DMAKE(1) DMAKE(1)
NAME
dmake - maintain program groups, or interdependent files
SYNOPSIS
dmake [-P#] [-{f|C|K} file] [-{w|W} target ...]
[macro[[!][*][+][:]]=value ...] [-ABcdeEghiknpqrsStTuVxX]
[-v[cdfimrtw]] [-m[trae]] [target ...]
DESCRIPTION
dmake is a re-implementation of the UNIX Make utility with significant
enhancements. dmake executes commands found in an external file called
a makefile to update one or more target names. Each target may depend
on zero or more prerequisite targets. If any of the target's prerequi-
sites is newer than the target or if the target itself does not exist,
then dmake will attempt to make the target.
If no -f command line option is present then dmake searches for an
existing makefile from the list of prerequisites specified for the spe-
cial target .MAKEFILES (see the STARTUP section for more details). If
"-" is the name of the file specified to the -f flag then dmake uses
standard input as the source of the makefile text.
Any macro definitions (arguments with embedded "=" signs) that appear
on the command line are processed first and supercede definitions for
macros of the same name found within the makefile. In general it is
impossible for definitions found inside the makefile to redefine a
macro defined on the command line, see the MACROS section for excep-
tions.
If no target names are specified on the command line, then dmake uses
the first non-special target found in the makefile as the default tar-
get. See the SPECIAL TARGETS section for the list of special targets
and their function. Makefiles written for most previous versions of
Make will be handled correctly by dmake. Known differences between
dmake and other versions of make are discussed in the COMPATIBILITY
section found at the end of this document. dmake returns 0 if no
errors were detected and a non-zero result if an error occurred.
OPTIONS
-A Enable AUGMAKE special inference rule transformations (see the
"PERCENT(%) RULES" and "AUGMAKE META RULES" sections), these are
set to off by default.
-B Enable the use of spaces instead of <tabs> to begin recipe
lines. This flag equivalent to the .NOTABS special macro and is
further described below.
-c Use non-standard comment stripping. If you specify -c then
dmake will treat any # character as a start of comment character
wherever it may appear unless it is escaped by a \.
-C [+]file
This option writes to file a copy of standard output and stan-
dard error from any child processes and from the dmake process
Dmake Version 4.12 2008-02-26 1
DMAKE(1) DMAKE(1)
itself. If you specify a + prior to the file name then the text
is appended to the previous contents of file. This option is
active in the MSDOS implementation only and is ignored by non-
MSDOS versions of dmake.
-d Disable the use of the directory cache. Normally dmake caches
directories as it checks file timestamps. Giving this flag is
equivalent to the .DIRCACHE attribute or macro being set to no.
-E Read the environment and define all strings of the form
'ENV-VAR=evalue' defined within as macros whose name is ENV-VAR,
and whose value is 'evalue'. The environment is processed prior
to processing the user specified makefile thereby allowing defi-
nitions in the makefile to override definitions in the environ-
ment.
-e Same as -E, except that the environment is processed after the
user specified makefile has been processed (thus definitions in
the environment override definitions in the makefile). The -e
and -E options are mutually exclusive. If both are given the
latter takes effect.
-f file
Use file as the source for the makefile text. Only one -f
option is allowed.
-g Globally disable group recipe parsing, equivalent to the
.IGNOREGROUP attribute or macro being set to yes at the start of
the makefile.
-h Print the command summary for dmake.
-i Tells dmake to ignore errors, and continue making other targets.
This is equivalent to the .IGNORE attribute or macro.
-K file
Turns on .KEEP_STATE state tracking and tells dmake to use file
as the state file.
-k Causes dmake to ignore errors caused by command execution and to
make all targets not depending on targets that could not be
made. Ordinarily dmake stops after a command returns a non-zero
status, specifying -k causes dmake to ignore the error and con-
tinue to make as much as possible.
-m[trae]
Measure timing information. Print the time when targets and/or
recipes are started and finished to stdout. The following format
is used:
{s|e} {target|recipe} time maketarget
s or e stands for started or ended, target or recipe denotes if
this line refers to the whole target or a recipe. time is
Dmake Version 4.12 2008-02-26 2
DMAKE(1) DMAKE(1)
displayed in Unix time format, i.e. the number of seconds since
an epoch. (Since 1970-01-01T00:00:00Z). maketarget obviously
represents the target the timing information is given for. The
optional flags [trae] can be used to change the information that
is displayed. If no optional flags are given only the t flag is
assumed to be selected, ie. -mt. The optional flags stand for:
t Display the start and end time of each target.
r Display the start and end time of each recipe.
a Display the target as an absolute path, i.e. prepend the
current working directory.
e Also display the start and end time of the $(shell com-
mand) function (aka. shell escape) macros.
-n Causes dmake to print out what it would have executed, but does
not actually execute the commands. A special check is made for
the string "$(MAKE)" inside a recipe line, if it is found, the
line is expanded and invoked, thereby enabling recursive makes
to give a full description of all that they will do. This check
is disabled inside group recipes.
-p Print out a version of the digested makefile in human readable
form. (useful for debugging, but cannot be re-read by dmake)
-P# On systems that support multi-processing cause dmake to use #
concurrent child processes to make targets. See the "MULTI PRO-
CESSING" section for more information.
-q Check and see if the target is up to date. Exits with code 0 if
up to date, 1 otherwise.
-r Tells dmake not to read the initial startup makefile, see
STARTUP section for more details.
-s Tells dmake to do all its work silently and not echo the com-
mands it is executing to stdout (also suppresses warnings).
This is equivalent to the .SILENT attribute or macro.
-S Force sequential execution of recipes on architectures which
support concurrent makes. For backward compatibility with old
makefiles that have nasty side-effect prerequisite dependencies.
(Implies -P1)
-t Causes dmake to touch the targets and bring them up to date
without executing any commands. Note that targets will not be
created if they do not already exist.
-T Tells dmake to not perform transitive closure on the inference
graph.
-u Force an unconditional update. (ie. do everything that would be
done if everything that a target depended on was out of date)
Dmake Version 4.12 2008-02-26 3
DMAKE(1) DMAKE(1)
-v[cdfimrtw]
Verbose flag, when making targets print to stdout what we are
going to make and what we think its time stamp is. The optional
flags [cdfimrtw] can be used to restrict the information that is
displayed. In the absence of any optional flags all are assumed
to be given (ie. -v is equivalent to -vcdfimrtw). The meanings
of the optional flags are:
c Notify of directory cache operations only.
d Notify of change directory operations only.
f Notify of file I/O operations only.
i Notify of inference algorithm operation only.
m Notify of target update operations only.
r Force output of recipe lines, warnings and executed com-
mands. This switch is usefull when debugging makefiles
that disable the output using the @ or @@ property for
recipe lines or the .SILENT target/attribute. It also
overrides the -s flag.
t Keep any temporary files created; normally they are auto-
matically deleted.
w Notify of non-essential warnings (these are historical).
-V Print the version of dmake, and values of builtin macros.
-W target
Run dmake pretending that target is out of date.
-w target
What if? Show what would be made if target were out of date.
-x Upon processing the user makefile export all non-internally
defined macros to the user's environment. This option together
with the -e option allows SYSV AUGMAKE recursive makes to func-
tion as expected.
-X Inhibit the execution of #! lines found at the beginning of a
makefile. The use of this flag prevents non-termination of
recursive make invocations.
INDEX
Here is a list of the sections that follow and a short description of
each. Perhaps you won't have to read the entire man page to find what
you need.
STARTUP Describes dmake initialization.
SYNTAX Describes the syntax of makefile expressions.
Dmake Version 4.12 2008-02-26 4
DMAKE(1) DMAKE(1)
ATTRIBUTES Describes the notion of attributes and how they are
used when making targets.
MACROS Defining and expanding macros.
RULES AND TARGETS How to define targets and their prerequisites.
RECIPES How to tell dmake how to make a target.
BUILTIN COMMANDS Internal dmake commands.
TEXT DIVERSIONS How to use text diversions in recipes and macro
expansions.
VIRTUAL TARGETS Targets that only enforce dependencies, but which
can not create a target file.
SPECIAL TARGETS Some targets are special.
SPECIAL MACROS Macros used by dmake to alter the processing of the
makefile, and those defined by dmake for the user.
CONTROL MACROS Itemized list of special control macros.
RUNTIME MACROS Discussion of special run-time macros such as $@ and
$<.
FUNCTION MACROS Description of functional macros.
CONDITIONAL MACROS Target specific conditional macros.
DYNAMIC PREREQUISITES
Processing of prerequisites which contain macro
expansions in their name.
BINDING TARGETS The rules that dmake uses to bind a target to an
existing file in the file system.
PERCENT(%) RULES Specification of recipes to be used by the inference
algorithm.
MAKING INFERENCES The rules that dmake uses when inferring how to make
a target which has no explicit recipe. This and the
previous section are really a single section in the
text.
AUGMAKE META RULES A subclass of the PERCENT(%) RULES.
MAKING TARGETS How dmake makes targets other than libraries.
MAKING LIBRARIES How dmake makes libraries.
KEEP STATE A discussion of how .KEEP_STATE works.
MULTI PROCESSING Discussion of dmake's parallel make facilities for
architectures that support them.
Dmake Version 4.12 2008-02-26 5
DMAKE(1) DMAKE(1)
CONDITIONALS Conditional expressions which control the processing
of the makefile.
EXAMPLES Some hopefully useful examples.
COMPATIBILITY How dmake compares with previous versions of make.
LIMITS Limitations of dmake.
PORTABILITY Comments on writing portable makefiles.
FILES Files used by dmake.
SEE ALSO Other related programs, and man pages.
AUTHOR The guy responsible for this thing.
BUGS Hope not.
STARTUP
When dmake begins execution it first processes the command line and
then processes an initial startup-makefile. This is followed by an
attempt to locate and process a user supplied makefile. The startup
file defines the default values of all required control macros and the
set of default rules for making targets and inferences. When searching
for the startup makefile, dmake searches the following locations, in
the order specified, until a startup file is located:
1. The location given as the value of the macro MAKESTARTUP
defined on the command line.
2. The location given as the value of the environment vari-
able MAKESTARTUP defined in the current environment.
3. The location given as the value of the macro MAKESTARTUP
defined internally within dmake. In this version, the
internal definition of MAKESTARTUP is "$(DMAKE-
ROOT)/startup.mk", so you can set the environment vari-
able DMAKEROOT to the location of your startup directory.
If DMAKEROOT is not changed, for native Windows dmake
versions its value defaults to "$(ABSMAKECMD:d)startup"
(see definition of ABSMAKECMD for details). For unix
like versions build with the autotools build system it
defaults to the value of "${prefix}/share/startup" at
build time. The actual value, usually something like
/usr/local/share/startup can be checked with the -V com-
mand line switch.
The above search is disabled by specifying the -r option on the command
line. An error is issued if a startup makefile cannot be found and the
-r option was not specified. A user may substitute a custom startup
file by defining the MAKESTARTUP environment variable or by redefining
the MAKESTARTUP macro on the command line. To determine where dmake
looks for the default startup file, check your environment or issue the
Dmake Version 4.12 2008-02-26 6
DMAKE(1) DMAKE(1)
command "dmake -V".
A similar search is performed to locate a default user makefile when no
-f command line option is specified. By default, the prerequisite list
of the special target .MAKEFILES specifies the names of possible make-
files and the search order that dmake should use to determine if one
exists. A typical definition for this target is:
.MAKEFILES : makefile.mk Makefile makefile
dmake will first look for makefile.mk and then the others. If a pre-
requisite cannot be found dmake will try to make it before going on to
the next prerequisite. For example, makefile.mk can be checked out of
an RCS file if the proper rules for doing so are defined in the startup
file.
If the first line of the user makefile is of the form:
#!command command_args
then dmake will expand and run the command prior to reading any addi-
tional input. If the return code of the command is zero then dmake
will continue on to process the remainder of the user makefile, if the
return code is non-zero then dmake will exit.
dmake builds the internal dependency graph as it parses a user speci-
fied makefile. The graph is rooted at the special target .ROOT. .ROOT
is the top level target that dmake builds when it starts to build tar-
gets. All user specified targets (those from the command line or taken
as defaults from the makefile) are made prerequisites of the special
target .TARGETS. dmake by default creates the relationship that .ROOT
depends on .TARGETS and as a result everything is made. This approach
allows the user to customize, within their makefile, the order and
which, target, is built first. For example the default makefiles come
with settings for .ROOT that specify:
.ROOT .PHONY .NOSTATE .SEQUENTIAL : .INIT .TARGETS .DONE
with .INIT and .DONE defined as:
.INIT .DONE .PHONY:;
which nicely emulates the behaviour of Sun's make extensions. The
building of .ROOT's prerequisites is always forced to be sequential.
However, this definition is trivially changed by supplying the defini-
tion:
.ROOT : .TARGETS
which skips the preamble and postamble phases of building .TARGETS.
Please note that even though .INIT and .DONE are special exceptions,
see section SPECIAL TARGETS, the use of self defined targets starting
with `.' should be avoided as they would be handled as .<suffix> meta
targets. The target names _INIT and _DONE for example would work
equally well without the .<suffix> drawback.
Dmake Version 4.12 2008-02-26 7
DMAKE(1) DMAKE(1)
SYNTAX
This section is a summary of the syntax of makefile statements. The
description is given in a style similar to BNF, where { } enclose items
that may appear zero or more times, and [ ] enclose items that are
optional. Alternative productions for a left hand side are indicated
by '->', and newlines are significant. All symbols in bold type are
text or names representing text supplied by the user.
Makefile -> { Statement }
Statement -> Macro-Definition
-> Conditional-Macro-Definition
-> Conditional
-> Rule-Definition
-> Attribute-Definition
Macro-Definition -> MACRO = LINE
-> MACRO [!]*= LINE
-> MACRO [!]:= LINE
-> MACRO [!]*:= LINE
-> MACRO [!]+= LINE
-> MACRO [!]+:= LINE
Conditional-Macro-Definition -> TARGET ?= Macro-Definition
Conditional -> .IF expression
Makefile
[ .ELIF expression
Makefile ]
[ .ELSE
Makefile ]
.END
expression -> LINE
-> STRING
-> expression == expression
-> expression != expression
-> expression <= expression
-> expression >= expression
-> ( expression )
-> expression || expression
-> expression && expression
Rule-Definition -> target-definition
[ recipe ]
target-definition -> targets [attrs] op { PREREQUISITE } [; rcp-line]
Dmake Version 4.12 2008-02-26 8
DMAKE(1) DMAKE(1)
targets -> target { targets }
-> "target" { targets }
target -> special-target
-> TARGET
attrs -> attribute { attrs }
-> "attribute" { attrs }
op -> : { modifier }
modifier -> :
-> ^
-> !
-> -
-> |
recipe -> { TAB rcp-line }
-> [@[@]][%][-] [
{ LINE }
]
rcp-line -> [@[@]][%][-][+] LINE
Attribute-Definition -> attrs : targets
attribute -> .EPILOG
-> .ERRREMOVE
-> .EXECUTE
-> .GROUP
-> .IGNORE
-> .IGNOREGROUP
-> .LIBRARY
-> .MKSARGS
-> .NOINFER
-> .NOSTATE
-> .PHONY
-> .PRECIOUS
-> .PROLOG
-> .SETDIR=path
-> .SILENT
-> .SEQUENTIAL
-> .SWAP
-> .USESHELL
-> .SYMBOL
-> .UPDATEALL
-> .WINPATH
Dmake Version 4.12 2008-02-26 9
DMAKE(1) DMAKE(1)
special-target -> .ERROR
-> .EXIT
-> .EXPORT
-> .GROUPEPILOG
-> .GROUPPROLOG
-> .IMPORT
-> .INCLUDE
-> .INCLUDEDIRS
-> .MAKEFILES
-> .REMOVE
-> .ROOT
-> .SOURCE
-> .SOURCE.suffix
-> .SUFFIXES (deprecated)
-> .TARGETS
-> .INIT
-> .DONE
-> .suffix
-> .suffix1.suffix2
Where, TAB represents a <tab> character, STRING represents an arbitrary
sequence of characters, and LINE represents a possibly empty sequence
of characters terminated by a non-escaped (not immediately preceded by
a backslash '\') new-line character. MACRO, PREREQUISITE, and TARGET
each represent a string of characters not including space or tab which
respectively form the name of a macro, prerequisite or target. The
name may itself be a macro expansion expression. A LINE can be contin-
ued over several physical lines by terminating it with a single back-
slash character. Comments are initiated by the pound # character and
extend to the end of line. All comment text is discarded, a '#' may be
placed into the makefile text by escaping it with '\' (ie. \# trans-
lates to # when it is parsed). An exception to this occurs when a # is
seen inside a recipe line that begins with a <tab> or is inside a group
recipe. If you specify the -c command line switch then this behavior
is disabled and dmake will treat all # characters as start of comment
indicators unless they are escaped by \. A set of continued lines may
be commented out by placing a single # at the start of the first line.
A continued line cannot span more than one makefile.
white space is defined to be any combination of <space>, <tab>, and the
sequence \<nl> when \<nl> is used to terminate a LINE. Note the special
treatment of \<nl> in macro definion and recipe lines below. When pro-
cessing macro definition lines, any amount of white space is allowed on
either side of the macro operator and white space is stripped from both
before and after the macro value string. A \<nl> sequence in a macro
definition is deleted from the macro value before assigning this value.
During recipe expansion the sequence \<nl> is treated as white space
but is deleted from the final recipe string. You must escape the \<nl>
with another \ in order to get a \ at the end of a recipe or macro def-
inition line.
When processing target definition lines, the recipe for a target must,
in general, follow the first definition of the target (See the RULES
AND TARGETS section for an exception), and the recipe may not span
across multiple makefiles. Any targets and prerequisites found on a
Dmake Version 4.12 2008-02-26 10
DMAKE(1) DMAKE(1)
target definition line are taken to be white space separated tokens.
The rule operator (op in SYNTAX section) is also considered to be a
token but does not require white space to precede or follow it. Since
the rule operator begins with a `:', traditional versions of make do
not allow the `:' character to form a valid target name. dmake allows
`:' to be present in target/prerequisite names as long as the entire
target/prerequisite name is quoted. For example:
a:fred : test
would be parsed as TARGET = a, PREREQUISITES={fred, :, test}, which is
not what was intended. To fix this you must write:
"a:fred" : test
Which will be parsed as expected. Quoted target and prerequisite spec-
ifications may also contain white space thereby allowing the use of
complex function macro expressions.. See the EXAMPLES section for how
to apply " quoting to a list of targets.
ATTRIBUTES
dmake defines several target attributes. Attributes may be assigned to
a single target, a group of targets, or to all targets in the makefile.
Attributes are used to modify dmake actions during target update. The
recognized attributes are:
.EPILOG Insert shell epilog code when executing a group recipe
associated with any target having this attribute set.
.ERRREMOVE Always remove any target having this attribute if an error
is encountered while making them. Setting this attribute
overrides the .PRECIOUS attribute.
.EXECUTE If the -n flag was given then execute the recipe associated
with any target having this attribute set.
.FIRST Used in conjunction with .INCLUDE. Terminates the inclu-
sion with the first successfully included prerequisite.
.GROUP Force execution of a target's recipe as a group recipe.
.IGNORE Ignore an error when trying to make any target with this
attribute set.
.IGNOREGROUP
Disable the special meaning of '[' to initiate a group
recipe.
.LIBRARY Target is a library.
.MKSARGS If running in an MSDOS environment then use MKS extended
argument passing conventions to pass arguments to commands.
Non-MSDOS environments ignore this attribute.
.NOINFER Any target with this attribute set will not be subjected to
transitive closure if it is inferred as a prerequisite of a
Dmake Version 4.12 2008-02-26 11
DMAKE(1) DMAKE(1)
target whose recipe and prerequisites are being inferred.
(i.e. the inference algorithm will not use any prerequisite
with this attribute set, as a target) If specified as
'.NOINFER:' (ie. with no prerequisites or targets) then the
effect is equivalent to specifying -T on the command line.
.NOSTATE Any target with this attribute set will not have command
line flag information stored in the state file if
.KEEP_STATE has been enabled.
.PHONY Any target with this attribute set will have its recipe
executed each time the target is made even if a file match-
ing the target name can be located. Any targets that have
a .PHONY attributed target as a prerequisite will be made
each time the .PHONY attributed prerequisite is made.
.PRECIOUS Do not remove associated target under any circumstances.
Set by default for any targets whose corresponding files
exist in the file system prior to the execution of dmake.
.PROLOG Insert shell prolog code when executing a group recipe
associated with any target having this attribute set.
.SEQUENTIAL Force a sequential make of the associated target's prereq-
uisites. If set as a global attribute this implies setting
MAXPROCESS=1.
.SETDIR Change current working directory to specified directory
when making the associated target. You must specify the
directory at the time the attribute is specified. To do
this simply give .SETDIR=path as the attribute. path is
expanded and the result is used as the value of the direc-
tory to change to. If path contains $$@ then the name of
the target to be built is used in computing the path to
change directory to. If path is surrounded by single
quotes then path is not expanded, and is used literally as
the directory name. If the path contains any `:' charac-
ters then the entire attribute string must be quoted using
". If a target having this attribute set also has the
.IGNORE attribute set then if the change to the specified
directory fails it will be ignored, and no error message
will be issued.
.SILENT Do not echo the recipe lines when making any target with
this attribute set, and do not issue any warnings.
.SWAP Under MSDOS when making a target with this attribute set
swap the dmake executable to disk prior to executing the
recipe line. Also see the '%' recipe line flag defined in
the RECIPES section.
.SYMBOL Target is a library member and is an entry point into a
module in the library. This attribute is used only when
searching a library for a target. Targets of the form
lib((entry)) have this attribute set automatically.
.USESHELL Force each recipe line of a target to be executed using a
shell. Specifying this attribute is equivalent to
Dmake Version 4.12 2008-02-26 12
DMAKE(1) DMAKE(1)
specifying the '+' character at the start of each line of a
non-group recipe.
.UPDATEALL Indicates that all the targets listed in this rule are
updated by the execution of the accompanying recipe. A
common example is the production of the y.tab.c and y.tab.h
files by yacc when it is run on a grammar. Specifying
.UPDATEALL in such a rule prevents the running of yacc
twice, once for the y.tab.c file and once for the y.tab.h
file. .UPDATEALL targets that are specified in a single
rule are treated as a single target and all timestamps are
updated whenever any target in the set is made. As a side-
effect, dmake internally sorts such targets in ascending
alphabetical order and the value of $@ is always the first
target in the sorted set.
.WINPATH Switch between default (POSIX) and Windows style path rep-
resentation. (This attribute is specific for cygwin dmake
executables and non-cygwin environments ignore this
attribute.)
Under Cygwin it can be useful to generate Windows style
paths (with regular slashes) instead of the default cygwin
style (POSIX) paths for dmake's dynamic macros. The
affected macros are $@, $*, $>, $?, $<, $&, $^ and
$(MAKEDIR), $(PWD), $(TMD), $(TMPFILE) and the $(mktmp ...)
function macro. This feature can be used to create DOS
style path parameters for native W32 programs from dynamic
macros.
Note that the Windows style paths use regular slashes ('/')
instead of the usual Windows backslash ('\') as directory
separator to avoid quoting problems (after all it is still
a cygwin dmake!) and cygwin, as well as native Windows,
programs should have no problems using this (c:/foo/bar)
path representation.
Example: Assuming the current target to be /tmp/mytarget
the $@ macro without .WINPATH active expands to:
/tmp/mytarget
With .WINPATH set it expands to:
C:/cygwin/tmp/mytarget
All attributes are user setable and except for .UPDATEALL and .MKSARGS
may be used in one of two forms. The .MKSARGS attribute is restricted
to use as a global attribute, and the use of the .UPDATEALL attribute
is restricted to rules of the second form only.
ATTRIBUTE_LIST : targets
assigns the attributes specified by ATTRIBUTE_LIST to each target in
targets or
targets ATTRIBUTE_LIST : ...
Dmake Version 4.12 2008-02-26 13
DMAKE(1) DMAKE(1)
assigns the attributes specified by ATTRIBUTE_LIST to each target in
targets. In the first form if targets is empty (ie. a NULL list), then
the list of attributes will apply to all targets in the makefile (this
is equivalent to the common Make construct of ".IGNORE :" but has been
modified to the notion of an attribute instead of a special target).
Not all of the attributes have global meaning. In particular,
.LIBRARY, .NOSTATE, .PHONY, .SETDIR, .SYMBOL and .UPDATEALL have no
assigned global meaning.
Any attribute may be used with any target, even with the special tar-
gets. Some combinations are useless (e.g. .INCLUDE .PRECIOUS: ... ),
while others are useful (e.g. .INCLUDE .IGNORE : "file.mk" will not
complain if file.mk cannot be found using the include file search
rules, see the section on SPECIAL TARGETS for a description of
.INCLUDE). If a specified attribute will not be used with the special
target a warning is issued and the attribute is ignored.
MACROS
dmake supports six forms of macro assignment.
MACRO = LINE This is the most common and familiar form of macro
assignment. It assigns LINE literally as the value of
MACRO. Future expansions of MACRO recursively expand
its value.
MACRO *= LINE This form behaves exactly as the simple '=' form with
the exception that if MACRO already has a value then
the assignment is not performed.
MACRO := LINE This form differs from the simple '=' form in that it
expands LINE prior to assigning it as the value of
MACRO. Future expansions of MACRO do not recursively
expand its value.
MACRO *:= LINE This form behaves exactly as the ':=' form with the
exception that if MACRO already has a value then the
assignment and expansion are not performed.
MACRO += LINE This form of macro assignment allows macro values to
grow. It takes the literal value of LINE and appends
it to the previous value of MACRO separating the two by
a single space. Future expansions of MACRO recursively
expand its value.
MACRO +:= LINE This form is similar to the '+=' form except that the
value of LINE is expanded prior to being added to the
value of MACRO.
Macro expressions specified on the command line allow the macro value
to be redefined within the makefile only if the macro is defined using
the '+=' and '+:=' operators. Other operators will define a macro that
cannot be further modified.
Each of the preceeding macro assignment operators may be prefixed by !
to indicate that the assignment should be forced and that no warnings
should be issued. Thus, specifying ! has the effect of silently forc-
ing the specified macro assignment.
Dmake Version 4.12 2008-02-26 14
DMAKE(1) DMAKE(1)
When dmake defines a non-environment macro it strips leading and trail-
ing white space from the macro value. Macros imported from the envi-
ronment via either the .IMPORT special target (see the SPECIAL TARGETS
section), or the -e, or -E flags are an exception to this rule. Their
values are always taken literally and white space is never stripped.
In addition, named macros defined using the .IMPORT special target do
not have their values expanded when they are used within a makefile.
In contrast, environment macros that are imported due to the specifica-
tion of the -e or -E flags are subject to expansion when used.
To specify a macro expansion enclose the name in () or {} and precede
it with a dollar sign $. Thus $(TEST) represents an expansion of the
macro variable named TEST. If TEST is defined then $(TEST) is replaced
by its expanded value. If TEST is not defined then $(TEST) expands to
the NULL string (this is equivalent to defining a macro as 'TEST=' ).
A short form may be used for single character named macros. In this
case the parentheses are optional, and $(I) is equivalent to $I. Macro
expansion is recursive, hence, if the value string contains an expres-
sion representing a macro expansion, the expansion is performed. Cir-
cular macro expansions are detected and cause an error to be issued.
When defining a macro the given macro name is first expanded before
being used to define the macro. Thus it is possible to define macros
whose names depend on values of other macros. For example, suppose CWD
is defined as
CWD = $(PWD:b)
then the value of $(CWD) is the name of the current directory. This
can be used to define macros specific to this directory, for example:
_$(CWD).prt = list of files to print...
The actual name of the defined macro is a function of the current
directory. A construct such as this is useful when processing a hier-
archy of directories using .SETDIR attributed targets and a collection
of small distributed makefile stubs.
Macro variables may be defined within the makefile, on the command
line, or imported from the environment.
dmake supports several non-standard macro expansions: The first is of
the form:
$(macro_name:modifier_list:modifier_list:...)
where modifier_list may be a combination of:
b or B - file (not including suffix) portion of path names
d or D - directory portion of all path names
e or E - suffix portion of path names
f or F - file (including suffix) portion of path names
i or I - inferred names of targets
n or N - normalized path names
l or L - macro value in lower case
u or U - macro value in upper case
1 - return the first white space separated token from value
Dmake Version 4.12 2008-02-26 15
DMAKE(1) DMAKE(1)
or a single one of:
m or M - map escape codes found in macro to their ASCII value
s or S - simple pattern substitution
t or T - tokenization.
^ - prepend a prefix to each token
+ - append a suffix to each token
Thus if we have the example:
test = d1/d2/d3/a.out f.out d1/k.out
The following macro expansions produce the values on the right of '->'
after expansion.
$(test:d) -> d1/d2/d3/ d1/
$(test:b) -> a f k
$(test:f) -> a.out f.out k.out
${test:db} -> d1/d2/d3/a f d1/k
${test:s/out/in/:f} -> a.in f.in k.in
$(test:f:t"+") -> a.out+f.out+k.out
$(test:e) -> .out .out .out
$(test:u) -> D1/D2/D3/A.OUT F.OUT D1/K.OUT
$(test:1) -> d1/d2/d3/a.out
For this macro
test = d1/d2/../a.out "d1/file name.ext"
the following results are returned:
$(test:n) -> d1/a.out "d1/file name.ext"
If a token ends in a string composed from the value of the macro
DIRBRKSTR (ie. ends in a directory separator string, e.g. '/' in UNIX)
and you use the :d modifier then the expansion returns the directory
name less the final directory separator string. Thus successive pairs
of :d modifiers each remove a level of directory in the token string.
The infered names of targets :i modifier returnes the actual filename
associated to the target, see BINDING TARGETS. If the value is not a
target or prerequisite the value is returned unchanged. For the follow-
ing example:
test = aprog bprog
If aprog and bprog are targets or prerequisits and they are bound to
/tmp/aprog and bprog (see .SOURCE special target) the macro expansion
has the following effect:
$(test:i) -> /tmp/aprog bprog
The normalized path names :n modifier honors the setting of .WINPATH to
determine the output format of the result.
The map escape codes modifier changes the following escape codes \a =>
<bel>, \b => <backspace>, \f => <formfeed>, \n => <nl>, \r => <cr>, \t
=> <tab>, \v => <vertical tab>, \" => ", and \xxx => <xxx> where xxx is
the octal representation of a character into the corresponding ASCII
value.
The tokenization, prepend and append modifier may use the same escape
codes that are supported by the map escape codes modifier in the string
that is inserted, prepended or added by the respective macro modifier.
Dmake Version 4.12 2008-02-26 16
DMAKE(1) DMAKE(1)
These modifiers may quote this string to include otherwise problematic
characters. E.g. spaces, colons and parentheses.
The tokenization modifier takes all white space separated tokens from
the macro value and separates them by the separator string. Thus the
expansion:
$(test:f:t"+\n")
produces:
a.out+
f.out+
k.out
The prefix operator ^ takes all white space separated tokens from the
macro value and prepends string to each.
$(test:f:^mydir/)
produces:
mydir/a.out mydir/f.out mydir/k.out
The suffix operator + takes all white space separated tokens from the
macro value and appends string to each.
$(test:b:+.c)
produces:
a.c f.c k.c
The next non-standard form of macro expansion allows for recursive
macros. It is possible to specify a $(macro_name) or ${macro_name}
expansion where macro_name contains more $( ... ) or ${ ... } macro
expansions itself.
For example $(CC$(_HOST)$(_COMPILER)) will first expand
CC$(_HOST)$(_COMPILER) to get a result and use that result as the name
of the macro to expand. This is useful for writing a makefile for more
than one target environment. As an example consider the following
hypothetical case. Suppose that _HOST and _COMPILER are imported from
the environment and are set to represent the host machine type and the
host compiler respectively.
CFLAGS_VAX_CC = -c -O # _HOST == "_VAX", _COMPILER == "_CC"
CFLAGS_PC_MSC = -c -ML # _HOST == "_PC", _COMPILER == "_MSC"
# redefine CFLAGS macro as:
CFLAGS := $(CFLAGS$(_HOST)$(_COMPILER))
This causes CFLAGS to take on a value that corresponds to the environ-
ment in which the make is being invoked.
The final non-standard macro expansion is of the form:
string1{token_list}string2
where string1, string2 and token_list are expanded. After expansion,
string1 is prepended to each token found in token_list and string2 is
appended to each resulting token from the previous prepend. string1
and string2 are not delimited by white space whereas the tokens in
Dmake Version 4.12 2008-02-26 17
DMAKE(1) DMAKE(1)
token_list are. A null token in the token list is specified using "".
Thus using another example we have:
test/{f1 f2}.o --> test/f1.o test/f2.o
test/ {f1 f2}.o --> test/ f1.o f2.o
test/{f1 f2} .o --> test/f1 test/f2 .o
test/{"f1" ""}.o --> test/f1.o test/.o
and
test/{d1 d2}/{f1 f2}.o --> test/d1/f1.o test/d1/f2.o
test/d2/f1.o test/d2/f2.o
This last expansion is activated only when the first characters of
token_list appear immediately after the opening '{' with no intervening
white space. The reason for this restriction is the following incom-
patibility with Bourne Shell recipes. The line
{ echo hello;}
is valid /bin/sh syntax; while
{echo hello;}
is not. Hence the latter triggers the enhanced macro expansion while
the former causes it to be suppressed. See the SPECIAL MACROS section
for a description of the special macros that dmake defines and under-
stands.
RULES AND TARGETS
A makefile contains a series of entries that specify dependencies.
Such entries are called target/prerequisite or rule definitions. Each
rule definition is optionally followed by a set of lines that provide a
recipe for updating any targets defined by the rule. Whenever dmake
attempts to bring a target up to date and an explicit recipe is pro-
vided with a rule defining the target, that recipe is used to update
the target. A rule definition begins with a line having the following
syntax:
<targets> [<attributes>] <ruleop> [<prerequisites>] [;<recipe>]
targets is a non-empty list of targets. If the target is a special
target (see SPECIAL TARGETS section below) then it must appear alone on
the rule line. For example:
.IMPORT .ERROR : ...
is not allowed since both .IMPORT and .ERROR are special targets. Spe-
cial targets are not used in the construction of the dependency graph
and will not be made.
attributes is a possibly empty list of attributes. Any attribute
defined in the ATTRIBUTES section above may be specified. All
attributes will be applied to the list of named targets in the rule
definition. No other targets will be affected.
NOTE: As stated earlier, if both the target list and prerequisite
list are empty but the attributes list is not, then the
Dmake Version 4.12 2008-02-26 18
DMAKE(1) DMAKE(1)
specified attributes affect all targets in the makefile.
ruleop is a separator which is used to identify the targets from the
prerequisites. Optionally it also provides a facility for modifying
the way in which dmake handles the making of the associated targets.
In its simplest form the operator is a single ':', and need not be sep-
arated by white space from its neighboring tokens. It may additionally
be followed by any of the modifiers { !, ^, -, :, | }, where:
! says execute the recipe for the associated targets once for each
out of date prerequisite. (The meaning of the runtime macro $?
is changed, see below in the RUNTIME MACROS section.) Ordinarily
the recipe is executed once for all out of date prerequisites at
the same time.
^ says to insert the specified prerequisites, if any, before any
other prerequisites already associated with the specified tar-
gets. In general, it is not useful to specify ^ with an empty
list of prerequisites.
- says to clear the previous list of prerequisites before adding
the new prerequisites. Thus,
foo :
foo : bar baz
can be replaced by
foo :- bar baz
however the old form still works as expected.
: When the rule operator is not modified by a second ':' only one
set of rules may be specified for making a target. Multiple
definitions may be used to add to the list of prerequisites that
a target depends on. However, if a target is multiply defined
only one definition may specify a recipe for making the target.
When a target's rule operator is modified by a second ':' (::
for example) then this definition may not be the only definition
with a recipe for the target. There may be other :: target def-
inition lines that specify a different set of prerequisites with
a different recipe for updating the target. Any such target is
made if any of the definitions find it to be out of date with
respect to the related prerequisites and the corresponding
recipe is used to update the target. By definition all '::'
recipes that are found to be out of date for are executed.
In the following simple example, each rule has a `::' ruleop.
In such an operator we call the first `:' the operator, and the
second `:' the modifier.
a.o :: a.c b.h
first recipe for making a.o
a.o :: a.y b.h
second recipe for making a.o
Dmake Version 4.12 2008-02-26 19
DMAKE(1) DMAKE(1)
If a.o is found to be out of date with respect to a.c then the
first recipe is used to make a.o. If it is found out of date
with respect to a.y then the second recipe is used. If a.o is
out of date with respect to b.h then both recipes are invoked to
make a.o. In the last case the order of invocation corresponds
to the order in which the rule definitions appear in the make-
file.
| Is defined only for PERCENT rule target definitions. When spec-
ified it indicates that the following construct should be parsed
using the old semantinc meaning:
%.o :| %.c %.r %.f ; some rule
is equivalent to:
%.o : %.c ; some rule
%.o : %.r ; some rule
%.o : %.f ; some rule
Targets defined using a single `:' operator with a recipe may be rede-
fined again with a new recipe by using a `:' operator with a `:' modi-
fier. This is equivalent to a target having been initially defined
with a rule using a `:' modifier. Once a target is defined using a `:'
modifier it may not be defined again with a recipe using only the `:'
operator with no `:' modifier. In both cases the use of a `:' modifier
creates a new list of prerequisites and makes it the current prerequi-
site list for the target. The `:' operator with no recipe always modi-
fies the current list of prerequisites. Thus assuming each of the fol-
lowing definitions has a recipe attached, then:
joe : fred ... (1)
joe :: more ... (2)
and
joe :: fred ... (3)
joe :: more ... (4)
are legal and mean: add the recipe associated with (2), or (4) to the
set of recipes for joe, placing them after existing recipes for making
joe. The constructs:
joe :: fred ... (5)
joe : more ... (6)
and
joe : fred ... (7)
joe : more ... (8)
are errors since we have two sets of perfectly good recipes for making
the target.
prerequisites is a possibly empty list of targets that must be brought
up to date before making the current target.
recipe is a short form and allows the user to specify short rule defi-
nitions on a single line. It is taken to be the first recipe line in a
Dmake Version 4.12 2008-02-26 20
DMAKE(1) DMAKE(1)
larger recipe if additional lines follow the rule definition. If the
semi-colon is present but the recipe line is empty (ie. null string)
then it is taken to be an empty rule. Any target so defined causes
target to be treated as a virtual target, see VIRTUAL TARGETS below.
RECIPES
The traditional format used by most versions of Make defines the recipe
lines as arbitrary strings that may contain macro expansions. They
follow a rule definition line and may be spaced apart by comment or
blank lines. The list of recipe lines defining the recipe is termi-
nated by a new target definition, a macro definition, or end-of-file.
Each recipe line MUST begin with a <TAB> character (or spaces, see
.NOTABS) which may optionally be followed with one or all the following
recipe property characters '@%+-' which affect the recipe execution:
'-' indicates that non-zero exit values (ie. errors) are to be
ignored when this recipe line is executed.
'+' indicates that the current recipe line is to be executed using
the shell. Group recipes implicitely ignore this property.
'%' indicates that dmake should swap itself out to secondary storage
(MSDOS only) before running the recipe.
'@' indicates that the recipe line should NOT be echoed to the ter-
minal prior to being executed.
'@@' is a stronger version of the previous property. The recipe line
and the output (stdout and stderr) of the executed recipe are
NOT shown on the terminal.
Each property is off by default (ie. by default, errors are signifi-
cant, commands are echoed, no swapping is done and a shell is used only
if the recipe line contains a character found in the value of the
SHELLMETAS macro). Global settings activated via command line options
or special attribute or target names may also affect these settings.
An example recipe:
target :
first recipe line
second recipe line, executed independent of first.
@a recipe line that is not echoed
-and one that has errors ignored
%and one that causes dmake to swap out
+and one that is executed using a shell.
The second and new format of the recipe block begins the block with the
character '[' (the open group character) in the last non-white space
position of a line, and terminates the block with the character ']'
(the close group character) in the first non-white space position of a
line. In this form each recipe line need not have a leading TAB. This
is called a recipe group. Groups so defined are fed intact as a single
unit to a shell for execution whenever the corresponding target needs
to be updated. If the open group character '[' is preceded by one or
all of the recipe properties (-, %, @ and @@) then they apply to the
entire group in the same way that they apply to single recipe lines.
You may also specify '+' but it is redundant as a shell is already
being used to run the recipe. See the MAKING TARGETS section for a
description of how dmake invokes recipes. Here is an example of a
Dmake Version 4.12 2008-02-26 21
DMAKE(1) DMAKE(1)
group recipe:
target :
[
first recipe line
second recipe line
tall of these recipe lines are fed to a
single copy of a shell for execution.
]
BUILTIN COMMANDS
dmake supports some builtin commands. An optional leading '+' describes
that the builtin can be used also when being executed in a shell other-
wise it is only implemented when used directly. Remember that if a
character of the recipe is found in the SHELLMETAS macro the execution
of the recipe in a shell is forced.
[+]noop [something]
The noop internal command always returns success if used but it
is not executed even though the rest of the commandline is eval-
uated. This command can be used to evaluate macro expansions at
the runtime of the recipe without starting a real commmand.
[+]<empty recipe>
If an empty recipe line is encountered it is not executed. This
sounds more trivial than it really is because the recipe could
consist of macros that evaluated to empty or whitespace only
strings.
echo [-n] data
This internal command prints data (with all leading whitespace
removed, but otherwise literally) to stdout. If the '-n' switch
is given no trailing newline is printed. Note that no quoting is
removed nor that escape sequences are handled.
No special treatment of buildin commands for group recipes is imple-
mented even though the <empty recipe> will most propably also not be
evaluated by most shells that can be used to handle the recipe groups.
TEXT DIVERSIONS
dmake supports the notion of text diversions. If a recipe line con-
tains the macro expression
$(mktmp[,[file][,text]] data)
then all text contained in the data expression is expanded and is writ-
ten to a temporary file. The data in the file will always be termi-
nated from a new line character. The file parameter can be used to
override the name of the temporary file. If its expanded value is not
empty it will be used instead of the unique and thread safe file name
that otherwise would be generated internally. The return value of the
macro is the name of the temporary file unless the text parameter is
defined. In this case the return value is the expanded value of text.
data can be any text and must be separated from the 'mktmp' portion of
the macro name by white-space. The only restriction on the data text
is that it must contain a balanced number of parentheses of the same
kind as are used to initiate the $(mktmp ...) expression. For example:
Dmake Version 4.12 2008-02-26 22
DMAKE(1) DMAKE(1)
$(mktmp $(XXX))
is legal and works as expected, but:
$(mktmp text (to dump to file)
is not legal. You can achieve what you wish by either defining a macro
that expands to '(' or by using {} in the macro expression; like this:
${mktmp text (to dump to file}
Since the temporary file is opened when the macro containing the text
diversion expression is expanded, diversions may be nested and any
diversions that are created as part of ':=' macro expansions persist
for the duration of the dmake run. If the data text is to contain new
lines the map escape codes macro expasion can be used. For example the
expression:
mytext:=this is a\ntest of the text diversion
all:
cat $(mktmp $(mytext:m))
is replaced by:
cat /tmp/mk12294AA
where the temporary file contains two lines both of which are termi-
nated by a new-line. A second more illustrative example generates a
response file to an MSDOS link command:
OBJ = fred.obj mary.obj joe.obj
all : $(OBJ)
link @$(mktmp $(^:t"+\n"))
The result of making `all' in the second example is the command:
link @/tmp/mk02394AA
where the temporary file contains:
fred.obj+
mary.obj+
joe.obj
The last line of the file is terminated by a new-line which is always
inserted at the end of the data string.
If the optional file specifier is present it can be used to specify the
name of the temporary file to create. An example that would be useful
for MSDOS users with a Turbo-C compiler
$(mktmp,turboc.cfg $(CFLAGS))
will place the contents of CFLAGS into a local turboc.cfg file. The
second optional argument, text, if present alters the name of the value
returned by the $(mktmp ...) macro.
Under MS-DOS text diversions may be a problem. Many DOS tools require
that path names which contain directories use the \ character to
Dmake Version 4.12 2008-02-26 23
DMAKE(1) DMAKE(1)
delimit the directories. Some users however wish to use the '/' to
delimit pathnames and use environments that allow them to do so. The
macro USESHELL is set to "yes" if the current recipe is forced to use a
shell via the .USESHELL or '+' directives, otherwise its value is "no".
The dmake startup files define the macro DIVFILE whose value is either
the value of TMPFILE or the value of TMPFILE edited to replace any '/'
characters to the appropriate value based on the current shell and
whether it will be used to execute the recipe.
Previous versions of dmake defined text diversions using <+, +>
strings, where <+ started a text diversion and +> terminated one.
dmake is backward compatible with this construct only if the <+ and +>
appear literally on the same recipe line or in the same macro value
string. In such instances the expression:
<+data+>
is mapped to:
$(mktmp data)
which is fully output compatible with the earlier construct. <+, +>
constructs whose text spans multiple lines must be converted by hand to
use $(mktmp ...).
If the environment variable TMPDIR is defined then the temporary file
is placed into the directory specified by that variable. A makefile
can modify the location of temporary files by defining a macro named
TMPDIR and exporting it using the .EXPORT special target.
VIRTUAL TARGETS
Dmake allows to define targets with the sole purpose to enforce a
dependency chain that are unable to create the target, hence virtual
targets. When dmake tries to make a target, but only finds a target
definition without recipe lines, it would normally issues a "Don't know
how to make ..." error message, but if a target rule is terminated by a
semicolon and has no following recipe lines, or if it has no recipe
lines, but defines prerequisites, or if the AUGMAKE mode is enabled
(see the COMPATIBILITY section for details), the target is treated as a
virtual target and the error is suppressed. In addition to this, if the
default target does not have recipe lines it is also treated as a vir-
tual target.
Virtual targets should not have a corresponding file therefore they
inherit the time of their newest prerequisite if they have prerequi-
sites, otherwise they get the current time assigned when being made.
If the virtual target has a corresponding file a warning is issued, but
the time stamp of that file is taken into account. The virtual target
uses the time stamp of the corresponding file if it is newer than the
one determined by the previous rule.
SPECIAL TARGETS
This section describes the special targets that are recognized by
dmake. Some are affected by attributes and others are not.
.ERROR If defined then the recipe associated with this target is
executed whenever an error condition is detected by
dmake. All attributes that can be used with any other
target may be used with this target. Any prerequisites
Dmake Version 4.12 2008-02-26 24
DMAKE(1) DMAKE(1)
of this target will be brought up to date during its pro-
cessing. NOTE: errors will be ignored while making this
target, in extreme cases this may cause some problems.
.EXIT If this target is encountered while parsing a makefile
then the parsing of the makefile is immediately termi-
nated at that point.
.EXPORT All prerequisites associated with this target are assumed
to correspond to macro names and they and their values
are exported to the environment as environment strings at
the point in the makefile at which this target appears.
Any attributes specified with this target are ignored.
Only macros which have been assigned a value in the make-
file prior to the export directive are exported, macros
as yet undefined or macros whose value contains any of
the characters "+=:*" are not exported.
Note that macros that are not expanded during the macro
assignment and contain other macros will be written into
the environment containing these other macros in the form
of $(macroname).
.IMPORT Prerequisite names specified for this target are searched
for in the environment and defined as macros with their
value taken from the environment. If the special name
.EVERYTHING is used as a prerequisite name then all envi-
ronment variables defined in the environment are
imported. The functionality of the -E flag can be forced
by placing the construct .IMPORT : .EVERYTHING at the
start of a makefile. Similarly, by placing the construct
at the end, one can emulate the effect of the -e command
line flag. If a prerequisite name cannot be found in the
environment an error message is issued. .IMPORT accepts
the .IGNORE attribute. When given, it causes dmake to
ignore the above error. See the MACROS section for a
description of the processing of imported macro values.
.INCLUDE Parse another makefile just as if it had been located at
the point of the .INCLUDE in the current makefile. The
list of prerequisites gives the list of makefiles to try
to read. If the list contains multiple makefiles then
they are read in order from left to right. The following
search rules are used when trying to locate the file. If
the filename is surrounded by " or just by itself then it
is searched for in the current directory. If it is not
found it is then searched for in each of the directories
specified as prerequisites of the .INCLUDEDIRS special
target. If the file name is surrounded by < and >, (ie.
<my_spiffy_new_makefile>) then it is searched for only in
the directories given by the .INCLUDEDIRS special target.
In both cases if the file name is a fully qualified name
starting at the root of the file system then it is only
searched for once, and the .INCLUDEDIRS list is ignored.
If .INCLUDE fails to find the file it invokes the infer-
ence engine to try to infer and hence make the file to be
included. In this way the file can be checked out of an
RCS repository for example. .INCLUDE accepts the
.IGNORE, .SETDIR, and .NOINFER attributes. If the
Dmake Version 4.12 2008-02-26 25
DMAKE(1) DMAKE(1)
.IGNORE attribute is given and the file cannot be found
then dmake continues processing, otherwise an error mes-
sage is generated. If the .NOINFER attribute is given
and the file cannot be found then dmake will not attempt
to infer and make the file. The .SETDIR attribute causes
dmake to change directories to the specified directory
prior to attempting the include operation. If all fails
dmake attempts to make the file to be included. If mak-
ing the file fails then dmake terminates unless the
.INCLUDE directive also specified the .IGNORE attribute.
If .FIRST is specified along with .INCLUDE then dmake
attempts to include each named prerequisite and will ter-
minate the inclusion with the first prerequisite that
results in a successful inclusion.
.INCLUDEDIRS The list of prerequisites specified for this target
defines the set of directories to search when trying to
include a makefile.
.KEEP_STATE This special target is a synonym for the macro definition
.KEEP_STATE := _state.mk
It's effect is to turn on STATE keeping and to define
_state.mk as the state file.
.MAKEFILES The list of prerequisites is the set of files to try to
read as the default makefile. By default this target is
defined as:
.MAKEFILES : makefile.mk Makefile makefile
.REMOVE The recipe of this target is used whenever dmake needs to
remove intermediate targets that were made but do not
need to be kept around. Such targets result from the
application of transitive closure on the dependency
graph.
.ROOT The internal root of the dependency graph, see section
STARTUP for details.
.SOURCE The prerequisite list of this target defines a set of
directories to check when trying to locate a target file
name. See the section on BINDING of targets for more
information.
.SOURCE.suff The same as .SOURCE, except that the .SOURCE.suff list is
searched first when trying to locate a file matching the
a target whose name ends in the suffix .suff.
.SUFFIXES This deprecated special target has no special meaning.
Avoid its use.
.TARGETS The internal targets that all user defined targets are
prerequisites of, see section STARTUP for details.
There are a few targets that are "slightly" special:
Dmake Version 4.12 2008-02-26 26
DMAKE(1) DMAKE(1)
.INIT
.DONE
These targets exist because of historical reasons, see the usage of
.INIT and .DONE in section "STARTUP", they can be used and defined as
ordinary targets but are special in the sense that even though they
start with a `.' they are not treated as a .<suffix> meta target (See
the AUGMAKE META RULES section for details).
Please note that self defined targets shouldn't use the prefix `.' as
they would be handled as .<suffix> meta targets and dmake most propably
would complain about this.
In addition to the special targets above, several other forms of tar-
gets are recognized and are considered special, their exact form and
use is defined in the sections that follow.
SPECIAL MACROS
dmake defines a number of special macros. They are divided into three
classes: control macros, run-time macros, and function macros. The
control macros are used by dmake to configure its actions, and are the
preferred method of doing so. In the case when a control macro has the
same function as a special target or attribute they share the same name
as the special target or attribute. The run-time macros are defined
when dmake makes targets and may be used by the user inside recipes.
The function macros provide higher level functions dealing with macro
expansion and diversion file processing.
CONTROL MACROS
To use the control macros simply assign them a value just like any
other macro. The control macros are divided into three groups: string
valued macros, character valued macros, and boolean valued macros.
The following are all of the string valued macros. This list is
divided into two groups. The first group gives the string valued
macros that are defined internally and cannot be directly set by the
user.
ABSMAKECMD Warning! This macro's value is differently defined for
a native Windows dmake executable (compiled with MS
Visual C++ or MinGW) and dmake for other operating sys-
tems or build with other compilers.
In the first case its value is the absolute filename of
the executable of the current dmake process, otherwise
it is defined as the NULL string.
INCDEPTH This macro's value is a string of digits representing
the current depth of makefile inclusion. In the first
makefile level this value is zero.
MFLAGS Is the list of flags that were given on the command
line including a leading switch character. The -f flag
is not included in this list.
MAKECMD Is the name with which dmake was invoked.
MAKEDIR Is the full path to the initial directory in which
dmake was invoked.
Dmake Version 4.12 2008-02-26 27
DMAKE(1) DMAKE(1)
MAKEFILE Contains the string "-f makefile" where, makefile is
the name of initial user makefile that was first read.
MAKEFLAGS Is the same as $(MFLAGS) but has no leading switch
character. (ie. MFLAGS = -$(MAKEFLAGS))
MAKEMACROS Contains the complete list of macro expressions that
were specified on the command line.
MAKETARGETS Contains the name(s) of the target(s), if any, that
were specified on the command line.
MAKEVERSION Contains a string indicating the current dmake version
number.
MAXPROCESSLIMIT Is a numeric string representing the maximum number of
processes that dmake can use when making targets using
parallel mode.
NULL Is permanently defined to be the NULL string. This is
useful when comparing a conditional expression to an
NULL value.
PWD Is the full path to the current directory in which make
is executing.
SPACECHAR Is permanently defined to contain one space character.
This is useful when using space characters in function
macros, e.g. subst, that otherwise would get deleted
(leading/trailing spaces) or for using spaces in func-
tion macro parameters.
TMPFILE Is set to the name of the most recent temporary file
opened by dmake. Temporary files are used for text
diversions and for group recipe processing.
TMD Stands for "To Make Dir", and is the path from the
present directory (value of $(PWD)) to the directory
that dmake was started up in (value of $(MAKEDIR)). If
the present directory is the directory that dmake was
started up in TMD will be set to the relative path ".".
This allows to create valid paths by prepending
$(TMD)$(DIRSEPSTR) to a relative path. This macro is
modified when .SETDIR attributes are processed. TMD
will usually be a relative path with the following two
exceptions. If the relative path would go up until the
root directory or if different drive letters (DOS file
system) make a relative path impossible the absolute
path from MAKEDIR is used.
USESHELL The value of this macro is set to "yes" if the current
recipe is forced to use a shell for its execution via
the .USESHELL or '+' directives, its value is "no" oth-
erwise.
The second group of string valued macros control dmake behavior and may
be set by the user.
Dmake Version 4.12 2008-02-26 28
DMAKE(1) DMAKE(1)
.DIRCACHE If set to "yes" enables the directory cache (this is
the default). If set to "no" disables the directory
cache (equivalent to -d command-line flag).
.DIRCACHERESPCASE
If set to "yes" causes the directory cache, if enabled,
to respect file case, if set to "no" files are cached
case insensitive. By default it is set to "no" on Win-
dows as the filesystems on this operating system are
case insensitive and set to "yes" for all other operat-
ing systems. The default can be overriden, if desired.
Note: Using case insensitive directory caching on case
sensitive file systems is a BAD idea. If in doubt use
case sensitive directory caching even on case insensi-
tive file systems as the worst case in this scenario is
that /foo/bar/ and /foo/BAR/ are cached separately
(with the same content) even though they are the same
directory. This would only happen if different targets
use different upper/lower case spellings for the same
directory and that is never a good idea.
NAMEMAX Defines the maximum length of a filename component.
The value of the variable is initialized at startup to
the value of the compiled macro NAME_MAX. On some sys-
tems the value of NAME_MAX is too short by default.
Setting a new value for NAMEMAX will override the com-
piled value.
.NOTABS When set to "yes" enables the use of spaces as well as
<tabs> to begin recipe lines. By default a non-group
recipe is terminated by a line without any leading
white-space or by a line not beggining with a <tab>
character. Enabling this mode modifies the first con-
dition of the above termination rule to terminate a
non-group recipe with a line that contains only
white-space. This mode does not effect the parsing of
group recipes bracketed by [].
AUGMAKE If set to "yes" value will enable the transformation of
special meta targets to support special AUGMAKE infer-
ences (See the "AUGMAKE META RULES" and "COMPATIBILITY"
sections).
DIRBRKSTR Contains the string of chars used to terminate the name
of a directory in a pathname. Under UNIX its value is
"/", under MSDOS its value is "/\:".
DIRSEPSTR Contains the string that is used to separate directory
components when path names are constructed. It is
defined with a default value at startup.
DIVFILE Is defined in the startup file and gives the name that
should be returned for the diversion file name when
used in $(mktmp ...) expansions, see the TEXT DIVERSION
section for details.
.KEEP_STATE Assigning this macro a value tells dmake the name of
the state file to use and turns on the keeping of state
Dmake Version 4.12 2008-02-26 29
DMAKE(1) DMAKE(1)
information for any targets that are brought up to date
by the make.
GROUPFLAGS This macro gives the set of flags to pass to the shell
when invoking it to execute a group recipe. The value
of the macro is the list of flags with a leading switch
indicator. (ie. `-' under UNIX)
GROUPSHELL This macro defines the full path to the executable
image to be used as the shell when processing group
recipes. This macro must be defined if group recipes
are used. It is assigned a default value in the
startup makefile. Under UNIX this value is /bin/sh.
GROUPSUFFIX If defined, this macro gives the string to use as a
suffix when creating group recipe files to be handed to
the command interpreter. For example, if it is defined
as .sh, then all temporary files created by dmake will
end in the suffix .sh. Under MSDOS if you are using
command.com as your GROUPSHELL, then this suffix must
be set to .bat in order for group recipes to function
correctly. The setting of GROUPSUFFIX and GROUPSHELL
is done automatically for command.com in the startup.mk
files.
MAKE Is defined in the startup file by default. Initially
this macro is defined to have the value "$(MAKECMD)
$(MFLAGS)". The string $(MAKE) is recognized when
using the -n switch.
MAKESTARTUP This macro defines the full path to the initial startup
makefile. Use the -V command line option to discover
its initial value.
MAXLINELENGTH This macro defines the maximum size of a single line of
makefile input text. The size is specified as a num-
ber, the default value is defined internally and is
shown via the -V option. A buffer of this size plus 2
is allocated for reading makefile text. The buffer is
freed before any targets are made, thereby allowing
files containing long input lines to be processed with-
out consuming memory during the actual make. This
macro can only be used to extend the line length beyond
it's default minimum value.
MAXPROCESS Specify the maximum number of child processes to use
when making targets. The default value of this macro
is "1" and its value cannot exceed the value of the
macro MAXPROCESSLIMIT. Setting the value of MAXPROCESS
on the command line or in the makefile is equivalent to
supplying a corresponding value to the -P flag on the
command line. If the global .SEQUENTIAL attribute is
set (or the -S command line switch is used) the value
of MAXPROCESS is fixed to "1" and cannot be changed.
OOODMAKEMODE This macro enables a special compatibility mode needed
by the OpenOffice.org build system. If set, the switch
disables the removal of leading './' path elements dur-
ing target filename normalization (See BINDING
Dmake Version 4.12 2008-02-26 30
DMAKE(1) DMAKE(1)
TARGETS). If './' appear in the pathname, but not at
the beginning of it, they are still removed by the nor-
malization. Please note that targets that are given on
the command line are going to be registered as default
targets after the startup file is read.
PREP This macro defines the number of iterations to be
expanded automatically when processing % rule defini-
tions of the form:
% : %.suff
See the sections on PERCENT(%) RULES for details on how
PREP is used.
SHELL This macro defines the full path to the executable
image to be used as the shell when processing single
line recipes. This macro must be defined if recipes
requiring the shell for execution are to be used. It
is assigned a default value in the startup makefile.
Under UNIX this value is /bin/sh.
SHELLCMDQUOTE This macro can be used to add additional characters
before and after the command string that is passed to
the shell defined by the SHELL macro. If needed, like
for cmd.exe and command.com, it is assigned a value in
the startup file.
SHELLFLAGS This macro gives the set of flags to pass to the shell
when invoking it to execute a single line recipe. The
value of the macro is the list of flags with a leading
switch indicator. (ie. `-' under UNIX)
SHELLMETAS Each time dmake executes a single recipe line (not a
group recipe) the line is searched for any occurrence
of a character defined in the value of SHELLMETAS. If
such a character is found the recipe line is defined to
require a shell to ensure its correct execution. In
such instances a shell is used to invoke the recipe
line. If no match is found the recipe line is executed
without the use of a shell.
There is only one character valued macro defined by dmake: SWITCHAR
contains the switch character used to introduce options on command
lines. For UNIX its value is `-', and for MSDOS its value may be `/'
or `-'. The macro is internally defined and is not user setable. The
MSDOS version of dmake attempts to first extract SWITCHAR from an envi-
ronment variable of the same name. If that fails it then attempts to
use the undocumented getswitchar system call, and returns the result of
that. Under MSDOS version 4.0 you must set the value of the environ-
ment macro SWITCHAR to '/' to obtain predictable behavior.
All boolean macros currently understood by dmake correspond directly to
the previously defined attributes. These macros provide a second way
to apply global attributes, and represent the preferred method of doing
so. They are used by assigning them a value. If the value is not a
NULL string then the boolean condition is set to on. If the value is a
NULL string then the condition is set to off. There are five
Dmake Version 4.12 2008-02-26 31
DMAKE(1) DMAKE(1)
conditions defined and they correspond directly to the attributes of
the same name. Their meanings are defined in the ATTRIBUTES section
above. The macros are: .EPILOG, .IGNORE, .MKSARGS, .NOINFER, .PRE-
CIOUS, .PROLOG, .SEQUENTIAL, .SILENT, .SWAP, and .USESHELL. Assigning
any of these a non NULL value will globally set the corresponding
attribute to on.
RUNTIME MACROS
These macros are defined when dmake is making targets, and may take on
different values for each target. $@ is defined to be the full target
name, $? is the list of all out of date prerequisites, except for the !
ruleop, in which case it is set to the current build prerequisite
instead. $& is the list of all prerequisites, $> is the name of the
library if the current target is a library member, and $< is the list
of prerequisites specified in the current rule. If the current target
had a recipe inferred then $< is the name of the inferred prerequisite
even if the target had a list of prerequisites supplied using an
explicit rule that did not provide a recipe. In such situations $&
gives the full list of prerequisites.
$* is defined as $(@:db) when making targets with explicit recipes and
is defined as the value of % when making targets whose recipe is the
result of an inference. In the first case $* is the target name with
no suffix, and in the second case, is the value of the matched % pat-
tern from the associated %-rule. $^ expands to the set of out of date
prerequisites taken from the current value of $<. In addition to
these, $$ expands to $, {{ expands to {, }} expands to }, and the
strings <+ and +> are recognized as respectively starting and terminat-
ing a text diversion when they appear literally together in the same
input line.
The difference between $? and $^ can best be illustrated by an example,
consider:
fred.out : joe amy hello
rules for making fred
fred.out : my.c your.h his.h her.h # more prerequisites
Assume joe, amy, and my.c are newer then fred.out. When dmake executes
the recipe for making fred.out the values of the following macros will
be:
$@ --> fred.out
$* --> fred
$? --> joe amy my.c # note output of $? vs $^
$^ --> joe amy
$< --> joe amy hello
$& --> joe amy hello my.c your.h his.h her.h
FUNCTION MACROS
dmake supports a full set of functional macros. One of these, the
$(mktmp ...) macro, is discussed in detail in the TEXT DIVERSION sec-
tion and is not covered here. The names of function macros must appear
literally after the opening $( or ${. They are not recognized if they
are the result of a recursive expansion.
Note that some of these macros take comma separated parameters but that
Dmake Version 4.12 2008-02-26 32
DMAKE(1) DMAKE(1)
these parameters must not contain literal whitespaces. Whitespaces in
macros used in these parameters are allowed.
$(and macroterm ...)
expands each macroterm in turn until there are no more or
one of them returns an empty string. If all expand to
non-empty strings the macro returs the string "t" other-
wise it returns an empty string.
$(assign expression)
Causes expression to be parsed as a macro assignment
expression and results in the specified assignment being
made. An error is issued if the assignment is not
syntatically correct. expression may contain white
space. This is in effect a dynamic macro assignment
facility and may appear anywhere any other macro may
appear. The result of the expanding a dynamic macro
assignment expression is the name of the macro that was
assigned and $(NULL) if the expression is not a valid
macro assignment expression. Some examples are:
$(assign foo := fred)
$(assign $(ind_macro_name) +:= $(morejunk))
$(echo list)
Echo's the value of list. list is not expanded.
$(eq,text_a,text_b true false)
expands text_a and text_b and compares their results. If
equal it returns the result of the expansion of the true
term, otherwise it returns the expansion of the false
term.
$(!eq,text_a,text_b true false)
Behaves identically to the previous macro except that the
true string is chosen if the expansions of the two
strings are not equal
$(foreach,var,list data)
Implements iterative macro expansion over data using var
as the iterator taking on values from list. var and list
are expanded and the result is the concatenation of
expanding data with var being set to each whitespace sep-
arated token from list. For example:
list = a b c
all :; echo [$(foreach,i,$(list) [$i])]
will output
[[a] [b] [c]]
The iterator variable is defined as a local variable to
this foreach instance. The following expression illus-
trates this:
$(foreach,i,$(foreach,i,$(sort c a b) root/$i) [$i/f.h])
Dmake Version 4.12 2008-02-26 33
DMAKE(1) DMAKE(1)
when evaluated the result is:
[root/a/f.h] [root/b/f.h] [root/c/f.h]
The specification of list must be a valid macro expres-
sion, such as:
$($(assign list=a b c))
$(sort d a b c)
$(echo a b c)
and cannot just be the list itself. That is, the follow-
ing foreach expression:
$(foreach,i,a b c [$i])
yields:
"b c [a]"
when evaluated.
$(nil expression)
Always returns the value of $(NULL) regardless of what
expression is. This function macro can be used to dis-
card results of expanding macro expressions.
$(normpath list)
Will return the normalized path names of all white-space
separated tokens in list. Quotes can be used to normalize
path names that contain white-space characters. On cygwin
the result honors the setting of .WINPATH to determine
the output format of the returned path names.
$(normpath,para list)
Same as above except that the expanded value of para is
used to override the .WINPATH setting.
$(not macroterm)
expands macroterm and returs the string "t" if the result
of the expansion is the empty string; otherwise, it
returns the empty string.
$(null,text true false)
expands the value of text. If it is NULL then the macro
returns the value of the expansion of true and the expan-
sion of false otherwise. The terms true, and false must
be strings containing no white-space.
$(!null,text true false)
Behaves identically to the previous macro except that the
true string is chosen if the expansion of text is not
NULL.
$(or macroterm ...)
expands each macroterm in turn and returs the empty
string if each term expands to the empty string; other-
wise, it returs the string "t".
Dmake Version 4.12 2008-02-26 34
DMAKE(1) DMAKE(1)
$(shell command)
is a shell escape macro. It runs command as if it were
part of a recipe and returns, separated by a single
space, all the non-white space terms written to stdout by
the command. For example:
$(shell ls *.c)
will return "a.c b.c c.c d.c" if the files exist in the
current directory. The recipe modification flags [+@%-]
are honored if they appear as the first characters in the
command. For example:
$(shell +ls *.c)
will run the command using the current shell.
Note that if the macro is part of a recipe it will be
evaluated after all previous recipe lines have been exe-
cuted. For obvious reasons it will be evaluated before
the current recipe line or group recipe is executed.
$(shell,expand command)
Is an extension to the $(shell command) function macro
that expands the result of running command.
$(sort list)
Will take all white-space separated tokens in list and
will return their sorted equivalent list.
$(strip data)
Will replace all strings of white-space in data by a sin-
gle space.
$(subst,pat,replacement data)
Will search for pat in data and will replace any occur-
rence of pat with the replacement string. The expansion
$(subst,.o,.c $(OBJECTS))
is equivalent to:
$(OBJECTS:s/.o/.c/)
$(uniq list)
Will take all white-space separated tokens in list and
will return their sorted equivalent list containing no
duplicates.
For historic reasons dmake treats the following case slightly special:
$(name something)
If it encounters a macro with a whitespace after name and name is not
literally one of the above mentioned function macro identifiers then
dmake will return the recursively expanded value of $(name). The
remaining something part will be expanded but the result will be dis-
carded. The use of this special feature is deprecated and should not be
Dmake Version 4.12 2008-02-26 35
DMAKE(1) DMAKE(1)
used.
CONDITIONAL MACROS
dmake supports conditional macros. These allow the definition of tar-
get specific macro values. You can now say the following:
target ?= MacroName MacroOp Value
This creates a definition for MacroName whose value is Value only when
target is being made. You may use a conditional macro assignment any-
where that a regular macro assignment may appear, including as the
value of a $(assign ...) macro.
The new definition is associated with the most recent cell definition
for target. If no prior definition exists then one is created. The
implications of this are immediately evident in the following example:
foo := hello
all : cond;@echo "all done, foo=[$(foo)] bar=[$(bar)]"
cond ?= bar := global decl
cond .SETDIR=unix::;@echo $(foo) $(bar)
cond ?= foo := hi
cond .SETDIR=msdos::;@echo $(foo) $(bar)
cond ?= foo := hihi
The first conditional assignment creates a binding for 'bar' that is
activated when 'cond' is made. The bindings following the :: defini-
tions are activated when their respective recipe rules are used. Thus
the first binding serves to provide a global value for 'bar' while any
of the cond :: rules are processed, and the local bindings for 'foo'
come into effect when their associated :: rule is processed.
Conditionals for targets of .UPDATEALL are all activated before the
target group is made. Assignments are processed in order. Note that
the value of a conditional macro assignment is NOT AVAILABLE until the
associated target is made, thus the construct
mytarget ?= bar := hello
mytarget ?= foo := $(bar)
results in $(foo) expanding to "", if you want the result to be "hello"
you must use:
mytarget ?= bar := hello
mytarget ?= foo = $(bar)
Once a target is made any associated conditional macros are deactivated
and their values are no longer available. Activation occurrs after all
inference, and .SETDIR directives have been processed and after $@ is
assigned, but before prerequisites are processed; thereby making the
values of conditional macro definitions available during construction
of prerequisites.
If a %-meta rule target has associated conditional macro assignments,
Dmake Version 4.12 2008-02-26 36
DMAKE(1) DMAKE(1)
and the rule is chosen by the inference algorithm then the conditional
macro assignments are inferred together with the associated recipe.
DYNAMIC PREREQUISITES
dmake looks for prerequisites whose names contain macro expansions dur-
ing target processing. Any such prerequisites are expanded and the
result of the expansion is used as the prerequisite name. As an exam-
ple the line:
fred : $$@.c
causes the $$@ to be expanded when dmake is making fred, and it
resolves to the target fred. This enables dynamic prerequisites to be
generated. The value of @ may be modified by any of the valid macro
modifiers. So you can say for example:
fred.out : $$(@:b).c
where the $$(@:b) expands to fred. Note the use of $$ instead of $ to
indicate the dynamic expansion, this is due to the fact that the rule
line is expanded when it is initially parsed, and $$ then returns $
which later triggers the dynamic prerequisite expansion. Dynamic macro
expansion is performed in all user defined rules, and the special tar-
gets .SOURCE*, and .INCLUDEDIRS.
NOTE: The use of a $ as part of a prerequisite or target name is
strongly discouraged as the runtime macros (like $@) are expanded when
used in a recipe line so that the $ is interpreted as a macro identi-
fier and not as a character of the filename leading to invalid runtime
macros. In addition to this no filename normalization is done for pre-
requisites and targets that contain $ characters. Nevertheless it is
possible to use $ in prerequisites by using $$$$ but this is not recom-
mended and can lead to surprising results.
If dynamic macro expansion results in multiple white space separated
tokens then these are inserted into the prerequisite list inplace of
the dynamic prerequisite. Due to the recursive nature of macro expan-
sion the prerequisite list is fully expanded even if the dynamic pre-
requisite contained other runtime macros.
BINDING TARGETS
This operation takes a target name and binds it to an existing file, if
possible. dmake makes a distinction between the internal target name
of a target and its associated external file name. Thus it is possible
for a target's internal name and its external file name to differ. To
perform the binding, the following set of rules is used. Assume that
we are trying to bind a target whose name is of the form X.suff, where
.suff is the suffix and X is the stem portion (ie. that part which con-
tains the directory and the basename). dmake takes this target name
and performs a series of search operations that try to find a suitably
named file in the external file system. The search operation is user
controlled via the settings of the various .SOURCE targets.
1. If target has the .SYMBOL attribute set then look for it
in the library. If found, replace the target name with
the library member name and continue with step 2. If the
name is not found then return.
2. Extract the suffix portion (that following the `.') of
the target name. If the suffix is not null, look up the
Dmake Version 4.12 2008-02-26 37
DMAKE(1) DMAKE(1)
special target .SOURCE.<suff> (<suff> is the suffix). If
the special target exists then search each directory
given in the .SOURCE.<suff> prerequisite list for the
target. If the target's suffix was null (ie. .suff was
empty) then perform the above search but use the special
target .SOURCE.NULL instead. If at any point a match is
found then terminate the search. If a directory in the
prerequisite list is the special name `.NULL ' perform a
search for the full target name without prepending any
directory portion (ie. prepend the NULL directory).
3. The search in step 2. failed. Repeat the same search but
this time use the special target .SOURCE. (a default
target of '.SOURCE : .NULL' is defined by dmake at
startup, and is user redefinable)
4. The search in step 3. failed. If the target has the
library member attribute (.LIBMEMBER) set then try to
find the target in the library which was passed along
with the .LIBMEMBER attribute (see the MAKING LIBRARIES
section). The bound file name assigned to a target which
is successfully located in a library is the same name
that would be assigned had the search failed (see 5.).
5. The search failed. Either the target was not found in
any of the search directories or no applicable .SOURCE
special targets exist. If applicable .SOURCE special
targets exist, but the target was not found, then dmake
assigns the first name searched as the bound file name.
If no applicable .SOURCE special targets exist, then the
full original target name becomes the bound file name.
There is potential here for a lot of search operations. The trick is
to define .SOURCE.x special targets with short search lists and leave
.SOURCE as short as possible. The search algorithm has the following
useful side effect. When a target having the .LIBMEMBER (library mem-
ber) attribute is searched for, it is first searched for as an ordinary
file. When a number of library members require updating it is desir-
able to compile all of them first and to update the library at the end
in a single operation. If one of the members does not compile and
dmake stops, then the user may fix the error and make again. dmake
will not remake any of the targets whose object files have already been
generated as long as none of their prerequisite files have been modi-
fied as a result of the fix.
When dmake constructs target (and prerequisite) pathnames they are nor-
malized to the shortest (or most natural, see below for the cygwin
case) representation. Substrings like './' or of the form 'baz/..' are
removed and multiple slashes are collapsed to one unless they are at
the beginning of the pathname. Leading slashes are normalized according
to POSIX rules, i.e. more than two leading slashes are reduced to one
slash and a leading '//' is kept as it might have a special meaning.
For example "./foo", "bar/../foo" and foo are recognized as the same
file. This may result in somewhat unexpected values of the macro
expansion of runtime macros like $@, but is infact the corect result.
NOTE: A cygwin dmake executable will accept DOS like pathnames with
drive letters and cygwin POSIX pathnames and normalize them into its
natural POSIX representation. This might result in even more surpris-
ing values of runtime macros.
Dmake Version 4.12 2008-02-26 38
DMAKE(1) DMAKE(1)
When defining .SOURCE and .SOURCE.x targets the construct
.SOURCE :
.SOURCE : fred gery
is equivalent to
.SOURCE :- fred gery
dmake correctly handles the UNIX Make variable VPATH. By definition
VPATH contains a list of ':' separated directories to search when look-
ing for a target. dmake maps VPATH to the following special rule:
.SOURCE :^ $(VPATH:s/:/ /)
Which takes the value of VPATH and sets .SOURCE to the same set of
directories as specified in VPATH.
PERCENT(%) RULES AND MAKING INFERENCES
When dmake makes a target, the target's set of prerequisites (if any)
must exist and the target must have a recipe which dmake can use to
make it. If the makefile does not specify an explicit recipe for the
target then dmake uses special rules to try to infer a recipe which it
can use to make the target. Previous versions of Make perform this
task by using rules that are defined by targets of the form .<suf-
fix>.<suffix> (this is still supported, see "AUGMAKE META RULES") or by
using the not supported by dmake .SUFFIXES list of suffixes (see "SPE-
CIAL TARGETS" for more details about .SUFFIXES). The exact workings of
this mechanism were sometimes difficult to understand and often limit-
ing in their usefulness. Instead, dmake supports the concept of %-meta
rules. The syntax and semantics of these rules differ from standard
rule lines as follows:
<%-targets> [<attributes>] <ruleop> [<%-prereqs>] [;<recipe>]
where %-targets are one or more targets containing exactly a single `%'
sign, attributes is a list (possibly empty) of attributes, ruleop is
the standard set of rule operators, %-prereqs , if present, is a list
of prerequisites containing zero or more `%' signs, and recipe, if
present, is the first line of the recipe.
If more than one %-target is present this line is equivalent to a repe-
tition of the whole [<attributes>] <ruleop> [<%-prereqs>] [;<recipe>]
sequence for each %-target, i.e. it is possible to specify the same
rule for multiple %-targets. Because of this following only speaks
about <%-target> as %-targets are divided into multiple definitions
with a single %-target.
NOTE: As multiple %-targets didn't work reliably with dmake versions
prior to 4.5 unless the rule operator `|:' was used we currently issue
a warning stating that it now works.
The %-target defines a pattern against which a target whose recipe is
being inferred gets matched. The pattern match goes as follows: all
chars are matched exactly from left to right up to but not including
the % sign in the pattern, % then matches the longest string from the
actual target name not ending in the suffix given after the % sign in
the pattern. Consider the following examples:
%.c matches fred.c but not joe.c.Z
dir/%.c matches dir/fred.c but not dd/fred.c
fred/% matches fred/joe.c but not f/joe.c
% matches anything
Dmake Version 4.12 2008-02-26 39
DMAKE(1) DMAKE(1)
In each case the part of the target name that matched the % sign is
retained and is substituted for any % signs in the prerequisite list of
the %-meta rule when the rule is selected during inference and dmake
constructs the new dependency.
Please note, that only the first, non-indirect, prerequisite of the
list is used for the inference mechanism. If more than one non-indirect
prerequisite is given a warning is issued and all but the first non-
indirect prerequisites are ignored. See below for a description of
indirect prerequisites.
As an example the following %-meta rules describe the following:
%.c : %.y ; recipe...
describes how to make any file ending in .c if a corresponding file
ending in .y can be found.
foo%.o : fee%.k ; recipe...
is used to describe how to make fooxxxx.o from feexxxx.k.
%.a :; recipe...
describes how to make a file whose suffix is .a without inferring any
prerequisites.
%.c : %.y 'yaccsrc/%.y' ; recipe...
matches the corresponding .y file as prerequisite and additionally
another .y file in the yaccsrc subdirectory as indirect prerequisite.
Another interesting example is:
% : RCS/%,v ; co $<
which describes how to take any target and check it out of the RCS
directory if the corresponding file exists in the RCS directory. The
equivalent SCCS rule would be:
% : s.% ; get $<
The previous RCS example defines an infinite rule, because it says how
to make anything from RCS/%,v, and anything also includes RCS/fred.c,v.
To limit the size of the graph that results from such rules dmake uses
the macro variable PREP (stands for % repetition). By default the
value of this variable is 0, which says that no repetitions of a %-rule
are to be generated. If it is set to something greater than 0, then
that many repetitions of any infinite %-rule are allowed. If in the
above example PREP was set to 1, then dmake would generate the depen-
dency graph:
% --> RCS/%,v --> RCS/RCS/%,v,v
Where each link is assigned the same recipe as the first link. PREP
should be used only in special cases, since it may result in a large
increase in the number of possible prerequisites tested. dmake further
assumes that any target that has no suffix can be made from a prerequi-
site that has at least one suffix.
dmake supports dynamic prerequisite generation for prerequisites of
%-meta rules. This is best illustrated by an example. The RCS rule
shown above can infer how to check out a file from a corresponding RCS
file only if the target is a simple file name with no directory
Dmake Version 4.12 2008-02-26 40
DMAKE(1) DMAKE(1)
information. That is, the above rule can infer how to find
RCS/fred.c,v from the target fred.c, but cannot infer how to find
srcdir/RCS/fred.c,v from srcdir/fred.c because the above rule will
cause dmake to look for RCS/srcdir/fred.c,v; which does not exist
(assume that srcdir has its own RCS directory as is the common case).
A more versatile formulation of the above RCS check out rule is the
following:
% : $$(@:d)RCS/$$(@:f),v : co $@
This rule uses the dynamic macro $@ to specify the prerequisite to try
to infer. During inference of this rule the macro $@ is set to the
value of the target of the %-meta rule and the appropriate prerequisite
is generated by extracting the directory portion of the target name (if
any), appending the string RCS/ to it, and appending the target file
name with a trailing ,v attached to the previous result.
dmake can also infer indirect prerequisites. An inferred target can
have a list of prerequisites added that will not show up in the value
of $< but will show up in the value of $? and $&. Indirect prerequi-
sites are specified in an inference rule by quoting the prerequisite
with single quotes. For example, if you had the explicit dependency:
fred.o : fred.c ; rule to make fred.o
fred.o : local.h
then this can be inferred for fred.o from the following inference rule:
%.o : %.c 'local.h' ; makes a .o from a .c
You may infer indirect prerequisites that are a function of the value
of '%' in the current rule. The meta-rule:
%.o : %.c '$(INC)/%.h' ; rule to make a .o from a .c
infers an indirect prerequisite found in the INC directory whose name
is the same as the expansion of $(INC), and the prerequisite name
depends on the base name of the current target. The set of indirect
prerequisites is attached to the meta rule in which they are specified
and are inferred only if the rule is used to infer a recipe for a tar-
get. They do not play an active role in driving the inference algo-
rithm. The construct:
%.o :| %.c %.f 'local.h'; recipe
is equivalent to:
%.o : %.c 'local.h' ; recipe
%.o : %.f 'local.h' ; recipe
If any of the attributes .EPILOG, .IGNORE, .LIBRARY, .NOSTATE, .PHONY,
.PRECIOUS, .PROLOG, .SETDIR, .SILENT, .SWAP, .USESHELL and .WINPATH are
given for a %-rule then when that rule is bound to a target as the
result of an inference, the target's set of attributes is augmented by
the attributes from the above set that are specified in the bound
%-rule. Other attributes specified for %-meta rules are not inherited
by the target. The .SETDIR attribute is treated in a special way. If
the target already had a .SETDIR attribute set then dmake changes to
that directory prior to performing the inference. During inference any
.SETDIR attributes for the inferred prerequisite are honored. The
directories must exist for a %-meta rule to be selected as a possible
inference path. If the directories do not exist no error message is
Dmake Version 4.12 2008-02-26 41
DMAKE(1) DMAKE(1)
issued, instead the corresponding path in the inference graph is
rejected.
dmake bases all of its inferences on the inference graph constructed
from the %-rules defined in the makefile. It knows exactly which tar-
gets can be made from which prerequisites by making queries on the
inference graph.
For a %-meta rule to be inferred as the rule whose recipe will be used
to make a target, the target's name must match the %-target pattern,
and any inferred %-prerequisite must already exist or have an explicit
recipe so that the prerequisite can be made. Without transitive clo-
sure on the inference graph the above rule describes precisely when an
inference match terminates the search. If transitive closure is
enabled (the usual case), and a prerequisite does not exist or cannot
be made, then dmake invokes the inference algorithm recursively on the
prerequisite to see if there is some way the prerequisite can be manu-
factured. For, if the prerequisite can be made then the current target
can also be made using the current %-meta rule. This means that there
is no longer a need to give a rule for making a .o from a .y if you
have already given a rule for making a .o from a .c and a .c from a .y.
In such cases dmake can infer how to make the .o from the .y via the
intermediary .c and will remove the .c when the .o is made. Transitive
closure can be disabled by giving the -T switch on the command line.
A word of caution. dmake bases its transitive closure on the %-meta
rule targets. When it performs transitive closure it infers how to
make a target from a prerequisite by performing a pattern match as if
the potential prerequisite were a new target. The set of rules:
%.o : %.c ; rule for making .o from .c
%.c : %.y ; rule for making .c from .y
% : RCS/%,v ; check out of RCS file
will, by performing transitive closure, allow dmake to infer how to
make a .o from a .y using a .c as an intermediate temporary file.
Additionally it will be able to infer how to make a .y from an RCS
file, as long as that RCS file is in the RCS directory and has a name
which ends in .y,v. The transitivity computation is performed dynami-
cally for each target that does not have a recipe. This has potential
to be costly if the %-meta rules are not carefully specified. The
.NOINFER attribute is used to mark a %-meta node as being a final tar-
get during inference. Any node with this attribute set will not be
used for subsequent inferences. As an example the node RCS/%,v is
marked as a final node since we know that if the RCS file does not
exist there likely is no other way to make it. Thus the standard
startup makefile contains an entry similar to:
.NOINFER : RCS/%,v
Thereby indicating that the RCS file is the end of the inference chain.
Whenever the inference algorithm determines that a target can be made
from more than one prerequisite and the inference chains for the two
methods are the same length the algorithm reports an ambiguity and
prints the ambiguous inference chains.
dmake tries to remove intermediate files resulting from transitive clo-
sure if the file is not marked as being PRECIOUS, or the -u flag was
not given on the command line, and if the inferred intermediate did not
previously exist. Intermediate targets that existed prior to being
made are never removed. This is in keeping with the philosophy that
dmake should never remove things from the file system that it did not
add. If the special target .REMOVE is defined and has a recipe then
dmake constructs a list of the intermediate files to be removed and
makes them prerequisites of .REMOVE. It then makes .REMOVE thereby
removing the prerequisites if the recipe of .REMOVE says to. Typically
Dmake Version 4.12 2008-02-26 42
DMAKE(1) DMAKE(1)
.REMOVE is defined in the startup file as:
.REMOVE :; $(RM) $<
AUGMAKE META RULES
As a subclass of the meta targets that is actually mapped to %-meta
rules dmake understands several SYSV AUGMAKE targets transformations.
This .<suffix> special target construct transforms into the following
%-meta rules:
.suff :; recipe
gets mapped into:
% : %.suff; recipe
dmake also supports the old format special target .<suffix>.<suffix> by
identifying any rules of this form and mapping them to the appropriate
%-rule. So for example if an old makefile contains the construct:
.c.o :; cc -c $< -o $@
dmake maps this into the following %-rule:
%.o : %.c; cc -c $< -o $@
The following SYSV AUGMAKE special targets transformation must be
enabled by providing the -A flag on the command line or by setting the
value of AUGMAKE to non-NULL. The construct
.c~.o :; recipe
gets mapped into:
%.o : s.%.c ; recipe
In general, a special target of the form .<str>~ is replaced by the
%-rule construct s.%.<str>, thereby providing support for the syntax
used by SYSV AUGMAKE for providing SCCS support. When enabled, these
mappings allow processing of existing SYSV makefiles without modifica-
tions.
MAKING TARGETS
In order to update a target dmake must execute a recipe. When a recipe
needs to be executed it is first expanded so that any macros in the
recipe text are expanded, and it is then either executed directly or
passed to a shell. dmake supports two types of recipes. The regular
recipes and group recipes.
When a regular recipe is invoked dmake executes each line of the recipe
separately using a new copy of a shell if a shell is required. Thus
effects of commands do not generally persist across recipe lines (e.g.
cd requests in a recipe line do not carry over to the next recipe
line). This is true even in environments such as MSDOS, where dmake
internally sets the current working director to match the directory it
was in before the command was executed.
The decision on whether a shell is required to execute a command is
based on the value of the macro SHELLMETAS or on the specification of
'+' or .USESHELL for the current recipe or target respectively. If any
character in the value of SHELLMETAS is found in the expanded recipe
text-line or the use of a shell is requested explicitly via '+' or
.USESHELL then the command is executed using a shell, otherwise the
Dmake Version 4.12 2008-02-26 43
DMAKE(1) DMAKE(1)
command is executed directly. The shell that is used for execution is
given by the value of the macro SHELL. The flags that are passed to
the shell are given by the value of SHELLFLAGS. Thus dmake constructs
the command line:
$(SHELL) $(SHELLFLAGS) $(expanded_recipe_command)
If the $(SHELLCMDQUOTE) macro is set its value is inserted before and
after the $(expanded_recipe_command) string.
Normally dmake writes the command line that it is about to invoke to
standard output. If the .SILENT attribute is set for the target or for
the recipe line (via @), then the recipe line is not echoed.
Group recipe processing is similar to that of regular recipes, except
that a shell is always invoked. The shell that is invoked is given by
the value of the macro GROUPSHELL, and its flags are taken from the
value of the macro GROUPFLAGS. If a target has the .PROLOG attribute
set then dmake prepends to the shell script the recipe associated with
the special target .GROUPPROLOG, and if the attribute .EPILOG is set as
well, then the recipe associated with the special target .GROUPEPILOG
is appended to the script file. This facility can be used to always
prepend a common header and common trailer to group recipes. Group
recipes are echoed to standard output just like standard recipes, but
are enclosed by lines beginning with [ and ].
The recipe flags [+,-,%,@] are recognized at the start of a recipe line
even if they appear in a macro. For example:
SH = +
all:
$(SH)echo hi
is completely equivalent to writing
SH = +
all:
+echo hi
The last step performed by dmake prior to running a recipe is to set
the macro CMNDNAME to the name of the command to execute (determined by
finding the first white-space ending token in the command line). It
then sets the macro CMNDARGS to be the remainder of the line. dmake
then expands the macro COMMAND which by default is set to
COMMAND = $(CMNDNAME) $(CMNDARGS)
The result of this final expansion is the command that will be exe-
cuted. The reason for this expansion is to allow for a different
interface to the argument passing facilities (esp. under DOS) than that
provided by dmake. You can for example define COMMAND to be
COMMAND = $(CMNDNAME) @$(mktmp $(CMNDARGS))
which dumps the arguments into a temporary file and runs the command
$(CMNDNAME) @/tmp/ASAD23043
which has a much shorter argument list. It is now up to the command to
use the supplied argument as the source for all other arguments. As an
optimization, if COMMAND is not defined dmake does not perform the
above expansion. On systems, such as UNIX, that handle long command
lines this provides a slight saving in processing the makefiles.
Dmake Version 4.12 2008-02-26 44
DMAKE(1) DMAKE(1)
MAKING LIBRARIES
Libraries are easy to maintain using dmake. A library is a file con-
taining a collection of object files. Thus to make a library you sim-
ply specify it as a target with the .LIBRARY attribute set and specify
its list of prerequisites. The prerequisites should be the object mem-
bers that are to go into the library. When dmake makes the library
target it uses the .LIBRARY attribute to pass to the prerequisites the
.LIBMEMBER attribute and the name of the library. This enables the
file binding mechanism to look for the member in the library if an
appropriate object file cannot be found. dmake now supports Elf
libraries on systems that support Elf and hence supports, on those sys-
tems, long member file names. A small example best illustrates this.
mylib.a .LIBRARY : mem1.o mem2.o mem3.o
rules for making library...
# remember to remove .o's when lib is made
# equivalent to: '%.o : %.c ; ...'
.c.o :; rules for making .o from .c say
dmake will use the .c.o rule for making the library members if appro-
priate .c files can be found using the search rules. NOTE: this is
not specific in any way to C programs, they are simply used as an exam-
ple.
dmake tries to handle the old library construct format in a sensible
way. The construct lib(member.o) is separated and the lib portion is
declared as a library target. The new target is defined with the
.LIBRARY attribute set and the member.o portion of the construct is
declared as a prerequisite of the lib target. If the construct
lib(member.o) appears as a prerequisite of a target in the makefile,
that target has the new name of the lib assigned as its prerequisite.
Thus the following example:
a.out : ml.a(a.o) ml.a(b.o); $(CC) -o $@ $<
.c.o :; $(CC) -c $(CFLAGS) -o $@ $<
%.a:
ar rv $@ $?
ranlib $@
rm -rf $?
constructs the following dependency graph.
a.out : ml.a; $(CC) -o $@ $<
ml.a .LIBRARY : a.o b.o
%.o : %.c ; $(CC) -c $(CFLAGS) -o $@ $<
%.a :
ar rv $@ $?
ranlib $@
rm -rf $?
and making a.out then works as expected.
The same thing happens for any target of the form lib((entry)). These
targets have an additional feature in that the entry target has the
.SYMBOL attribute set automatically.
NOTE: If the notion of entry points is supported by the archive and by
dmake (currently not the case) then dmake will search the archive for
the entry point and return not only the modification time of the member
which defines the entry but also the name of the member file. This
name will then replace entry and will be used for making the member
Dmake Version 4.12 2008-02-26 45
DMAKE(1) DMAKE(1)
file. Once bound to an archive member the .SYMBOL attribute is removed
from the target. This feature is presently disabled as there is little
standardization among archive formats, and we have yet to find a make-
file utilizing this feature (possibly due to the fact that it is unim-
plemented in most versions of UNIX Make).
Finally, when dmake looks for a library member it must first locate the
library file. It does so by first looking for the library relative to
the current directory and if it is not found it then looks relative to
the current value of $(TMD). This allows commonly used libraries to be
kept near the root of a source tree and to be easily found by dmake.
KEEP STATE
dmake supports the keeping of state information for targets that it
makes whenever the macro .KEEP_STATE is assigned a value. The value of
the macro should be the name of a state file that will contain the
state information. If state keeping is enabled then each target that
does not poses the .NOSTATE attribute will have a record written into
the state file indicating the target's name, the current directory, the
command used to update the target, and which, if any, :: rule is being
used. When you make this target again if any of this information does
not match the previous settings and the target is not out dated it will
still be re-made. The assumption is that one of the conditions above
has changed and that we wish to remake the target. For example, state
keeping is used in the maintenance of dmake to test compile different
versions of the source using different compilers. Changing the com-
piler causes the compilation flags to be modified and hence all sources
to be recompiled.
The state file is an ascii file and is portable, however it is not in
human readable form as the entries represent hash keys of the above
information.
The Sun Microsystem's Make construct
.KEEP_STATE :
is recognized and is mapped to .KEEP_STATE:=_state.mk. The dmake ver-
sion of state keeping does not include scanning C source files for
dependencies like Sun Make. This is specific to C programs and it was
felt that it does not belong in make. dmake instead provides the tool,
cdepend, to scan C source files and to produce depedency information.
Users are free to modify cdepend to produce other dependency files.
(NOTE: cdepend does not come with the distribution at this time, but
will be available in a patch in the near future)
MULTI PROCESSING
If the architecture supports it then dmake is capable of making a tar-
get's prerequisites in parallel. dmake will make as much in parallel
as it can and use a number of child processes up to the maximum speci-
fied by MAXPROCESS or by the value supplied to the -P command line
flag. A parallel make is enabled by setting the value of MAXPROCESS
(either directly or via -P option) to a value which is > 1. dmake
guarantees that all dependencies as specified in the makefile are hon-
ored. A target will not be made until all of its prerequisites have
been made. Note that when you specify -P 4 then four child processes
are run concurrently but dmake actually displays the fifth command it
will run immediately upon a child process becomming free. This is an
artifact of the method used to traverse the dependency graph and cannot
be removed. If a parallel make is being performed then the following
restrictions on parallelism are enforced.
1. Individual recipe lines in a non-group recipe are per-
formed sequentially in the order in which they are
Dmake Version 4.12 2008-02-26 46
DMAKE(1) DMAKE(1)
specified within the makefile and in parallel with the
recipes of other targets.
2. If a target contains multiple recipe definitions (cf. ::
rules) then these are performed sequentially in the order
in which the :: rules are specified within the makefile
and in parallel with the recipes of other targets.
3. If a target rule contains the `!' modifier, then the
recipe is performed sequentially for the list of outdated
prerequisites and in parallel with the recipes of other
targets.
4. If a target has the .SEQUENTIAL attribute set then all of
its prerequisites are made sequentially relative to one
another (as if MAXPROCESS=1), but in parallel with other
targets in the makefile.
Note: If you specify a parallel make then the order of target update
and the order in which the associated recipes are invoked will not cor-
respond to that displayed by the -n flag.
CONDITIONALS
dmake supports a makefile construct called a conditional. It allows
the user to conditionally select portions of makefile text for input
processing and to discard other portions. This becomes useful for
writing makefiles that are intended to function for more than one tar-
get host and environment. The conditional expression is specified as
follows:
.IF expression
... if text ...
.ELIF expression
... if text ...
.ELSE
... else text ...
.END
The .ELSE and .ELIF portions are optional, and the conditionals may be
nested (ie. the text may contain another conditional). .IF, .ELSE,
and .END may appear anywhere in the makefile, but a single conditional
expression may not span multiple makefiles.
expression can be one of the following forms:
String evaluation
<text> | <text> == <text> | <text> != <text>
Numeric evaluation
<text> <= <text> | <text> >= <text>
Boolean evaluation
( <text> ) | <text> || <text> | <text> && <text>
where text is either text or a macro expression. In any case, before
the comparison is made, the expression is expanded. The text portions
are then selected and compared. In the case of the numeric comparisons
enclosing quotes are removed after expanding the expressions and the
leading numerical parts are converted to an integer number. If no
numerical part is found this results to 0 (zero). The string "12ab" for
example evaluates to the number 12. Expressions can be nested with ()
and the use of || or &&. White space at the start and end of the text
portion is discarded before the comparison. This means that a macro
that evaluates to nothing but white space is considered a NULL value
Dmake Version 4.12 2008-02-26 47
DMAKE(1) DMAKE(1)
for the purpose of the comparison. In the first case the expression
evaluates TRUE if the text is not NULL otherwise it evaluates FALSE.
The remaining two cases both evaluate the expression on the basis of a
string comparison. If a macro expression needs to be equated to a NULL
string then compare it to the value of the macro $(NULL). You can use
the $(shell ...) macro to construct more complex test expressions.
EXAMPLES
# A simple example showing how to use make
#
prgm : a.o b.o
cc a.o b.o -o prgm
a.o : a.c g.h
cc a.c -o $@
b.o : b.c g.h
cc b.c -o $@
In the previous example prgm is remade only if a.o and/or b.o is out of
date with respect to prgm. These dependencies can be stated more con-
cisely by using the inference rules defined in the standard startup
file. The default rule for making .o's from .c's looks something like
this:
%.o : %.c; cc -c $(CFLAGS) -o $@ $<
Since there exists a rule (defined in the startup file) for making .o's
from .c's dmake will use that rule for manufacturing a .o from a .c and
we can specify our dependencies more concisely.
prgm : a.o b.o
cc -o prgm $<
a.o b.o : g.h
A more general way to say the above using the new macro expansions
would be:
SRC = a b
OBJ = {$(SRC)}.o
prgm : $(OBJ)
cc -o $@ $<
$(OBJ) : g.h
If we want to keep the objects in a separate directory, called objdir,
then we would write something like this.
SRC = a b
OBJ = {$(SRC)}.o
prgm : $(OBJ)
cc $< -o $@
$(OBJ) : g.h
%.o : %.c
$(CC) -c $(CFLAGS) -o $(@:f) $<
mv $(@:f) objdir
.SOURCE.o : objdir # tell dmake to look here for .o's
An example of building library members would go something like this:
(NOTE: The same rules as above will be used to produce .o's from .c's)
SRC= a b
Dmake Version 4.12 2008-02-26 48
DMAKE(1) DMAKE(1)
LIB= lib
LIBm= { $(SRC) }.o
prgm: $(LIB)
cc -o $@ $(LIB)
$(LIB) .LIBRARY : $(LIBm)
ar rv $@ $<
rm $<
Finally, suppose that each of the source files in the previous example
had the `:' character in their target name. Then we would write the
above example as:
SRC= f:a f:b
LIB= lib
LIBm= "{ $(SRC) }.o" # put quotes around each token
prgm: $(LIB)
cc -o $@ $(LIB)
$(LIB) .LIBRARY : $(LIBm)
ar rv $@ $<
rm $<
COMPATIBILITY
There are two notable differences between dmake and the standard ver-
sion of BSD UNIX 4.2/4.3 Make.
1. BSD UNIX 4.2/4.3 Make supports wild card filename expansion
for prerequisite names. Thus if a directory contains a.h,
b.h and c.h, then a line like
target: *.h
will cause UNIX make to expand the *.h into "a.h b.h c.h".
dmake does not support this type of filename expansion.
2. Unlike UNIX make, touching a library member causes dmake to
search the library for the member name and to update the
library time stamp. This is only implemented in the UNIX
version. MSDOS and other versions may not have librarians
that keep file time stamps, as a result dmake touches the
library file itself, and prints a warning.
dmake is not compatible with GNU Make. In particular it does not
understand GNU Make's macro expansions that query the file system.
dmake is fully compatible with SYSV AUGMAKE, and supports the following
AUGMAKE features:
1. GNU Make style include, and if/else/endif directives are
allowed in non-group recipes. Thus, the word include appear-
ing at the start of a line that is not part of a gruop recipe
will be mapped to the ".INCLUDE" directive that damke uses.
Similarly, the words ifeq,ifneq,elif,else, and endif are
mapped to their corresponding dmake equivalents.
2. The macro modifier expression $(macro:str=sub) is understood
and is equivalent to the expression $(macro:s/str/sub), with
the restriction that str must match the following regular
expression:
str[ |\t][ |\t]*
Dmake Version 4.12 2008-02-26 49
DMAKE(1) DMAKE(1)
(ie. str only matches at the end of a token where str is a
suffix and is terminated by a space, a tab, or end of line)
Normally sub is expanded before the substitution is made, if
you specify -A on the command line then sub is not expanded.
3. The macro % is defined to be $@ (ie. $% expands to the same
value as $@).
4. The AUGMAKE notion of libraries is handled correctly.
5. Directories are always made if you specify -A. This is con-
sistent with other UNIX versions of Make.
6. Makefiles that utilize virtual targets to force making of
other targets work as expected if AUGMAKE special target han-
dling is enabled. For example:
FRC:
myprog.o : myprog.c $(FRC) ; ...
Works as expected if you issue the command
'dmake -A FRC=FRC'
but fails with a 'don't know how to make FRC' error message
if you do not specify AUGMAKE special target handling via the
-A flag (or by setting AUGMAKE:=yes internally).
LIMITS
In some environments the length of an argument string is restricted.
(e.g. MSDOS command line arguments cannot be longer than 128 bytes if
you are using the standard command.com command interpreter as your
shell, dmake text diversions may help in these situations.)
PORTABILITY
To write makefiles that can be moved from one environment to another
requires some forethought. In particular you must define as macros all
those things that may be different in the new environment. dmake has
two facilities that help to support writing portable makefiles, recur-
sive macros and conditional expressions. The recursive macros, allow
one to define environment configurations that allow different environ-
ments for similar types of operating systems. For example the same
make script can be used for SYSV and BSD but with different macro defi-
nitions.
To write a makefile that is portable between UNIX and MSDOS requires
both features since in almost all cases you will need to define new
recipes for making targets. The recipes will probably be quite differ-
ent since the capabilities of the tools on each machine are different.
Different macros will be needed to help handle the smaller differences
in the two environments.
FILES
Makefile, makefile, startup.mk (use dmake -V to tell you where the
startup file is)
SEE ALSO
sh(1), csh(1), touch(1), f77(1), pc(1), cc(1)
S.I. Feldman Make - A Program for Maintaining Computer Programs
AUTHOR
Dennis Vadura, dvadura@wticorp.com
Many thanks to Carl Seger for his helpful suggestions, and to Trevor
John Thompson for his many excellent ideas and informative bug reports.
Dmake Version 4.12 2008-02-26 50
DMAKE(1) DMAKE(1)
Many thanks also go to those on the NET that have helped in making
dmake one of the best Make tools available.
BUGS
Some system commands return non-zero status inappropriately. Use -i
(`-' within the makefile) to overcome the difficulty.
Some systems do not have easily accessible time stamps for library mem-
bers (MSDOS, AMIGA, etc) for these dmake uses the time stamp of the
library instead and prints a warning the first time it does so. This
is almost always ok, except when multiple makefiles update a single
library file. In these instances it is possible to miss an update if
one is not careful.
This man page is way too long.
WARNINGS
Rules supported by make(1) may not work if transitive closure is turned
off (-T, .NOINFER).
PWD from csh/ksh will cause problems if a cd operation is performed and
-e or -E option is used.
Using internal macros such as COMMAND, may wreak havoc if you don't
understand their functionality.
Dmake Version 4.12 2008-02-26 51