/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "oox/vml/vmlshapecontext.hxx" #include "oox/core/xmlfilterbase.hxx" #include #include #include #include #include "oox/vml/vmldrawing.hxx" #include "oox/vml/vmlshape.hxx" #include "oox/vml/vmlshapecontainer.hxx" #include "oox/vml/vmltextboxcontext.hxx" #include namespace oox { namespace vml { using namespace ::com::sun::star; using ::oox::core::ContextHandler2; using ::oox::core::ContextHandler2Helper; using ::oox::core::ContextHandlerRef; namespace { /** Returns the boolean value from the specified VML attribute (if present). */ OptValue< bool > lclDecodeBool( const AttributeList& rAttribs, sal_Int32 nToken ) { OptValue< OUString > oValue = rAttribs.getString( nToken ); if( oValue.has() ) return OptValue< bool >( ConversionHelper::decodeBool( oValue.get() ) ); return OptValue< bool >(); } /** Returns the percentage value from the specified VML attribute (if present). The value will be normalized (1.0 is returned for 100%). */ OptValue< double > lclDecodePercent( const AttributeList& rAttribs, sal_Int32 nToken, double fDefValue ) { OptValue< OUString > oValue = rAttribs.getString( nToken ); if( oValue.has() ) return OptValue< double >( ConversionHelper::decodePercent( oValue.get(), fDefValue ) ); return OptValue< double >(); } /** #119750# Special method for opacity; it *should* be a percentage value, but there are cases where a value relative to 0xffff (65536) is used, ending with an 'f' */ OptValue< double > lclDecodeOpacity( const AttributeList& rAttribs, sal_Int32 nToken, double fDefValue ) { OptValue< OUString > oValue = rAttribs.getString( nToken ); double fRetval(fDefValue); if( oValue.has() ) { const OUString aString(oValue.get()); const sal_Int32 nLength(aString.getLength()); if(nLength > 0) { if(aString.endsWith("f")) { fRetval = std::max(0.0, std::min(1.0, aString.toDouble() / 65536.0)); } else { fRetval = ConversionHelper::decodePercent( aString, fDefValue ); } } } return OptValue< double >(fRetval); } /** Returns the integer value pair from the specified VML attribute (if present). */ OptValue< Int32Pair > lclDecodeInt32Pair( const AttributeList& rAttribs, sal_Int32 nToken ) { OptValue< OUString > oValue = rAttribs.getString( nToken ); OptValue< Int32Pair > oRetValue; if( oValue.has() ) { OUString aValue1, aValue2; ConversionHelper::separatePair( aValue1, aValue2, oValue.get(), ',' ); oRetValue = Int32Pair( aValue1.toInt32(), aValue2.toInt32() ); } return oRetValue; } /** Returns the percentage pair from the specified VML attribute (if present). */ OptValue< DoublePair > lclDecodePercentPair( const AttributeList& rAttribs, sal_Int32 nToken ) { OptValue< OUString > oValue = rAttribs.getString( nToken ); OptValue< DoublePair > oRetValue; if( oValue.has() ) { OUString aValue1, aValue2; ConversionHelper::separatePair( aValue1, aValue2, oValue.get(), ',' ); oRetValue = DoublePair( ConversionHelper::decodePercent( aValue1, 0.0 ), ConversionHelper::decodePercent( aValue2, 0.0 ) ); } return oRetValue; } /** Returns the boolean value from the passed string of an attribute in the x: namespace (VML for spreadsheets). Supported values: f, t, False, True. @param bDefaultForEmpty Default value for the empty string. */ bool lclDecodeVmlxBool( const OUString& rValue, bool bDefaultForEmpty ) { if( rValue.isEmpty() ) return bDefaultForEmpty; sal_Int32 nToken = AttributeConversion::decodeToken( rValue ); // anything else than 't' or 'True' is considered to be false, as specified return (nToken == XML_t) || (nToken == XML_True); } } // namespace ShapeLayoutContext::ShapeLayoutContext( ContextHandler2Helper& rParent, Drawing& rDrawing ) : ContextHandler2( rParent ), mrDrawing( rDrawing ) { } ContextHandlerRef ShapeLayoutContext::onCreateContext( sal_Int32 nElement, const AttributeList& rAttribs ) { switch( nElement ) { case O_TOKEN( idmap ): { OUString aBlockIds = rAttribs.getString( XML_data, OUString() ); sal_Int32 nIndex = 0; while( nIndex >= 0 ) { OUString aToken = aBlockIds.getToken( 0, ' ', nIndex ).trim(); if( !aToken.isEmpty() ) mrDrawing.registerBlockId( aToken.toInt32() ); } } break; } return nullptr; } ClientDataContext::ClientDataContext( ContextHandler2Helper& rParent, ClientData& rClientData, const AttributeList& rAttribs ) : ContextHandler2( rParent ), mrClientData( rClientData ) { mrClientData.mnObjType = rAttribs.getToken( XML_ObjectType, XML_TOKEN_INVALID ); } ContextHandlerRef ClientDataContext::onCreateContext( sal_Int32 /*nElement*/, const AttributeList& /*rAttribs*/ ) { if( isRootElement() ) { maElementText.clear(); return this; } return nullptr; } void ClientDataContext::onCharacters( const OUString& rChars ) { /* Empty but existing elements have special meaning, e.g. 'true'. Collect existing text and convert it in onEndElement(). */ maElementText = rChars; } void ClientDataContext::onEndElement() { switch( getCurrentElement() ) { case VMLX_TOKEN( Anchor ): mrClientData.maAnchor = maElementText; break; case VMLX_TOKEN( FmlaMacro ): mrClientData.maFmlaMacro = maElementText; break; case VMLX_TOKEN( FmlaPict ): mrClientData.maFmlaPict = maElementText; break; case VMLX_TOKEN( FmlaLink ): mrClientData.maFmlaLink = maElementText; break; case VMLX_TOKEN( FmlaRange ): mrClientData.maFmlaRange = maElementText; break; case VMLX_TOKEN( FmlaGroup ): mrClientData.maFmlaGroup = maElementText; break; case VMLX_TOKEN( TextHAlign ): mrClientData.mnTextHAlign = AttributeConversion::decodeToken( maElementText ); break; case VMLX_TOKEN( TextVAlign ): mrClientData.mnTextVAlign = AttributeConversion::decodeToken( maElementText ); break; case VMLX_TOKEN( Column ): mrClientData.mnCol = maElementText.toInt32(); break; case VMLX_TOKEN( Row ): mrClientData.mnRow = maElementText.toInt32(); break; case VMLX_TOKEN( Checked ): mrClientData.mnChecked = maElementText.toInt32(); break; case VMLX_TOKEN( DropStyle ): mrClientData.mnDropStyle = AttributeConversion::decodeToken( maElementText ); break; case VMLX_TOKEN( DropLines ): mrClientData.mnDropLines = maElementText.toInt32(); break; case VMLX_TOKEN( Val ): mrClientData.mnVal = maElementText.toInt32(); break; case VMLX_TOKEN( Min ): mrClientData.mnMin = maElementText.toInt32(); break; case VMLX_TOKEN( Max ): mrClientData.mnMax = maElementText.toInt32(); break; case VMLX_TOKEN( Inc ): mrClientData.mnInc = maElementText.toInt32(); break; case VMLX_TOKEN( Page ): mrClientData.mnPage = maElementText.toInt32(); break; case VMLX_TOKEN( SelType ): mrClientData.mnSelType = AttributeConversion::decodeToken( maElementText ); break; case VMLX_TOKEN( VTEdit ): mrClientData.mnVTEdit = maElementText.toInt32(); break; case VMLX_TOKEN( PrintObject ): mrClientData.mbPrintObject = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( Visible ): mrClientData.mbVisible = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( DDE ): mrClientData.mbDde = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( NoThreeD ): mrClientData.mbNo3D = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( NoThreeD2 ): mrClientData.mbNo3D2 = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( MultiLine ): mrClientData.mbMultiLine = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( VScroll ): mrClientData.mbVScroll = lclDecodeVmlxBool( maElementText, true ); break; case VMLX_TOKEN( SecretEdit ): mrClientData.mbSecretEdit = lclDecodeVmlxBool( maElementText, true ); break; } } ShapeContextBase::ShapeContextBase( ContextHandler2Helper& rParent ) : ContextHandler2( rParent ) { } ContextHandlerRef ShapeContextBase::createShapeContext( ContextHandler2Helper& rParent, ShapeContainer& rShapes, sal_Int32 nElement, const AttributeList& rAttribs ) { switch( nElement ) { case O_TOKEN( shapelayout ): return new ShapeLayoutContext( rParent, rShapes.getDrawing() ); case VML_TOKEN( shapetype ): return new ShapeTypeContext( rParent, rShapes.createShapeType(), rAttribs ); case VML_TOKEN( group ): return new GroupShapeContext( rParent, rShapes.createShape< GroupShape >(), rAttribs ); case VML_TOKEN( shape ): if (rAttribs.hasAttribute(XML_path)) return new ShapeContext( rParent, rShapes.createShape< BezierShape >(), rAttribs ); else return new ShapeContext( rParent, rShapes.createShape< ComplexShape >(), rAttribs ); case VML_TOKEN( rect ): return new RectangleShapeContext( rParent, rAttribs, rShapes.createShape< RectangleShape >() ); case VML_TOKEN( roundrect ): return new ShapeContext( rParent, rShapes.createShape< RectangleShape >(), rAttribs ); case VML_TOKEN( oval ): return new ShapeContext( rParent, rShapes.createShape< EllipseShape >(), rAttribs ); case VML_TOKEN( polyline ): return new ShapeContext( rParent, rShapes.createShape< PolyLineShape >(), rAttribs ); case VML_TOKEN( line ): return new ShapeContext( rParent, rShapes.createShape< LineShape >(), rAttribs ); case VML_TOKEN( curve ): return new ShapeContext( rParent, rShapes.createShape< BezierShape >(), rAttribs ); // TODO: case VML_TOKEN( arc ): case VML_TOKEN( diagram ): case VML_TOKEN( image ): return new ShapeContext( rParent, rShapes.createShape< ComplexShape >(), rAttribs ); } return nullptr; } ShapeTypeContext::ShapeTypeContext( ContextHandler2Helper& rParent, ShapeType& rShapeType, const AttributeList& rAttribs ) : ShapeContextBase( rParent ), mrTypeModel( rShapeType.getTypeModel() ) { // shape identifier and shape name bool bHasOspid = rAttribs.hasAttribute( O_TOKEN( spid ) ); mrTypeModel.maShapeId = rAttribs.getXString( bHasOspid ? O_TOKEN( spid ) : XML_id, OUString() ); mrTypeModel.maLegacyId = rAttribs.getString( XML_id, OUString() ); OSL_ENSURE( !mrTypeModel.maShapeId.isEmpty(), "ShapeTypeContext::ShapeTypeContext - missing shape identifier" ); // builtin shape type identifier mrTypeModel.moShapeType = rAttribs.getInteger( O_TOKEN( spt ) ); // if the o:spid attribute exists, the id attribute contains the user-defined shape name if( bHasOspid ) { mrTypeModel.maShapeName = rAttribs.getXString( XML_id, OUString() ); // get ShapeType and ShapeId from name for compatibility mrTypeModel.maShapeId = mrTypeModel.maShapeName; static const OUString sShapeTypePrefix = "shapetype_"; if( mrTypeModel.maShapeName.startsWith( sShapeTypePrefix ) ) mrTypeModel.moShapeType = mrTypeModel.maShapeName.copy(sShapeTypePrefix.getLength()).toInt32(); } // coordinate system position/size, CSS style mrTypeModel.moCoordPos = lclDecodeInt32Pair( rAttribs, XML_coordorigin ); mrTypeModel.moCoordSize = lclDecodeInt32Pair( rAttribs, XML_coordsize ); setStyle( rAttribs.getString( XML_style, OUString() ) ); if( lclDecodeBool( rAttribs, O_TOKEN( hr )).get( false )) { // MSO's handling of o:hr width is nowhere near what the spec says: // - o:hrpct is not in % but in 0.1% // - if o:hrpct is not given, 100% width is assumed // - given width is used only if explicit o:hrpct="0" is given OUString hrpct = rAttribs.getString( O_TOKEN( hrpct ), "1000" ); if( hrpct != "0" ) mrTypeModel.maWidth = OUString::number( hrpct.toInt32() / 10 ) + "%"; } // stroke settings (may be overridden by v:stroke element later) mrTypeModel.maStrokeModel.moStroked = lclDecodeBool( rAttribs, XML_stroked ); mrTypeModel.maStrokeModel.moColor = rAttribs.getString( XML_strokecolor ); mrTypeModel.maStrokeModel.moWeight = rAttribs.getString( XML_strokeweight ); // fill settings (may be overridden by v:fill element later) mrTypeModel.maFillModel.moFilled = lclDecodeBool( rAttribs, XML_filled ); mrTypeModel.maFillModel.moColor = rAttribs.getString( XML_fillcolor ); // For roundrect we may have a arcsize attribute to read mrTypeModel.maArcsize = rAttribs.getString(XML_arcsize, OUString()); // editas mrTypeModel.maEditAs = rAttribs.getString(XML_editas, OUString()); mrTypeModel.maAdjustments = rAttribs.getString(XML_adj, OUString()); } ContextHandlerRef ShapeTypeContext::onCreateContext( sal_Int32 nElement, const AttributeList& rAttribs ) { if( isRootElement() ) switch( nElement ) { case VML_TOKEN( stroke ): mrTypeModel.maStrokeModel.moStroked.assignIfUsed( lclDecodeBool( rAttribs, XML_on ) ); mrTypeModel.maStrokeModel.maStartArrow.moArrowType = rAttribs.getToken( XML_startarrow ); mrTypeModel.maStrokeModel.maStartArrow.moArrowWidth = rAttribs.getToken( XML_startarrowwidth ); mrTypeModel.maStrokeModel.maStartArrow.moArrowLength = rAttribs.getToken( XML_startarrowlength ); mrTypeModel.maStrokeModel.maEndArrow.moArrowType = rAttribs.getToken( XML_endarrow ); mrTypeModel.maStrokeModel.maEndArrow.moArrowWidth = rAttribs.getToken( XML_endarrowwidth ); mrTypeModel.maStrokeModel.maEndArrow.moArrowLength = rAttribs.getToken( XML_endarrowlength ); mrTypeModel.maStrokeModel.moColor.assignIfUsed( rAttribs.getString( XML_color ) ); mrTypeModel.maStrokeModel.moOpacity = lclDecodeOpacity( rAttribs, XML_opacity, 1.0 ); mrTypeModel.maStrokeModel.moWeight.assignIfUsed( rAttribs.getString( XML_weight ) ); mrTypeModel.maStrokeModel.moDashStyle = rAttribs.getString( XML_dashstyle ); mrTypeModel.maStrokeModel.moLineStyle = rAttribs.getToken( XML_linestyle ); mrTypeModel.maStrokeModel.moEndCap = rAttribs.getToken( XML_endcap ); mrTypeModel.maStrokeModel.moJoinStyle = rAttribs.getToken( XML_joinstyle ); break; case VML_TOKEN( fill ): mrTypeModel.maFillModel.moFilled.assignIfUsed( lclDecodeBool( rAttribs, XML_on ) ); mrTypeModel.maFillModel.moColor.assignIfUsed( rAttribs.getString( XML_color ) ); mrTypeModel.maFillModel.moOpacity = lclDecodeOpacity( rAttribs, XML_opacity, 1.0 ); mrTypeModel.maFillModel.moColor2 = rAttribs.getString( XML_color2 ); mrTypeModel.maFillModel.moOpacity2 = lclDecodeOpacity( rAttribs, XML_opacity2, 1.0 ); mrTypeModel.maFillModel.moType = rAttribs.getToken( XML_type ); mrTypeModel.maFillModel.moAngle = rAttribs.getInteger( XML_angle ); mrTypeModel.maFillModel.moFocus = lclDecodePercent( rAttribs, XML_focus, 0.0 ); mrTypeModel.maFillModel.moFocusPos = lclDecodePercentPair( rAttribs, XML_focusposition ); mrTypeModel.maFillModel.moFocusSize = lclDecodePercentPair( rAttribs, XML_focussize ); mrTypeModel.maFillModel.moBitmapPath = decodeFragmentPath( rAttribs, O_TOKEN( relid ) ); mrTypeModel.maFillModel.moRotate = lclDecodeBool( rAttribs, XML_rotate ); break; case VML_TOKEN( imagedata ): { // shapes in docx use r:id for the relationship id // in xlsx it they use o:relid bool bHasORelId = rAttribs.hasAttribute( O_TOKEN( relid ) ); mrTypeModel.moGraphicPath = decodeFragmentPath( rAttribs, bHasORelId ? O_TOKEN( relid ) : R_TOKEN( id ) ); mrTypeModel.moGraphicTitle = rAttribs.getString( O_TOKEN( title ) ); // Get crop attributes. mrTypeModel.moCropBottom = rAttribs.getString(XML_cropbottom); mrTypeModel.moCropLeft = rAttribs.getString(XML_cropleft); mrTypeModel.moCropRight = rAttribs.getString(XML_cropright); mrTypeModel.moCropTop = rAttribs.getString(XML_croptop); } break; case NMSP_vmlWord | XML_wrap: mrTypeModel.moWrapAnchorX = rAttribs.getString(XML_anchorx); mrTypeModel.moWrapAnchorY = rAttribs.getString(XML_anchory); mrTypeModel.moWrapType = rAttribs.getString(XML_type); mrTypeModel.moWrapSide = rAttribs.getString(XML_side); break; case VML_TOKEN( shadow ): { mrTypeModel.maShadowModel.mbHasShadow = true; mrTypeModel.maShadowModel.moShadowOn.assignIfUsed(lclDecodeBool(rAttribs, XML_on)); mrTypeModel.maShadowModel.moColor.assignIfUsed(rAttribs.getString(XML_color)); mrTypeModel.maShadowModel.moOffset.assignIfUsed(rAttribs.getString(XML_offset)); mrTypeModel.maShadowModel.moOpacity = lclDecodePercent(rAttribs, XML_opacity, 1.0); } break; case VML_TOKEN( textpath ): mrTypeModel.maTextpathModel.moString.assignIfUsed(rAttribs.getString(XML_string)); mrTypeModel.maTextpathModel.moStyle.assignIfUsed(rAttribs.getString(XML_style)); break; } return nullptr; } OptValue< OUString > ShapeTypeContext::decodeFragmentPath( const AttributeList& rAttribs, sal_Int32 nToken ) const { OptValue< OUString > oFragmentPath; OptValue< OUString > oRelId = rAttribs.getString( nToken ); if( oRelId.has() ) oFragmentPath = getFragmentPathFromRelId( oRelId.get() ); return oFragmentPath; } void ShapeTypeContext::setStyle( const OUString& rStyle ) { sal_Int32 nIndex = 0; while( nIndex >= 0 ) { OUString aName, aValue; if( ConversionHelper::separatePair( aName, aValue, rStyle.getToken( 0, ';', nIndex ), ':' ) ) { if( aName == "position" ) mrTypeModel.maPosition = aValue; else if( aName == "z-index" ) mrTypeModel.maZIndex = aValue; else if( aName == "left" ) mrTypeModel.maLeft = aValue; else if( aName == "top" ) mrTypeModel.maTop = aValue; else if( aName == "width" ) mrTypeModel.maWidth = aValue; else if( aName == "height" ) mrTypeModel.maHeight = aValue; else if( aName == "margin-left" ) mrTypeModel.maMarginLeft = aValue; else if( aName == "margin-top" ) mrTypeModel.maMarginTop = aValue; else if( aName == "mso-position-vertical-relative" ) mrTypeModel.maPositionVerticalRelative = aValue; else if( aName == "mso-position-horizontal-relative" ) mrTypeModel.maPositionHorizontalRelative = aValue; else if( aName == "mso-position-horizontal" ) mrTypeModel.maPositionHorizontal = aValue; else if( aName == "mso-position-vertical" ) mrTypeModel.maPositionVertical = aValue; else if( aName == "mso-width-percent" ) mrTypeModel.maWidthPercent = aValue; else if( aName == "mso-width-relative" ) mrTypeModel.maWidthRelative = aValue; else if( aName == "mso-height-percent" ) mrTypeModel.maHeightPercent = aValue; else if( aName == "mso-height-relative" ) mrTypeModel.maHeightRelative = aValue; else if( aName == "mso-fit-shape-to-text" ) mrTypeModel.mbAutoHeight = true; else if( aName == "rotation" ) mrTypeModel.maRotation = aValue; else if( aName == "flip" ) mrTypeModel.maFlip = aValue; else if( aName == "visibility" ) mrTypeModel.mbVisible = aValue != "hidden"; else if( aName == "mso-wrap-style" ) mrTypeModel.maWrapStyle = aValue; else if ( aName == "v-text-anchor" ) mrTypeModel.maVTextAnchor = aValue; else if ( aName == "mso-wrap-distance-left" ) mrTypeModel.maWrapDistanceLeft = aValue; else if ( aName == "mso-wrap-distance-right" ) mrTypeModel.maWrapDistanceRight = aValue; else if ( aName == "mso-wrap-distance-top" ) mrTypeModel.maWrapDistanceTop = aValue; else if ( aName == "mso-wrap-distance-bottom" ) mrTypeModel.maWrapDistanceBottom = aValue; } } } ShapeContext::ShapeContext( ContextHandler2Helper& rParent, ShapeBase& rShape, const AttributeList& rAttribs ) : ShapeTypeContext( rParent, rShape, rAttribs ), mrShape( rShape ), mrShapeModel( rShape.getShapeModel() ) { // collect shape specific attributes mrShapeModel.maType = rAttribs.getXString( XML_type, OUString() ); // polyline path setPoints( rAttribs.getString( XML_points, OUString() ) ); // line start and end positions setFrom(rAttribs.getString(XML_from, OUString())); setTo(rAttribs.getString(XML_to, OUString())); setControl1(rAttribs.getString(XML_control1, OUString())); setControl2(rAttribs.getString(XML_control2, OUString())); setVmlPath(rAttribs.getString(XML_path, OUString())); } ContextHandlerRef ShapeContext::onCreateContext( sal_Int32 nElement, const AttributeList& rAttribs ) { // Excel specific shape client data if( isRootElement() ) switch( nElement ) { case VML_TOKEN( textbox ): if (getParentElement() != VML_TOKEN( group )) { // Custom shape in Writer with a textbox are transformed into a frame dynamic_cast( mrShape ).setService( "com.sun.star.text.TextFrame"); } else if (getCurrentElement() == VML_TOKEN(rect)) // Transform only rectangles into a TextShape inside a groupshape. dynamic_cast(mrShape).setService("com.sun.star.drawing.TextShape"); return new TextBoxContext( *this, mrShapeModel.createTextBox(mrShape.getTypeModel()), rAttribs, mrShape.getDrawing().getFilter().getGraphicHelper()); case VMLX_TOKEN( ClientData ): return new ClientDataContext( *this, mrShapeModel.createClientData(), rAttribs ); case VMLPPT_TOKEN( textdata ): // Force RectangleShape, this is ugly :( // and is there because of the lines above which change it to TextFrame dynamic_cast< SimpleShape& >( mrShape ).setService( "com.sun.star.drawing.RectangleShape"); mrShapeModel.maLegacyDiagramPath = getFragmentPathFromRelId(rAttribs.getString(XML_id, OUString())); break; } // handle remaining stuff in base class return ShapeTypeContext::onCreateContext( nElement, rAttribs ); } void ShapeContext::setPoints( const OUString& rPoints ) { mrShapeModel.maPoints.clear(); sal_Int32 nIndex = 0; while( nIndex >= 0 ) { sal_Int32 nX = rPoints.getToken( 0, ',', nIndex ).toInt32(); sal_Int32 nY = rPoints.getToken( 0, ',', nIndex ).toInt32(); mrShapeModel.maPoints.push_back( awt::Point( nX, nY ) ); } } void ShapeContext::setFrom( const OUString& rPoints ) { if (!rPoints.isEmpty()) mrShapeModel.maFrom = rPoints; } void ShapeContext::setTo( const OUString& rPoints ) { if (!rPoints.isEmpty()) mrShapeModel.maTo = rPoints; } void ShapeContext::setControl1( const OUString& rPoints ) { if (!rPoints.isEmpty()) mrShapeModel.maControl1 = rPoints; } void ShapeContext::setControl2( const OUString& rPoints ) { if (!rPoints.isEmpty()) mrShapeModel.maControl2 = rPoints; } void ShapeContext::setVmlPath( const OUString& rPath ) { if (!rPath.isEmpty()) mrShapeModel.maVmlPath = rPath; } GroupShapeContext::GroupShapeContext( ContextHandler2Helper& rParent, GroupShape& rShape, const AttributeList& rAttribs ) : ShapeContext( rParent, rShape, rAttribs ), mrShapes( rShape.getChildren() ) { } ContextHandlerRef GroupShapeContext::onCreateContext( sal_Int32 nElement, const AttributeList& rAttribs ) { // try to create a context of an embedded shape ContextHandlerRef xContext = createShapeContext( *this, mrShapes, nElement, rAttribs ); // handle remaining stuff of this shape in base class return xContext.get() ? xContext : ShapeContext::onCreateContext( nElement, rAttribs ); } RectangleShapeContext::RectangleShapeContext( ContextHandler2Helper& rParent, const AttributeList& rAttribs, RectangleShape& rShape ) : ShapeContext( rParent, rShape, rAttribs ) { } ContextHandlerRef RectangleShapeContext::onCreateContext( sal_Int32 nElement, const AttributeList& rAttribs ) { // The parent class's context is fine return ShapeContext::onCreateContext( nElement, rAttribs ); } } // namespace vml } // namespace oox /* vim:set shiftwidth=4 softtabstop=4 expandtab: */