Contains common settings which are potentially shared by other
components.Contains a container for passwords.Contains a password encoded with the master password.Contains settings for a history entry in the history list.Specifies the document URL.Specifies the filter name that was chosen to load the
document.Indicates the title of the URL that is displayed on the
user-interface.Contains an encoded password used to open the document.Describes a menu entry for configurable office menus (e.g. file
new).Specifies the URL for dispatch.Specifies the label of a menu entry.Specifies the identifier of an assigned icon.Specifies the dispatch target (for example, _blank to open URL
in new frame).Contains the width and height of the dialog size.Contains the height of the dialog [UNIT=pixel].Contains the width of the dialog [UNIT=pixel].Describes the characteristics of a font.Specifies the exact name of the font ("Arial", "Courier",
"Frutiger").Specifies the height of the font in the measure of the
destination.Specifies the width of the font in the measure of the
destination.Specifies the style name of the font ("Bold", "Italic", "Italic
Bold").Specifies the general style of the font.DONTKNOWDECORATIVEMODERNROMANSCRIPTSWISSSYSTEMDONTKNOWSpecifies the character set which is supported by the
font.DONTKNOWANSIMACIBMPC_437IBMPC_850IBMPC_860IBMPC_861IBMPC_863IBMPC_865SYSTEMSYMBOLSpecifies the pitch of the font.DONTKNOWFIXEDVARIABLESpecifies the character width. Depending on the specified width,
a font that supports this width may be selected. [UNIT=%].Specifies the thickness of the line.Specifies if there is a character slant (italic).NONEOBLIQUEITALICDONTKNOWREVERSE_OBLIQUEREVERSE_ITALICSpecifies the type of underline.NONESINGLEDOUBLEDOTTEDDONTKNOWDASHLONGDASHDASHDOTDASHDOTDOTSMALLWAVEWAVEDOUBLEWAVEBOLDBOLDDOTTEDBOLDDASHBOLDLONGDASHBOLDDASHDOTBOLDDASHDOTDOTBOLDWAVESpecifies the type of strikeout.NONESINGLEDOUBLEDONTKNOWBOLDSLASHXSpecifies the rotation of the font. [UNIT=degree].Specifies if a kerning table is available (for requesting). For
selecting, specifies if the kerning table is to be used.Specifies if only words get underlined.Specifies the technology of the font representation.DONTKNOWRASTERDEVICESCALABLEContains settings for the font replacement.Contains the name of font that is to be replaced.Contains the name of the replacing font.Determines if the font pair replacement is applied on the
screen.falseDetermines if the font pair replacement is applied on the
printer.falseUse LogicalGraphicSize instead of this.Specifies the size of a graphic. [UNIT=1/100 mm].Specifies the width of graphic. [UNIT=1/100 mm].Represents the highest value that can be entered in the
dialog.Represents the lowest value that can be entered in the
dialog.10000Specifies the height of graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the
dialog.Represents the highest value that can be entered in the
dialog.10000Specifies the logical size of a graphic. [UNIT=1/100 mm].Specifies the logical width of a graphic.
[UNIT=1/100 mm].Represents the lowest value that can be entered in the
dialog.Represents the highest value that can be entered in the
dialog.10000Specifies the logical height of graphic. [UNIT=1/100 mm].Represents the lowest value that can be entered in the
dialog.Represents the highest value that can be entered in the
dialog.10000Replaced by
org.openoffice.Office.Embedding/ObjectName.DeprecatedDeprecatedDeprecatedSpecifies an entry of the recovery list which is then used by
CrashGuard to save information about the last opened files.Specifies an URL that should be recovered after the next Office
start.Specifies a filter that should be used to open the document
referenced by the URL property.Contains the name of the temporary file which represents the
document.Contains the characters (so called forbidden characters) that are
not allowed at the beginning or end of a line.Contains the characters that are not allowed at the beginning of
a line.Contains the characters that are not allowed at the end of a
line.Stores an association between a numeric value and a name.Specifies a name that is associated with a counter.Specifies a number that is associated with a name.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.Use cfg package Jobs instead of this.All Certificate information needed to handle and identify the
signature.Subject name of Certificate.Serial Number of Certificate.Raw of Certificate.specifies, on a per-application-type basis, certain defaults for
layouting form controlsspecifies the default visual effect for form controlsspecifies no special visual effectspecifies a flat appearancespecifies a 3D appearancespecifies whether the controls should use dynamic border
coloring, if possible. Dymamic border coloring means that when the
mouse is hovered over a control, and when a control receives the
focus, this is indicated with special border colors.falsecontrols whether form controls, when they render their text, use
the same metrics as the document does. If this is set to <true>,
then the control text's appearance better matches the text in the
surrounding document.</p> <p>Technically, documents use a
reference device for formatting, which usually has a higher resolution
than the actual output device. The option decides whether form
controls should use the same reference device as the surrounding
document. However, some of OOo's document implementations do not
properly use their reference device in all situations, in which case
the option might better be disabled.<p>trueStores registration data which is related to a specific product
version.An instance UUID associated with the product version ID.Stores the details of the installed personas.The Persona's nameName of the preview file for the Persona to show in the UIName of the header file for the PersonaName of the footer file for the PersonaValue of the text color for the PersonaValue of the accent color for the PersonaContains settings for VCL.Specifies if OpenGL rendering should be used in VCL backends
supporting it.falseSpecifies if OpenGL rendering should be used in VCL backends
supporting it. This one forces the use of OpenGL even if the
blacklist would block the OpenGL driver.falseDefines if the user interface animations (like "walking ant"
animation when copying a cell in Calc) is enabled or disabled.
Disabling animations makes a lot of sense on remote connections
(VNC), where animations increase the (always limited) amount of
bandwidth needed.
trueContains internal MSExport settings that are common for all
apps.Specifies if an old (5.0 format) way instead of a new one (6.0
OLE embedded document) should be used for export of inplace objects in
case MS-filters are not used for them.falseContains a description of the persistent password
container.Specifies if passwords can be stored persistently.falseSpecifies if there is a valid master password.falseContains the master password encrypted by itself.Contains a list of passwords encoded with the master
password.Contains a list of URLs that should be accessed using system
credentials of the user.Contains settings related to dictionaries.Specifies a repository URL where users can download additional
dictionaries.Specifies settings for the Drawinglayer.Specifies if the Overlay pane is allowed to use an own buffer.
If on, Overlay is fast but a buffer (graphics memory) is used. If off,
Overlay is slow, but no Buffer is needed. This is the global switch
which will enable/disable overlay for all Applications. This is the
global switch for the whole office.trueSimilar to OverlayBuffer, but only for Calc ApplicationtrueSimilar to OverlayBuffer, but only for Writer ApplicationtrueSimilar to OverlayBuffer, but only for Draw/Impress
ApplicationstrueSpecifies if the Application Repaint shall use a buffer for
Pre-Rendering. If on, screen flicker is greatly reduced and remote
display is fast, but a buffer (graphics memory) is needed. If off,
screen flicker will occur and remote display is slow, but no buffer
is needed. This is the global switch for the whole office.trueSimilar to PaintBuffer, but only for Calc Application.
PaintBuffer is the global switch.trueSimilar to PaintBuffer, but only for Writer Application.
PaintBuffer is the global switch.trueSimilar to PaintBuffer, but only for Draw/Impress Applications.
PaintBuffer is the global switch.trueSpecifies the first one of two colors used from overlay to
display striped lines as helplines. Default is black.0Specifies the second one of two colors used from overlay to
display striped lines as helplines. Default is white.16777215Specifies the length in pixels of a single stripe used from
overlay to display striped lines as helplines. Default is four.4Specifies the maximum allowed Paper Width for page definitions
in cm. Default is 3m, i.e. 300 cm. When this is changed to higher
values, it is done on own risk.300Specifies the maximum allowed Paper Height for page definitions
in cm. Default is 3m, i.e. 300 cm. When this is changed to higher
values, it is done on own risk.300Specifies the maximum allowed Left Margin for the page
definitions in 1/100th cm.9999Specifies the maximum allowed Right Margin for the page
definitions in 1/100th cm.9999Specifies the maximum allowed Top Margin for the page
definitions in 1/100th cm.9999Specifies the maximum allowed Bottom Margin for the page
definitions in 1/100th cm.9999This switch allows to switch DrawingLayer based views to be
rendered using AntiAliasing or not. Of course this takes only effect
when AntiAliasing is supported for the System OOo is running
on.trueThis switch allows to enhance visualisation of graphics which
use Horizontal or Vertical Hairlines combined with AntiAliased mode
(e.g. in 2D charts). When not used, those lines will be AntiAliased as
everything else. Since this is not pleasing for the eye, this option
allows to force those lines to snap to discrete points (pixels) when
activated and thus avoids AntiAliasing of pure Horizontal or Vertical
Hairlines.trueThis switch determines if the decorations of decorated text
portions (e.g. underline, strike through) are rendered using VCL
direct rendering or if the primitive is decomposed into simple text
and the corresponding geometrical representations of the decorations.
Default is true since VCL's usage of the diverse System's hinting
possibilities for decorations is useful.trueThis switch determines if simple text is directly rendered using
VCL or not. If not, the simple text is decomposed into PolyPolygons
which will be painted then. Default is true, since VCL will use the
hinting for font rendering on the diverse supported systems, which
gives better quality than rendering the text as Polygons.trueThis switch decides if Interactions in the DrawingLayer are
visualized using Wireframe or Full-Object previews. If false, only
Wireframe will be used. If true, Full-Object preview which gives a
much better feedback about the object interaction will be used. This
mode is used for modification and creation of objects. During
interaction, a geometric copy of the object(s) is shown with 50%
transparence in the foreground. That copy shows exactly what You will
get when You end the interaction.trueThis defines a Limitation for the default raster conversion from
3D Scenes to Bitmaps. The number is the maximum number of pixels to
use, e.g. 1000x1000 Pixels is allowed as default. When Scenes would
need more Pixels than this, the Bitmap will be limited and scaled to
the needed pixel size at paint time.1000000This defines a Limitation for the default raster conversion of
FormControls in edit mode. These have the ability to be displayed
using this fallback to Bitmaps. The number is the maximum number of
pixels to use, e.g. 300x150 Pixels is allowed as default. When
FormControls would need more Pixels than this, the Bitmap will be
limited and scaled to the needed pixel size at paint time.45000This switch defines if the selections in the applications (text
or cells) are visualized using inverse (XOR) when set to false (the
old selection method, also used when in HighContrast mode) or a
transparent overlay selection using the system's selection
color.trueSpecifies the degree of transparence to be used when transparent
selection is used. The value is a percent value. Since neither no
transparence nor complete transparence makes sense, the value is
limited to a range of 10% - 90%. If the given value is outside this
range, it is cropped to it.75Specifies the maximum allowed luminance the system's selection
color may have. When the colorfetched from the system is brighter
(luminance is bigger), it will be scaled to a luminance of exactly
this given value.70Contains miscellaneous settings for the auto correction.Specifies if the replacement table should be used to replace
letter combinations with defined texttrueSpecifies if two initial capitals should be corrected
automatically.trueSpecifies if the letter at the beginning of a sentence should be
capitalized automatically.trueSpecifies if text should be formatted in bold or underlined when
the corresponding characters are entered (*bold*, _underline_).trueSpecifies if character strings which could represent an URL
should be converted to a hyperlink.trueSpecifies if ordinal numbers should be displayed with raised
endings.trueSpecifies if minus signs should be replaced by dashes
automatically.trueAdds a non-breaking space before the characters :;!? in
french.trueSpecifies if multiple spaces should be combined into one.falseSpecifies whether or not to correct accidental use of CAPS lock
key.trueSpecifies if single quotes should be replaced.trueSpecifies the start single quote.Specifies the end single quote.Specifies if double quotes should be replaced.trueSpecifies the start quote.Specifies the end quote.Contains settings to apply replacement rules and
exceptions.Specifies if defined words with two initial capital letters
should not be included in the AutoCorrect replacement.trueSpecifies if defined abbreviations should be taken into
account to exclude a preceding capital letter.trueSpecifies cache related options.Specifies the cache related options for the drawing
engine.Determines the maximum number of OLE objects that can be held
in RAM for drawings, presentations and inserted drawing objects. The
fewer OLE objects contained in RAM, the more space is available for
other functions. The more OLE objects in RAM, the faster you can
page through the objects since they do not always need to be loaded
from the hard drive.20Specifies the cache related options for Writer.Determines the maximum number of OLE objects that can be held
in RAM for the writer. The fewer OLE objects contained in RAM, the
more space is available for other functions. The more OLE objects in
RAM, the faster you can page through the objects since they do not
always need to be loaded from the hard drive.20Specifies a group of graphic manager cache options.Specifies the maximum cache size for all graphical display
objects.200000000Specifies the maximum cache size for a single graphic display
object.12600000Specifies the time in seconds after which a cached object is
freed from the cache.600Contains the current and default path settings used by the
Office.Contains various properties information purpose only.A flag which is set by the tools options dialog whenever a
user changed the work path.trueContains the global path settings, mainly those of the Options
dialog.Specifies the directory that contains spreadsheet add-ins
which use the old add-in API.$(progpath)/addinSpecifies the settings of the AutoCorrect dialog.$(insturl)/@LIBO_SHARE_FOLDER@/autocorr$(userurl)/autocorrContains the directory which contains the AutoText
modules.$(insturl)/@LIBO_SHARE_FOLDER@/autotext/$(vlang)$(userurl)/autotextStores the automatic backup copies of documents.$(userurl)/backupContains the Basic files, which are used by the
AutoPilots.$(insturl)/@LIBO_SHARE_FOLDER@/basic$(userurl)/basicContains the bitmap files which can be used for menu and
toolbar icons.$(insturl)/@LIBO_SHARE_FOLDER@/config/symbolContains the configuration files. This value cannot be changed
through the user interface.$(insturl)/@LIBO_SHARE_FOLDER@/configContains the provided dictionaries.$(insturl)/@LIBO_SHARE_FOLDER@/wordbookSpecifies the path to save folder bookmarks.$(userurl)/config/foldersSpecifies the directory where all the filters are
stored.$(progpath)/filterSpecifies the directory which contains the Gallery database
and multimedia files.$(insturl)/@LIBO_SHARE_FOLDER@/gallery$(userurl)/gallerySpecifies the directory that is displayed when the dialog for
opening an image or for saving a new image is called.$(userurl)/gallerySpecifies the path to the Office help files.$(instpath)/@LIBO_SHARE_HELP_FOLDER@Contains the files that are necessary for the
spellcheck.$(insturl)/@LIBO_SHARE_FOLDER@/dictContains the Office modules.$(progpath)Specifies the path to the palette files *.SOB to *.SOF
containing user-defined colors and patterns.$(insturl)/@LIBO_SHARE_FOLDER@/palette$(userurl)/configSpecifies the directory in which the plugins are saved.$(progpath)/pluginWithout replacement.Specifies the location where misc data are stored.$(userpath)/storeReplaced by
org.openoffice.Office.Paths/TempSpecifies the base directory used by the Office to store temp
files.Specifies the templates originate from these folders and
sub-folders.$(insturl)/@LIBO_SHARE_FOLDER@/template/$(vlang)$(insturl)/@LIBO_SHARE_FOLDER@/template/common$(userurl)/templateSpecifies additional folders containing a global user
interface configuration. The final user interface configuration is
merged from UserConfig and from these folders.$(insturl)/@LIBO_SHARE_FOLDER@/configSpecifies the folder with the user settings.$(userurl)/configContains the custom dictionaries.$(userurl)/wordbookSpecifies the path of the work folder, which can be modified
according to the user's needs. The path specified here can be seen
in the Open or Save dialog.$(work)Contains the default values of all the paths, which can be
modified according to the user's needs. They are used when pressing
the Standard-button in the Options dialog.Specifies the default directory that contains spreadsheet
add-ins which use the old add-in API.$(progpath)/addinSpecifies the default directory for the settings of the
AutoCorrect dialog.$(insturl)/@LIBO_SHARE_FOLDER@/autocorr$(userurl)/autocorrSpecifies the default directory where the AutoText modules are
located.$(insturl)/@LIBO_SHARE_FOLDER@/autotext/$(vlang)$(userurl)/autotextSpecifies the default directory for the automatic backup
copies of documents.$(userurl)/backupSpecifies the default directory where the Basic files, used by
the AutoPilots, are located.$(insturl)/@LIBO_SHARE_FOLDER@/basic$(userurl)/basicSpecifies the default directory where the bitmap files, which
can be used for the menu and toolbar icons, are located.$(insturl)/@LIBO_SHARE_FOLDER@/config/symbolSpecifies the default directory where the configuration files
are stored.$(insturl)/@LIBO_SHARE_FOLDER@/configContains the URL of the default TSCP BAF policy file.$(insturl)/@LIBO_SHARE_FOLDER@/classification/example.xmlSpecifies the default directory where the provided
dictionaries are located.$(insturl)/@LIBO_SHARE_FOLDER@/wordbook/$(vlang)Specifies the default directory where folder bookmarks are
stored.$(userurl)/config/foldersSpecifies the default directory where all the filters are
stored.$(progpath)/filterSpecifies the default directory where the Gallery database and
multimedia files are located.$(insturl)/@LIBO_SHARE_FOLDER@/gallery$(userurl)/gallerySpecifies the default directory used by the dialog for opening
an image or for saving a new image.$(userurl)/gallerySpecifies the default directory where Office help files are
located.$(instpath)/@LIBO_SHARE_HELP_FOLDER@Specifies the default directory where the files that are
necessary for the spellcheck are saved.$(insturl)/@LIBO_SHARE_FOLDER@/dictSpecifies the default directory which contains the Office
modules.$(progpath)Specifies the default directory for the palette files *.SOB to
*.SOF containing user-defined colors and patterns.$(userurl)/configSpecifies the default directory where the Office plugins are
located.$(progpath)/pluginSpecifies the default directory that is used as a base
directory for all temporary Office files.$(temp)Specifies the default directory where all provided templates
are located in folders and sub-folders.$(insturl)/@LIBO_SHARE_FOLDER@/template/$(vlang)$(insturl)/@LIBO_SHARE_FOLDER@/template/common$(userurl)/templateSpecifies the default directories for the global user
interface configuration. The final user interface configuration is
merged from UserConfig and from these folders.Specifies the default directory which stores the user
settings.$(userurl)/configSpecifies the default directory which stores the custom
dictionaries.$(userurl)/wordbookSpecifies the default working directory where user stores
documents.$(work)Contains some common settings for fonts.Contains settings for the font substitution.Determines if the list of font replacements is applied or
notfalseSpecifies a substitution of the requested font, even if this
font is available on the user's system.Contains the settings for the font selection box in the object
bar.Contains the last five fonts, which are shown on the top of a
list, beginning with the last one. This list will be displayed on
the font-name-box of the object bar.trueSpecifies that the names of the selectable fonts will be
displayed with this font.trueSpecifies the font name and height used in HTML source
viewSpecifies the name of the font that is used in source views
(HTML source view or BASIC IDE)Specifies the height, in points, of the font that is used in
source views (HTML source view or BASIC IDE)10Specifies whether only non-proportional font should be
presented on the dialog page.trueSpecifies Gallery options.Contains information about configurable menus.Contains all entries of new menu.Contains all entries of wizard menu.Contains all help bookmarks.Contains history information.Describes the range and current size of the help bookmark
history list.Defines the minimum range of the help bookmark history
list.Defines the maximum range of the help bookmark history
list.10000Describes the range and current size of the history list.Defines the min range for the history size.Defines the max range for the history size.100Describes the range and current size of the picklist shown
inside the menu.Defines the min range for the picklist size.Defines the max range for the picklist size.25Specifies whether to generate/show a thumbnail image for RecentDocsView.trueContains the most recently opened help documents.Contains the most recently opened documents.Contains the most recently used documents displayed in the file
menu.Contains settings which are used during the Office startup to
check for unfinished work.Contains the documents that were opened when the office
crashed.Contains general settings about the saving process.Specifies if the all open windows and documents should be saved.
If set to true, the URLs of all open documents and all view properties
of all open views are saved when terminating the application.falseContains settings which specify how documents are saved.Saves OOo 6.0 XML file documents unpacked into a directory.
Documents are represented by the directory content and not by a
single file.falseSpecifies if the user's name should be written into the
Properties dialog of the document when saving the document.trueSpecifies whether all modified documents are automatically
saved in a time interval.falseSpecifies whether to generate a thumbnail image and place it inside the
the odf archive file, which makes it possible to see a preview of the document.trueSpecifies whether to create a backup copy when a modified
document is saved.falseSpecifies if the document properties dialog will be opened for
editing every time a document is saved under a new filename.falseShows a prompt during AutoSave,even when the document has a
filename.trueSpecifies the AutoSave time interval in minutes.Specifies that the minimum time interval is 1 minute.Specifies that the maximum time interval is 60 minutes.10Saves view properties of last active document view when saving
a document.trueSpecifies if files saved in the OOo 6.0 XML file formats
should be in pretty printing format. Saving and loading the document
takes more time in pretty printing format.falseSpecifies if a warning message is shown if a file is going to
be saved to an alien format.trueIf the option is set, every time a user triggers a plain Save
operation, SaveAs operation with possible additional user
notifications will be started.falseIf the value is "true", then the ODF that is saved by
OpenOffice.org will be backward compatible to previous minor
versions.trueSpecifies if the printer settings will be loaded with the
document.trueContains settings on how images contained in a document should
be saved.Specifies how images contained in a document are
saved.NormalCompressedOriginal format1Specifies how URLs in documents should be processed during
save.Specifies whether URLs in documents should be saved relative
to the file system.trueSpecifies if URLs in documents should be saved relative to the
Internet.trueSpecifies ODF settings.Specifies the default ODF version for saving documents.ODFVER_UNKNOWNODFVER_010ODFVER_011ODFVER_012ODFVER_LATEST3Specifies whether SHA1 algorithm instead of SHA256 should be
used in ODF12 for StartKey and Checksum generation during
encryption.falseSpecifies whether Blowfish algorithm instead of AES should be
used in ODF12 for encryption.falseContains settings regarding the loading of documents.Specifies whether the user defined configuration settings are
loaded together with the document.trueSpecifies whether the office update dialog should be shown in
case the loaded document has newer ODF version than the maximal
supported one.trueContains security specific Office settings.Determines if the user has access to the entire
configuration via the Expert Configuration button.trueContains security settings regarding Basic scripts.Lists all trustworthy URLs: file: All scripts from the local
file system including a LAN; private:explorer: Scripts from the
Explorer; private:help: Scripts in the help system; private:newmenu:
Scripts that are executed by the commands File-New and AutoPilot;
private:schedule: Scripts of the scheduler; private:searchfolder:
Scripts of the searchfolder; private:user: Scripts that are entered
in the URL field.Determines how Office Basic scripts should be handled.NeverAccording to Path ListAlways1Specifies whether execution of plugins found inside a document
is allowed.trueSpecifies whether a warning box should be displayed before
executing a script.falseSpecifies whether the user must confirm before a basic script
can be executed.trueSpecifies whether to warn when saving or sending documents with
personal/hidden data.falseSpecifies whether to warn when signing documents with
personal/hidden data.trueContains the path to the users NSS certificate directory.Contains the URLs or Time Stamping Authority servers.Specifies whether to warn when printing documents with
personal/hidden data.falseSpecifies whether to warn when creating PDF documents with
personal/hidden data.falseSpecifies whether to remove personal information on
saving.falseSpecifies whether to recommend password protection when saving
documents.falseSpecifies whether ctrl-click is required to follow
hyperlinks.trueSpecifies whether to block any links originating from
documents that are not among the trusted locations.falseLevel of Macro security.Lowest level.Highest level.2Specifies whether the macro execution is disabled in general.
If it is set to true, the "MacroSecurityLevel" is ignored. If it is
set to false, the mentioned entry specified the level of macro
security.falseList with trusted authors.Contains window and dialog settings.Contains settings to change new document window behavior.Every new document window will be forced to front and grabs
the focus.falseContains settings on how the application window should be
displayed.Specifies whether the application window should be opened in
Fullscreen mode.falseSpecifies the preferred view of the application window.Use last settingShow in task barOpen in Fullscreen mode0Contains settings which specify how dialogs and toolbars should
be displayed.Specifies whether toolbar buttons should be drawn large or
small. True means large.falseSpecifies whether toolbox buttons should be drawn with a flat
or 3D design. True means flat design.trueDetermines the automatic mouse positioning on dialogs: 0 -
Default button 1 - Dialog center 2 - No automatic positioningSnap To ButtonSnap To MiddleNo Snap2Determines the action assigned to the middle mouse button: 0 -
No action 1 -Auto scroll 2 - Paste selection.No actionAuto scrollPaste selection1Contains menu view settings.Shows all deactivated menu entries. Menu commands that are
normally not necessary are hidden by default.trueIndicates whether icons in the office menus should
shown/hidden by following the System theme.trueIndicates whether icons in the office menus should be
displayed.trueSpecifies automatic selection while moving the mouse over a
menu (True).trueIndicates whether keyboard shortcuts should be displayed in
context menus.HideShowUse the default setting for the current platform.2Contains settings for general windows used by the Office.Specifies the representation of the window while
dragging.With window contentsFrame onlyFrom system settings2Deprecated.Deprecated.Deprecated.falseDeprecated.ZoomInSmallForceDockAutoHideTaskCantGetFocusDeprecated.Specifies the properties of window containers for docked
windows.Deprecated.Deprecated.Deprecated.Stick/HiddenFloating/HiddenStick/VisibleFloating/VisibleDeprecated.Deprecated.Font antialiasing propertiesSpecifies font antialiasing propertiestrueSpecifies an additional limit if Font Antialiasing is enabled.
Fonts that are smaller than the specified limit are not
anti-aliased.8Contains the settings regarding the undo operation in the
Office.Specifies how many operations can be undone in a row.Specifies the lowest number of undo steps possible.Specifies the highest number of undo steps possible.100Specifies options related to the setup.Specifies options related to the installed languages.Contains the installed Office languages for the menus and
dialogs.Specifies options related to printing.Specifies if printing a document can modify a document due to
reformattingfalseContains settings for print specific warnings.Specifies if a warning should be displayed in case the
printout requires a specific paper sizefalseSpecifies if a warning should be displayed in case the
printout requires a specific paper orientationfalseSpecifies if a warning should be displayed in case the printer
defined in the document was not foundfalseSpecifies if a warning should be displayed in case the
printout contains transparent objects.trueSpecifies the options related to printing.Specifies the options related to printing.Indicates whether to ignore transparency for the output of
objects.falseSpecifies type of transparency reduction: 0 - Automatically
determine reduction, 1 - Always disabled.0Indicates whether to reduce memory usage for output of
gradients by limiting the number of gradient steps.falseSpecifies type of gradient reduction: 0 - reduce the number
of stripes, 1 - reduce to color.0Specifies the maximum number stripes used for output of
gradients.64Indicates whether to reduce the memory usage of bitmaps for
print process by limiting the resolution.falseSpecifies type of bitmap reduction: 0 - Automatically
determine optimal resolution, 1 - Use original resolution, 2 -
User defined resolution.1Specifies resolution of reduced bitmaps: 0 - 72DPI, 1 -
96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI.3Indicates whether to reduce the resolution of automatically
created substitution bitmaps of transparent objects.trueIndicates whether to create only grayscale output of all
objects.falseIndicates whether PDF should be the Standard Print Job
formattrueSpecifies the options for printing to a file.Indicates whether to ignore transparency for the output of
objects.falseIndicates the type of transparency reduction: 0 -
Automatically determine reduction, 1 - Always disabled.0Indicates whether to reduce memory usage for output of
gradients by limiting the number of gradient steps.falseIndicates the type of gradient reduction: 0 - Reduce the
number of stripes, 1 - Reduce to color.0Specifies the maximum number stripes used for output of
gradients.64Indicates whether to reduce the memory usage of bitmaps for
the print process by limiting the resolution.falseSpecifies the type of bitmap reduction: 0 - Automatically
determine optimal resolution, 1 - Use original resolution, 2 -
User defined resolution.1Specifies the resolution of reduced bitmaps: 0 - 72DPI, 1 -
96DPI, 2 - 150DPI, 3 - 200DPI, 4 - 300DPI, 5 - 600DPI.3Indicates whether to reduce the resolution of automatically
created substitution bitmaps of transparent objects.trueIndicates whether to create only grayscale output of all
objects.falseIndicates whether PDF should be the Standard Print Job
formattrueContains settings specifying if a XML package is added to the
applications binary files.Defines if a XML package is added to the Writer binary
files.Defines if a XML package is added to the Calc binary
files.Defines if a XML package is added to the Impress binary
files.Defines if a XML package is added to the Draw binary
files.Contains recent colors and custom colorsList of Recent colorsList of Recent color namesName of selected palettestandardList of Custom colorsList of Custom color namesContains settings that specify the common help settings.Determines whether basic help should be shown.trueDetermines the locale for the help pages.Determines the operating system on which the help system is
displayed.Activates the Tip help.trueActivates the Extended help.falseSpecifies the name of the stylesheet used to display help
content.DefaultSpecifies the properties of the HelpAgent.Specifies whether the HelpAgent is enabled.trueSpecifies the time-out value in seconds after which the
HelpAgent is closed automatically if ignored by the user.30Specifies how often the user must ignore a given HelpAgent
topic until it is disregarded in the future (any requests for this
topic will be dropped silently).3Contains the help URLs which have been ignored at least once
by the user, together with a counter of how often they have been
ignored.Contains settings for the start center.Contains a string specifying the URL to be browsed for
additional features (e.g. extensions)Contains a string specifying the URL to be browsed for
information about the productContains a string specifying the URL to be browsed for
additional template documentsContains a number deciding whether to show or hide buttons
with external links0Specifies the background color of the start center.14540253Specifies the text color of the buttons in the start center.3355443Specifies the background color of the thumbnail area in the start center.6710886Specifies the text color of the thumbnail area in the start center.15658734Specifies the background color of the highlight of a thumbnail in the start center.14540253Specifies the text color of the highlight of a thumbnail in the start center.3355443Contains Java related settings.Contains Applet related settings.Enables/disables Java applets in Office documents.falseSpecifies the options related to the vectorization of
bitmaps.Specifies the number of colors that are used to create a vector
graphic in Draw/Impress [UNIT=count].Specifies that the lowest number that can be used to create
a vector graphic is 8.Specifies that the lowest number that can be used to create
a vector graphic is 32.8Specifies the number of pixels that you want to combine as a
single pixel when creating a vector graphic.Specifies the minimum value to reduce point is 0
pixels.Specifies the maximum value to reduce point is 32
pixels.0Indicates whether to create a tiled background before
vectorizing.falseSpecifies the extent of background tiles that are used for
vectorizing [UNIT=pixel].Specifies that the minimum extent is 8 pixels.Specifies that the maximum extent is 128 pixels.32Specifies the options for images.Specifies the color options for images.Deprecated.Deprecated.Deprecated.256Deprecated.Deprecated.Deprecated.10Deprecated.Deprecated.Deprecated.10Specifies the RGB color options for images.Deprecated.Deprecated.Deprecated.10Deprecated.Deprecated.Deprecated.10Deprecated.Deprecated.Deprecated.10Specifies the effects options for images.Deprecated.DeprecatedDeprecatedDeprecatedDeprecated2Deprecated.falseDeprecated.DeprecatedDeprecatedDeprecatedDeprecated2Deprecated.Specifies that the minimum intensity is 0.Specifies that the maximum intensity is 100.10Specifies settings for the date formats used.Specifies the first year that can be entered using
two-digit-year date formats.1930Specifies default settings of Microsoft-, Graphic- and HTML
filters.Specifies default settings of Microsoft filters.Specifies default settings of Microsoft import filters.Specifies if convertible MathType OLE objects are converted
into Math objects.trueSpecifies if convertible WinWord OLE objects are converted
into Writer objects.trueSpecifies if convertible Excel OLE objects are converted
into Calc objects.trueSpecifies if convertible PowerPoint OLE objects are
converted into Impress objects.trueSpecifies if OOXML SmartArt objects are converted into LO shapes.falseFlag to control use of enhanced fields.trueSpecifies default settings of Microsoft export filters.Specifies if embedded Math objects are converted into
MathType objects.trueSpecifies if embedded Writer objects are converted into
WinWord objects.trueSpecifies if embedded Calc objects are converted into Excel
objects.trueSpecifies if embedded Impress objects are converted into
PowerPoint objects.trueSpecifies if previews are created when saving PowerPoint
documents.trueSpecifies if previews are created when saving Excel
documents.falseSpecifies if previews are created when saving Word
documents.falseSpecifies if character background is exported as highlighting
(and not as shading) when saving to Word documenttrueSpecifies default settings of graphic import and export
dialogs.Specifies default settings of graphic import dialogs.Specifies default settings of the PCD - Photo CD Base import
dialog.Specifies import resolution of PCD graphics.PCD-Base16, 192*128 PCD graphic.PCD-Base4, 384*256 PCD graphic.PCD-Base, 768*512 PCD graphic.2Specifies default settings of graphic export dialogs.Specifies the unit default that is used in the graphic
export dialog if exporting pixel graphics.inchescmmmpointspicapixelsdefault (depends to the metric settings in
tools/options)-1Specifies the unit default for the resolution that is used
in the graphic export dialog if exporting pixel
graphics.pixels/inchpixels/cmpixels/meter0Specifies the logical width of a graphic.
[UNIT=1/100 mm].Represents the lowest value that can be entered in the
dialog.96Specifies the maximum raw graphic size in bytes up to which
the realtime preview is enabled, for fast computers this value may
be enlarged4000000Specifies the unit default that is used in the graphic
export dialog if exporting vector graphics.inchescmmmpointspicadefault (depends to the metric settings in
tools/options)-1Specifies default settings of the Windows Bitmap export
dialog.Specifies the number of colors that are to be used for the
export.Original1 bit, 1 bit threshold1 bit, 1 bit dithered4 bit, 4 bit grayscale4 bit, 4 bit color palette8 bit, 8 bit grayscale color8 bit, 8 bit color palette24 bit, 24 bit true color0Specifies if Run-Length-Encoding should be used in the
export.trueSpecifies default settings of the EPS - Encapsulated
Postscript export dialog.Specifies if a preview graphic should be exported together
with the Encapsulated PostScript file. Due to the fact that most
programs can't render eps graphics, it is useful to provide a
preview that can be displayed as replacement. The preview
graphic will also be printed if the printer is not capable of
Postscript.NoneTIFFInterchange (EPSI) - 1 bit color resolutionTIFF and EPSI0Specifies the PostScript version that has to be used for
the EPS export. Because not every PostScript printer is capable
of version 2 PostScript, it is sometimes necessary to create
version 1 PostScript graphics. PostScript Level 1 does not
support color and bitmap compression.Version 1 PostScriptVersion 2 PostScript2Specifies if color or grayscale format is used for the EPS
export. This option is not available for version 1 PostScript
files.Color formatGrayscale format2Specifies if bitmaps are exported by using the LZW (Lempel
- Ziv - Welch) compression algorithm. Compression is only
available for level 2 PostScript files.LZW compressionNo compression2Specifies if glyph outlines are exported. They produce the
highest quality and it is the only possible way to create EPS
files that are CJK compliant. Not using glyphs will produce
smaller files, but it might lead to problems if not all fonts
are available during printing.Glyph outlinesNo glyph outlines0Specifies default settings of the GIF - Graphics Interchange
export dialog.Specifies if graphics should be exported using interlace.
It is recommended for big pictures to activate interlace, so the
content can be displayed immediately when loading the
picture.DeactivateActivate1Specifies if the graphic background is stored as
transparent.No transparencyTransparency1Specifies default settings of the JPEG - Joint Photographic
Experts Group export dialog.Specifies quality of the JPG export. A higher value
results in higher quality and file size.Represents lowest value that can be used. The lower
the value, the less good is the compression quality and the
bigger is be the file size.Represents highest value that can be used. The higher
the value, the better is the compression quality and the
smaller is the file size.75Specifies if graphics are exported using true color or
grayscale.True colorsGrayscale0Specifies default settings of the PBM - Portable Bitmap
export dialog.Specifies if graphics are exported to binary- or ASCII
format.BinaryASCII1Specifies default settings of the PGM - Portable Graymap
export dialog.Specifies if graphics are exported to a binary- or ASCII
format.BinaryASCII1Specifies default settings of the PPM - Portable Pixelmap
export dialog.Specifies if graphics are exported to a binary- or ASCII
format.BinaryASCII1Specifies default settings of the PNG - Portable Network
Graphic export dialog.Specifies export compression settings which ranges from 0
(no compression) to 9 (maximum compression). The calculating
time increases with an ascending compression value.Represents lowest value that can be used. The lower
the value, the lower the compression quality and the larger
the file size.Represents the highest value that can be used. The
higher the value, the higher the compression quality and the
smaller the file size.6Specifies if graphics should be exported using interlace.
It is recommended for big pictures to activate interlace, so the
content can be displayed immediately when loading the
picture.Deactivate interlace modeActivate interlace mode1Specifies default settings of SVG export dialog.Specifies if SVG Tiny profile should be used for
export.falseSpecifies if fonts should be embedded into SVG
file.trueSpecifies if text decoration like underlining and
strike-through be drawm by using SVG attributes (true) or by
drawing SVG primitives (false).trueContains settings for HTML import/export.Contains settings for HTML import.Specifies if numbers should be parsed according to the en-US
locale instead of the user's locale.falseSpecifies if unknown tags should be imported as
fields.falseSpecifies if font settings should be ignored when
importing.falseSpecifies font size for HTML.Specifies font size for HTML as Token Font 1.7Specifies font size for HTML as Token Font 2.10Specifies font size for HTML as Token Font 3.12Specifies font size for HTML as Token Font 4.14Specifies font size for HTML as Token Font 5.18Specifies font size for HTML as Token Font 6.24Specifies font size for HTML as Token Font 7.36Contains settings for HTML export.Specifies the browser for which the HTML export should be
optimizedHtml 3.2MSIE 4.0Netscape 3.0WriterNetscape 4.04Specifies if Office Basic instructions are considered when
exporting in HTML format.falseSpecifies if the print layout of the current document should
also be exported.falseSpecifies whether images are copied to the Internet server when
uploading via FTP.trueSpecifies if a warning should be displayed to point out that
the available Basic macros will be lost when exporting in HTML
format.trueSpecifies the mimetype for the text encoding.Specifies default settings of PDF export dialog.Specifies default settings of PDF export dialog.Use following properties instead:
UseLosslessCompression, Quality, UseResolutionReduction,
ResolutionReductionDeprecated.1Specifies if graphics are exported to PDF using a lossless
compression eg. PNG or if they are compressed using the JPEG
format.falseSpecifies quality of the JPG export. A higher value results
in higher quality and file size.Represents lowest value that can be used. The lower the
value, the less good is the compression quality and the bigger
is be the file size.Represents highest value that can be used. The higher
the value, the better is the compression quality and the
smaller is the file size.90Specifies if the resolution of each image is reduced to the
resolution specified by the property MaxImageResolution.trueIf the property ReduceImageResolution is set to true all
images will be reduced to the given value in DPI.751503006001200300Determines if PDF are created by using special tags also
known as Tagged PDF.falseSpecifies if notes are exported to PDF.falseSpecifies if PDF automatically opens after export.falseSpecifies if bookmarks are exported to PDF.trueSpecifies if placeholder fields are exported to PDF.trueSpecifies how many bookmark levels should be opened in the
reader application when the PDF gets opened.-1Specifies if notes pages are exported to PDF. (Notes pages
are available in Impress documents only).falseSpecifies if only notes pages (i.e., not slides) are exported to PDF. (Notes pages
are available in Impress documents only).falseSpecifies slide transitions are exported to PDF. This option
is active only if storing Impress documents.trueSpecifies whether form fields are exported as widgets or
only their fixed print representation is exported.trueSpecifies the submitted format of a PDF form.Specifies that forms type FDF is used.Specifies that forms type PDF is used.Specifies that forms type HTML is used.Specifies that forms type XML is used.0Specifies whether multiple form fields exported are allowed
to have the same field name.falseSpecifies that automatically inserted empty pages are
suppressed. This option is active only if storing Writer
documents.trueSpecifies that a stream is inserted to the PDF file which
contains the original document for archiving purposes.falseSpecifies whether to hide the PDF viewer menubar when the
document is active.falseSpecifies whether to hide the PDF viewer toolbar when the
document is active.falseSpecifies whether to hide the PDF viewer controls when the
document is active.falseSpecifies that the PDF viewer window is opened full screen
when the document is opened.falseSpecifies that the PDF viewer window is centered to the
screen when the PDF document is opened.falseSpecifies that the PDF viewer window is opened full screen,
on top of all windows..falseSpecifies that the title of the document, if present in the
document properties, is displayed in the PDF viewer window title
bar.trueSpecifies how the PDF document should be displayed when
opened.Select the default viewer mode, neither outlines or
thumbnails.The document is opened with outline pane openedThe document is opened with thumbnail pane opened0Specifies the action to be performed when the PDF document
is opened.Opens with default zoom magnification.Opens magnified to fit the entire page within the
window.Opens magnified to fit the entire page width within the
window.Opens magnified to fit the entire width of its bounding
box within the window (cuts out margins).Opens with the zoom level specified in the Zoom
property.0specifies the zoom level a PDF document is opened with. Only
valid if "Magnification" is set to "4".100Specifies the page on which a PDF document should be opened
in the viewer application.1Specifies the page layout to be used when the document is
opened.Display the pages according to the reader
configuration.Display one page at a time.Display the pages in one column.Display the pages in two columns odd pages on the right,
to have the odd pages on the left the FirstPageOnLeft property
should be used as well.0Used with the value 3 of the PageLayout property above, true
if the first page (odd) should be on the left side of the
screen.falseSpecifies what printing is allowed.The document cannot be printed.The document can be printed at low resolution
only.The document can be printed at maximum
resolution.2Specifies the change allowed to the document.The document cannot be changed.Inserting deleting and rotating pages is allowed.Filling of form field is allowed.Both filling of form field and commenting is
allowed.All the changes of the previous selections are
permitted, with the only exclusion of page extraction
(copy).4Specifies that the pages and the document content can be
extracted to be used in other documents (copy and paste).trueSpecifies that the document content can be extracted to be
used in accessibility applications.trueSpecifies the version of PDF to emit.PDF 1.4 (default selection).PDF/A-1 (ISO 19005-1:2005)0Specifies that the file system related hyperlinks (file://
protocol) present in the document will be exported as relative to
the source document location.falseSpecifies the way the exported PDF will be viewed
(experienced) by the user.Specifies that the PDF will be exported with all the
links external to the document treated as URI. This is the
DefaultSpecifies that the PDF will be exported in order to be
viewed through a PDF reader application only. Valid only if
not exporting to PDF/A-1 (e.g. SelectPdfVersion not set to
1).Specifies that the PDF will be exported in order to be
viewed through an Internet browser, using the PDF plug-in
provided with it. The bookmark of the URI will be rendered
compatible with the target bookmark generated with OOo PDF
Export feature (see ExportBookmarksToPDFDestination,
below).0Specifies that the target documents with .od[tpgs]
extension, will have that extension changed to .pdf when the link
is exported to PDF. The source document remains untouched.falseSpecifies that the bookmarks contained in the source
OpenOffice.org file should be exported to the PDF file as Named
Destination (see PDF 1.4 section 8.2.1).falseDetermines the miscellaneous entries for the common group.Determines the maximum count of documents, which are allowed to
be open at the same time. NIL will be interpreted as infinite!Special font for rendering of emojisNoto EmojiEnables/Disables Plugins.trueDetermines if the system's file and folder pickers should be
used. If false, the proprietary file/folder picker implementations
will be used. Relevant on platforms where file/folder picker
integration is implemented.trueAllows to specify whether the OOo document file locking
mechanics should use the system file locking.trueAllows to specify whether the OOo document file locking
mechanics should use the lock file for locking.trueAllows to specify whether locking should be used at all.
Use this setting only for debugging purpose.trueDetermines if a warning dialog should be
displayed when a user checks the link checkbox in
the insert images dialog.trueDetermines if the system's print dialog should be used. If
false, the platform independent print dialog implementation will be
used. Relevant on platforms where print dialog integration is
implemented.falseDisables the customization of the UI elements.falseDetermines if various experimental, and potentially unstable
features should be enabled in the user interface.falseDetermines whether the interactive screenshot mode should be enabled.falseDetermines whether the usage information (like what actions
the user has performed) can be collected, and potentially sent for
examination.falseDetermines whether OpenCL can be used, when available, to speed up
some operations.trueCombinations of (OS, OS version, OpenCL platform vendor, OpenCL device name, OpenCL driver version) that are known to be bad. Each entry is a string consisting of five parts separated by slashes. An empty part matches anything. In case a slash, percent or semicolon occurs inside a part, it is replaced by a percent followed by the corresponding number as two hex digits. The parts except OS can contain regular expressions. Inside these regular expressions the usual characters .*()[]\ are special and should be quoted with a backslash to be interpreted literally. OS should be just one of "Linux", "OS X" (including the space) or "Windows" (without quotes). Has higher priority than OpenCLWhiteList.Windows//Intel\(R\) Corporation//9\.17\.10\.2884;Windows//Intel\(R\) Corporation//4\.2\.0\.99;Windows//Intel\(R\) Corporation//5\.2\.0\.10049;Windows//Intel\(R\) Corporation//3\.0\.1\.10891Like OpenCLBlackList, but for combinations known to be good.Linux//Advanced Micro Devices, Inc\.//1445\.5 \(sse2,avx\);//Advanced Micro Devices, Inc\.//;//Intel\(R\) Corporation//;//NVIDIA Corporation//A string identifying the OpenCL device that was successfully selected and passed the OpenCL calculation tests. The syntax of this value is purposely not documented. For LibreOffice internal use only, do not inspect this value or try to modify it from any level of user code.noneDetermines whether Software Interpreter can be used to speed
up some operations on Calc formulas.trueDetermines if the limited, and awkward code producing
macro recorder should be enabled in the user interface.falseSpecifies which size of the symbols is used for the
toolbars.16x16 pixel icons26x26 pixel icons32x32 pixel icons2Specifies which size of the icons is used for the
sidebar.will let the toolbox decide about its sizesmall iconslarge icons0Specifies which size of the icons is used for the
notebookbar.will let the toolbox decide about its sizesmall iconslarge icons0Specifies which style of the symbols is used for the toolbars,
menus, etc.: "auto" means chosen according to the desktop; "default"
means the LibreOffice default theme; other possible values are the
names of the various icon themes ("breeze", "crystal", "elementary",
etc.).autoSpecifies whether we should use a Firefox Persona, ie. a
picture under the menu, toolbar, and status bar.No - the user wants just the themed look, no Persona.Default - the LibreOffice default Persona.The user installed an own Persona, and wants to use that.defaultNames of the header and footer images, and colors for text and
accent. When set, the value has form
"header.jpg;footer.jpg;#RGBTXT;#RGBACC".Specifies which button style the toolbars should use.3D styleFlat style1Enables/Disables the usage of AutoPilots for form
controls.trueSpecifies if the office has never before been started.trueList of template repositories URLs bookmarked in the Templates dialog.List of template repositories names bookmarked in the Templates dialog.List of URLs of the places the user bookmarked in the file picker dialog.List of names of the places the user bookmarked in the file picker dialog.URL of the last used service in the remote file picker.List of sample URLs of the CMIS servers in the place edition dialog.List of names of the CMIS servers in the place edition dialog.Contains the Personas installed through extensionscontains settings for the form layer of the applications.specifies certain default layout settings for form controls. All
those settings can be overruled in concrete documents, they specify
creation-time defaults only.specifies certain default layout settings for form controls in
text documentsspecifies certain default layout settings for form controls in
web pagesspecifies certain default layout settings for form controls in
spreadsheet documentsspecifies certain default layout settings for form controls in
drawing documentsspecifies certain default layout settings for form controls in
presentation documentsspecifies certain default layout settings for form controls in
XML form documentsspecifies certain default layout settings for form controls in
database form documentsspecifies certain default layout settings for form controls in
database text report documents.specifies settings for the property browser used for forms and
form controls.Enables or disables the property browser's access to
form/control properties which are not officially supported.falseEnables or disables a help section at the bottom of the
property browser, which shows the help of the currently active
property.falseContains layout specific settings for Asian languages.Determines the kerning of western text and/or punctuation inside
of Asian text.trueDetermines the type of character distance compression in Asian
text: 0 - no compression; 1 - compress punctuation only; 2 - compress
interpunction an japanese kana.0Contains the characters at which lines are not allowed to begin
or to end. For each locale there is a separate entry with the locale
as its node name.Contains all options for search.Specifies search for whole words only.falseSpecifies search backwards.falseSpecifies search with the use of wildcards.falseSpecifies search with the use of regular expressions.falseSpecifies search for styles only.falseSpecifies search with similarity.falseSpecifies search as case sensitive.falseSpecifies search with the use of CTL option.trueSpecifies search with the use of CTL option.trueSpecifies search with the use of Asian options.falseSpecifies the divider label in case of a component-based search
extension.Specifies the label of the first component-based search
command.Specifies the label of the second component-based search
command.Specifies if search includes comments(SwPostItFields)falseSpecifies if formatted display strings are searched instead of cell content (Calc).falseContains search options for the Japanese language.Does not distinguish between full-width and half-width
characters.trueDoes not distinguish between hiragana and katakana
characters.trueSpecifies search without distinguishing between characters
with diphthongs and double consonants and plain characters.trueSpecifies search without distinguishing between minus signs,
dashes, and long vowel sounds.trueSpecifies search without distinguishing between repeat
character marks.trueSpecifies search without distinguishing between standard and
nonstandard ideography.trueSpecifies search without distinguishing between standard and
nonstandard ideography.trueSpecifies search without distinguishing between 'Di' and 'Zi'
or 'Du' and 'Zu'.trueSpecifies search without distinguishing between 'Ba' and 'Va'
or 'Ha' and 'Fa'.trueSpecifies search without distinguishing between 'Tsi', 'Thi'
and 'Chi' or 'Dhi' and 'Zi'.trueSpecifies search without distinguishing between 'Hyu' and
'Fyu' or 'Byu' and 'Vyu'.trueSpecifies search without distinguishing between 'Se' and 'She'
or 'Ze' and 'Je'.trueSpecifies search without distinguishing between 'Ia' and
'Iya'.trueSpecifies search without distinguishing between 'Ki' and
'Ku'.trueSpecifies search without distinguishing between punctuation
characters.trueSpecifies search without distinguishing between characters
used as blank spaces, such as full-width spaces, half-width spaces,
and tabs.trueSpecifies search without distinguishing between prolonged
sound marks.trueSpecifies search without distinguishing between normal dots
and middle dots.trueSpecifies settings for the accessibility options.Enables the automatic detection of a high contrast mode set for
your desktop. Some OS' do not provide this option explicitly, but
allow the user to choose a color scheme that is HC-compliant
implicitly, which is recognized if the option is set.falseEnables the use of high contrast colors, instead of displaying
the normal/original WYSIWYG colors.trueEnables or disables the automatic time out of help tips. You can
specify a duration (n) of 1 to 99 seconds. If this option is
disabled, press the Esc key to dismiss the help tip.trueEnables or disables the automatic time out of help tips. You
can specify a duration (n) of 1 to 99 seconds. If this option is
disabled, press the Esc key to dismiss the help tip.Specifies the number of seconds to wait before displaying a
help tip.Specifies the number of seconds to display a help
tip.4Indicates whether to allow the graphical animation in all SO/OO
applications (i.e. animated GIFs and objects in Impress during
presentation, animated graphical previews (Gallery,
Insert-Image, Animation Tool in Impress.)trueIndicates whether to allow all textual animation like blinking
and scrolling in all SO/OO applications.trueOverrides all text color attributes set in a SO/OO document for
display only.falseAllows the user to change the UI font to the system
default.trueIndicates whether the cursor is displayed in read-only
texts.false
Option to use EdgeBlending for previews in the UI (for ColorValueSet, ColorDropDown, FillStyle/LineStyle
previews, etc...). EdgeBlending will visualize a one pixel border on the preview object with interpolated
colors (default: TopLeft White, BottomRight Black) so that a nice 3D effect is shown. It is a percent
value describing how strong the effect shall be. The value 0% switches it off, while the value 100% will
cover the preview object's border completely with one pixel. Values in-between vill be alpha-blended with
the original preview image.
35
This option controls how many lines of a ListBox will be shown as a maximum. If the ListBox has less lines,
all lines will be shown when opening the drop down content. If it has more lines, the visible number of
lines will be limited to this number. The value 0 disables this feature, negative values are not allowed.
This feature may not be used automatically by all ListBox implementations,
but it gives a central hint value to use if an implementation wants to adapt to something useful.
25
This option controls how many columns the ColorValueSets (the matrix-organized dialogs for color select)
will have. The default is 12 and this is aligned with the layout of the standard color palette. thus, when you
change this value, you should know what you do. This setting also influences some width-oriented layouts in
dialogs where this ColorValueSets are used, e.g. FillStyle dialog.
12
This option allows to make previews (e.g. UI previews for object attributes) show the content with a checkered
background to allow simple identification and better preview of transparent content, e.g. when a draw object
is filled with a transparent image (SVG or bitmap) the preview will show the checkered background shine
through, so the user can identify that the fill has transparency with a single look.
falseWithout replacement.Specifies external helper applications / protocol handlers.Specifies an external mail application to be used for Send as
email.Specifies the external mail application to be used.Contains various language/localization specific settings.Contains settings for (language/localization specific) input
methods.Controls the behavior of the IIIMP status window on Unix. If
true, the status window is always displayed. If false, the status
window is never displayed. If nil (the default), the status window
is displayed depending on the current locale.Contains settings for the Asian languages (Chinese, Japanese,
Korean,...) layout.Specifies, whether CJK font settings are available (true) or
not (false).falseSpecifies, whether vertical text is available (true) or not
(false).falseSpecifies, whether Asian typography options like compression
and forbidden characters are available (true) or not (false).falseSpecifies, whether Japanese find options are selectable for
search and replace (true) or not (false).falseSpecifies whether Rubys are available (true) or not
(false).falseSpecifies whether case mapping to half and full width,
hiragana and katagana are available (true) or not (false).falseSpecifies whether writing in double lines is available (true)
or not (false).falseSpecifies whether emphasis marks are available (true) or not
(false).falseSpecifies whether vertical call out objects are available
(true) or not (false).falseContains settings for the languages with complex text layout
(Hebrew, Arabic, Thai,...).Specifies whether CTL font settings are available (true) or
not (false).falseSpecifies whether CTL strings are checked for the correct
input sequence(true) or not (false).falseSpecifies whether CTL strings are checked restricted for the
correct input sequence(true) or not (false). Is only effective when
CTLSequenceChecking is true.falseSpecifies whether CTL input sequences are corrected while
typing. Is only effective when CTLSequenceChecking is true.falseSpecifies the type of text cursor movement (logical (0) or
visual (1)) within mixed text (RTL and LTR).0Specifies the type of numerals (Arabic (0), Hindi (1), system
settings (2) or Context(3)) is used per default in all
applications.0Specifies whether the whole user interface (UI) will be
mirrored. If true, the UI will be right-to-left. If false, the UI
will be left-to-right. If nil (the default), the UI will be mirrored
depending on the office locale.Use cfg package Jobs instead of this.Uses cfg package Jobs instead of this component.Use cfg package Jobs instead of this.Uses cfg package Jobs instead of this component.Use cfg package Jobs instead of this.Uses cfg package Jobs instead of this component.Contains settings for smart tags.Contains Writer specific settings for smart tags.Specifies whether smart tag recognition is enabled.trueA list of excluded smart tag types.Contains settings for Styles and Formatting.Specifies if the styles and formatting preview is enabled.true