/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#ifndef INCLUDED_SVX_SVDDRGMT_HXX
#define INCLUDED_SVX_SVDDRGMT_HXX

#include <svx/svddrgv.hxx>
#include <svx/svxdllapi.h>
#include <svx/sdr/contact/objectcontact.hxx>
#include <memory>

class SdrDragView;
class SdrDragStat;

class SAL_DLLPUBLIC_RTTI SdrDragEntry
{
private:
    bool                        mbAddToTransparent : 1;

protected:
    // access for derived classes
    void setAddToTransparent(bool bNew) { mbAddToTransparent = bNew; }

public:
    SdrDragEntry();
    virtual ~SdrDragEntry();

    virtual drawinglayer::primitive2d::Primitive2DContainer createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod, bool IsDragSizeValid=true) = 0;

    // data read access
    bool getAddToTransparent() const { return mbAddToTransparent; }
};


class SVXCORE_DLLPUBLIC SdrDragEntryPolyPolygon final : public SdrDragEntry
{
private:
    basegfx::B2DPolyPolygon             maOriginalPolyPolygon;

public:
    SdrDragEntryPolyPolygon(basegfx::B2DPolyPolygon aOriginalPolyPolygon);
    virtual ~SdrDragEntryPolyPolygon() override;

    virtual drawinglayer::primitive2d::Primitive2DContainer createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod, bool IsDragSizeValid=true) override;
};


class SdrDragEntrySdrObject final : public SdrDragEntry
{
private:
    const SdrObject&                                maOriginal;
    rtl::Reference<SdrObject>                       mxClone;
    bool                                            mbModify;

public:
    SdrDragEntrySdrObject(
        const SdrObject& rOriginal,
        bool bModify);
    virtual ~SdrDragEntrySdrObject() override;

    // #i54102# Split createPrimitive2DSequenceInCurrentState in prepareCurrentState and processing,
    // added accessors to original and clone
    void prepareCurrentState(SdrDragMethod& rDragMethod);
    const SdrObject& getOriginal() const { return maOriginal; }
    SdrObject* getClone() { return mxClone.get(); }

    virtual drawinglayer::primitive2d::Primitive2DContainer createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod, bool IsDragSizeValid=true) override;
};


class SdrDragEntryPrimitive2DSequence final : public SdrDragEntry
{
private:
    drawinglayer::primitive2d::Primitive2DContainer  maPrimitive2DSequence;

public:
    SdrDragEntryPrimitive2DSequence(drawinglayer::primitive2d::Primitive2DContainer&& rSequence);
    virtual ~SdrDragEntryPrimitive2DSequence() override;

    virtual drawinglayer::primitive2d::Primitive2DContainer createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod, bool IsDragSizeValid=true) override;
};


class SdrDragEntryPointGlueDrag final : public SdrDragEntry
{
private:
    std::vector< basegfx::B2DPoint >                maPositions;
    bool                                            mbIsPointDrag;

public:
    SdrDragEntryPointGlueDrag(std::vector< basegfx::B2DPoint >&& rPositions, bool bIsPointDrag);
    virtual ~SdrDragEntryPointGlueDrag() override;

    virtual drawinglayer::primitive2d::Primitive2DContainer createPrimitive2DSequenceInCurrentState(SdrDragMethod& rDragMethod, bool IsDragSizeValid=true) override;
};


class SVXCORE_DLLPUBLIC SdrDragMethod
{
private:
    std::vector< std::unique_ptr<SdrDragEntry> > maSdrDragEntries;
    sdr::overlay::OverlayObjectList         maOverlayObjectList;
    SdrDragView&                            mrSdrDragView;

    bool                                    mbMoveOnly : 1;
    bool                                    mbSolidDraggingActive : 1;
    bool                                    mbShiftPressed : 1;

protected:
    // access for derivated classes to maSdrDragEntries
    SAL_DLLPRIVATE void clearSdrDragEntries();
    void addSdrDragEntry(std::unique_ptr<SdrDragEntry> pNew);
    virtual void createSdrDragEntries();
    virtual void createSdrDragEntryForSdrObject(const SdrObject& rOriginal);

    // Helper to support inserting a new OverlayObject. It will do all
    // necessary stuff involved with that:
    // - add GridOffset for non-linear ViewToDevice transformation (calc)
    // - add to OverlayManager
    // - add to local OverlayObjectList - ownership change (!)
    // It is centralized here (and protected) to avoid that new usages/
    // implementations forget one of these needed steps.
    void insertNewlyCreatedOverlayObjectForSdrDragMethod(
        std::unique_ptr<sdr::overlay::OverlayObject> pOverlayObject,
        const sdr::contact::ObjectContact& rObjectContact,
        sdr::overlay::OverlayManager& rOverlayManager);

    // access for derivated classes to mrSdrDragView
    SdrDragView& getSdrDragView() { return mrSdrDragView; }
    const SdrDragView& getSdrDragView() const { return mrSdrDragView; }

    // access for derivated classes for bools
    void setMoveOnly(bool bNew) { mbMoveOnly = bNew; }
    void setSolidDraggingActive(bool bNew) { mbSolidDraggingActive = bNew; }

    // internal helpers for creation of standard drag entries
    SAL_DLLPRIVATE void createSdrDragEntries_SolidDrag();
    SAL_DLLPRIVATE void createSdrDragEntries_PolygonDrag();
    SAL_DLLPRIVATE void createSdrDragEntries_PointDrag();
    SAL_DLLPRIVATE void createSdrDragEntries_GlueDrag();

    // old call forwarders to the SdrDragView
    SAL_DLLPRIVATE OUString           ImpGetDescriptionStr(TranslateId pStrCacheID) const;
    SdrHdl*            GetDragHdl() const              { return getSdrDragView().mpDragHdl; }
    SdrHdlKind         GetDragHdlKind() const          { return getSdrDragView().meDragHdl; }
    SdrDragStat&       DragStat()                      { return getSdrDragView().maDragStat; }
    const SdrDragStat& DragStat() const                { return getSdrDragView().maDragStat; }
    Point&             Ref1() const                    { return mrSdrDragView.maRef1; }
    Point&             Ref2() const                    { return mrSdrDragView.maRef2; }
    const SdrHdlList&  GetHdlList() const              { return getSdrDragView().GetHdlList(); }
    void               AddUndo(std::unique_ptr<SdrUndoAction> pUndo) { getSdrDragView().AddUndo(std::move(pUndo)); }
    bool               IsDragLimit()                   { return getSdrDragView().mbDragLimit; }
    const tools::Rectangle&   GetDragLimitRect()              { return getSdrDragView().maDragLimit; }
    const SdrMarkList& GetMarkedObjectList()                   { return getSdrDragView().GetMarkedObjectList(); }
    Point              GetSnapPos(const Point& rPt) const { return getSdrDragView().GetSnapPos(rPt,getSdrDragView().mpMarkedPV); }
    SdrSnap            SnapPos(Point& rPt) const       { return getSdrDragView().SnapPos(rPt,getSdrDragView().mpMarkedPV); }
    inline const tools::Rectangle& GetMarkedRect() const;
    SAL_DLLPRIVATE SdrPageView*       GetDragPV() const;
    SdrObject*         GetDragObj() const;
    bool               IsDraggingPoints() const        { return getSdrDragView().IsDraggingPoints(); }
    bool               IsDraggingGluePoints() const    { return getSdrDragView().IsDraggingGluePoints(); }

    SAL_DLLPRIVATE bool DoAddConnectorOverlays();
    SAL_DLLPRIVATE drawinglayer::primitive2d::Primitive2DContainer AddConnectorOverlays();

public:

    SAL_DLLPRIVATE void resetSdrDragEntries();
    SAL_DLLPRIVATE basegfx::B2DRange getCurrentRange() const;

    // #i58950# also moved constructor implementation to cxx
    SdrDragMethod(SdrDragView& rNewView);

    // #i58950# virtual destructor was missing
    virtual ~SdrDragMethod();

    void Show(bool IsValidSize=true);
    void Hide();
    bool IsShiftPressed() const { return mbShiftPressed; }
    void SetShiftPressed(bool bShiftPressed) { mbShiftPressed = bShiftPressed; }
    virtual OUString GetSdrDragComment() const=0;
    virtual bool BeginSdrDrag()=0;
    virtual void MoveSdrDrag(const Point& rPnt)=0;
    virtual bool EndSdrDrag(bool bCopy)=0;
    virtual void CancelSdrDrag();
    virtual PointerStyle GetSdrDragPointer() const=0;

    virtual void CreateOverlayGeometry(
        sdr::overlay::OverlayManager& rOverlayManager,
        const sdr::contact::ObjectContact& rObjectContact, bool bIsGeometrySizeValid=true);
    SAL_DLLPRIVATE void destroyOverlayGeometry();

    virtual basegfx::B2DHomMatrix getCurrentTransformation() const;
    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget);
    virtual void applyCurrentTransformationToPolyPolygon(basegfx::B2DPolyPolygon& rTarget);

    // data read access
    bool getMoveOnly() const { return mbMoveOnly; }
    bool getSolidDraggingActive() const { return mbSolidDraggingActive; }
};

inline const tools::Rectangle& SdrDragMethod::GetMarkedRect() const
{
    return getSdrDragView().meDragHdl==SdrHdlKind::Poly ? getSdrDragView().GetMarkedPointsRect() :
           getSdrDragView().meDragHdl==SdrHdlKind::Glue ? getSdrDragView().GetMarkedGluePointsRect() :
           getSdrDragView().GetMarkedObjRect();
}


//   SdrDragMove

class SVXCORE_DLLPUBLIC SdrDragMove : public SdrDragMethod
{
private:
    tools::Long                        m_nBestXSnap;
    tools::Long                        m_nBestYSnap;
    bool                        m_bXSnapped;
    bool                        m_bYSnapped;

    void ImpCheckSnap(const Point& rPt);

protected:
    virtual void createSdrDragEntryForSdrObject(const SdrObject& rOriginal) override;

public:
    SdrDragMove(SdrDragView& rNewView);

    virtual OUString GetSdrDragComment() const override;
    virtual bool BeginSdrDrag() override;
    virtual void MoveSdrDrag(const Point& rPnt) override;
    virtual bool EndSdrDrag(bool bCopy) override;
    virtual PointerStyle GetSdrDragPointer() const override;

    virtual basegfx::B2DHomMatrix getCurrentTransformation() const override;
    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
};


//   SdrDragResize

class SVXCORE_DLLPUBLIC SdrDragResize : public SdrDragMethod
{
protected:
    Fraction                    aXFact;
    Fraction                    aYFact;

public:
    SdrDragResize(SdrDragView& rNewView);

    virtual OUString GetSdrDragComment() const override;
    virtual bool BeginSdrDrag() override;
    virtual void MoveSdrDrag(const Point& rPnt) override;
    virtual bool EndSdrDrag(bool bCopy) override;
    virtual PointerStyle GetSdrDragPointer() const override;

    virtual basegfx::B2DHomMatrix getCurrentTransformation() const override;
    virtual void applyCurrentTransformationToSdrObject(SdrObject& rTarget) override;
};


//   SdrDragObjOwn

class SVXCORE_DLLPUBLIC SdrDragObjOwn : public SdrDragMethod
{
private:
    // SdrDragObjOwn always works on a clone since it has no transformation
    // mechanism to modify wireframe visualisations, but uses the
    // SdrObject::applySpecialDrag() method to change a clone of the
    // SdrObject
    rtl::Reference<SdrObject>               mxClone;

protected:
    virtual void createSdrDragEntries() override;

public:
    SdrDragObjOwn(SdrDragView& rNewView);
    virtual ~SdrDragObjOwn() override;

    virtual OUString GetSdrDragComment() const override;
    virtual bool BeginSdrDrag() override;
    virtual void MoveSdrDrag(const Point& rPnt) override;
    virtual bool EndSdrDrag(bool bCopy) override;
    virtual PointerStyle GetSdrDragPointer() const override;
};

#endif // INCLUDED_SVX_SVDDRGMT_HXX

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */