/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * */ #pragma once #include #include #include #include #include "document.hxx" #include namespace sc { // These values are MS compatible enum ObjectiveType { OT_MAXIMIZE = 1, OT_MINIMIZE = 2, OT_VALUE = 3 }; enum SolverParameter { SP_OBJ_CELL, // Objective cell SP_OBJ_TYPE, // Objective type (max, min, value) SP_OBJ_VAL, // Value (used when objective is of type "value") SP_VAR_CELLS, // Variable cells SP_CONSTR_COUNT, // Number of constraints (MSO only) SP_LO_ENGINE, // Engine name used in LO SP_MS_ENGINE, // Engine ID used in MSO SP_INTEGER, // Assume all variables are integer (0: no, 1: yes) // LpSolve, CoinMP and SwarmSolver SP_NON_NEGATIVE, // Assume non negativity (1: yes, 2: no) SP_EPSILON_LEVEL, // Epsilon level SP_LIMIT_BBDEPTH, // Branch and bound depth SP_TIMEOUT, // Time limit to return a solution SP_ALGORITHM, // Algorithm used by the SwarmSolver (1, 2 or 3) // Engine options common for DEPS and SCO SP_SWARM_SIZE, // Size of Swarm SP_LEARNING_CYCLES, // Learning Cycles SP_GUESS_VARIABLE_RANGE, // Variable Bounds Guessing SP_VARIABLE_RANGE_THRESHOLD, // Variable Bounds Threshold (when guessing) SP_ACR_COMPARATOR, // Use ACR Comparator (instead of BCH) SP_RND_STARTING_POINT, // Use Random starting point SP_STRONGER_PRNG, // Use a stronger random generator (slower) SP_STAGNATION_LIMIT, // Stagnation Limit SP_STAGNATION_TOLERANCE, // Stagnation Tolerance SP_ENHANCED_STATUS, // Show enhanced solver status // DEPS Options SP_AGENT_SWITCH_RATE, // Agent Switch Rate (DE Probability) SP_SCALING_MIN, // DE: Min Scaling Factor (0-1.2) SP_SCALING_MAX, // DE: Max Scaling Factor (0-1.2) SP_CROSSOVER_PROB, // DE: Crossover Probability (0-1) SP_COGNITIVE_CONST, // Cognitive Constant SP_SOCIAL_CONST, // Social Constant SP_CONSTRICTION_COEFF, // PS: Constriction Coefficient SP_MUTATION_PROB, // Mutation Probability (0-0.005) // SCO Options SP_LIBRARY_SIZE, // Size of library }; // Starts at 1 to maintain MS compatibility enum ConstraintOperator { CO_LESS_EQUAL = 1, CO_EQUAL = 2, CO_GREATER_EQUAL = 3, CO_INTEGER = 4, CO_BINARY = 5 }; // Parts of a constraint enum ConstraintPart { CP_LEFT_HAND_SIDE, CP_OPERATOR, CP_RIGHT_HAND_SIDE }; // Stores the information of a single constraint (condition) struct ModelConstraint { OUString aLeftStr; ConstraintOperator nOperator; OUString aRightStr; ModelConstraint() : nOperator(CO_LESS_EQUAL) { } bool IsDefault() const { return aLeftStr.isEmpty() && aRightStr.isEmpty() && nOperator == CO_LESS_EQUAL; } }; /* Class SolverSettings * * This class is used to load/save and manipulate solver settings in a Calc tab. * * During initialization, (see Initialize() method) all settings stored in the tab are loaded onto * the object. Settings that are not defined use default values. * * Read/Write methods are private and are used internally to load/write solver settings from * named ranges associated with the sheet. * * Get/Set methods are public methods used to change object properties (they do not save data * to the file). * * The method SaveSolverSettings() is used to create the named ranges containing the current * property values into the file. * */ class SolverSettings { private: ScTable& m_rTable; ScDocument& m_rDoc; ScDocShell* m_pDocShell; // Used to read/write the named ranges in the tab ScRangeName* m_pRangeName; OUString m_sObjCell; ObjectiveType m_eObjType; OUString m_sObjVal; OUString m_sVariableCells; OUString m_sLOEngineName; OUString m_sMSEngineId; // Solver engine options OUString m_sInteger; OUString m_sNonNegative; OUString m_sEpsilonLevel; OUString m_sLimitBBDepth; OUString m_sTimeout; OUString m_sAlgorithm; // DEPS and SCO OUString m_sSwarmSize; OUString m_sLearningCycles; OUString m_sGuessVariableRange; OUString m_sVariableRangeThreshold; OUString m_sUseACRComparator; OUString m_sUseRandomStartingPoint; OUString m_sUseStrongerPRNG; OUString m_sStagnationLimit; OUString m_sTolerance; OUString m_sEnhancedSolverStatus; // DEPS only OUString m_sAgentSwitchRate; OUString m_sScalingFactorMin; OUString m_sScalingFactorMax; OUString m_sCrossoverProbability; OUString m_sCognitiveConstant; OUString m_sSocialConstant; OUString m_sConstrictionCoeff; OUString m_sMutationProbability; OUString m_sLibrarySize; css::uno::Sequence m_aEngineOptions; std::vector m_aConstraints; void Initialize(); // Used to create or read a single solver parameter based on its named range bool ReadParamValue(SolverParameter eParam, OUString& rValue, bool bRemoveQuotes = false); bool ReadDoubleParamValue(SolverParameter eParam, OUString& rValue); void WriteParamValue(SolverParameter eParam, OUString sValue, bool bQuoted = false); void WriteDoubleParamValue(SolverParameter eParam, std::u16string_view sValue); // Creates or reads all constraints stored in named ranges void ReadConstraints(); void WriteConstraints(); // Used to create or get a single constraint part bool ReadConstraintPart(ConstraintPart ePart, tools::Long nIndex, OUString& rValue); void WriteConstraintPart(ConstraintPart ePart, tools::Long nIndex, OUString sValue); // Creates or reads all named ranges associated with solver engine options void ReadEngine(); void WriteEngine(); void DeleteAllNamedRanges(); // Maps solver parameters to named ranges std::map m_mNamedRanges = { { SP_OBJ_CELL, "solver_opt" }, { SP_OBJ_TYPE, "solver_typ" }, { SP_OBJ_VAL, "solver_val" }, { SP_VAR_CELLS, "solver_adj" }, { SP_CONSTR_COUNT, "solver_num" }, { SP_LO_ENGINE, "solver_lo_eng" }, { SP_MS_ENGINE, "solver_eng" }, { SP_INTEGER, "solver_int" }, { SP_NON_NEGATIVE, "solver_neg" }, { SP_EPSILON_LEVEL, "solver_eps" }, { SP_LIMIT_BBDEPTH, "solver_bbd" }, { SP_TIMEOUT, "solver_tim" }, { SP_ALGORITHM, "solver_alg" }, { SP_SWARM_SIZE, "solver_ssz" }, { SP_LEARNING_CYCLES, "solver_lcy" }, { SP_GUESS_VARIABLE_RANGE, "solver_gvr" }, { SP_VARIABLE_RANGE_THRESHOLD, "solver_vrt" }, { SP_ACR_COMPARATOR, "solver_acr" }, { SP_RND_STARTING_POINT, "solver_rsp" }, { SP_STRONGER_PRNG, "solver_prng" }, { SP_STAGNATION_LIMIT, "solver_slim" }, { SP_STAGNATION_TOLERANCE, "solver_stol" }, { SP_ENHANCED_STATUS, "solver_enst" }, { SP_AGENT_SWITCH_RATE, "solver_asr" }, { SP_SCALING_MIN, "solver_smin" }, { SP_SCALING_MAX, "solver_smax" }, { SP_CROSSOVER_PROB, "solver_crpb" }, { SP_COGNITIVE_CONST, "solver_cog" }, { SP_SOCIAL_CONST, "solver_soc" }, { SP_CONSTRICTION_COEFF, "solver_ccoeff" }, { SP_MUTATION_PROB, "solver_mtpb" }, { SP_LIBRARY_SIZE, "solver_lbsz" } }; // Maps LO solver implementation names to MS engine codes std::map SolverNamesToExcelEngines = { { "com.sun.star.comp.Calc.CoinMPSolver", "2" }, // Simplex LP { "com.sun.star.comp.Calc.LpsolveSolver", "2" }, // Simplex LP { "com.sun.star.comp.Calc.SwarmSolver", "1" }, // GRG Nonlinear { "com.sun.star.comp.Calc.NLPSolver.DEPSSolverImpl", "3" }, // DEPS { "com.sun.star.comp.Calc.NLPSolver.SCOSolverImpl", "3" } // SCO }; // Maps MS solver engine codes to LO solver implementation names std::map SolverCodesToLOEngines = { { "1", "com.sun.star.comp.Calc.SwarmSolver" }, // GRG Nonlinear { "2", "com.sun.star.comp.Calc.CoinMPSolver" }, // Simplex LP { "3", "com.sun.star.comp.Calc.SwarmSolver" } // Evolutionary }; // Maps LO solver parameters to named ranges to be used // NonNegative: for MS compatibility, use 1 for selected and 2 for not selected typedef std::vector> TParamInfo; std::map SolverParamNames = { { u"Integer"_ustr, { SP_INTEGER, "solver_int", "bool" } }, { u"NonNegative"_ustr, { SP_NON_NEGATIVE, "solver_neg", "bool" } }, { u"EpsilonLevel"_ustr, { SP_EPSILON_LEVEL, "solver_eps", "int" } }, { u"LimitBBDepth"_ustr, { SP_LIMIT_BBDEPTH, "solver_bbd", "bool" } }, { u"Timeout"_ustr, { SP_TIMEOUT, "solver_tim", "int" } }, { u"Algorithm"_ustr, { SP_ALGORITHM, "solver_alg", "int" } }, // SCO and DEPS { u"AssumeNonNegative"_ustr, { SP_NON_NEGATIVE, "solver_neg", "bool" } }, { u"SwarmSize"_ustr, { SP_SWARM_SIZE, "solver_ssz", "int" } }, { u"LearningCycles"_ustr, { SP_LEARNING_CYCLES, "solver_lcy", "int" } }, { u"GuessVariableRange"_ustr, { SP_GUESS_VARIABLE_RANGE, "solver_gvr", "bool" } }, { u"VariableRangeThreshold"_ustr, { SP_VARIABLE_RANGE_THRESHOLD, "solver_vrt", "double" } }, { u"UseACRComparator"_ustr, { SP_ACR_COMPARATOR, "solver_acr", "bool" } }, { u"UseRandomStartingPoint"_ustr, { SP_RND_STARTING_POINT, "solver_rsp", "bool" } }, { u"UseStrongerPRNG"_ustr, { SP_STRONGER_PRNG, "solver_prng", "bool" } }, { u"StagnationLimit"_ustr, { SP_STAGNATION_LIMIT, "solver_slim", "int" } }, { u"Tolerance"_ustr, { SP_STAGNATION_TOLERANCE, "solver_stol", "double" } }, { u"EnhancedSolverStatus"_ustr, { SP_ENHANCED_STATUS, "solver_enst", "bool" } }, // DEPS only { u"AgentSwitchRate"_ustr, { SP_AGENT_SWITCH_RATE, "solver_asr", "double" } }, { u"DEFactorMin"_ustr, { SP_SCALING_MIN, "solver_smin", "double" } }, { u"DEFactorMax"_ustr, { SP_SCALING_MAX, "solver_smax", "double" } }, { u"DECR"_ustr, { SP_CROSSOVER_PROB, "solver_crpb", "double" } }, { u"PSC1"_ustr, { SP_COGNITIVE_CONST, "solver_cog", "double" } }, { u"PSC2"_ustr, { SP_SOCIAL_CONST, "solver_soc", "double" } }, { u"PSWeight"_ustr, { SP_CONSTRICTION_COEFF, "solver_ccoeff", "double" } }, { u"PSCL"_ustr, { SP_MUTATION_PROB, "solver_mtpb", "double" } }, // SCO only { u"LibrarySize"_ustr, { SP_LIBRARY_SIZE, "solver_lbsz", "int" } } }; // Stores the roots used for named ranges of constraint parts // Items here must be in the same order as in ConstraintPart enum std::vector m_aConstraintParts{ u"solver_lhs"_ustr, u"solver_rel"_ustr, u"solver_rhs"_ustr }; public: /* A SolverSettings object is linked to the ScTable where solver parameters * are located and saved to */ SolverSettings(ScTable& pTable); SC_DLLPUBLIC OUString GetParameter(SolverParameter eParam); SC_DLLPUBLIC void SetParameter(SolverParameter eParam, OUString sValue); SC_DLLPUBLIC ObjectiveType GetObjectiveType() { return m_eObjType; } SC_DLLPUBLIC void SetObjectiveType(ObjectiveType eType); SC_DLLPUBLIC void GetEngineOptions(css::uno::Sequence& aOptions); SC_DLLPUBLIC void SetEngineOptions(css::uno::Sequence& aOptions); SC_DLLPUBLIC std::vector GetConstraints() { return m_aConstraints; } SC_DLLPUBLIC void SetConstraints(std::vector aConstraints); SC_DLLPUBLIC void SaveSolverSettings(); SC_DLLPUBLIC void ResetToDefaults(); SC_DLLPUBLIC bool TabHasSolverModel(); }; } // namespace sc /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ 36'>feature/cib_contract136 LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/README.md
AgeCommit message (Expand)Author
2020-02-20Bump macOS build baseline to Xcode 11.3 and macOS 10.14.4Stephan Bergmann
2020-02-06Self-certify LibreOffice licenses as OSI-approvedThorsten Behrens
2019-11-01README: Add Weblate badge for core l10nAdolfo Jayme Barrientos
2019-10-28Android: document one SDK version that worksMiklos Vajna
2019-08-26Android: document one NDK version that worksMiklos Vajna
2019-08-15Fix MSVC version in README.mdStephan Bergmann
2019-06-05baseline is CentOS/RHEL 7 (glibc 2.14 or later)Christian Lohmaier