/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if OSL_DEBUG_LEVEL > 1 #define EMFP_DEBUG(x) x #else #define EMFP_DEBUG(x) #endif namespace emfio { SvStream& operator >> (SvStream& rInStream, XForm& rXForm) { if (sizeof(float) != 4) { OSL_FAIL("EmfReader::sizeof( float ) != 4"); rXForm = XForm(); } else { rInStream.ReadFloat(rXForm.eM11); rInStream.ReadFloat(rXForm.eM12); rInStream.ReadFloat(rXForm.eM21); rInStream.ReadFloat(rXForm.eM22); rInStream.ReadFloat(rXForm.eDx); rInStream.ReadFloat(rXForm.eDy); } return rInStream; } void WinMtfClipPath::intersectClipRect( const tools::Rectangle& rRect ) { maClip.intersectRange(vcl::unotools::b2DRectangleFromRectangle(rRect)); } void WinMtfClipPath::excludeClipRect( const tools::Rectangle& rRect ) { maClip.subtractRange(vcl::unotools::b2DRectangleFromRectangle(rRect)); } void WinMtfClipPath::setClipPath( const tools::PolyPolygon& rPolyPolygon, sal_Int32 nClippingMode ) { const basegfx::B2DPolyPolygon& rB2DPoly=rPolyPolygon.getB2DPolyPolygon(); switch ( nClippingMode ) { case RGN_OR : maClip.unionPolyPolygon(rB2DPoly); break; case RGN_XOR : maClip.xorPolyPolygon(rB2DPoly); break; case RGN_DIFF : maClip.subtractPolyPolygon(rB2DPoly); break; case RGN_AND : maClip.intersectPolyPolygon(rB2DPoly); break; case RGN_COPY : maClip = basegfx::utils::B2DClipState(rB2DPoly); break; } } void WinMtfClipPath::moveClipRegion( const Size& rSize ) { basegfx::B2DHomMatrix aTranslate; aTranslate.translate(rSize.Width(), rSize.Height()); maClip.transform(aTranslate); } void WinMtfClipPath::setDefaultClipPath() { // Empty clip region - everything visible maClip = basegfx::utils::B2DClipState(); } basegfx::B2DPolyPolygon const & WinMtfClipPath::getClipPath() const { return maClip.getClipPoly(); } void WinMtfPathObj::AddPoint( const Point& rPoint ) { if ( bClosed ) Insert( tools::Polygon() ); tools::Polygon& rPoly = static_cast(*this)[ Count() - 1 ]; rPoly.Insert( rPoly.GetSize(), rPoint ); bClosed = false; } void WinMtfPathObj::AddPolyLine( const tools::Polygon& rPolyLine ) { if ( bClosed ) Insert( tools::Polygon() ); tools::Polygon& rPoly = static_cast(*this)[ Count() - 1 ]; rPoly.Insert( rPoly.GetSize(), rPolyLine ); bClosed = false; } void WinMtfPathObj::AddPolygon( const tools::Polygon& rPoly ) { Insert( rPoly ); bClosed = true; } void WinMtfPathObj::AddPolyPolygon( const tools::PolyPolygon& rPolyPoly ) { sal_uInt16 i, nCount = rPolyPoly.Count(); for ( i = 0; i < nCount; i++ ) Insert( rPolyPoly[ i ] ); bClosed = true; } void WinMtfPathObj::ClosePath() { if ( Count() ) { tools::Polygon& rPoly = static_cast(*this)[ Count() - 1 ]; if ( rPoly.GetSize() > 2 ) { Point aFirst( rPoly[ 0 ] ); if ( aFirst != rPoly[ rPoly.GetSize() - 1 ] ) rPoly.Insert( rPoly.GetSize(), aFirst ); } } bClosed = true; } namespace { OUString getLODefaultLanguage() { if (utl::ConfigManager::IsFuzzing()) return "en-US"; OUString result(officecfg::Office::Linguistic::General::DefaultLocale::get()); if (result.isEmpty()) result = officecfg::Setup::L10N::ooSetupSystemLocale::get(); return result; } } WinMtfFontStyle::WinMtfFontStyle( LOGFONTW const & rFont ) { rtl_TextEncoding eCharSet; if ((rFont.alfFaceName == "Symbol") || (rFont.alfFaceName == "MT Extra")) eCharSet = RTL_TEXTENCODING_SYMBOL; else if ((rFont.lfCharSet == DEFAULT_CHARSET) || (rFont.lfCharSet == OEM_CHARSET)) eCharSet = utl_getWinTextEncodingFromLangStr(getLODefaultLanguage().toUtf8().getStr(), rFont.lfCharSet == OEM_CHARSET); else eCharSet = rtl_getTextEncodingFromWindowsCharset( rFont.lfCharSet ); if ( eCharSet == RTL_TEXTENCODING_DONTKNOW ) eCharSet = RTL_TEXTENCODING_MS_1252; aFont.SetCharSet( eCharSet ); aFont.SetFamilyName( rFont.alfFaceName ); FontFamily eFamily; switch ( rFont.lfPitchAndFamily & 0xf0 ) { case FF_ROMAN: eFamily = FAMILY_ROMAN; break; case FF_SWISS: eFamily = FAMILY_SWISS; break; case FF_MODERN: eFamily = FAMILY_MODERN; break; case FF_SCRIPT: eFamily = FAMILY_SCRIPT; break; case FF_DECORATIVE: eFamily = FAMILY_DECORATIVE; break; default: eFamily = FAMILY_DONTKNOW; break; } aFont.SetFamily( eFamily ); FontPitch ePitch; switch ( rFont.lfPitchAndFamily & 0x0f ) { case FIXED_PITCH: ePitch = PITCH_FIXED; break; case DEFAULT_PITCH: case VARIABLE_PITCH: default: ePitch = PITCH_VARIABLE; break; } aFont.SetPitch( ePitch ); FontWeight eWeight; if (rFont.lfWeight == 0) // default weight SHOULD be used eWeight = WEIGHT_DONTKNOW; else if (rFont.lfWeight <= FW_THIN) eWeight = WEIGHT_THIN; else if( rFont.lfWeight <= FW_ULTRALIGHT ) eWeight = WEIGHT_ULTRALIGHT; else if( rFont.lfWeight <= FW_LIGHT ) eWeight = WEIGHT_LIGHT; else if( rFont.lfWeight < FW_MEDIUM ) eWeight = WEIGHT_NORMAL; else if( rFont.lfWeight == FW_MEDIUM ) eWeight = WEIGHT_MEDIUM; else if( rFont.lfWeight <= FW_SEMIBOLD ) eWeight = WEIGHT_SEMIBOLD; else if( rFont.lfWeight <= FW_BOLD ) eWeight = WEIGHT_BOLD; else if( rFont.lfWeight <= FW_ULTRABOLD ) eWeight = WEIGHT_ULTRABOLD; else eWeight = WEIGHT_BLACK; aFont.SetWeight( eWeight ); if( rFont.lfItalic ) aFont.SetItalic( ITALIC_NORMAL ); if( rFont.lfUnderline ) aFont.SetUnderline( LINESTYLE_SINGLE ); if( rFont.lfStrikeOut ) aFont.SetStrikeout( STRIKEOUT_SINGLE ); aFont.SetOrientation( static_cast(rFont.lfEscapement) ); Size aFontSize( Size( rFont.lfWidth, rFont.lfHeight ) ); if ( rFont.lfHeight > 0 ) { // #i117968# VirtualDevice is not thread safe, but filter is used in multithreading SolarMutexGuard aGuard; ScopedVclPtrInstance< VirtualDevice > pVDev; // converting the cell height into a font height aFont.SetFontSize( aFontSize ); pVDev->SetFont( aFont ); FontMetric aMetric( pVDev->GetFontMetric() ); long nHeight = aMetric.GetAscent() + aMetric.GetDescent(); if (nHeight) { double fHeight = (static_cast(aFontSize.Height()) * rFont.lfHeight ) / nHeight; aFontSize.setHeight( static_cast( fHeight + 0.5 ) ); } } // Convert height to positive aFontSize.setHeight( std::abs(aFontSize.Height()) ); aFont.SetFontSize(aFontSize); }; Color MtfTools::ReadColor() { sal_uInt32 nColor; mpInputStream->ReadUInt32( nColor ); return Color( static_cast(nColor), static_cast( nColor >> 8 ), static_cast( nColor >> 16 ) ); }; Point MtfTools::ImplScale(const Point& rPoint) // Hack to set varying defaults for incompletely defined files. { if (!mbIsMapDevSet) return Point(rPoint.X() * UNDOCUMENTED_WIN_RCL_RELATION - mrclFrame.Left(), rPoint.Y() * UNDOCUMENTED_WIN_RCL_RELATION - mrclFrame.Top()); else return rPoint; } Point MtfTools::ImplMap( const Point& rPt ) { if ( mnWinExtX && mnWinExtY ) { double fX = rPt.X(); double fY = rPt.Y(); double fX2 = fX * maXForm.eM11 + fY * maXForm.eM21 + maXForm.eDx; double fY2 = fX * maXForm.eM12 + fY * maXForm.eM22 + maXForm.eDy; if ( mnGfxMode == GM_COMPATIBLE ) { switch( mnMapMode ) { case MM_LOENGLISH : { fX2 -= mnWinOrgX; fY2 = mnWinOrgY-fY2; fX2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH*10; fY2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH*10; fX2 += mnDevOrgX; fY2 += mnDevOrgY; } break; case MM_HIENGLISH : { fX2 -= mnWinOrgX; fY2 = mnWinOrgY-fY2; fX2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH; fY2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH; fX2 += mnDevOrgX; fY2 += mnDevOrgY; } break; case MM_TWIPS: { fX2 -= mnWinOrgX; fY2 = mnWinOrgY-fY2; fX2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH/MILLIINCH_PER_TWIPS; fY2 *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH/MILLIINCH_PER_TWIPS; fX2 += mnDevOrgX; fY2 += mnDevOrgY; } break; case MM_LOMETRIC : { fX2 -= mnWinOrgX; fY2 = mnWinOrgY-fY2; fX2 *= 10; fY2 *= 10; fX2 += mnDevOrgX; fY2 += mnDevOrgY; } break; case MM_HIMETRIC : // in hundredth of a millimeter { fX2 -= mnWinOrgX; fY2 = mnWinOrgY-fY2; fX2 += mnDevOrgX; fY2 += mnDevOrgY; } break; default : { if (mnPixX == 0 || mnPixY == 0) { SAL_WARN("emfio", "invalid scaling factor"); return Point(); } else { fX2 -= mnWinOrgX; fY2 -= mnWinOrgY; fX2 /= mnWinExtX; fY2 /= mnWinExtY; fX2 *= mnDevWidth; fY2 *= mnDevHeight; fX2 += mnDevOrgX; fY2 += mnDevOrgY; // fX2, fY2 now in device units fX2 *= static_cast(mnMillX) * 100.0 / static_cast(mnPixX); fY2 *= static_cast(mnMillY) * 100.0 / static_cast(mnPixY); } } break; } fX2 -= mrclFrame.Left(); fY2 -= mrclFrame.Top(); } return Point(basegfx::fround(fX2), basegfx::fround(fY2)); } else return Point(); }; Size MtfTools::ImplMap(const Size& rSz, bool bDoWorldTransform) { if ( mnWinExtX && mnWinExtY ) { // #i121382# apply the whole WorldTransform, else a rotation will be misinterpreted double fWidth, fHeight; if (bDoWorldTransform) { fWidth = rSz.Width() * maXForm.eM11 + rSz.Height() * maXForm.eM21; fHeight = rSz.Width() * maXForm.eM12 + rSz.Height() * maXForm.eM22; } else { //take the scale, but not the rotation basegfx::B2DHomMatrix aMatrix(maXForm.eM11, maXForm.eM12, 0, maXForm.eM21, maXForm.eM22, 0); basegfx::B2DTuple aScale, aTranslate; double fRotate, fShearX; if (!aMatrix.decompose(aScale, aTranslate, fRotate, fShearX)) { aScale.setX(1.0); aScale.setY(1.0); } fWidth = rSz.Width() * aScale.getX(); fHeight = rSz.Height() * aScale.getY(); } if ( mnGfxMode == GM_COMPATIBLE ) { switch( mnMapMode ) { case MM_LOENGLISH : { fWidth *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH*10; fHeight*=-HUNDREDTH_MILLIMETERS_PER_MILLIINCH*10; } break; case MM_HIENGLISH : { fWidth *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH; fHeight*=-HUNDREDTH_MILLIMETERS_PER_MILLIINCH; } break; case MM_LOMETRIC : { fWidth *= 10; fHeight*=-10; } break; case MM_HIMETRIC : // in hundredth of millimeters { fHeight *= -1; } break; case MM_TWIPS: { fWidth *= HUNDREDTH_MILLIMETERS_PER_MILLIINCH/MILLIINCH_PER_TWIPS; fHeight*=-HUNDREDTH_MILLIMETERS_PER_MILLIINCH/MILLIINCH_PER_TWIPS; } break; default : { if (mnPixX == 0 || mnPixY == 0) { SAL_WARN("emfio", "invalid scaling factor"); return Size(); } else { fWidth /= mnWinExtX; fHeight /= mnWinExtY; fWidth *= mnDevWidth; fHeight *= mnDevHeight; fWidth *= static_cast(mnMillX) * 100.0 / static_cast(mnPixX); fHeight *= static_cast(mnMillY) * 100.0 / static_cast(mnPixY); } } break; } } return Size(basegfx::fround(fWidth), basegfx::fround(fHeight)); } else return Size(); } tools::Rectangle MtfTools::ImplMap( const tools::Rectangle& rRect ) { tools::Rectangle aRect; aRect.SetPos(ImplMap(rRect.TopLeft())); aRect.SaturatingSetSize(ImplMap(rRect.GetSize())); return aRect; } void MtfTools::ImplMap( vcl::Font& rFont ) { // !!! HACK: we now always set the width to zero because the OS width is interpreted differently; // must later be made portable in SV (KA 1996-02-08) Size aFontSize = ImplMap (rFont.GetFontSize(), false); const auto nHeight = aFontSize.Height(); if (nHeight < 0) aFontSize.setHeight( o3tl::saturating_toggle_sign(nHeight) ); rFont.SetFontSize( aFontSize ); sal_Int32 nResult; const bool bFail = o3tl::checked_multiply(mnWinExtX, mnWinExtY, nResult); if (!bFail && nResult < 0) rFont.SetOrientation( 3600 - rFont.GetOrientation() ); } tools::Polygon& MtfTools::ImplMap( tools::Polygon& rPolygon ) { sal_uInt16 nPoints = rPolygon.GetSize(); for ( sal_uInt16 i = 0; i < nPoints; i++ ) { rPolygon[ i ] = ImplMap( rPolygon[ i ] ); } return rPolygon; } void MtfTools::ImplScale( tools::Polygon& rPolygon ) { sal_uInt16 nPoints = rPolygon.GetSize(); for ( sal_uInt16 i = 0; i < nPoints; i++ ) { rPolygon[ i ] = ImplScale( rPolygon[ i ] ); } } tools::PolyPolygon& MtfTools::ImplScale( tools::PolyPolygon& rPolyPolygon ) { sal_uInt16 nPolys = rPolyPolygon.Count(); for (sal_uInt16 i = 0; i < nPolys; ++i) { ImplScale(rPolyPolygon[i]); } return rPolyPolygon; } tools::PolyPolygon& MtfTools::ImplMap( tools::PolyPolygon& rPolyPolygon ) { sal_uInt16 nPolys = rPolyPolygon.Count(); for ( sal_uInt16 i = 0; i < nPolys; ImplMap( rPolyPolygon[ i++ ] ) ) ; return rPolyPolygon; } void MtfTools::SelectObject( sal_Int32 nIndex ) { if ( nIndex & ENHMETA_STOCK_OBJECT ) { sal_uInt16 nStockId = static_cast(nIndex); switch( nStockId ) { case WHITE_BRUSH : { maFillStyle = WinMtfFillStyle( COL_WHITE ); mbFillStyleSelected = true; } break; case LTGRAY_BRUSH : { maFillStyle = WinMtfFillStyle( COL_LIGHTGRAY ); mbFillStyleSelected = true; } break; case GRAY_BRUSH : case DKGRAY_BRUSH : { maFillStyle = WinMtfFillStyle( COL_GRAY ); mbFillStyleSelected = true; } break; case BLACK_BRUSH : { maFillStyle = WinMtfFillStyle( COL_BLACK ); mbFillStyleSelected = true; } break; case NULL_BRUSH : { maFillStyle = WinMtfFillStyle( COL_TRANSPARENT, true ); mbFillStyleSelected = true; } break; case WHITE_PEN : { maLineStyle = WinMtfLineStyle( COL_WHITE ); } break; case BLACK_PEN : { maLineStyle = WinMtfLineStyle( COL_BLACK ); } break; case NULL_PEN : { maLineStyle = WinMtfLineStyle( COL_TRANSPARENT, true ); } break; default: break; } } else { nIndex &= 0xffff; // safety check: don't allow index to be > 65535 GDIObj *pGDIObj = nullptr; if ( static_cast(nIndex) < mvGDIObj.size() ) pGDIObj = mvGDIObj[ nIndex ].get(); if ( pGDIObj ) { if (const auto pen = dynamic_cast(pGDIObj)) maLineStyle = *pen; else if (const auto brush = dynamic_cast( pGDIObj)) { maFillStyle = *brush; mbFillStyleSelected = true; } else if (const auto font = dynamic_cast( pGDIObj)) { maFont = font->aFont; } } } } void MtfTools::SetTextLayoutMode( ComplexTextLayoutFlags nTextLayoutMode ) { mnTextLayoutMode = nTextLayoutMode; } void MtfTools::SetBkMode( BkMode nMode ) { mnBkMode = nMode; } void MtfTools::SetBkColor( const Color& rColor ) { maBkColor = rColor; } void MtfTools::SetTextColor( const Color& rColor ) { maTextColor = rColor; } void MtfTools::SetTextAlign( sal_uInt32 nAlign ) { mnTextAlign = nAlign; } void MtfTools::ImplResizeObjectArry( sal_uInt32 nNewEntrys ) { mvGDIObj.resize(nNewEntrys); } void MtfTools::ImplDrawClippedPolyPolygon( const tools::PolyPolygon& rPolyPoly ) { if ( rPolyPoly.Count() ) { ImplSetNonPersistentLineColorTransparenz(); if ( rPolyPoly.Count() == 1 ) { if ( rPolyPoly.IsRect() ) mpGDIMetaFile->AddAction( new MetaRectAction( rPolyPoly.GetBoundRect() ) ); else { tools::Polygon aPoly( rPolyPoly[ 0 ] ); sal_uInt16 nCount = aPoly.GetSize(); if ( nCount ) { if ( aPoly[ nCount - 1 ] != aPoly[ 0 ] ) { Point aPoint( aPoly[ 0 ] ); aPoly.Insert( nCount, aPoint ); } mpGDIMetaFile->AddAction( new MetaPolygonAction( aPoly ) ); } } } else mpGDIMetaFile->AddAction( new MetaPolyPolygonAction( rPolyPoly ) ); } } void MtfTools::CreateObject( std::unique_ptr pObject ) { if ( pObject ) { const auto pLineStyle = dynamic_cast(pObject.get()); const auto pFontStyle = dynamic_cast(pObject.get()); if ( pFontStyle ) { if (pFontStyle->aFont.GetFontHeight() == 0) pFontStyle->aFont.SetFontHeight(423); ImplMap(pFontStyle->aFont); // defaulting to 12pt } else if ( pLineStyle ) { Size aSize(pLineStyle->aLineInfo.GetWidth(), 0); aSize = ImplMap(aSize); pLineStyle->aLineInfo.SetWidth(aSize.Width()); } } std::vector>::size_type nIndex; for ( nIndex = 0; nIndex < mvGDIObj.size(); nIndex++ ) { if ( !mvGDIObj[ nIndex ] ) break; } if ( nIndex == mvGDIObj.size() ) ImplResizeObjectArry( mvGDIObj.size() + 16 ); mvGDIObj[ nIndex ] = std::move(pObject); } void MtfTools::CreateObjectIndexed( sal_Int32 nIndex, std::unique_ptr pObject ) { if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) { nIndex &= 0xffff; // safety check: do not allow index to be > 65535 if ( pObject ) { const auto pLineStyle = dynamic_cast(pObject.get()); const auto pFontStyle = dynamic_cast(pObject.get()); if ( pFontStyle ) { if (pFontStyle->aFont.GetFontHeight() == 0) pFontStyle->aFont.SetFontHeight(423); ImplMap(pFontStyle->aFont); } else if ( pLineStyle ) { Size aSize(pLineStyle->aLineInfo.GetWidth(), 0); pLineStyle->aLineInfo.SetWidth( ImplMap(aSize).Width() ); if ( pLineStyle->aLineInfo.GetStyle() == LineStyle::Dash ) { aSize.AdjustWidth(1 ); long nDotLen = ImplMap( aSize ).Width(); pLineStyle->aLineInfo.SetDistance( nDotLen ); pLineStyle->aLineInfo.SetDotLen( nDotLen ); pLineStyle->aLineInfo.SetDashLen( nDotLen * 3 ); } } } if ( static_cast(nIndex) >= mvGDIObj.size() ) ImplResizeObjectArry( nIndex + 16 ); mvGDIObj[ nIndex ] = std::move(pObject); } } void MtfTools::CreateObject() { CreateObject(std::make_unique()); } void MtfTools::DeleteObject( sal_Int32 nIndex ) { if ( ( nIndex & ENHMETA_STOCK_OBJECT ) == 0 ) { if ( static_cast(nIndex) < mvGDIObj.size() ) { mvGDIObj[ nIndex ].reset(); } } } void MtfTools::IntersectClipRect( const tools::Rectangle& rRect ) { if (utl::ConfigManager::IsFuzzing()) return; mbClipNeedsUpdate=true; if ((rRect.Left()-rRect.Right()==0) && (rRect.Top()-rRect.Bottom()==0)) { return; // empty rectangles cause trouble } maClipPath.intersectClipRect( ImplMap( rRect ) ); } void MtfTools::ExcludeClipRect( const tools::Rectangle& rRect ) { if (utl::ConfigManager::IsFuzzing()) return; mbClipNeedsUpdate=true; maClipPath.excludeClipRect( ImplMap( rRect ) ); } void MtfTools::MoveClipRegion( const Size& rSize ) { if (utl::ConfigManager::IsFuzzing()) return; mbClipNeedsUpdate=true; maClipPath.moveClipRegion( ImplMap( rSize ) ); } void MtfTools::SetClipPath( const tools::PolyPolygon& rPolyPolygon, sal_Int32 nClippingMode, bool bIsMapped ) { if (utl::ConfigManager::IsFuzzing()) return; mbClipNeedsUpdate = true; tools::PolyPolygon aPolyPolygon(rPolyPolygon); if (!bIsMapped) { if (!mbIsMapDevSet && (mnMapMode == MM_ISOTROPIC || mnMapMode == MM_ANISOTROPIC)) aPolyPolygon = ImplScale(aPolyPolygon); else aPolyPolygon = ImplMap(aPolyPolygon); } maClipPath.setClipPath(aPolyPolygon, nClippingMode); } void MtfTools::SetDefaultClipPath() { mbClipNeedsUpdate = true; maClipPath.setDefaultClipPath(); } MtfTools::MtfTools( GDIMetaFile& rGDIMetaFile, SvStream& rStreamWMF) : maPathObj(), maClipPath(), maLatestLineStyle(), maLineStyle(), maNopLineStyle(), maLatestFillStyle(), maFillStyle(), maNopFillStyle(), maLatestFont(), maFont(), mnLatestTextAlign(90), mnTextAlign(TA_LEFT | TA_TOP | TA_NOUPDATECP), maLatestTextColor(), maTextColor(), maLatestBkColor(0x12345678), maBkColor(COL_WHITE), mnLatestTextLayoutMode(ComplexTextLayoutFlags::Default), mnTextLayoutMode(ComplexTextLayoutFlags::Default), mnLatestBkMode(BkMode::NONE), mnBkMode(BkMode::OPAQUE), meLatestRasterOp(RasterOp::Invert), meRasterOp(RasterOp::OverPaint), mvGDIObj(), maActPos(), mnRop(), mvSaveStack(), mnGfxMode(GM_COMPATIBLE), mnMapMode(MM_TEXT), maXForm(), mnDevOrgX(0), mnDevOrgY(0), mnDevWidth(1), mnDevHeight(1), mnWinOrgX(0), mnWinOrgY(0), mnWinExtX(1), mnWinExtY(1), mnPixX(100), mnPixY(100), mnMillX(1), mnMillY(1), mrclFrame(), mrclBounds(), mpGDIMetaFile(&rGDIMetaFile), mpInputStream(&rStreamWMF), mnStartPos(0), mnEndPos(0), maBmpSaveList(), mbNopMode(false), mbFillStyleSelected(false), mbClipNeedsUpdate(true), mbComplexClip(false), mbIsMapWinSet(false), mbIsMapDevSet(false) { SvLockBytes *pLB = mpInputStream->GetLockBytes(); if (pLB) { pLB->SetSynchronMode(); } mnStartPos = mpInputStream->Tell(); SetDevOrg(Point()); mpGDIMetaFile->AddAction( new MetaPushAction( PushFlags::CLIPREGION ) ); // The original clipregion has to be on top // of the stack so it can always be restored // this is necessary to be able to support // SetClipRgn( NULL ) and similar ClipRgn actions (SJ) maFont.SetFamilyName( "Arial" ); // sj: #i57205#, we do have some scaling problems if using maFont.SetCharSet( RTL_TEXTENCODING_MS_1252 ); // the default font then most times a x11 font is used, we maFont.SetFontHeight( 423 ); // will prevent this defining a font maLatestLineStyle.aLineColor = Color( 0x12, 0x34, 0x56 ); maLatestFillStyle.aFillColor = Color( 0x12, 0x34, 0x56 ); mnRop = WMFRasterOp::Black; meRasterOp = RasterOp::OverPaint; mpGDIMetaFile->AddAction( new MetaRasterOpAction( RasterOp::OverPaint ) ); } MtfTools::~MtfTools() COVERITY_NOEXCEPT_FALSE { mpGDIMetaFile->AddAction( new MetaPopAction() ); mpGDIMetaFile->SetPrefMapMode(MapMode(MapUnit::Map100thMM)); if ( mrclFrame.IsEmpty() ) mpGDIMetaFile->SetPrefSize( Size( mnDevWidth, mnDevHeight ) ); else mpGDIMetaFile->SetPrefSize( mrclFrame.GetSize() ); } void MtfTools::UpdateClipRegion() { if (mbClipNeedsUpdate) { mbClipNeedsUpdate = false; mbComplexClip = false; mpGDIMetaFile->AddAction( new MetaPopAction() ); // taking the original clipregion mpGDIMetaFile->AddAction( new MetaPushAction( PushFlags::CLIPREGION ) ); // skip for 'no clipping at all' case if( !maClipPath.isEmpty() ) { const basegfx::B2DPolyPolygon& rClipPoly( maClipPath.getClipPath() ); mbComplexClip = rClipPoly.count() > 1 || !basegfx::utils::isRectangle(rClipPoly); static bool bEnableComplexClipViaRegion = getenv("SAL_WMF_COMPLEXCLIP_VIA_REGION") != nullptr; if (bEnableComplexClipViaRegion) { //this makes cases like tdf#45820 work in reasonable time, and I feel in theory should //be just fine. In practice I see the output is different so needs work before its the //default, but for file fuzzing it should be good enough if (mbComplexClip) { mpGDIMetaFile->AddAction( new MetaISectRegionClipRegionAction( vcl::Region(rClipPoly))); mbComplexClip = false; } else { mpGDIMetaFile->AddAction( new MetaISectRectClipRegionAction( vcl::unotools::rectangleFromB2DRectangle( rClipPoly.getB2DRange()))); } } else { //normal case mpGDIMetaFile->AddAction( new MetaISectRectClipRegionAction( vcl::unotools::rectangleFromB2DRectangle( rClipPoly.getB2DRange()))); } } } } void MtfTools::ImplSetNonPersistentLineColorTransparenz() { WinMtfLineStyle aTransparentLine( COL_TRANSPARENT, true ); if ( ! ( maLatestLineStyle == aTransparentLine ) ) { maLatestLineStyle = aTransparentLine; mpGDIMetaFile->AddAction( new MetaLineColorAction( aTransparentLine.aLineColor, !aTransparentLine.bTransparent ) ); } } void MtfTools::UpdateLineStyle() { if (!( maLatestLineStyle == maLineStyle ) ) { maLatestLineStyle = maLineStyle; mpGDIMetaFile->AddAction( new MetaLineColorAction( maLineStyle.aLineColor, !maLineStyle.bTransparent ) ); } } void MtfTools::UpdateFillStyle() { if ( !mbFillStyleSelected ) // SJ: #i57205# taking care of bkcolor if no brush is selected maFillStyle = WinMtfFillStyle( maBkColor, mnBkMode == BkMode::Transparent ); if (!( maLatestFillStyle == maFillStyle ) ) { maLatestFillStyle = maFillStyle; if (maFillStyle.aType == WinMtfFillStyleType::Solid) mpGDIMetaFile->AddAction( new MetaFillColorAction( maFillStyle.aFillColor, !maFillStyle.bTransparent ) ); } } WMFRasterOp MtfTools::SetRasterOp( WMFRasterOp nRasterOp ) { WMFRasterOp nRetROP = mnRop; if ( nRasterOp != mnRop ) { mnRop = nRasterOp; if ( mbNopMode && ( nRasterOp != WMFRasterOp::Nop ) ) { // changing modes from WMFRasterOp::Nop so set pen and brush maFillStyle = maNopFillStyle; maLineStyle = maNopLineStyle; mbNopMode = false; } switch( nRasterOp ) { case WMFRasterOp::Not: meRasterOp = RasterOp::Invert; break; case WMFRasterOp::XorPen: meRasterOp = RasterOp::Xor; break; case WMFRasterOp::Nop: { meRasterOp = RasterOp::OverPaint; if( !mbNopMode ) { maNopFillStyle = maFillStyle; maNopLineStyle = maLineStyle; maFillStyle = WinMtfFillStyle( COL_TRANSPARENT, true ); maLineStyle = WinMtfLineStyle( COL_TRANSPARENT, true ); mbNopMode = true; } } break; default: meRasterOp = RasterOp::OverPaint; break; } } if ( nRetROP != nRasterOp ) mpGDIMetaFile->AddAction( new MetaRasterOpAction( meRasterOp ) ); return nRetROP; }; void MtfTools::StrokeAndFillPath( bool bStroke, bool bFill ) { if ( maPathObj.Count() ) { UpdateClipRegion(); UpdateLineStyle(); UpdateFillStyle(); if ( bFill ) { if ( !bStroke ) { mpGDIMetaFile->AddAction( new MetaPushAction( PushFlags::LINECOLOR ) ); mpGDIMetaFile->AddAction( new MetaLineColorAction( Color(), false ) ); } if ( maPathObj.Count() == 1 ) mpGDIMetaFile->AddAction( new MetaPolygonAction( maPathObj.GetObject( 0 ) ) ); else mpGDIMetaFile->AddAction( new MetaPolyPolygonAction( maPathObj ) ); if ( !bStroke ) mpGDIMetaFile->AddAction( new MetaPopAction() ); } else { sal_uInt16 i, nCount = maPathObj.Count(); for ( i = 0; i < nCount; i++ ) mpGDIMetaFile->AddAction( new MetaPolyLineAction( maPathObj[ i ], maLineStyle.aLineInfo ) ); } ClearPath(); } } void MtfTools::DrawPixel( const Point& rSource, const Color& rColor ) { mpGDIMetaFile->AddAction( new MetaPixelAction( ImplMap( rSource), rColor ) ); } void MtfTools::MoveTo( const Point& rPoint, bool bRecordPath ) { Point aDest( ImplMap( rPoint ) ); if ( bRecordPath ) { // fdo#57353 create new subpath for subsequent moves if ( maPathObj.Count() ) if ( maPathObj[ maPathObj.Count() - 1 ].GetSize() ) maPathObj.Insert( tools::Polygon() ); maPathObj.AddPoint( aDest ); } maActPos = aDest; } void MtfTools::LineTo( const Point& rPoint, bool bRecordPath ) { UpdateClipRegion(); Point aDest( ImplMap( rPoint ) ); if ( bRecordPath ) maPathObj.AddPoint( aDest ); else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaLineAction( maActPos, aDest, maLineStyle.aLineInfo ) ); } maActPos = aDest; } void MtfTools::DrawRect( const tools::Rectangle& rRect, bool bEdge ) { UpdateClipRegion(); UpdateFillStyle(); if ( mbComplexClip ) { tools::Polygon aPoly( ImplMap( rRect ) ); tools::PolyPolygon aPolyPolyRect( aPoly ); tools::PolyPolygon aDest; tools::PolyPolygon(maClipPath.getClipPath()).GetIntersection( aPolyPolyRect, aDest ); ImplDrawClippedPolyPolygon( aDest ); } else { if ( bEdge ) { if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaRectAction( ImplMap( rRect ) ) ); UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( ImplMap( rRect ) ),maLineStyle.aLineInfo ) ); } else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaRectAction( ImplMap( rRect ) ) ); } } else { ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaRectAction( ImplMap( rRect ) ) ); } } } void MtfTools::DrawRoundRect( const tools::Rectangle& rRect, const Size& rSize ) { UpdateClipRegion(); UpdateLineStyle(); UpdateFillStyle(); mpGDIMetaFile->AddAction( new MetaRoundRectAction( ImplMap( rRect ), labs( ImplMap( rSize ).Width() ), labs( ImplMap( rSize ).Height() ) ) ); } void MtfTools::DrawEllipse( const tools::Rectangle& rRect ) { UpdateClipRegion(); UpdateFillStyle(); if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { Point aCenter( ImplMap( rRect.Center() ) ); Size aRad( ImplMap( Size( rRect.GetWidth() / 2, rRect.GetHeight() / 2 ) ) ); ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaEllipseAction( ImplMap( rRect ) ) ); UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( aCenter, aRad.Width(), aRad.Height() ), maLineStyle.aLineInfo ) ); } else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaEllipseAction( ImplMap( rRect ) ) ); } } void MtfTools::DrawArc( const tools::Rectangle& rRect, const Point& rStart, const Point& rEnd, bool bTo ) { UpdateClipRegion(); UpdateLineStyle(); UpdateFillStyle(); tools::Rectangle aRect( ImplMap( rRect ) ); Point aStart( ImplMap( rStart ) ); Point aEnd( ImplMap( rEnd ) ); if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { if ( aStart == aEnd ) { // SJ: #i53768# if start & end is identical, then we have to draw a full ellipse Point aCenter( aRect.Center() ); Size aRad( aRect.GetWidth() / 2, aRect.GetHeight() / 2 ); mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( aCenter, aRad.Width(), aRad.Height() ), maLineStyle.aLineInfo ) ); } else mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( aRect, aStart, aEnd, PolyStyle::Arc ), maLineStyle.aLineInfo ) ); } else mpGDIMetaFile->AddAction( new MetaArcAction( aRect, aStart, aEnd ) ); if ( bTo ) maActPos = aEnd; } void MtfTools::DrawPie( const tools::Rectangle& rRect, const Point& rStart, const Point& rEnd ) { UpdateClipRegion(); UpdateFillStyle(); tools::Rectangle aRect( ImplMap( rRect ) ); Point aStart( ImplMap( rStart ) ); Point aEnd( ImplMap( rEnd ) ); if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaPieAction( aRect, aStart, aEnd ) ); UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( aRect, aStart, aEnd, PolyStyle::Pie ), maLineStyle.aLineInfo ) ); } else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPieAction( aRect, aStart, aEnd ) ); } } void MtfTools::DrawChord( const tools::Rectangle& rRect, const Point& rStart, const Point& rEnd ) { UpdateClipRegion(); UpdateFillStyle(); tools::Rectangle aRect( ImplMap( rRect ) ); Point aStart( ImplMap( rStart ) ); Point aEnd( ImplMap( rEnd ) ); if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaChordAction( aRect, aStart, aEnd ) ); UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( tools::Polygon( aRect, aStart, aEnd, PolyStyle::Chord ), maLineStyle.aLineInfo ) ); } else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaChordAction( aRect, aStart, aEnd ) ); } } void MtfTools::DrawPolygon( tools::Polygon rPolygon, bool bRecordPath ) { UpdateClipRegion(); ImplMap( rPolygon ); if ( bRecordPath ) maPathObj.AddPolygon( rPolygon ); else { UpdateFillStyle(); if ( mbComplexClip ) { tools::PolyPolygon aPolyPoly( rPolygon ); auto tmp = maClipPath.getClip(); tmp.intersectPolyPolygon(aPolyPoly.getB2DPolyPolygon()); tools::PolyPolygon aDest(tmp.getClipPoly()); ImplDrawClippedPolyPolygon( aDest ); } else { if ( maLineStyle.aLineInfo.GetWidth() || ( maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash ) ) { sal_uInt16 nCount = rPolygon.GetSize(); if ( nCount ) { if ( rPolygon[ nCount - 1 ] != rPolygon[ 0 ] ) { Point aPoint( rPolygon[ 0 ] ); rPolygon.Insert( nCount, aPoint ); } } ImplSetNonPersistentLineColorTransparenz(); mpGDIMetaFile->AddAction( new MetaPolygonAction( rPolygon ) ); UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( rPolygon, maLineStyle.aLineInfo ) ); } else { UpdateLineStyle(); if (maLatestFillStyle.aType != WinMtfFillStyleType::Pattern) mpGDIMetaFile->AddAction( new MetaPolygonAction( rPolygon ) ); else { SvtGraphicFill aFill( tools::PolyPolygon( rPolygon ), Color(), 0.0, SvtGraphicFill::fillNonZero, SvtGraphicFill::fillTexture, SvtGraphicFill::Transform(), true, SvtGraphicFill::hatchSingle, Color(), SvtGraphicFill::GradientType::Linear, Color(), Color(), 0, Graphic (maLatestFillStyle.aBmp) ); SvMemoryStream aMemStm; WriteSvtGraphicFill( aMemStm, aFill ); mpGDIMetaFile->AddAction( new MetaCommentAction( "XPATHFILL_SEQ_BEGIN", 0, static_cast(aMemStm.GetData()), aMemStm.TellEnd() ) ); mpGDIMetaFile->AddAction( new MetaCommentAction( "XPATHFILL_SEQ_END" ) ); } } } } } void MtfTools::DrawPolyPolygon( tools::PolyPolygon& rPolyPolygon, bool bRecordPath ) { UpdateClipRegion(); ImplMap( rPolyPolygon ); if ( bRecordPath ) maPathObj.AddPolyPolygon( rPolyPolygon ); else { UpdateFillStyle(); if ( mbComplexClip ) { tools::PolyPolygon aDest; tools::PolyPolygon(maClipPath.getClipPath()).GetIntersection( rPolyPolygon, aDest ); ImplDrawClippedPolyPolygon( aDest ); } else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyPolygonAction( rPolyPolygon ) ); if (maLineStyle.aLineInfo.GetWidth() > 0 || maLineStyle.aLineInfo.GetStyle() == LineStyle::Dash) { for (sal_uInt16 nPoly = 0; nPoly < rPolyPolygon.Count(); ++nPoly) { mpGDIMetaFile->AddAction(new MetaPolyLineAction(rPolyPolygon[nPoly], maLineStyle.aLineInfo)); } } } } } void MtfTools::DrawPolyLine( tools::Polygon rPolygon, bool bTo, bool bRecordPath ) { UpdateClipRegion(); sal_uInt16 nPoints = rPolygon.GetSize(); if (nPoints >= 1) { ImplMap( rPolygon ); if ( bTo ) { rPolygon[ 0 ] = maActPos; maActPos = rPolygon[ rPolygon.GetSize() - 1 ]; } if ( bRecordPath ) maPathObj.AddPolyLine( rPolygon ); else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( rPolygon, maLineStyle.aLineInfo ) ); } } } void MtfTools::DrawPolyBezier( tools::Polygon rPolygon, bool bTo, bool bRecordPath ) { sal_uInt16 nPoints = rPolygon.GetSize(); if ( ( nPoints >= 4 ) && ( ( ( nPoints - 4 ) % 3 ) == 0 ) ) { UpdateClipRegion(); ImplMap( rPolygon ); if ( bTo ) { rPolygon[ 0 ] = maActPos; maActPos = rPolygon[ nPoints - 1 ]; } sal_uInt16 i; for ( i = 0; ( i + 2 ) < nPoints; ) { rPolygon.SetFlags( i++, PolyFlags::Normal ); rPolygon.SetFlags( i++, PolyFlags::Control ); rPolygon.SetFlags( i++, PolyFlags::Control ); } if ( bRecordPath ) maPathObj.AddPolyLine( rPolygon ); else { UpdateLineStyle(); mpGDIMetaFile->AddAction( new MetaPolyLineAction( rPolygon, maLineStyle.aLineInfo ) ); } } } void MtfTools::DrawText( Point& rPosition, OUString const & rText, long* pDXArry, long* pDYArry, bool bRecordPath, sal_Int32 nGfxMode ) { UpdateClipRegion(); rPosition = ImplMap( rPosition ); sal_Int32 nOldGfxMode = GetGfxMode(); SetGfxMode( GM_COMPATIBLE ); if (pDXArry) { sal_Int32 nSumX = 0, nSumY = 0; for (sal_Int32 i = 0; i < rText.getLength(); i++ ) { nSumX += pDXArry[i]; // #i121382# Map DXArray using WorldTransform const Size aSizeX(ImplMap(Size(nSumX, 0))); const basegfx::B2DVector aVectorX(aSizeX.Width(), aSizeX.Height()); pDXArry[i] = basegfx::fround(aVectorX.getLength()); pDXArry[i] *= (nSumX >= 0 ? 1 : -1); if (pDYArry) { nSumY += pDYArry[i]; const Size aSizeY(ImplMap(Size(0, nSumY))); const basegfx::B2DVector aVectorY(aSizeY.Width(), aSizeY.Height()); // Reverse Y pDYArry[i] = basegfx::fround(aVectorY.getLength()); pDYArry[i] *= (nSumY >= 0 ? -1 : 1); } } } if ( mnLatestTextLayoutMode != mnTextLayoutMode ) { mnLatestTextLayoutMode = mnTextLayoutMode; mpGDIMetaFile->AddAction( new MetaLayoutModeAction( mnTextLayoutMode ) ); } SetGfxMode( nGfxMode ); TextAlign eTextAlign; if ( ( mnTextAlign & TA_BASELINE) == TA_BASELINE ) eTextAlign = ALIGN_BASELINE; else if( ( mnTextAlign & TA_BOTTOM) == TA_BOTTOM ) eTextAlign = ALIGN_BOTTOM; else eTextAlign = ALIGN_TOP; bool bChangeFont = false; if ( mnLatestTextAlign != mnTextAlign ) { bChangeFont = true; mnLatestTextAlign = mnTextAlign; mpGDIMetaFile->AddAction( new MetaTextAlignAction( eTextAlign ) ); } if ( maLatestTextColor != maTextColor ) { bChangeFont = true; maLatestTextColor = maTextColor; mpGDIMetaFile->AddAction( new MetaTextColorAction( maTextColor ) ); } bool bChangeFillColor = false; if ( maLatestBkColor != maBkColor ) { bChangeFillColor = true; maLatestBkColor = maBkColor; } if ( mnLatestBkMode != mnBkMode ) { bChangeFillColor = true; mnLatestBkMode = mnBkMode; } if ( bChangeFillColor ) { bChangeFont = true; mpGDIMetaFile->AddAction( new MetaTextFillColorAction( maFont.GetFillColor(), !maFont.IsTransparent() ) ); } vcl::Font aTmp( maFont ); aTmp.SetColor( maTextColor ); aTmp.SetFillColor( maBkColor ); if( mnBkMode == BkMode::Transparent ) aTmp.SetTransparent( true ); else aTmp.SetTransparent( false ); aTmp.SetAlignment( eTextAlign ); if ( nGfxMode == GM_ADVANCED ) { // check whether there is a font rotation applied via transformation Point aP1( ImplMap( Point() ) ); Point aP2( ImplMap( Point( 0, 100 ) ) ); aP2.AdjustX( -(aP1.X()) ); aP2.AdjustY( -(aP1.Y()) ); double fX = aP2.X(); double fY = aP2.Y(); if ( fX ) { double fOrientation = acos( fX / sqrt( fX * fX + fY * fY ) ) * 57.29577951308; if ( fY > 0 ) fOrientation = 360 - fOrientation; fOrientation += 90; fOrientation *= 10; fOrientation += aTmp.GetOrientation(); aTmp.SetOrientation( sal_Int16( fOrientation ) ); } } if( mnTextAlign & ( TA_UPDATECP | TA_RIGHT_CENTER ) ) { // #i117968# VirtualDevice is not thread safe, but filter is used in multithreading SolarMutexGuard aGuard; ScopedVclPtrInstance< VirtualDevice > pVDev; sal_Int32 nTextWidth; Point aActPosDelta; pVDev->SetMapMode( MapMode( MapUnit::Map100thMM ) ); pVDev->SetFont( maFont ); const sal_uInt32 nLen = pDXArry ? rText.getLength() : 0; if (nLen) { nTextWidth = pVDev->GetTextWidth( OUString(rText[ nLen - 1 ]) ); if( nLen > 1 ) nTextWidth += pDXArry[ nLen - 2 ]; // tdf#39894: We should consider the distance to next character cell origin aActPosDelta.setX( pDXArry[ nLen - 1 ] ); if ( pDYArry ) { aActPosDelta.setY( pDYArry[ nLen - 1 ] ); } } else { nTextWidth = pVDev->GetTextWidth( rText ); aActPosDelta.setX( nTextWidth ); } if( mnTextAlign & TA_UPDATECP ) rPosition = maActPos; if ( mnTextAlign & TA_RIGHT_CENTER ) { Point aDisplacement( ( ( mnTextAlign & TA_RIGHT_CENTER ) == TA_RIGHT ) ? nTextWidth : nTextWidth >> 1, 0 ); Point().RotateAround(aDisplacement, maFont.GetOrientation()); rPosition -= aDisplacement; } if( mnTextAlign & TA_UPDATECP ) { Point().RotateAround(aActPosDelta, maFont.GetOrientation()); maActPos = rPosition + aActPosDelta; } } if ( bChangeFont || ( maLatestFont != aTmp ) ) { maLatestFont = aTmp; mpGDIMetaFile->AddAction( new MetaFontAction( aTmp ) ); mpGDIMetaFile->AddAction( new MetaTextAlignAction( aTmp.GetAlignment() ) ); mpGDIMetaFile->AddAction( new MetaTextColorAction( aTmp.GetColor() ) ); mpGDIMetaFile->AddAction( new MetaTextFillColorAction( aTmp.GetFillColor(), !aTmp.IsTransparent() ) ); } if ( bRecordPath ) { // TODO } else { if ( pDXArry && pDYArry ) { for (sal_Int32 i = 0; i < rText.getLength(); ++i) { Point aCharDisplacement( i ? pDXArry[i-1] : 0, i ? pDYArry[i-1] : 0 ); Point().RotateAround(aCharDisplacement, maFont.GetOrientation()); mpGDIMetaFile->AddAction( new MetaTextArrayAction( rPosition + aCharDisplacement, OUString( rText[i] ), nullptr, 0, 1 ) ); } } else { /* because text without dx array is badly scaled, we will create such an array if necessary */ long* pDX = pDXArry; if (!pDXArry) { // #i117968# VirtualDevice is not thread safe, but filter is used in multithreading SolarMutexGuard aGuard; ScopedVclPtrInstance< VirtualDevice > pVDev; pDX = new long[ rText.getLength() ]; pVDev->SetMapMode(MapMode(MapUnit::Map100thMM)); pVDev->SetFont( maLatestFont ); pVDev->GetTextArray( rText, pDX, 0, rText.getLength()); } mpGDIMetaFile->AddAction( new MetaTextArrayAction( rPosition, rText, pDX, 0, rText.getLength() ) ); if ( !pDXArry ) // this means we have created our own array delete[] pDX; // which must be deleted } } SetGfxMode( nOldGfxMode ); } void MtfTools::ImplDrawBitmap( const Point& rPos, const Size& rSize, const BitmapEx& rBitmap ) { BitmapEx aBmpEx( rBitmap ); if ( mbComplexClip ) { vcl::bitmap::DrawAndClipBitmap(rPos, rSize, rBitmap, aBmpEx, maClipPath.getClipPath()); } if ( aBmpEx.IsTransparent() ) mpGDIMetaFile->AddAction( new MetaBmpExScaleAction( rPos, rSize, aBmpEx ) ); else mpGDIMetaFile->AddAction( new MetaBmpScaleAction( rPos, rSize, aBmpEx.GetBitmap() ) ); } void MtfTools::ResolveBitmapActions( std::vector>& rSaveList ) { UpdateClipRegion(); size_t nObjects = rSaveList.size(); size_t nObjectsLeft = nObjects; while ( nObjectsLeft ) { size_t i; size_t nObjectsOfSameSize = 0; size_t nObjectStartIndex = nObjects - nObjectsLeft; BSaveStruct* pSave = rSaveList[nObjectStartIndex].get(); tools::Rectangle aRect( pSave->aOutRect ); for ( i = nObjectStartIndex; i < nObjects; ) { nObjectsOfSameSize++; if ( ++i < nObjects ) { pSave = rSaveList[i].get(); if ( pSave->aOutRect != aRect ) break; } } Point aPos( ImplMap( aRect.TopLeft() ) ); Size aSize( ImplMap( aRect.GetSize() ) ); for ( i = nObjectStartIndex; i < ( nObjectStartIndex + nObjectsOfSameSize ); i++ ) { pSave = rSaveList[i].get(); sal_uInt32 nWinRop = pSave->nWinRop; sal_uInt8 nRasterOperation = static_cast( nWinRop >> 16 ); sal_uInt32 nUsed = 0; if ( ( nRasterOperation & 0xf ) != ( nRasterOperation >> 4 ) ) nUsed |= 1; // pattern is used if ( ( nRasterOperation & 0x33 ) != ( ( nRasterOperation & 0xcc ) >> 2 ) ) nUsed |= 2; // source is used if ( ( nRasterOperation & 0xaa ) != ( ( nRasterOperation & 0x55 ) << 1 ) ) nUsed |= 4; // destination is used if ( (nUsed & 1) && (( nUsed & 2 ) == 0) && nWinRop != PATINVERT ) { // patterns aren't well supported yet WMFRasterOp nOldRop = SetRasterOp( WMFRasterOp::NONE ); // in this case nRasterOperation is either 0 or 0xff UpdateFillStyle(); DrawRect( aRect, false ); SetRasterOp( nOldRop ); } else { bool bDrawn = false; if ( i == nObjectStartIndex ) // optimizing, sometimes it is possible to create just one transparent bitmap { if ( nObjectsOfSameSize == 2 ) { BSaveStruct* pSave2 = rSaveList[i + 1].get(); if ( ( pSave->aBmpEx.GetPrefSize() == pSave2->aBmpEx.GetPrefSize() ) && ( pSave->aBmpEx.GetPrefMapMode() == pSave2->aBmpEx.GetPrefMapMode() ) ) { // TODO: Strictly speaking, we should // check whether mask is monochrome, and // whether image is black (upper branch) // or white (lower branch). Otherwise, the // effect is not the same as a masked // bitmap. if ( ( nWinRop == SRCPAINT ) && ( pSave2->nWinRop == SRCAND ) ) { Bitmap aMask( pSave->aBmpEx.GetBitmap() ); aMask.Invert(); BitmapEx aBmpEx( pSave2->aBmpEx.GetBitmap(), aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); bDrawn = true; i++; } // #i20085# This is just the other way // around as above. Only difference: mask // is inverted else if ( ( nWinRop == SRCAND ) && ( pSave2->nWinRop == SRCPAINT ) ) { Bitmap aMask( pSave->aBmpEx.GetBitmap() ); BitmapEx aBmpEx( pSave2->aBmpEx.GetBitmap(), aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); bDrawn = true; i++; } // tdf#90539 else if ( ( nWinRop == SRCAND ) && ( pSave2->nWinRop == SRCINVERT ) ) { Bitmap aMask( pSave->aBmpEx.GetBitmap() ); BitmapEx aBmpEx( pSave2->aBmpEx.GetBitmap(), aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); bDrawn = true; i++; } } } } if ( !bDrawn ) { Push(); WMFRasterOp nOldRop = SetRasterOp( WMFRasterOp::CopyPen ); Bitmap aBitmap( pSave->aBmpEx.GetBitmap() ); sal_uInt32 nOperation = ( nRasterOperation & 0xf ); switch( nOperation ) { case 0x1 : case 0xe : { if(pSave->aBmpEx.IsAlpha()) { ImplDrawBitmap( aPos, aSize, pSave->aBmpEx ); } else { SetRasterOp( WMFRasterOp::XorPen ); ImplDrawBitmap( aPos, aSize, BitmapEx(aBitmap) ); SetRasterOp( WMFRasterOp::CopyPen ); Bitmap aMask( aBitmap ); aMask.Invert(); BitmapEx aBmpEx( aBitmap, aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); if ( nOperation == 0x1 ) { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } } } break; case 0x7 : case 0x8 : { Bitmap aMask( aBitmap ); if ( ( nUsed & 1 ) && ( nRasterOperation & 0xb0 ) == 0xb0 ) // pattern used { aBitmap.Convert( BmpConversion::N24Bit ); aBitmap.Erase( maFillStyle.aFillColor ); } BitmapEx aBmpEx( aBitmap, aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); if ( nOperation == 0x7 ) { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } } break; case 0x4 : case 0xb : { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); SetRasterOp( WMFRasterOp::CopyPen ); Bitmap aMask( aBitmap ); aBitmap.Invert(); BitmapEx aBmpEx( aBitmap, aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); SetRasterOp( WMFRasterOp::XorPen ); ImplDrawBitmap( aPos, aSize, BitmapEx(aBitmap) ); if ( nOperation == 0xb ) { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } } break; case 0x2 : case 0xd : { Bitmap aMask( aBitmap ); aMask.Invert(); BitmapEx aBmpEx( aBitmap, aMask ); ImplDrawBitmap( aPos, aSize, aBmpEx ); SetRasterOp( WMFRasterOp::XorPen ); ImplDrawBitmap( aPos, aSize, BitmapEx(aBitmap) ); if ( nOperation == 0xd ) { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } } break; case 0x6 : case 0x9 : { SetRasterOp( WMFRasterOp::XorPen ); ImplDrawBitmap( aPos, aSize, BitmapEx(aBitmap) ); if ( nOperation == 0x9 ) { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } } break; case 0x0 : // WHITENESS case 0xf : // BLACKNESS { // in this case nRasterOperation is either 0 or 0xff maFillStyle = WinMtfFillStyle( Color( nRasterOperation, nRasterOperation, nRasterOperation ) ); UpdateFillStyle(); DrawRect( aRect, false ); } break; case 0x3 : // only source is used case 0xc : { if ( nRasterOperation == 0x33 ) aBitmap.Invert(); ImplDrawBitmap( aPos, aSize, BitmapEx(aBitmap) ); } break; case 0x5 : // only destination is used { SetRasterOp( WMFRasterOp::Not ); DrawRect( aRect, false ); } break; case 0xa : // no operation break; } SetRasterOp( nOldRop ); Pop(); } } } nObjectsLeft -= nObjectsOfSameSize; } rSaveList.clear(); } void MtfTools::SetDevOrg( const Point& rPoint ) { mnDevOrgX = rPoint.X(); mnDevOrgY = rPoint.Y(); } void MtfTools::SetDevOrgOffset( sal_Int32 nXAdd, sal_Int32 nYAdd ) { mnDevOrgX += nXAdd; mnDevOrgY += nYAdd; } void MtfTools::SetDevExt( const Size& rSize ,bool regular) { if ( rSize.Width() && rSize.Height() ) { switch( mnMapMode ) { case MM_ISOTROPIC : case MM_ANISOTROPIC : { mnDevWidth = rSize.Width(); mnDevHeight = rSize.Height(); } } if (regular) { mbIsMapDevSet=true; } } } void MtfTools::ScaleDevExt(double fX, double fY) { mnDevWidth = basegfx::fround(mnDevWidth * fX); mnDevHeight = basegfx::fround(mnDevHeight * fY); } void MtfTools::SetWinOrg( const Point& rPoint , bool bIsEMF) { mnWinOrgX = rPoint.X(); mnWinOrgY = rPoint.Y(); if (bIsEMF) { SetDevByWin(); } mbIsMapWinSet=true; } void MtfTools::SetWinOrgOffset( sal_Int32 nXAdd, sal_Int32 nYAdd ) { mnWinOrgX += nXAdd; mnWinOrgY += nYAdd; } void MtfTools::SetDevByWin() //mnWinExt...-stuff has to be assigned before. { if (!mbIsMapDevSet) { if ( mnMapMode == MM_ISOTROPIC ) //TODO: WHAT ABOUT ANISOTROPIC??? { sal_Int32 nX, nY; if (o3tl::checked_add(mnWinExtX, mnWinOrgX, nX) || o3tl::checked_sub(mnWinExtY, mnWinOrgY, nY)) return; Size aSize(nX >> MS_FIXPOINT_BITCOUNT_28_4, -(nY >> MS_FIXPOINT_BITCOUNT_28_4)); SetDevExt(aSize, false); } } } void MtfTools::SetWinExt(const Size& rSize, bool bIsEMF) { if (rSize.Width() && rSize.Height()) { switch( mnMapMode ) { case MM_ISOTROPIC : case MM_ANISOTROPIC : { mnWinExtX = rSize.Width(); mnWinExtY = rSize.Height(); if (bIsEMF) { SetDevByWin(); } mbIsMapWinSet = true; } } } } void MtfTools::ScaleWinExt(double fX, double fY) { mnWinExtX = basegfx::fround(mnWinExtX * fX); mnWinExtY = basegfx::fround(mnWinExtY * fY); } void MtfTools::SetrclBounds( const tools::Rectangle& rRect ) { mrclBounds = rRect; } void MtfTools::SetrclFrame( const tools::Rectangle& rRect ) { mrclFrame = rRect; } void MtfTools::SetRefPix( const Size& rSize ) { mnPixX = rSize.Width(); mnPixY = rSize.Height(); } void MtfTools::SetRefMill( const Size& rSize ) { mnMillX = rSize.Width(); mnMillY = rSize.Height(); } void MtfTools::SetMapMode( sal_uInt32 nMapMode ) { mnMapMode = nMapMode; if ( nMapMode == MM_TEXT && !mbIsMapWinSet ) { mnWinExtX = mnDevWidth; mnWinExtY = mnDevHeight; } else if ( mnMapMode == MM_HIMETRIC ) { sal_Int32 nWinExtX, nWinExtY; if (o3tl::checked_multiply(mnMillX, 100, nWinExtX) || o3tl::checked_multiply(mnMillY, 100, nWinExtY)) { return; } mnWinExtX = nWinExtX; mnWinExtY = nWinExtY; } } void MtfTools::SetWorldTransform( const XForm& rXForm ) { maXForm.eM11 = rXForm.eM11; maXForm.eM12 = rXForm.eM12; maXForm.eM21 = rXForm.eM21; maXForm.eM22 = rXForm.eM22; maXForm.eDx = rXForm.eDx; maXForm.eDy = rXForm.eDy; } void MtfTools::ModifyWorldTransform( const XForm& rXForm, sal_uInt32 nMode ) { switch( nMode ) { case MWT_IDENTITY : { maXForm.eM11 = maXForm.eM22 = 1.0f; maXForm.eM12 = maXForm.eM21 = maXForm.eDx = maXForm.eDy = 0.0f; break; } case MWT_RIGHTMULTIPLY : case MWT_LEFTMULTIPLY : { const XForm* pLeft; const XForm* pRight; if ( nMode == MWT_LEFTMULTIPLY ) { pLeft = &rXForm; pRight = &maXForm; } else { pLeft = &maXForm; pRight = &rXForm; } float aF[3][3]; float bF[3][3]; float cF[3][3]; aF[0][0] = pLeft->eM11; aF[0][1] = pLeft->eM12; aF[0][2] = 0; aF[1][0] = pLeft->eM21; aF[1][1] = pLeft->eM22; aF[1][2] = 0; aF[2][0] = pLeft->eDx; aF[2][1] = pLeft->eDy; aF[2][2] = 1; bF[0][0] = pRight->eM11; bF[0][1] = pRight->eM12; bF[0][2] = 0; bF[1][0] = pRight->eM21; bF[1][1] = pRight->eM22; bF[1][2] = 0; bF[2][0] = pRight->eDx; bF[2][1] = pRight->eDy; bF[2][2] = 1; int i, j, k; for ( i = 0; i < 3; i++ ) { for ( j = 0; j < 3; j++ ) { cF[i][j] = 0; for ( k = 0; k < 3; k++ ) cF[i][j] += aF[i][k] * bF[k][j]; } } maXForm.eM11 = cF[0][0]; maXForm.eM12 = cF[0][1]; maXForm.eM21 = cF[1][0]; maXForm.eM22 = cF[1][1]; maXForm.eDx = cF[2][0]; maXForm.eDy = cF[2][1]; break; } case MWT_SET: { SetWorldTransform(rXForm); break; } } } void MtfTools::Push() // !! to be able to access the original ClipRegion it { // is not allowed to use the MetaPushAction() UpdateClipRegion(); // (the original clip region is on top of the stack) (SJ) std::shared_ptr pSave( new SaveStruct ); pSave->aLineStyle = maLineStyle; pSave->aFillStyle = maFillStyle; pSave->aFont = maFont; pSave->aTextColor = maTextColor; pSave->nTextAlign = mnTextAlign; pSave->nTextLayoutMode = mnTextLayoutMode; pSave->nMapMode = mnMapMode; pSave->nGfxMode = mnGfxMode; pSave->nBkMode = mnBkMode; pSave->aBkColor = maBkColor; pSave->bFillStyleSelected = mbFillStyleSelected; pSave->aActPos = maActPos; pSave->aXForm = maXForm; pSave->eRasterOp = meRasterOp; pSave->nWinOrgX = mnWinOrgX; pSave->nWinOrgY = mnWinOrgY; pSave->nWinExtX = mnWinExtX; pSave->nWinExtY = mnWinExtY; pSave->nDevOrgX = mnDevOrgX; pSave->nDevOrgY = mnDevOrgY; pSave->nDevWidth = mnDevWidth; pSave->nDevHeight = mnDevHeight; pSave->maPathObj = maPathObj; pSave->maClipPath = maClipPath; mvSaveStack.push_back( pSave ); } void MtfTools::Pop() { // Get the latest data from the stack if( !mvSaveStack.empty() ) { // Backup the current data on the stack std::shared_ptr pSave( mvSaveStack.back() ); maLineStyle = pSave->aLineStyle; maFillStyle = pSave->aFillStyle; maFont = pSave->aFont; maTextColor = pSave->aTextColor; mnTextAlign = pSave->nTextAlign; mnTextLayoutMode = pSave->nTextLayoutMode; mnBkMode = pSave->nBkMode; mnGfxMode = pSave->nGfxMode; mnMapMode = pSave->nMapMode; maBkColor = pSave->aBkColor; mbFillStyleSelected = pSave->bFillStyleSelected; maActPos = pSave->aActPos; maXForm = pSave->aXForm; meRasterOp = pSave->eRasterOp; mnWinOrgX = pSave->nWinOrgX; mnWinOrgY = pSave->nWinOrgY; mnWinExtX = pSave->nWinExtX; mnWinExtY = pSave->nWinExtY; mnDevOrgX = pSave->nDevOrgX; mnDevOrgY = pSave->nDevOrgY; mnDevWidth = pSave->nDevWidth; mnDevHeight = pSave->nDevHeight; maPathObj = pSave->maPathObj; if ( ! ( maClipPath == pSave->maClipPath ) ) { maClipPath = pSave->maClipPath; mbClipNeedsUpdate = true; } if ( meLatestRasterOp != meRasterOp ) { mpGDIMetaFile->AddAction( new MetaRasterOpAction( meRasterOp ) ); meLatestRasterOp = meRasterOp; } mvSaveStack.pop_back(); } } void MtfTools::AddFromGDIMetaFile( GDIMetaFile& rGDIMetaFile ) { rGDIMetaFile.Play( *mpGDIMetaFile ); } void MtfTools::PassEMFPlusHeaderInfo() { EMFP_DEBUG(printf ("\t\t\tadd EMF_PLUS header info\n")); SvMemoryStream mem; sal_Int32 nLeft, nRight, nTop, nBottom; nLeft = mrclFrame.Left(); nTop = mrclFrame.Top(); nRight = mrclFrame.Right(); nBottom = mrclFrame.Bottom(); // emf header info mem.WriteInt32( nLeft ).WriteInt32( nTop ).WriteInt32( nRight ).WriteInt32( nBottom ); mem.WriteInt32( mnPixX ).WriteInt32( mnPixY ).WriteInt32( mnMillX ).WriteInt32( mnMillY ); float one, zero; one = 1; zero = 0; // add transformation matrix to be used in vcl's metaact.cxx for // rotate and scale operations mem.WriteFloat( one ).WriteFloat( zero ).WriteFloat( zero ).WriteFloat( one ).WriteFloat( zero ).WriteFloat( zero ); // need to flush the stream, otherwise GetEndOfData will return 0 // on windows where the function parameters are probably resolved in reverse order mem.Flush(); mpGDIMetaFile->AddAction( new MetaCommentAction( "EMF_PLUS_HEADER_INFO", 0, static_cast(mem.GetData()), mem.GetEndOfData() ) ); mpGDIMetaFile->UseCanvas( true ); } void MtfTools::PassEMFPlus( void const * pBuffer, sal_uInt32 nLength ) { EMFP_DEBUG(printf ("\t\t\tadd EMF_PLUS comment length %04x\n",(unsigned int) nLength)); mpGDIMetaFile->AddAction( new MetaCommentAction( "EMF_PLUS", 0, static_cast(pBuffer), nLength ) ); } } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */