/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */


// testcomponent - Loads a service and its testcomponent from dlls performs a test.
// Expands the dll-names depending on the actual environment.
// Example : testcomponent com.sun.star.io.Pipe stm

// Therefore the testcode must exist in teststm and the testservice must be named test.com.sun.star.uno.io.Pipe


#include <stdio.h>
#include <vector>
#include <cstring>

#include <com/sun/star/registry/XImplementationRegistration.hpp>
#include <com/sun/star/lang/XComponent.hpp>

#include <com/sun/star/xml/sax/SAXParseException.hpp>
#include <com/sun/star/xml/sax/XParser.hpp>
#include <com/sun/star/xml/sax/XExtendedDocumentHandler.hpp>

#include <com/sun/star/io/XOutputStream.hpp>
#include <com/sun/star/io/XActiveDataSource.hpp>

#include <cppuhelper/servicefactory.hxx>
#include <cppuhelper/implbase.hxx>


using namespace ::std;
using namespace ::cppu;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::registry;
using namespace ::com::sun::star::xml::sax;
using namespace ::com::sun::star::io;


/************
 * Sequence of bytes -> InputStream
 ************/
class OInputStream : public WeakImplHelper < XInputStream >
{
public:
    explicit OInputStream( const Sequence< sal_Int8 >&seq ) :
        m_seq( seq ),
        nPos( 0 )
        {}

public:
    virtual sal_Int32 SAL_CALL readBytes( Sequence< sal_Int8 >& aData, sal_Int32 nBytesToRead )
        throw(NotConnectedException, BufferSizeExceededException, IOException, RuntimeException)
        {
            nBytesToRead = (nBytesToRead > m_seq.getLength() - nPos ) ?
                m_seq.getLength() - nPos :
                nBytesToRead;
            aData = Sequence< sal_Int8 > ( &(m_seq.getConstArray()[nPos]) , nBytesToRead );
            nPos += nBytesToRead;
            return nBytesToRead;
        }
    virtual sal_Int32 SAL_CALL readSomeBytes(
        css::uno::Sequence< sal_Int8 >& aData,
        sal_Int32 nMaxBytesToRead )
        throw(NotConnectedException, BufferSizeExceededException, IOException, RuntimeException)
        {
            return readBytes( aData, nMaxBytesToRead );
        }
    virtual void SAL_CALL skipBytes( sal_Int32 /* nBytesToSkip */ )
        throw(NotConnectedException, BufferSizeExceededException, IOException, RuntimeException)
        {
            // not implemented
        }
    virtual sal_Int32 SAL_CALL available(  )
        throw(NotConnectedException, IOException, RuntimeException)
        {
            return m_seq.getLength() - nPos;
        }
    virtual void SAL_CALL closeInput(  )
        throw(NotConnectedException, IOException, RuntimeException)
        {
            // not needed
        }
    Sequence< sal_Int8> m_seq;
    sal_Int32 nPos;
};


// Helper : create an input stream from a file

Reference< XInputStream > createStreamFromFile(
    const char *pcFile )
{
    FILE *f = fopen( pcFile , "rb" );
    Reference<  XInputStream >  r;

    if( f ) {
        fseek( f , 0 , SEEK_END );
        int nLength = ftell( f );
        fseek( f , 0 , SEEK_SET );

        Sequence<sal_Int8> seqIn(nLength);
        fread( seqIn.getArray() , nLength , 1 , f );

        r.set( new OInputStream( seqIn ) );
        fclose( f );
    }
    return r;
}


// The document handler, which is needed for the saxparser
// The Documenthandler for reading sax

class TestDocumentHandler :
    public WeakImplHelper< XExtendedDocumentHandler , XEntityResolver , XErrorHandler >
{
public:
    TestDocumentHandler(  )
    {
    }

public: // Error handler
    virtual void SAL_CALL error(const Any& aSAXParseException) throw (SAXException, RuntimeException)
    {
        printf( "Error !\n" );
        throw  SAXException(
            OUString( "error from error handler") ,
            Reference < XInterface >() ,
            aSAXParseException );
    }
    virtual void SAL_CALL fatalError(const Any& /* aSAXParseException */) throw (SAXException, RuntimeException)
    {
        printf( "Fatal Error !\n" );
    }
    virtual void SAL_CALL warning(const Any& /* aSAXParseException */) throw (SAXException, RuntimeException)
    {
        printf( "Warning !\n" );
    }


public: // ExtendedDocumentHandler

    virtual void SAL_CALL startDocument() throw (SAXException, RuntimeException)
    {
        m_iElementCount = 0;
        m_iAttributeCount = 0;
        m_iWhitespaceCount =0;
        m_iCharCount=0;
           printf( "document started\n" );
    }
    virtual void SAL_CALL endDocument() throw (SAXException, RuntimeException)
    {
        printf( "document finished\n" );
        printf( "(ElementCount %d),(AttributeCount %d),(WhitespaceCount %d),(CharCount %d)\n",
                m_iElementCount, m_iAttributeCount, m_iWhitespaceCount , m_iCharCount );

    }
    virtual void SAL_CALL startElement(const OUString& /* aName */,
                              const Reference< XAttributeList > & xAttribs)
        throw (SAXException,RuntimeException)
    {
        m_iElementCount ++;
        m_iAttributeCount += xAttribs->getLength();
    }

    virtual void SAL_CALL endElement(const OUString& /* aName */) throw (SAXException,RuntimeException)
    {
        // ignored
    }

    virtual void SAL_CALL characters(const OUString& aChars) throw (SAXException,RuntimeException)
    {
        m_iCharCount += aChars.getLength();
    }
    virtual void SAL_CALL ignorableWhitespace(const OUString& aWhitespaces) throw (SAXException,RuntimeException)
    {
        m_iWhitespaceCount += aWhitespaces.getLength();
    }

    virtual void SAL_CALL processingInstruction(const OUString& /* aTarget */, const OUString& /* aData */) throw (SAXException,RuntimeException)
    {
        // ignored
    }

    virtual void SAL_CALL setDocumentLocator(const Reference< XLocator> & /* xLocator */)
        throw (SAXException,RuntimeException)
    {
        // ignored
    }

    virtual InputSource SAL_CALL resolveEntity(
        const OUString& sPublicId,
        const OUString& sSystemId)
        throw (RuntimeException)
    {
        InputSource source;
        source.sSystemId = sSystemId;
        source.sPublicId = sPublicId;

        source.aInputStream = createStreamFromFile(
            OUStringToOString( sSystemId, RTL_TEXTENCODING_ASCII_US).getStr() );

        return source;
    }

    virtual void SAL_CALL startCDATA() throw (SAXException,RuntimeException)
    {
    }
    virtual void SAL_CALL endCDATA() throw (SAXException,RuntimeException)
    {
    }
    virtual void SAL_CALL comment(const OUString& /* sComment */) throw (SAXException,RuntimeException)
    {
    }
    virtual void SAL_CALL unknown(const OUString& /* sString */) throw (SAXException,RuntimeException)
    {
    }

    virtual void SAL_CALL allowLineBreak() throw (SAXException, RuntimeException )
    {

    }

public:
    int m_iElementCount;
    int m_iAttributeCount;
    int m_iWhitespaceCount;
    int m_iCharCount;
};


// helper implementation for writing
// implements an XAttributeList

struct AttributeListImpl_impl;
class AttributeListImpl : public WeakImplHelper< XAttributeList >
{
public:
    AttributeListImpl();
    AttributeListImpl( const AttributeListImpl & );
    ~AttributeListImpl();

public:
    virtual sal_Int16 SAL_CALL getLength() throw  (RuntimeException);
    virtual OUString SAL_CALL getNameByIndex(sal_Int16 i) throw  (RuntimeException);
    virtual OUString SAL_CALL getTypeByIndex(sal_Int16 i) throw  (RuntimeException);
    virtual OUString SAL_CALL getTypeByName(const OUString& aName) throw  (RuntimeException);
    virtual OUString SAL_CALL getValueByIndex(sal_Int16 i) throw  (RuntimeException);
    virtual OUString SAL_CALL getValueByName(const OUString& aName) throw  (RuntimeException);

public:
    void addAttribute( const OUString &sName ,
                       const OUString &sType ,
                       const OUString &sValue );
    void clear();

private:
    struct AttributeListImpl_impl *m_pImpl;
};


struct TagAttribute
{
    TagAttribute(){}
    TagAttribute( const OUString &s_Name,
                  const OUString &s_Type ,
                  const OUString &s_Value )
      : sName(s_Name),
        sType(s_Type),
        sValue(s_Value)
    {
    }

    OUString sName;
    OUString sType;
    OUString sValue;
};

struct AttributeListImpl_impl
{
    AttributeListImpl_impl()
    {
        // performance improvement during adding
        vecAttribute.reserve(20);
    }
    vector<struct TagAttribute> vecAttribute;
};


sal_Int16 AttributeListImpl::getLength() throw  (RuntimeException)
{
    return (sal_Int16) m_pImpl->vecAttribute.size();
}


AttributeListImpl::AttributeListImpl( const AttributeListImpl &r )
{
    m_pImpl = new AttributeListImpl_impl;
    *m_pImpl = *(r.m_pImpl);
}

OUString AttributeListImpl::getNameByIndex(sal_Int16 i) throw  (RuntimeException)
{
    if( i < sal::static_int_cast<sal_Int16>(m_pImpl->vecAttribute.size()) ) {
        return m_pImpl->vecAttribute[i].sName;
    }
    return OUString();
}


OUString AttributeListImpl::getTypeByIndex(sal_Int16 i) throw  (RuntimeException)
{
    if( i < sal::static_int_cast<sal_Int16>(m_pImpl->vecAttribute.size()) ) {
        return m_pImpl->vecAttribute[i].sType;
    }
    return OUString();
}

OUString AttributeListImpl::getValueByIndex(sal_Int16 i) throw  (RuntimeException)
{
    if( i < sal::static_int_cast<sal_Int16>(m_pImpl->vecAttribute.size()) ) {
        return m_pImpl->vecAttribute[i].sValue;
    }
    return OUString();

}

OUString AttributeListImpl::getTypeByName( const OUString& sName ) throw  (RuntimeException)
{
    auto ii = std::find_if(m_pImpl->vecAttribute.begin(), m_pImpl->vecAttribute.end(),
        [&sName](const struct TagAttribute& rAttr) { return rAttr.sName == sName; });
    if (ii != m_pImpl->vecAttribute.end())
        return (*ii).sType;
    return OUString();
}

OUString AttributeListImpl::getValueByName(const OUString& sName) throw  (RuntimeException)
{
    auto ii = std::find_if(m_pImpl->vecAttribute.begin(), m_pImpl->vecAttribute.end(),
        [&sName](const struct TagAttribute& rAttr) { return rAttr.sName == sName; });
    if (ii != m_pImpl->vecAttribute.end())
        return (*ii).sValue;
    return OUString();
}


AttributeListImpl::AttributeListImpl()
{
    m_pImpl = new AttributeListImpl_impl;
}


AttributeListImpl::~AttributeListImpl()
{
    delete m_pImpl;
}


void AttributeListImpl::addAttribute(   const OUString &sName ,
                                        const OUString &sType ,
                                        const OUString &sValue )
{
    m_pImpl->vecAttribute.push_back( TagAttribute( sName , sType , sValue ) );
}

void AttributeListImpl::clear()
{
    m_pImpl->vecAttribute.clear();
}


// helper function for writing
// ensures that linebreaks are inserted
// when writing a long text.
// Note: this implementation may be a bit slow,
// but it shows, how the SAX-Writer handles the allowLineBreak calls.

void writeParagraphHelper(
    const  Reference< XExtendedDocumentHandler > &r ,
    const OUString & s)
{
    int nMax = s.getLength();
    int nStart = 0;
    int n = 1;

    Sequence<sal_uInt16> seq( s.getLength() );
    memcpy( seq.getArray() , s.getStr() , s.getLength() * sizeof( sal_uInt16 ) );

    for( n = 1 ; n < nMax ; n++ ){
        if( 32 == seq.getArray()[n] ) {
            r->allowLineBreak();
            r->characters( s.copy( nStart , n - nStart ) );
            nStart = n;
        }
    }
    r->allowLineBreak();
    r->characters( s.copy( nStart , n - nStart ) );
}


// helper implementation for SAX-Writer
// writes data to a file

class OFileWriter :
        public WeakImplHelper< XOutputStream >
{
public:
    explicit OFileWriter( char *pcFile ) { strncpy( m_pcFile , pcFile, 256 - 1 ); m_f = 0; }


public:
    virtual void SAL_CALL writeBytes(const Sequence< sal_Int8 >& aData)
        throw  (NotConnectedException, BufferSizeExceededException, RuntimeException);
    virtual void SAL_CALL flush()
        throw  (NotConnectedException, BufferSizeExceededException, RuntimeException);
    virtual void SAL_CALL closeOutput()
        throw  (NotConnectedException, BufferSizeExceededException, RuntimeException);
private:
    char m_pcFile[256];
    FILE *m_f;
};


void OFileWriter::writeBytes(const Sequence< sal_Int8 >& aData)
    throw  (NotConnectedException, BufferSizeExceededException, RuntimeException)
{
    if( ! m_f ) {
        m_f = fopen( m_pcFile , "w" );
    }

    fwrite( aData.getConstArray() , 1 , aData.getLength() , m_f );
}


void OFileWriter::flush()
    throw  (NotConnectedException, BufferSizeExceededException, RuntimeException)
{
    fflush( m_f );
}

void OFileWriter::closeOutput()
    throw  (NotConnectedException, BufferSizeExceededException, RuntimeException)
{
    fclose( m_f );
    m_f = 0;
}


// Needed to switch on solaris threads
#ifdef __sun
extern "C" void ChangeGlobalInit();
#endif
int main (int argc, char **argv)
{

    if( argc < 3) {
        printf( "usage : saxdemo inputfile outputfile\n" );
        exit( 0 );
    }
#ifdef __sun
    // switch on threads in solaris
    ChangeGlobalInit();
#endif

    // create service manager
    Reference< XMultiServiceFactory > xSMgr = createRegistryServiceFactory(
        OUString(  "applicat.rdb" ) );

    Reference < XImplementationRegistration > xReg;
    try
    {
        // Create registration service
        Reference < XInterface > x = xSMgr->createInstance( "com.sun.star.registry.ImplementationRegistration" );
        xReg.set( x , UNO_QUERY );
    }
    catch( Exception & ) {
        printf( "Couldn't create ImplementationRegistration service\n" );
        exit(1);
    }

    OString sTestName;
    try
    {
        // Load dll for the tested component
        OUString aDllName( "sax.uno" SAL_DLLEXTENSION );
        xReg->registerImplementation(
            OUString("com.sun.star.loader.SharedLibrary"),
            aDllName,
            Reference< XSimpleRegistry > ()  );
    }
    catch( Exception &e ) {
        printf( "Couldn't reach sax dll\n" );
        printf( "%s\n" , OUStringToOString( e.Message , RTL_TEXTENCODING_ASCII_US ).getStr() );

        exit(1);
    }


    // parser demo
    // read xml from a file and count elements

    Reference< XInterface > x = xSMgr->createInstance( "com.sun.star.xml.sax.Parser" );
    if( x.is() )
    {
        Reference< XParser > rParser( x , UNO_QUERY );

        // create and connect the document handler to the parser
        TestDocumentHandler *pDocHandler = new TestDocumentHandler( );

        Reference < XDocumentHandler >  rDocHandler( (XDocumentHandler *) pDocHandler );
        Reference< XEntityResolver > rEntityResolver( (XEntityResolver *) pDocHandler );

        rParser->setDocumentHandler( rDocHandler );
        rParser->setEntityResolver( rEntityResolver );

        // create the input stream
        InputSource source;
        source.aInputStream = createStreamFromFile( argv[1] );
        source.sSystemId    = OUString::createFromAscii( argv[1] );

        try
        {
            // start parsing
            rParser->parseStream( source );
        }

        catch( Exception & e )
        {
            OString o1 = OUStringToOString(e.Message, RTL_TEXTENCODING_UTF8 );
            printf( "Exception during parsing : %s\n" ,  o1.getStr() );
        }
    }
    else
    {
        printf( "couldn't create sax-parser component\n" );
    }


    // The SAX-Writer demo

    x= xSMgr->createInstance("com.sun.star.xml.sax.Writer");
    if( x.is() )
    {
        printf( "start writing to %s\n" , argv[2] );

        OFileWriter *pw = new OFileWriter( argv[2] );
        Reference< XActiveDataSource > source( x , UNO_QUERY );
        source->setOutputStream( Reference< XOutputStream> ( (XOutputStream*) pw ) );

        AttributeListImpl *pList = new AttributeListImpl;
        Reference< XAttributeList > rList( (XAttributeList *) pList );

        Reference< XExtendedDocumentHandler > r( x , UNO_QUERY );
        r->startDocument();

        pList->addAttribute( OUString( "Arg1" ),
                             OUString( "CDATA") ,
                             OUString( "foo\n   u") );
        pList->addAttribute( OUString( "Arg2") ,
                             OUString( "CDATA") ,
                             OUString( "foo2") );

        r->startElement( OUString( "tag1")  , rList );
        // tells the writer to insert a linefeed
        r->ignorableWhitespace( OUString() );

        r->characters( OUString( "huhu") );
        r->ignorableWhitespace( OUString() );

        r->startElement( OUString( "hi") , rList );
        r->ignorableWhitespace( OUString() );

        // the enpassant must be converted & -> &amp;
        r->characters( OUString( "&#252;") );
        r->ignorableWhitespace( OUString() );

        // '>' must not be converted
        r->startCDATA();
        r->characters( OUString( " > foo < ")  );
        r->endCDATA();
        r->ignorableWhitespace( OUString() );

        OUString testParagraph = OUString(
            "This is only a test to check, if the writer inserts line feeds "
            "if needed or if the writer puts the whole text into one line." );
        writeParagraphHelper( r , testParagraph );

        r->ignorableWhitespace( OUString() );
        r->comment( OUString( "This is a comment !") );
        r->ignorableWhitespace( OUString() );

        r->startElement( OUString( "emptytagtest")  , rList );
        r->endElement( OUString( "emptytagtest") );
        r->ignorableWhitespace( OUString() );

        r->endElement( OUString( "hi") );
        r->ignorableWhitespace( OUString() );

        r->endElement( OUString( "tag1") );
        r->endDocument();

        printf( "finished writing\n" );
    }
    else
    {
        printf( "couldn't create sax-writer component\n" );
    }
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
-personas'>feature/gsoc14-personas</option>
<option value='feature/gsoc14-personas2'>feature/gsoc14-personas2</option>
<option value='feature/gsoc15-online-update'>feature/gsoc15-online-update</option>
<option value='feature/gsoc15-open-remote-files-dialog'>feature/gsoc15-open-remote-files-dialog</option>
<option value='feature/gsoc17-revamp-customize-dialog'>feature/gsoc17-revamp-customize-dialog</option>
<option value='feature/gsoc19-chart-style'>feature/gsoc19-chart-style</option>
<option value='feature/gsoc2011_wizards'>feature/gsoc2011_wizards</option>
<option value='feature/gsoc24-lua'>feature/gsoc24-lua</option>
<option value='feature/gtk3_kde5'>feature/gtk3_kde5</option>
<option value='feature/gtk3nativedialogs'>feature/gtk3nativedialogs</option>
<option value='feature/gtktiledviewer'>feature/gtktiledviewer</option>
<option value='feature/ia2'>feature/ia2</option>
<option value='feature/ia2.2'>feature/ia2.2</option>
<option value='feature/ia2.3'>feature/ia2.3</option>
<option value='feature/ia2.4'>feature/ia2.4</option>
<option value='feature/ia2.5'>feature/ia2.5</option>
<option value='feature/improvexlsximport'>feature/improvexlsximport</option>
<option value='feature/instdirlinktargets'>feature/instdirlinktargets</option>
<option value='feature/item_refactor2'>feature/item_refactor2</option>
<option value='feature/jsdialogs'>feature/jsdialogs</option>
<option value='feature/jssidebar'>feature/jssidebar</option>
<option value='feature/lfrb-vcl-opengl'>feature/lfrb-vcl-opengl</option>
<option value='feature/libffi'>feature/libffi</option>
<option value='feature/lok-calc-rtl'>feature/lok-calc-rtl</option>
<option value='feature/lok-clipboard'>feature/lok-clipboard</option>
<option value='feature/lok_cellcursor'>feature/lok_cellcursor</option>
<option value='feature/lok_dialog'>feature/lok_dialog</option>
<option value='feature/lok_dialog-backport'>feature/lok_dialog-backport</option>
<option value='feature/lok_dialog2'>feature/lok_dialog2</option>
<option value='feature/lok_sofficemain'>feature/lok_sofficemain</option>
<option value='feature/lok_sofficemain2'>feature/lok_sofficemain2</option>
<option value='feature/mac-opengl-fixes'>feature/mac-opengl-fixes</option>
<option value='feature/macOS-weld'>feature/macOS-weld</option>
<option value='feature/mailmerge-toolbar'>feature/mailmerge-toolbar</option>
<option value='feature/mar-updater'>feature/mar-updater</option>
<option value='feature/mariadb'>feature/mariadb</option>
<option value='feature/misc-vba-rework'>feature/misc-vba-rework</option>
<option value='feature/mork'>feature/mork</option>
<option value='feature/nativealpha'>feature/nativealpha</option>
<option value='feature/notebookbar'>feature/notebookbar</option>
<option value='feature/notes-refactoring'>feature/notes-refactoring</option>
<option value='feature/ooxml-analyze'>feature/ooxml-analyze</option>
<option value='feature/opengl-canvas-rework'>feature/opengl-canvas-rework</option>
<option value='feature/opengl-transitions-rework'>feature/opengl-transitions-rework</option>
<option value='feature/opengl-vcl-text'>feature/opengl-vcl-text</option>
<option value='feature/orcus-continuous-integration'>feature/orcus-continuous-integration</option>
<option value='feature/orcus-odf'>feature/orcus-odf</option>
<option value='feature/orcus-odf-rebased'>feature/orcus-odf-rebased</option>
<option value='feature/orcus-odf-rebased2'>feature/orcus-odf-rebased2</option>
<option value='feature/orcus-rebased'>feature/orcus-rebased</option>
<option value='feature/owncloud-provider-for-android'>feature/owncloud-provider-for-android</option>
<option value='feature/pdfium-master'>feature/pdfium-master</option>
<option value='feature/perfwork4'>feature/perfwork4</option>
<option value='feature/perfwork5'>feature/perfwork5</option>
<option value='feature/pivotcharts'>feature/pivotcharts</option>
<option value='feature/print_revamp'>feature/print_revamp</option>
<option value='feature/priorities'>feature/priorities</option>
<option value='feature/profilesafemode'>feature/profilesafemode</option>
<option value='feature/propose-master-cib'>feature/propose-master-cib</option>
<option value='feature/pytable'>feature/pytable</option>
<option value='feature/pyweb-wizard'>feature/pyweb-wizard</option>
<option value='feature/qt5-win+mac'>feature/qt5-win+mac</option>
<option value='feature/refactor-god-objects'>feature/refactor-god-objects</option>
<option value='feature/rendercontext'>feature/rendercontext</option>
<option value='feature/resolve-comments'>feature/resolve-comments</option>
<option value='feature/scaling-geometry-provider'>feature/scaling-geometry-provider</option>
<option value='feature/screenshotannotation'>feature/screenshotannotation</option>
<option value='feature/sgexperiment'>feature/sgexperiment</option>
<option value='feature/skia'>feature/skia</option>
<option value='feature/slidehack'>feature/slidehack</option>
<option value='feature/slidehack2'>feature/slidehack2</option>
<option value='feature/slideshow_onlySprites'>feature/slideshow_onlySprites</option>
<option value='feature/slideshowprimitives'>feature/slideshowprimitives</option>
<option value='feature/sparklines'>feature/sparklines</option>
<option value='feature/spellig_popup_SID'>feature/spellig_popup_SID</option>
<option value='feature/stub_writer'>feature/stub_writer</option>
<option value='feature/svg-export'>feature/svg-export</option>
<option value='feature/svg-optimisations'>feature/svg-optimisations</option>
<option value='feature/svg-optimisations-5-0'>feature/svg-optimisations-5-0</option>
<option value='feature/sw-delete-undo-rework'>feature/sw-delete-undo-rework</option>
<option value='feature/sw_redlinehide_4a_for_libreoffice-6-2'>feature/sw_redlinehide_4a_for_libreoffice-6-2</option>
<option value='feature/sw_redlinehide_4b_for_libreoffice-6-2'>feature/sw_redlinehide_4b_for_libreoffice-6-2</option>
<option value='feature/table-style'>feature/table-style</option>
<option value='feature/table-style-rebased'>feature/table-style-rebased</option>
<option value='feature/table_panel'>feature/table_panel</option>
<option value='feature/table_rotated_text'>feature/table_rotated_text</option>
<option value='feature/taggedPDF'>feature/taggedPDF</option>
<option value='feature/template_manager_improvements'>feature/template_manager_improvements</option>
<option value='feature/template_manager_improvements2'>feature/template_manager_improvements2</option>
<option value='feature/themesupport'>feature/themesupport</option>
<option value='feature/themesupport2'>feature/themesupport2</option>
<option value='feature/tiled-editing'>feature/tiled-editing</option>
<option value='feature/tscp3'>feature/tscp3</option>
<option value='feature/unitver'>feature/unitver</option>
<option value='feature/unocrsrptr'>feature/unocrsrptr</option>
<option value='feature/unostyles'>feature/unostyles</option>
<option value='feature/unostyles2'>feature/unostyles2</option>
<option value='feature/unostyles3'>feature/unostyles3</option>
<option value='feature/use-ogl-context-in-canvas'>feature/use-ogl-context-in-canvas</option>
<option value='feature/vcl-opengl'>feature/vcl-opengl</option>
<option value='feature/vcl-opengl-integration'>feature/vcl-opengl-integration</option>
<option value='feature/vcl-opengl2'>feature/vcl-opengl2</option>
<option value='feature/vclptr'>feature/vclptr</option>
<option value='feature/vlc'>feature/vlc</option>
<option value='feature/vlc-rb'>feature/vlc-rb</option>
<option value='feature/vs2012'>feature/vs2012</option>
<option value='feature/wasm'>feature/wasm</option>
<option value='feature/window-iter'>feature/window-iter</option>
<option value='feature/windows-cross-build'>feature/windows-cross-build</option>
<option value='feature/windowsupdater'>feature/windowsupdater</option>
<option value='feature/xtiledrenderable'>feature/xtiledrenderable</option>
<option value='libreoffice-24-2'>libreoffice-24-2</option>
<option value='libreoffice-24-2-0'>libreoffice-24-2-0</option>
<option value='libreoffice-24-2-1'>libreoffice-24-2-1</option>
<option value='libreoffice-24-2-2'>libreoffice-24-2-2</option>
<option value='libreoffice-24-2-3'>libreoffice-24-2-3</option>
<option value='libreoffice-24-2-4'>libreoffice-24-2-4</option>
<option value='libreoffice-24-2-5'>libreoffice-24-2-5</option>
<option value='libreoffice-24-2-6'>libreoffice-24-2-6</option>
<option value='libreoffice-24-2-7'>libreoffice-24-2-7</option>
<option value='libreoffice-24-8'>libreoffice-24-8</option>
<option value='libreoffice-24-8-0'>libreoffice-24-8-0</option>
<option value='libreoffice-24-8-1'>libreoffice-24-8-1</option>
<option value='libreoffice-24-8-2'>libreoffice-24-8-2</option>
<option value='libreoffice-24-8-3'>libreoffice-24-8-3</option>
<option value='libreoffice-24-8-4'>libreoffice-24-8-4</option>
<option value='libreoffice-25-2'>libreoffice-25-2</option>
<option value='libreoffice-3-5'>libreoffice-3-5</option>
<option value='libreoffice-3-5-0'>libreoffice-3-5-0</option>
<option value='libreoffice-3-5-1'>libreoffice-3-5-1</option>
<option value='libreoffice-3-5-2'>libreoffice-3-5-2</option>
<option value='libreoffice-3-5-3'>libreoffice-3-5-3</option>
<option value='libreoffice-3-5-4'>libreoffice-3-5-4</option>
<option value='libreoffice-3-5-5'>libreoffice-3-5-5</option>
<option value='libreoffice-3-5-6'>libreoffice-3-5-6</option>
<option value='libreoffice-3-5-7'>libreoffice-3-5-7</option>
<option value='libreoffice-3-6'>libreoffice-3-6</option>
<option value='libreoffice-3-6-0'>libreoffice-3-6-0</option>
<option value='libreoffice-3-6-1'>libreoffice-3-6-1</option>
<option value='libreoffice-3-6-2'>libreoffice-3-6-2</option>
<option value='libreoffice-3-6-3'>libreoffice-3-6-3</option>
<option value='libreoffice-3-6-4'>libreoffice-3-6-4</option>
<option value='libreoffice-3-6-5'>libreoffice-3-6-5</option>
<option value='libreoffice-3-6-6'>libreoffice-3-6-6</option>
<option value='libreoffice-3-6-7'>libreoffice-3-6-7</option>
<option value='libreoffice-4-0'>libreoffice-4-0</option>
<option value='libreoffice-4-0-0'>libreoffice-4-0-0</option>
<option value='libreoffice-4-0-1'>libreoffice-4-0-1</option>
<option value='libreoffice-4-0-2'>libreoffice-4-0-2</option>
<option value='libreoffice-4-0-3'>libreoffice-4-0-3</option>
<option value='libreoffice-4-0-4'>libreoffice-4-0-4</option>
<option value='libreoffice-4-0-5'>libreoffice-4-0-5</option>
<option value='libreoffice-4-0-6'>libreoffice-4-0-6</option>
<option value='libreoffice-4-1'>libreoffice-4-1</option>
<option value='libreoffice-4-1-0'>libreoffice-4-1-0</option>
<option value='libreoffice-4-1-1'>libreoffice-4-1-1</option>
<option value='libreoffice-4-1-2'>libreoffice-4-1-2</option>
<option value='libreoffice-4-1-3'>libreoffice-4-1-3</option>
<option value='libreoffice-4-1-4'>libreoffice-4-1-4</option>
<option value='libreoffice-4-1-5'>libreoffice-4-1-5</option>
<option value='libreoffice-4-1-6'>libreoffice-4-1-6</option>
<option value='libreoffice-4-2'>libreoffice-4-2</option>
<option value='libreoffice-4-2-0'>libreoffice-4-2-0</option>
<option value='libreoffice-4-2-1'>libreoffice-4-2-1</option>
<option value='libreoffice-4-2-2'>libreoffice-4-2-2</option>
<option value='libreoffice-4-2-3'>libreoffice-4-2-3</option>
<option value='libreoffice-4-2-4'>libreoffice-4-2-4</option>
<option value='libreoffice-4-2-5'>libreoffice-4-2-5</option>
<option value='libreoffice-4-2-6'>libreoffice-4-2-6</option>
<option value='libreoffice-4-2-7'>libreoffice-4-2-7</option>
<option value='libreoffice-4-2-8'>libreoffice-4-2-8</option>
<option value='libreoffice-4-3'>libreoffice-4-3</option>
<option value='libreoffice-4-3-0'>libreoffice-4-3-0</option>
<option value='libreoffice-4-3-1'>libreoffice-4-3-1</option>
<option value='libreoffice-4-3-2'>libreoffice-4-3-2</option>
<option value='libreoffice-4-3-3'>libreoffice-4-3-3</option>
<option value='libreoffice-4-3-4'>libreoffice-4-3-4</option>
<option value='libreoffice-4-3-5'>libreoffice-4-3-5</option>
<option value='libreoffice-4-3-6'>libreoffice-4-3-6</option>
<option value='libreoffice-4-3-7'>libreoffice-4-3-7</option>
<option value='libreoffice-4-4'>libreoffice-4-4</option>
<option value='libreoffice-4-4-0'>libreoffice-4-4-0</option>
<option value='libreoffice-4-4-1'>libreoffice-4-4-1</option>
<option value='libreoffice-4-4-2'>libreoffice-4-4-2</option>
<option value='libreoffice-4-4-3'>libreoffice-4-4-3</option>
<option value='libreoffice-4-4-4'>libreoffice-4-4-4</option>
<option value='libreoffice-4-4-5'>libreoffice-4-4-5</option>
<option value='libreoffice-4-4-6'>libreoffice-4-4-6</option>
<option value='libreoffice-4-4-7'>libreoffice-4-4-7</option>
<option value='libreoffice-5-0'>libreoffice-5-0</option>
<option value='libreoffice-5-0-0'>libreoffice-5-0-0</option>
<option value='libreoffice-5-0-1'>libreoffice-5-0-1</option>
<option value='libreoffice-5-0-2'>libreoffice-5-0-2</option>
<option value='libreoffice-5-0-3'>libreoffice-5-0-3</option>
<option value='libreoffice-5-0-4'>libreoffice-5-0-4</option>
<option value='libreoffice-5-0-5'>libreoffice-5-0-5</option>
<option value='libreoffice-5-0-6'>libreoffice-5-0-6</option>
<option value='libreoffice-5-1'>libreoffice-5-1</option>
<option value='libreoffice-5-1-0'>libreoffice-5-1-0</option>
<option value='libreoffice-5-1-1'>libreoffice-5-1-1</option>
<option value='libreoffice-5-1-2'>libreoffice-5-1-2</option>
<option value='libreoffice-5-1-3'>libreoffice-5-1-3</option>
<option value='libreoffice-5-1-4'>libreoffice-5-1-4</option>
<option value='libreoffice-5-1-5'>libreoffice-5-1-5</option>
<option value='libreoffice-5-1-6'>libreoffice-5-1-6</option>
<option value='libreoffice-5-2'>libreoffice-5-2</option>
<option value='libreoffice-5-2-0'>libreoffice-5-2-0</option>
<option value='libreoffice-5-2-1'>libreoffice-5-2-1</option>
<option value='libreoffice-5-2-2'>libreoffice-5-2-2</option>
<option value='libreoffice-5-2-3'>libreoffice-5-2-3</option>
<option value='libreoffice-5-2-4'>libreoffice-5-2-4</option>
<option value='libreoffice-5-2-5'>libreoffice-5-2-5</option>
<option value='libreoffice-5-2-6'>libreoffice-5-2-6</option>
<option value='libreoffice-5-2-7'>libreoffice-5-2-7</option>
<option value='libreoffice-5-3'>libreoffice-5-3</option>
<option value='libreoffice-5-3-0'>libreoffice-5-3-0</option>
<option value='libreoffice-5-3-1'>libreoffice-5-3-1</option>
<option value='libreoffice-5-3-2'>libreoffice-5-3-2</option>
<option value='libreoffice-5-3-3'>libreoffice-5-3-3</option>
<option value='libreoffice-5-3-4'>libreoffice-5-3-4</option>
<option value='libreoffice-5-3-5'>libreoffice-5-3-5</option>
<option value='libreoffice-5-3-6'>libreoffice-5-3-6</option>
<option value='libreoffice-5-3-7'>libreoffice-5-3-7</option>
<option value='libreoffice-5-4'>libreoffice-5-4</option>
<option value='libreoffice-5-4-0'>libreoffice-5-4-0</option>
<option value='libreoffice-5-4-1'>libreoffice-5-4-1</option>
<option value='libreoffice-5-4-2'>libreoffice-5-4-2</option>
<option value='libreoffice-5-4-3'>libreoffice-5-4-3</option>
<option value='libreoffice-5-4-4'>libreoffice-5-4-4</option>
<option value='libreoffice-5-4-5'>libreoffice-5-4-5</option>
<option value='libreoffice-5-4-6'>libreoffice-5-4-6</option>
<option value='libreoffice-5-4-7'>libreoffice-5-4-7</option>
<option value='libreoffice-6-0'>libreoffice-6-0</option>
<option value='libreoffice-6-0-0'>libreoffice-6-0-0</option>
<option value='libreoffice-6-0-1'>libreoffice-6-0-1</option>
<option value='libreoffice-6-0-2'>libreoffice-6-0-2</option>
<option value='libreoffice-6-0-3'>libreoffice-6-0-3</option>
<option value='libreoffice-6-0-4'>libreoffice-6-0-4</option>
<option value='libreoffice-6-0-5'>libreoffice-6-0-5</option>
<option value='libreoffice-6-0-6'>libreoffice-6-0-6</option>
<option value='libreoffice-6-0-7'>libreoffice-6-0-7</option>
<option value='libreoffice-6-1'>libreoffice-6-1</option>
<option value='libreoffice-6-1-0'>libreoffice-6-1-0</option>
<option value='libreoffice-6-1-1'>libreoffice-6-1-1</option>
<option value='libreoffice-6-1-2'>libreoffice-6-1-2</option>
<option value='libreoffice-6-1-3'>libreoffice-6-1-3</option>
<option value='libreoffice-6-1-4'>libreoffice-6-1-4</option>
<option value='libreoffice-6-1-5'>libreoffice-6-1-5</option>
<option value='libreoffice-6-1-6'>libreoffice-6-1-6</option>
<option value='libreoffice-6-2'>libreoffice-6-2</option>
<option value='libreoffice-6-2-0'>libreoffice-6-2-0</option>
<option value='libreoffice-6-2-1'>libreoffice-6-2-1</option>
<option value='libreoffice-6-2-2'>libreoffice-6-2-2</option>
<option value='libreoffice-6-2-3'>libreoffice-6-2-3</option>
<option value='libreoffice-6-2-4'>libreoffice-6-2-4</option>
<option value='libreoffice-6-2-5'>libreoffice-6-2-5</option>
<option value='libreoffice-6-2-6'>libreoffice-6-2-6</option>
<option value='libreoffice-6-2-7'>libreoffice-6-2-7</option>
<option value='libreoffice-6-2-8'>libreoffice-6-2-8</option>
<option value='libreoffice-6-3'>libreoffice-6-3</option>
<option value='libreoffice-6-3-0'>libreoffice-6-3-0</option>
<option value='libreoffice-6-3-1'>libreoffice-6-3-1</option>
<option value='libreoffice-6-3-2'>libreoffice-6-3-2</option>
<option value='libreoffice-6-3-3'>libreoffice-6-3-3</option>
<option value='libreoffice-6-3-4'>libreoffice-6-3-4</option>
<option value='libreoffice-6-3-5'>libreoffice-6-3-5</option>
<option value='libreoffice-6-3-6'>libreoffice-6-3-6</option>
<option value='libreoffice-6-4'>libreoffice-6-4</option>
<option value='libreoffice-6-4-0'>libreoffice-6-4-0</option>
<option value='libreoffice-6-4-1'>libreoffice-6-4-1</option>
<option value='libreoffice-6-4-2'>libreoffice-6-4-2</option>
<option value='libreoffice-6-4-3'>libreoffice-6-4-3</option>
<option value='libreoffice-6-4-4'>libreoffice-6-4-4</option>
<option value='libreoffice-6-4-5'>libreoffice-6-4-5</option>
<option value='libreoffice-6-4-6'>libreoffice-6-4-6</option>
<option value='libreoffice-6-4-7'>libreoffice-6-4-7</option>
<option value='libreoffice-7-0'>libreoffice-7-0</option>
<option value='libreoffice-7-0-0'>libreoffice-7-0-0</option>
<option value='libreoffice-7-0-1'>libreoffice-7-0-1</option>
<option value='libreoffice-7-0-2'>libreoffice-7-0-2</option>
<option value='libreoffice-7-0-3'>libreoffice-7-0-3</option>
<option value='libreoffice-7-0-4'>libreoffice-7-0-4</option>
<option value='libreoffice-7-0-5'>libreoffice-7-0-5</option>
<option value='libreoffice-7-0-6'>libreoffice-7-0-6</option>
<option value='libreoffice-7-1'>libreoffice-7-1</option>
<option value='libreoffice-7-1-0'>libreoffice-7-1-0</option>
<option value='libreoffice-7-1-1'>libreoffice-7-1-1</option>
<option value='libreoffice-7-1-2'>libreoffice-7-1-2</option>
<option value='libreoffice-7-1-3'>libreoffice-7-1-3</option>
<option value='libreoffice-7-1-4'>libreoffice-7-1-4</option>
<option value='libreoffice-7-1-5'>libreoffice-7-1-5</option>
<option value='libreoffice-7-1-6'>libreoffice-7-1-6</option>
<option value='libreoffice-7-1-7'>libreoffice-7-1-7</option>
<option value='libreoffice-7-2'>libreoffice-7-2</option>
<option value='libreoffice-7-2-0'>libreoffice-7-2-0</option>
<option value='libreoffice-7-2-1'>libreoffice-7-2-1</option>
<option value='libreoffice-7-2-2'>libreoffice-7-2-2</option>
<option value='libreoffice-7-2-3'>libreoffice-7-2-3</option>
<option value='libreoffice-7-2-5'>libreoffice-7-2-5</option>
<option value='libreoffice-7-2-6'>libreoffice-7-2-6</option>
<option value='libreoffice-7-2-7'>libreoffice-7-2-7</option>
<option value='libreoffice-7-3'>libreoffice-7-3</option>
<option value='libreoffice-7-3-0'>libreoffice-7-3-0</option>
<option value='libreoffice-7-3-1'>libreoffice-7-3-1</option>
<option value='libreoffice-7-3-2'>libreoffice-7-3-2</option>
<option value='libreoffice-7-3-3'>libreoffice-7-3-3</option>
<option value='libreoffice-7-3-4'>libreoffice-7-3-4</option>
<option value='libreoffice-7-3-5'>libreoffice-7-3-5</option>
<option value='libreoffice-7-3-6'>libreoffice-7-3-6</option>
<option value='libreoffice-7-3-7'>libreoffice-7-3-7</option>
<option value='libreoffice-7-4'>libreoffice-7-4</option>
<option value='libreoffice-7-4-0'>libreoffice-7-4-0</option>
<option value='libreoffice-7-4-1'>libreoffice-7-4-1</option>
<option value='libreoffice-7-4-2'>libreoffice-7-4-2</option>
<option value='libreoffice-7-4-3'>libreoffice-7-4-3</option>
<option value='libreoffice-7-4-4'>libreoffice-7-4-4</option>
<option value='libreoffice-7-4-6'>libreoffice-7-4-6</option>
<option value='libreoffice-7-4-7'>libreoffice-7-4-7</option>
<option value='libreoffice-7-5'>libreoffice-7-5</option>
<option value='libreoffice-7-5-0'>libreoffice-7-5-0</option>
<option value='libreoffice-7-5-1'>libreoffice-7-5-1</option>
<option value='libreoffice-7-5-2'>libreoffice-7-5-2</option>
<option value='libreoffice-7-5-3'>libreoffice-7-5-3</option>
<option value='libreoffice-7-5-4'>libreoffice-7-5-4</option>
<option value='libreoffice-7-5-5'>libreoffice-7-5-5</option>
<option value='libreoffice-7-5-6'>libreoffice-7-5-6</option>
<option value='libreoffice-7-5-7'>libreoffice-7-5-7</option>
<option value='libreoffice-7-5-8'>libreoffice-7-5-8</option>
<option value='libreoffice-7-5-9'>libreoffice-7-5-9</option>
<option value='libreoffice-7-6'>libreoffice-7-6</option>
<option value='libreoffice-7-6-0'>libreoffice-7-6-0</option>
<option value='libreoffice-7-6-1'>libreoffice-7-6-1</option>
<option value='libreoffice-7-6-2'>libreoffice-7-6-2</option>
<option value='libreoffice-7-6-3'>libreoffice-7-6-3</option>
<option value='libreoffice-7-6-4'>libreoffice-7-6-4</option>
<option value='libreoffice-7-6-5'>libreoffice-7-6-5</option>
<option value='libreoffice-7-6-6'>libreoffice-7-6-6</option>
<option value='libreoffice-7-6-7'>libreoffice-7-6-7</option>
<option value='master' selected='selected'>master</option>
<option value='ports/macosx10.5/master'>ports/macosx10.5/master</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded'>private/Ashod/cd-5.3-3.2_import_unloaded</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink'>private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink</option>
<option value='private/Ashod/cd-5.3.3.2'>private/Ashod/cd-5.3.3.2</option>
<option value='private/Ashod/cp-5.0-preinit'>private/Ashod/cp-5.0-preinit</option>
<option value='private/Ashod/fast-calc-rendering'>private/Ashod/fast-calc-rendering</option>
<option value='private/Ashod/pdfium'>private/Ashod/pdfium</option>
<option value='private/Ashod/pdfium_on_master'>private/Ashod/pdfium_on_master</option>
<option value='private/Ashod/pdfium_on_master_fixed'>private/Ashod/pdfium_on_master_fixed</option>
<option value='private/EL-SHREIF/ui_logger'>private/EL-SHREIF/ui_logger</option>
<option value='private/Minion3665/swf-export'>private/Minion3665/swf-export</option>
<option value='private/Rosemary/change-tracking'>private/Rosemary/change-tracking</option>
<option value='private/Sweetshark/killswclient'>private/Sweetshark/killswclient</option>
<option value='private/Sweetshark/lessdepend'>private/Sweetshark/lessdepend</option>
<option value='private/Sweetshark/multilistenerfix'>private/Sweetshark/multilistenerfix</option>
<option value='private/ajrhunt/c4'>private/ajrhunt/c4</option>
<option value='private/ajrhunt/cunit'>private/ajrhunt/cunit</option>
<option value='private/ajrhunt/cunitdemo'>private/ajrhunt/cunitdemo</option>
<option value='private/ajrhunt/firebird-improvement'>private/ajrhunt/firebird-improvement</option>
<option value='private/bansan/chardraw'>private/bansan/chardraw</option>
<option value='private/bubli/textboxchaining'>private/bubli/textboxchaining</option>
<option value='private/hcvcastro/preinit'>private/hcvcastro/preinit</option>
<option value='private/hcvcastro/undo-row-comment'>private/hcvcastro/undo-row-comment</option>
<option value='private/jmux/armin-strip-before-squash'>private/jmux/armin-strip-before-squash</option>
<option value='private/jmux/broken-static-win'>private/jmux/broken-static-win</option>
<option value='private/jmux/current-reorga'>private/jmux/current-reorga</option>
<option value='private/jmux/meson'>private/jmux/meson</option>
<option value='private/jmux/meson-gsoc-2021'>private/jmux/meson-gsoc-2021</option>
<option value='private/jmux/oss-fuzz'>private/jmux/oss-fuzz</option>
<option value='private/jmux/oss-fuzz-wip'>private/jmux/oss-fuzz-wip</option>
<option value='private/jmux/scheduler-fixes'>private/jmux/scheduler-fixes</option>
<option value='private/jmux/shape.odt'>private/jmux/shape.odt</option>
<option value='private/jmux/wasm-for-master'>private/jmux/wasm-for-master</option>
<option value='private/jmux/wasm-tmp'>private/jmux/wasm-tmp</option>
<option value='private/jmux/wasm_for_master_catchall'>private/jmux/wasm_for_master_catchall</option>
<option value='private/jmux/win-arm64'>private/jmux/win-arm64</option>
<option value='private/jmux/win-test-nohang'>private/jmux/win-test-nohang</option>
<option value='private/juergen/Tests'>private/juergen/Tests</option>
<option value='private/juergen/check-cjk'>private/juergen/check-cjk</option>
<option value='private/kendy/condformat-api'>private/kendy/condformat-api</option>
<option value='private/kendy/condformat-fdo82014'>private/kendy/condformat-fdo82014</option>
<option value='private/kendy/mailmerge-04'>private/kendy/mailmerge-04</option>
<option value='private/kendy/mailmerge-05'>private/kendy/mailmerge-05</option>
<option value='private/kendy/swinterpreter'>private/kendy/swinterpreter</option>
<option value='private/kendy/testcl'>private/kendy/testcl</option>
<option value='private/khaledhosny/color-fonts'>private/khaledhosny/color-fonts</option>
<option value='private/khaledhosny/vcl-cleanup-font'>private/khaledhosny/vcl-cleanup-font</option>
<option value='private/kohei/chart-bugs'>private/kohei/chart-bugs</option>
<option value='private/kohei/find-replace-all-perf'>private/kohei/find-replace-all-perf</option>
<option value='private/kohei/headless-perf'>private/kohei/headless-perf</option>
<option value='private/kohei/if-or-not-if-jump'>private/kohei/if-or-not-if-jump</option>
<option value='private/kohei/sort-ref-update'>private/kohei/sort-ref-update</option>
<option value='private/lfrb/opengl-vcl'>private/lfrb/opengl-vcl</option>
<option value='private/lgodard/calc_notes_import_export'>private/lgodard/calc_notes_import_export</option>
<option value='private/lgodard/tdf#117202'>private/lgodard/tdf#117202</option>
<option value='private/llunak/mailmerge'>private/llunak/mailmerge</option>
<option value='private/llunak/mailmerge_01'>private/llunak/mailmerge_01</option>
<option value='private/llunak/mailmerge_02'>private/llunak/mailmerge_02</option>
<option value='private/llunak/mailmerge_03'>private/llunak/mailmerge_03</option>
<option value='private/llunak/munich_12587'>private/llunak/munich_12587</option>
<option value='private/llunak/skia'>private/llunak/skia</option>
<option value='private/lmamane/basetest'>private/lmamane/basetest</option>
<option value='private/lmamane/for-julien2412'>private/lmamane/for-julien2412</option>
<option value='private/lmamane/for-julien2412-master'>private/lmamane/for-julien2412-master</option>
<option value='private/lmamane/tdf110997'>private/lmamane/tdf110997</option>
<option value='private/lmamane/timedate-controls-nanosecond'>private/lmamane/timedate-controls-nanosecond</option>
<option value='private/lmamane/validation'>private/lmamane/validation</option>
<option value='private/mcecchetti/23H1/a11y/paragraph'>private/mcecchetti/23H1/a11y/paragraph</option>
<option value='private/mcecchetti/accessibility/paragraph'>private/mcecchetti/accessibility/paragraph</option>
<option value='private/mcecchetti/amd/pdf-export-jpeg'>private/mcecchetti/amd/pdf-export-jpeg</option>
<option value='private/mcecchetti/bitmapcrc64'>private/mcecchetti/bitmapcrc64</option>
<option value='private/mcecchetti/bitmapcrc64-5-0'>private/mcecchetti/bitmapcrc64-5-0</option>
<option value='private/mcecchetti/calc-perf-unit-test'>private/mcecchetti/calc-perf-unit-test</option>
<option value='private/mcecchetti/calc-unit-test'>private/mcecchetti/calc-unit-test</option>
<option value='private/mcecchetti/gl-program-binary'>private/mcecchetti/gl-program-binary</option>
<option value='private/mert/wip_deepl'>private/mert/wip_deepl</option>
<option value='private/mikekaganski/multicolumn'>private/mikekaganski/multicolumn</option>
<option value='private/mmeeks/aafixes44'>private/mmeeks/aafixes44</option>
<option value='private/mmeeks/backports'>private/mmeeks/backports</option>
<option value='private/mmeeks/binarydatacache'>private/mmeeks/binarydatacache</option>
<option value='private/mmeeks/bitmapcrc64'>private/mmeeks/bitmapcrc64</option>
<option value='private/mmeeks/copy-paste'>private/mmeeks/copy-paste</option>
<option value='private/mmeeks/copypaste'>private/mmeeks/copypaste</option>
<option value='private/mmeeks/cp-6.2-bits'>private/mmeeks/cp-6.2-bits</option>
<option value='private/mmeeks/cp64merge'>private/mmeeks/cp64merge</option>
<option value='private/mmeeks/currency-dropdown'>private/mmeeks/currency-dropdown</option>
<option value='private/mmeeks/foo'>private/mmeeks/foo</option>
<option value='private/mmeeks/formula-iterator'>private/mmeeks/formula-iterator</option>
<option value='private/mmeeks/gldebug'>private/mmeeks/gldebug</option>
<option value='private/mmeeks/hidpi-bits'>private/mmeeks/hidpi-bits</option>
<option value='private/mmeeks/icontest'>private/mmeeks/icontest</option>
<option value='private/mmeeks/opengl-backbuffer'>private/mmeeks/opengl-backbuffer</option>
<option value='private/mmeeks/opengl-backbuffer2'>private/mmeeks/opengl-backbuffer2</option>
<option value='private/mmeeks/sandbox'>private/mmeeks/sandbox</option>
<option value='private/mmeeks/swapdatacontainer'>private/mmeeks/swapdatacontainer</option>
<option value='private/mmeeks/vcl-opengl3'>private/mmeeks/vcl-opengl3</option>
<option value='private/moggi/fix-opengl-context-problems'>private/moggi/fix-opengl-context-problems</option>
<option value='private/moggi/improved-dxf-xls-export'>private/moggi/improved-dxf-xls-export</option>
<option value='private/moggi/opengl-4-4-build-test'>private/moggi/opengl-4-4-build-test</option>
<option value='private/moggi/opengl-preparation'>private/moggi/opengl-preparation</option>
<option value='private/moggi/opengl-vcl-win'>private/moggi/opengl-vcl-win</option>
<option value='private/moggi/orcus-improvements'>private/moggi/orcus-improvements</option>
<option value='private/moggi/track-win-dc'>private/moggi/track-win-dc</option>
<option value='private/moggi/ui-test'>private/moggi/ui-test</option>
<option value='private/moggi/vcl-opengl3'>private/moggi/vcl-opengl3</option>
<option value='private/mst/sw_fieldmarkhide'>private/mst/sw_fieldmarkhide</option>
<option value='private/mst/sw_redlinehide'>private/mst/sw_redlinehide</option>
<option value='private/mst/sw_redlinehide_2'>private/mst/sw_redlinehide_2</option>
<option value='private/mst/sw_redlinehide_3'>private/mst/sw_redlinehide_3</option>
<option value='private/mst/sw_redlinehide_4a'>private/mst/sw_redlinehide_4a</option>
<option value='private/mst/sw_redlinehide_4b'>private/mst/sw_redlinehide_4b</option>
<option value='private/pranavk/modernize_gtktiledviewer'>private/pranavk/modernize_gtktiledviewer</option>
<option value='private/quwex/gsoc-box2d-experimental'>private/quwex/gsoc-box2d-experimental</option>
<option value='private/quwex/notespane-search'>private/quwex/notespane-search</option>
<option value='private/quwex/notespaneflat'>private/quwex/notespaneflat</option>
<option value='private/quwex/notespanesquashed'>private/quwex/notespanesquashed</option>
<option value='private/quwex/tdf59323'>private/quwex/tdf59323</option>
<option value='private/s.mehrbrodt/colorpicker-backport'>private/s.mehrbrodt/colorpicker-backport</option>
<option value='private/sweetshark/swdepend'>private/sweetshark/swdepend</option>
<option value='private/tbsdy/clipping'>private/tbsdy/clipping</option>
<option value='private/tbsdy/drawserverfontlayout'>private/tbsdy/drawserverfontlayout</option>
<option value='private/tbsdy/emf'>private/tbsdy/emf</option>
<option value='private/tbsdy/osl_getAllEnvironment'>private/tbsdy/osl_getAllEnvironment</option>
<option value='private/tbsdy/outdev'>private/tbsdy/outdev</option>
<option value='private/tbsdy/printinfomgr'>private/tbsdy/printinfomgr</option>
<option value='private/tbsdy/workbench'>private/tbsdy/workbench</option>
<option value='private/thb/libo-6-1+backports'>private/thb/libo-6-1+backports</option>
<option value='private/thb/libreoffice-5-2+backports'>private/thb/libreoffice-5-2+backports</option>
<option value='private/thb/sw_redlinehide-6-1'>private/thb/sw_redlinehide-6-1</option>
<option value='private/thb/tdf149754'>private/thb/tdf149754</option>
<option value='private/thb/wasm-upstreaming'>private/thb/wasm-upstreaming</option>
<option value='private/timar/cp-6.2-centos7'>private/timar/cp-6.2-centos7</option>
<option value='private/timar/fontconfigcrash'>private/timar/fontconfigcrash</option>
<option value='private/timar/pythonupgrademsp'>private/timar/pythonupgrademsp</option>
<option value='private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe'>private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe</option>
<option value='private/tml/android-use-bionic-linker-copy'>private/tml/android-use-bionic-linker-copy</option>
<option value='private/tml/android-use-faulty.lib'>private/tml/android-use-faulty.lib</option>
<option value='private/tml/cp-6-4-28-1'>private/tml/cp-6-4-28-1</option>
<option value='private/tml/fixwintext'>private/tml/fixwintext</option>
<option value='private/tml/iculess'>private/tml/iculess</option>
<option value='private/tml/lov-6.1.5.2'>private/tml/lov-6.1.5.2</option>
<option value='private/tml/lov-6.2.1'>private/tml/lov-6.2.1</option>
<option value='private/tml/lov-7.0.3.3'>private/tml/lov-7.0.3.3</option>
<option value='private/tml/lov-7.0.4'>private/tml/lov-7.0.4</option>
<option value='private/tml/lov-7.1.2'>private/tml/lov-7.1.2</option>
<option value='private/tml/opencl-default-1'>private/tml/opencl-default-1</option>
<option value='private/tvajngerl/staging'>private/tvajngerl/staging</option>
<option value='ref/for/distro/collabora/cp-6.2'>ref/for/distro/collabora/cp-6.2</option>
</select> <input type='submit' value='switch'/></form></td></tr>
<tr><td class='sub'>LibreOffice 核心代码仓库</td><td class='sub right'>文档基金会</td></tr></table>
<table class='tabs'><tr><td>
<a href='/cgit/lo/core/'>summary</a><a href='/cgit/lo/core/refs/?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>refs</a><a class='active' href='/cgit/lo/core/log/Makefile.fetch'>log</a><a href='/cgit/lo/core/tree/Makefile.fetch?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>tree</a><a href='/cgit/lo/core/commit/Makefile.fetch?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>commit</a><a href='/cgit/lo/core/diff/Makefile.fetch?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>diff</a></td><td class='form'><form class='right' method='get' action='/cgit/lo/core/log/Makefile.fetch'>
<input type='hidden' name='id' value='5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'/><select name='qt'>
<option value='grep'>log msg</option>
<option value='author'>author</option>
<option value='committer'>committer</option>
<option value='range'>range</option>
</select>
<input class='txt' type='search' size='10' name='q' value=''/>
<input type='submit' value='search'/>
</form>
</td></tr></table>
<div class='path'>path: <a href='/cgit/lo/core/log/?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>root</a>/<a href='/cgit/lo/core/log/Makefile.fetch?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea'>Makefile.fetch</a></div><div class='content'><table class='list nowrap'><tr class='nohover'><th class='left'>Age</th><th class='left'>Commit message (<a href='/cgit/lo/core/log/Makefile.fetch?id=5d89d64846cd9fa56ffae47aae7c8c52a2a5feea&amp;showmsg=1'>Expand</a>)</th><th class='left'>Author</th></tr>
howmsg=1'>Expand</a>)</th><th class='left'>Author</th></tr>