/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include "docprophandler.hxx"

#include <com/sun/star/beans/PropertyAttribute.hpp>
#include <com/sun/star/beans/PropertyExistException.hpp>
#include <com/sun/star/lang/IllegalArgumentException.hpp>
#include <com/sun/star/lang/Locale.hpp>
#include <com/sun/star/xml/sax/SAXException.hpp>

#include <osl/time.h>
#include <osl/diagnose.h>
#include <i18nlangtag/languagetag.hxx>

#include <vector>
#include <boost/algorithm/string.hpp>

#include "oox/helper/attributelist.hxx"

using namespace ::com::sun::star;

namespace oox {
namespace docprop {

OOXMLDocPropHandler::OOXMLDocPropHandler( const uno::Reference< uno::XComponentContext >& xContext,
                                          const uno::Reference< document::XDocumentProperties >& rDocProp )
    : m_xDocProp( rDocProp )
    , m_nState( 0 )
    , m_nBlock( 0 )
    , m_nType( 0 )
    , m_nInBlock( 0 )
    , m_CustomStringPropertyState(NONE)
{
    if ( !xContext.is() || !rDocProp.is() )
        throw uno::RuntimeException();
}

OOXMLDocPropHandler::~OOXMLDocPropHandler()
{
}

void OOXMLDocPropHandler::InitNew()
{
    m_nState = 0;
    m_nBlock = 0;
    m_aCustomPropertyName.clear();
    m_nType = 0;
    m_nInBlock = 0;
    m_CustomStringPropertyState = NONE;
}

void OOXMLDocPropHandler::AddCustomProperty( const uno::Any& aAny )
{
    if ( !m_aCustomPropertyName.isEmpty() )
    {
        const uno::Reference< beans::XPropertyContainer > xUserProps =
            m_xDocProp->getUserDefinedProperties();
        if ( !xUserProps.is() )
            throw uno::RuntimeException();

        try
        {
            xUserProps->addProperty( m_aCustomPropertyName,
                    beans::PropertyAttribute::REMOVABLE, aAny );
        }
        catch( beans::PropertyExistException& )
        {
            // conflicts with core and extended properties are possible
        }
        catch( uno::Exception& )
        {
            OSL_FAIL( "Can not add custom property!" );
        }
    }
}

util::DateTime OOXMLDocPropHandler::GetDateTimeFromW3CDTF( const OUString& aChars )
{
    oslDateTime aOslDTime = { 0, 0, 0, 0, 0, 0, 0, 0 };
    const sal_Int32 nLen = aChars.getLength();
    if ( nLen >= 4 )
    {
        aOslDTime.Year = (sal_Int16)aChars.copy( 0, 4 ).toInt32();

        if ( nLen >= 7 && aChars[4] == (sal_Unicode)'-' )
        {
            aOslDTime.Month = (sal_uInt16)aChars.copy( 5, 2 ).toInt32();

            if ( nLen >= 10 && aChars[7] == (sal_Unicode)'-' )
            {
                aOslDTime.Day = (sal_uInt16)aChars.copy( 8, 2 ).toInt32();

                if ( nLen >= 16 && aChars[10] == (sal_Unicode)'T' && aChars[13] == (sal_Unicode)':' )
                {
                    aOslDTime.Hours = (sal_uInt16)aChars.copy( 11, 2 ).toInt32();
                    aOslDTime.Minutes = (sal_uInt16)aChars.copy( 14, 2 ).toInt32();

                    sal_Int32 nOptTime = 0;
                    if ( nLen >= 19 && aChars[16] == (sal_Unicode)':' )
                    {
                        aOslDTime.Seconds = (sal_uInt16)aChars.copy( 17, 2 ).toInt32();
                        nOptTime += 3;
                        if ( nLen >= 20 && aChars[19] == (sal_Unicode)'.' )
                        {
                            nOptTime += 1;
                            sal_Int32 digitPos = 20;
                            while (nLen > digitPos && digitPos < 29)
                            {
                                sal_Unicode c = aChars[digitPos];
                                if ( c < '0' || c > '9')
                                    break;
                                aOslDTime.NanoSeconds *= 10;
                                aOslDTime.NanoSeconds += c - '0';
                                ++digitPos;
                            }
                            if ( digitPos < 29 )
                            {
                                // read less digits than 9
                                // add correct exponent of 10
                                nOptTime += digitPos - 20;
                                for(; digitPos<29; ++digitPos)
                                {
                                    aOslDTime.NanoSeconds *= 10;
                                }
                            }
                            else
                            {
                                //skip digits with more precision than we can handle
                                while(nLen > digitPos)
                                {
                                    sal_Unicode c = aChars[digitPos];
                                    if ( c < '0' || c > '9')
                                        break;
                                    ++digitPos;
                                }
                                nOptTime += digitPos - 20;
                            }
                        }
                    }

                    sal_Int32 nModif = 0;
                    if ( nLen >= 16 + nOptTime + 6 )
                    {
                        if ( ( aChars[16 + nOptTime] == (sal_Unicode)'+' || aChars[16 + nOptTime] == (sal_Unicode)'-' )
                          && aChars[16 + nOptTime + 3] == (sal_Unicode)':' )
                        {
                            nModif = aChars.copy( 16 + nOptTime + 1, 2 ).toInt32() * 3600;
                            nModif += aChars.copy( 16 + nOptTime + 4, 2 ).toInt32() * 60;
                            if ( aChars[16 + nOptTime] == (sal_Unicode)'-' )
                                nModif *= -1;
                        }
                    }

                    if ( nModif )
                    {
                        // convert to UTC time
                        TimeValue aTmp;
                        if ( osl_getTimeValueFromDateTime( &aOslDTime, &aTmp ) )
                        {
                            aTmp.Seconds -= nModif;
                            osl_getDateTimeFromTimeValue( &aTmp, &aOslDTime );
                        }
                    }
                }
            }
        }
    }

    return util::DateTime( aOslDTime.NanoSeconds, aOslDTime.Seconds,
            aOslDTime.Minutes, aOslDTime.Hours,
            aOslDTime.Day, aOslDTime.Month, aOslDTime.Year, false);
}

uno::Sequence< OUString > OOXMLDocPropHandler::GetKeywordsSet( const OUString& aChars )
{
    if ( !aChars.isEmpty() )
    {
        std::string aUtf8Chars = OUStringToOString( aChars, RTL_TEXTENCODING_UTF8 ).getStr();
        std::vector<std::string> aUtf8Result;
        boost::split( aUtf8Result, aUtf8Chars, boost::is_any_of(" ,;:\t"), boost::token_compress_on );

        if (!aUtf8Result.empty())
        {
            uno::Sequence< OUString > aResult( aUtf8Result.size() );
            OUString* pResultValues = aResult.getArray();
            for ( std::vector< std::string >::const_iterator i = aUtf8Result.begin();
                  i != aUtf8Result.end(); ++i, ++pResultValues )
                *pResultValues = OUString( i->c_str(), static_cast< sal_Int32 >( i->size() ),RTL_TEXTENCODING_UTF8 );

            return aResult;
        }
    }
    return uno::Sequence< OUString >();
}

void OOXMLDocPropHandler::UpdateDocStatistic( const OUString& aChars )
{
    uno::Sequence< beans::NamedValue > aSet = m_xDocProp->getDocumentStatistics();
    OUString aName;

    switch( m_nBlock )
    {
    case EXTPR_TOKEN( Characters ):
        aName = "NonWhitespaceCharacterCount";
        break;

    case EXTPR_TOKEN( CharactersWithSpaces ):
        aName = "CharacterCount";
        break;

    case EXTPR_TOKEN( Pages ):
        aName = "PageCount";
        break;

    case EXTPR_TOKEN( Words ):
        aName = "WordCount";
        break;

    case EXTPR_TOKEN( Paragraphs ):
        aName = "ParagraphCount";
        break;

    default:
        OSL_FAIL( "Unexpected statistic!" );
        break;
    }

    if ( !aName.isEmpty() )
    {
        bool bFound = false;
        sal_Int32 nLen = aSet.getLength();
        for ( sal_Int32 nInd = 0; nInd < nLen; nInd++ )
            if ( aSet[nInd].Name.equals( aName ) )
            {
                aSet[nInd].Value = uno::makeAny( aChars.toInt32() );
                bFound = true;
                break;
            }

        if ( !bFound )
        {
            aSet.realloc( nLen + 1 );
            aSet[nLen].Name = aName;
            aSet[nLen].Value = uno::makeAny( aChars.toInt32() );
        }

        m_xDocProp->setDocumentStatistics( aSet );
    }
}

// com.sun.star.xml.sax.XFastDocumentHandler

void SAL_CALL OOXMLDocPropHandler::startDocument()
{
}

void SAL_CALL OOXMLDocPropHandler::endDocument()
{
    InitNew();
}

void SAL_CALL OOXMLDocPropHandler::setDocumentLocator( const uno::Reference< xml::sax::XLocator >& )
{
}

// com.sun.star.xml.sax.XFastContextHandler

void SAL_CALL OOXMLDocPropHandler::startFastElement( ::sal_Int32 nElement, const uno::Reference< xml::sax::XFastAttributeList >& xAttribs )
{
    if ( !m_nInBlock && !m_nState )
    {
        if ( nElement == COREPR_TOKEN( coreProperties )
          || nElement == EXTPR_TOKEN( Properties )
          || nElement == CUSTPR_TOKEN( Properties ) )
        {
            m_nState = nElement;
        }
        else
        {
                OSL_FAIL( "Unexpected file format!" );
        }
    }
    else if ( m_nState && m_nInBlock == 1 ) // that tag should contain the property name
    {
        // Currently the attributes are ignored for the core properties since the only
        // known attribute is xsi:type that can only be used with dcterms:created and
        // dcterms:modified, and this element is allowed currently to have only one value dcterms:W3CDTF
        m_nBlock = nElement;

        if ( xAttribs.is() && xAttribs->hasAttribute( XML_name ) )
            m_aCustomPropertyName = xAttribs->getValue( XML_name );
    }
    else if ( m_nState && m_nInBlock == 2 && getNamespace( nElement ) == NMSP_officeDocPropsVT )
    {
        m_nType = nElement;
    }
    else
    {
        SAL_WARN("oox", "OOXMLDocPropHandler::startFastElement: unknown element " << getBaseToken(nElement));
    }

    if ( m_nInBlock == SAL_MAX_INT32 )
        throw uno::RuntimeException();

    m_nInBlock++;
}

void SAL_CALL OOXMLDocPropHandler::startUnknownElement( const OUString& aNamespace, const OUString& aName, const uno::Reference< xml::sax::XFastAttributeList >& )
{
    SAL_WARN("oox", "Unknown element " << aNamespace << ":" << aName);

    if ( m_nInBlock == SAL_MAX_INT32 )
        throw uno::RuntimeException();

    m_nInBlock++;
}

void SAL_CALL OOXMLDocPropHandler::endFastElement( ::sal_Int32 )
{
    if ( m_nInBlock )
    {
        m_nInBlock--;

        if ( !m_nInBlock )
            m_nState = 0;
        else if ( m_nInBlock == 1 )
        {
            m_nBlock = 0;
            m_aCustomPropertyName.clear();
        }
        else if ( m_nInBlock == 2 )
        {
            if (   m_nState == CUSTPR_TOKEN(Properties)
                && m_nBlock == CUSTPR_TOKEN(property))
            {
                switch (m_nType)
                {
                    case VT_TOKEN(bstr):
                    case VT_TOKEN(lpstr):
                    case VT_TOKEN(lpwstr):
                        if (!m_aCustomPropertyName.isEmpty() &&
                            INSERTED != m_CustomStringPropertyState)
                        {
                            // the property has string type, so it is valid
                            // even with an empty value - characters() has
                            // not been called in that case
                            AddCustomProperty(uno::makeAny(OUString()));
                        }
                    break;
                }
            }
            m_CustomStringPropertyState = NONE;
            m_nType = 0;
        }
    }
}

void SAL_CALL OOXMLDocPropHandler::endUnknownElement( const OUString&, const OUString& )
{
    if ( m_nInBlock )
        m_nInBlock--;
}

uno::Reference< xml::sax::XFastContextHandler > SAL_CALL OOXMLDocPropHandler::createFastChildContext( ::sal_Int32, const uno::Reference< xml::sax::XFastAttributeList >& )
{
    // Should the arguments be parsed?
    return uno::Reference< xml::sax::XFastContextHandler >( static_cast< xml::sax::XFastContextHandler* >( this ) );
}

uno::Reference< xml::sax::XFastContextHandler > SAL_CALL OOXMLDocPropHandler::createUnknownChildContext( const OUString&, const OUString&, const uno::Reference< xml::sax::XFastAttributeList >& )
{
    return uno::Reference< xml::sax::XFastContextHandler >( static_cast< xml::sax::XFastContextHandler* >( this ) );
}

void SAL_CALL OOXMLDocPropHandler::characters( const OUString& aChars )
{
    try
    {
        if ( (m_nInBlock == 2) || ((m_nInBlock == 3) && m_nType) )
        {
            if ( m_nState == COREPR_TOKEN( coreProperties ) )
            {
                switch( m_nBlock )
                {
                case COREPR_TOKEN( category ):
                    m_aCustomPropertyName = "category";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case COREPR_TOKEN( contentStatus ):
                    m_aCustomPropertyName = "contentStatus";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case COREPR_TOKEN( contentType ):
                    m_aCustomPropertyName = "contentType";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case COREPR_TOKEN( identifier ):
                    m_aCustomPropertyName = "identifier";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case COREPR_TOKEN( version ):
                    m_aCustomPropertyName = "version";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case DCT_TOKEN( created ):
                    if ( aChars.getLength() >= 4 )
                        m_xDocProp->setCreationDate( GetDateTimeFromW3CDTF( aChars ) );
                    break;

                case DC_TOKEN( creator ):
                    m_xDocProp->setAuthor( aChars );
                    break;

                case DC_TOKEN( description ):
                    m_xDocProp->setDescription( aChars );
                    break;

                case COREPR_TOKEN( keywords ):
                    m_xDocProp->setKeywords( GetKeywordsSet( aChars ) );
                    break;

                case DC_TOKEN( language ):
                    if ( aChars.getLength() >= 2 )
                        m_xDocProp->setLanguage( LanguageTag::convertToLocale( aChars) );
                    break;

                case COREPR_TOKEN( lastModifiedBy ):
                    m_xDocProp->setModifiedBy( aChars );
                    break;

                case COREPR_TOKEN( lastPrinted ):
                    if ( aChars.getLength() >= 4 )
                        m_xDocProp->setPrintDate( GetDateTimeFromW3CDTF( aChars ) );
                    break;

                case DCT_TOKEN( modified ):
                    if ( aChars.getLength() >= 4 )
                        m_xDocProp->setModificationDate( GetDateTimeFromW3CDTF( aChars ) );
                    break;

                case COREPR_TOKEN( revision ):
                    try
                    {
                        m_xDocProp->setEditingCycles(
                            static_cast<sal_Int16>(aChars.toInt32()) );
                    }
                    catch (lang::IllegalArgumentException &)
                    {
                        // ignore
                    }
                    break;

                case DC_TOKEN( subject ):
                    m_xDocProp->setSubject( m_xDocProp->getSubject() + aChars );
                    break;

                case DC_TOKEN( title ):
                    m_xDocProp->setTitle( m_xDocProp->getTitle() + aChars );
                    break;

                default:
                    OSL_FAIL( "Unexpected core property!" );
                }
            }
            else if ( m_nState == EXTPR_TOKEN( Properties ) )
            {
                switch( m_nBlock )
                {
                case EXTPR_TOKEN( Application ):
                    m_xDocProp->setGenerator( aChars );
                    break;

                case EXTPR_TOKEN( Template ):
                    m_xDocProp->setTemplateName( aChars );
                    break;

                case EXTPR_TOKEN( TotalTime ):
                    try
                    {
                        // The TotalTime is in mins as per ECMA specification.
                        m_xDocProp->setEditingDuration( aChars.toInt32() * 60 );
                    }
                    catch (lang::IllegalArgumentException &)
                    {
                        // ignore
                    }
                    break;

                case EXTPR_TOKEN( Characters ):
                case EXTPR_TOKEN( CharactersWithSpaces ):
                case EXTPR_TOKEN( Pages ):
                case EXTPR_TOKEN( Words ):
                case EXTPR_TOKEN( Paragraphs ):
                    UpdateDocStatistic( aChars );
                break;

                case EXTPR_TOKEN( HyperlinksChanged ):
                    m_aCustomPropertyName = "HyperlinksChanged";
                    AddCustomProperty( uno::makeAny( aChars.toBoolean() ) ); // the property has boolean type
                    break;

                case EXTPR_TOKEN( LinksUpToDate ):
                    m_aCustomPropertyName = "LinksUpToDate";
                    AddCustomProperty( uno::makeAny( aChars.toBoolean() ) ); // the property has boolean type
                    break;

                case EXTPR_TOKEN( ScaleCrop ):
                    m_aCustomPropertyName = "ScaleCrop";
                    AddCustomProperty( uno::makeAny( aChars.toBoolean() ) ); // the property has boolean type
                    break;

                case EXTPR_TOKEN( SharedDoc ):
                    m_aCustomPropertyName = "ShareDoc";
                    AddCustomProperty( uno::makeAny( aChars.toBoolean() ) ); // the property has boolean type
                    break;

                case EXTPR_TOKEN( DocSecurity ):
                    m_aCustomPropertyName = "DocSecurity";
                    AddCustomProperty( uno::makeAny( aChars.toInt32() ) ); // the property has sal_Int32 type
                    break;

                case EXTPR_TOKEN( HiddenSlides ):
                    m_aCustomPropertyName = "HiddenSlides";
                    AddCustomProperty( uno::makeAny( aChars.toInt32() ) ); // the property has sal_Int32 type
                    break;

                case EXTPR_TOKEN( MMClips ):
                    m_aCustomPropertyName = "MMClips";
                    AddCustomProperty( uno::makeAny( aChars.toInt32() ) ); // the property has sal_Int32 type
                    break;

                case EXTPR_TOKEN( Notes ):
                    m_aCustomPropertyName = "Notes";
                    AddCustomProperty( uno::makeAny( aChars.toInt32() ) ); // the property has sal_Int32 type
                    break;

                case EXTPR_TOKEN( Slides ):
                    m_aCustomPropertyName = "Slides";
                    AddCustomProperty( uno::makeAny( aChars.toInt32() ) ); // the property has sal_Int32 type
                    break;

                case EXTPR_TOKEN( AppVersion ):
                    m_aCustomPropertyName = "AppVersion";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case EXTPR_TOKEN( Company ):
                    m_aCustomPropertyName = "Company";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case EXTPR_TOKEN( HyperlinkBase ):
                    m_aCustomPropertyName = "HyperlinkBase";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case EXTPR_TOKEN( Manager ):
                    m_aCustomPropertyName = "Manager";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case EXTPR_TOKEN( PresentationFormat ):
                    m_aCustomPropertyName = "PresentationFormat";
                    AddCustomProperty( uno::makeAny( aChars ) ); // the property has string type
                    break;

                case EXTPR_TOKEN( Lines ):
                case EXTPR_TOKEN( DigSig ):
                case EXTPR_TOKEN( HeadingPairs ):
                case EXTPR_TOKEN( HLinks ):
                case EXTPR_TOKEN( TitlesOfParts ):
                    // ignored during the import currently
                    break;

                default:
                    OSL_FAIL( "Unexpected extended property!" );
                }
            }
            else if ( m_nState == CUSTPR_TOKEN( Properties ) )
            {
                if ( m_nBlock == CUSTPR_TOKEN( property ) )
                {
                    // this is a custom property
                    switch( m_nType )
                    {
                    case VT_TOKEN( bool ):
                        AddCustomProperty( uno::makeAny( aChars.toBoolean() ) );
                        break;

                    case VT_TOKEN( bstr ):
                    case VT_TOKEN( lpstr ):
                    case VT_TOKEN( lpwstr ):
                        // the property has string type
                        AddCustomProperty( uno::makeAny( AttributeConversion::decodeXString( aChars ) ) );
                        m_CustomStringPropertyState = INSERTED;
                        break;

                    case VT_TOKEN( date ):
                    case VT_TOKEN( filetime ):
                        AddCustomProperty( uno::makeAny( GetDateTimeFromW3CDTF( aChars ) ) );
                        break;

                    case VT_TOKEN( i1 ):
                    case VT_TOKEN( i2 ):
                        AddCustomProperty( uno::makeAny( (sal_Int16)aChars.toInt32() ) );
                        break;

                    case VT_TOKEN( i4 ):
                    case VT_TOKEN( int ):
                        AddCustomProperty( uno::makeAny( aChars.toInt32() ) );
                        break;

                    case VT_TOKEN( i8 ):
                        AddCustomProperty( uno::makeAny( aChars.toInt64() ) );
                        break;

                    case VT_TOKEN( r4 ):
                        AddCustomProperty( uno::makeAny( aChars.toFloat() ) );
                        break;

                    case VT_TOKEN( r8 ):
                        AddCustomProperty( uno::makeAny( aChars.toDouble() ) );
                        break;

                    default:
                        // all the other types are ignored;
                        break;
                    }
                }
                else
                {
                    OSL_FAIL( "Unexpected tag in custom property!" );
                }
            }
        }
    }
    catch( uno::RuntimeException& )
    {
        throw;
    }
    catch( xml::sax::SAXException& )
    {
        throw;
    }
    catch( uno::Exception& e )
    {
        throw xml::sax::SAXException(
            "Error while setting document property!",
            uno::Reference< uno::XInterface >(),
            uno::makeAny( e ) );
    }
}

} // namespace docprop
} // namespace oox

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */

<option value='feature/tscp3'>feature/tscp3</option>
<option value='feature/unitver'>feature/unitver</option>
<option value='feature/unocrsrptr'>feature/unocrsrptr</option>
<option value='feature/unostyles'>feature/unostyles</option>
<option value='feature/unostyles2'>feature/unostyles2</option>
<option value='feature/unostyles3'>feature/unostyles3</option>
<option value='feature/use-ogl-context-in-canvas'>feature/use-ogl-context-in-canvas</option>
<option value='feature/vcl-opengl'>feature/vcl-opengl</option>
<option value='feature/vcl-opengl-integration'>feature/vcl-opengl-integration</option>
<option value='feature/vcl-opengl2'>feature/vcl-opengl2</option>
<option value='feature/vclptr'>feature/vclptr</option>
<option value='feature/vlc'>feature/vlc</option>
<option value='feature/vlc-rb'>feature/vlc-rb</option>
<option value='feature/vs2012'>feature/vs2012</option>
<option value='feature/wasm'>feature/wasm</option>
<option value='feature/window-iter'>feature/window-iter</option>
<option value='feature/windows-cross-build'>feature/windows-cross-build</option>
<option value='feature/windowsupdater'>feature/windowsupdater</option>
<option value='feature/xtiledrenderable'>feature/xtiledrenderable</option>
<option value='libreoffice-24-2'>libreoffice-24-2</option>
<option value='libreoffice-24-2-0'>libreoffice-24-2-0</option>
<option value='libreoffice-24-2-1'>libreoffice-24-2-1</option>
<option value='libreoffice-24-2-2'>libreoffice-24-2-2</option>
<option value='libreoffice-24-2-3'>libreoffice-24-2-3</option>
<option value='libreoffice-24-2-4'>libreoffice-24-2-4</option>
<option value='libreoffice-24-2-5'>libreoffice-24-2-5</option>
<option value='libreoffice-24-8'>libreoffice-24-8</option>
<option value='libreoffice-24-8-0'>libreoffice-24-8-0</option>
<option value='libreoffice-3-5'>libreoffice-3-5</option>
<option value='libreoffice-3-5-0'>libreoffice-3-5-0</option>
<option value='libreoffice-3-5-1'>libreoffice-3-5-1</option>
<option value='libreoffice-3-5-2'>libreoffice-3-5-2</option>
<option value='libreoffice-3-5-3'>libreoffice-3-5-3</option>
<option value='libreoffice-3-5-4'>libreoffice-3-5-4</option>
<option value='libreoffice-3-5-5'>libreoffice-3-5-5</option>
<option value='libreoffice-3-5-6'>libreoffice-3-5-6</option>
<option value='libreoffice-3-5-7'>libreoffice-3-5-7</option>
<option value='libreoffice-3-6'>libreoffice-3-6</option>
<option value='libreoffice-3-6-0'>libreoffice-3-6-0</option>
<option value='libreoffice-3-6-1'>libreoffice-3-6-1</option>
<option value='libreoffice-3-6-2'>libreoffice-3-6-2</option>
<option value='libreoffice-3-6-3'>libreoffice-3-6-3</option>
<option value='libreoffice-3-6-4'>libreoffice-3-6-4</option>
<option value='libreoffice-3-6-5'>libreoffice-3-6-5</option>
<option value='libreoffice-3-6-6'>libreoffice-3-6-6</option>
<option value='libreoffice-3-6-7'>libreoffice-3-6-7</option>
<option value='libreoffice-4-0'>libreoffice-4-0</option>
<option value='libreoffice-4-0-0'>libreoffice-4-0-0</option>
<option value='libreoffice-4-0-1'>libreoffice-4-0-1</option>
<option value='libreoffice-4-0-2'>libreoffice-4-0-2</option>
<option value='libreoffice-4-0-3'>libreoffice-4-0-3</option>
<option value='libreoffice-4-0-4'>libreoffice-4-0-4</option>
<option value='libreoffice-4-0-5'>libreoffice-4-0-5</option>
<option value='libreoffice-4-0-6'>libreoffice-4-0-6</option>
<option value='libreoffice-4-1'>libreoffice-4-1</option>
<option value='libreoffice-4-1-0'>libreoffice-4-1-0</option>
<option value='libreoffice-4-1-1'>libreoffice-4-1-1</option>
<option value='libreoffice-4-1-2'>libreoffice-4-1-2</option>
<option value='libreoffice-4-1-3'>libreoffice-4-1-3</option>
<option value='libreoffice-4-1-4'>libreoffice-4-1-4</option>
<option value='libreoffice-4-1-5'>libreoffice-4-1-5</option>
<option value='libreoffice-4-1-6'>libreoffice-4-1-6</option>
<option value='libreoffice-4-2'>libreoffice-4-2</option>
<option value='libreoffice-4-2-0'>libreoffice-4-2-0</option>
<option value='libreoffice-4-2-1'>libreoffice-4-2-1</option>
<option value='libreoffice-4-2-2'>libreoffice-4-2-2</option>
<option value='libreoffice-4-2-3'>libreoffice-4-2-3</option>
<option value='libreoffice-4-2-4'>libreoffice-4-2-4</option>
<option value='libreoffice-4-2-5'>libreoffice-4-2-5</option>
<option value='libreoffice-4-2-6'>libreoffice-4-2-6</option>
<option value='libreoffice-4-2-7'>libreoffice-4-2-7</option>
<option value='libreoffice-4-2-8'>libreoffice-4-2-8</option>
<option value='libreoffice-4-3'>libreoffice-4-3</option>
<option value='libreoffice-4-3-0'>libreoffice-4-3-0</option>
<option value='libreoffice-4-3-1'>libreoffice-4-3-1</option>
<option value='libreoffice-4-3-2'>libreoffice-4-3-2</option>
<option value='libreoffice-4-3-3'>libreoffice-4-3-3</option>
<option value='libreoffice-4-3-4'>libreoffice-4-3-4</option>
<option value='libreoffice-4-3-5'>libreoffice-4-3-5</option>
<option value='libreoffice-4-3-6'>libreoffice-4-3-6</option>
<option value='libreoffice-4-3-7'>libreoffice-4-3-7</option>
<option value='libreoffice-4-4'>libreoffice-4-4</option>
<option value='libreoffice-4-4-0'>libreoffice-4-4-0</option>
<option value='libreoffice-4-4-1'>libreoffice-4-4-1</option>
<option value='libreoffice-4-4-2'>libreoffice-4-4-2</option>
<option value='libreoffice-4-4-3'>libreoffice-4-4-3</option>
<option value='libreoffice-4-4-4'>libreoffice-4-4-4</option>
<option value='libreoffice-4-4-5'>libreoffice-4-4-5</option>
<option value='libreoffice-4-4-6'>libreoffice-4-4-6</option>
<option value='libreoffice-4-4-7'>libreoffice-4-4-7</option>
<option value='libreoffice-5-0'>libreoffice-5-0</option>
<option value='libreoffice-5-0-0'>libreoffice-5-0-0</option>
<option value='libreoffice-5-0-1'>libreoffice-5-0-1</option>
<option value='libreoffice-5-0-2'>libreoffice-5-0-2</option>
<option value='libreoffice-5-0-3'>libreoffice-5-0-3</option>
<option value='libreoffice-5-0-4'>libreoffice-5-0-4</option>
<option value='libreoffice-5-0-5'>libreoffice-5-0-5</option>
<option value='libreoffice-5-0-6'>libreoffice-5-0-6</option>
<option value='libreoffice-5-1'>libreoffice-5-1</option>
<option value='libreoffice-5-1-0'>libreoffice-5-1-0</option>
<option value='libreoffice-5-1-1'>libreoffice-5-1-1</option>
<option value='libreoffice-5-1-2'>libreoffice-5-1-2</option>
<option value='libreoffice-5-1-3'>libreoffice-5-1-3</option>
<option value='libreoffice-5-1-4'>libreoffice-5-1-4</option>
<option value='libreoffice-5-1-5'>libreoffice-5-1-5</option>
<option value='libreoffice-5-1-6'>libreoffice-5-1-6</option>
<option value='libreoffice-5-2'>libreoffice-5-2</option>
<option value='libreoffice-5-2-0'>libreoffice-5-2-0</option>
<option value='libreoffice-5-2-1'>libreoffice-5-2-1</option>
<option value='libreoffice-5-2-2'>libreoffice-5-2-2</option>
<option value='libreoffice-5-2-3'>libreoffice-5-2-3</option>
<option value='libreoffice-5-2-4'>libreoffice-5-2-4</option>
<option value='libreoffice-5-2-5'>libreoffice-5-2-5</option>
<option value='libreoffice-5-2-6'>libreoffice-5-2-6</option>
<option value='libreoffice-5-2-7'>libreoffice-5-2-7</option>
<option value='libreoffice-5-3'>libreoffice-5-3</option>
<option value='libreoffice-5-3-0'>libreoffice-5-3-0</option>
<option value='libreoffice-5-3-1'>libreoffice-5-3-1</option>
<option value='libreoffice-5-3-2'>libreoffice-5-3-2</option>
<option value='libreoffice-5-3-3'>libreoffice-5-3-3</option>
<option value='libreoffice-5-3-4'>libreoffice-5-3-4</option>
<option value='libreoffice-5-3-5'>libreoffice-5-3-5</option>
<option value='libreoffice-5-3-6'>libreoffice-5-3-6</option>
<option value='libreoffice-5-3-7'>libreoffice-5-3-7</option>
<option value='libreoffice-5-4'>libreoffice-5-4</option>
<option value='libreoffice-5-4-0'>libreoffice-5-4-0</option>
<option value='libreoffice-5-4-1'>libreoffice-5-4-1</option>
<option value='libreoffice-5-4-2'>libreoffice-5-4-2</option>
<option value='libreoffice-5-4-3'>libreoffice-5-4-3</option>
<option value='libreoffice-5-4-4'>libreoffice-5-4-4</option>
<option value='libreoffice-5-4-5'>libreoffice-5-4-5</option>
<option value='libreoffice-5-4-6'>libreoffice-5-4-6</option>
<option value='libreoffice-5-4-7'>libreoffice-5-4-7</option>
<option value='libreoffice-6-0'>libreoffice-6-0</option>
<option value='libreoffice-6-0-0'>libreoffice-6-0-0</option>
<option value='libreoffice-6-0-1'>libreoffice-6-0-1</option>
<option value='libreoffice-6-0-2'>libreoffice-6-0-2</option>
<option value='libreoffice-6-0-3'>libreoffice-6-0-3</option>
<option value='libreoffice-6-0-4'>libreoffice-6-0-4</option>
<option value='libreoffice-6-0-5'>libreoffice-6-0-5</option>
<option value='libreoffice-6-0-6'>libreoffice-6-0-6</option>
<option value='libreoffice-6-0-7'>libreoffice-6-0-7</option>
<option value='libreoffice-6-1'>libreoffice-6-1</option>
<option value='libreoffice-6-1-0'>libreoffice-6-1-0</option>
<option value='libreoffice-6-1-1'>libreoffice-6-1-1</option>
<option value='libreoffice-6-1-2'>libreoffice-6-1-2</option>
<option value='libreoffice-6-1-3'>libreoffice-6-1-3</option>
<option value='libreoffice-6-1-4'>libreoffice-6-1-4</option>
<option value='libreoffice-6-1-5'>libreoffice-6-1-5</option>
<option value='libreoffice-6-1-6'>libreoffice-6-1-6</option>
<option value='libreoffice-6-2'>libreoffice-6-2</option>
<option value='libreoffice-6-2-0'>libreoffice-6-2-0</option>
<option value='libreoffice-6-2-1'>libreoffice-6-2-1</option>
<option value='libreoffice-6-2-2'>libreoffice-6-2-2</option>
<option value='libreoffice-6-2-3'>libreoffice-6-2-3</option>
<option value='libreoffice-6-2-4'>libreoffice-6-2-4</option>
<option value='libreoffice-6-2-5'>libreoffice-6-2-5</option>
<option value='libreoffice-6-2-6'>libreoffice-6-2-6</option>
<option value='libreoffice-6-2-7'>libreoffice-6-2-7</option>
<option value='libreoffice-6-2-8'>libreoffice-6-2-8</option>
<option value='libreoffice-6-3'>libreoffice-6-3</option>
<option value='libreoffice-6-3-0'>libreoffice-6-3-0</option>
<option value='libreoffice-6-3-1'>libreoffice-6-3-1</option>
<option value='libreoffice-6-3-2'>libreoffice-6-3-2</option>
<option value='libreoffice-6-3-3'>libreoffice-6-3-3</option>
<option value='libreoffice-6-3-4'>libreoffice-6-3-4</option>
<option value='libreoffice-6-3-5'>libreoffice-6-3-5</option>
<option value='libreoffice-6-3-6'>libreoffice-6-3-6</option>
<option value='libreoffice-6-4'>libreoffice-6-4</option>
<option value='libreoffice-6-4-0'>libreoffice-6-4-0</option>
<option value='libreoffice-6-4-1'>libreoffice-6-4-1</option>
<option value='libreoffice-6-4-2'>libreoffice-6-4-2</option>
<option value='libreoffice-6-4-3'>libreoffice-6-4-3</option>
<option value='libreoffice-6-4-4'>libreoffice-6-4-4</option>
<option value='libreoffice-6-4-5'>libreoffice-6-4-5</option>
<option value='libreoffice-6-4-6'>libreoffice-6-4-6</option>
<option value='libreoffice-6-4-7'>libreoffice-6-4-7</option>
<option value='libreoffice-7-0'>libreoffice-7-0</option>
<option value='libreoffice-7-0-0'>libreoffice-7-0-0</option>
<option value='libreoffice-7-0-1'>libreoffice-7-0-1</option>
<option value='libreoffice-7-0-2'>libreoffice-7-0-2</option>
<option value='libreoffice-7-0-3'>libreoffice-7-0-3</option>
<option value='libreoffice-7-0-4'>libreoffice-7-0-4</option>
<option value='libreoffice-7-0-5'>libreoffice-7-0-5</option>
<option value='libreoffice-7-0-6'>libreoffice-7-0-6</option>
<option value='libreoffice-7-1'>libreoffice-7-1</option>
<option value='libreoffice-7-1-0'>libreoffice-7-1-0</option>
<option value='libreoffice-7-1-1'>libreoffice-7-1-1</option>
<option value='libreoffice-7-1-2'>libreoffice-7-1-2</option>
<option value='libreoffice-7-1-3'>libreoffice-7-1-3</option>
<option value='libreoffice-7-1-4'>libreoffice-7-1-4</option>
<option value='libreoffice-7-1-5'>libreoffice-7-1-5</option>
<option value='libreoffice-7-1-6'>libreoffice-7-1-6</option>
<option value='libreoffice-7-1-7'>libreoffice-7-1-7</option>
<option value='libreoffice-7-2'>libreoffice-7-2</option>
<option value='libreoffice-7-2-0'>libreoffice-7-2-0</option>
<option value='libreoffice-7-2-1'>libreoffice-7-2-1</option>
<option value='libreoffice-7-2-2'>libreoffice-7-2-2</option>
<option value='libreoffice-7-2-3'>libreoffice-7-2-3</option>
<option value='libreoffice-7-2-5'>libreoffice-7-2-5</option>
<option value='libreoffice-7-2-6'>libreoffice-7-2-6</option>
<option value='libreoffice-7-2-7'>libreoffice-7-2-7</option>
<option value='libreoffice-7-3'>libreoffice-7-3</option>
<option value='libreoffice-7-3-0'>libreoffice-7-3-0</option>
<option value='libreoffice-7-3-1'>libreoffice-7-3-1</option>
<option value='libreoffice-7-3-2'>libreoffice-7-3-2</option>
<option value='libreoffice-7-3-3'>libreoffice-7-3-3</option>
<option value='libreoffice-7-3-4'>libreoffice-7-3-4</option>
<option value='libreoffice-7-3-5'>libreoffice-7-3-5</option>
<option value='libreoffice-7-3-6'>libreoffice-7-3-6</option>
<option value='libreoffice-7-3-7'>libreoffice-7-3-7</option>
<option value='libreoffice-7-4'>libreoffice-7-4</option>
<option value='libreoffice-7-4-0'>libreoffice-7-4-0</option>
<option value='libreoffice-7-4-1'>libreoffice-7-4-1</option>
<option value='libreoffice-7-4-2'>libreoffice-7-4-2</option>
<option value='libreoffice-7-4-3'>libreoffice-7-4-3</option>
<option value='libreoffice-7-4-4'>libreoffice-7-4-4</option>
<option value='libreoffice-7-4-6'>libreoffice-7-4-6</option>
<option value='libreoffice-7-4-7'>libreoffice-7-4-7</option>
<option value='libreoffice-7-5'>libreoffice-7-5</option>
<option value='libreoffice-7-5-0'>libreoffice-7-5-0</option>
<option value='libreoffice-7-5-1'>libreoffice-7-5-1</option>
<option value='libreoffice-7-5-2'>libreoffice-7-5-2</option>
<option value='libreoffice-7-5-3'>libreoffice-7-5-3</option>
<option value='libreoffice-7-5-4'>libreoffice-7-5-4</option>
<option value='libreoffice-7-5-5'>libreoffice-7-5-5</option>
<option value='libreoffice-7-5-6'>libreoffice-7-5-6</option>
<option value='libreoffice-7-5-7'>libreoffice-7-5-7</option>
<option value='libreoffice-7-5-8'>libreoffice-7-5-8</option>
<option value='libreoffice-7-5-9'>libreoffice-7-5-9</option>
<option value='libreoffice-7-6'>libreoffice-7-6</option>
<option value='libreoffice-7-6-0'>libreoffice-7-6-0</option>
<option value='libreoffice-7-6-1'>libreoffice-7-6-1</option>
<option value='libreoffice-7-6-2'>libreoffice-7-6-2</option>
<option value='libreoffice-7-6-3'>libreoffice-7-6-3</option>
<option value='libreoffice-7-6-4'>libreoffice-7-6-4</option>
<option value='libreoffice-7-6-5'>libreoffice-7-6-5</option>
<option value='libreoffice-7-6-6'>libreoffice-7-6-6</option>
<option value='libreoffice-7-6-7'>libreoffice-7-6-7</option>
<option value='master'>master</option>
<option value='ports/macosx10.5/master'>ports/macosx10.5/master</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded'>private/Ashod/cd-5.3-3.2_import_unloaded</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink'>private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink</option>
<option value='private/Ashod/cd-5.3.3.2'>private/Ashod/cd-5.3.3.2</option>
<option value='private/Ashod/cp-5.0-preinit'>private/Ashod/cp-5.0-preinit</option>
<option value='private/Ashod/fast-calc-rendering'>private/Ashod/fast-calc-rendering</option>
<option value='private/Ashod/pdfium'>private/Ashod/pdfium</option>
<option value='private/Ashod/pdfium_on_master'>private/Ashod/pdfium_on_master</option>
<option value='private/Ashod/pdfium_on_master_fixed'>private/Ashod/pdfium_on_master_fixed</option>
<option value='private/EL-SHREIF/ui_logger'>private/EL-SHREIF/ui_logger</option>
<option value='private/Rosemary/change-tracking'>private/Rosemary/change-tracking</option>
<option value='private/Sweetshark/killswclient'>private/Sweetshark/killswclient</option>
<option value='private/Sweetshark/lessdepend'>private/Sweetshark/lessdepend</option>
<option value='private/Sweetshark/multilistenerfix'>private/Sweetshark/multilistenerfix</option>
<option value='private/ajrhunt/c4'>private/ajrhunt/c4</option>
<option value='private/ajrhunt/cunit'>private/ajrhunt/cunit</option>
<option value='private/ajrhunt/cunitdemo'>private/ajrhunt/cunitdemo</option>
<option value='private/ajrhunt/firebird-improvement'>private/ajrhunt/firebird-improvement</option>
<option value='private/bansan/chardraw'>private/bansan/chardraw</option>
<option value='private/bubli/textboxchaining'>private/bubli/textboxchaining</option>
<option value='private/hcvcastro/preinit'>private/hcvcastro/preinit</option>
<option value='private/hcvcastro/undo-row-comment'>private/hcvcastro/undo-row-comment</option>
<option value='private/jmux/armin-strip-before-squash'>private/jmux/armin-strip-before-squash</option>
<option value='private/jmux/broken-static-win'>private/jmux/broken-static-win</option>
<option value='private/jmux/current-reorga'>private/jmux/current-reorga</option>
<option value='private/jmux/meson'>private/jmux/meson</option>
<option value='private/jmux/meson-gsoc-2021'>private/jmux/meson-gsoc-2021</option>
<option value='private/jmux/oss-fuzz'>private/jmux/oss-fuzz</option>
<option value='private/jmux/oss-fuzz-wip'>private/jmux/oss-fuzz-wip</option>
<option value='private/jmux/scheduler-fixes'>private/jmux/scheduler-fixes</option>
<option value='private/jmux/shape.odt'>private/jmux/shape.odt</option>
<option value='private/jmux/wasm-for-master'>private/jmux/wasm-for-master</option>
<option value='private/jmux/wasm-tmp'>private/jmux/wasm-tmp</option>
<option value='private/jmux/wasm_for_master_catchall'>private/jmux/wasm_for_master_catchall</option>
<option value='private/jmux/win-arm64'>private/jmux/win-arm64</option>
<option value='private/jmux/win-test-nohang'>private/jmux/win-test-nohang</option>
<option value='private/juergen/Tests'>private/juergen/Tests</option>
<option value='private/kendy/condformat-api'>private/kendy/condformat-api</option>
<option value='private/kendy/condformat-fdo82014'>private/kendy/condformat-fdo82014</option>
<option value='private/kendy/mailmerge-04'>private/kendy/mailmerge-04</option>
<option value='private/kendy/mailmerge-05'>private/kendy/mailmerge-05</option>
<option value='private/kendy/swinterpreter'>private/kendy/swinterpreter</option>
<option value='private/kendy/testcl'>private/kendy/testcl</option>
<option value='private/khaledhosny/color-fonts'>private/khaledhosny/color-fonts</option>
<option value='private/khaledhosny/vcl-cleanup-font'>private/khaledhosny/vcl-cleanup-font</option>
<option value='private/kohei/chart-bugs'>private/kohei/chart-bugs</option>
<option value='private/kohei/find-replace-all-perf'>private/kohei/find-replace-all-perf</option>
<option value='private/kohei/headless-perf'>private/kohei/headless-perf</option>
<option value='private/kohei/if-or-not-if-jump'>private/kohei/if-or-not-if-jump</option>
<option value='private/kohei/sort-ref-update'>private/kohei/sort-ref-update</option>
<option value='private/lfrb/opengl-vcl'>private/lfrb/opengl-vcl</option>
<option value='private/lgodard/calc_notes_import_export'>private/lgodard/calc_notes_import_export</option>
<option value='private/lgodard/tdf#117202'>private/lgodard/tdf#117202</option>
<option value='private/llunak/mailmerge'>private/llunak/mailmerge</option>
<option value='private/llunak/mailmerge_01'>private/llunak/mailmerge_01</option>
<option value='private/llunak/mailmerge_02'>private/llunak/mailmerge_02</option>
<option value='private/llunak/mailmerge_03'>private/llunak/mailmerge_03</option>
<option value='private/llunak/munich_12587'>private/llunak/munich_12587</option>
<option value='private/llunak/skia'>private/llunak/skia</option>
<option value='private/lmamane/basetest'>private/lmamane/basetest</option>
<option value='private/lmamane/for-julien2412'>private/lmamane/for-julien2412</option>
<option value='private/lmamane/for-julien2412-master'>private/lmamane/for-julien2412-master</option>
<option value='private/lmamane/tdf110997'>private/lmamane/tdf110997</option>
<option value='private/lmamane/timedate-controls-nanosecond'>private/lmamane/timedate-controls-nanosecond</option>
<option value='private/lmamane/validation'>private/lmamane/validation</option>
<option value='private/mcecchetti/23H1/a11y/paragraph'>private/mcecchetti/23H1/a11y/paragraph</option>
<option value='private/mcecchetti/accessibility/paragraph'>private/mcecchetti/accessibility/paragraph</option>
<option value='private/mcecchetti/amd/pdf-export-jpeg'>private/mcecchetti/amd/pdf-export-jpeg</option>
<option value='private/mcecchetti/bitmapcrc64'>private/mcecchetti/bitmapcrc64</option>
<option value='private/mcecchetti/bitmapcrc64-5-0'>private/mcecchetti/bitmapcrc64-5-0</option>
<option value='private/mcecchetti/calc-perf-unit-test'>private/mcecchetti/calc-perf-unit-test</option>
<option value='private/mcecchetti/calc-unit-test'>private/mcecchetti/calc-unit-test</option>
<option value='private/mcecchetti/gl-program-binary'>private/mcecchetti/gl-program-binary</option>
<option value='private/mert/wip_deepl'>private/mert/wip_deepl</option>
<option value='private/mikekaganski/multicolumn'>private/mikekaganski/multicolumn</option>
<option value='private/mmeeks/aafixes44'>private/mmeeks/aafixes44</option>
<option value='private/mmeeks/backports'>private/mmeeks/backports</option>
<option value='private/mmeeks/binarydatacache'>private/mmeeks/binarydatacache</option>
<option value='private/mmeeks/bitmapcrc64'>private/mmeeks/bitmapcrc64</option>
<option value='private/mmeeks/copy-paste'>private/mmeeks/copy-paste</option>
<option value='private/mmeeks/copypaste'>private/mmeeks/copypaste</option>
<option value='private/mmeeks/cp-6.2-bits'>private/mmeeks/cp-6.2-bits</option>
<option value='private/mmeeks/cp64merge'>private/mmeeks/cp64merge</option>
<option value='private/mmeeks/currency-dropdown'>private/mmeeks/currency-dropdown</option>
<option value='private/mmeeks/foo'>private/mmeeks/foo</option>
<option value='private/mmeeks/formula-iterator'>private/mmeeks/formula-iterator</option>
<option value='private/mmeeks/gldebug'>private/mmeeks/gldebug</option>
<option value='private/mmeeks/hidpi-bits'>private/mmeeks/hidpi-bits</option>
<option value='private/mmeeks/icontest'>private/mmeeks/icontest</option>
<option value='private/mmeeks/opengl-backbuffer'>private/mmeeks/opengl-backbuffer</option>
<option value='private/mmeeks/opengl-backbuffer2'>private/mmeeks/opengl-backbuffer2</option>
<option value='private/mmeeks/sandbox'>private/mmeeks/sandbox</option>
<option value='private/mmeeks/swapdatacontainer'>private/mmeeks/swapdatacontainer</option>
<option value='private/mmeeks/vcl-opengl3'>private/mmeeks/vcl-opengl3</option>
<option value='private/moggi/fix-opengl-context-problems'>private/moggi/fix-opengl-context-problems</option>
<option value='private/moggi/improved-dxf-xls-export'>private/moggi/improved-dxf-xls-export</option>
<option value='private/moggi/opengl-4-4-build-test'>private/moggi/opengl-4-4-build-test</option>
<option value='private/moggi/opengl-preparation'>private/moggi/opengl-preparation</option>
<option value='private/moggi/opengl-vcl-win'>private/moggi/opengl-vcl-win</option>
<option value='private/moggi/orcus-improvements'>private/moggi/orcus-improvements</option>
<option value='private/moggi/track-win-dc'>private/moggi/track-win-dc</option>
<option value='private/moggi/ui-test'>private/moggi/ui-test</option>
<option value='private/moggi/vcl-opengl3'>private/moggi/vcl-opengl3</option>
<option value='private/mst/sw_fieldmarkhide'>private/mst/sw_fieldmarkhide</option>
<option value='private/mst/sw_redlinehide'>private/mst/sw_redlinehide</option>
<option value='private/mst/sw_redlinehide_2'>private/mst/sw_redlinehide_2</option>
<option value='private/mst/sw_redlinehide_3'>private/mst/sw_redlinehide_3</option>
<option value='private/mst/sw_redlinehide_4a'>private/mst/sw_redlinehide_4a</option>
<option value='private/mst/sw_redlinehide_4b'>private/mst/sw_redlinehide_4b</option>
<option value='private/pranavk/modernize_gtktiledviewer'>private/pranavk/modernize_gtktiledviewer</option>
<option value='private/quwex/gsoc-box2d-experimental'>private/quwex/gsoc-box2d-experimental</option>
<option value='private/quwex/notespane-search'>private/quwex/notespane-search</option>
<option value='private/quwex/notespaneflat'>private/quwex/notespaneflat</option>
<option value='private/quwex/notespanesquashed'>private/quwex/notespanesquashed</option>
<option value='private/quwex/tdf59323'>private/quwex/tdf59323</option>
<option value='private/s.mehrbrodt/colorpicker-backport'>private/s.mehrbrodt/colorpicker-backport</option>
<option value='private/sweetshark/swdepend'>private/sweetshark/swdepend</option>
<option value='private/tbsdy/clipping'>private/tbsdy/clipping</option>
<option value='private/tbsdy/drawserverfontlayout'>private/tbsdy/drawserverfontlayout</option>
<option value='private/tbsdy/emf'>private/tbsdy/emf</option>
<option value='private/tbsdy/osl_getAllEnvironment'>private/tbsdy/osl_getAllEnvironment</option>
<option value='private/tbsdy/outdev'>private/tbsdy/outdev</option>
<option value='private/tbsdy/printinfomgr'>private/tbsdy/printinfomgr</option>
<option value='private/tbsdy/workbench'>private/tbsdy/workbench</option>
<option value='private/thb/libo-6-1+backports'>private/thb/libo-6-1+backports</option>
<option value='private/thb/libreoffice-5-2+backports'>private/thb/libreoffice-5-2+backports</option>
<option value='private/thb/sw_redlinehide-6-1'>private/thb/sw_redlinehide-6-1</option>
<option value='private/thb/tdf149754'>private/thb/tdf149754</option>
<option value='private/thb/wasm-upstreaming'>private/thb/wasm-upstreaming</option>
<option value='private/timar/cp-6.2-centos7'>private/timar/cp-6.2-centos7</option>
<option value='private/timar/fontconfigcrash'>private/timar/fontconfigcrash</option>
<option value='private/timar/pythonupgrademsp'>private/timar/pythonupgrademsp</option>
<option value='private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe'>private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe</option>
<option value='private/tml/android-use-bionic-linker-copy'>private/tml/android-use-bionic-linker-copy</option>
<option value='private/tml/android-use-faulty.lib'>private/tml/android-use-faulty.lib</option>
<option value='private/tml/cp-6-4-28-1'>private/tml/cp-6-4-28-1</option>
<option value='private/tml/fixwintext'>private/tml/fixwintext</option>
<option value='private/tml/iculess'>private/tml/iculess</option>
<option value='private/tml/lov-6.1.5.2'>private/tml/lov-6.1.5.2</option>
<option value='private/tml/lov-6.2.1'>private/tml/lov-6.2.1</option>
<option value='private/tml/lov-7.0.3.3'>private/tml/lov-7.0.3.3</option>
<option value='private/tml/lov-7.0.4'>private/tml/lov-7.0.4</option>
<option value='private/tml/lov-7.1.2'>private/tml/lov-7.1.2</option>
<option value='private/tml/opencl-default-1'>private/tml/opencl-default-1</option>
<option value='private/tvajngerl/staging'>private/tvajngerl/staging</option>
<option value='ref/for/distro/collabora/cp-6.2'>ref/for/distro/collabora/cp-6.2</option>
</select> <input type='submit' value='switch'/></form></td></tr>
<tr><td class='sub'>LibreOffice 核心代码仓库</td><td class='sub right'>文档基金会</td></tr></table>
<table class='tabs'><tr><td>
<a href='/cgit/lo/core/?h=cp-6.0-29-20201221'>summary</a><a href='/cgit/lo/core/refs/?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3'>refs</a><a class='active' href='/cgit/lo/core/log/configmgr?h=cp-6.0-29-20201221&amp;showmsg=1'>log</a><a href='/cgit/lo/core/tree/configmgr?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3'>tree</a><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3'>commit</a><a href='/cgit/lo/core/diff/configmgr?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3'>diff</a></td><td class='form'><form class='right' method='get' action='/cgit/lo/core/log/configmgr'>
<input type='hidden' name='h' value='cp-6.0-29-20201221'/><input type='hidden' name='id' value='85380260003dd481b97436adb14daf08ffd897c3'/><input type='hidden' name='showmsg' value='1'/><select name='qt'>
<option value='grep'>log msg</option>
<option value='author'>author</option>
<option value='committer'>committer</option>
<option value='range'>range</option>
</select>
<input class='txt' type='search' size='10' name='q' value=''/>
<input type='submit' value='search'/>
</form>
</td></tr></table>
<div class='path'>path: <a href='/cgit/lo/core/log/?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3&amp;showmsg=1'>root</a>/<a href='/cgit/lo/core/log/configmgr?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3&amp;showmsg=1'>configmgr</a></div><div class='content'><table class='list nowrap'><tr class='nohover'><th class='left'>Age</th><th class='left'>Commit message (<a href='/cgit/lo/core/log/configmgr?h=cp-6.0-29-20201221&amp;id=85380260003dd481b97436adb14daf08ffd897c3'>Collapse</a>)</th><th class='left'>Author</th></tr>
<tr class='logheader'><td><span title='2015-04-22 09:57:47 +0200'>2015-04-22</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=6ff2d84ade299cb3d14d4110e4cf1a4b8070c030'>Various #include &lt;sal/log.hxx&gt; fixups</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
rtl/string.hxx and rtl/ustring.hxx both unnecessarily #include &lt;sal/log.hxx&gt;
(and don't make use of it themselves), but many other files happen to depend on
it.  Cleaned up some, but something like

  grep -FwL sal/log.hxx $(git grep -Elw \
    'SAL_INFO|SAL_INFO_IF|SAL_WARN|SAL_WARN_IF') -- \*.cxx)

shows lots more files that potentially need fixing before the include can be
removed from rtl/string.hxx and rtl/ustring.hxx.

Change-Id: Ibf033363e83d37851776f392dc0b077381cd8b90


</td></tr>
<tr class='logheader'><td><span title='2015-04-02 09:38:29 +0200'>2015-04-02</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=1a18cafecb06a76e872f5f1a9434160ea8ffd881'>loplugin:staticmethods</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I3ae555fd9f0dc3c11ea301ee1cb2c799fbec820d


</td></tr>
<tr class='logheader'><td><span title='2015-04-01 14:26:26 +0200'>2015-04-01</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=7bcf64c29a0f5d3d2d60fe98afadab6e48dbe8b3'>Add isReadOnly() support to simplified configuration access</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
[API CHANGE]: extends the css.configuration.XReadWriteAccess in an incompatible
way, but that is unpublished, has been commented as "still unpublished and
unstable," and was specifically introduced for internal use by the simplified
configuration access, so should not affect 3rd party code.

Change-Id: I99ce045f5bd8c598e689d46fb0d3626dfaa6d0a0


</td></tr>
<tr class='logheader'><td><span title='2015-04-01 12:48:44 +0200'>2015-04-01</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=2fc4a8c8113b1bf78258845ed06662a07996a6af'>Add support for cppu::UnoType&lt;void&gt;</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I88259ffaffc73979c240721d2db166c79d3085f1


</td></tr>
<tr class='logheader'><td><span title='2015-03-11 09:58:36 +0000'>2015-03-11</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=556373c41fddbac6cbee1c89e7707631270a1852'>V668 no sense in testing the result of new against null</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I4a33bd92fc8448638a4bfe1eab7e5041a4c5cc39


</td></tr>
<tr class='logheader'><td><span title='2015-02-16 13:36:00 +0000'>2015-02-16</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=b5603894734af2a8d26b69828991cb201b063442'>incomplete type error under some compilers</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I87740d4d035bc4e430d566f4672bfd338511d3a8


</td></tr>
<tr class='logheader'><td><span title='2015-02-16 13:15:31 +0000'>2015-02-16</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=bd08ebde36e5bce2d56d1c50b7fd251a2e8035e4'>restore dependencies</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I20645122bc80d729093dff8d1a8094c6fbf7d68a


</td></tr>
<tr class='logheader'><td><span title='2015-02-16 12:54:45 +0000'>2015-02-16</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=01a8bda416d1598f5486f95b6a57d61ff09873ed'>boost::noncopyable-&gt;'= delete'</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: If0f898a1e912fcd2095d8ba88b2b8046596e16ea


</td></tr>
<tr class='logheader'><td><span title='2015-02-16 12:54:44 +0000'>2015-02-16</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=a1ceacc17e3f30d5e9c06b3218ad8ec26ca2f1b9'>boost::foo_ptr-&gt;std::foo_ptr</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I9219619b538b6530a89f5932ac51eb3b62eb396a


</td></tr>
<tr class='logheader'><td><span title='2015-02-12 11:27:57 +0000'>2015-02-12</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=c1e25f9a173f98c82ce196b09022a8abdfbe9e53'>coverity#1269597 Uncaught exception</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
and

coverity#1269596 Uncaught exception

Change-Id: I0466e66cd33dd842296131f73376bc95308254e4


</td></tr>
<tr class='logheader'><td><span title='2015-02-11 10:00:32 +0100'>2015-02-11</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=dab503c530c00bf80df590234534082dcaa61043'>loplugin:unreffun</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I6cfa63043460a5776873087c62cfbb2753c88f83


</td></tr>
<tr class='logheader'><td><span title='2015-02-11 10:00:32 +0100'>2015-02-11</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=d49bc78f22d7f7403f1f885f15b1d3dd2840cf0d'>tdf#46723 - enable configmgr unit tests</a><span class='decoration'></span></td><td>Radu Ioan</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Known limitation:
Disabled testThreads because it fails on writerThreads
libreoffice/configmgr/qa/unit/test.cxx:500:(anonymous namespace)::Test::testThreads
assertion failed
- Expression: success

Some exception is catched for some writerThread

Change-Id: I5b891bec25599c4536827ffa7ea514b1cdf08b46
Signed-off-by: Stephan Bergmann &lt;sbergman@redhat.com&gt;


</td></tr>
<tr class='logheader'><td><span title='2015-02-10 21:46:39 +0000'>2015-02-10</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=61b8596f1114d7b9b6ebcaedf125eeb8821d2c9f'>cppcheck: assertWithSideEffect</a></td><td>Caolán McNamara</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I6601e857394d7b460a105e851529350a62d1a2a6


</td></tr>
<tr class='logheader'><td><span title='2015-02-06 23:06:58 +0100'>2015-02-06</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=4f7a1f5b9499d5fbeff413a4914283c2bfe7c2d9'>fdo#75757: Remove inheritance from std::vector</a><span class='decoration'></span></td><td>Matthew Pottage</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Deprecated comphelper/sequenceasvector.hxx.

Rewritten code using it. Using instead the functions containerToSequence and
sequenceToContainer, found in include/comphelper/sequence.hxx.

One class that inherits from it (in framework/inc/stdtypes.h), and
the code using that has been left.

Signed-off-by: Michael Stahl &lt;mstahl@redhat.com&gt;

Conflicts:
	writerfilter/source/dmapper/DomainMapper.cxx
	writerfilter/source/dmapper/TblStylePrHandler.hxx
	writerfilter/source/dmapper/WrapPolygonHandler.hxx

Change-Id: Ice61c94ffb052e389281aebb7cdf185134221061


</td></tr>
<tr class='logheader'><td><span title='2014-12-16 17:27:07 +0100'>2014-12-16</span></td><td class='logsubject'><a href='/cgit/lo/core/commit/configmgr?h=cp-6.0-29-20201221&amp;id=0e7804b8978e106d08d026fd959714a8094b2403'>configmgr: Use appropriate OUString functions on string constants</a></td><td>Stephan Bergmann</td></tr>
<tr class='nohover-highlight'><td/><td colspan='3' class='logmsg'>
Change-Id: I7345234957aab62e884c0e884ac0b3b8a21e9cc5


</td></tr>