| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I9f399b3752da9df930e0647536ffcd4e82beb1ac
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/167856
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
See tdf#42949 for motivation
Change-Id: I6b4b05a5e59b256653c4caf5297fffd601b45083
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/128845
Tested-by: Jenkins
Reviewed-by: Thorsten Behrens <thorsten.behrens@allotropia.de>
|
|
...instead of by listing the content somewhat redundantly in the Rdb_*.mk
files, to avoid duplication of logic for components that are only built
conditionally (and thus should only be included conditionally in the
corresponding Rdb). To achieve that, add an "rdb" parameter to
gb_ComponentTarget_ComponentTarget (and to the gb_*_set_componentfile macros
that internally call gb_ComponentTarget_ComponentTarget), which is used to make
the appropriate gb_Rdb_add_component call internally from within
gb_ComponentTarget_ComponentTarget. (As a special case,
gb_CppunitTest_set_componentfile shall not call gb_Rdb_add_component, as that
has already been done by the corresponding gb_Library_set_componentfile call, so
allow the gb_ComponentTarget_ComponentTarget "rdb" parameter to be empty to
support that special case.)
Most Rdb_*.mk files are thus mostly empty now. One exception is
i18npool/Rdb_saxparser.mk, which duplicates some of the Rdb_services content as
needed during the build in CustomTarget_i18npool/localedata.
1c9a40299d328c78c035ca63ccdf22c5c669a03b "gbuild: create services.rdb from built
components" had already tried to do something similar (in addition to other
things) under a new --enable-services-rdb-from-build option. However, that
approach had four drawbacks that this approach here addresses (and which thus
partly reverts 1c9a40299d328c78c035ca63ccdf22c5c669a03b):
1 Rdb_services shall not contain the component files of all libraries that are
built. While that commit filtered out the component files that go into
Rdb_ure/services (ure/Rdb_ure.mk), it failed to filter out the component files
that go into others like Rdb_postgresql-sdbc
(connectivity/Rdb_postgresql-sdbc.mk).
2 The code added by that commit to Makefile.gbuild codified the knowledge that
there is an Rdb_services, which is brittle.
3 The code added by that commit to solenv/gbuild/Rdb.mk codified the knowledge
(for gb_Rdb__URECOMPONENTS) that there is an Rdb_ure/services, which is brittle.
4 Introducing an --enable-services-rdb-from-build option needlessly provided
two different ways how the content of Rdb_services is assembled.
The changes done here would leave --enable-services-rdb-from-build as a
misnomer, as it no longer controls how Rdb_services is assembled. I thus
renamed it to --enable-customtarget-components, as that is apparently what it
still does now.
Change-Id: Ia5e8df4b640146c77421fcec6daa11a9cd260265
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/126577
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Previously, all of the README files have been renamed to README.md
and now, the contents of these files were changed to use Markdown
format. Other than format inconsistency, some README.md files lacked
information about modules, or were out of date. By using LibreOffice
/ OpenOffice wiki and other documentation websites, these files were
updated. Now every README.md file has a title, and some description.
The top-level README.md file is changed to add links to the modules.
The result of processing the Markdown format README.md files can be
seen at: https://docs.libreoffice.org/
Change-Id: Ic3b0c3c064a2498d6a435253b041df010cd7797a
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/113424
Tested-by: Jenkins
Reviewed-by: Michael Stahl <michael.stahl@allotropia.de>
Reviewed-by: Adolfo Jayme Barrientos <fitojb@ubuntu.com>
|
|
Renaming all README files for all top level modules to README.md,
applying no content change at this stage to be able to track history
of the files. These files should be edited to use correct Markdown
syntax later.
Change-Id: I542fa3f3d32072156f16eaad2211a397cc212665
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/112977
Tested-by: Jenkins
Reviewed-by: Christian Lohmaier <lohmaier+LibreOffice@googlemail.com>
|
|
See tdf#74608 for motivation.
Change-Id: I4e33b22fa8294d730e1efa929c352c1aefe506a1
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/98679
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I0204c51f456aa500d9132d4fa4fd877df0c2c442
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/97634
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: Iffb8512c530b33f87076aec9f85b45219c7d07e5
Reviewed-on: https://gerrit.libreoffice.org/c/core/+/87528
Tested-by: Jenkins
Reviewed-by: Muhammet Kara <muhammet.kara@collabora.com>
|
|
Change-Id: I6d32942960a5e997f16eb1301c45495661cd4cea
Reviewed-on: https://gerrit.libreoffice.org/85514
Tested-by: Jenkins
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
...following up on 314f15bff08b76bf96acf99141776ef64d2f1355 "Extend
loplugin:external to warn about enums".
Cases where free functions were moved into an unnamed namespace along with a
class, to not break ADL, are in:
filter/source/svg/svgexport.cxx
sc/source/filter/excel/xelink.cxx
sc/source/filter/excel/xilink.cxx
svx/source/sdr/contact/viewobjectcontactofunocontrol.cxx
All other free functions mentioning moved classes appear to be harmless and not
give rise to (silent, even) ADL breakage. (One remaining TODO in
compilerplugins/clang/external.cxx is that derived classes are not covered by
computeAffectedTypes, even though they could also be affected by ADL-breakage---
but don't seem to be in any acutal case across the code base.)
For friend declarations using elaborate type specifiers, like
class C1 {};
class C2 { friend class C1; };
* If C2 (but not C1) is moved into an unnamed namespace, the friend declaration
must be changed to not use an elaborate type specifier (i.e., "friend C1;"; see
C++17 [namespace.memdef]/3: "If the name in a friend declaration is neither
qualified nor a template-id and the declaration is a function or an
elaborated-type-specifier, the lookup to determine whether the entity has been
previously declared shall not consider any scopes outside the innermost
enclosing namespace.")
* If C1 (but not C2) is moved into an unnamed namespace, the friend declaration
must be changed too, see <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71882>
"elaborated-type-specifier friend not looked up in unnamed namespace".
Apart from that, to keep changes simple and mostly mechanical (which should help
avoid regressions), out-of-line definitions of class members have been left in
the enclosing (named) namespace. But explicit specializations of class
templates had to be moved into the unnamed namespace to appease
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=92598> "explicit specialization of
template from unnamed namespace using unqualified-id in enclosing namespace".
Also, accompanying declarations (of e.g. typedefs or static variables) that
could arguably be moved into the unnamed namespace too have been left alone.
And in some cases, mention of affected types in blacklists in other loplugins
needed to be adapted.
And sc/qa/unit/mark_test.cxx uses a hack of including other .cxx, one of which
is sc/source/core/data/segmenttree.cxx where e.g. ScFlatUInt16SegmentsImpl is
not moved into an unnamed namespace (because it is declared in
sc/inc/segmenttree.hxx), but its base ScFlatSegmentsImpl is. GCC warns about
such combinations with enabled-by-default -Wsubobject-linkage, but "The compiler
doesn’t give this warning for types defined in the main .C file, as those are
unlikely to have multiple definitions."
(<https://gcc.gnu.org/onlinedocs/gcc-9.2.0/gcc/Warning-Options.html>) The
warned-about classes also don't have multiple definitions in the given test, so
disable the warning when including the .cxx.
Change-Id: Ib694094c0d8168be68f8fe90dfd0acbb66a3f1e4
Reviewed-on: https://gerrit.libreoffice.org/83239
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: Iaa023a81be7b28079fbbbf593f6a5757daf70495
Reviewed-on: https://gerrit.libreoffice.org/76658
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...warning about (for now only) functions and variables with external linkage
that likely don't need it.
The problems with moving entities into unnamed namespacs and breaking ADL
(as alluded to in comments in compilerplugins/clang/external.cxx) are
illustrated by the fact that while
struct S1 { int f() { return 0; } };
int f(S1 s) { return s.f(); }
namespace N {
struct S2: S1 { int f() { return 1; } };
int f(S2 s) { return s.f(); }
}
int main() { return f(N::S2()); }
returns 1, both moving just the struct S2 into an nunnamed namespace,
struct S1 { int f() { return 0; } };
int f(S1 s) { return s.f(); }
namespace N {
namespace { struct S2: S1 { int f() { return 1; } }; }
int f(S2 s) { return s.f(); }
}
int main() { return f(N::S2()); }
as well as moving just the function f overload into an unnamed namespace,
struct S1 { int f() { return 0; } };
int f(S1 s) { return s.f(); }
namespace N {
struct S2: S1 { int f() { return 1; } };
namespace { int f(S2 s) { return s.f(); } }
}
int main() { return f(N::S2()); }
would each change the program to return 0 instead.
Change-Id: I4d09f7ac5e8f9bcd6e6bde4712608444b642265c
Reviewed-on: https://gerrit.libreoffice.org/60539
Tested-by: Jenkins
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
since cdecl is the default calling convention on Windows for
such functions, the annotation is redundant.
Change-Id: I1a85fa27e5ac65ce0e04a19bde74c90800ffaa2d
Reviewed-on: https://gerrit.libreoffice.org/46164
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>
|
|
Change-Id: I18d4c77233c66b7d4359bed8d42f80271de637dc
|
|
Change-Id: I3b50e45fdb99e9cd8bfda07356ee3ddb4dd0f8bb
Reviewed-on: https://gerrit.libreoffice.org/38905
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Jochen Nitschke <j.nitschke+logerrit@ok.de>
|
|
with command
> git grep -l osl/diagnose.h *.cxx |
xargs grep -L -w 'OSL_\w*' |
xargs sed -i '/#include *\(<\|\"\)osl\/diagnose.h\(>\|\"\).*/d'
headers need more work
Change-Id: I906519ebbd47a04703b4fa5943b2f7abea7a97ab
Reviewed-on: https://gerrit.libreoffice.org/37350
Tested-by: Jochen Nitschke <j.nitschke+logerrit@ok.de>
Reviewed-by: Michael Stahl <mstahl@redhat.com>
|
|
Uwinapi is discontinued.
Change-Id: I063b4d0d8fab2d60de168e960a63b8181158ac01
Reviewed-on: https://gerrit.libreoffice.org/23198
Reviewed-by: David Ostrovsky <david@ostrovsky.org>
Tested-by: David Ostrovsky <david@ostrovsky.org>
|
|
Change-Id: I8b729ab7434ee04d55fd407cf67f54c1cb9fbca9
Reviewed-on: https://gerrit.libreoffice.org/34263
Tested-by: Stephan Bergmann <sbergman@redhat.com>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
...(for now, from LIBO_INTERNAL_CODE only). See the mail thread starting at
<https://lists.freedesktop.org/archives/libreoffice/2017-January/076665.html>
"Dynamic Exception Specifications" for details.
Most changes have been done automatically by the rewriting loplugin:dynexcspec
(after enabling the rewriting mode, to be committed shortly). The way it only
removes exception specs from declarations if it also sees a definition, it
identified some dead declarations-w/o-definitions (that have been removed
manually) and some cases where a definition appeared in multiple include files
(which have also been cleaned up manually). There's also been cases of macro
paramters (that were used to abstract over exception specs) that have become
unused now (and been removed).
Furthermore, some code needed to be cleaned up manually
(avmedia/source/quicktime/ and connectivity/source/drivers/kab/), as I had no
configurations available that would actually build that code. Missing @throws
documentation has not been applied in such manual clean-up.
Change-Id: I3408691256c9b0c12bc5332de976743626e13960
Reviewed-on: https://gerrit.libreoffice.org/33574
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Stephan Bergmann <sbergman@redhat.com>
|
|
Change-Id: I126446de2aa4314fb53bc6942b55b151a65f2b84
|
|
Change-Id: If9ea62b103f95a9f4abe692c6da2145f825a364f
|
|
The issue of 362d4f0cd4e50111edfae9d30c90602c37ed65a2 "Explicitly mark
overriding destructors as 'virtual'" appears to no longer be a problem with
MSVC 2013.
(The little change in the rewriting code of compilerplugins/clang/override.cxx
was necessary to prevent an endless loop when adding "override" to
OOO_DLLPUBLIC_CHARTTOOLS virtual ~CloseableLifeTimeManager();
in chart2/source/inc/LifeTime.hxx, getting stuck in the leading
OOO_DLLPUBLIC_CHARTTOOLS macro. Can't remember what that
isAtEndOfImmediateMacroExpansion thing was originally necessary for, anyway.)
Change-Id: I534c634504d7216b9bb632c2775c04eaf27e927e
|
|
A ridiculously fast way of doing this is:
for i in $(pcregrep -l -M -r --include='.*[hc]xx$' \
--exclude-dir=workdir --exclude-dir=instdir '^
{3,}' .)
do
perl -0777 -i -pe 's/^
{3,}/
/gm' $i
done
Change-Id: Iebb93eccbee9e4fc5c4380474ba595858a27ac2c
Reviewed-on: https://gerrit.libreoffice.org/22224
Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Chris Sherlock <chris.sherlock79@gmail.com>
|
|
Change-Id: I1934441858baeeb41a46f694dbcef2d846b308b7
|
