/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include "unofored_internal.hxx" using namespace ::com::sun::star; SvxOutlinerForwarder::SvxOutlinerForwarder( Outliner& rOutl, bool bOutlText /* = false */ ) : rOutliner( rOutl ), bOutlinerText( bOutlText ), mnParaAttribsCache( 0 ) { } SvxOutlinerForwarder::~SvxOutlinerForwarder() { flushCache(); } sal_Int32 SvxOutlinerForwarder::GetParagraphCount() const { return rOutliner.GetParagraphCount(); } sal_Int32 SvxOutlinerForwarder::GetTextLen( sal_Int32 nParagraph ) const { return rOutliner.GetEditEngine().GetTextLen( nParagraph ); } OUString SvxOutlinerForwarder::GetText( const ESelection& rSel ) const { //! GetText (ESelection) should probably also be in the Outliner // in the time being use as the hack for the EditEngine: EditEngine* pEditEngine = const_cast(&rOutliner.GetEditEngine()); return pEditEngine->GetText( rSel ); } static SfxItemSet ImplOutlinerForwarderGetAttribs( const ESelection& rSel, EditEngineAttribs nOnlyHardAttrib, EditEngine& rEditEngine ) { if( rSel.nStartPara == rSel.nEndPara ) { GetAttribsFlags nFlags = GetAttribsFlags::NONE; switch( nOnlyHardAttrib ) { case EditEngineAttribs::All: nFlags = GetAttribsFlags::ALL; break; case EditEngineAttribs::OnlyHard: nFlags = GetAttribsFlags::CHARATTRIBS; break; default: OSL_FAIL("unknown flags for SvxOutlinerForwarder::GetAttribs"); } return rEditEngine.GetAttribs( rSel.nStartPara, rSel.nStartPos, rSel.nEndPos, nFlags ); } else { return rEditEngine.GetAttribs( rSel, nOnlyHardAttrib ); } } SfxItemSet SvxOutlinerForwarder::GetAttribs( const ESelection& rSel, EditEngineAttribs nOnlyHardAttrib ) const { if( moAttribsCache && ( EditEngineAttribs::All == nOnlyHardAttrib ) ) { // have we the correct set in cache? if( maAttribCacheSelection == rSel ) { // yes! just return the cache return *moAttribsCache; } else { // no, we need delete the old cache moAttribsCache.reset(); } } //! Does it not exist on the Outliner? //! and why is the GetAttribs on the EditEngine not a const? EditEngine& rEditEngine = const_cast(rOutliner.GetEditEngine()); SfxItemSet aSet( ImplOutlinerForwarderGetAttribs( rSel, nOnlyHardAttrib, rEditEngine ) ); if( EditEngineAttribs::All == nOnlyHardAttrib ) { moAttribsCache.emplace( aSet ); maAttribCacheSelection = rSel; } SfxStyleSheet* pStyle = rEditEngine.GetStyleSheet( rSel.nStartPara ); if( pStyle ) aSet.SetParent( &(pStyle->GetItemSet() ) ); return aSet; } SfxItemSet SvxOutlinerForwarder::GetParaAttribs( sal_Int32 nPara ) const { if( moParaAttribsCache ) { // have we the correct set in cache? if( nPara == mnParaAttribsCache ) { // yes! just return the cache return *moParaAttribsCache; } else { // no, we need delete the old cache moParaAttribsCache.reset(); } } moParaAttribsCache.emplace( rOutliner.GetParaAttribs( nPara ) ); mnParaAttribsCache = nPara; EditEngine& rEditEngine = const_cast(rOutliner.GetEditEngine()); SfxStyleSheet* pStyle = rEditEngine.GetStyleSheet( nPara ); if( pStyle ) moParaAttribsCache->SetParent( &(pStyle->GetItemSet() ) ); return *moParaAttribsCache; } void SvxOutlinerForwarder::SetParaAttribs( sal_Int32 nPara, const SfxItemSet& rSet ) { flushCache(); const SfxItemSet* pOldParent = rSet.GetParent(); if( pOldParent ) const_cast(&rSet)->SetParent( nullptr ); rOutliner.SetParaAttribs( nPara, rSet ); if( pOldParent ) const_cast(&rSet)->SetParent( pOldParent ); } void SvxOutlinerForwarder::RemoveAttribs( const ESelection& rSelection ) { rOutliner.RemoveAttribs( rSelection, false/*bRemoveParaAttribs*/, 0 ); } SfxItemPool* SvxOutlinerForwarder::GetPool() const { return rOutliner.GetEmptyItemSet().GetPool(); } void SvxOutlinerForwarder::GetPortions( sal_Int32 nPara, std::vector& rList ) const { const_cast(rOutliner.GetEditEngine()).GetPortions( nPara, rList ); } OUString SvxOutlinerForwarder::GetStyleSheet(sal_Int32 nPara) const { if (auto pStyle = rOutliner.GetStyleSheet(nPara)) return pStyle->GetName(); return OUString(); } void SvxOutlinerForwarder::SetStyleSheet(sal_Int32 nPara, const OUString& rStyleName) { auto pStyleSheetPool = rOutliner.GetStyleSheetPool(); if (auto pStyle = pStyleSheetPool ? pStyleSheetPool->Find(rStyleName, SfxStyleFamily::Para) : nullptr) rOutliner.SetStyleSheet(nPara, static_cast(pStyle)); } void SvxOutlinerForwarder::QuickInsertText( const OUString& rText, const ESelection& rSel ) { flushCache(); if( rText.isEmpty() ) { rOutliner.QuickDelete( rSel ); } else { rOutliner.QuickInsertText( rText, rSel ); } } void SvxOutlinerForwarder::QuickInsertLineBreak( const ESelection& rSel ) { flushCache(); rOutliner.QuickInsertLineBreak( rSel ); } void SvxOutlinerForwarder::QuickInsertField( const SvxFieldItem& rFld, const ESelection& rSel ) { flushCache(); rOutliner.QuickInsertField( rFld, rSel ); } void SvxOutlinerForwarder::QuickSetAttribs( const SfxItemSet& rSet, const ESelection& rSel ) { flushCache(); rOutliner.QuickSetAttribs( rSet, rSel ); } OUString SvxOutlinerForwarder::CalcFieldValue( const SvxFieldItem& rField, sal_Int32 nPara, sal_Int32 nPos, std::optional& rpTxtColor, std::optional& rpFldColor, std::optional& rpFldLineStyle ) { return rOutliner.CalcFieldValue( rField, nPara, nPos, rpTxtColor, rpFldColor, rpFldLineStyle ); } void SvxOutlinerForwarder::FieldClicked( const SvxFieldItem& /*rField*/ ) { } bool SvxOutlinerForwarder::IsValid() const { // cannot reliably query outliner state // while in the middle of an update return rOutliner.IsUpdateLayout(); } SfxItemState SvxOutlinerForwarder::GetItemState( const ESelection& rSel, sal_uInt16 nWhich ) const { return GetSvxEditEngineItemState( rOutliner.GetEditEngine(), rSel, nWhich ); } SfxItemState SvxOutlinerForwarder::GetItemState( sal_Int32 nPara, sal_uInt16 nWhich ) const { const SfxItemSet& rSet = rOutliner.GetParaAttribs( nPara ); return rSet.GetItemState( nWhich ); } void SvxOutlinerForwarder::flushCache() { moAttribsCache.reset(); moParaAttribsCache.reset(); } LanguageType SvxOutlinerForwarder::GetLanguage( sal_Int32 nPara, sal_Int32 nIndex ) const { return rOutliner.GetLanguage(nPara, nIndex); } sal_Int32 SvxOutlinerForwarder::GetFieldCount( sal_Int32 nPara ) const { return rOutliner.GetEditEngine().GetFieldCount(nPara); } EFieldInfo SvxOutlinerForwarder::GetFieldInfo( sal_Int32 nPara, sal_uInt16 nField ) const { return rOutliner.GetEditEngine().GetFieldInfo( nPara, nField ); } EBulletInfo SvxOutlinerForwarder::GetBulletInfo( sal_Int32 nPara ) const { return rOutliner.GetBulletInfo( nPara ); } tools::Rectangle SvxOutlinerForwarder::GetCharBounds( sal_Int32 nPara, sal_Int32 nIndex ) const { // EditEngine's 'internal' methods like GetCharacterBounds() // don't rotate for vertical text. Size aSize( rOutliner.CalcTextSize() ); // swap width and height tools::Long tmp = aSize.Width(); aSize.setWidth(aSize.Height()); aSize.setHeight(tmp); bool bIsVertical( rOutliner.IsVertical() ); // #108900# Handle virtual position one-past-the end of the string if( nIndex >= GetTextLen(nPara) ) { tools::Rectangle aLast; if( nIndex ) { // use last character, if possible aLast = rOutliner.GetEditEngine().GetCharacterBounds( EPosition(nPara, nIndex-1) ); // move at end of this last character, make one pixel wide aLast.Move( aLast.Right() - aLast.Left(), 0 ); aLast.SetSize( Size(1, aLast.GetHeight()) ); // take care for CTL aLast = SvxEditSourceHelper::EEToUserSpace( aLast, aSize, bIsVertical ); } else { // #109864# Bounds must lie within the paragraph aLast = GetParaBounds( nPara ); // #109151# Don't use paragraph height, but line height // instead. aLast is already CTL-correct if( bIsVertical) aLast.SetSize( Size( rOutliner.GetLineHeight(nPara), 1 ) ); else aLast.SetSize( Size( 1, rOutliner.GetLineHeight(nPara) ) ); } return aLast; } else { return SvxEditSourceHelper::EEToUserSpace( rOutliner.GetEditEngine().GetCharacterBounds( EPosition(nPara, nIndex) ), aSize, bIsVertical ); } } tools::Rectangle SvxOutlinerForwarder::GetParaBounds( sal_Int32 nPara ) const { return rOutliner.GetParaBounds( nPara ); } MapMode SvxOutlinerForwarder::GetMapMode() const { return rOutliner.GetRefMapMode(); } OutputDevice* SvxOutlinerForwarder::GetRefDevice() const { return rOutliner.GetRefDevice(); } bool SvxOutlinerForwarder::GetIndexAtPoint( const Point& rPos, sal_Int32& nPara, sal_Int32& nIndex ) const { Size aSize( rOutliner.CalcTextSize() ); // swap width and height tools::Long tmp = aSize.Width(); aSize.setWidth(aSize.Height()); aSize.setHeight(tmp); Point aEEPos( SvxEditSourceHelper::UserSpaceToEE( rPos, aSize, rOutliner.IsVertical() )); EPosition aDocPos = rOutliner.GetEditEngine().FindDocPosition( aEEPos ); nPara = aDocPos.nPara; nIndex = aDocPos.nIndex; return true; } bool SvxOutlinerForwarder::GetWordIndices( sal_Int32 nPara, sal_Int32 nIndex, sal_Int32& nStart, sal_Int32& nEnd ) const { ESelection aRes = rOutliner.GetEditEngine().GetWord( ESelection(nPara, nIndex, nPara, nIndex), css::i18n::WordType::DICTIONARY_WORD ); if( aRes.nStartPara == nPara && aRes.nStartPara == aRes.nEndPara ) { nStart = aRes.nStartPos; nEnd = aRes.nEndPos; return true; } return false; } bool SvxOutlinerForwarder::GetAttributeRun( sal_Int32& nStartIndex, sal_Int32& nEndIndex, sal_Int32 nPara, sal_Int32 nIndex, bool bInCell ) const { SvxEditSourceHelper::GetAttributeRun( nStartIndex, nEndIndex, rOutliner.GetEditEngine(), nPara, nIndex, bInCell ); return true; } sal_Int32 SvxOutlinerForwarder::GetLineCount( sal_Int32 nPara ) const { return rOutliner.GetLineCount(nPara); } sal_Int32 SvxOutlinerForwarder::GetLineLen( sal_Int32 nPara, sal_Int32 nLine ) const { return rOutliner.GetLineLen(nPara, nLine); } void SvxOutlinerForwarder::GetLineBoundaries( /*out*/sal_Int32 &rStart, /*out*/sal_Int32 &rEnd, sal_Int32 nPara, sal_Int32 nLine ) const { return rOutliner.GetEditEngine().GetLineBoundaries( rStart, rEnd, nPara, nLine ); } sal_Int32 SvxOutlinerForwarder::GetLineNumberAtIndex( sal_Int32 nPara, sal_Int32 nIndex ) const { return rOutliner.GetEditEngine().GetLineNumberAtIndex( nPara, nIndex ); } bool SvxOutlinerForwarder::QuickFormatDoc( bool ) { rOutliner.QuickFormatDoc(); return true; } bool SvxOutlinerForwarder::Delete( const ESelection& rSelection ) { flushCache(); rOutliner.QuickDelete( rSelection ); rOutliner.QuickFormatDoc(); return true; } bool SvxOutlinerForwarder::InsertText( const OUString& rStr, const ESelection& rSelection ) { flushCache(); rOutliner.QuickInsertText( rStr, rSelection ); rOutliner.QuickFormatDoc(); return true; } sal_Int16 SvxOutlinerForwarder::GetDepth( sal_Int32 nPara ) const { DBG_ASSERT( 0 <= nPara && nPara < GetParagraphCount(), "SvxOutlinerForwarder::GetDepth: Invalid paragraph index"); Paragraph* pPara = rOutliner.GetParagraph( nPara ); sal_Int16 nLevel = -1; if( pPara ) nLevel = rOutliner.GetDepth( nPara ); return nLevel; } bool SvxOutlinerForwarder::SetDepth( sal_Int32 nPara, sal_Int16 nNewDepth ) { DBG_ASSERT( 0 <= nPara && nPara < GetParagraphCount(), "SvxOutlinerForwarder::SetDepth: Invalid paragraph index"); if( (nNewDepth >= -1) && (nNewDepth <= 9) && (0 <= nPara && nPara < GetParagraphCount()) ) { Paragraph* pPara = rOutliner.GetParagraph( nPara ); if( pPara ) { rOutliner.SetDepth( pPara, nNewDepth ); // const bool bOutlinerText = pSdrObject && (pSdrObject->GetObjInventor() == SdrInventor::Default) && (pSdrObject->GetObjIdentifier() == OBJ_OUTLINETEXT); if( bOutlinerText ) rOutliner.SetLevelDependentStyleSheet( nPara ); return true; } } return false; } sal_Int32 SvxOutlinerForwarder::GetNumberingStartValue( sal_Int32 nPara ) { if( 0 <= nPara && nPara < GetParagraphCount() ) { return rOutliner.GetNumberingStartValue( nPara ); } else { OSL_FAIL( "SvxOutlinerForwarder::GetNumberingStartValue)(), Invalid paragraph index"); return -1; } } void SvxOutlinerForwarder::SetNumberingStartValue( sal_Int32 nPara, sal_Int32 nNumberingStartValue ) { if( 0 <= nPara && nPara < GetParagraphCount() ) { rOutliner.SetNumberingStartValue( nPara, nNumberingStartValue ); } else { OSL_FAIL( "SvxOutlinerForwarder::SetNumberingStartValue)(), Invalid paragraph index"); } } bool SvxOutlinerForwarder::IsParaIsNumberingRestart( sal_Int32 nPara ) { if( 0 <= nPara && nPara < GetParagraphCount() ) { return rOutliner.IsParaIsNumberingRestart( nPara ); } else { OSL_FAIL( "SvxOutlinerForwarder::IsParaIsNumberingRestart)(), Invalid paragraph index"); return false; } } void SvxOutlinerForwarder::SetParaIsNumberingRestart( sal_Int32 nPara, bool bParaIsNumberingRestart ) { if( 0 <= nPara && nPara < GetParagraphCount() ) { rOutliner.SetParaIsNumberingRestart( nPara, bParaIsNumberingRestart ); } else { OSL_FAIL( "SvxOutlinerForwarder::SetParaIsNumberingRestart)(), Invalid paragraph index"); } } const SfxItemSet * SvxOutlinerForwarder::GetEmptyItemSetPtr() { EditEngine& rEditEngine = const_cast< EditEngine& >( rOutliner.GetEditEngine() ); return &rEditEngine.GetEmptyItemSet(); } void SvxOutlinerForwarder::AppendParagraph() { EditEngine& rEditEngine = const_cast< EditEngine& >( rOutliner.GetEditEngine() ); rEditEngine.InsertParagraph( rEditEngine.GetParagraphCount(), OUString() ); } sal_Int32 SvxOutlinerForwarder::AppendTextPortion( sal_Int32 nPara, const OUString &rText, const SfxItemSet & /*rSet*/ ) { sal_Int32 nLen = 0; EditEngine& rEditEngine = const_cast< EditEngine& >( rOutliner.GetEditEngine() ); sal_Int32 nParaCount = rEditEngine.GetParagraphCount(); DBG_ASSERT( 0 <= nPara && nPara < nParaCount, "paragraph index out of bounds" ); if (0 <= nPara && nPara < nParaCount) { nLen = rEditEngine.GetTextLen( nPara ); rEditEngine.QuickInsertText( rText, ESelection( nPara, nLen, nPara, nLen ) ); } return nLen; } void SvxOutlinerForwarder::CopyText(const SvxTextForwarder& rSource) { const SvxOutlinerForwarder* pSourceForwarder = dynamic_cast< const SvxOutlinerForwarder* >( &rSource ); if( !pSourceForwarder ) return; std::optional pNewOutlinerParaObject = pSourceForwarder->rOutliner.CreateParaObject(); rOutliner.SetText( *pNewOutlinerParaObject ); } sal_Int32 SvxTextForwarder::GetNumberingStartValue( sal_Int32 ) { return -1; } void SvxTextForwarder::SetNumberingStartValue( sal_Int32, sal_Int32 ) { } bool SvxTextForwarder::IsParaIsNumberingRestart( sal_Int32 ) { return false; } void SvxTextForwarder::SetParaIsNumberingRestart( sal_Int32, bool ) { } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ ature/gccwrapper'>feature/gccwrapper LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/ridljar/pom.libreoffice.xml
AgeCommit message (Expand)Author
2020-05-07add pom for libreoffice.jarRene Engelhard