(CheckBox* _rCB,sal_Bool _bNewValue,sal_Bool _bOldValue) { if ( _bNewValue ) _rCB->Check(true); else _rCB->Check( _bOldValue ); // #i15082# do not call SaveValue() in running dialog... // _rCB.SaveValue(); _rCB->Enable( !_bNewValue ); } } IMPL_LINK( OfaLanguagesTabPage, LocaleSettingHdl, SvxLanguageBox*, pBox ) { LanguageType eLang = pBox->GetSelectLanguage(); sal_uInt16 nType = SvtLanguageOptions::GetScriptTypeOfLanguage(eLang); // first check if CTL must be enabled // #103299# - if CTL font setting is not readonly if(!pLangConfig->aLanguageOptions.IsReadOnly(SvtLanguageOptions::E_CTLFONT)) { bool bIsCTLFixed = (nType & SCRIPTTYPE_COMPLEX) != 0; lcl_checkLanguageCheckBox(m_pCTLSupportCB, bIsCTLFixed, m_bOldCtl); SupportHdl( m_pCTLSupportCB ); } // second check if CJK must be enabled // #103299# - if CJK support is not readonly if(!pLangConfig->aLanguageOptions.IsReadOnly(SvtLanguageOptions::E_ALLCJK)) { bool bIsCJKFixed = (nType & SCRIPTTYPE_ASIAN) != 0; lcl_checkLanguageCheckBox(m_pAsianSupportCB, bIsCJKFixed, m_bOldAsian); SupportHdl( m_pAsianSupportCB ); } const NfCurrencyEntry* pCurr = &SvNumberFormatter::GetCurrencyEntry( ((eLang == LANGUAGE_USER_SYSTEM_CONFIG) ? MsLangId::getSystemLanguage() : eLang)); sal_uInt16 nPos = m_pCurrencyLB->GetEntryPos( (void*) NULL ); if (pCurr) { // Update the "Default ..." currency. m_pCurrencyLB->RemoveEntry( nPos ); OUString aDefaultCurr = m_sSystemDefaultString + " - " + pCurr->GetBankSymbol(); nPos = m_pCurrencyLB->InsertEntry( aDefaultCurr ); } m_pCurrencyLB->SelectEntryPos( nPos ); // obtain corresponding locale data LanguageTag aLanguageTag( eLang); LocaleDataWrapper aLocaleWrapper( aLanguageTag ); // update the decimal separator key of the related CheckBox OUString sTempLabel(m_pDecimalSeparatorCB->GetText()); sTempLabel = sTempLabel.replaceFirst("%1", aLocaleWrapper.getNumDecimalSep() ); m_pDecimalSeparatorCB->SetText(sTempLabel); // update the date acceptance patterns OUString aDatePatternsString = lcl_getDatePatternsConfigString( aLocaleWrapper); m_pDatePatternsED->SetText( aDatePatternsString); return 0; } IMPL_LINK( OfaLanguagesTabPage, DatePatternsHdl, Edit*, pEd ) { OUString aPatterns( pEd->GetText()); bool bValid = true; if (!aPatterns.isEmpty()) { for (sal_Int32 nIndex=0; nIndex >= 0 && bValid; /*nop*/) { OUString aPat( aPatterns.getToken( 0, ';', nIndex)); if (aPat.isEmpty() && nIndex < 0) { // Indicating failure when about to append a pattern is too // confusing. Empty patterns are ignored anyway when sequencing // to SvtSysLocale. continue; // for } else if (aPat.getLength() < 2) bValid = false; else { bool bY, bM, bD; bY = bM = bD = false; bool bSep = true; for (sal_Int32 i = 0; i < aPat.getLength() && bValid; /*nop*/) { sal_uInt32 c = aPat.iterateCodePoints( &i); // Only one Y,M,D per pattern, separated by any character(s). switch (c) { case 'Y': if (bY || !bSep) bValid = false; bY = true; bSep = false; break; case 'M': if (bM || !bSep) bValid = false; bM = true; bSep = false; break; case 'D': if (bD || !bSep) bValid = false; bD = true; bSep = false; break; default: bSep = true; } } // At least one of Y,M,D bValid &= (bY || bM || bD); } } } if (bValid) { pEd->SetControlForeground(); pEd->SetControlBackground(); } else { // color to use as background for an invalid pattern #define INVALID_PATTERN_BACKGROUND_COLOR ::Color(0xff6563) #if 0 // color to use as foreground for an invalid pattern #define INVALID_PATTERN_FOREGROUND_COLOR Color(COL_WHITE) //! Gives white on white!?! pEd->SetControlBackground( INVALID_PATTERN_BACKGROUND_COLOR); pEd->SetControlForeground( INVALID_PATTERN_FOREGROUND_COLOR); #else pEd->SetControlForeground( INVALID_PATTERN_BACKGROUND_COLOR); #endif } return 0; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */