/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #ifndef INCLUDED_VCL_PRINT_HXX #define INCLUDED_VCL_PRINT_HXX #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include class SalInfoPrinter; struct SalPrinterQueueInfo; class SalPrinter; class VirtualDevice; class Window; namespace vcl { class PrinterController; class PrintDialog; } // - Printer-Types - #define PAGEQUEUE_ALLPAGES 0xFFFF enum PrinterSupport { SUPPORT_SET_ORIENTATION, SUPPORT_SET_PAPERBIN, SUPPORT_SET_PAPERSIZE, SUPPORT_SET_PAPER, SUPPORT_COPY, SUPPORT_COLLATECOPY, SUPPORT_SETUPDIALOG, SUPPORT_FAX, SUPPORT_PDF }; // - PrinterPage - class VCL_DLLPUBLIC PrinterPage { GDIMetaFile* mpMtf; JobSetup maJobSetup; bool mbNewJobSetup; public: PrinterPage() : mpMtf( new GDIMetaFile() ) {} PrinterPage( GDIMetaFile* pMtf, bool bNewJobSetup, const JobSetup& rSetup ) : mpMtf( pMtf ), maJobSetup( rSetup ), mbNewJobSetup( bNewJobSetup ) {} ~PrinterPage() { delete mpMtf; } GDIMetaFile* GetGDIMetaFile() const { return mpMtf; } const JobSetup& GetJobSetup() const { return maJobSetup; } bool IsNewJobSetup() const { return mbNewJobSetup; } }; // - QueueInfo - class VCL_DLLPUBLIC QueueInfo { friend class Printer; private: OUString maPrinterName; OUString maDriver; OUString maLocation; OUString maComment; sal_uInt32 mnStatus; sal_uInt32 mnJobs; public: QueueInfo(); QueueInfo( const QueueInfo& rInfo ); ~QueueInfo(); const OUString& GetPrinterName() const { return maPrinterName; } const OUString& GetDriver() const { return maDriver; } const OUString& GetLocation() const { return maLocation; } const OUString& GetComment() const { return maComment; } sal_uInt32 GetStatus() const { return mnStatus; } sal_uInt32 GetJobs() const { return mnJobs; } bool operator==( const QueueInfo& rInfo ) const; friend VCL_DLLPUBLIC SvStream& ReadQueueInfo( SvStream& rIStream, QueueInfo& rInfo ); friend VCL_DLLPUBLIC SvStream& WriteQueueInfo( SvStream& rOStream, const QueueInfo& rInfo ); }; // - PrinterOptions - enum PrinterTransparencyMode { PRINTER_TRANSPARENCY_AUTO = 0, PRINTER_TRANSPARENCY_NONE = 1 }; enum PrinterGradientMode { PRINTER_GRADIENT_STRIPES = 0, PRINTER_GRADIENT_COLOR = 1 }; enum PrinterBitmapMode { PRINTER_BITMAP_OPTIMAL = 0, PRINTER_BITMAP_NORMAL = 1, PRINTER_BITMAP_RESOLUTION = 2 }; class VCL_DLLPUBLIC PrinterOptions { private: bool mbReduceTransparency; PrinterTransparencyMode meReducedTransparencyMode; bool mbReduceGradients; PrinterGradientMode meReducedGradientsMode; sal_uInt16 mnReducedGradientStepCount; bool mbReduceBitmaps; PrinterBitmapMode meReducedBitmapMode; sal_uInt16 mnReducedBitmapResolution; bool mbReducedBitmapsIncludeTransparency; bool mbConvertToGreyscales; bool mbPDFAsStandardPrintJobFormat; public: PrinterOptions(); ~PrinterOptions(); bool IsReduceTransparency() const { return mbReduceTransparency; } void SetReduceTransparency( bool bSet ) { mbReduceTransparency = bSet; } PrinterTransparencyMode GetReducedTransparencyMode() const { return meReducedTransparencyMode; } void SetReducedTransparencyMode( PrinterTransparencyMode eMode ) { meReducedTransparencyMode = eMode; } bool IsReduceGradients() const { return mbReduceGradients; } void SetReduceGradients( bool bSet ) { mbReduceGradients = bSet; } PrinterGradientMode GetReducedGradientMode() const { return meReducedGradientsMode; } void SetReducedGradientMode( PrinterGradientMode eMode ) { meReducedGradientsMode = eMode; } sal_uInt16 GetReducedGradientStepCount() const { return mnReducedGradientStepCount; } void SetReducedGradientStepCount( sal_uInt16 nStepCount ) { mnReducedGradientStepCount = nStepCount; } bool IsReduceBitmaps() const { return mbReduceBitmaps; } void SetReduceBitmaps( bool bSet ) { mbReduceBitmaps = bSet; } PrinterBitmapMode GetReducedBitmapMode() const { return meReducedBitmapMode; } void SetReducedBitmapMode( PrinterBitmapMode eMode ) { meReducedBitmapMode = eMode; } sal_uInt16 GetReducedBitmapResolution() const { return mnReducedBitmapResolution; } void SetReducedBitmapResolution( sal_uInt16 nResolution ) { mnReducedBitmapResolution = nResolution; } bool IsReducedBitmapIncludesTransparency() const { return mbReducedBitmapsIncludeTransparency; } void SetReducedBitmapIncludesTransparency( bool bSet ) { mbReducedBitmapsIncludeTransparency = bSet; } bool IsConvertToGreyscales() const { return mbConvertToGreyscales; } void SetConvertToGreyscales( bool bSet ) { mbConvertToGreyscales = bSet; } bool IsPDFAsStandardPrintJobFormat() const { return mbPDFAsStandardPrintJobFormat; } void SetPDFAsStandardPrintJobFormat( bool bSet ) { mbPDFAsStandardPrintJobFormat = bSet; } // read printer options from configuration, parameter decides whether the set for // print "to printer" or "to file" should be read. // returns true if config was read, false if an error occurred bool ReadFromConfig( bool bFile ); }; // - Printer - class VCL_DLLPUBLIC Printer : public OutputDevice { friend class OutputDevice; private: SalInfoPrinter* mpInfoPrinter; SalPrinter* mpPrinter; SalGraphics* mpJobGraphics; Printer* mpPrev; Printer* mpNext; VirtualDevice* mpDisplayDev; PrinterOptions* mpPrinterOptions; OUString maPrinterName; OUString maDriver; OUString maPrintFile; OUString maJobName; JobSetup maJobSetup; Point maPageOffset; Size maPaperSize; sal_uLong mnError; sal_uInt16 mnCurPage; sal_uInt16 mnCurPrintPage; sal_uInt16 mnPageQueueSize; sal_uInt16 mnCopyCount; bool mbDefPrinter; bool mbPrinting; bool mbJobActive; bool mbCollateCopy; bool mbPrintFile; bool mbInPrintPage; bool mbNewJobSetup; bool mbIsQueuePrinter; bool mbUserSetupCompleted; bool mbUserSetupResult; Link maErrorHdl; bool ImplInitGraphics() const SAL_OVERRIDE; void ImplReleaseGraphics( bool bRelease = true ) SAL_OVERRIDE; void ImplReleaseFonts() SAL_OVERRIDE; SAL_DLLPRIVATE void ImplInitData(); SAL_DLLPRIVATE void ImplInit( SalPrinterQueueInfo* pInfo ); SAL_DLLPRIVATE void ImplInitDisplay( const Window* pWindow ); SAL_DLLPRIVATE static SalPrinterQueueInfo* ImplGetQueueInfo( const OUString& rPrinterName, const OUString* pDriver ); SAL_DLLPRIVATE void ImplUpdatePageData(); SAL_DLLPRIVATE void ImplUpdateFontList(); SAL_DLLPRIVATE void ImplFindPaperFormatForUserSize( JobSetup&, bool bMatchNearest ); SAL_DLLPRIVATE bool StartJob( const OUString& rJobName, boost::shared_ptr& ); static SAL_DLLPRIVATE sal_uLong ImplSalPrinterErrorCodeToVCL( sal_uLong nError ); private: SAL_DLLPRIVATE bool EndJob(); SAL_DLLPRIVATE Printer( const Printer& rPrinter ); SAL_DLLPRIVATE Printer& operator =( const Printer& rPrinter ); public: SAL_DLLPRIVATE void ImplStartPage(); SAL_DLLPRIVATE void ImplEndPage(); protected: long ImplGetGradientStepCount( long nMinRect ) SAL_OVERRIDE; void ScaleBitmap ( Bitmap&, SalTwoRect& ) SAL_OVERRIDE { }; public: void DrawGradientEx( OutputDevice* pOut, const Rectangle& rRect, const Gradient& rGradient ); protected: void SetSelfAsQueuePrinter( bool bQueuePrinter ) { mbIsQueuePrinter = bQueuePrinter; } bool IsQueuePrinter() const { return mbIsQueuePrinter; } virtual void ImplPrintMask ( const Bitmap& rMask, const Color& rMaskColor, const Point& rDestPt, const Size& rDestSize, const Point& rSrcPtPixel, const Size& rSrcSizePixel ) SAL_OVERRIDE; bool DrawTransformBitmapExDirect( const basegfx::B2DHomMatrix& aFullTransform, const BitmapEx& rBitmapEx) SAL_OVERRIDE; bool TransformReduceBitmapExTargetRange( const basegfx::B2DHomMatrix& aFullTransform, basegfx::B2DRange &aVisibleRange, double &fMaximumArea) SAL_OVERRIDE; void DrawDeviceBitmap( const Point& rDestPt, const Size& rDestSize, const Point& rSrcPtPixel, const Size& rSrcSizePixel, BitmapEx& rBitmapEx ); public: Printer(); Printer( const JobSetup& rJobSetup ); Printer( const QueueInfo& rQueueInfo ); Printer( const OUString& rPrinterName ); virtual ~Printer(); static const std::vector< OUString >& GetPrinterQueues(); static const QueueInfo* GetQueueInfo( const OUString& rPrinterName, bool bStatusUpdate ); static OUString GetDefaultPrinterName(); virtual void Error(); const OUString& GetName() const { return maPrinterName; } const OUString& GetDriverName() const { return maDriver; } bool IsDefPrinter() const { return mbDefPrinter; } bool IsDisplayPrinter() const { return mpDisplayDev != NULL; } bool IsValid() const { return !IsDisplayPrinter(); } sal_uLong GetCapabilities( sal_uInt16 nType ) const; bool HasSupport( PrinterSupport eFeature ) const; bool SetJobSetup( const JobSetup& rSetup ); const JobSetup& GetJobSetup() const { return maJobSetup; } bool Setup( Window* pWindow = NULL ); bool SetPrinterProps( const Printer* pPrinter ); // SetPrinterOptions is used internally only now // in earlier times it was used only to set the options loaded directly from the configuration // in SfxPrinter::InitJob, this is now handled internally // should the need arise to set the printer options outside vcl, also a method would have to be devised // to not override these again internally SAL_DLLPRIVATE void SetPrinterOptions( const PrinterOptions& rOptions ); const PrinterOptions& GetPrinterOptions() const { return( *mpPrinterOptions ); } bool SetOrientation( Orientation eOrient ); Orientation GetOrientation() const; bool SetDuplexMode( DuplexMode ); // returns the angle that a landscape page will be turned counterclockwise // wrt to portrait. The return value may be only valid for // the current paper int GetLandscapeAngle() const; bool SetPaperBin( sal_uInt16 nPaperBin ); sal_uInt16 GetPaperBin() const; bool SetPaper( Paper ePaper ); bool SetPaperSizeUser( const Size& rSize ); bool SetPaperSizeUser( const Size& rSize, bool bMatchNearest ); Paper GetPaper() const; static OUString GetPaperName( Paper ePaper ); // return a UI string for the current paper; i_bPaperUser == false means an empty string for PAPER_USER OUString GetPaperName( bool i_bPaperUser = true ) const; // returns number of available paper formats int GetPaperInfoCount() const; // returns info about paper format nPaper const PaperInfo& GetPaperInfo( int nPaper ) const; sal_uInt16 GetPaperBinCount() const; OUString GetPaperBinName( sal_uInt16 nPaperBin ) const; const Size& GetPaperSizePixel() const { return maPaperSize; } Size GetPaperSize() const { return PixelToLogic( maPaperSize ); } const Point& GetPageOffsetPixel() const { return maPageOffset; } Point GetPageOffset() const { return PixelToLogic( maPageOffset ); } bool SetCopyCount( sal_uInt16 nCopy, bool bCollate = false ); sal_uInt16 GetCopyCount() const { return mnCopyCount; } bool IsCollateCopy() const { return mbCollateCopy; } bool IsPrinting() const { return mbPrinting; } const OUString& GetCurJobName() const { return maJobName; } sal_uInt16 GetCurPage() const { return mnCurPage; } bool IsJobActive() const { return mbJobActive; } sal_uLong GetError() const { return ERRCODE_TOERROR(mnError); } sal_uLong GetErrorCode() const { return mnError; } void SetErrorHdl( const Link& rLink ) { maErrorHdl = rLink; } const Link& GetErrorHdl() const { return maErrorHdl; } /** checks the printer list and updates it necessary * * sends a DataChanged event of type DATACHANGED_PRINTER * if the printer list changed */ static void updatePrinters(); /** execute a print job starts a print job asynchronously (that is will return */ static void PrintJob( const boost::shared_ptr& i_pController, const JobSetup& i_rInitSetup ); virtual bool HasMirroredGraphics() const SAL_OVERRIDE; virtual void DrawOutDev( const Point& rDestPt, const Size& rDestSize, const Point& rSrcPt, const Size& rSrcSize ) SAL_OVERRIDE; virtual void DrawOutDev( const Point& rDestPt, const Size& rDestSize, const Point& rSrcPt, const Size& rSrcSize, const OutputDevice& rOutDev ) SAL_OVERRIDE; virtual void CopyArea( const Point& rDestPt, const Point& rSrcPt, const Size& rSrcSize, sal_uInt16 nFlags = 0 ) SAL_OVERRIDE; // implementation detail of PrintJob being asynchronous // not exported, not usable outside vcl static void SAL_DLLPRIVATE ImplPrintJob( const boost::shared_ptr& i_pController, const JobSetup& i_rInitSetup ); }; namespace vcl { class ImplPrinterControllerData; class VCL_DLLPUBLIC PrinterController { ImplPrinterControllerData* mpImplData; protected: PrinterController( const boost::shared_ptr& ); public: enum NupOrderType { LRTB, TBLR, TBRL, RLTB }; struct MultiPageSetup { // all metrics in 100th mm int nRows; int nColumns; int nRepeat; Size aPaperSize; long nLeftMargin; long nTopMargin; long nRightMargin; long nBottomMargin; long nHorizontalSpacing; long nVerticalSpacing; bool bDrawBorder; PrinterController::NupOrderType nOrder; MultiPageSetup() : nRows( 1 ), nColumns( 1 ), nRepeat( 1 ), aPaperSize( 21000, 29700 ) , nLeftMargin( 0 ), nTopMargin( 0 ) , nRightMargin( 0 ), nBottomMargin( 0 ) , nHorizontalSpacing( 0 ), nVerticalSpacing( 0 ) , bDrawBorder( false ) , nOrder( LRTB ) { } }; struct PageSize { Size aSize; // in 100th mm bool bFullPaper; // full paper, not only imageable area is printed PageSize( const Size& i_rSize = Size( 21000, 29700 ), bool i_bFullPaper = false ) : aSize( i_rSize ), bFullPaper( i_bFullPaper ) {} }; virtual ~PrinterController(); const boost::shared_ptr& getPrinter() const; /* for implementations: get current job properties as changed by e.g. print dialog this gets the current set of properties initially told to Printer::PrintJob For convenience a second sequence will be merged in to get a combined sequence. In case of duplicate property names, the value of i_MergeList wins. */ css::uno::Sequence< css::beans::PropertyValue > getJobProperties( const css::uno::Sequence< css::beans::PropertyValue >& i_rMergeList ) const; /* get the PropertyValue of a Property */ css::beans::PropertyValue* getValue( const OUString& i_rPropertyName ); const css::beans::PropertyValue* getValue( const OUString& i_rPropertyName ) const; /* get a bool property in case the property is unknown or not convertible to bool, i_bFallback is returned */ bool getBoolProperty( const OUString& i_rPropertyName, bool i_bFallback ) const; /* get an int property in case the property is unknown or not convertible to bool, i_nFallback is returned */ sal_Int32 getIntProperty( const OUString& i_rPropertyName, sal_Int32 i_nFallback ) const; /* set a property value - can also be used to add another UI property */ void setValue( const OUString& i_rPropertyName, const css::uno::Any& i_rValue ); void setValue( const css::beans::PropertyValue& i_rValue ); /* return the currently active UI options. These are the same that were passed to setUIOptions. */ const css::uno::Sequence< css::beans::PropertyValue >& getUIOptions() const; /* set possible UI options. should only be done once before passing the PrinterListener to Printer::PrintJob */ void setUIOptions( const css::uno::Sequence< css::beans::PropertyValue >& ); /* enable/disable an option; this can be used to implement dialog logic. */ bool isUIOptionEnabled( const OUString& rPropName ) const; bool isUIChoiceEnabled( const OUString& rPropName, sal_Int32 nChoice ) const; /* returns the property name rPropName depends on or an empty string if no dependency exists. */ OUString getDependency( const OUString& rPropName ) const; /* makeEnabled will chage the property rPropName depends on to the value that makes rPropName enabled. If the dependency itself is also disabled, no action will be performed. returns the property name rPropName depends on or an empty string if no change was made. */ OUString makeEnabled( const OUString& rPropName ); virtual int getPageCount() const = 0; // must be overloaded by the app /* get the page parameters, namely the jobsetup that should be active for the page (describing among others the physical page size) and the "page size". In writer case this would probably be the same as the JobSetup since writer sets the page size draw/impress for example print their page on the paper set on the printer, possibly adjusting the page size to fit. That means the page size can be different from the paper size. */ // must be overloaded by the app, return page size in 1/100th mm virtual css::uno::Sequence< css::beans::PropertyValue > getPageParameters( int i_nPage ) const = 0; virtual void printPage( int i_nPage ) const = 0; // must be overloaded by the app virtual void jobStarted(); // will be called after a possible dialog has been shown and the real printjob starts virtual void jobFinished( com::sun::star::view::PrintableState ); com::sun::star::view::PrintableState getJobState() const; void abortJob(); bool isShowDialogs() const; bool isDirectPrint() const; // implementation details, not usable outside vcl // don't use outside vcl. Some of these are exported for // the benefit of vcl's plugins. // Still: DO NOT USE OUTSIDE VCL VCL_PLUGIN_PUBLIC int getFilteredPageCount(); SAL_DLLPRIVATE PageSize getPageFile( int i_inUnfilteredPage, GDIMetaFile& rMtf, bool i_bMayUseCache = false ); VCL_PLUGIN_PUBLIC PageSize getFilteredPageFile( int i_nFilteredPage, GDIMetaFile& o_rMtf, bool i_bMayUseCache = false ); VCL_PLUGIN_PUBLIC void printFilteredPage( int i_nPage ); SAL_DLLPRIVATE void setPrinter( const boost::shared_ptr& ); SAL_DLLPRIVATE void setOptionChangeHdl( const Link& ); VCL_PLUGIN_PUBLIC void createProgressDialog(); VCL_PLUGIN_PUBLIC bool isProgressCanceled() const; SAL_DLLPRIVATE void setMultipage( const MultiPageSetup& ); SAL_DLLPRIVATE const MultiPageSetup& getMultipage() const; VCL_PLUGIN_PUBLIC void setLastPage( bool i_bLastPage ); SAL_DLLPRIVATE void setReversePrint( bool i_bReverse ); SAL_DLLPRIVATE bool getReversePrint() const; SAL_DLLPRIVATE void setPapersizeFromSetup( bool i_bPapersizeFromSetup ); SAL_DLLPRIVATE bool getPapersizeFromSetup() const; SAL_DLLPRIVATE void pushPropertiesToPrinter(); SAL_DLLPRIVATE void resetPaperToLastConfigured(); VCL_PLUGIN_PUBLIC void setJobState( com::sun::star::view::PrintableState ); SAL_DLLPRIVATE bool setupPrinter( Window* i_pDlgParent ); SAL_DLLPRIVATE int getPageCountProtected() const; SAL_DLLPRIVATE css::uno::Sequence< css::beans::PropertyValue > getPageParametersProtected( int i_nPage ) const; SAL_DLLPRIVATE sal_uLong removeTransparencies( GDIMetaFile& i_rIn, GDIMetaFile& o_rOut ); SAL_DLLPRIVATE void resetPrinterOptions( bool i_bFileOutput ); }; class VCL_DLLPUBLIC PrinterOptionsHelper { protected: boost::unordered_map< OUString, css::uno::Any, OUStringHash > m_aPropertyMap; css::uno::Sequence< css::beans::PropertyValue > m_aUIProperties; public: PrinterOptionsHelper() {} // create without ui properties PrinterOptionsHelper( const css::uno::Sequence< css::beans::PropertyValue >& i_rUIProperties ) : m_aUIProperties( i_rUIProperties ) {} ~PrinterOptionsHelper() {} /* process a new set of properties * merges changed properties and returns "true" if any occurred * if the optional output set is not NULL then the names of the changed properties are returned **/ bool processProperties( const css::uno::Sequence< css::beans::PropertyValue >& i_rNewProp, std::set< OUString >* o_pChangeProp = NULL ); /* append to a sequence of property values the ui property sequence passed at creation * as the "ExtraPrintUIOptions" property. if that sequence was empty, no "ExtraPrintUIOptions" property * will be appended. **/ void appendPrintUIOptions( css::uno::Sequence< css::beans::PropertyValue >& io_rProps ) const; // returns an empty Any for not existing properties css::uno::Any getValue( const OUString& i_rPropertyName ) const; bool getBoolValue( const OUString& i_rPropertyName, bool i_bDefault = false ) const; // convenience for fixed strings bool getBoolValue( const char* i_pPropName, bool i_bDefault = false ) const { return getBoolValue( OUString::createFromAscii( i_pPropName ), i_bDefault ); } sal_Int64 getIntValue( const OUString& i_rPropertyName, sal_Int64 i_nDefault = 0 ) const; // convenience for fixed strings sal_Int64 getIntValue( const char* i_pPropName, sal_Int64 i_nDefault = 0 ) const { return getIntValue( OUString::createFromAscii( i_pPropName ), i_nDefault ); } OUString getStringValue( const OUString& i_rPropertyName, const OUString& i_rDefault = OUString() ) const; // convenience for fixed strings OUString getStringValue( const char* i_pPropName, const OUString& i_rDefault = OUString() ) const { return getStringValue( OUString::createFromAscii( i_pPropName ), i_rDefault ); } // helper functions for user to create a single control struct UIControlOptions { OUString maDependsOnName; sal_Int32 mnDependsOnEntry; bool mbAttachToDependency; OUString maGroupHint; bool mbInternalOnly; bool mbEnabled; css::uno::Sequence< css::beans::PropertyValue > maAddProps; UIControlOptions( const OUString& i_rDependsOnName = OUString(), sal_Int32 i_nDependsOnEntry = -1, bool i_bAttachToDependency = false, const OUString& i_rGroupHint = OUString(), bool i_bInternalOnly = false, bool i_bEnabled = true ) : maDependsOnName( i_rDependsOnName ) , mnDependsOnEntry( i_nDependsOnEntry ) , mbAttachToDependency( i_bAttachToDependency ) , maGroupHint( i_rGroupHint ) , mbInternalOnly( i_bInternalOnly ) , mbEnabled( i_bEnabled ) {} }; // note: in the following helper functions HelpIds are expected as an OUString // the normal HelpId form is OString (byte string instead of UTF16 string) // this is because the whole interface is base on UNO properties; in fact the structures // are passed over UNO interfaces. UNO does not know a byte string, hence the string is // transported via UTF16 strings. // Show general control static css::uno::Any setUIControlOpt( const css::uno::Sequence< OUString >& i_rIDs, const OUString& i_rTitle, const css::uno::Sequence< OUString >& i_rHelpId, const OUString& i_rType, const css::beans::PropertyValue* i_pValue = NULL, const UIControlOptions& i_rControlOptions = UIControlOptions() ); // Show and set the title of a TagPage of id i_rID static css::uno::Any setGroupControlOpt(const OUString& i_rID, const OUString& i_rTitle, const OUString& i_rHelpId); // Show and set the label of a VclFrame of id i_rID static css::uno::Any setSubgroupControlOpt(const OUString& i_rID, const OUString& i_rTitle, const OUString& i_rHelpId, const UIControlOptions& i_rControlOptions = UIControlOptions()); // Show a bool option as a checkbox static css::uno::Any setBoolControlOpt(const OUString& i_rID, const OUString& i_rTitle, const OUString& i_rHelpId, const OUString& i_rProperty, bool i_bValue, const UIControlOptions& i_rControlOptions = UIControlOptions()); // Show a set of choices in a list box static css::uno::Any setChoiceListControlOpt(const OUString& i_rID, const OUString& i_rTitle, const css::uno::Sequence< OUString >& i_rHelpId, const OUString& i_rProperty, const css::uno::Sequence< OUString >& i_rChoices, sal_Int32 i_nValue, const css::uno::Sequence< sal_Bool >& i_rDisabledChoices = css::uno::Sequence< sal_Bool >(), const UIControlOptions& i_rControlOptions = UIControlOptions()); // show a set of choices as radio buttons static css::uno::Any setChoiceRadiosControlOpt(const css::uno::Sequence< OUString >& i_rIDs, const OUString& i_rTitle, const css::uno::Sequence< OUString >& i_rHelpId, const OUString& i_rProperty, const css::uno::Sequence< OUString >& i_rChoices, sal_Int32 i_nValue, const css::uno::Sequence< sal_Bool >& i_rDisabledChoices = css::uno::Sequence< sal_Bool >(), const UIControlOptions& i_rControlOptions = UIControlOptions()); // show an integer range (e.g. a spin field) // note: max value < min value means do not apply min/max values static css::uno::Any setRangeControlOpt(const OUString& i_rID, const OUString& i_rTitle, const OUString& i_rHelpId, const OUString& i_rProperty, sal_Int32 i_nValue, sal_Int32 i_nMinValue = -1, sal_Int32 i_nMaxValue = -2, const UIControlOptions& i_rControlOptions = UIControlOptions()); // show a string field // note: max value < min value means do not apply min/max values static css::uno::Any setEditControlOpt(const OUString& i_rID, const OUString& i_rTitle, const OUString& i_rHelpId, const OUString& i_rProperty, const OUString& i_rValue, const UIControlOptions& i_rControlOptions = UIControlOptions()); }; } #endif // INCLUDED_VCL_PRINT_HXX /* vim:set shiftwidth=4 softtabstop=4 expandtab: */