/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "emfpcustomlinecap.hxx" #include "emfphelperdata.hxx" #include "emfpbrush.hxx" #include "emfppen.hxx" #include "emfppath.hxx" #include "emfpregion.hxx" #include "emfpimage.hxx" #include "emfpimageattributes.hxx" #include "emfpfont.hxx" #include "emfpstringformat.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include namespace emfplushelper { enum { WrapModeTile = 0x00000000, WrapModeTileFlipX = 0x00000001, WrapModeTileFlipY = 0x00000002, WrapModeTileFlipXY = 0x00000003, WrapModeClamp = 0x00000004 }; const char* emfTypeToName(sal_uInt16 type) { switch (type) { case EmfPlusRecordTypeHeader: return "EmfPlusRecordTypeHeader"; case EmfPlusRecordTypeEndOfFile: return "EmfPlusRecordTypeEndOfFile"; case EmfPlusRecordTypeComment: return "EmfPlusRecordTypeComment"; case EmfPlusRecordTypeGetDC: return "EmfPlusRecordTypeGetDC"; case EmfPlusRecordTypeObject: return "EmfPlusRecordTypeObject"; case EmfPlusRecordTypeFillRects: return "EmfPlusRecordTypeFillRects"; case EmfPlusRecordTypeDrawRects: return "EmfPlusRecordTypeDrawRects"; case EmfPlusRecordTypeFillPolygon: return "EmfPlusRecordTypeFillPolygon"; case EmfPlusRecordTypeDrawLines: return "EmfPlusRecordTypeDrawLines"; case EmfPlusRecordTypeFillClosedCurve: return "EmfPlusRecordTypeFillClosedCurve"; case EmfPlusRecordTypeDrawClosedCurve: return "EmfPlusRecordTypeDrawClosedCurve"; case EmfPlusRecordTypeDrawCurve: return "EmfPlusRecordTypeDrawCurve"; case EmfPlusRecordTypeFillEllipse: return "EmfPlusRecordTypeFillEllipse"; case EmfPlusRecordTypeDrawEllipse: return "EmfPlusRecordTypeDrawEllipse"; case EmfPlusRecordTypeFillPie: return "EmfPlusRecordTypeFillPie"; case EmfPlusRecordTypeDrawPie: return "EmfPlusRecordTypeDrawPie"; case EmfPlusRecordTypeDrawArc: return "EmfPlusRecordTypeDrawArc"; case EmfPlusRecordTypeFillRegion: return "EmfPlusRecordTypeFillRegion"; case EmfPlusRecordTypeFillPath: return "EmfPlusRecordTypeFillPath"; case EmfPlusRecordTypeDrawPath: return "EmfPlusRecordTypeDrawPath"; case EmfPlusRecordTypeDrawBeziers: return "EmfPlusRecordTypeDrawBeziers"; case EmfPlusRecordTypeDrawImage: return "EmfPlusRecordTypeDrawImage"; case EmfPlusRecordTypeDrawImagePoints: return "EmfPlusRecordTypeDrawImagePoints"; case EmfPlusRecordTypeDrawString: return "EmfPlusRecordTypeDrawString"; case EmfPlusRecordTypeSetRenderingOrigin: return "EmfPlusRecordTypeSetRenderingOrigin"; case EmfPlusRecordTypeSetAntiAliasMode: return "EmfPlusRecordTypeSetAntiAliasMode"; case EmfPlusRecordTypeSetTextRenderingHint: return "EmfPlusRecordTypeSetTextRenderingHint"; case EmfPlusRecordTypeSetTextContrast: return "EmfPlusRecordTypeSetTextContrast"; case EmfPlusRecordTypeSetInterpolationMode: return "EmfPlusRecordTypeSetInterpolationMode"; case EmfPlusRecordTypeSetPixelOffsetMode: return "EmfPlusRecordTypeSetPixelOffsetMode"; case EmfPlusRecordTypeSetCompositingQuality: return "EmfPlusRecordTypeSetCompositingQuality"; case EmfPlusRecordTypeSave: return "EmfPlusRecordTypeSave"; case EmfPlusRecordTypeRestore: return "EmfPlusRecordTypeRestore"; case EmfPlusRecordTypeBeginContainer: return "EmfPlusRecordTypeBeginContainer"; case EmfPlusRecordTypeBeginContainerNoParams: return "EmfPlusRecordTypeBeginContainerNoParams"; case EmfPlusRecordTypeEndContainer: return "EmfPlusRecordTypeEndContainer"; case EmfPlusRecordTypeSetWorldTransform: return "EmfPlusRecordTypeSetWorldTransform"; case EmfPlusRecordTypeResetWorldTransform: return "EmfPlusRecordTypeResetWorldTransform"; case EmfPlusRecordTypeMultiplyWorldTransform: return "EmfPlusRecordTypeMultiplyWorldTransform"; case EmfPlusRecordTypeTranslateWorldTransform: return "EmfPlusRecordTypeTranslateWorldTransform"; case EmfPlusRecordTypeScaleWorldTransform: return "EmfPlusRecordTypeScaleWorldTransform"; case EmfPlusRecordTypeSetPageTransform: return "EmfPlusRecordTypeSetPageTransform"; case EmfPlusRecordTypeResetClip: return "EmfPlusRecordTypeResetClip"; case EmfPlusRecordTypeSetClipRect: return "EmfPlusRecordTypeSetClipRect"; case EmfPlusRecordTypeSetClipPath: return "EmfPlusRecordTypeSetClipPath"; case EmfPlusRecordTypeSetClipRegion: return "EmfPlusRecordTypeSetClipRegion"; case EmfPlusRecordTypeOffsetClip: return "EmfPlusRecordTypeOffsetClip"; case EmfPlusRecordTypeDrawDriverString: return "EmfPlusRecordTypeDrawDriverString"; } return ""; } static OUString emfObjectToName(sal_uInt16 type) { switch (type) { case EmfPlusObjectTypeBrush: return u"EmfPlusObjectTypeBrush"_ustr; case EmfPlusObjectTypePen: return u"EmfPlusObjectTypePen"_ustr; case EmfPlusObjectTypePath: return u"EmfPlusObjectTypePath"_ustr; case EmfPlusObjectTypeRegion: return u"EmfPlusObjectTypeRegion"_ustr; case EmfPlusObjectTypeImage: return u"EmfPlusObjectTypeImage"_ustr; case EmfPlusObjectTypeFont: return u"EmfPlusObjectTypeFont"_ustr; case EmfPlusObjectTypeStringFormat: return u"EmfPlusObjectTypeStringFormat"_ustr; case EmfPlusObjectTypeImageAttributes: return u"EmfPlusObjectTypeImageAttributes"_ustr; case EmfPlusObjectTypeCustomLineCap: return u"EmfPlusObjectTypeCustomLineCap"_ustr; } return u""_ustr; } static OUString PixelOffsetModeToString(sal_uInt16 nPixelOffset) { switch (nPixelOffset) { case PixelOffsetMode::PixelOffsetModeDefault: return u"PixelOffsetModeDefault"_ustr; case PixelOffsetMode::PixelOffsetModeHighSpeed: return u"PixelOffsetModeHighSpeed"_ustr; case PixelOffsetMode::PixelOffsetModeHighQuality: return u"PixelOffsetModeHighQuality"_ustr; case PixelOffsetMode::PixelOffsetModeNone: return u"PixelOffsetModeNone"_ustr; case PixelOffsetMode::PixelOffsetModeHalf: return u"PixelOffsetModeHalf"_ustr; } return u""_ustr; } static OUString SmoothingModeToString(sal_uInt16 nSmoothMode) { switch (nSmoothMode) { case SmoothingMode::SmoothingModeDefault: return u"SmoothingModeDefault"_ustr; case SmoothingMode::SmoothingModeHighSpeed: return u"SmoothModeHighSpeed"_ustr; case SmoothingMode::SmoothingModeHighQuality: return u"SmoothingModeHighQuality"_ustr; case SmoothingMode::SmoothingModeNone: return u"SmoothingModeNone"_ustr; case SmoothingMode::SmoothingModeAntiAlias8x4: return u"SmoothingModeAntiAlias8x4"_ustr; case SmoothingMode::SmoothingModeAntiAlias8x8: return u"SmoothingModeAntiAlias8x8"_ustr; } return u""_ustr; } static OUString TextRenderingHintToString(sal_uInt16 nHint) { switch (nHint) { case TextRenderingHint::TextRenderingHintSystemDefault: return u"TextRenderingHintSystemDefault"_ustr; case TextRenderingHint::TextRenderingHintSingleBitPerPixelGridFit: return u"TextRenderingHintSingleBitPerPixelGridFit"_ustr; case TextRenderingHint::TextRenderingHintSingleBitPerPixel: return u"TextRenderingHintSingleBitPerPixel"_ustr; case TextRenderingHint::TextRenderingHintAntialiasGridFit: return u"TextRenderingHintAntialiasGridFit"_ustr; case TextRenderingHint::TextRenderingHintAntialias: return u"TextRenderingHintAntialias"_ustr; case TextRenderingHint::TextRenderingHintClearTypeGridFit: return u"TextRenderingHintClearTypeGridFit"_ustr; } return u""_ustr; } static OUString InterpolationModeToString(sal_uInt16 nMode) { switch (nMode) { case InterpolationMode::InterpolationModeDefault: return u"InterpolationModeDefault"_ustr; case InterpolationMode::InterpolationModeLowQuality: return u"InterpolationModeLowQuality"_ustr; case InterpolationMode::InterpolationModeHighQuality: return u"InterpolationModeHighQuality"_ustr; case InterpolationMode::InterpolationModeBilinear: return u"InterpolationModeBilinear"_ustr; case InterpolationMode::InterpolationModeBicubic: return u"InterpolationModeBicubic"_ustr; case InterpolationMode::InterpolationModeNearestNeighbor: return u"InterpolationModeNearestNeighbor"_ustr; case InterpolationMode::InterpolationModeHighQualityBilinear: return u"InterpolationModeHighQualityBilinear"_ustr; case InterpolationMode::InterpolationModeHighQualityBicubic: return u"InterpolationModeHighQualityBicubic"_ustr; } return u""_ustr; } OUString UnitTypeToString(sal_uInt16 nType) { switch (nType) { case UnitTypeWorld: return u"UnitTypeWorld"_ustr; case UnitTypeDisplay: return u"UnitTypeDisplay"_ustr; case UnitTypePixel: return u"UnitTypePixel"_ustr; case UnitTypePoint: return u"UnitTypePoint"_ustr; case UnitTypeInch: return u"UnitTypeInch"_ustr; case UnitTypeDocument: return u"UnitTypeDocument"_ustr; case UnitTypeMillimeter: return u"UnitTypeMillimeter"_ustr; } return u""_ustr; } static bool IsBrush(sal_uInt16 flags) { return (!((flags >> 15) & 0x0001)); } static OUString BrushIDToString(sal_uInt16 flags, sal_uInt32 brushid) { if (IsBrush(flags)) return "EmfPlusBrush ID: " + OUString::number(brushid); else return "ARGB: 0x" + OUString::number(brushid, 16); } EMFPObject::~EMFPObject() { } double EmfPlusHelperData::unitToPixel(double n, sal_uInt32 aUnitType, Direction d) { switch (static_cast(aUnitType)) { case UnitTypePixel: return n; case UnitTypePoint: return o3tl::convert(n, o3tl::Length::pt, o3tl::Length::in) * DPI(d); case UnitTypeInch: return n * DPI(d); case UnitTypeMillimeter: return o3tl::convert(n, o3tl::Length::mm, o3tl::Length::in) * DPI(d); case UnitTypeDocument: return n * DPI(d) / 300.0; case UnitTypeWorld: case UnitTypeDisplay: SAL_WARN("drawinglayer.emf", "EMF+\t Converting to World/Display."); return n; default: SAL_WARN("drawinglayer.emf", "EMF+\tTODO Unimplemented support of Unit Type: 0x" << std::hex << aUnitType); return n; } } void EmfPlusHelperData::processObjectRecord(SvMemoryStream& rObjectStream, sal_uInt16 flags, sal_uInt32 dataSize, bool bUseWholeStream) { sal_uInt16 objecttype = flags & 0x7f00; sal_uInt16 index = flags & 0xff; SAL_INFO("drawinglayer.emf", "EMF+ Object: " << emfObjectToName(objecttype) << " (0x" << objecttype << ")"); SAL_INFO("drawinglayer.emf", "EMF+\tObject slot: " << index); SAL_INFO("drawinglayer.emf", "EMF+\tFlags: " << (flags & 0xff00)); switch (objecttype) { case EmfPlusObjectTypeBrush: { EMFPBrush *brush = new EMFPBrush(); maEMFPObjects[index].reset(brush); brush->Read(rObjectStream, *this); break; } case EmfPlusObjectTypePen: { EMFPPen *pen = new EMFPPen(); maEMFPObjects[index].reset(pen); pen->Read(rObjectStream, *this); pen->penWidth = unitToPixel(pen->penWidth, pen->penUnit, Direction::horizontal); break; } case EmfPlusObjectTypePath: { sal_uInt32 aVersion, aPathPointCount, aPathPointFlags; rObjectStream.ReadUInt32(aVersion).ReadUInt32(aPathPointCount).ReadUInt32(aPathPointFlags); SAL_INFO("drawinglayer.emf", "EMF+\t\tVersion: 0x" << std::hex << aVersion); SAL_INFO("drawinglayer.emf", "EMF+\t\tNumber of points: " << std::dec << aPathPointCount); SAL_INFO("drawinglayer.emf", "EMF+\t\tPath point flags: 0x" << std::hex << aPathPointFlags << std::dec); EMFPPath *path = new EMFPPath(aPathPointCount); maEMFPObjects[index].reset(path); path->Read(rObjectStream, aPathPointFlags); break; } case EmfPlusObjectTypeRegion: { EMFPRegion *region = new EMFPRegion(); maEMFPObjects[index].reset(region); region->ReadRegion(rObjectStream, *this); break; } case EmfPlusObjectTypeImage: { EMFPImage *image = new EMFPImage; maEMFPObjects[index].reset(image); image->type = 0; image->width = 0; image->height = 0; image->stride = 0; image->pixelFormat = 0; image->Read(rObjectStream, dataSize, bUseWholeStream); break; } case EmfPlusObjectTypeFont: { EMFPFont *font = new EMFPFont; maEMFPObjects[index].reset(font); font->emSize = 0; font->sizeUnit = 0; font->fontFlags = 0; font->Read(rObjectStream); // tdf#113624 Convert unit to Pixels font->emSize = unitToPixel(font->emSize, font->sizeUnit, Direction::horizontal); break; } case EmfPlusObjectTypeStringFormat: { EMFPStringFormat *stringFormat = new EMFPStringFormat(); maEMFPObjects[index].reset(stringFormat); stringFormat->Read(rObjectStream); break; } case EmfPlusObjectTypeImageAttributes: { EMFPImageAttributes *imageAttributes = new EMFPImageAttributes(); maEMFPObjects[index].reset(imageAttributes); imageAttributes->Read(rObjectStream); break; } case EmfPlusObjectTypeCustomLineCap: { SAL_WARN("drawinglayer.emf", "EMF+\t TODO Object type 'custom line cap' not yet implemented"); break; } default: { SAL_WARN("drawinglayer.emf", "EMF+\t TODO Object unhandled flags: 0x" << std::hex << (flags & 0xff00) << std::dec); } } } void EmfPlusHelperData::ReadPoint(SvStream& s, float& x, float& y, sal_uInt32 flags) { if (flags & 0x800) { // specifies a location in the coordinate space that is relative to // the location specified by the previous element in the array. In the case of the first element in // PointData, a previous location at coordinates (0,0) is assumed. SAL_WARN("drawinglayer.emf", "EMF+\t\t TODO Relative coordinates bit detected. Implement parse EMFPlusPointR"); } if (flags & 0x4000) { sal_Int16 ix, iy; s.ReadInt16(ix).ReadInt16(iy); x = ix; y = iy; } else { s.ReadFloat(x).ReadFloat(y); } } void EmfPlusHelperData::ReadRectangle(SvStream& s, float& x, float& y, float &width, float& height, bool bCompressed) { if (bCompressed) { sal_Int16 ix, iy, iw, ih; s.ReadInt16(ix).ReadInt16(iy).ReadInt16(iw).ReadInt16(ih); x = ix; y = iy; width = iw; height = ih; } else { s.ReadFloat(x).ReadFloat(y).ReadFloat(width).ReadFloat(height); } } bool EmfPlusHelperData::readXForm(SvStream& rIn, basegfx::B2DHomMatrix& rTarget) { rTarget.identity(); if (sizeof(float) != 4) { OSL_FAIL("EnhWMFReader::sizeof( float ) != 4"); return false; } else { float eM11(0.0); float eM12(0.0); float eM21(0.0); float eM22(0.0); float eDx(0.0); float eDy(0.0); rIn.ReadFloat(eM11).ReadFloat(eM12).ReadFloat(eM21).ReadFloat(eM22).ReadFloat(eDx).ReadFloat(eDy); rTarget = basegfx::B2DHomMatrix( eM11, eM21, eDx, eM12, eM22, eDy); } return true; } void EmfPlusHelperData::mappingChanged() { if (mnPixX == 0 || mnPixY == 0) { SAL_WARN("drawinglayer.emf", "dimensions in pixels is 0"); return; } // Call when mnMmX/mnMmY/mnPixX/mnPixY/mnFrameLeft/mnFrameTop/maWorldTransform/ changes. // Currently not used are mnHDPI/mnVDPI/mnFrameRight/mnFrameBottom. *If* these should // be used in the future, this method will need to be called. // // Re-calculate maMapTransform to contain the complete former transformation so that // it can be applied by a single matrix multiplication or be added to an encapsulated // primitive later // // To evtl. correct and see where this came from, please compare with the implementations // of EmfPlusHelperData::MapToDevice and EmfPlusHelperData::Map* in prev versions maMapTransform = maWorldTransform; maMapTransform *= basegfx::utils::createScaleTranslateB2DHomMatrix(100.0 * mnMmX / mnPixX, 100.0 * mnMmY / mnPixY, double(-mnFrameLeft), double(-mnFrameTop)); maMapTransform *= maBaseTransform; // Used only for performance optimization, to do not calculate it every line draw mdExtractedXScale = std::hypot(maMapTransform.a(), maMapTransform.b()); mdExtractedYScale = std::hypot(maMapTransform.c(), maMapTransform.d()); } ::basegfx::B2DPoint EmfPlusHelperData::Map(double ix, double iy) const { // map in one step using complete MapTransform (see mappingChanged) return maMapTransform * ::basegfx::B2DPoint(ix, iy); } Color EmfPlusHelperData::EMFPGetBrushColorOrARGBColor(const sal_uInt16 flags, const sal_uInt32 brushIndexOrColor) const { Color color; if (flags & 0x8000) // we use a color { color = Color(ColorAlpha, (brushIndexOrColor >> 24), (brushIndexOrColor >> 16) & 0xff, (brushIndexOrColor >> 8) & 0xff, brushIndexOrColor & 0xff); } else // we use a brush { const EMFPBrush* brush = dynamic_cast(maEMFPObjects[brushIndexOrColor & 0xff].get()); if (brush) { color = brush->GetColor(); if (brush->type != BrushTypeSolidColor) SAL_WARN("drawinglayer.emf", "EMF+\t\t TODO Brush other than solid color is not supported"); } } return color; } void EmfPlusHelperData::GraphicStatePush(GraphicStateMap& map, sal_Int32 index) { GraphicStateMap::iterator iter = map.find( index ); if ( iter != map.end() ) { map.erase( iter ); SAL_INFO("drawinglayer.emf", "EMF+\t\tStack index: " << index << " found and erased"); } wmfemfhelper::PropertyHolder state = mrPropertyHolders.Current(); // tdf#112500 We need to save world transform somehow, during graphic state push state.setTransformation(maWorldTransform); map[ index ] = std::move(state); } void EmfPlusHelperData::GraphicStatePop(GraphicStateMap& map, sal_Int32 index) { GraphicStateMap::iterator iter = map.find(index); if (iter != map.end()) { wmfemfhelper::PropertyHolder state = iter->second; maWorldTransform = state.getTransformation(); if (state.getClipPolyPolygonActive()) { SAL_INFO("drawinglayer.emf", "EMF+\t Restore clipping region to saved in index: " << index); wmfemfhelper::HandleNewClipRegion(state.getClipPolyPolygon(), mrTargetHolders, mrPropertyHolders); } else { SAL_INFO("drawinglayer.emf", "EMF+\t Disable clipping"); wmfemfhelper::HandleNewClipRegion(::basegfx::B2DPolyPolygon(), mrTargetHolders, mrPropertyHolders); } mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t\tStack index: " << index << " found, maWorldTransform: " << maWorldTransform); } } drawinglayer::attribute::LineStartEndAttribute EmfPlusHelperData::CreateLineEnd(const sal_Int32 aCap, const float aPenWidth) const { const double pw = mdExtractedYScale * aPenWidth; if (aCap == LineCapTypeSquare) { basegfx::B2DPolygon aCapPolygon( { {-1.0, -1.0}, {1.0, -1.0}, {1.0, 1.0}, {-1.0, 1.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeRound) { basegfx::B2DPolygon aCapPolygon( { {-1.0, 1.0}, {1.0, 1.0}, {1.0, 0.0}, {0.9236, -0.3827}, {0.7071, -0.7071}, {0.3827, -0.9236}, {0.0, -1.0}, {-0.3827, -0.9236}, {-0.7071, -0.7071}, {-0.9236, -0.3827}, {-1.0, 0.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeTriangle) { basegfx::B2DPolygon aCapPolygon( { {-1.0, 1.0}, {1.0, 1.0}, {1.0, 0.0}, {0.0, -1.0}, {-1.0, 0.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeSquareAnchor) { basegfx::B2DPolygon aCapPolygon( { {-1.0, -1.0}, {1.0, -1.0}, {1.0, 1.0}, {-1.0, 1.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( 1.5 * pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeRoundAnchor) { const basegfx::B2DPolygon aCapPolygon = ::basegfx::utils::createPolygonFromEllipse(::basegfx::B2DPoint(0.0, 0.0), 1.0, 1.0); return drawinglayer::attribute::LineStartEndAttribute( 2.0 * pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeDiamondAnchor) { basegfx::B2DPolygon aCapPolygon({ {0.0, -1.0}, {1.0, 0.0}, {0.5, 0.5}, {0.5, 1.0}, {-0.5, 1.0}, {-0.5, 0.5}, {-1.0, 0.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( 2.0 * pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } else if (aCap == LineCapTypeArrowAnchor) { basegfx::B2DPolygon aCapPolygon({ {0.0, -1.0}, {1.0, 1.0}, {-1.0, 1.0} }); aCapPolygon.setClosed(true); return drawinglayer::attribute::LineStartEndAttribute( 2.0 * pw, basegfx::B2DPolyPolygon(aCapPolygon), true); } return drawinglayer::attribute::LineStartEndAttribute(); } void EmfPlusHelperData::EMFPPlusDrawPolygon(const ::basegfx::B2DPolyPolygon& polygon, sal_uInt32 penIndex) { const EMFPPen* pen = dynamic_cast(maEMFPObjects[penIndex & 0xff].get()); SAL_WARN_IF(!pen, "drawinglayer.emf", "emf+ missing pen"); if (!(pen && polygon.count())) return; const double transformedPenWidth = mdExtractedYScale * pen->penWidth; drawinglayer::attribute::LineAttribute lineAttribute( pen->GetColor().getBColor(), transformedPenWidth, pen->maLineJoin, css::drawing::LineCap_BUTT, //TODO implement PenDataDashedLineCap support here pen->fMiterMinimumAngle); drawinglayer::attribute::LineStartEndAttribute aStart; if (pen->penDataFlags & EmfPlusPenDataStartCap) { if ((pen->penDataFlags & EmfPlusPenDataCustomStartCap) && (pen->customStartCap->polygon.begin()->count() > 1)) aStart = drawinglayer::attribute::LineStartEndAttribute( pen->customStartCap->polygon.getB2DRange().getRange().getX() * mdExtractedXScale * pen->customStartCap->widthScale * pen->penWidth, pen->customStartCap->polygon, false); else aStart = EmfPlusHelperData::CreateLineEnd(pen->startCap, pen->penWidth); } drawinglayer::attribute::LineStartEndAttribute aEnd; if (pen->penDataFlags & EmfPlusPenDataEndCap) { if ((pen->penDataFlags & EmfPlusPenDataCustomEndCap) && (pen->customEndCap->polygon.begin()->count() > 1)) aEnd = drawinglayer::attribute::LineStartEndAttribute( pen->customEndCap->polygon.getB2DRange().getRange().getX() * mdExtractedXScale * pen->customEndCap->widthScale * pen->penWidth, pen->customEndCap->polygon, false); else aEnd = EmfPlusHelperData::CreateLineEnd(pen->endCap, pen->penWidth); } if (pen->GetColor().IsTransparent()) { drawinglayer::primitive2d::Primitive2DContainer aContainer; if (aStart.isDefault() && aEnd.isDefault()) aContainer.append( new drawinglayer::primitive2d::PolyPolygonStrokePrimitive2D( polygon, lineAttribute, pen->GetStrokeAttribute(mdExtractedXScale))); else { aContainer.resize(polygon.count()); for (sal_uInt32 i = 0; i < polygon.count(); i++) aContainer[i] = new drawinglayer::primitive2d::PolygonStrokeArrowPrimitive2D( polygon.getB2DPolygon(i), lineAttribute, pen->GetStrokeAttribute(mdExtractedXScale), aStart, aEnd); } mrTargetHolders.Current().append( new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D( std::move(aContainer), (255 - pen->GetColor().GetAlpha()) / 255.0)); } else { if (aStart.isDefault() && aEnd.isDefault()) mrTargetHolders.Current().append( new drawinglayer::primitive2d::PolyPolygonStrokePrimitive2D( polygon, lineAttribute, pen->GetStrokeAttribute(mdExtractedXScale))); else for (sal_uInt32 i = 0; i < polygon.count(); i++) { mrTargetHolders.Current().append( new drawinglayer::primitive2d::PolygonStrokeArrowPrimitive2D( polygon.getB2DPolygon(i), lineAttribute, pen->GetStrokeAttribute(mdExtractedXScale), aStart, aEnd)); } } mrPropertyHolders.Current().setLineColor(pen->GetColor().getBColor()); mrPropertyHolders.Current().setLineColorActive(true); mrPropertyHolders.Current().setFillColorActive(false); } void EmfPlusHelperData::EMFPPlusFillPolygonSolidColor(const ::basegfx::B2DPolyPolygon& polygon, Color const& color) { if (color.GetAlpha() == 0) return; if (!color.IsTransparent()) { // not transparent mrTargetHolders.Current().append( new drawinglayer::primitive2d::PolyPolygonColorPrimitive2D( polygon, color.getBColor())); } else { // transparent mrTargetHolders.Current().append( new drawinglayer::primitive2d::PolyPolygonRGBAPrimitive2D( polygon, color.getBColor(), (255 - color.GetAlpha()) / 255.0)); } } void EmfPlusHelperData::EMFPPlusFillPolygon(const ::basegfx::B2DPolyPolygon& polygon, const bool isColor, const sal_uInt32 brushIndexOrColor) { if (!polygon.count()) return; if (isColor) // use Color { SAL_INFO("drawinglayer.emf", "EMF+\t\t Fill polygon, ARGB color: 0x" << std::hex << brushIndexOrColor << std::dec); // EMF Alpha (1 byte): An 8-bit unsigned integer that specifies the transparency of the background, // ranging from 0 for completely transparent to 0xFF for completely opaque. const Color color(ColorAlpha, (brushIndexOrColor >> 24), (brushIndexOrColor >> 16) & 0xff, (brushIndexOrColor >> 8) & 0xff, brushIndexOrColor & 0xff); EMFPPlusFillPolygonSolidColor(polygon, color); mrPropertyHolders.Current().setFillColor(color.getBColor()); mrPropertyHolders.Current().setFillColorActive(true); mrPropertyHolders.Current().setLineColorActive(false); } else // use Brush { EMFPBrush* brush = dynamic_cast(maEMFPObjects[brushIndexOrColor & 0xff].get()); SAL_INFO("drawinglayer.emf", "EMF+\t\t Fill polygon, brush slot: " << brushIndexOrColor << " (brush type: " << (brush ? brush->GetType() : -1) << ")"); // give up in case something wrong happened if( !brush ) return; mrPropertyHolders.Current().setFillColorActive(false); mrPropertyHolders.Current().setLineColorActive(false); if (brush->type == BrushTypeSolidColor) { Color fillColor = brush->solidColor; EMFPPlusFillPolygonSolidColor(polygon, fillColor); } else if (brush->type == BrushTypeHatchFill) { // EMF+ like hatching is currently not supported. These are just color blends which serve as an approximation for some of them // for the others the hatch "background" color (secondColor in brush) is used. bool isHatchBlend = true; double blendFactor = 0.0; switch (brush->hatchStyle) { case HatchStyle05Percent: blendFactor = 0.05; break; case HatchStyle10Percent: blendFactor = 0.10; break; case HatchStyle20Percent: blendFactor = 0.20; break; case HatchStyle25Percent: blendFactor = 0.25; break; case HatchStyle30Percent: blendFactor = 0.30; break; case HatchStyle40Percent: blendFactor = 0.40; break; case HatchStyle50Percent: blendFactor = 0.50; break; case HatchStyle60Percent: blendFactor = 0.60; break; case HatchStyle70Percent: blendFactor = 0.70; break; case HatchStyle75Percent: blendFactor = 0.75; break; case HatchStyle80Percent: blendFactor = 0.80; break; case HatchStyle90Percent: blendFactor = 0.90; break; default: isHatchBlend = false; break; } Color fillColor; if (isHatchBlend) { fillColor = brush->solidColor; fillColor.Merge(brush->secondColor, static_cast(255 * blendFactor)); } else { fillColor = brush->secondColor; } // temporal solution: create a solid colored polygon // TODO create a 'real' hatching primitive mrTargetHolders.Current().append( new drawinglayer::primitive2d::PolyPolygonColorPrimitive2D( polygon, fillColor.getBColor())); } else if (brush->type == BrushTypeTextureFill) { SAL_WARN("drawinglayer.emf", "EMF+\tTODO: implement BrushTypeTextureFill brush"); } else if (brush->type == BrushTypePathGradient || brush->type == BrushTypeLinearGradient) { if (brush->type == BrushTypePathGradient && !(brush->additionalFlags & 0x1)) { SAL_WARN("drawinglayer.emf", "EMF+\t TODO Implement displaying BrushTypePathGradient with Boundary: "); } ::basegfx::B2DHomMatrix aTextureTransformation; if (brush->hasTransformation) { aTextureTransformation = brush->brush_transformation; // adjust aTextureTransformation for our world space: // -> revert the mapping -> apply the transformation -> map back basegfx::B2DHomMatrix aInvertedMapTrasform(maMapTransform); aInvertedMapTrasform.invert(); aTextureTransformation = maMapTransform * aTextureTransformation * aInvertedMapTrasform; } // select the stored colors const basegfx::BColor aStartColor = brush->solidColor.getBColor(); const basegfx::BColor aEndColor = brush->secondColor.getBColor(); drawinglayer::primitive2d::SvgGradientEntryVector aVector; if (brush->blendPositions) { SAL_INFO("drawinglayer.emf", "EMF+\t\tUse blend"); // store the blendpoints in the vector for (sal_uInt32 i = 0; i < brush->blendPoints; i++) { const double aBlendPoint = brush->blendPositions[i]; basegfx::BColor aColor; aColor.setGreen(aStartColor.getGreen() + brush->blendFactors[i] * (aEndColor.getGreen() - aStartColor.getGreen())); aColor.setBlue (aStartColor.getBlue() + brush->blendFactors[i] * (aEndColor.getBlue() - aStartColor.getBlue())); aColor.setRed (aStartColor.getRed() + brush->blendFactors[i] * (aEndColor.getRed() - aStartColor.getRed())); const double aAlpha = brush->solidColor.GetAlpha() + brush->blendFactors[i] * (brush->secondColor.GetAlpha() - brush->solidColor.GetAlpha()); aVector.emplace_back(aBlendPoint, aColor, aAlpha / 255.0); } } else if (brush->colorblendPositions) { SAL_INFO("drawinglayer.emf", "EMF+\t\tUse color blend"); // store the colorBlends in the vector for (sal_uInt32 i = 0; i < brush->colorblendPoints; i++) { const double aBlendPoint = brush->colorblendPositions[i]; const basegfx::BColor aColor = brush->colorblendColors[i].getBColor(); aVector.emplace_back(aBlendPoint, aColor, brush->colorblendColors[i].GetAlpha() / 255.0); } } else // ok, no extra points: just start and end { aVector.emplace_back(0.0, aStartColor, brush->solidColor.GetAlpha() / 255.0); aVector.emplace_back(1.0, aEndColor, brush->secondColor.GetAlpha() / 255.0); } // get the polygon range to be able to map the start/end/center point correctly // therefore, create a mapping and invert it basegfx::B2DRange aPolygonRange= polygon.getB2DRange(); basegfx::B2DHomMatrix aPolygonTransformation = basegfx::utils::createScaleTranslateB2DHomMatrix( aPolygonRange.getWidth(),aPolygonRange.getHeight(), aPolygonRange.getMinX(), aPolygonRange.getMinY()); aPolygonTransformation.invert(); if (brush->type == BrushTypeLinearGradient) { // support for public enum EmfPlusWrapMode basegfx::B2DPoint aStartPoint = Map(brush->firstPointX, 0.0); aStartPoint = aPolygonTransformation * aStartPoint; basegfx::B2DPoint aEndPoint = Map(brush->firstPointX + brush->aWidth, 0.0); aEndPoint = aPolygonTransformation * aEndPoint; // support for public enum EmfPlusWrapMode drawinglayer::primitive2d::SpreadMethod aSpreadMethod(drawinglayer::primitive2d::SpreadMethod::Pad); switch(brush->wrapMode) { case WrapModeTile: case WrapModeTileFlipY: { aSpreadMethod = drawinglayer::primitive2d::SpreadMethod::Repeat; break; } case WrapModeTileFlipX: case WrapModeTileFlipXY: { aSpreadMethod = drawinglayer::primitive2d::SpreadMethod::Reflect; break; } default: break; } // create the same one used for SVG mrTargetHolders.Current().append( new drawinglayer::primitive2d::SvgLinearGradientPrimitive2D( aTextureTransformation, polygon, std::move(aVector), aStartPoint, aEndPoint, false, // do not use UnitCoordinates aSpreadMethod)); } else // BrushTypePathGradient { // TODO The PathGradient is not implemented, and Radial Gradient is used instead basegfx::B2DPoint aCenterPoint = Map(brush->firstPointX, brush->firstPointY); aCenterPoint = aPolygonTransformation * aCenterPoint; // create the same one used for SVG mrTargetHolders.Current().append( new drawinglayer::primitive2d::SvgRadialGradientPrimitive2D( aTextureTransformation, polygon, std::move(aVector), aCenterPoint, 0.7, // relative radius little bigger to cover all elements true, // use UnitCoordinates to stretch the gradient drawinglayer::primitive2d::SpreadMethod::Pad, nullptr)); } } } } EmfPlusHelperData::EmfPlusHelperData( SvMemoryStream& rMS, wmfemfhelper::TargetHolders& rTargetHolders, wmfemfhelper::PropertyHolders& rPropertyHolders) : mfPageScale(0.0), mnOriginX(0), mnOriginY(0), mnHDPI(0), mnVDPI(0), mbSetTextContrast(false), mnTextContrast(0), mnFrameLeft(0), mnFrameTop(0), mnFrameRight(0), mnFrameBottom(0), mnPixX(0), mnPixY(0), mnMmX(0), mnMmY(0), mbMultipart(false), mMFlags(0), mdExtractedXScale(1.0), mdExtractedYScale(1.0), mrTargetHolders(rTargetHolders), mrPropertyHolders(rPropertyHolders), bIsGetDCProcessing(false) { rMS.ReadInt32(mnFrameLeft).ReadInt32(mnFrameTop).ReadInt32(mnFrameRight).ReadInt32(mnFrameBottom); SAL_INFO("drawinglayer.emf", "EMF+ picture frame: " << mnFrameLeft << "," << mnFrameTop << " - " << mnFrameRight << "," << mnFrameBottom); rMS.ReadInt32(mnPixX).ReadInt32(mnPixY).ReadInt32(mnMmX).ReadInt32(mnMmY); SAL_INFO("drawinglayer.emf", "EMF+ ref device pixel size: " << mnPixX << "x" << mnPixY << " mm size: " << mnMmX << "x" << mnMmY); readXForm(rMS, maBaseTransform); SAL_INFO("drawinglayer.emf", "EMF+ base transform: " << maBaseTransform); mappingChanged(); } EmfPlusHelperData::~EmfPlusHelperData() { } ::basegfx::B2DPolyPolygon EmfPlusHelperData::combineClip(::basegfx::B2DPolyPolygon const & leftPolygon, int combineMode, ::basegfx::B2DPolyPolygon const & rightPolygon) { basegfx::B2DPolyPolygon aClippedPolyPolygon; switch (combineMode) { case EmfPlusCombineModeReplace: { aClippedPolyPolygon = rightPolygon; break; } case EmfPlusCombineModeIntersect: { aClippedPolyPolygon = basegfx::utils::clipPolyPolygonOnPolyPolygon( leftPolygon, rightPolygon, true, false); break; } case EmfPlusCombineModeUnion: { aClippedPolyPolygon = ::basegfx::utils::solvePolygonOperationOr(leftPolygon, rightPolygon); break; } case EmfPlusCombineModeXOR: { aClippedPolyPolygon = ::basegfx::utils::solvePolygonOperationXor(leftPolygon, rightPolygon); break; } case EmfPlusCombineModeExclude: { // Replaces the existing region with the part of itself that is not in the new region. aClippedPolyPolygon = ::basegfx::utils::solvePolygonOperationDiff(leftPolygon, rightPolygon); break; } case EmfPlusCombineModeComplement: { // Replaces the existing region with the part of the new region that is not in the existing region. aClippedPolyPolygon = ::basegfx::utils::solvePolygonOperationDiff(rightPolygon, leftPolygon); break; } } return aClippedPolyPolygon; } void EmfPlusHelperData::processEmfPlusData( SvMemoryStream& rMS, const drawinglayer::geometry::ViewInformation2D& /*rViewInformation*/) { sal_uInt64 length = rMS.GetSize(); if (length < 12) SAL_WARN("drawinglayer.emf", "length is less than required header size"); // 12 is minimal valid EMF+ record size; remaining bytes are padding while (length >= 12) { sal_uInt16 type, flags; sal_uInt32 size, dataSize; sal_uInt64 next; rMS.ReadUInt16(type).ReadUInt16(flags).ReadUInt32(size).ReadUInt32(dataSize); next = rMS.Tell() + (size - 12); if (size < 12) { SAL_WARN("drawinglayer.emf", "Size field is less than 12 bytes"); break; } else if (size > length) { SAL_WARN("drawinglayer.emf", "Size field is greater than bytes left"); break; } if (dataSize > (size - 12)) { SAL_WARN("drawinglayer.emf", "DataSize field is greater than Size-12"); break; } SAL_INFO("drawinglayer.emf", "EMF+ " << emfTypeToName(type) << " (0x" << std::hex << type << ")" << std::dec); SAL_INFO("drawinglayer.emf", "EMF+\t record size: " << size); SAL_INFO("drawinglayer.emf", "EMF+\t flags: 0x" << std::hex << flags << std::dec); SAL_INFO("drawinglayer.emf", "EMF+\t data size: " << dataSize); if (bIsGetDCProcessing) { if (aGetDCState.getClipPolyPolygonActive()) { SAL_INFO("drawinglayer.emf", "EMF+\t Restore region to GetDC saved"); wmfemfhelper::HandleNewClipRegion(aGetDCState.getClipPolyPolygon(), mrTargetHolders, mrPropertyHolders); } else { SAL_INFO("drawinglayer.emf", "EMF+\t Disable clipping"); wmfemfhelper::HandleNewClipRegion(::basegfx::B2DPolyPolygon(), mrTargetHolders, mrPropertyHolders); } bIsGetDCProcessing = false; } if (type == EmfPlusRecordTypeObject && ((mbMultipart && (flags & 0x7fff) == (mMFlags & 0x7fff)) || (flags & 0x8000))) { if (!mbMultipart) { mbMultipart = true; mMFlags = flags; mMStream.Seek(0); } OSL_ENSURE(dataSize >= 4, "No room for TotalObjectSize in EmfPlusContinuedObjectRecord"); // 1st 4 bytes are TotalObjectSize mMStream.WriteBytes(static_cast(rMS.GetData()) + rMS.Tell() + 4, dataSize - 4); SAL_INFO("drawinglayer.emf", "EMF+ read next object part size: " << size << " type: " << type << " flags: " << flags << " data size: " << dataSize); } else { if (mbMultipart) { SAL_INFO("drawinglayer.emf", "EMF+ multipart record flags: " << mMFlags); mMStream.Seek(0); processObjectRecord(mMStream, mMFlags, 0, true); } mbMultipart = false; } if (type != EmfPlusRecordTypeObject || !(flags & 0x8000)) { switch (type) { case EmfPlusRecordTypeHeader: { sal_uInt32 version, emfPlusFlags; SAL_INFO("drawinglayer.emf", "EMF+\tDual: " << ((flags & 1) ? "true" : "false")); rMS.ReadUInt32(version).ReadUInt32(emfPlusFlags).ReadUInt32(mnHDPI).ReadUInt32(mnVDPI); SAL_INFO("drawinglayer.emf", "EMF+\tVersion: 0x" << std::hex << version); SAL_INFO("drawinglayer.emf", "EMF+\tEmf+ Flags: 0x" << emfPlusFlags << std::dec); SAL_INFO("drawinglayer.emf", "EMF+\tMetafile was recorded with a reference device context for " << ((emfPlusFlags & 1) ? "video display" : "printer")); SAL_INFO("drawinglayer.emf", "EMF+\tHorizontal DPI: " << mnHDPI); SAL_INFO("drawinglayer.emf", "EMF+\tVertical DPI: " << mnVDPI); break; } case EmfPlusRecordTypeEndOfFile: { break; } case EmfPlusRecordTypeComment: { #if OSL_DEBUG_LEVEL > 1 unsigned char data; OUString hexdata; SAL_INFO("drawinglayer.emf", "EMF+\tDatasize: 0x" << std::hex << dataSize << std::dec); for (sal_uInt32 i=0; i(M_PI * 2)); if (startAngle < 0.0) { startAngle += static_cast(M_PI * 2.0); } endAngle = fmodf(endAngle, static_cast(M_PI * 2.0)); if (endAngle < 0.0) { endAngle += static_cast(M_PI * 2.0); } if (sweepAngle < 0) { std::swap(endAngle, startAngle); } SAL_INFO("drawinglayer.emf", "EMF+\t Adjusted angles: start " << basegfx::rad2deg(startAngle) << ", end: " << basegfx::rad2deg(endAngle) << " startAngle: " << startAngle << " sweepAngle: " << sweepAngle); const ::basegfx::B2DPoint centerPoint(dx + 0.5 * dw, dy + 0.5 * dh); ::basegfx::B2DPolygon polygon( ::basegfx::utils::createPolygonFromEllipseSegment(centerPoint, 0.5 * dw, 0.5 * dh, startAngle, endAngle)); if (type != EmfPlusRecordTypeDrawArc) { polygon.append(centerPoint); polygon.setClosed(true); } ::basegfx::B2DPolyPolygon polyPolygon(polygon); polyPolygon.transform(maMapTransform); if (type == EmfPlusRecordTypeFillPie) EMFPPlusFillPolygon(polyPolygon, flags & 0x8000, brushIndexOrColor); else EMFPPlusDrawPolygon(polyPolygon, flags & 0xff); } break; case EmfPlusRecordTypeFillPath: { sal_uInt32 index = flags & 0xff; sal_uInt32 brushIndexOrColor; rMS.ReadUInt32(brushIndexOrColor); SAL_INFO("drawinglayer.emf", "EMF+ FillPath slot: " << index); EMFPPath* path = dynamic_cast(maEMFPObjects[index].get()); if (path) EMFPPlusFillPolygon(path->GetPolygon(*this), flags & 0x8000, brushIndexOrColor); else SAL_WARN("drawinglayer.emf", "EMF+\tEmfPlusRecordTypeFillPath missing path"); } break; case EmfPlusRecordTypeFillRegion: { sal_uInt32 index = flags & 0xff; sal_uInt32 brushIndexOrColor; rMS.ReadUInt32(brushIndexOrColor); SAL_INFO("drawinglayer.emf", "EMF+\t FillRegion slot: " << index); EMFPRegion* region = dynamic_cast(maEMFPObjects[flags & 0xff].get()); if (region) EMFPPlusFillPolygon(region->regionPolyPolygon, flags & 0x8000, brushIndexOrColor); else SAL_WARN("drawinglayer.emf", "EMF+\tEmfPlusRecordTypeFillRegion missing region"); } break; case EmfPlusRecordTypeDrawEllipse: case EmfPlusRecordTypeFillEllipse: { // Intentionally very bogus initial value to avoid MSVC complaining about potentially uninitialized local // variable. As long as the code stays as intended, this variable will be assigned a (real) value in the case // when it is later used. sal_uInt32 brushIndexOrColor = 1234567; if (type == EmfPlusRecordTypeFillEllipse) { rMS.ReadUInt32(brushIndexOrColor); } SAL_INFO("drawinglayer.emf", "EMF+\t " << (type == EmfPlusRecordTypeFillEllipse ? "Fill" : "Draw") << "Ellipse slot: " << (flags & 0xff)); float dx, dy, dw, dh; ReadRectangle(rMS, dx, dy, dw, dh, bool(flags & 0x4000)); SAL_INFO("drawinglayer.emf", "EMF+\t RectData: " << dx << "," << dy << " " << dw << "x" << dh); ::basegfx::B2DPolyPolygon polyPolygon( ::basegfx::utils::createPolygonFromEllipse(::basegfx::B2DPoint(dx + 0.5 * dw, dy + 0.5 * dh), 0.5 * dw, 0.5 * dh)); polyPolygon.transform(maMapTransform); if (type == EmfPlusRecordTypeFillEllipse) EMFPPlusFillPolygon(polyPolygon, flags & 0x8000, brushIndexOrColor); else EMFPPlusDrawPolygon(polyPolygon, flags & 0xff); } break; case EmfPlusRecordTypeFillRects: case EmfPlusRecordTypeDrawRects: { // Silent MSVC warning C4701: potentially uninitialized local variable 'brushIndexOrColor' used sal_uInt32 brushIndexOrColor = 999; ::basegfx::B2DPolyPolygon polyPolygon; sal_uInt32 rectangles; float x, y, width, height; const bool isColor = (flags & 0x8000); ::basegfx::B2DPolygon polygon; if (EmfPlusRecordTypeFillRects == type) { SAL_INFO("drawinglayer.emf", "EMF+\t FillRects"); rMS.ReadUInt32(brushIndexOrColor); SAL_INFO("drawinglayer.emf", "EMF+\t" << (isColor ? "color" : "brush index") << ": 0x" << std::hex << brushIndexOrColor << std::dec); } else { SAL_INFO("drawinglayer.emf", "EMF+\t DrawRects"); } rMS.ReadUInt32(rectangles); for (sal_uInt32 i = 0; i < rectangles; i++) { ReadRectangle(rMS, x, y, width, height, bool(flags & 0x4000)); polygon.clear(); polygon.append(Map(x, y)); polygon.append(Map(x + width, y)); polygon.append(Map(x + width, y + height)); polygon.append(Map(x, y + height)); polygon.setClosed(true); SAL_INFO("drawinglayer.emf", "EMF+\t\t rectangle: " << x << ", "<< y << " " << width << "x" << height); polyPolygon.append(polygon); } if (type == EmfPlusRecordTypeFillRects) EMFPPlusFillPolygon(polyPolygon, isColor, brushIndexOrColor); else EMFPPlusDrawPolygon(polyPolygon, flags & 0xff); break; } case EmfPlusRecordTypeFillPolygon: { sal_uInt32 brushIndexOrColor, points; rMS.ReadUInt32(brushIndexOrColor); rMS.ReadUInt32(points); SAL_INFO("drawinglayer.emf", "EMF+\t Points: " << points); SAL_INFO("drawinglayer.emf", "EMF+\t " << ((flags & 0x8000) ? "Color" : "Brush index") << " : 0x" << std::hex << brushIndexOrColor << std::dec); EMFPPath path(points, true); path.Read(rMS, flags); EMFPPlusFillPolygon(path.GetPolygon(*this), flags & 0x8000, brushIndexOrColor); break; } case EmfPlusRecordTypeDrawLines: { sal_uInt32 points; rMS.ReadUInt32(points); SAL_INFO("drawinglayer.emf", "EMF+\t Points: " << points); EMFPPath path(points, true); path.Read(rMS, flags); // 0x2000 bit indicates whether to draw an extra line between the last point // and the first point, to close the shape. EMFPPlusDrawPolygon(path.GetPolygon(*this, true, (flags & 0x2000)), flags); break; } case EmfPlusRecordTypeDrawPath: { sal_uInt32 penIndex; rMS.ReadUInt32(penIndex); SAL_INFO("drawinglayer.emf", "EMF+\t Pen: " << penIndex); EMFPPath* path = dynamic_cast(maEMFPObjects[flags & 0xff].get()); if (path) EMFPPlusDrawPolygon(path->GetPolygon(*this), penIndex); else SAL_WARN("drawinglayer.emf", "\t\tEmfPlusRecordTypeDrawPath missing path"); break; } case EmfPlusRecordTypeDrawBeziers: { sal_uInt32 aCount; float x1, y1, x2, y2, x3, y3, x4, y4; ::basegfx::B2DPolygon aPolygon; rMS.ReadUInt32(aCount); SAL_INFO("drawinglayer.emf", "EMF+\t DrawBeziers slot: " << (flags & 0xff)); SAL_INFO("drawinglayer.emf", "EMF+\t Number of points: " << aCount); SAL_WARN_IF((aCount - 1) % 3 != 0, "drawinglayer.emf", "EMF+\t Bezier Draw not support number of points other than 4, 7, " "10, 13, 16..."); if (aCount < 4) { SAL_WARN("drawinglayer.emf", "EMF+\t Bezier Draw does not support less " "than 4 points. Number of points: " << aCount); break; } ReadPoint(rMS, x1, y1, flags); // We need to add first starting point aPolygon.append(Map(x1, y1)); SAL_INFO("drawinglayer.emf", "EMF+\t Bezier starting point: " << x1 << "," << y1); for (sal_uInt32 i = 4; i <= aCount; i += 3) { ReadPoint(rMS, x2, y2, flags); ReadPoint(rMS, x3, y3, flags); ReadPoint(rMS, x4, y4, flags); SAL_INFO("drawinglayer.emf", "EMF+\t Bezier points: " << x2 << "," << y2 << " " << x3 << "," << y3 << " " << x4 << "," << y4); aPolygon.appendBezierSegment(Map(x2, y2), Map(x3, y3), Map(x4, y4)); } EMFPPlusDrawPolygon(::basegfx::B2DPolyPolygon(aPolygon), flags & 0xff); break; } case EmfPlusRecordTypeDrawCurve: { sal_uInt32 aOffset, aNumSegments, points; float aTension; rMS.ReadFloat(aTension); rMS.ReadUInt32(aOffset); rMS.ReadUInt32(aNumSegments); rMS.ReadUInt32(points); SAL_WARN("drawinglayer.emf", "EMF+\t Tension: " << aTension << " Offset: " << aOffset << " NumSegments: " << aNumSegments << " Points: " << points); EMFPPath path(points, true); path.Read(rMS, flags); if (points >= 2) EMFPPlusDrawPolygon( path.GetCardinalSpline(*this, aTension, aOffset, aNumSegments), flags & 0xff); else SAL_WARN("drawinglayer.emf", "Not enough number of points"); break; } case EmfPlusRecordTypeDrawClosedCurve: case EmfPlusRecordTypeFillClosedCurve: { // Silent MSVC warning C4701: potentially uninitialized local variable 'brushIndexOrColor' used sal_uInt32 brushIndexOrColor = 999, points; float aTension; if (type == EmfPlusRecordTypeFillClosedCurve) { rMS.ReadUInt32(brushIndexOrColor); SAL_INFO( "drawinglayer.emf", "EMF+\t Fill Mode: " << (flags & 0x2000 ? "Winding" : "Alternate")); } rMS.ReadFloat(aTension); rMS.ReadUInt32(points); SAL_WARN("drawinglayer.emf", "EMF+\t Tension: " << aTension << " Points: " << points); SAL_INFO("drawinglayer.emf", "EMF+\t " << (flags & 0x8000 ? "Color" : "Brush index") << " : 0x" << std::hex << brushIndexOrColor << std::dec); if (points < 3) { SAL_WARN("drawinglayer.emf", "Not enough number of points"); break; } EMFPPath path(points, true); path.Read(rMS, flags); if (type == EmfPlusRecordTypeFillClosedCurve) EMFPPlusFillPolygon(path.GetClosedCardinalSpline(*this, aTension), flags & 0x8000, brushIndexOrColor); else EMFPPlusDrawPolygon(path.GetClosedCardinalSpline(*this, aTension), flags & 0xff); break; } case EmfPlusRecordTypeDrawImage: case EmfPlusRecordTypeDrawImagePoints: { sal_uInt32 imageAttributesId; sal_Int32 sourceUnit; rMS.ReadUInt32(imageAttributesId).ReadInt32(sourceUnit); SAL_INFO("drawinglayer.emf", "EMF+\t " << (type == EmfPlusRecordTypeDrawImage ? "DrawImage" : "DrawImagePoints") << " image attributes Id: " << imageAttributesId << " source unit: " << sourceUnit); SAL_INFO("drawinglayer.emf", "EMF+\t TODO: use image attributes"); // Source unit of measurement type must be 1 pixel if (EMFPImage* image = sourceUnit == UnitTypePixel ? dynamic_cast(maEMFPObjects[flags & 0xff].get()) : nullptr) { float sx, sy, sw, sh; ReadRectangle(rMS, sx, sy, sw, sh); ::tools::Rectangle aSource(Point(sx, sy), Size(sw + 1, sh + 1)); SAL_INFO("drawinglayer.emf", "EMF+\t " << (type == EmfPlusRecordTypeDrawImage ? "DrawImage" : "DrawImagePoints") << " source rectangle: " << sx << "," << sy << " " << sw << "x" << sh); float dx(0.), dy(0.), dw(0.), dh(0.); double fShearX = 0.0; double fShearY = 0.0; if (type == EmfPlusRecordTypeDrawImagePoints) { sal_uInt32 aCount; rMS.ReadUInt32(aCount); // Number of points used by DrawImagePoints. Exactly 3 points must be specified. if (aCount != 3) { SAL_WARN("drawinglayer.emf", "EMF+\t Wrong EMF+ file. Expected " "3 points, received: " << aCount); break; } float x1, y1, x2, y2, x3, y3; ReadPoint(rMS, x1, y1, flags); // upper-left point ReadPoint(rMS, x2, y2, flags); // upper-right ReadPoint(rMS, x3, y3, flags); // lower-left SAL_INFO("drawinglayer.emf", "EMF+\t destination points: " << x1 << "," << y1 << " " << x2 << "," << y2 << " " << x3 << "," << y3); dx = x1; dy = y2; dw = x2 - x1; dh = y3 - y1; fShearX = x3 - x1; fShearY = y2 - y1; } else if (type == EmfPlusRecordTypeDrawImage) ReadRectangle(rMS, dx, dy, dw, dh, bool(flags & 0x4000)); SAL_INFO("drawinglayer.emf", "EMF+\t Rectangle: " << dx << "," << dy << " " << dw << "x" << dh); Size aSize; if (image->type == ImageDataTypeBitmap) { aSize = image->graphic.GetBitmapEx().GetSizePixel(); SAL_INFO("drawinglayer.emf", "EMF+\t Bitmap size: " << aSize.Width() << "x" << aSize.Height()); if (sx < 0) { // If src position is negative then we need shift image to right dx = dx + ((-sx) / sw) * dw; if (sx + sw <= aSize.Width()) dw = ((sw + sx) / sw) * dw; else dw = (aSize.Width() / sw) * dw; } else if (sx + sw > aSize.Width()) // If the src image is smaller that what we want to cut, then we need to scale down dw = ((aSize.Width() - sx) / sw) * dw; if (sy < 0) { dy = dy + ((-sy) / sh) * dh; if (sy + sh <= aSize.Height()) dh = ((sh + sy) / sh) * dh; else dh = (aSize.Height() / sh) * dh; } else if (sy + sh > aSize.Height()) dh = ((aSize.Height() - sy) / sh) * dh; } else SAL_INFO( "drawinglayer.emf", "EMF+\t TODO: Add support for SrcRect to ImageDataTypeMetafile"); const ::basegfx::B2DPoint aDstPoint(dx, dy); const ::basegfx::B2DSize aDstSize(dw, dh); const basegfx::B2DHomMatrix aTransformMatrix = maMapTransform * basegfx::B2DHomMatrix( /* Row 0, Column 0 */ aDstSize.getWidth(), /* Row 0, Column 1 */ fShearX, /* Row 0, Column 2 */ aDstPoint.getX(), /* Row 1, Column 0 */ fShearY, /* Row 1, Column 1 */ aDstSize.getHeight(), /* Row 1, Column 2 */ aDstPoint.getY()); if (image->type == ImageDataTypeBitmap) { BitmapEx aBmp(image->graphic.GetBitmapEx()); aBmp.Crop(aSource); aSize = aBmp.GetSizePixel(); if (aSize.Width() > 0 && aSize.Height() > 0) { mrTargetHolders.Current().append( new drawinglayer::primitive2d::BitmapPrimitive2D( aBmp, aTransformMatrix)); } else SAL_WARN("drawinglayer.emf", "EMF+\t warning: empty bitmap"); } else if (image->type == ImageDataTypeMetafile) { GDIMetaFile aGDI(image->graphic.GetGDIMetaFile()); aGDI.Clip(aSource); mrTargetHolders.Current().append( new drawinglayer::primitive2d::MetafilePrimitive2D(aTransformMatrix, aGDI)); } } else { SAL_WARN("drawinglayer.emf", "EMF+\tDrawImage(Points) Wrong EMF+ file. Only Unit Type Pixel is " "support by EMF+ specification for DrawImage(Points)"); } break; } case EmfPlusRecordTypeDrawString: { sal_uInt32 brushId, formatId, stringLength; rMS.ReadUInt32(brushId).ReadUInt32(formatId).ReadUInt32(stringLength); SAL_INFO("drawinglayer.emf", "EMF+\t FontId: " << OUString::number(flags & 0xFF)); SAL_INFO("drawinglayer.emf", "EMF+\t BrushId: " << BrushIDToString(flags, brushId)); SAL_INFO("drawinglayer.emf", "EMF+\t FormatId: " << formatId); SAL_INFO("drawinglayer.emf", "EMF+\t Length: " << stringLength); // read the layout rectangle float lx, ly, lw, lh; rMS.ReadFloat(lx).ReadFloat(ly).ReadFloat(lw).ReadFloat(lh); SAL_INFO("drawinglayer.emf", "EMF+\t DrawString layoutRect: " << lx << "," << ly << " - " << lw << "x" << lh); // parse the string const OUString text = read_uInt16s_ToOUString(rMS, stringLength); SAL_INFO("drawinglayer.emf", "EMF+\t DrawString string: " << text); // get the stringFormat from the Object table ( this is OPTIONAL and may be nullptr ) const EMFPStringFormat *stringFormat = dynamic_cast(maEMFPObjects[formatId & 0xff].get()); // get the font from the flags const EMFPFont *font = dynamic_cast(maEMFPObjects[flags & 0xff].get()); if (!font) { break; } mrPropertyHolders.Current().setFont(vcl::Font(font->family, Size(font->emSize, font->emSize))); drawinglayer::attribute::FontAttribute fontAttribute( font->family, // font family u""_ustr, // (no) font style font->Bold() ? 8u : 1u, // weight: 8 = bold font->family == "SYMBOL", // symbol stringFormat && stringFormat->DirectionVertical(), // vertical font->Italic(), // italic false, // monospaced false, // outline = false, no such thing in MS-EMFPLUS stringFormat && stringFormat->DirectionRightToLeft(), // right-to-left false); // BiDiStrong css::lang::Locale locale; double stringAlignmentHorizontalOffset = 0.0; double stringAlignmentVerticalOffset = font->emSize; if (stringFormat) { LanguageTag aLanguageTag(static_cast(stringFormat->language)); locale = aLanguageTag.getLocale(); drawinglayer::primitive2d::TextLayouterDevice aTextLayouter; aTextLayouter.setFontAttribute(fontAttribute, font->emSize, font->emSize, locale); double fTextWidth = aTextLayouter.getTextWidth(text, 0, stringLength); SAL_WARN_IF(stringFormat->DirectionRightToLeft(), "drawinglayer.emf", "EMF+\t DrawString Alignment TODO For a right-to-left layout rectangle, the origin should be at the upper right."); if (stringFormat->stringAlignment == StringAlignmentNear) // Alignment is to the left side of the layout rectangle (lx, ly, lw, lh) stringAlignmentHorizontalOffset = stringFormat->leadingMargin * font->emSize; else if (stringFormat->stringAlignment == StringAlignmentCenter) // Alignment is centered between the origin and extent of the layout rectangle stringAlignmentHorizontalOffset = 0.5 * lw + (stringFormat->leadingMargin - stringFormat->trailingMargin) * font->emSize - 0.5 * fTextWidth; else if (stringFormat->stringAlignment == StringAlignmentFar) // Alignment is to the right side of the layout rectangle stringAlignmentHorizontalOffset = lw - stringFormat->trailingMargin * font->emSize - fTextWidth; if (stringFormat->lineAlign == StringAlignmentNear) stringAlignmentVerticalOffset = font->emSize; else if (stringFormat->lineAlign == StringAlignmentCenter) stringAlignmentVerticalOffset = 0.5 * lh + 0.5 * font->emSize; else if (stringFormat->lineAlign == StringAlignmentFar) stringAlignmentVerticalOffset = lh; } else { // By default LeadingMargin is 1/6 inch // TODO for typographic fonts set value to 0. stringAlignmentHorizontalOffset = 16.0; // use system default locale = Application::GetSettings().GetLanguageTag().getLocale(); } const basegfx::B2DHomMatrix transformMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix( ::basegfx::B2DVector(font->emSize, font->emSize), ::basegfx::B2DPoint(lx + stringAlignmentHorizontalOffset, ly + stringAlignmentVerticalOffset)); Color uncorrectedColor = EMFPGetBrushColorOrARGBColor(flags, brushId); Color color; if (mbSetTextContrast) { const auto gammaVal = mnTextContrast / 1000; const basegfx::BColorModifier_gamma gamma(gammaVal); // gamma correct transparency color sal_uInt16 alpha = uncorrectedColor.GetAlpha(); alpha = std::clamp(std::pow(alpha, 1.0 / gammaVal), 0.0, 1.0) * 255; basegfx::BColor modifiedColor(gamma.getModifiedColor(uncorrectedColor.getBColor())); color.SetRed(modifiedColor.getRed() * 255); color.SetGreen(modifiedColor.getGreen() * 255); color.SetBlue(modifiedColor.getBlue() * 255); color.SetAlpha(alpha); } else { color = uncorrectedColor; } mrPropertyHolders.Current().setTextColor(color.getBColor()); mrPropertyHolders.Current().setTextColorActive(true); if (color.GetAlpha() > 0) { std::vector emptyVector; rtl::Reference pBaseText; if (font->Underline() || font->Strikeout()) { pBaseText = new drawinglayer::primitive2d::TextDecoratedPortionPrimitive2D( transformMatrix, text, 0, // text always starts at 0 stringLength, std::move(emptyVector), // EMF-PLUS has no DX-array {}, std::move(fontAttribute), locale, color.getBColor(), // Font Color COL_TRANSPARENT, // Fill Color color.getBColor(), // OverlineColor color.getBColor(), // TextlineColor drawinglayer::primitive2d::TEXT_LINE_NONE, font->Underline() ? drawinglayer::primitive2d::TEXT_LINE_SINGLE : drawinglayer::primitive2d::TEXT_LINE_NONE, false, font->Strikeout() ? drawinglayer::primitive2d::TEXT_STRIKEOUT_SINGLE : drawinglayer::primitive2d::TEXT_STRIKEOUT_NONE); } else { pBaseText = new drawinglayer::primitive2d::TextSimplePortionPrimitive2D( transformMatrix, text, 0, // text always starts at 0 stringLength, std::move(emptyVector), // EMF-PLUS has no DX-array {}, std::move(fontAttribute), std::move(locale), color.getBColor()); } drawinglayer::primitive2d::Primitive2DReference aPrimitiveText(pBaseText); if (color.IsTransparent()) { aPrimitiveText = new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D( drawinglayer::primitive2d::Primitive2DContainer { aPrimitiveText }, (255 - color.GetAlpha()) / 255.0); } mrTargetHolders.Current().append( new drawinglayer::primitive2d::TransformPrimitive2D( maMapTransform, drawinglayer::primitive2d::Primitive2DContainer { aPrimitiveText } )); } break; } case EmfPlusRecordTypeSetPageTransform: { rMS.ReadFloat(mfPageScale); SAL_INFO("drawinglayer.emf", "EMF+\t Scale: " << mfPageScale << " unit: " << UnitTypeToString(flags)); if ((flags == UnitTypeDisplay) || (flags == UnitTypeWorld)) { SAL_WARN("drawinglayer.emf", "EMF+\t file error. UnitTypeDisplay and UnitTypeWorld are not supported by SetPageTransform in EMF+ specification."); } else { mnMmX = std::round(unitToPixel(static_cast(mnMmX) * mfPageScale, flags, Direction::horizontal)); mnMmY = std::round(unitToPixel(static_cast(mnMmY) * mfPageScale, flags, Direction::vertical)); mappingChanged(); } break; } case EmfPlusRecordTypeSetRenderingOrigin: { rMS.ReadInt32(mnOriginX).ReadInt32(mnOriginY); SAL_INFO("drawinglayer.emf", "EMF+\t SetRenderingOrigin, [x,y]: " << mnOriginX << "," << mnOriginY); break; } case EmfPlusRecordTypeSetTextContrast: { const sal_uInt16 LOWERGAMMA = 1000; const sal_uInt16 UPPERGAMMA = 2200; mbSetTextContrast = true; mnTextContrast = flags & 0xFFF; SAL_WARN_IF(mnTextContrast > UPPERGAMMA || mnTextContrast < LOWERGAMMA, "drawinglayer.emf", "EMF+\t Gamma value is not with bounds 1000 to 2200, value is " << mnTextContrast); mnTextContrast = std::min(mnTextContrast, UPPERGAMMA); mnTextContrast = std::max(mnTextContrast, LOWERGAMMA); SAL_INFO("drawinglayer.emf", "EMF+\t Text contrast: " << (mnTextContrast / 1000) << " gamma"); break; } case EmfPlusRecordTypeSetTextRenderingHint: { sal_uInt8 nTextRenderingHint = (flags & 0xFF) >> 1; SAL_INFO("drawinglayer.emf", "EMF+\t Text rendering hint: " << TextRenderingHintToString(nTextRenderingHint)); SAL_WARN("drawinglayer.emf", "EMF+\t TODO SetTextRenderingHint"); break; } case EmfPlusRecordTypeSetAntiAliasMode: { bool bUseAntiAlias = (flags & 0x0001); sal_uInt8 nSmoothingMode = (flags & 0xFE00) >> 1; SAL_INFO("drawinglayer.emf", "EMF+\t Antialiasing: " << (bUseAntiAlias ? "enabled" : "disabled")); SAL_INFO("drawinglayer.emf", "EMF+\t Smoothing mode: " << SmoothingModeToString(nSmoothingMode)); SAL_WARN("drawinglayer.emf", "EMF+\t TODO SetAntiAliasMode"); break; } case EmfPlusRecordTypeSetInterpolationMode: { sal_uInt16 nInterpolationMode = flags & 0xFF; SAL_INFO("drawinglayer.emf", "EMF+\t Interpolation mode: " << InterpolationModeToString(nInterpolationMode)); SAL_WARN("drawinglayer.emf", "EMF+\t TODO InterpolationMode"); break; } case EmfPlusRecordTypeSetPixelOffsetMode: { SAL_INFO("drawinglayer.emf", "EMF+\t Pixel offset mode: " << PixelOffsetModeToString(flags)); SAL_WARN("drawinglayer.emf", "EMF+\t TODO SetPixelOffsetMode"); break; } case EmfPlusRecordTypeSetCompositingQuality: { SAL_INFO("drawinglayer.emf", "EMF+\t TODO SetCompositingQuality"); break; } case EmfPlusRecordTypeSave: { sal_uInt32 stackIndex; rMS.ReadUInt32(stackIndex); SAL_INFO("drawinglayer.emf", "EMF+\t Save stack index: " << stackIndex); GraphicStatePush(mGSStack, stackIndex); break; } case EmfPlusRecordTypeRestore: { sal_uInt32 stackIndex; rMS.ReadUInt32(stackIndex); SAL_INFO("drawinglayer.emf", "EMF+\t Restore stack index: " << stackIndex); GraphicStatePop(mGSStack, stackIndex); break; } case EmfPlusRecordTypeBeginContainer: { float dx, dy, dw, dh; ReadRectangle(rMS, dx, dy, dw, dh); SAL_INFO("drawinglayer.emf", "EMF+\t Dest RectData: " << dx << "," << dy << " " << dw << "x" << dh); float sx, sy, sw, sh; ReadRectangle(rMS, sx, sy, sw, sh); SAL_INFO("drawinglayer.emf", "EMF+\t Source RectData: " << sx << "," << sy << " " << sw << "x" << sh); sal_uInt32 stackIndex; rMS.ReadUInt32(stackIndex); SAL_INFO("drawinglayer.emf", "EMF+\t Begin Container stack index: " << stackIndex << ", PageUnit: " << flags); if ((flags == UnitTypeDisplay) || (flags == UnitTypeWorld)) { SAL_WARN("drawinglayer.emf", "EMF+\t file error. UnitTypeDisplay and UnitTypeWorld are not supported by BeginContainer in EMF+ specification."); break; } GraphicStatePush(mGSContainerStack, stackIndex); const basegfx::B2DHomMatrix transform = basegfx::utils::createScaleTranslateB2DHomMatrix( unitToPixel(static_cast(dw) / sw, flags, Direction::horizontal), unitToPixel(static_cast(dh) / sh, flags, Direction::vertical), unitToPixel(static_cast(dx) - sx, flags, Direction::horizontal), unitToPixel(static_cast(dy) - sy, flags, Direction::vertical)); maWorldTransform *= transform; mappingChanged(); break; } case EmfPlusRecordTypeBeginContainerNoParams: { sal_uInt32 stackIndex; rMS.ReadUInt32(stackIndex); SAL_INFO("drawinglayer.emf", "EMF+\t Begin Container No Params stack index: " << stackIndex); GraphicStatePush(mGSContainerStack, stackIndex); break; } case EmfPlusRecordTypeEndContainer: { sal_uInt32 stackIndex; rMS.ReadUInt32(stackIndex); SAL_INFO("drawinglayer.emf", "EMF+\t End Container stack index: " << stackIndex); GraphicStatePop(mGSContainerStack, stackIndex); break; } case EmfPlusRecordTypeSetWorldTransform: { SAL_INFO("drawinglayer.emf", "EMF+\t SetWorldTransform, Post multiply: " << bool(flags & 0x2000)); readXForm(rMS, maWorldTransform); mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t\t: " << maWorldTransform); break; } case EmfPlusRecordTypeResetWorldTransform: { maWorldTransform.identity(); SAL_INFO("drawinglayer.emf", "EMF+\t World transform: " << maWorldTransform); mappingChanged(); break; } case EmfPlusRecordTypeMultiplyWorldTransform: { SAL_INFO("drawinglayer.emf", "EMF+\t MultiplyWorldTransform, post multiply: " << bool(flags & 0x2000)); basegfx::B2DHomMatrix transform; readXForm(rMS, transform); SAL_INFO("drawinglayer.emf", "EMF+\t Transform matrix: " << transform); if (flags & 0x2000) { // post multiply maWorldTransform *= transform; } else { // pre multiply transform *= maWorldTransform; maWorldTransform = transform; } mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t World transform matrix: " << maWorldTransform); break; } case EmfPlusRecordTypeTranslateWorldTransform: { SAL_INFO("drawinglayer.emf", "EMF+\t TranslateWorldTransform, Post multiply: " << bool(flags & 0x2000)); basegfx::B2DHomMatrix transform; float eDx, eDy; rMS.ReadFloat(eDx).ReadFloat(eDy); transform.set(0, 2, eDx); transform.set(1, 2, eDy); SAL_INFO("drawinglayer.emf", "EMF+\t Translate matrix: " << transform); if (flags & 0x2000) { // post multiply maWorldTransform *= transform; } else { // pre multiply transform *= maWorldTransform; maWorldTransform = transform; } mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t World transform matrix: " << maWorldTransform); break; } case EmfPlusRecordTypeScaleWorldTransform: { basegfx::B2DHomMatrix transform; float eSx, eSy; rMS.ReadFloat(eSx).ReadFloat(eSy); transform.set(0, 0, eSx); transform.set(1, 1, eSy); SAL_INFO("drawinglayer.emf", "EMF+\t ScaleWorldTransform Sx: " << eSx << " Sy: " << eSy << ", Post multiply:" << bool(flags & 0x2000)); SAL_INFO("drawinglayer.emf", "EMF+\t World transform matrix: " << maWorldTransform); if (flags & 0x2000) { // post multiply maWorldTransform *= transform; } else { // pre multiply transform *= maWorldTransform; maWorldTransform = transform; } mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t World transform matrix: " << maWorldTransform); break; } case EmfPlusRecordTypeRotateWorldTransform: { // Angle of rotation in degrees float eAngle; rMS.ReadFloat(eAngle); SAL_INFO("drawinglayer.emf", "EMF+\t RotateWorldTransform Angle: " << eAngle << ", post multiply: " << bool(flags & 0x2000)); // Skipping flags & 0x2000 // For rotation transformation there is no difference between post and pre multiply maWorldTransform.rotate(basegfx::deg2rad(eAngle)); mappingChanged(); SAL_INFO("drawinglayer.emf", "EMF+\t " << maWorldTransform); break; } case EmfPlusRecordTypeResetClip: { SAL_INFO("drawinglayer.emf", "EMF+ ResetClip"); // We don't need to read anything more, as Size needs to be set 0x0000000C // and DataSize must be set to 0. // Resets the current clipping region for the world space to infinity. HandleNewClipRegion(::basegfx::B2DPolyPolygon(), mrTargetHolders, mrPropertyHolders); break; } case EmfPlusRecordTypeSetClipRect: case EmfPlusRecordTypeSetClipPath: case EmfPlusRecordTypeSetClipRegion: { int combineMode = (flags >> 8) & 0xf; ::basegfx::B2DPolyPolygon polyPolygon; if (type == EmfPlusRecordTypeSetClipRect) { SAL_INFO("drawinglayer.emf", "EMF+\t SetClipRect"); float dx, dy, dw, dh; ReadRectangle(rMS, dx, dy, dw, dh); SAL_INFO("drawinglayer.emf", "EMF+\t RectData: " << dx << "," << dy << " " << dw << "x" << dh); ::basegfx::B2DPoint mappedPoint1(Map(dx, dy)); ::basegfx::B2DPoint mappedPoint2(Map(dx + dw, dy + dh)); polyPolygon = ::basegfx::B2DPolyPolygon(::basegfx::utils::createPolygonFromRect( ::basegfx::B2DRectangle(mappedPoint1.getX(), mappedPoint1.getY(), mappedPoint2.getX(), mappedPoint2.getY()))); } else if (type == EmfPlusRecordTypeSetClipPath) { SAL_INFO("drawinglayer.emf", "EMF+\tSetClipPath " << (flags & 0xff)); EMFPPath* path = dynamic_cast(maEMFPObjects[flags & 0xff].get()); if (!path) { SAL_WARN("drawinglayer.emf", "EMF+\t TODO Unable to find path in slot: " << (flags & 0xff)); break; } polyPolygon = path->GetPolygon(*this); } else if (type == EmfPlusRecordTypeSetClipRegion) { SAL_INFO("drawinglayer.emf", "EMF+\t Region in slot: " << (flags & 0xff)); EMFPRegion* region = dynamic_cast(maEMFPObjects[flags & 0xff].get()); if (!region) { SAL_WARN( "drawinglayer.emf", "EMF+\t TODO Unable to find region in slot: " << (flags & 0xff)); break; } polyPolygon = region->regionPolyPolygon; } SAL_INFO("drawinglayer.emf", "EMF+\t Combine mode: " << combineMode); ::basegfx::B2DPolyPolygon aClippedPolyPolygon; if (mrPropertyHolders.Current().getClipPolyPolygonActive()) { aClippedPolyPolygon = combineClip(mrPropertyHolders.Current().getClipPolyPolygon(), combineMode, polyPolygon); } else { //Combine with infinity switch (combineMode) { case EmfPlusCombineModeReplace: case EmfPlusCombineModeIntersect: { aClippedPolyPolygon = polyPolygon; break; } case EmfPlusCombineModeUnion: { // Disable clipping as the clipping is infinity aClippedPolyPolygon = ::basegfx::B2DPolyPolygon(); break; } case EmfPlusCombineModeXOR: case EmfPlusCombineModeComplement: { //TODO It is not correct and it should be fixed aClippedPolyPolygon = std::move(polyPolygon); break; } case EmfPlusCombineModeExclude: { //TODO It is not correct and it should be fixed aClippedPolyPolygon = ::basegfx::B2DPolyPolygon(); break; } } } HandleNewClipRegion(aClippedPolyPolygon, mrTargetHolders, mrPropertyHolders); break; } case EmfPlusRecordTypeOffsetClip: { float dx, dy; rMS.ReadFloat(dx).ReadFloat(dy); SAL_INFO("drawinglayer.emf", "EMF+\tOffset x:" << dx << ", y:" << dy); basegfx::B2DPolyPolygon aPolyPolygon( mrPropertyHolders.Current().getClipPolyPolygon()); SAL_INFO("drawinglayer.emf", "EMF+\t PolyPolygon before translate: " << aPolyPolygon); basegfx::B2DPoint aOffset = Map(dx, dy); basegfx::B2DHomMatrix transformMatrix; transformMatrix.set(0, 2, aOffset.getX()); transformMatrix.set(1, 2, aOffset.getY()); aPolyPolygon.transform(transformMatrix); SAL_INFO("drawinglayer.emf", "EMF+\t PolyPolygon after translate: " << aPolyPolygon << ", mapped offset x" << aOffset.getX() << ", mapped offset y" << aOffset.getY()); HandleNewClipRegion(aPolyPolygon, mrTargetHolders, mrPropertyHolders); break; } case EmfPlusRecordTypeDrawDriverString: { sal_uInt32 brushIndexOrColor; sal_uInt32 optionFlags; sal_uInt32 hasMatrix; sal_uInt32 glyphsCount; rMS.ReadUInt32(brushIndexOrColor).ReadUInt32(optionFlags).ReadUInt32(hasMatrix).ReadUInt32(glyphsCount); SAL_INFO("drawinglayer.emf", "EMF+\t " << ((flags & 0x8000) ? "Color" : "Brush index") << ": 0x" << std::hex << brushIndexOrColor << std::dec); SAL_INFO("drawinglayer.emf", "EMF+\t Option flags: 0x" << std::hex << optionFlags << std::dec); SAL_INFO("drawinglayer.emf", "EMF+\t Has matrix: " << hasMatrix); SAL_INFO("drawinglayer.emf", "EMF+\t Glyphs: " << glyphsCount); if ((optionFlags & 1) && glyphsCount > 0) { std::unique_ptr charsPosX(new float[glyphsCount]); std::unique_ptr charsPosY(new float[glyphsCount]); OUString text = read_uInt16s_ToOUString(rMS, glyphsCount); SAL_INFO("drawinglayer.emf", "EMF+\t DrawDriverString string: " << text); for (sal_uInt32 i = 0; i(maEMFPObjects[flags & 0xff].get()); if (!font) { break; } // done reading drawinglayer::attribute::FontAttribute fontAttribute( font->family, // font family u""_ustr, // (no) font style font->Bold() ? 8u : 1u, // weight: 8 = bold font->family == "SYMBOL", // symbol optionFlags & 0x2, // vertical font->Italic(), // italic false, // monospaced false, // outline = false, no such thing in MS-EMFPLUS false, // right-to-left false); // BiDiStrong const Color color = EMFPGetBrushColorOrARGBColor(flags, brushIndexOrColor); // generate TextSimplePortionPrimitive2Ds or TextDecoratedPortionPrimitive2D // for all portions of text with the same charsPosY values sal_uInt32 pos = 0; while (pos < glyphsCount) { //determine the current length sal_uInt32 aLength = 1; while (pos + aLength < glyphsCount && std::abs( charsPosY[pos + aLength] - charsPosY[pos] ) < std::numeric_limits< float >::epsilon()) aLength++; // generate the DX-Array std::vector aDXArray; for (size_t i = 0; i < aLength - 1; i++) { aDXArray.push_back(charsPosX[pos + i + 1] - charsPosX[pos]); } // last entry aDXArray.push_back(0); basegfx::B2DHomMatrix transformMatrix = basegfx::utils::createScaleTranslateB2DHomMatrix( ::basegfx::B2DVector(font->emSize, font->emSize), ::basegfx::B2DPoint(charsPosX[pos], charsPosY[pos])); if (hasMatrix) transformMatrix *= transform; if (color.GetAlpha() > 0) { rtl::Reference pBaseText; if (font->Underline() || font->Strikeout()) { pBaseText = new drawinglayer::primitive2d::TextDecoratedPortionPrimitive2D( transformMatrix, text, pos, // take character at current pos aLength, // use determined length std::move(aDXArray), // generated DXArray {}, fontAttribute, Application::GetSettings().GetLanguageTag().getLocale(), color.getBColor(), COL_TRANSPARENT, color.getBColor(), color.getBColor(), drawinglayer::primitive2d::TEXT_LINE_NONE, font->Underline() ? drawinglayer::primitive2d::TEXT_LINE_SINGLE : drawinglayer::primitive2d::TEXT_LINE_NONE, false, font->Strikeout() ? drawinglayer::primitive2d::TEXT_STRIKEOUT_SINGLE : drawinglayer::primitive2d::TEXT_STRIKEOUT_NONE); } else { pBaseText = new drawinglayer::primitive2d::TextSimplePortionPrimitive2D( transformMatrix, text, pos, // take character at current pos aLength, // use determined length std::move(aDXArray), // generated DXArray {}, fontAttribute, Application::GetSettings().GetLanguageTag().getLocale(), color.getBColor()); } drawinglayer::primitive2d::Primitive2DReference aPrimitiveText(pBaseText); if (color.IsTransparent()) { aPrimitiveText = new drawinglayer::primitive2d::UnifiedTransparencePrimitive2D( drawinglayer::primitive2d::Primitive2DContainer { aPrimitiveText }, (255 - color.GetAlpha()) / 255.0); } mrTargetHolders.Current().append( new drawinglayer::primitive2d::TransformPrimitive2D( maMapTransform, drawinglayer::primitive2d::Primitive2DContainer { aPrimitiveText } )); } // update pos pos += aLength; } } else { SAL_WARN("drawinglayer.emf", "EMF+\tTODO: fonts (non-unicode glyphs chars)"); } break; } default: { SAL_WARN("drawinglayer.emf", "EMF+ TODO unhandled record type: 0x" << std::hex << type << std::dec); } } } rMS.Seek(next); if (size <= length) { length -= size; } else { SAL_WARN("drawinglayer.emf", "ImplRenderer::processEMFPlus: " "size " << size << " > length " << length); length = 0; } } } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */