/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include using namespace ::com::sun::star; namespace { /// Covers ooox/source/export/ fixes. class Test : public UnoApiXmlTest { public: Test() : UnoApiXmlTest(u"/oox/qa/unit/data/"_ustr) { } }; CPPUNIT_TEST_FIXTURE(Test, testPolylineConnectorPosition) { // Given a document with a group shape and therein a polyline and a connector. loadFromFile(u"tdf141786_PolylineConnectorInGroup.odt"); // When saving that to DOCX: save(u"Office Open XML Text"_ustr); // Then make sure polyline and connector have the correct position. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // For child elements of groups in Writer the position has to be adapted to be relative // to group instead of being relative to anchor. That was missing for polyline and // connector. // Polyline: Without fix it would have failed with expected: 0, actual: 1800360 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "x", u"0"); // ... failed with expected: 509400, actual: 1229400 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "y", u"509400"); // Connector: Without fix it would have failed with expected: 763200, actual: 2563560 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off", "x", u"763200"); // ... failed with expected: 0, actual: 720000 assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[3]/wps:spPr/a:xfrm/a:off", "y", u"0"); // Polyline and connector were shifted 1800360EMU right, 720000EMU down. } CPPUNIT_TEST_FIXTURE(Test, testRotatedShapePosition) { // Given a document with a group shape and therein a rotated custom shape. loadFromFile(u"tdf141786_RotatedShapeInGroup.odt"); // FIXME: validation error in OOXML export: Errors: 3 skipValidation(); // When saving that to DOCX: save(u"Office Open XML Text"_ustr); // Then make sure the rotated child shape has the correct position. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // For a group itself and for shapes outside of groups, the position calculation is done in // DocxSdrExport. For child elements of groups it has to be done in // DrawingML::WriteShapeTransformation(), but was missing. // Without fix it would have failed with expected: 469440, actual: 92160 // The shape was about 1cm shifted up and partly outside its group. assertXPath(pXmlDoc, "//wpg:wgp/wps:wsp[1]/wps:spPr/a:xfrm/a:off", "y", u"469440"); } CPPUNIT_TEST_FIXTURE(Test, testInsertCheckboxContentControlOdt) { loadFromFile(u"tdf141786_RotatedShapeInGroup.odt"); dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {}); dispatchCommand(mxComponent, u".uno:InsertCheckboxContentControl"_ustr, {}); save(u"Office Open XML Text"_ustr); // validate(maTempFile.GetFileName(), test::OOXML); // Enable when unrelated errors are fixed. } CPPUNIT_TEST_FIXTURE(Test, testInsertCheckboxContentControlDocx) { { loadFromFile(u"dml-groupshape-polygon.docx"); // Without TrackChanges, inserting the Checkbox works just fine // when exporting to docx. dispatchCommand(mxComponent, u".uno:InsertCheckboxContentControl"_ustr, {}); save(u"Office Open XML Text"_ustr); // validate(maTempFile.GetFileName(), test::OOXML); // Enable when unrelated errors are fixed. } { loadFromFile(u"dml-groupshape-polygon.docx"); uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference xText = xTextDocument->getText(); uno::Reference xCursor = xText->createTextCursor(); // With TrackChanges, the Checkbox causes an assertion in the sax serializer, // in void sax_fastparser::FastSaxSerializer::endFastElement(sal_Int32). // Element == maMarkStack.top()->m_DebugStartedElements.back() // sax/source/tools/fastserializer.cxx#402 dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {}); xText->insertControlCharacter(xCursor, text::ControlCharacter::PARAGRAPH_BREAK, false); dispatchCommand(mxComponent, u".uno:InsertCheckboxContentControl"_ustr, {}); // Loading should not show the "corrupted" dialog, which would assert. saveAndReload(u"Office Open XML Text"_ustr); // Now that we loaded it successfully, delete the controls, // still with change-tracking enabled, and save. dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:Delete"_ustr, {}); // Loading should not show the "corrupted" dialog, which would assert. saveAndReload(u"Office Open XML Text"_ustr); // validate(maTempFile.GetFileName(), test::OOXML); // Enable when unrelated errors are fixed. } } CPPUNIT_TEST_FIXTURE(Test, testDmlGroupshapePolygon) { // Given a document with a group shape, containing a single polygon child shape: loadFromFile(u"dml-groupshape-polygon.docx"); // FIXME: validation error in OOXML export: Errors: 9 skipValidation(); // When saving that to DOCX: save(u"Office Open XML Text"_ustr); // Then make sure that the group shape, the group shape's child size and the child shape's size // match: xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:ext", "cx", u"5328360"); // Without the accompanying fix in place, this test would have failed, the element was // not written. assertXPath(pXmlDoc, "//wpg:grpSpPr/a:xfrm/a:chExt", "cx", u"5328360"); assertXPath(pXmlDoc, "//wps:spPr/a:xfrm/a:ext", "cx", u"5328360"); } CPPUNIT_TEST_FIXTURE(Test, testCustomShapeArrowExport) { // Given a document with a few different kinds of arrow shapes in it: loadFromFile(u"tdf142602_CustomShapeArrows.odt"); // FIXME: validation error in OOXML export: Errors: 11 skipValidation(); // When saving that to DOCX: save(u"Office Open XML Text"_ustr); // Then the shapes should retain their correct control values. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Without the fix the output OOXML would have no tags in it. // Right arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"rightArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 46321"); // Left arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"leftArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 52939"); // Down arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"downArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[3]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 59399"); // Up arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"upArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[4]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 63885"); // Left-right arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"leftRightArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[5]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 53522"); // Up-down arrow assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"upDownArrow"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 50000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[6]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 62743"); // Right arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"rightArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 25002"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 25000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]", "fmla", u"val 25052"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[7]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]", "fmla", u"val 66667"); // Left arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"leftArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 25002"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 25000"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]", "fmla", u"val 25057"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[8]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]", "fmla", u"val 66673"); // Down arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"downArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 29415"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 29413"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]", "fmla", u"val 16667"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[9]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]", "fmla", u"val 66667"); // Up arrow callout assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom", "prst", u"upArrowCallout"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[1]", "fmla", u"val 31033"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[2]", "fmla", u"val 31030"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[3]", "fmla", u"val 16667"); assertXPath(pXmlDoc, "//w:r/mc:AlternateContent[10]/mc:Choice/w:drawing/wp:anchor/a:graphic/" "a:graphicData/wps:wsp/wps:spPr/a:prstGeom/a:avLst/a:gd[4]", "fmla", u"val 66660"); } CPPUNIT_TEST_FIXTURE(Test, testCameraRevolutionGrabBag) { // Given a PPTX file that contains camera revolution (rotation around z axis) applied shapes loadFromFile(u"camera-rotation-revolution-nonwps.pptx"); // When saving that document: save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the revolution is exported without a problem: // First shape textbox: assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:scene3d/a:camera/a:rot", "rev", u"5400000"); // Second shape rectangle: assertXPath(pXmlDoc, "//p:sp[2]/p:spPr/a:scene3d/a:camera/a:rot", "rev", u"18300000"); // Make sure Shape3DProperties don't leak under txBody // Without the accompanying fix in place, this test would have failed with: // - Expected: 0 // - Actual : 1 // - In <>, XPath '//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot' number of nodes is incorrect assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot", 0); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:bodyPr/a:scene3d/a:camera/a:rot", 0); } CPPUNIT_TEST_FIXTURE(Test, testReferToTheme) { // Given a PPTX file that contains references to a theme: loadFromFile(u"refer-to-theme.pptx"); // When saving that document: save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the shape text color is a scheme color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the element was not written. assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr", "val", u"accent1"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod", 0); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff", 0); // Second shape: lighter color: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr' number of nodes is incorrect // i.e. the effects case did not write scheme colors. assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr", "val", u"accent1"); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod", "val", u"40000"); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff", "val", u"60000"); // Third shape, darker color: assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr", "val", u"accent1"); assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumMod", "val", u"75000"); assertXPath(pXmlDoc, "//p:sp[3]/p:txBody/a:p/a:r/a:rPr/a:solidFill/a:schemeClr/a:lumOff", 0); } CPPUNIT_TEST_FIXTURE(Test, testThemeColor_ShapeFill) { // Given an ODP file that contains references to a theme for shape fill: loadFromFile(u"ReferenceShapeFill.fodp"); // When saving that document: save(u"Impress Office Open XML"_ustr); // Then make sure the shape fill color is a scheme color. // Note that this was already working from PPTX files via grab-bags, //so this test intentionally uses an ODP file as input. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr", "val", u"accent6"); assertXPath(pXmlDoc, "//p:sp[1]/p:spPr/a:solidFill/a:schemeClr/a:lumMod", "val", u"75000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf146690_endParagraphRunPropertiesNewLinesTextSize) { // Given a PPTX file that contains references to a theme: loadFromFile(u"endParaRPr-newline-textsize.pptx"); // When saving that document: save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Make sure the text size is exported correctly: // Without the accompanying fix in place, this test would have failed with: // - Expected: 500 // - Actual : 1800 // i.e. the endParaRPr 'size' wasn't exported correctly assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[1]/a:endParaRPr", "sz", u"500"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[2]/a:endParaRPr", "sz", u"500"); assertXPath(pXmlDoc, "//p:sp[1]/p:txBody/a:p[3]/a:endParaRPr", "sz", u"500"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_endsubpath) { // Given an odp file that contains a non-primitive custom shape with command N loadFromFile(u"tdf147978_endsubpath.odp"); // When saving that document: save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the pathLst has two child elements, // Without the accompanying fix in place, only one element a:path was exported. assertXPathChildren(pXmlDoc, "//a:pathLst", 2); // and make sure first path with no stroke, second with no fill assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "stroke", u"0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"none"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandA) { // Given an odp file that contains a non-primitive custom shape with command N loadFromFile(u"tdf147978_enhancedPath_commandA.odp"); // When saving that document: save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Then make sure the path has a child element arcTo. Prior to the fix that part of the curve was // not exported at all. In odp it is a command A. Such does not exist in OOXML and is therefore // exported as a:lnTo followed by a:arcTo assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo", 2); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", 1); // And assert its attribute values assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "wR", u"7200"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "hR", u"5400"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "stAng", u"7719588"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "swAng", u"-5799266"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandT) { // The odp file contains a non-primitive custom shape with commands MTZ loadFromFile(u"tdf147978_enhancedPath_commandT.odp"); // Export to pptx had only exported the command M and has used a wrong path size save(u"Impress Office Open XML"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File has draw:viewBox="0 0 216 216" assertXPath(pXmlDoc, "//a:pathLst/a:path", "w", u"216"); assertXPath(pXmlDoc, "//a:pathLst/a:path", "h", u"216"); // Command T is exported as lnTo followed by arcTo. assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo", 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo", 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", 1); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:close", 1); // And assert its values assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt", "x", u"108"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:moveTo/a:pt", "y", u"162"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt", "x", u"138"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:lnTo/a:pt", "y", u"110"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "wR", u"108"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "hR", u"54"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "stAng", u"18000000"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo", "swAng", u"18000000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandXY) { // The odp file contains a non-primitive custom shapes with commands XY loadFromFile(u"tdf147978_enhancedPath_commandXY.odp"); // Export to pptx had dropped commands X and Y. save(u"Impress Office Open XML"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File has draw:viewBox="0 0 10 10" assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "w", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "h", u"10"); // Shape has M 0 5 Y 5 0 10 5 5 10 F Y 0 5 N M 10 10 X 0 0 assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:moveTo/a:pt", "x", u"0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:moveTo/a:pt", "y", u"5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]", "wR", u"5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]", "hR", u"5"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]", "stAng", u"10800000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[1]", "swAng", u"5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[2]", "stAng", u"16200000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[2]", "swAng", u"5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[3]", "stAng", u"0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[3]", "swAng", u"5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[4]", "stAng", u"0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]/a:arcTo[4]", "swAng", u"-5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:moveTo/a:pt", "x", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:moveTo/a:pt", "y", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo", "wR", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo", "hR", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo", "stAng", u"5400000"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]/a:arcTo", "swAng", u"5400000"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_commandHIJK) { // The odp file contains a non-primitive custom shapes with commands H,I,J,K loadFromFile(u"tdf147978_enhancedPath_commandHIJK.odp"); // Export to pptx had dropped commands X and Y. save(u"Impress Office Open XML"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File has draw:viewBox="0 0 80 80" assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "w", u"80"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "h", u"80"); // File uses from back to front J (lighten), I (lightenLess), normal fill, K (darkenLess), // H (darken). New feature, old versions did not export these at all. assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "fill", u"lighten"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"lightenLess"); assertXPathNoAttribute(pXmlDoc, "//a:pathLst/a:path[3]", "fill"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "fill", u"darkenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[5]", "fill", u"darken"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147978_subpath) { // The odp file contains a non-primitive custom shapes with commands H,I,J,K loadFromFile(u"tdf147978_enhancedPath_subpath.pptx"); // Export to pptx had dropped the subpaths. save(u"Impress Office Open XML"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // File should have four subpaths with increasing path size assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "w", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "h", u"10"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "w", u"20"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "h", u"20"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]", "w", u"40"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]", "h", u"40"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "w", u"80"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "h", u"80"); } CPPUNIT_TEST_FIXTURE(Test, testTdf100391TextAreaRect) { // The document has a custom shape of type "non-primitive" to trigger the custGeom export loadFromFile(u"tdf100391_TextAreaRect.odp"); // When saving to PPTX the textarea rect was set to default instead of using the actual area save(u"Impress Office Open XML"_ustr); // Verify the markup. Without fix the values were l="l", t="t", r="r", b="b" xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); assertXPath(pXmlDoc, "//a:custGeom/a:rect", "l", u"textAreaLeft"); assertXPath(pXmlDoc, "//a:custGeom/a:rect", "t", u"textAreaTop"); assertXPath(pXmlDoc, "//a:custGeom/a:rect", "r", u"textAreaRight"); assertXPath(pXmlDoc, "//a:custGeom/a:rect", "b", u"textAreaBottom"); // The values are calculated in guides, for example assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]", "name", u"textAreaLeft"); assertXPath(pXmlDoc, "//a:custGeom/a:gdLst/a:gd[1]", "fmla", u"*/ 1440000 w 2880000"); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf109169_OctagonBevel) { // The odp file contains an "Octagon Bevel" shape. Such has shading not in commands H,I,J,K // but shading is generated in ctor of EnhancedCustomShape2d from the Type value. loadFromFile(u"tdf109169_OctagonBevel.odt"); // FIXME: validation error in OOXML export: Errors: 1 skipValidation(); // Export to docx had not written a:fill or a:stroke attributes at all. save(u"Office Open XML Text"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // File should have six subpaths, one with stroke and five with fill assertXPath(pXmlDoc, "//a:pathLst/a:path[1]", "stroke", u"0"); assertXPath(pXmlDoc, "//a:pathLst/a:path[2]", "fill", u"darkenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[3]", "fill", u"darken"); assertXPath(pXmlDoc, "//a:pathLst/a:path[4]", "fill", u"darken"); assertXPath(pXmlDoc, "//a:pathLst/a:path[5]", "fill", u"lightenLess"); assertXPath(pXmlDoc, "//a:pathLst/a:path[6]", "fill", u"lighten"); } CPPUNIT_TEST_FIXTURE(Test, testFaultyPathCommandsAWT) { // The odp file contains shapes whose path starts with command A, W, T or L. That is a faulty // path. LO is tolerant and renders it so that is makes a moveTo to the start point of the arc or // the end of the line respectively. Export to OOXML does the same now and writes a moveTo // instead of the normally used lnTo. If a lnTo is written, MS Office shows nothing of the shape. loadFromFile(u"FaultyPathStart.odp"); save(u"Impress Office Open XML"_ustr); // Verify the markup: xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // First child of a:path should be a moveTo in all four shapes. assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"); assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"); assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"); assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo"); } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchXY) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. The // line at right and bottom edge were positioned inside as if the shape had a square size. loadFromFile(u"tdf148784_StretchXY.odp"); save(u"Impress Office Open XML"_ustr); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // x-position of last segment should be same as path width. It was 21600 without fix. sal_Int32 nWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w") .toInt32(); sal_Int32 nPosX = getXPathContent( pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@x") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX); // y-position of last segment should be same as path height. It was 21600 without fix. sal_Int32 nHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h") .toInt32(); sal_Int32 nPosY = getXPathContent( pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:moveTo[4]/a:pt/@y") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandQ) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // They use formulas with 'right' and 'bottom'. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in wrong arcs on the right or bottom side of the shape. loadFromFile(u"tdf148784_StretchCommandQ.odp"); save(u"Impress Office Open XML"_ustr); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // x-position of second quadBezTo control should be same as path width. It was 21600 without fix. sal_Int32 nWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w") .toInt32(); sal_Int32 nPosX = getXPathContent( pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[2]/a:pt/@x") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nWidth, nPosX); // y-position of third quadBezTo control should be same as path height. It was 21600 without fix. sal_Int32 nHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h") .toInt32(); sal_Int32 nPosY = getXPathContent( pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:quadBezTo[3]/a:pt/@y") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHeight, nPosY); // The test reflects the state of Apr 2022. It needs to be adapted when export of handles and // guides is implemented. } CPPUNIT_TEST_FIXTURE(Test, testTdf148784StretchCommandVW) { // The document has a custom shapes of type "non-primitive" to trigger the custGeom export. // It should not need adaption when export of handles and guides is implemented because it // has only fixed values in the path. // When saving to PPTX the attributes stretchpoint-x and stretchpoint-y were not considered. // That results in circles instead of ellipses. loadFromFile(u"tdf148784_StretchCommandVW.odp"); save(u"Impress Office Open XML"_ustr); // Verify the markup. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // wR of first ArcTo in first shape should be same as path width/2. It was 10800 without fix. sal_Int32 nHalfWidth = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/@w") .toInt32() / 2; sal_Int32 nWR = getXPathContent(pXmlDoc, "//p:spTree/p:sp[1]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@wR") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchX", nHalfWidth, nWR); // hR of first ArcTo in second shape should be same as path height /2. It was 10800 without fix. sal_Int32 nHalfHeight = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/@h") .toInt32() / 2; sal_Int32 nHR = getXPathContent(pXmlDoc, "//p:spTree/p:sp[2]/p:spPr/a:custGeom/a:pathLst/a:path/a:arcTo[1]/@hR") .toInt32(); CPPUNIT_ASSERT_EQUAL_MESSAGE("StretchY", nHalfHeight, nHR); } CPPUNIT_TEST_FIXTURE(Test, testTdf149551VertPadding) { // The document has shape[1] with attribute vert="vert270" and shape[2] with vert="vert". The text // has paddings lIns="720000"=2cm, tIns="360000"=1cm, rIns="0" and bIns="0". // After load and save the paddings were rotated and a 90deg text rotation was added. loadFromFile(u"tdf149551_vert_and_padding.pptx"); save(u"Impress Office Open XML"_ustr); // Verify the markup. The values must be the same as in the original file. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); for (sal_Int32 i = 1; i <= 2; i++) { OString sElement = "//p:spTree/p:sp[" + OString::number(i) + "]/p:txBody/a:bodyPr"; assertXPath(pXmlDoc, sElement, "lIns", u"720000"); assertXPath(pXmlDoc, sElement, "tIns", u"360000"); assertXPath(pXmlDoc, sElement, "rIns", u"0"); assertXPath(pXmlDoc, sElement, "bIns", u"0"); assertXPathNoAttribute(pXmlDoc, sElement, "rot"); } } CPPUNIT_TEST_FIXTURE(Test, testTdf149538upright) { // The document has a shape with attribute upright="1" in the bodyPr element. On import it is // emulated by rotating the text area rectangle. On export there should be an upright="1" // attribute but no 'rot' attribute. Without the fix the 'rot' attribute with values from // the emulation was written out. loadFromFile(u"tdf149538_upright.pptx"); save(u"Impress Office Open XML"_ustr); // Verify the markup. The values must be the same as in the original file. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); assertXPath(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr", "upright", u"1"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp/p:txBody/a:bodyPr", "rot"); } CPPUNIT_TEST_FIXTURE(Test, testTdf151008VertAnchor) { loadFromFile(u"tdf151008_eaVertAnchor.pptx"); save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // The order of the shapes in the file is by name "Right", "Center", "Left", "RightMiddle", // "CenterMiddle" and "LeftMiddle". I access the shapes here by index, because the XPath is // easier then. // As of Sep 2022 LibreOffice does not write the default anchorCtr="0" // Right assertXPath(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr", "anchor", u"t"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[1]/p:txBody/a:bodyPr", "anchorCtr"); // Center assertXPath(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr", "anchor", u"ctr"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[2]/p:txBody/a:bodyPr", "anchorCtr"); // Left assertXPath(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr", "anchor", u"b"); assertXPathNoAttribute(pXmlDoc, "//p:spTree/p:sp[3]/p:txBody/a:bodyPr", "anchorCtr"); // RightMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr", "anchor", u"t"); assertXPath(pXmlDoc, "//p:spTree/p:sp[4]/p:txBody/a:bodyPr", "anchorCtr", u"1"); // CenterMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr", "anchor", u"ctr"); assertXPath(pXmlDoc, "//p:spTree/p:sp[5]/p:txBody/a:bodyPr", "anchorCtr", u"1"); // LeftMiddle assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr", "anchor", u"b"); assertXPath(pXmlDoc, "//p:spTree/p:sp[6]/p:txBody/a:bodyPr", "anchorCtr", u"1"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkBitmapFill) { // The document has a Fontwork shape with bitmap fill. loadFromFile(u"tdf128568_FontworkBitmapFill.odt"); // FIXME: validation error in OOXML export: Errors: 1 // Attribute ID is not allowed in element v:shape skipValidation(); // Saving that to DOCX: save(u"Office Open XML Text"_ustr); // Make sure it is exported to VML and has no txbxContent but a textpath element. Without fix it // was exported as DML 'abc transform', but that is not able to use bitmap fill in Word. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//mc:alternateContent", 0); assertXPath(pXmlDoc, "//v:shape/v:textbox/v:txbxContent", 0); assertXPath(pXmlDoc, "//v:shape/v:textpath", 1); // Without fix the bitmap was referenced by v:imagedata element. But that produces a picture // in Word not a WordArt shape. Instead a v:fill has to be used. assertXPath(pXmlDoc, "//v:shape/v:imagedata", 0); assertXPath(pXmlDoc, "//v:shape/v:fill", 1); assertXPath(pXmlDoc, "//v:shape/v:fill[@r:id]", 1); // The fill is set to 'stretched' in LO, that is type="frame" in VML. That was not implemented // in VML export. assertXPath(pXmlDoc, "//v:shape/v:fill", "type", u"frame"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkFontProperties) { // The document has five Fontwork shapes. They have bitmap fill and thus are exported to VML. // They differ in font properties e.g. font weight and character spacing. loadFromFile(u"tdf128568_FontworkFontProperties.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Make sure the style attribute of the textpath element has the needed items. Without fix only // font-family and font-size were written. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); OUString sStyle; // bold sStyle = getXPath(pXmlDoc, "(//v:shape)[1]/v:textpath", "style"); CPPUNIT_ASSERT(sStyle.indexOf("font-weight:bold") > -1); // italic sStyle = getXPath(pXmlDoc, "(//v:shape)[2]/v:textpath", "style"); CPPUNIT_ASSERT(sStyle.indexOf("font-style:italic") > -1); // character spacing 'very loose', 150 * 655, see escherex.cxx sStyle = getXPath(pXmlDoc, "(//v:shape)[3]/v:textpath", "style"); CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:98250f") > -1); // character spacing 'tight', 90 * 655, see escherex.cxx sStyle = getXPath(pXmlDoc, "(//v:shape)[4]/v:textpath", "style"); CPPUNIT_ASSERT(sStyle.indexOf("v-text-spacing:58950f") > -1); // same letter heights sStyle = getXPath(pXmlDoc, "(//v:shape)[5]/v:textpath", "style"); CPPUNIT_ASSERT(sStyle.indexOf("v-same-letter-heights:t") > -1); } CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkSlantUp) { // The document has a Fontwork shape type 'textSlantUp' (172). When exporting to docx, Word does // not recognize its markup as preset WordArt, because the used markup differs from what Word // expects for this type of shape. As a result Word saves the shape as having custom geometry // and such is not understand by LibreOffice. loadFromFile(u"tdf153296_VML_export_SlantUp.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. I could identify the following two problems to hinder Word from // accepting the markup. There might exist more problems. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Make sure a element exists and has an o:connecttype attribute assertXPath(pXmlDoc, "//v:shapetype/v:path", 1); assertXPath(pXmlDoc, "//v:shapetype/v:path[@o:connecttype]", 1); // Make sure the handle position is written without reference to a formula OUString sPosition = getXPath(pXmlDoc, "//v:h", "position"); CPPUNIT_ASSERT_EQUAL(sal_Int32(-1), sPosition.indexOf("@")); CPPUNIT_ASSERT_EQUAL(u"topLeft,#0"_ustr, sPosition); } CPPUNIT_TEST_FIXTURE(Test, testVMLFontworkArchUp) { // The document has a Fontwork shape type 'textArchUp' (172). When exporting to docx, the shape // was not exported as VML Fontwork but as a rectangle. loadFromFile(u"tdf153296_VML_export_ArchUpCurve.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Make sure there is no element assertXPath(pXmlDoc, "//v:rect", 0); // ..., but a element with subelement assertXPath(pXmlDoc, "//v:shapetype/v:textpath", 1); } CPPUNIT_TEST_FIXTURE(Test, testVMLAdjustmentExport) { // The document has a Fontwork shape type 'textCirclePour' (150). When exporting to docx, the // adjustment values were not exported at all. loadFromFile(u"tdf153246_VML_export_Fontwork_Adjustment.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Make sure an "adj" attribute exists assertXPath(pXmlDoc, "//v:shape[@adj]", 1); // ... and has the correct values OUString sAdjustments = getXPath(pXmlDoc, "//v:shape", "adj"); sal_Int32 nTokenStart = 0; OUString sAngle = sAdjustments.getToken(0, ',', nTokenStart); CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(-7341733), sAngle.toInt32(), 2); OUString sRadius = sAdjustments.copy(nTokenStart); CPPUNIT_ASSERT_DOUBLES_EQUAL(sal_Int32(5296), sRadius.toInt32(), 2); } CPPUNIT_TEST_FIXTURE(Test, testFontworkDirectColor) { // The document has a Fontwork shape with fill #2e8b57 plus 60% transparency and line color // #ff7f50 with 20% transparency. When exporting to docx, line color was not exported at all // and fill color was replaced with character color. loadFromFile(u"tdf51195_Fontwork_DirectColor.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); static constexpr OString sElement = "//w:txbxContent/w:p/w:r/w:rPr/"_ostr; // Make sure the fallback in has correct value. assertXPath(pXmlDoc, sElement + "w:color", "val", u"2E8B57"); // ... and exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textOutline", 1); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:solidFill/w14:srgbClr", "val", u"ff7f50"); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:solidFill/w14:srgbClr/w14:alpha", "val", u"20000"); assertXPath(pXmlDoc, sElement + "w14:textOutline/w14:round", 1); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr", "val", u"2e8b57"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:srgbClr/w14:alpha", "val", u"60000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkThemeColor) { // The document has a Fontwork shape with fill theme color 'lt2' and 50% darker, and a Fontwork // shape with theme color 'dk2' and 40% lighter. When exporting to docx, fill color was not // exported as theme color at all, and it was replaced with character color. loadFromFile(u"tdf51195_Fontwork_ThemeColor.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // shape with 'darker' OString sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[1]/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure the fallback in has correct values assertXPath(pXmlDoc, sElement + "w:color", "val", u"948A54"); assertXPath(pXmlDoc, sElement + "w:color", "themeColor", u"light2"); assertXPath(pXmlDoc, sElement + "w:color", "themeShade", u"80"); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val", u"bg2"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val", u"50000"); // shape with 'lighter' sElement = "/w:document/w:body/w:p[2]/w:r/mc:AlternateContent[2]/mc:Choice/w:drawing/wp:anchor/" "a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/w:rPr/"_ostr; // Make sure the fallback in has correct values assertXPath(pXmlDoc, sElement + "w:color", "val", u"558ED5"); assertXPath(pXmlDoc, sElement + "w:color", "themeColor", u"dark2"); assertXPath(pXmlDoc, sElement + "w:color", "themeTint", u"99"); // ... and w14:textFill exists and has correct values. assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr", "val", u"tx2"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumMod", "val", u"60000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:solidFill/w14:schemeClr/w14:lumOff", "val", u"40000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkDistance) { // LO ignores 'Spacing to Borders' of the 'Text Attributes' for Fontwork shapes. Word interprets // them. Make sure we force them to zero on export to docx, otherwise Word might wrap the text. loadFromFile(u"tdf51195_Fontwork_Distance.odt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPathAttrs(pXmlDoc, "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:bodyPr", { { "lIns", u"0" }, { "rIns", u"0" }, { "tIns", u"0" }, { "bIns", u"0" } }); } CPPUNIT_TEST_FIXTURE(Test, testFontworkLinGradientRGBColor) { // The document has a Fontwork shape with UI settings: linear gradient fill with angle 330deg, // start color #ffff00 (Yellow) with 'Intensity' 80%, end color #4682B4 (Steel Blue), Transition // Start 25% and solid transparency 30%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_linearGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 330deg gradient rotation = 120deg color transition direction assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang", u"7200000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled", u"0"); // Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"cccc00"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr/w14:alpha", "val", u"30000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"25000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"cccc00"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr/w14:alpha", "val", u"30000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"100000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"4682b4"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr/w14:alpha", "val", u"30000"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkAxialGradientTransparency) { // The document has a Fontwork shape with UI settings: solid fill theme color Accent3 25% darker, // Transparency gradient Type Axial with Angle 160deg, Transition start 40%, // Start value 5%, End value 90% // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_axialGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); // 160deg gradient rotation = 290deg (360deg-160deg+90deg) color transition direction assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "ang", u"17400000"); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:lin", "scaled", u"0"); // Make sure the color stops have correct position and color sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; // gradient is in transparency, color is always the same. for (char ch = '1'; ch <= '3'; ++ch) { assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr", "val", u"accent3"); assertXPath(pXmlDoc, sElement + "w14:gs[" + OStringChar(ch) + "]/w14:schemeClr/w14:lumMod", "val", u"75000"); } // transparency values are not exactly like in UI because converting through rgb-color. // border 40% in UI means 20% on each side. assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"20000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val", u"89800"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"50000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val", u"4710"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"80000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:alpha", "val", u"89800"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkRadialGradient) { // The document has a Fontwork shape with UI settings: gradient fill, Type radial, // From Color #40E0D0, To Color #FF0000, Center x|y 75%|20%, no transparency // Transition start 10% // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_radialGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"circle"); assertXPathAttrs( pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", u"75000" }, { "t", u"20000" }, { "r", u"25000" }, { "b", u"80000" } }); // Make sure the color stops have correct position and color // The first stop is duplicated to force Word to render the gradient same as LO. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"ff0000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"ff0000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"90000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"40e0d0"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkEllipticalGradient) { // The document has a Fontwork shape with UI settings: solid fill, Color #00008B (deep blue), // transparency gradient type Ellipsoid, Center x|y 50%|50%, Transition Start 50%, // Start 70%, End 0%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_ellipticalGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"circle"); assertXPathAttrs( pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", u"50000" }, { "t", u"50000" }, { "r", u"50000" }, { "b", u"50000" } }); // Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"00008b"); // stop is duplicated to force Word to same rendering as LO does. assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"00008b"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"50000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"00008b"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr/w14:alpha", "val", u"69800"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkSquareGradient) { // The document has a Fontwork shape with UI settings: gradient fill Type "Square (Quadratic)", // From Color #4963ef 40%, To Color #ffff6e 90%, Center x|y 100%|50%, // no transparency // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_squareGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"rect"); assertXPathAttrs(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", u"100000" }, { "t", u"50000" }, { "r", u"0" }, { "b", u"50000" } }); // Make sure the color stops have correct position and color // The 'intensity' property in the UI has a different algorithm than the 'lumMod' attribute in // OOXML. Therefore it cannot be exported as 'lumMod' but need to be incorporated into the color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:srgbClr", "val", u"e6e663"); assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:srgbClr", "val", u"e6e663"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"100000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:srgbClr", "val", u"1d4860"); } CPPUNIT_TEST_FIXTURE(Test, testFontworkRectGradient) { // The document has a Fontwork shape with UI settings: solid color theme Accent 4 60% lighter, // transparency gradient Type "Rectangular", Center x|y 50%|50%, Transition start 10%, // Start value 70%, End value 5%. // Without fix the gradient was not exported at all. loadFromFile(u"tdf51195_Fontwork_rectGradient.fodt"); // FIXME: tdf#153183 validation error in OOXML export: Errors: 1 // Attribute 'ID' is not allowed to appear in element 'v:shape'. skipValidation(); // Save to DOCX: save(u"Office Open XML Text"_ustr); // Examine the saved markup. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // path to shape text run properties OString sElement = "/w:document/w:body/w:p/w:r/mc:AlternateContent/mc:Choice/w:drawing/" "wp:anchor/a:graphic/a:graphicData/wps:wsp/wps:txbx/w:txbxContent/w:p/w:r/" "w:rPr/"_ostr; // Make sure w14:textFill and w14:gradFill elements exist with child elements assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst", 1); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:gsLst/w14:gs", 3); assertXPath(pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path", "path", u"rect"); assertXPathAttrs( pXmlDoc, sElement + "w14:textFill/w14:gradFill/w14:path/w14:fillToRect", { { "l", u"50000" }, { "t", u"50000" }, { "r", u"50000" }, { "b", u"50000" } }); // Make sure the color stops have correct position and color // transparency values are not exactly like in UI because converting through rgb-color. sElement += "w14:textFill/w14:gradFill/w14:gsLst/"; assertXPath(pXmlDoc, sElement + "w14:gs[1]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr", "val", u"accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumMod", "val", u"40000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:lumOff", "val", u"60000"); assertXPath(pXmlDoc, sElement + "w14:gs[1]/w14:schemeClr/w14:alpha", "val", u"4710"); // The first stop is duplicated to force Word to render the gradient same as LO. assertXPath(pXmlDoc, sElement + "w14:gs[2]", "pos", u"0"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr", "val", u"accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumMod", "val", u"40000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:lumOff", "val", u"60000"); assertXPath(pXmlDoc, sElement + "w14:gs[2]/w14:schemeClr/w14:alpha", "val", u"4710"); assertXPath(pXmlDoc, sElement + "w14:gs[3]", "pos", u"90000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr", "val", u"accent4"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:lumMod", "val", u"40000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:lumOff", "val", u"60000"); assertXPath(pXmlDoc, sElement + "w14:gs[3]/w14:schemeClr/w14:alpha", "val", u"69800"); } CPPUNIT_TEST_FIXTURE(Test, testThemeColorTransparency) { // The document has first a Fontwork shape with solid fill theme color with transparency and // outline transparency and second a textbox with character transparency. // Without fix the transparency was not written to file. loadFromFile(u"tdf139618_ThemeColorTransparency.pptx"); save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Make sure a:alpha is written for line color and for fill color. // Make sure fill color is a schemeClr. OString sElement = "/p:sld/p:cSld/p:spTree/p:sp[1]/p:txBody/a:p/a:r/a:rPr/"_ostr; assertXPath(pXmlDoc, sElement + "a:ln/a:solidFill/a:srgbClr/a:alpha", "val", u"25000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr", "val", u"accent1"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumMod", "val", u"60000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumOff", "val", u"40000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:alpha", "val", u"35000"); // Make sure a:alpha is written for characters and fill color is a schemeClr. sElement = "/p:sld/p:cSld/p:spTree/p:sp[2]/p:txBody/a:p/a:r/a:rPr/"_ostr; assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr", "val", u"accent4"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:lumMod", "val", u"75000"); assertXPath(pXmlDoc, sElement + "a:solidFill/a:schemeClr/a:alpha", "val", u"20000"); } CPPUNIT_TEST_FIXTURE(Test, testThemeFontTypeface) { // Saving the document had produced a file which PowerPoint wants to repair. The mandatory // attribute 'typeface' was missing in the elements. loadFromFile(u"tdf155412_typeface.pptx"); save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/theme/theme1.xml"_ustr); // Make sure typeface is written. OString sElement = "/a:theme/a:themeElements/a:fontScheme/"_ostr; assertXPath(pXmlDoc, sElement + "a:majorFont/a:ea", "typeface", u""); assertXPath(pXmlDoc, sElement + "a:minorFont/a:ea", "typeface", u""); } CPPUNIT_TEST_FIXTURE(Test, testTdf157289CircularArrowExport) { // The document has a custom shape of type "circular-arrow". Such uses a B command where // the ellipse bounding box is defined by bottom-right vertex first and then top-left vertex. // When saving to PPTX this had resulted in negative radii for the ellipse. loadFromFile(u"tdf157289_circularArrow_export.fodp"); save(u"Impress Office Open XML"_ustr); // Verify the markup. Both wR and hR must be positive. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo[1]", "wR", u"6750"); assertXPath(pXmlDoc, "//a:pathLst/a:path/a:arcTo[1]", "hR", u"6750"); } CPPUNIT_TEST_FIXTURE(Test, testTdf134401_ExportAutoGrowToTextWordWrap) { // pptx doesn't have autoGrowWidth and autoGrowHeight, but it does have TextWordWrap // which is similar. If autoGrowWidth and autoGrowHeight are set in the document, // then they are exported to pptx as TextWordWrap = "none". loadFromFile(u"tdf134401_ExportAutoGrowToTextWordWrap.odp"); save(u"Impress Office Open XML"_ustr); // There are 2 shapes in the test file. // The 1. shape is without autoGrowWidth/Height. // The 2. shape is with autoGrowWidth/Height. // Check if wrap="none" is exported for shape 2, but no wrap is exported for shape 1. xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); assertXPathNoAttribute(pXmlDoc, "//p:sp[1]/p:txBody/a:bodyPr", "wrap"); assertXPath(pXmlDoc, "//p:sp[2]/p:txBody/a:bodyPr", "wrap", u"none"); } CPPUNIT_TEST_FIXTURE(Test, testTdf163803_ImageFill) { loadFromFile(u"tdf163803_image_with_fill.pptx"); save(u"Impress Office Open XML"_ustr); xmlDocUniquePtr pXmlDoc = parseExport(u"ppt/slides/slide1.xml"_ustr); // Check that the fill color is saved: // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - In <>, XPath '//p:pic/p:spPr/a:solidFill' number of nodes is incorrect // i.e. the element was not written. assertXPath(pXmlDoc, "//p:pic/p:spPr/a:solidFill"); assertXPath(pXmlDoc, "//p:pic/p:spPr/a:solidFill/a:srgbClr", "val", u"000000"); } } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */