/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#include <docsh.hxx>
#include <scitems.hxx>
#include <vcl/errinf.hxx>
#include <editeng/justifyitem.hxx>
#include <comphelper/classids.hxx>
#include <formula/errorcodes.hxx>
#include <vcl/msgbox.hxx>
#include <vcl/virdev.hxx>
#include <vcl/waitobj.hxx>
#include <rtl/bootstrap.hxx>
#include <svl/PasswordHelper.hxx>
#include <sfx2/app.hxx>
#include <sfx2/bindings.hxx>
#include <sfx2/dinfdlg.hxx>
#include <sfx2/docfile.hxx>
#include <sfx2/fcontnr.hxx>
#include <sfx2/objface.hxx>
#include <sfx2/viewfrm.hxx>
#include <svl/documentlockfile.hxx>
#include <svl/sharecontrolfile.hxx>
#include <svl/urihelper.hxx>
#include <osl/file.hxx>
#include <chgtrack.hxx>
#include <chgviset.hxx>
#include <com/sun/star/awt/Key.hpp>
#include <com/sun/star/awt/KeyModifier.hpp>
#include <com/sun/star/container/XContentEnumerationAccess.hpp>
#include <com/sun/star/document/UpdateDocMode.hpp>
#include <com/sun/star/script/vba/VBAEventId.hpp>
#include <com/sun/star/script/vba/XVBAEventProcessor.hpp>
#include <com/sun/star/sheet/XSpreadsheetView.hpp>
#include <com/sun/star/task/XJob.hpp>
#include <com/sun/star/ui/theModuleUIConfigurationManagerSupplier.hpp>
#include <com/sun/star/ui/XAcceleratorConfiguration.hpp>
#include <com/sun/star/util/VetoException.hpp>
#include <com/sun/star/sheet/XSpreadsheetDocument.hpp>
#include <com/sun/star/sheet/XSpreadsheet.hpp>
#include <com/sun/star/container/XIndexAccess.hpp>
#include <com/sun/star/table/XTableChartsSupplier.hpp>
#include <com/sun/star/table/XTableCharts.hpp>
#include <com/sun/star/table/XTableChart.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <com/sun/star/document/XEmbeddedObjectSupplier.hpp>
#include <com/sun/star/frame/XStorable2.hpp>
#include <com/sun/star/frame/Desktop.hpp>
#include <config_folders.h>
#include <scabstdlg.hxx>
#include <sot/formats.hxx>
#include <svx/dialogs.hrc>
#include <formulacell.hxx>
#include <postit.hxx>
#include <global.hxx>
#include <filter.hxx>
#include <scmod.hxx>
#include <tabvwsh.hxx>
#include <docfunc.hxx>
#include <imoptdlg.hxx>
#include <impex.hxx>
#include <scresid.hxx>
#include <strings.hrc>
#include <globstr.hrc>
#include <scerrors.hxx>
#include <brdcst.hxx>
#include <stlpool.hxx>
#include <autostyl.hxx>
#include <attrib.hxx>
#include <asciiopt.hxx>
#include <waitoff.hxx>
#include <docpool.hxx>
#include <progress.hxx>
#include <pntlock.hxx>
#include <docuno.hxx>
#include <appoptio.hxx>
#include <detdata.hxx>
#include <printfun.hxx>
#include <dociter.hxx>
#include <cellform.hxx>
#include <chartlis.hxx>
#include <hints.hxx>
#include <xmlwrap.hxx>
#include <drwlayer.hxx>
#include <refreshtimer.hxx>
#include <dbdata.hxx>
#include <scextopt.hxx>
#include <compiler.hxx>
#include <warnpassword.hxx>
#include <optsolver.hxx>
#include <sheetdata.hxx>
#include <tabprotection.hxx>
#include <docparam.hxx>
#include "docshimp.hxx"
#include <sizedev.hxx>
#include <refreshtimerprotector.hxx>
#include <orcus/orcus_import_ods.hpp>
#include <orcusfiltersimpl.hxx>
#include <officecfg/Office/Calc.hxx>
#include <comphelper/processfactory.hxx>
#include <comphelper/string.hxx>
#include <unotools/configmgr.hxx>
#include <uiitems.hxx>
#include <cellsuno.hxx>
#include <dpobject.hxx>
#include <markdata.hxx>
#include <optuno.hxx>
#include <orcusfilters.hxx>
#include <datastream.hxx>
#include <documentlinkmgr.hxx>
#include <refupdatecontext.hxx>
#include <memory>
#include <vector>
using namespace com::sun::star;
using ::com::sun::star::uno::Reference;
using ::com::sun::star::lang::XMultiServiceFactory;
using std::shared_ptr;
using ::std::vector;
// Filter names (like in sclib.cxx)
static const sal_Char pFilterSc50[] = "StarCalc 5.0";
static const sal_Char pFilterXML[] = "StarOffice XML (Calc)";
static const sal_Char pFilterAscii[] = "Text - txt - csv (StarCalc)";
static const sal_Char pFilterLotus[] = "Lotus";
static const sal_Char pFilterQPro6[] = "Quattro Pro 6.0";
static const sal_Char pFilterExcel4[] = "MS Excel 4.0";
static const sal_Char pFilterEx4Temp[] = "MS Excel 4.0 Vorlage/Template";
static const sal_Char pFilterExcel5[] = "MS Excel 5.0/95";
static const sal_Char pFilterEx5Temp[] = "MS Excel 5.0/95 Vorlage/Template";
static const sal_Char pFilterExcel95[] = "MS Excel 95";
static const sal_Char pFilterEx95Temp[] = "MS Excel 95 Vorlage/Template";
static const sal_Char pFilterExcel97[] = "MS Excel 97";
static const sal_Char pFilterEx97Temp[] = "MS Excel 97 Vorlage/Template";
static const sal_Char pFilterDBase[] = "dBase";
static const sal_Char pFilterDif[] = "DIF";
static const sal_Char pFilterSylk[] = "SYLK";
static const sal_Char pFilterHtml[] = "HTML (StarCalc)";
static const sal_Char pFilterHtmlWebQ[] = "calc_HTML_WebQuery";
static const sal_Char pFilterRtf[] = "Rich Text Format (StarCalc)";
#define ScDocShell
#include <scslots.hxx>
SFX_IMPL_INTERFACE(ScDocShell,SfxObjectShell)
void ScDocShell::InitInterface_Impl()
{
}
// GlobalName of the current version:
SFX_IMPL_OBJECTFACTORY( ScDocShell, SvGlobalName(SO3_SC_CLASSID), SfxObjectShellFlags::STD_NORMAL, "scalc" )
void ScDocShell::FillClass( SvGlobalName* pClassName,
SotClipboardFormatId* pFormat,
OUString* /* pAppName */,
OUString* pFullTypeName,
OUString* pShortTypeName,
sal_Int32 nFileFormat,
bool bTemplate /* = false */) const
{
if ( nFileFormat == SOFFICE_FILEFORMAT_60 )
{
*pClassName = SvGlobalName( SO3_SC_CLASSID_60 );
*pFormat = SotClipboardFormatId::STARCALC_60;
*pFullTypeName = ScResId( SCSTR_LONG_SCDOC_NAME );
*pShortTypeName = ScResId( SCSTR_SHORT_SCDOC_NAME );
}
else if ( nFileFormat == SOFFICE_FILEFORMAT_8 )
{
*pClassName = SvGlobalName( SO3_SC_CLASSID_60 );
*pFormat = bTemplate ? SotClipboardFormatId::STARCALC_8_TEMPLATE : SotClipboardFormatId::STARCALC_8;
*pFullTypeName = "calc8";
*pShortTypeName = ScResId(SCSTR_SHORT_SCDOC_NAME);
}
else
{
OSL_FAIL("Which version?");
}
}
std::set<Color> ScDocShell::GetDocColors()
{
return aDocument.GetDocColors();
}
void ScDocShell::DoEnterHandler()
{
ScTabViewShell* pViewSh = ScTabViewShell::GetActiveViewShell();
if (pViewSh)
if (pViewSh->GetViewData().GetDocShell() == this)
SC_MOD()->InputEnterHandler();
}
SCTAB ScDocShell::GetSaveTab()
{
SCTAB nTab = 0;
ScTabViewShell* pSh = GetBestViewShell();
if (pSh)
{
const ScMarkData& rMark = pSh->GetViewData().GetMarkData();
nTab = rMark.GetFirstSelected();
}
return nTab;
}
HiddenInformation ScDocShell::GetHiddenInformationState( HiddenInformation nStates )
{
// get global state like HiddenInformation::DOCUMENTVERSIONS
HiddenInformation nState = SfxObjectShell::GetHiddenInformationState( nStates );
if ( nStates & HiddenInformation::RECORDEDCHANGES )
{
if ( aDocument.GetChangeTrack() && aDocument.GetChangeTrack()->GetFirst() )
nState |= HiddenInformation::RECORDEDCHANGES;
}
if ( nStates & HiddenInformation::NOTES )
{
SCTAB nTableCount = aDocument.GetTableCount();
bool bFound = false;
for (SCTAB nTab = 0; nTab < nTableCount && !bFound; ++nTab)
{
if (aDocument.HasTabNotes(nTab)) //TODO:
bFound = true;
}
if (bFound)
nState |= HiddenInformation::NOTES;
}
return nState;
}
void ScDocShell::BeforeXMLLoading()
{
aDocument.EnableIdle(false);
// prevent unnecessary broadcasts and updates
OSL_ENSURE(pModificator == nullptr, "The Modificator should not exist");
pModificator = new ScDocShellModificator( *this );
aDocument.SetImportingXML( true );
aDocument.EnableExecuteLink( false ); // #i101304# to be safe, prevent nested loading from external references
aDocument.EnableUndo( false );
// prevent unnecessary broadcasts and "half way listeners"
aDocument.SetInsertingFromOtherDoc( true );
}
void ScDocShell::AfterXMLLoading(bool bRet)
{
if (GetCreateMode() != SfxObjectCreateMode::ORGANIZER)
{
UpdateLinks();
// don't prevent establishing of listeners anymore
aDocument.SetInsertingFromOtherDoc( false );
if ( bRet )
{
ScChartListenerCollection* pChartListener = aDocument.GetChartListenerCollection();
if (pChartListener)
pChartListener->UpdateDirtyCharts();
// #95582#; set the table names of linked tables to the new path
SCTAB nTabCount = aDocument.GetTableCount();
for (SCTAB i = 0; i < nTabCount; ++i)
{
if (aDocument.IsLinked( i ))
{
OUString aName;
aDocument.GetName(i, aName);
OUString aLinkTabName = aDocument.GetLinkTab(i);
sal_Int32 nLinkTabNameLength = aLinkTabName.getLength();
sal_Int32 nNameLength = aName.getLength();
if (nLinkTabNameLength < nNameLength)
{
// remove the quotes on begin and end of the docname and restore the escaped quotes
const sal_Unicode* pNameBuffer = aName.getStr();
if ( *pNameBuffer == '\'' && // all docnames have to have a ' character on the first pos
ScGlobal::UnicodeStrChr( pNameBuffer, SC_COMPILER_FILE_TAB_SEP ) )
{
OUStringBuffer aDocURLBuffer;
bool bQuote = true; // Document name is always quoted
++pNameBuffer;
while ( bQuote && *pNameBuffer )
{
if ( *pNameBuffer == '\'' && *(pNameBuffer-1) != '\\' )
bQuote = false;
else if( !(*pNameBuffer == '\\' && *(pNameBuffer+1) == '\'') )
aDocURLBuffer.append(*pNameBuffer); // If escaped quote: only quote in the name
++pNameBuffer;
}
if( *pNameBuffer == SC_COMPILER_FILE_TAB_SEP ) // after the last quote of the docname should be the # char
{
sal_Int32 nIndex = nNameLength - nLinkTabNameLength;
INetURLObject aINetURLObject(aDocURLBuffer.makeStringAndClear());
if(aName.match( aLinkTabName, nIndex) &&
(aName[nIndex - 1] == '#') && // before the table name should be the # char
!aINetURLObject.HasError()) // the docname should be a valid URL
{
aName = ScGlobal::GetDocTabName( aDocument.GetLinkDoc( i ), aDocument.GetLinkTab( i ) );
aDocument.RenameTab(i, aName, true/*bExternalDocument*/);
}
// else; nothing has to happen, because it is a user given name
}
// else; nothing has to happen, because it is a user given name
}
// else; nothing has to happen, because it is a user given name
}
// else; nothing has to happen, because it is a user given name
}
}
// #i94570# DataPilot table names have to be unique, or the tables can't be accessed by API.
// If no name (or an invalid name, skipped in ScXMLDataPilotTableContext::EndElement) was set, create a new name.
ScDPCollection* pDPCollection = aDocument.GetDPCollection();
if ( pDPCollection )
{
size_t nDPCount = pDPCollection->GetCount();
for (size_t nDP=0; nDP<nDPCount; ++nDP)
{
ScDPObject& rDPObj = (*pDPCollection)[nDP];
if (rDPObj.GetName().isEmpty())
rDPObj.SetName( pDPCollection->CreateNewName() );
}
}
}
}
else
aDocument.SetInsertingFromOtherDoc( false );
aDocument.SetImportingXML( false );
aDocument.EnableExecuteLink( true );
aDocument.EnableUndo( true );
bIsEmpty = false;
if (pModificator)
{
ScDocument::HardRecalcState eRecalcState = aDocument.GetHardRecalcState();
// Temporarily set hard-recalc to prevent calling
// ScFormulaCell::Notify() during destruction of the Modificator which
// will set the cells dirty.
if (eRecalcState == ScDocument::HardRecalcState::OFF)
aDocument.SetHardRecalcState(ScDocument::HardRecalcState::TEMPORARY);
delete pModificator;
pModificator = nullptr;
aDocument.SetHardRecalcState(eRecalcState);
}
else
{
OSL_FAIL("The Modificator should exist");
}
aDocument.EnableIdle(true);
}
namespace {
class LoadMediumGuard
{
public:
explicit LoadMediumGuard(ScDocument* pDoc) :
mpDoc(pDoc)
{
mpDoc->SetLoadingMedium(true);
}
~LoadMediumGuard()
{
mpDoc->SetLoadingMedium(false);
}
private:
ScDocument* mpDoc;
};
void processDataStream( ScDocShell& rShell, const sc::ImportPostProcessData& rData )
{
if (!rData.mpDataStream)
return;
const sc::ImportPostProcessData::DataStream& r = *rData.mpDataStream;
if (!r.maRange.IsValid())
return;
// Break the streamed range into the top range and the height limit. A
// height limit of 0 means unlimited i.e. the streamed data will go all
// the way to the last row.
ScRange aTopRange = r.maRange;
aTopRange.aEnd.SetRow(aTopRange.aStart.Row());
sal_Int32 nLimit = r.maRange.aEnd.Row() - r.maRange.aStart.Row() + 1;
if (r.maRange.aEnd.Row() == MAXROW)
// Unlimited range.
nLimit = 0;
sc::DataStream::MoveType eMove =
r.meInsertPos == sc::ImportPostProcessData::DataStream::InsertTop ?
sc::DataStream::MOVE_DOWN : sc::DataStream::RANGE_DOWN;
sc::DataStream* pStrm = new sc::DataStream(&rShell, r.maURL, aTopRange, nLimit, eMove, 0);
pStrm->SetRefreshOnEmptyLine(r.mbRefreshOnEmpty);
sc::DocumentLinkManager& rMgr = rShell.GetDocument().GetDocLinkManager();
rMgr.setDataStream(pStrm);
}
}
bool ScDocShell::LoadXML( SfxMedium* pLoadMedium, const css::uno::Reference< css::embed::XStorage >& xStor )
{
LoadMediumGuard aLoadGuard(&aDocument);
// MacroCallMode is no longer needed, state is kept in SfxObjectShell now
// no Seek(0) here - always loading from storage, GetInStream must not be called
BeforeXMLLoading();
ScXMLImportWrapper aImport(*this, pLoadMedium, xStor);
bool bRet = false;
ErrCode nError = ERRCODE_NONE;
aDocument.LockAdjustHeight();
if (GetCreateMode() == SfxObjectCreateMode::ORGANIZER)
bRet = aImport.Import(ImportFlags::Styles, nError);
else
bRet = aImport.Import(ImportFlags::All, nError);
if ( nError )
pLoadMedium->SetError(nError);
processDataStream(*this, aImport.GetImportPostProcessData());
//if the document was not generated by LibreOffice, do hard recalc in case some other document
//generator saved cached formula results that differ from LibreOffice's calculated results or
//did not use cached formula results.
uno::Reference<document::XDocumentPropertiesSupplier> xDPS(GetModel(), uno::UNO_QUERY_THROW);
uno::Reference<document::XDocumentProperties> xDocProps = xDPS->getDocumentProperties();
Reference<uno::XComponentContext> xContext = comphelper::getProcessComponentContext();
ScRecalcOptions nRecalcMode =
static_cast<ScRecalcOptions>(officecfg::Office::Calc::Formula::Load::ODFRecalcMode::get(xContext));
bool bHardRecalc = false;
if (nRecalcMode == RECALC_ASK)
{
OUString sProductName(utl::ConfigManager::getProductName());
if (aDocument.IsUserInteractionEnabled() && xDocProps->getGenerator().indexOf(sProductName) == -1)
{
// Generator is not LibreOffice. Ask if the user wants to perform
// full re-calculation.
ScopedVclPtrInstance<QueryBox> aBox(
GetActiveDialogParent(), MessBoxStyle::YesNo | MessBoxStyle::DefaultYes,
ScGlobal::GetRscString(STR_QUERY_FORMULA_RECALC_ONLOAD_ODS));
aBox->SetCheckBoxText(ScGlobal::GetRscString(STR_ALWAYS_PERFORM_SELECTED));
bHardRecalc = aBox->Execute() == RET_YES;
if (aBox->GetCheckBoxState())
{
// Always perform selected action in the future.
std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create());
officecfg::Office::Calc::Formula::Load::ODFRecalcMode::set(sal_Int32(0), batch);
ScFormulaOptions aOpt = SC_MOD()->GetFormulaOptions();
aOpt.SetODFRecalcOptions(bHardRecalc ? RECALC_ALWAYS : RECALC_NEVER);
/* XXX is this really supposed to set the ScModule options?
* Not the ScDocShell options? */
SC_MOD()->SetFormulaOptions(aOpt);
batch->commit();
}
}
}
else if (nRecalcMode == RECALC_ALWAYS)
bHardRecalc = true;
if (bHardRecalc)
DoHardRecalc();
else
{
// still need to recalc volatile formula cells.
aDocument.Broadcast(ScHint(SfxHintId::ScDataChanged, BCA_BRDCST_ALWAYS));
}
AfterXMLLoading(bRet);
aDocument.UnlockAdjustHeight();
return bRet;
}
bool ScDocShell::SaveXML( SfxMedium* pSaveMedium, const css::uno::Reference< css::embed::XStorage >& xStor )
{
aDocument.EnableIdle(false);
ScXMLImportWrapper aImport(*this, pSaveMedium, xStor);
bool bRet(false);
if (GetCreateMode() != SfxObjectCreateMode::ORGANIZER)
bRet = aImport.Export(false);
else
bRet = aImport.Export(true);
aDocument.EnableIdle(true);
return bRet;
}
bool ScDocShell::SaveCurrentChart( SfxMedium& rMedium )
{
bool bRet = false;
try
{
uno::Reference< lang::XComponent > xCurrentComponent = frame::Desktop::create( comphelper::getProcessComponentContext() )->getCurrentComponent();
uno::Reference< frame::XStorable2 > xStorable( xCurrentComponent, uno::UNO_QUERY_THROW );
uno::Reference< frame::XModel > xChartDoc ( xCurrentComponent, uno::UNO_QUERY_THROW );
ScXMLChartExportWrapper aExport( xChartDoc, rMedium );
bRet = aExport.Export();
}
catch(...)
{
SAL_WARN("sc", "exception thrown while saving chart. Bug!!!");
}
return bRet;
}
bool ScDocShell::Load( SfxMedium& rMedium )
{
LoadMediumGuard aLoadGuard(&aDocument);
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
// only the latin script language is loaded
// -> initialize the others from options (before loading)
InitOptions(true);
// If this is an ODF file being loaded, then by default, use legacy processing
// for tdf#99729 (if required, it will be overridden in *::ReadUserDataSequence())
if (IsOwnStorageFormat(rMedium))
{
if (aDocument.GetDrawLayer())
aDocument.GetDrawLayer()->SetAnchoredTextOverflowLegacy(true);
}
GetUndoManager()->Clear();
bool bRet = SfxObjectShell::Load(rMedium);
if (bRet)
{
comphelper::EmbeddedObjectContainer& rEmbeddedObjectContainer = getEmbeddedObjectContainer();
rEmbeddedObjectContainer.setUserAllowsLinkUpdate(false);
if (GetMedium())
{
const SfxUInt16Item* pUpdateDocItem = SfxItemSet::GetItem<SfxUInt16Item>(rMedium.GetItemSet(), SID_UPDATEDOCMODE, false);
nCanUpdate = pUpdateDocItem ? pUpdateDocItem->GetValue() : css::document::UpdateDocMode::NO_UPDATE;
}
{
// prepare a valid document for XML filter
// (for ConvertFrom, InitNew is called before)
aDocument.MakeTable(0);
aDocument.GetStyleSheetPool()->CreateStandardStyles();
aDocument.UpdStlShtPtrsFrmNms();
if (!mbUcalcTest)
{
/* Create styles that are imported through Orcus */
OUString aURL("$BRAND_BASE_DIR" LIBO_SHARE_FOLDER "/calc/styles.xml");
rtl::Bootstrap::expandMacros(aURL);
OUString aPath;
osl::FileBase::getSystemPathFromFileURL(aURL, aPath);
ScOrcusFilters* pOrcus = ScFormatFilter::Get().GetOrcusFilters();
if (pOrcus)
{
pOrcus->importODS_Styles(aDocument, aPath);
aDocument.GetStyleSheetPool()->setAllStandard();
}
}
bRet = LoadXML( &rMedium, nullptr );
}
}
if (!bRet && !rMedium.GetError())
rMedium.SetError(SVSTREAM_FILEFORMAT_ERROR);
if (rMedium.GetError())
SetError(rMedium.GetError());
InitItems();
CalcOutputFactor();
// invalidate eventually temporary table areas
if ( bRet )
aDocument.InvalidateTableArea();
bIsEmpty = false;
FinishedLoading();
return bRet;
}
void ScDocShell::Notify( SfxBroadcaster&, const SfxHint& rHint )
{
const ScTablesHint* pScHint = dynamic_cast< const ScTablesHint* >( &rHint );
if (pScHint)
{
if (pScHint->GetTablesHintId() == SC_TAB_INSERTED)
{
uno::Reference< script::vba::XVBAEventProcessor > xVbaEvents = aDocument.GetVbaEventProcessor();
if ( xVbaEvents.is() ) try
{
uno::Sequence< uno::Any > aArgs( 1 );
aArgs[0] <<= pScHint->GetTab1();
xVbaEvents->processVbaEvent( script::vba::VBAEventId::WORKBOOK_NEWSHEET, aArgs );
}
catch( uno::Exception& )
{
}
}
}
if ( dynamic_cast<const SfxStyleSheetHint*>(&rHint) ) // Template changed
NotifyStyle( static_cast<const SfxStyleSheetHint&>(rHint) );
else if ( dynamic_cast<const ScAutoStyleHint*>(&rHint) )
{
//! direct call for AutoStyles
// this is called synchronously from ScInterpreter::ScStyle,
// modifying the document must be asynchronous
// (handled by AddInitial)
const ScAutoStyleHint& rStlHint = static_cast<const ScAutoStyleHint&>(rHint);
const ScRange& aRange = rStlHint.GetRange();
const OUString& aName1 = rStlHint.GetStyle1();
const OUString& aName2 = rStlHint.GetStyle2();
sal_uInt32 nTimeout = rStlHint.GetTimeout();
if (!pAutoStyleList)
pAutoStyleList = new ScAutoStyleList(this);
pAutoStyleList->AddInitial( aRange, aName1, nTimeout, aName2 );
}
else if ( dynamic_cast<const SfxEventHint*>(&rHint) )
{
SfxEventHintId nEventId = static_cast<const SfxEventHint*>(&rHint)->GetEventId();
switch ( nEventId )
{
case SfxEventHintId::LoadFinished:
{
#if HAVE_FEATURE_MULTIUSER_ENVIRONMENT
// the readonly documents should not be opened in shared mode
if ( HasSharedXMLFlagSet() && !SC_MOD()->IsInSharedDocLoading() && !IsReadOnly() )
{
if ( SwitchToShared( true, false ) )
{
ScViewData* pViewData = GetViewData();
ScTabView* pTabView = ( pViewData ? dynamic_cast< ScTabView* >( pViewData->GetView() ) : nullptr );
if ( pTabView )
{
pTabView->UpdateLayerLocks();
}
}
else
{
// switching to shared mode has failed, the document should be opened readonly
// TODO/LATER: And error message should be shown here probably
SetReadOnlyUI();
}
}
#endif
}
break;
case SfxEventHintId::ViewCreated:
{
#if HAVE_FEATURE_MULTIUSER_ENVIRONMENT
if ( IsDocShared() && !SC_MOD()->IsInSharedDocLoading() )
{
ScAppOptions aAppOptions = SC_MOD()->GetAppOptions();
if ( aAppOptions.GetShowSharedDocumentWarning() )
{
ScopedVclPtrInstance<WarningBox> aBox( GetActiveDialogParent(), MessBoxStyle::Ok,
ScGlobal::GetRscString( STR_SHARED_DOC_WARNING ) );
aBox->SetDefaultCheckBoxText();
aBox->Execute();
bool bChecked = aBox->GetCheckBoxState();
if ( bChecked )
{
aAppOptions.SetShowSharedDocumentWarning( !bChecked );
SC_MOD()->SetAppOptions( aAppOptions );
}
}
}
#endif
try
{
uno::Reference< uno::XComponentContext > xContext(
comphelper::getProcessComponentContext() );
uno::Reference< lang::XMultiServiceFactory > xServiceManager(
xContext->getServiceManager(),
uno::UNO_QUERY_THROW );
uno::Reference< container::XContentEnumerationAccess > xEnumAccess( xServiceManager, uno::UNO_QUERY_THROW );
uno::Reference< container::XEnumeration> xEnum = xEnumAccess->createContentEnumeration(
"com.sun.star.sheet.SpreadsheetDocumentJob" );
if ( xEnum.is() )
{
while ( xEnum->hasMoreElements() )
{
uno::Any aAny = xEnum->nextElement();
uno::Reference< lang::XSingleComponentFactory > xFactory;
aAny >>= xFactory;
if ( xFactory.is() )
{
uno::Reference< task::XJob > xJob( xFactory->createInstanceWithContext( xContext ), uno::UNO_QUERY_THROW );
ScViewData* pViewData = GetViewData();
SfxViewShell* pViewShell = ( pViewData ? pViewData->GetViewShell() : nullptr );
SfxViewFrame* pViewFrame = ( pViewShell ? pViewShell->GetViewFrame() : nullptr );
SfxFrame* pFrame = ( pViewFrame ? &pViewFrame->GetFrame() : nullptr );
uno::Reference< frame::XController > xController = ( pFrame ? pFrame->GetController() : nullptr );
uno::Reference< sheet::XSpreadsheetView > xSpreadsheetView( xController, uno::UNO_QUERY_THROW );
uno::Sequence< beans::NamedValue > aArgsForJob { { "SpreadsheetView", uno::makeAny( xSpreadsheetView ) } };
xJob->execute( aArgsForJob );
}
}
}
}
catch ( uno::Exception & )
{
}
}
break;
case SfxEventHintId::SaveDoc:
{
#if HAVE_FEATURE_MULTIUSER_ENVIRONMENT
if ( IsDocShared() && !SC_MOD()->IsInSharedDocSaving() )
{
bool bSuccess = false;
bool bRetry = true;
while ( bRetry )
{
bRetry = false;
uno::Reference< frame::XModel > xModel;
try
{
// load shared file
xModel.set( LoadSharedDocument(), uno::UNO_QUERY_THROW );
uno::Reference< util::XCloseable > xCloseable( xModel, uno::UNO_QUERY_THROW );
// check if shared flag is set in shared file
bool bShared = false;
ScModelObj* pDocObj = ScModelObj::getImplementation( xModel );
ScDocShell* pSharedDocShell = ( pDocObj ? dynamic_cast< ScDocShell* >( pDocObj->GetObjectShell() ) : nullptr );
if ( pSharedDocShell )
{
bShared = pSharedDocShell->HasSharedXMLFlagSet();
}
// #i87870# check if shared status was disabled and enabled again
bool bOwnEntry = false;
bool bEntriesNotAccessible = false;
try
{
::svt::ShareControlFile aControlFile( GetSharedFileURL() );
bOwnEntry = aControlFile.HasOwnEntry();
}
catch ( uno::Exception& )
{
bEntriesNotAccessible = true;
}
if ( bShared && bOwnEntry )
{
uno::Reference< frame::XStorable > xStorable( xModel, uno::UNO_QUERY_THROW );
if ( xStorable->isReadonly() )
{
xCloseable->close( true );
OUString aUserName( ScGlobal::GetRscString( STR_UNKNOWN_USER ) );
bool bNoLockAccess = false;
try
{
::svt::DocumentLockFile aLockFile( GetSharedFileURL() );
LockFileEntry aData = aLockFile.GetLockData();
if ( !aData[LockFileComponent::OOOUSERNAME].isEmpty() )
{
aUserName = aData[LockFileComponent::OOOUSERNAME];
}
else if ( !aData[LockFileComponent::SYSUSERNAME].isEmpty() )
{
aUserName = aData[LockFileComponent::SYSUSERNAME];
}
}
catch ( uno::Exception& )
{
bNoLockAccess = true;
}
if ( bNoLockAccess )
{
// TODO/LATER: in future an error regarding impossibility to open file for writing could be shown
ErrorHandler::HandleError( ERRCODE_IO_GENERAL );
}
else
{
OUString aMessage( ScGlobal::GetRscString( STR_FILE_LOCKED_SAVE_LATER ) );
aMessage = aMessage.replaceFirst( "%1", aUserName );
ScopedVclPtrInstance< WarningBox > aBox( GetActiveDialogParent(), MessBoxStyle::RetryCancel | MessBoxStyle::DefaultRetry, aMessage );
if ( aBox->Execute() == RET_RETRY )
{
bRetry = true;
}
}
}
else
{
// merge changes from shared file into temp file
bool bSaveToShared = false;
if ( pSharedDocShell )
{
bSaveToShared = MergeSharedDocument( pSharedDocShell );
}
// close shared file
xCloseable->close( true );
// TODO: keep file lock on shared file
// store to shared file
if ( bSaveToShared )
{
bool bChangedViewSettings = false;
ScChangeViewSettings* pChangeViewSet = aDocument.GetChangeViewSettings();
if ( pChangeViewSet && pChangeViewSet->ShowChanges() )
{
pChangeViewSet->SetShowChanges( false );
pChangeViewSet->SetShowAccepted( false );
aDocument.SetChangeViewSettings( *pChangeViewSet );
bChangedViewSettings = true;
}
uno::Reference< frame::XStorable > xStor( GetModel(), uno::UNO_QUERY_THROW );
// TODO/LATER: More entries from the MediaDescriptor might be interesting for the merge
uno::Sequence< beans::PropertyValue > aValues(1);
aValues[0].Name = "FilterName";
aValues[0].Value <<= GetMedium()->GetFilter()->GetFilterName();
const SfxStringItem* pPasswordItem = SfxItemSet::GetItem<SfxStringItem>(GetMedium()->GetItemSet(), SID_PASSWORD, false);
if ( pPasswordItem && !pPasswordItem->GetValue().isEmpty() )
{
aValues.realloc( 2 );
aValues[1].Name = "Password";
aValues[1].Value <<= pPasswordItem->GetValue();
}
SC_MOD()->SetInSharedDocSaving( true );
xStor->storeToURL( GetSharedFileURL(), aValues );
SC_MOD()->SetInSharedDocSaving( false );
if ( bChangedViewSettings )
{
pChangeViewSet->SetShowChanges( true );
pChangeViewSet->SetShowAccepted( true );
aDocument.SetChangeViewSettings( *pChangeViewSet );
}
}
bSuccess = true;
GetUndoManager()->Clear();
}
}
else
{
xCloseable->close( true );
if ( bEntriesNotAccessible )
{
// TODO/LATER: in future an error regarding impossibility to write to share control file could be shown
ErrorHandler::HandleError( ERRCODE_IO_GENERAL );
}
else
{
ScopedVclPtrInstance<WarningBox> aBox( GetActiveDialogParent(), MessBoxStyle::Ok,
ScGlobal::GetRscString( STR_DOC_NOLONGERSHARED ) );
aBox->Execute();
SfxBindings* pBindings = GetViewBindings();
if ( pBindings )
{
pBindings->ExecuteSynchron( SID_SAVEASDOC );
}
}
}
}
catch ( uno::Exception& )
{
OSL_FAIL( "SfxEventHintId::SaveDoc: caught exception" );
SC_MOD()->SetInSharedDocSaving( false );
try
{
uno::Reference< util::XCloseable > xClose( xModel, uno::UNO_QUERY_THROW );
xClose->close( true );
}
catch ( uno::Exception& )
{
}
}
}
if ( !bSuccess )
SetError(ERRCODE_IO_ABORT); // this error code will produce no error message, but will break the further saving process
}
#endif
if (pSheetSaveData)
pSheetSaveData->SetInSupportedSave(true);
}
break;
case SfxEventHintId::SaveAsDoc:
{
if ( GetDocument().GetExternalRefManager()->containsUnsavedReferences() )
{
ScopedVclPtrInstance<WarningBox> aBox( GetActiveDialogParent(), MessBoxStyle::YesNo,
ScGlobal::GetRscString( STR_UNSAVED_EXT_REF ) );
if( RET_NO == aBox->Execute())
{
SetError(ERRCODE_IO_ABORT); // this error code will produce no error message, but will break the further saving process
}
}
SAL_FALLTHROUGH;
}
case SfxEventHintId::SaveToDoc:
// #i108978# If no event is sent before saving, there will also be no "...DONE" event,
// and SAVE/SAVEAS can't be distinguished from SAVETO. So stream copying is only enabled
// if there is a SAVE/SAVEAS/SAVETO event first.
if (pSheetSaveData)
pSheetSaveData->SetInSupportedSave(true);
break;
case SfxEventHintId::SaveDocDone:
case SfxEventHintId::SaveAsDocDone:
{
// new positions are used after "save" and "save as", but not "save to"
UseSheetSaveEntries(); // use positions from saved file for next saving
SAL_FALLTHROUGH;
}
case SfxEventHintId::SaveToDocDone:
// only reset the flag, don't use the new positions
if (pSheetSaveData)
pSheetSaveData->SetInSupportedSave(false);
break;
default:
{
}
break;
}
}
else if (rHint.GetId() == SfxHintId::TitleChanged) // Without parameter
{
aDocument.SetName( SfxShell::GetName() );
// RegisterNewTargetNames doesn't exist any longer
SfxGetpApp()->Broadcast(SfxHint( SfxHintId::ScDocNameChanged )); // Navigator
}
}
// Load contents for organizer
bool ScDocShell::LoadFrom( SfxMedium& rMedium )
{
LoadMediumGuard aLoadGuard(&aDocument);
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
WaitObject aWait( GetActiveDialogParent() );
bool bRet = false;
if (GetMedium())
{
const SfxUInt16Item* pUpdateDocItem = SfxItemSet::GetItem<SfxUInt16Item>(rMedium.GetItemSet(), SID_UPDATEDOCMODE, false);
nCanUpdate = pUpdateDocItem ? pUpdateDocItem->GetValue() : css::document::UpdateDocMode::NO_UPDATE;
}
// until loading/saving only the styles in XML is implemented,
// load the whole file
bRet = LoadXML( &rMedium, nullptr );
InitItems();
SfxObjectShell::LoadFrom( rMedium );
return bRet;
}
static void lcl_parseHtmlFilterOption(const OUString& rOption, LanguageType& rLang, bool& rDateConvert)
{
OUStringBuffer aBuf;
std::vector< OUString > aTokens;
sal_Int32 n = rOption.getLength();
const sal_Unicode* p = rOption.getStr();
for (sal_Int32 i = 0; i < n; ++i)
{
const sal_Unicode c = p[i];
if (c == ' ')
{
if (!aBuf.isEmpty())
aTokens.push_back( aBuf.makeStringAndClear() );
}
else
aBuf.append(c);
}
if (!aBuf.isEmpty())
aTokens.push_back( aBuf.makeStringAndClear() );
rLang = LanguageType( 0 );
rDateConvert = false;
if (aTokens.size() > 0)
rLang = static_cast<LanguageType>(aTokens[0].toInt32());
if (aTokens.size() > 1)
rDateConvert = static_cast<bool>(aTokens[1].toInt32());
}
bool ScDocShell::ConvertFrom( SfxMedium& rMedium )
{
LoadMediumGuard aLoadGuard(&aDocument);
bool bRet = false; // sal_False means user quit!
// On error: Set error at stream
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
GetUndoManager()->Clear();
// Set optimal col width after import?
bool bSetColWidths = false;
bool bSetSimpleTextColWidths = false;
std::map<SCCOL, ScColWidthParam> aColWidthParam;
ScRange aColWidthRange;
// Set optimal row height after import?
bool bSetRowHeights = false;
vector<ScDocRowHeightUpdater::TabRanges> aRecalcRowRangesArray;
// All filters need the complete file in one piece (not asynchronously)
// So make sure that we transfer the whole file with CreateFileStream
rMedium.GetPhysicalName(); //! Call CreateFileStream directly, if available
const SfxUInt16Item* pUpdateDocItem = SfxItemSet::GetItem<SfxUInt16Item>(rMedium.GetItemSet(), SID_UPDATEDOCMODE, false);
nCanUpdate = pUpdateDocItem ? pUpdateDocItem->GetValue() : css::document::UpdateDocMode::NO_UPDATE;
std::shared_ptr<const SfxFilter> pFilter = rMedium.GetFilter();
if (pFilter)
{
OUString aFltName = pFilter->GetFilterName();
bool bCalc3 = aFltName == "StarCalc 3.0";
bool bCalc4 = aFltName == "StarCalc 4.0";
if (!bCalc3 && !bCalc4)
aDocument.SetInsertingFromOtherDoc( true );
if (aFltName == pFilterXML)
bRet = LoadXML( &rMedium, nullptr );
else if (aFltName == pFilterLotus)
{
OUString sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sItStr = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if (sItStr.isEmpty())
{
// default for lotus import (from API without options):
// IBM_437 encoding
sItStr = ScGlobal::GetCharsetString( RTL_TEXTENCODING_IBM_437 );
}
ErrCode eError = ScFormatFilter::Get().ScImportLotus123( rMedium, &aDocument,
ScGlobal::GetCharsetValue(sItStr));
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
if( eError.IsWarning() )
bRet = true;
}
else
bRet = true;
bSetColWidths = true;
bSetRowHeights = true;
}
else if ( aFltName == pFilterExcel4 || aFltName == pFilterExcel5 ||
aFltName == pFilterExcel95 || aFltName == pFilterExcel97 ||
aFltName == pFilterEx4Temp || aFltName == pFilterEx5Temp ||
aFltName == pFilterEx95Temp || aFltName == pFilterEx97Temp )
{
EXCIMPFORMAT eFormat = EIF_AUTO;
if ( aFltName == pFilterExcel4 || aFltName == pFilterEx4Temp )
eFormat = EIF_BIFF_LE4;
else if ( aFltName == pFilterExcel5 || aFltName == pFilterExcel95 ||
aFltName == pFilterEx5Temp || aFltName == pFilterEx95Temp )
eFormat = EIF_BIFF5;
else if ( aFltName == pFilterExcel97 || aFltName == pFilterEx97Temp )
eFormat = EIF_BIFF8;
MakeDrawLayer(); //! In the filter
CalcOutputFactor(); // prepare update of row height
ErrCode eError = ScFormatFilter::Get().ScImportExcel( rMedium, &aDocument, eFormat );
aDocument.UpdateFontCharSet();
if ( aDocument.IsChartListenerCollectionNeedsUpdate() )
aDocument.UpdateChartListenerCollection(); //! For all imports?
// all graphics objects must have names
aDocument.EnsureGraphicNames();
if (eError == SCWARN_IMPORT_RANGE_OVERFLOW)
{
if (!GetError())
SetError(eError);
bRet = true;
}
else if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
}
else
bRet = true;
}
else if (aFltName == "Gnumeric Spreadsheet")
{
ScOrcusFilters* pOrcus = ScFormatFilter::Get().GetOrcusFilters();
if (!pOrcus)
return false;
bRet = pOrcus->importGnumeric(aDocument, rMedium);
}
else if (aFltName == pFilterAscii)
{
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
ScAsciiOptions aOptions;
bool bOptInit = false;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
aOptions.ReadFromString( static_cast<const SfxStringItem*>(pItem)->GetValue() );
bOptInit = true;
}
if ( !bOptInit )
{
// default for ascii import (from API without options):
// ISO8859-1/MS_1252 encoding, comma, double quotes
aOptions.SetCharSet( RTL_TEXTENCODING_MS_1252 );
aOptions.SetFieldSeps( OUString(',') );
aOptions.SetTextSep( '"' );
}
ErrCode eError = ERRCODE_NONE;
bool bOverflowRow, bOverflowCol, bOverflowCell;
bOverflowRow = bOverflowCol = bOverflowCell = false;
if( ! rMedium.IsStorage() )
{
ScImportExport aImpEx( &aDocument );
aImpEx.SetExtOptions( aOptions );
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->SetStreamCharSet( aOptions.GetCharSet() );
pInStream->Seek( 0 );
bRet = aImpEx.ImportStream( *pInStream, rMedium.GetBaseURL(), SotClipboardFormatId::STRING );
eError = bRet ? ERRCODE_NONE : SCERR_IMPORT_CONNECT;
aDocument.StartAllListeners();
sc::SetFormulaDirtyContext aCxt;
aDocument.SetAllFormulasDirty(aCxt);
// The same resulting name has to be handled in
// ScExternalRefCache::initializeDoc() and related, hence
// pass 'true' for RenameTab()'s bExternalDocument for a
// composed name so ValidTabName() will not be checked,
// which could veto the rename in case it contained
// characters that Excel does not handle. If we wanted to
// change that then it needed to be handled in all
// corresponding places of the external references
// manager/cache. Likely then we'd also need a method to
// compose a name excluding such characters.
aDocument.RenameTab( 0, INetURLObject( rMedium.GetName()).GetBase(), true/*bExternalDocument*/);
bOverflowRow = aImpEx.IsOverflowRow();
bOverflowCol = aImpEx.IsOverflowCol();
bOverflowCell = aImpEx.IsOverflowCell();
}
else
{
OSL_FAIL( "No Stream" );
}
}
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
}
else if (!GetError() && (bOverflowRow || bOverflowCol || bOverflowCell))
{
// precedence: row, column, cell
ErrCode nWarn = (bOverflowRow ? SCWARN_IMPORT_ROW_OVERFLOW :
(bOverflowCol ? SCWARN_IMPORT_COLUMN_OVERFLOW :
SCWARN_IMPORT_CELL_OVERFLOW));
SetError(nWarn);
}
bSetColWidths = true;
bSetSimpleTextColWidths = true;
}
else if (aFltName == pFilterDBase)
{
OUString sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sItStr = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if (sItStr.isEmpty())
{
// default for dBase import (from API without options):
// IBM_850 encoding
sItStr = ScGlobal::GetCharsetString( RTL_TEXTENCODING_IBM_850 );
}
ScDocRowHeightUpdater::TabRanges aRecalcRanges(0);
ErrCode eError = DBaseImport( rMedium.GetPhysicalName(),
ScGlobal::GetCharsetValue(sItStr), aColWidthParam, *aRecalcRanges.mpRanges );
aRecalcRowRangesArray.push_back(aRecalcRanges);
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
bRet = ( eError == SCWARN_IMPORT_RANGE_OVERFLOW );
}
else
bRet = true;
aColWidthRange.aStart.SetRow( 1 ); // Except for the column header
bSetColWidths = true;
bSetSimpleTextColWidths = true;
}
else if (aFltName == pFilterDif)
{
SvStream* pStream = rMedium.GetInStream();
if (pStream)
{
ErrCode eError;
OUString sItStr;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sItStr = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if (sItStr.isEmpty())
{
// default for DIF import (from API without options):
// ISO8859-1/MS_1252 encoding
sItStr = ScGlobal::GetCharsetString( RTL_TEXTENCODING_MS_1252 );
}
eError = ScFormatFilter::Get().ScImportDif( *pStream, &aDocument, ScAddress(0,0,0),
ScGlobal::GetCharsetValue(sItStr));
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
if( eError.IsWarning() )
bRet = true;
}
else
bRet = true;
}
bSetColWidths = true;
bSetSimpleTextColWidths = true;
bSetRowHeights = true;
}
else if (aFltName == pFilterSylk)
{
ErrCode eError = SCERR_IMPORT_UNKNOWN;
bool bOverflowRow, bOverflowCol, bOverflowCell;
bOverflowRow = bOverflowCol = bOverflowCell = false;
if( !rMedium.IsStorage() )
{
ScImportExport aImpEx( &aDocument );
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->Seek( 0 );
bRet = aImpEx.ImportStream( *pInStream, rMedium.GetBaseURL(), SotClipboardFormatId::SYLK );
eError = bRet ? ERRCODE_NONE : SCERR_IMPORT_UNKNOWN;
aDocument.StartAllListeners();
sc::SetFormulaDirtyContext aCxt;
aDocument.SetAllFormulasDirty(aCxt);
bOverflowRow = aImpEx.IsOverflowRow();
bOverflowCol = aImpEx.IsOverflowCol();
bOverflowCell = aImpEx.IsOverflowCell();
}
else
{
OSL_FAIL( "No Stream" );
}
}
if ( eError != ERRCODE_NONE && !GetError() )
SetError(eError);
else if (!GetError() && (bOverflowRow || bOverflowCol || bOverflowCell))
{
// precedence: row, column, cell
ErrCode nWarn = (bOverflowRow ? SCWARN_IMPORT_ROW_OVERFLOW :
(bOverflowCol ? SCWARN_IMPORT_COLUMN_OVERFLOW :
SCWARN_IMPORT_CELL_OVERFLOW));
SetError(nWarn);
}
bSetColWidths = true;
bSetSimpleTextColWidths = true;
bSetRowHeights = true;
}
else if (aFltName == pFilterQPro6)
{
ErrCode eError = ScFormatFilter::Get().ScImportQuattroPro(rMedium.GetInStream(), &aDocument);
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
if( eError.IsWarning() )
bRet = true;
}
else
bRet = true;
// TODO: Filter should set column widths. Not doing it here, it may
// result in very narrow or wide columns, depending on content.
// Setting row heights makes cells with font size attribution or
// wrapping enabled look nicer..
bSetRowHeights = true;
}
else if (aFltName == pFilterRtf)
{
ErrCode eError = SCERR_IMPORT_UNKNOWN;
if( !rMedium.IsStorage() )
{
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
pInStream->Seek( 0 );
ScRange aRange;
eError = ScFormatFilter::Get().ScImportRTF( *pInStream, rMedium.GetBaseURL(), &aDocument, aRange );
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
if( eError.IsWarning() )
bRet = true;
}
else
bRet = true;
aDocument.StartAllListeners();
sc::SetFormulaDirtyContext aCxt;
aDocument.SetAllFormulasDirty(aCxt);
bSetColWidths = true;
bSetRowHeights = true;
}
else
{
OSL_FAIL( "No Stream" );
}
}
if ( eError != ERRCODE_NONE && !GetError() )
SetError(eError);
}
else if (aFltName == pFilterHtml || aFltName == pFilterHtmlWebQ)
{
ErrCode eError = SCERR_IMPORT_UNKNOWN;
bool bWebQuery = aFltName == pFilterHtmlWebQ;
if( !rMedium.IsStorage() )
{
SvStream* pInStream = rMedium.GetInStream();
if (pInStream)
{
LanguageType eLang = LANGUAGE_SYSTEM;
bool bDateConvert = false;
SfxItemSet* pSet = rMedium.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
OUString aFilterOption = static_cast<const SfxStringItem*>(pItem)->GetValue();
lcl_parseHtmlFilterOption(aFilterOption, eLang, bDateConvert);
}
pInStream->Seek( 0 );
ScRange aRange;
// HTML does its own ColWidth/RowHeight
CalcOutputFactor();
SvNumberFormatter aNumFormatter( comphelper::getProcessComponentContext(), eLang);
eError = ScFormatFilter::Get().ScImportHTML( *pInStream, rMedium.GetBaseURL(), &aDocument, aRange,
GetOutputFactor(), !bWebQuery, &aNumFormatter, bDateConvert );
if (eError != ERRCODE_NONE)
{
if (!GetError())
SetError(eError);
if( eError.IsWarning() )
bRet = true;
}
else
bRet = true;
aDocument.StartAllListeners();
sc::SetFormulaDirtyContext aCxt;
aDocument.SetAllFormulasDirty(aCxt);
}
else
{
OSL_FAIL( "No Stream" );
}
}
if ( eError != ERRCODE_NONE && !GetError() )
SetError(eError);
}
else
{
if (!GetError())
{
SAL_WARN("sc.filter", "No match for filter '" << aFltName << "' in ConvertFrom");
SetError(SCERR_IMPORT_NI);
}
}
if (!bCalc3)
aDocument.SetInsertingFromOtherDoc( false );
}
else
{
OSL_FAIL("No Filter in ConvertFrom");
}
InitItems();
CalcOutputFactor();
if ( bRet && (bSetColWidths || bSetRowHeights) )
{ // Adjust column width/row height; base 100% zoom
Fraction aZoom( 1, 1 );
double nPPTX = ScGlobal::nScreenPPTX * (double) aZoom / GetOutputFactor(); // Factor is printer display ratio
double nPPTY = ScGlobal::nScreenPPTY * (double) aZoom;
ScopedVclPtrInstance< VirtualDevice > pVirtDev;
// all sheets (for Excel import)
SCTAB nTabCount = aDocument.GetTableCount();
for (SCTAB nTab=0; nTab<nTabCount; nTab++)
{
SCCOL nEndCol;
SCROW nEndRow;
aDocument.GetCellArea( nTab, nEndCol, nEndRow );
aColWidthRange.aEnd.SetCol( nEndCol );
aColWidthRange.aEnd.SetRow( nEndRow );
ScMarkData aMark;
aMark.SetMarkArea( aColWidthRange );
aMark.MarkToMulti();
// Order is important: First width, then height
if ( bSetColWidths )
{
for ( SCCOL nCol=0; nCol <= nEndCol; nCol++ )
{
if (!bSetSimpleTextColWidths)
aColWidthParam[nCol].mbSimpleText = false;
sal_uInt16 nWidth = aDocument.GetOptimalColWidth(
nCol, nTab, pVirtDev, nPPTX, nPPTY, aZoom, aZoom, false, &aMark,
&aColWidthParam[nCol] );
aDocument.SetColWidth( nCol, nTab,
nWidth + (sal_uInt16)ScGlobal::nLastColWidthExtra );
}
}
}
if (bSetRowHeights)
{
// Update all rows in all tables.
ScSizeDeviceProvider aProv(this);
ScDocRowHeightUpdater aUpdater(aDocument, aProv.GetDevice(), aProv.GetPPTX(), aProv.GetPPTY(), nullptr);
aUpdater.update();
}
else if (!aRecalcRowRangesArray.empty())
{
// Update only specified row ranges for better performance.
ScSizeDeviceProvider aProv(this);
ScDocRowHeightUpdater aUpdater(aDocument, aProv.GetDevice(), aProv.GetPPTX(), aProv.GetPPTY(), &aRecalcRowRangesArray);
aUpdater.update();
}
}
FinishedLoading();
// invalidate eventually temporary table areas
if ( bRet )
aDocument.InvalidateTableArea();
bIsEmpty = false;
return bRet;
}
bool ScDocShell::LoadExternal( SfxMedium& rMed )
{
std::shared_ptr<const SfxFilter> pFilter = rMed.GetFilter();
if (!pFilter)
return false;
if (pFilter->GetProviderName() == "orcus")
{
ScOrcusFilters* pOrcus = ScFormatFilter::Get().GetOrcusFilters();
if (!pOrcus)
return false;
const OUString& rFilterName = pFilter->GetName();
if (rFilterName == "gnumeric")
{
if (!pOrcus->importGnumeric(aDocument, rMed))
return false;
}
else if (rFilterName == "csv")
{
if (!pOrcus->importCSV(aDocument, rMed))
return false;
}
else if (rFilterName == "xlsx")
{
if (!pOrcus->importXLSX(aDocument, rMed))
return false;
}
else if (rFilterName == "ods")
{
if (!pOrcus->importODS(aDocument, rMed))
return false;
}
FinishedLoading();
return true;
}
return false;
}
ScDocShell::PrepareSaveGuard::PrepareSaveGuard( ScDocShell& rDocShell )
: mrDocShell( rDocShell)
{
// DoEnterHandler not here (because of AutoSave), is in ExecuteSave.
ScChartListenerCollection* pCharts = mrDocShell.aDocument.GetChartListenerCollection();
if (pCharts)
pCharts->UpdateDirtyCharts(); // Charts to be updated.
mrDocShell.aDocument.StopTemporaryChartLock();
if (mrDocShell.pAutoStyleList)
mrDocShell.pAutoStyleList->ExecuteAllNow(); // Execute template timeouts now.
if (mrDocShell.aDocument.HasExternalRefManager())
{
ScExternalRefManager* pRefMgr = mrDocShell.aDocument.GetExternalRefManager();
if (pRefMgr && pRefMgr->hasExternalData())
{
pRefMgr->setAllCacheTableReferencedStati( false);
mrDocShell.aDocument.MarkUsedExternalReferences(); // Mark tables of external references to be written.
}
}
if (mrDocShell.GetCreateMode()== SfxObjectCreateMode::STANDARD)
mrDocShell.SfxObjectShell::SetVisArea( tools::Rectangle() ); // "Normally" worked on => no VisArea.
}
ScDocShell::PrepareSaveGuard::~PrepareSaveGuard()
{
if (mrDocShell.aDocument.HasExternalRefManager())
{
ScExternalRefManager* pRefMgr = mrDocShell.aDocument.GetExternalRefManager();
if (pRefMgr && pRefMgr->hasExternalData())
{
// Prevent accidental data loss due to lack of knowledge.
pRefMgr->setAllCacheTableReferencedStati( true);
}
}
}
bool ScDocShell::Save()
{
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
PrepareSaveGuard aPrepareGuard( *this);
SfxViewFrame* pFrame1 = SfxViewFrame::GetFirst( this );
if (pFrame1)
{
vcl::Window* pWindow = &pFrame1->GetWindow();
if ( pWindow )
{
vcl::Window* pSysWin = pWindow->GetSystemWindow();
if ( pSysWin )
{
pSysWin->SetAccessibleName(OUString());
}
}
}
// wait cursor is handled with progress bar
bool bRet = SfxObjectShell::Save();
if( bRet )
bRet = SaveXML( GetMedium(), nullptr );
return bRet;
}
namespace {
/**
* Remove the file name from the full path, to keep only the directory path.
*/
void popFileName(OUString& rPath)
{
if (!rPath.isEmpty())
{
INetURLObject aURLObj(rPath);
aURLObj.removeSegment();
rPath = aURLObj.GetMainURL(INetURLObject::DecodeMechanism::NONE);
}
}
}
bool ScDocShell::SaveAs( SfxMedium& rMedium )
{
OUString aCurPath; // empty for new document that hasn't been saved.
const SfxMedium* pCurMedium = GetMedium();
if (pCurMedium)
{
aCurPath = pCurMedium->GetName();
popFileName(aCurPath);
}
if (!aCurPath.isEmpty())
{
// current document has a path -> not a brand-new document.
OUString aNewPath = rMedium.GetName();
popFileName(aNewPath);
OUString aRel = URIHelper::simpleNormalizedMakeRelative(aCurPath, aNewPath);
if (!aRel.isEmpty())
{
// Directory path will change before and after the save.
aDocument.InvalidateStreamOnSave();
}
}
ScTabViewShell* pViewShell = GetBestViewShell();
bool bNeedsRehash = ScPassHashHelper::needsPassHashRegen(aDocument, PASSHASH_SHA1);
if (bNeedsRehash)
// legacy xls hash double-hashed by SHA1 is also supported.
bNeedsRehash = ScPassHashHelper::needsPassHashRegen(aDocument, PASSHASH_XL, PASSHASH_SHA1);
if (pViewShell && bNeedsRehash)
{
if (!pViewShell->ExecuteRetypePassDlg(PASSHASH_SHA1))
// password re-type cancelled. Don't save the document.
return false;
}
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
PrepareSaveGuard aPrepareGuard( *this);
OUString aFltName = rMedium.GetFilter()->GetFilterName();
bool bChartExport = aFltName.indexOf("chart8") != -1;
// wait cursor is handled with progress bar
bool bRet = false;
if(!bChartExport)
{
bRet = SfxObjectShell::SaveAs( rMedium );
if (bRet)
bRet = SaveXML( &rMedium, nullptr );
}
else
{
bRet = SaveCurrentChart( rMedium );
}
return bRet;
}
namespace {
// Xcl-like column width measured in characters of standard font.
sal_Int32 lcl_ScDocShell_GetColWidthInChars( sal_uInt16 nWidth )
{
double f = nWidth;
f *= 1328.0 / 25.0;
f += 90.0;
f *= 1.0 / 23.0;
f /= 256.0;
return sal_Int32( f );
}
void lcl_ScDocShell_GetFixedWidthString( OUString& rStr, const ScDocument& rDoc,
SCTAB nTab, SCCOL nCol, bool bValue, SvxCellHorJustify eHorJust )
{
OUString aString = rStr;
sal_Int32 nLen = lcl_ScDocShell_GetColWidthInChars(
rDoc.GetColWidth( nCol, nTab ) );
//If the text won't fit in the column
if ( nLen < aString.getLength() )
{
OUStringBuffer aReplacement;
if (bValue)
aReplacement.append("###");
else
aReplacement.append(aString);
//truncate to the number of characters that should fit, even in the
//bValue case nLen might be < len ###
aString = comphelper::string::truncateToLength(aReplacement, nLen).makeStringAndClear();
}
if ( nLen > aString.getLength() )
{
if ( bValue && eHorJust == SvxCellHorJustify::Standard )
eHorJust = SvxCellHorJustify::Right;
sal_Int32 nBlanks = nLen - aString.getLength();
switch ( eHorJust )
{
case SvxCellHorJustify::Right:
{
OUStringBuffer aTmp;
aTmp = comphelper::string::padToLength( aTmp, nBlanks, ' ' );
aString = aTmp.append(aString).makeStringAndClear();
}
break;
case SvxCellHorJustify::Center:
{
sal_Int32 nLeftPad = nBlanks / 2;
OUStringBuffer aTmp;
comphelper::string::padToLength( aTmp, nLeftPad, ' ' );
aTmp.append(aString);
comphelper::string::padToLength( aTmp, nLen, ' ' );
aString = aTmp.makeStringAndClear();
}
break;
default:
{
OUStringBuffer aTmp(aString);
comphelper::string::padToLength( aTmp, nLen, ' ' );
aString = aTmp.makeStringAndClear();
}
}
}
rStr = aString;
}
void lcl_ScDocShell_WriteEmptyFixedWidthString( SvStream& rStream,
const ScDocument& rDoc, SCTAB nTab, SCCOL nCol )
{
OUString aString;
lcl_ScDocShell_GetFixedWidthString( aString, rDoc, nTab, nCol, false,
SvxCellHorJustify::Standard );
rStream.WriteUnicodeOrByteText( aString );
}
template<typename StrT, typename SepCharT>
sal_Int32 getTextSepPos(
const StrT& rStr, const ScImportOptions& rAsciiOpt, const SepCharT& rTextSep, const SepCharT& rFieldSep, bool& rNeedQuotes)
{
// #i116636# quotes are needed if text delimiter (quote), field delimiter,
// or LF or CR is in the cell text.
sal_Int32 nPos = rStr.indexOf(rTextSep);
rNeedQuotes = rAsciiOpt.bQuoteAllText || (nPos >= 0) ||
(rStr.indexOf(rFieldSep) >= 0) ||
(rStr.indexOf('\n') >= 0) ||
(rStr.indexOf('\r') >= 0);
return nPos;
}
template<typename StrT, typename StrBufT>
void escapeTextSep(sal_Int32 nPos, const StrT& rStrDelim, StrT& rStr)
{
while (nPos >= 0)
{
StrBufT aBuf(rStr);
aBuf.insert(nPos, rStrDelim);
rStr = aBuf.makeStringAndClear();
nPos = rStr.indexOf(rStrDelim, nPos+1+rStrDelim.getLength());
}
}
}
void ScDocShell::AsciiSave( SvStream& rStream, const ScImportOptions& rAsciiOpt )
{
sal_Unicode cDelim = rAsciiOpt.nFieldSepCode;
sal_Unicode cStrDelim = rAsciiOpt.nTextSepCode;
rtl_TextEncoding eCharSet = rAsciiOpt.eCharSet;
bool bFixedWidth = rAsciiOpt.bFixedWidth;
bool bSaveAsShown = rAsciiOpt.bSaveAsShown;
bool bShowFormulas = rAsciiOpt.bSaveFormulas;
rtl_TextEncoding eOldCharSet = rStream.GetStreamCharSet();
rStream.SetStreamCharSet( eCharSet );
SvStreamEndian nOldNumberFormatInt = rStream.GetEndian();
OString aStrDelimEncoded; // only used if not Unicode
OUString aStrDelimDecoded; // only used if context encoding
OString aDelimEncoded;
OUString aDelimDecoded;
bool bContextOrNotAsciiEncoding;
if ( eCharSet == RTL_TEXTENCODING_UNICODE )
{
rStream.StartWritingUnicodeText();
bContextOrNotAsciiEncoding = false;
}
else
{
aStrDelimEncoded = OString(&cStrDelim, 1, eCharSet);
aDelimEncoded = OString(&cDelim, 1, eCharSet);
rtl_TextEncodingInfo aInfo;
aInfo.StructSize = sizeof(aInfo);
if ( rtl_getTextEncodingInfo( eCharSet, &aInfo ) )
{
bContextOrNotAsciiEncoding =
(((aInfo.Flags & RTL_TEXTENCODING_INFO_CONTEXT) != 0) ||
((aInfo.Flags & RTL_TEXTENCODING_INFO_ASCII) == 0));
if ( bContextOrNotAsciiEncoding )
{
aStrDelimDecoded = OStringToOUString(aStrDelimEncoded, eCharSet);
aDelimDecoded = OStringToOUString(aDelimEncoded, eCharSet);
}
}
else
bContextOrNotAsciiEncoding = false;
}
SCCOL nStartCol = 0;
SCROW nStartRow = 0;
SCTAB nTab = GetSaveTab();
SCCOL nEndCol;
SCROW nEndRow;
aDocument.GetCellArea( nTab, nEndCol, nEndRow );
ScProgress aProgress( this, ScGlobal::GetRscString( STR_SAVE_DOC ), nEndRow, true );
OUString aString;
bool bTabProtect = aDocument.IsTabProtected( nTab );
SCCOL nCol;
SCROW nRow;
SCCOL nNextCol = nStartCol;
SCROW nNextRow = nStartRow;
SCCOL nEmptyCol;
SCROW nEmptyRow;
SvNumberFormatter& rFormatter = *aDocument.GetFormatTable();
ScHorizontalCellIterator aIter( &aDocument, nTab, nStartCol, nStartRow,
nEndCol, nEndRow );
ScRefCellValue* pCell;
while ( ( pCell = aIter.GetNext( nCol, nRow ) ) != nullptr )
{
bool bProgress = false; // only upon line change
if ( nNextRow < nRow )
{ // empty rows or/and empty columns up to end of row
bProgress = true;
for ( nEmptyCol = nNextCol; nEmptyCol < nEndCol; nEmptyCol++ )
{ // remaining columns of last row
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
endlub( rStream );
nNextRow++;
for ( nEmptyRow = nNextRow; nEmptyRow < nRow; nEmptyRow++ )
{ // completely empty rows
for ( nEmptyCol = nStartCol; nEmptyCol < nEndCol; nEmptyCol++ )
{
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
endlub( rStream );
}
for ( nEmptyCol = nStartCol; nEmptyCol < nCol; nEmptyCol++ )
{ // empty columns at beginning of row
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
nNextRow = nRow;
}
else if ( nNextCol < nCol )
{ // empty columns in same row
for ( nEmptyCol = nNextCol; nEmptyCol < nCol; nEmptyCol++ )
{ // columns in between
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
}
if ( nCol == nEndCol )
{
bProgress = true;
nNextCol = nStartCol;
nNextRow = nRow + 1;
}
else
nNextCol = nCol + 1;
CellType eType = pCell->meType;
ScAddress aPos(nCol, nRow, nTab);
if ( bTabProtect )
{
const ScProtectionAttr* pProtAttr =
static_cast<const ScProtectionAttr*>( aDocument.GetAttr(
nCol, nRow, nTab, ATTR_PROTECTION ));
if ( pProtAttr->GetHideCell() ||
( eType == CELLTYPE_FORMULA && bShowFormulas &&
pProtAttr->GetHideFormula() ) )
eType = CELLTYPE_NONE; // hide
}
bool bString;
switch ( eType )
{
case CELLTYPE_NONE:
aString.clear();
bString = false;
break;
case CELLTYPE_FORMULA :
{
FormulaError nErrCode;
if ( bShowFormulas )
{
pCell->mpFormula->GetFormula(aString);
bString = true;
}
else if ((nErrCode = pCell->mpFormula->GetErrCode()) != FormulaError::NONE)
{
aString = ScGlobal::GetErrorString( nErrCode );
bString = true;
}
else if (pCell->mpFormula->IsValue())
{
sal_uInt32 nFormat = aDocument.GetNumberFormat(aPos);
if ( bFixedWidth || bSaveAsShown )
{
Color* pDummy;
ScCellFormat::GetString(*pCell, nFormat, aString, &pDummy, rFormatter, &aDocument);
bString = bSaveAsShown && rFormatter.IsTextFormat( nFormat);
}
else
{
ScCellFormat::GetInputString(*pCell, nFormat, aString, rFormatter, &aDocument);
bString = false;
}
}
else
{
if ( bSaveAsShown )
{
sal_uInt32 nFormat = aDocument.GetNumberFormat(aPos);
Color* pDummy;
ScCellFormat::GetString(*pCell, nFormat, aString, &pDummy, rFormatter, &aDocument);
}
else
aString = pCell->mpFormula->GetString().getString();
bString = true;
}
}
break;
case CELLTYPE_STRING :
if ( bSaveAsShown )
{
sal_uInt32 nFormat = aDocument.GetNumberFormat(aPos);
Color* pDummy;
ScCellFormat::GetString(*pCell, nFormat, aString, &pDummy, rFormatter, &aDocument);
}
else
aString = pCell->mpString->getString();
bString = true;
break;
case CELLTYPE_EDIT :
{
const EditTextObject* pObj = pCell->mpEditText;
EditEngine& rEngine = aDocument.GetEditEngine();
rEngine.SetText( *pObj);
aString = rEngine.GetText(); // including LF
bString = true;
}
break;
case CELLTYPE_VALUE :
{
sal_uInt32 nFormat;
aDocument.GetNumberFormat( nCol, nRow, nTab, nFormat );
if ( bFixedWidth || bSaveAsShown )
{
Color* pDummy;
ScCellFormat::GetString(*pCell, nFormat, aString, &pDummy, rFormatter, &aDocument);
bString = bSaveAsShown && rFormatter.IsTextFormat( nFormat);
}
else
{
ScCellFormat::GetInputString(*pCell, nFormat, aString, rFormatter, &aDocument);
bString = false;
}
}
break;
default:
OSL_FAIL( "ScDocShell::AsciiSave: unknown CellType" );
aString.clear();
bString = false;
}
if ( bFixedWidth )
{
SvxCellHorJustify eHorJust =
static_cast<const SvxHorJustifyItem*>( aDocument.GetAttr( nCol, nRow,
nTab, ATTR_HOR_JUSTIFY ))->GetValue();
lcl_ScDocShell_GetFixedWidthString( aString, aDocument, nTab, nCol,
!bString, eHorJust );
rStream.WriteUnicodeOrByteText( aString );
}
else
{
OUString aUniString = aString;// TODO: remove that later
if (!bString && cStrDelim != 0 && !aUniString.isEmpty())
{
sal_Unicode c = aUniString[0];
bString = (c == cStrDelim || c == ' ' ||
aUniString.endsWith(" ") ||
aUniString.indexOf(cStrDelim) >= 0);
if (!bString && cDelim != 0)
bString = (aUniString.indexOf(cDelim) >= 0);
}
if ( bString )
{
if ( cStrDelim != 0 ) //@ BugId 55355
{
if ( eCharSet == RTL_TEXTENCODING_UNICODE )
{
bool bNeedQuotes = false;
sal_Int32 nPos = getTextSepPos(
aUniString, rAsciiOpt, cStrDelim, cDelim, bNeedQuotes);
escapeTextSep<OUString, OUStringBuffer>(
nPos, OUString(cStrDelim), aUniString);
if ( bNeedQuotes )
rStream.WriteUniOrByteChar( cStrDelim, eCharSet );
write_uInt16s_FromOUString(rStream, aUniString);
if ( bNeedQuotes )
rStream.WriteUniOrByteChar( cStrDelim, eCharSet );
}
else
{
// This is nasty. The Unicode to byte encoding
// may convert typographical quotation marks to ASCII
// quotation marks, which may interfer with the delimiter,
// so we have to escape delimiters after the string has
// been encoded. Since this may happen also with UTF-8
// encoded typographical quotation marks if such was
// specified as a delimiter we have to check for the full
// encoded delimiter string, not just one character.
// Now for RTL_TEXTENCODING_ISO_2022_... and similar brain
// dead encodings where one code point (and especially a
// low ASCII value) may represent different characters, we
// have to convert forth and back and forth again. Same for
// UTF-7 since it is a context sensitive encoding too.
if ( bContextOrNotAsciiEncoding )
{
// to byte encoding
OString aStrEnc = OUStringToOString(aUniString, eCharSet);
// back to Unicode
OUString aStrDec = OStringToOUString(aStrEnc, eCharSet);
// search on re-decoded string
bool bNeedQuotes = false;
sal_Int32 nPos = getTextSepPos(
aStrDec, rAsciiOpt, aStrDelimDecoded, aDelimDecoded, bNeedQuotes);
escapeTextSep<OUString, OUStringBuffer>(
nPos, aStrDelimDecoded, aStrDec);
// write byte re-encoded
if ( bNeedQuotes )
rStream.WriteUniOrByteChar( cStrDelim, eCharSet );
rStream.WriteUnicodeOrByteText( aStrDec, eCharSet );
if ( bNeedQuotes )
rStream.WriteUniOrByteChar( cStrDelim, eCharSet );
}
else
{
OString aStrEnc = OUStringToOString(aUniString, eCharSet);
// search on encoded string
bool bNeedQuotes = false;
sal_Int32 nPos = getTextSepPos(
aStrEnc, rAsciiOpt, aStrDelimEncoded, aDelimEncoded, bNeedQuotes);
escapeTextSep<OString, OStringBuffer>(
nPos, aStrDelimEncoded, aStrEnc);
// write byte encoded
if ( bNeedQuotes )
rStream.WriteBytes(
aStrDelimEncoded.getStr(), aStrDelimEncoded.getLength());
rStream.WriteBytes(aStrEnc.getStr(), aStrEnc.getLength());
if ( bNeedQuotes )
rStream.WriteBytes(
aStrDelimEncoded.getStr(), aStrDelimEncoded.getLength());
}
}
}
else
rStream.WriteUnicodeOrByteText( aUniString );
}
else
rStream.WriteUnicodeOrByteText( aUniString );
}
if( nCol < nEndCol )
{
if(cDelim!=0) //@ BugId 55355
rStream.WriteUniOrByteChar( cDelim );
}
else
endlub( rStream );
if ( bProgress )
aProgress.SetStateOnPercent( nRow );
}
// write out empty if requested
if ( nNextRow <= nEndRow )
{
for ( nEmptyCol = nNextCol; nEmptyCol < nEndCol; nEmptyCol++ )
{ // remaining empty columns of last row
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
endlub( rStream );
nNextRow++;
}
for ( nEmptyRow = nNextRow; nEmptyRow <= nEndRow; nEmptyRow++ )
{ // entire empty rows
for ( nEmptyCol = nStartCol; nEmptyCol < nEndCol; nEmptyCol++ )
{
if ( bFixedWidth )
lcl_ScDocShell_WriteEmptyFixedWidthString( rStream,
aDocument, nTab, nEmptyCol );
else if ( cDelim != 0 )
rStream.WriteUniOrByteChar( cDelim );
}
endlub( rStream );
}
rStream.SetStreamCharSet( eOldCharSet );
rStream.SetEndian( nOldNumberFormatInt );
}
bool ScDocShell::ConvertTo( SfxMedium &rMed )
{
ScRefreshTimerProtector aProt( aDocument.GetRefreshTimerControlAddress() );
// #i6500# don't call DoEnterHandler here (doesn't work with AutoSave),
// it's already in ExecuteSave (as for Save and SaveAs)
if (pAutoStyleList)
pAutoStyleList->ExecuteAllNow(); // Execute template timeouts now
if (GetCreateMode()== SfxObjectCreateMode::STANDARD)
SfxObjectShell::SetVisArea( tools::Rectangle() ); // Edited normally -> no VisArea
OSL_ENSURE( rMed.GetFilter(), "Filter == 0" );
bool bRet = false;
OUString aFltName = rMed.GetFilter()->GetFilterName();
if (aFltName == pFilterXML)
{
//TODO/LATER: this shouldn't happen!
OSL_FAIL("XML filter in ConvertFrom?!");
bRet = SaveXML( &rMed, nullptr );
}
else if (aFltName == pFilterExcel5 || aFltName == pFilterExcel95 ||
aFltName == pFilterExcel97 || aFltName == pFilterEx5Temp ||
aFltName == pFilterEx95Temp || aFltName == pFilterEx97Temp)
{
WaitObject aWait( GetActiveDialogParent() );
bool bDoSave = true;
if( ScTabViewShell* pViewShell = GetBestViewShell() )
{
ScExtDocOptions* pExtDocOpt = aDocument.GetExtDocOptions();
if( !pExtDocOpt )
aDocument.SetExtDocOptions( pExtDocOpt = new ScExtDocOptions );
pViewShell->GetViewData().WriteExtOptions( *pExtDocOpt );
/* #i104990# If the imported document contains a medium
password, determine if we can save it, otherwise ask the users
whether they want to save without it. */
if( (rMed.GetFilter()->GetFilterFlags() & SfxFilterFlags::ENCRYPTION) == SfxFilterFlags::NONE )
{
SfxItemSet* pItemSet = rMed.GetItemSet();
const SfxPoolItem* pItem = nullptr;
if( pItemSet && pItemSet->GetItemState( SID_PASSWORD, true, &pItem ) == SfxItemState::SET )
{
bDoSave = ScWarnPassword::WarningOnPassword( rMed );
// #i42858# remove password from medium (warn only one time)
if( bDoSave )
pItemSet->ClearItem( SID_PASSWORD );
}
}
if( bDoSave )
{
bool bNeedRetypePassDlg = ScPassHashHelper::needsPassHashRegen( aDocument, PASSHASH_XL );
bDoSave = !bNeedRetypePassDlg || pViewShell->ExecuteRetypePassDlg( PASSHASH_XL );
}
}
if( bDoSave )
{
ExportFormatExcel eFormat = ExpBiff5;
if( aFltName == pFilterExcel97 || aFltName == pFilterEx97Temp )
eFormat = ExpBiff8;
ErrCode eError = ScFormatFilter::Get().ScExportExcel5( rMed, &aDocument, eFormat, RTL_TEXTENCODING_MS_1252 );
if( eError && !GetError() )
SetError(eError);
// don't return false for warnings
bRet = eError.IsWarning() || (eError == ERRCODE_NONE);
}
else
{
// export aborted, i.e. "Save without password" warning
SetError(ERRCODE_ABORT);
}
}
else if (aFltName == pFilterAscii)
{
SvStream* pStream = rMed.GetOutStream();
if (pStream)
{
OUString sItStr;
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sItStr = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if ( sItStr.isEmpty() )
{
// default for ascii export (from API without options):
// ISO8859-1/MS_1252 encoding, comma, double quotes
ScImportOptions aDefOptions( ',', '"', RTL_TEXTENCODING_MS_1252 );
sItStr = aDefOptions.BuildString();
}
WaitObject aWait( GetActiveDialogParent() );
ScImportOptions aOptions( sItStr );
AsciiSave( *pStream, aOptions );
bRet = true;
if (aDocument.GetTableCount() > 1)
if (!rMed.GetError())
rMed.SetError(SCWARN_EXPORT_ASCII);
}
}
else if (aFltName == pFilterDBase)
{
OUString sCharSet;
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sCharSet = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if (sCharSet.isEmpty())
{
// default for dBase export (from API without options):
// IBM_850 encoding
sCharSet = ScGlobal::GetCharsetString( RTL_TEXTENCODING_IBM_850 );
}
WaitObject aWait( GetActiveDialogParent() );
// FIXME: Hack so that the Sba opened TempFile can be overwritten
rMed.CloseOutStream();
bool bHasMemo = false;
ErrCode eError = DBaseExport(
rMed.GetPhysicalName(), ScGlobal::GetCharsetValue(sCharSet), bHasMemo);
if ( eError != ERRCODE_NONE && eError.IsWarning() )
{
eError = ERRCODE_NONE;
}
INetURLObject aTmpFile( rMed.GetPhysicalName(), INetProtocol::File );
if ( bHasMemo )
aTmpFile.setExtension("dbt");
if ( eError != ERRCODE_NONE )
{
if (!GetError())
SetError(eError);
if ( bHasMemo && IsDocument( aTmpFile ) )
KillFile( aTmpFile );
}
else
{
bRet = true;
if ( bHasMemo )
{
const SfxStringItem* pNameItem = rMed.GetItemSet()->GetItem<SfxStringItem>( SID_FILE_NAME );
INetURLObject aDbtFile( pNameItem->GetValue(), INetProtocol::File );
aDbtFile.setExtension("dbt");
// tdf#40713: don't lose dbt file
// if aDbtFile corresponds exactly to aTmpFile, we just have to return
if (aDbtFile.GetMainURL( INetURLObject::DecodeMechanism::Unambiguous ) == aTmpFile.GetMainURL( INetURLObject::DecodeMechanism::Unambiguous ))
return bRet;
if ( IsDocument( aDbtFile ) && !KillFile( aDbtFile ) )
bRet = false;
if ( bRet && !MoveFile( aTmpFile, aDbtFile ) )
bRet = false;
if ( !bRet )
{
KillFile( aTmpFile );
if ( !GetError() )
SetError(SCERR_EXPORT_DATA);
}
}
}
}
else if (aFltName == pFilterDif)
{
SvStream* pStream = rMed.GetOutStream();
if (pStream)
{
OUString sItStr;
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
if ( pSet && SfxItemState::SET ==
pSet->GetItemState( SID_FILE_FILTEROPTIONS, true, &pItem ) )
{
sItStr = static_cast<const SfxStringItem*>(pItem)->GetValue();
}
if (sItStr.isEmpty())
{
// default for DIF export (from API without options):
// ISO8859-1/MS_1252 encoding
sItStr = ScGlobal::GetCharsetString( RTL_TEXTENCODING_MS_1252 );
}
WaitObject aWait( GetActiveDialogParent() );
ScFormatFilter::Get().ScExportDif( *pStream, &aDocument, ScAddress(0,0,0),
ScGlobal::GetCharsetValue(sItStr) );
bRet = true;
if (aDocument.GetTableCount() > 1)
if (!rMed.GetError())
rMed.SetError(SCWARN_EXPORT_ASCII);
}
}
else if (aFltName == pFilterSylk)
{
SvStream* pStream = rMed.GetOutStream();
if ( pStream )
{
WaitObject aWait( GetActiveDialogParent() );
SCCOL nEndCol;
SCROW nEndRow;
aDocument.GetCellArea( 0, nEndCol, nEndRow );
ScRange aRange( 0,0,0, nEndCol,nEndRow,0 );
ScImportExport aImExport( &aDocument, aRange );
aImExport.SetFormulas( true );
bRet = aImExport.ExportStream( *pStream, rMed.GetBaseURL( true ), SotClipboardFormatId::SYLK );
}
}
else if (aFltName == pFilterHtml)
{
SvStream* pStream = rMed.GetOutStream();
if ( pStream )
{
SfxItemSet* pSet = rMed.GetItemSet();
const SfxPoolItem* pItem;
OUString sFilterOptions;
if (pSet->GetItemState(SID_FILE_FILTEROPTIONS, true, &pItem) == SfxItemState::SET)
sFilterOptions = static_cast<const SfxStringItem*>(pItem)->GetValue();
WaitObject aWait(GetActiveDialogParent());
ScImportExport aImExport(&aDocument);
aImExport.SetStreamPath(rMed.GetName());
aImExport.SetFilterOptions(sFilterOptions);
bRet = aImExport.ExportStream(*pStream, rMed.GetBaseURL(true), SotClipboardFormatId::HTML);
if (bRet && !aImExport.GetNonConvertibleChars().isEmpty())
{
SetError(*new StringErrorInfo(
SCWARN_EXPORT_NONCONVERTIBLE_CHARS,
aImExport.GetNonConvertibleChars(),
DialogMask::ButtonsOk | DialogMask::MessageInfo));
}
}
}
else
{
if (GetError())
SetError(SCERR_IMPORT_NI);
}
return bRet;
}
bool ScDocShell::DoSaveCompleted( SfxMedium * pNewStor, bool bRegisterRecent )
{
bool bRet = SfxObjectShell::DoSaveCompleted( pNewStor, bRegisterRecent );
// SfxHintId::ScDocSaved for change ReadOnly -> Read/Write
Broadcast( SfxHint( SfxHintId::ScDocSaved ) );
return bRet;
}
bool ScDocShell::QuerySlotExecutable( sal_uInt16 nSlotId )
{
// #i112634# ask VBA event handlers whether to save or print the document
using namespace ::com::sun::star::script::vba;
sal_Int32 nVbaEventId = VBAEventId::NO_EVENT;
uno::Sequence< uno::Any > aArgs;
switch( nSlotId )
{
case SID_SAVEDOC:
case SID_SAVEASDOC:
nVbaEventId = VBAEventId::WORKBOOK_BEFORESAVE;
aArgs.realloc( 1 );
aArgs[ 0 ] <<= (nSlotId == SID_SAVEASDOC);
break;
case SID_PRINTDOC:
case SID_PRINTDOCDIRECT:
nVbaEventId = VBAEventId::WORKBOOK_BEFOREPRINT;
break;
}
bool bSlotExecutable = true;
if( nVbaEventId != VBAEventId::NO_EVENT ) try
{
uno::Reference< XVBAEventProcessor > xEventProcessor( aDocument.GetVbaEventProcessor(), uno::UNO_QUERY_THROW );
xEventProcessor->processVbaEvent( nVbaEventId, aArgs );
}
catch( util::VetoException& )
{
bSlotExecutable = false;
}
catch( uno::Exception& )
{
}
return bSlotExecutable;
}
bool ScDocShell::PrepareClose( bool bUI )
{
if(SC_MOD()->GetCurRefDlgId()>0)
{
SfxViewFrame* pFrame = SfxViewFrame::GetFirst( this );
if( pFrame )
{
SfxViewShell* p = pFrame->GetViewShell();
ScTabViewShell* pViewSh = dynamic_cast< ScTabViewShell *>( p );
if(pViewSh!=nullptr)
{
vcl::Window *pWin=pViewSh->GetWindow();
if(pWin!=nullptr) pWin->GrabFocus();
}
}
return false;
}
if ( aDocument.IsInLinkUpdate() || aDocument.IsInInterpreter() )
{
ErrorMessage(STR_CLOSE_ERROR_LINK);
return false;
}
DoEnterHandler();
// start 'Workbook_BeforeClose' VBA event handler for possible veto
if( !IsInPrepareClose() )
{
try
{
uno::Reference< script::vba::XVBAEventProcessor > xVbaEvents( aDocument.GetVbaEventProcessor(), uno::UNO_SET_THROW );
uno::Sequence< uno::Any > aArgs;
xVbaEvents->processVbaEvent( script::vba::VBAEventId::WORKBOOK_BEFORECLOSE, aArgs );
}
catch( util::VetoException& )
{
// if event processor throws VetoException, macro has vetoed close
return false;
}
catch( uno::Exception& )
{
}
}
// end handler code
bool bRet = SfxObjectShell::PrepareClose( bUI );
if (bRet) // true == close
aDocument.EnableIdle(false); // Do not mess around with it anymore!
return bRet;
}
void ScDocShell::PrepareReload()
{
SfxObjectShell::PrepareReload(); // FIXME: Doesn't do a thing?
// The Disconnect of DDE Links can trigger a Reschedule.
// If the DDE Links are not deleted before the Document dtor,
// the DDE Link Update for this Document can be triggered from this Reschedule on Reload.
// This causes a hang.
//
// Thus: Disconnect the DDE Links of the old Document before Reload
aDocument.GetDocLinkManager().disconnectDdeLinks();
}
OUString ScDocShell::GetOwnFilterName()
{
return OUString(pFilterSc50);
}
OUString ScDocShell::GetHtmlFilterName()
{
return OUString(pFilterHtml);
}
OUString ScDocShell::GetWebQueryFilterName()
{
return OUString(pFilterHtmlWebQ);
}
OUString ScDocShell::GetAsciiFilterName()
{
return OUString(pFilterAscii);
}
OUString ScDocShell::GetLotusFilterName()
{
return OUString(pFilterLotus);
}
OUString ScDocShell::GetDBaseFilterName()
{
return OUString(pFilterDBase);
}
OUString ScDocShell::GetDifFilterName()
{
return OUString(pFilterDif);
}
bool ScDocShell::HasAutomaticTableName( const OUString& rFilter )
{
// sal_True for those filters that keep the default table name
// (which is language specific)
return rFilter == pFilterAscii
|| rFilter == pFilterLotus
|| rFilter == pFilterExcel4
|| rFilter == pFilterEx4Temp
|| rFilter == pFilterDBase
|| rFilter == pFilterDif
|| rFilter == pFilterSylk
|| rFilter == pFilterHtml
|| rFilter == pFilterRtf;
}
ScDocFunc *ScDocShell::CreateDocFunc()
{
return new ScDocFuncDirect( *this );
}
ScDocShell::ScDocShell( const ScDocShell& rShell ) :
SvRefBase(),
SotObject(),
SfxObjectShell( rShell.GetCreateMode() ),
SfxListener(),
aDocument ( SCDOCMODE_DOCUMENT, this ),
aDdeTextFmt(OUString("TEXT")),
nPrtToScreenFactor( 1.0 ),
pImpl ( new DocShell_Impl ),
bHeaderOn ( true ),
bFooterOn ( true ),
bIsEmpty ( true ),
bIsInUndo ( false ),
bDocumentModifiedPending( false ),
bUpdateEnabled ( true ),
mbUcalcTest(rShell.mbUcalcTest),
nDocumentLock ( 0 ),
nCanUpdate (css::document::UpdateDocMode::ACCORDING_TO_CONFIG),
pOldAutoDBRange ( nullptr ),
pAutoStyleList ( nullptr ),
pPaintLockData ( nullptr ),
pSolverSaveData ( nullptr ),
pSheetSaveData ( nullptr ),
mpFormatSaveData( nullptr ),
pModificator ( nullptr )
{
SetPool( &SC_MOD()->GetPool() );
bIsInplace = rShell.bIsInplace;
pDocFunc = CreateDocFunc();
// SetBaseModel needs exception handling
ScModelObj::CreateAndSet( this );
StartListening(*this);
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
StartListening(*pStlPool);
GetPageOnFromPageStyleSet( nullptr, 0, bHeaderOn, bFooterOn );
// InitItems and CalcOutputFactor are called now in Load/ConvertFrom/InitNew
}
ScDocShell::ScDocShell( const SfxModelFlags i_nSfxCreationFlags ) :
SfxObjectShell( i_nSfxCreationFlags ),
aDocument ( SCDOCMODE_DOCUMENT, this ),
aDdeTextFmt(OUString("TEXT")),
nPrtToScreenFactor( 1.0 ),
pImpl ( new DocShell_Impl ),
bHeaderOn ( true ),
bFooterOn ( true ),
bIsEmpty ( true ),
bIsInUndo ( false ),
bDocumentModifiedPending( false ),
bUpdateEnabled ( true ),
mbUcalcTest ( false ),
nDocumentLock ( 0 ),
nCanUpdate (css::document::UpdateDocMode::ACCORDING_TO_CONFIG),
pOldAutoDBRange ( nullptr ),
pAutoStyleList ( nullptr ),
pPaintLockData ( nullptr ),
pSolverSaveData ( nullptr ),
pSheetSaveData ( nullptr ),
mpFormatSaveData( nullptr ),
pModificator ( nullptr )
{
SetPool( &SC_MOD()->GetPool() );
bIsInplace = (GetCreateMode() == SfxObjectCreateMode::EMBEDDED);
// Will be reset if not in place
pDocFunc = CreateDocFunc();
// SetBaseModel needs exception handling
ScModelObj::CreateAndSet( this );
StartListening(*this);
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
StartListening(*pStlPool);
aDocument.GetDBCollection()->SetRefreshHandler(
LINK( this, ScDocShell, RefreshDBDataHdl ) );
// InitItems and CalcOutputFactor are called now in Load/ConvertFrom/InitNew
}
ScDocShell::~ScDocShell()
{
ResetDrawObjectShell(); // If the Drawing Layer still tries to access it, access it
SfxStyleSheetPool* pStlPool = aDocument.GetStyleSheetPool();
if (pStlPool)
EndListening(*pStlPool);
EndListening(*this);
delete pAutoStyleList;
SfxApplication *pSfxApp = SfxGetpApp();
if ( pSfxApp->GetDdeService() ) // Delete DDE for Document
pSfxApp->RemoveDdeTopic( this );
delete pDocFunc;
delete aDocument.mpUndoManager;
aDocument.mpUndoManager = nullptr;
delete pImpl;
delete pPaintLockData;
delete pSolverSaveData;
delete pSheetSaveData;
delete mpFormatSaveData;
delete pOldAutoDBRange;
if (pModificator)
{
OSL_FAIL("The Modificator should not exist");
delete pModificator;
}
}
::svl::IUndoManager* ScDocShell::GetUndoManager()
{
return aDocument.GetUndoManager();
}
void ScDocShell::SetModified( bool bModified )
{
if ( SfxObjectShell::IsEnableSetModified() )
{
SfxObjectShell::SetModified( bModified );
Broadcast( SfxHint( SfxHintId::DocChanged ) );
}
}
void ScDocShell::SetDocumentModified()
{
// BroadcastUno must also happen right away with pPaintLockData
// FIXME: Also for SetDrawModified, if Drawing is connected
// FIXME: Then own Hint?
if ( pPaintLockData )
{
// #i115009# broadcast BCA_BRDCST_ALWAYS, so a component can read recalculated results
// of RecalcModeAlways formulas (like OFFSET) after modifying cells
aDocument.Broadcast(ScHint(SfxHintId::ScDataChanged, BCA_BRDCST_ALWAYS));
aDocument.InvalidateTableArea(); // #i105279# needed here
aDocument.BroadcastUno( SfxHint( SfxHintId::DataChanged ) );
pPaintLockData->SetModified(); // Later on ...
return;
}
SetDrawModified();
if ( aDocument.IsAutoCalcShellDisabled() )
SetDocumentModifiedPending( true );
else
{
SetDocumentModifiedPending( false );
aDocument.InvalidateStyleSheetUsage();
aDocument.InvalidateTableArea();
aDocument.InvalidateLastTableOpParams();
aDocument.Broadcast(ScHint(SfxHintId::ScDataChanged, BCA_BRDCST_ALWAYS));
if ( aDocument.IsForcedFormulaPending() && aDocument.GetAutoCalc() )
aDocument.CalcFormulaTree( true );
aDocument.RefreshDirtyTableColumnNames();
PostDataChanged();
// Detective AutoUpdate:
// Update if formulas were modified (DetectiveDirty) or the list contains
// "Trace Error" entries (Trace Error can look completely different
// after changes to non-formula cells).
ScDetOpList* pList = aDocument.GetDetOpList();
if ( pList && ( aDocument.IsDetectiveDirty() || pList->HasAddError() ) &&
pList->Count() && !IsInUndo() && SC_MOD()->GetAppOptions().GetDetectiveAuto() )
{
GetDocFunc().DetectiveRefresh(true); // sal_True = caused by automatic update
}
aDocument.SetDetectiveDirty(false); // always reset, also if not refreshed
}
// notify UNO objects after BCA_BRDCST_ALWAYS etc.
aDocument.BroadcastUno( SfxHint( SfxHintId::DataChanged ) );
}
/**
* SetDrawModified - without Formula update
*
* Drawing also needs to be updated for the normal SetDocumentModified
* e.g.: when deleting tables etc.
*/
void ScDocShell::SetDrawModified()
{
bool bUpdate = !IsModified();
SetModified();
SfxBindings* pBindings = GetViewBindings();
if (bUpdate)
{
if (pBindings)
{
pBindings->Invalidate( SID_SAVEDOC );
pBindings->Invalidate( SID_DOC_MODIFIED );
}
}
if (pBindings)
{
// #i105960# Undo etc used to be volatile.
// They always have to be invalidated, including drawing layer or row height changes
// (but not while pPaintLockData is set).
pBindings->Invalidate( SID_UNDO );
pBindings->Invalidate( SID_REDO );
pBindings->Invalidate( SID_REPEAT );
}
if ( aDocument.IsChartListenerCollectionNeedsUpdate() )
{
aDocument.UpdateChartListenerCollection();
SfxGetpApp()->Broadcast(SfxHint( SfxHintId::ScDrawChanged )); // Navigator
}
SC_MOD()->AnythingChanged();
}
void ScDocShell::SetInUndo(bool bSet)
{
bIsInUndo = bSet;
}
void ScDocShell::GetDocStat( ScDocStat& rDocStat )
{
SfxPrinter* pPrinter = GetPrinter();
aDocument.GetDocStat( rDocStat );
rDocStat.nPageCount = 0;
if ( pPrinter )
for ( SCTAB i=0; i<rDocStat.nTableCount; i++ )
rDocStat.nPageCount = sal::static_int_cast<sal_uInt16>( rDocStat.nPageCount +
(sal_uInt16) ScPrintFunc( this, pPrinter, i ).GetTotalPages() );
}
VclPtr<SfxDocumentInfoDialog> ScDocShell::CreateDocumentInfoDialog( const SfxItemSet &rSet )
{
VclPtr<SfxDocumentInfoDialog> pDlg = VclPtr<SfxDocumentInfoDialog>::Create( nullptr, rSet );
ScDocShell* pDocSh = dynamic_cast< ScDocShell *>( SfxObjectShell::Current() );
// Only for statistics, if this Doc is shown; not from the Doc Manager
if( pDocSh == this )
{
ScAbstractDialogFactory* pFact = ScAbstractDialogFactory::Create();
OSL_ENSURE(pFact, "ScAbstractFactory create fail!");
::CreateTabPage ScDocStatPageCreate = pFact->GetTabPageCreatorFunc(SID_SC_TP_STAT);
OSL_ENSURE(ScDocStatPageCreate, "Tabpage create fail!");
pDlg->AddFontTabPage();
pDlg->AddTabPage( 42,
ScGlobal::GetRscString( STR_DOC_STAT ),
ScDocStatPageCreate,
nullptr);
}
return pDlg;
}
vcl::Window* ScDocShell::GetActiveDialogParent()
{
ScTabViewShell* pViewSh = ScTabViewShell::GetActiveViewShell();
if ( pViewSh )
return pViewSh->GetDialogParent();
else
return Application::GetDefDialogParent();
}
void ScDocShell::SetSolverSaveData( const ScOptSolverSave& rData )
{
delete pSolverSaveData;
pSolverSaveData = new ScOptSolverSave( rData );
}
ScSheetSaveData* ScDocShell::GetSheetSaveData()
{
if (!pSheetSaveData)
pSheetSaveData = new ScSheetSaveData;
return pSheetSaveData;
}
ScFormatSaveData* ScDocShell::GetFormatSaveData()
{
if (!mpFormatSaveData)
mpFormatSaveData = new ScFormatSaveData;
return mpFormatSaveData;
}
namespace {
void removeKeysIfExists(const Reference<ui::XAcceleratorConfiguration>& xScAccel, const vector<const awt::KeyEvent*>& rKeys)
{
vector<const awt::KeyEvent*>::const_iterator itr = rKeys.begin(), itrEnd = rKeys.end();
for (; itr != itrEnd; ++itr)
{
const awt::KeyEvent* p = *itr;
if (!p)
continue;
try
{
xScAccel->removeKeyEvent(*p);
}
catch (const container::NoSuchElementException&) {}
}
}
}
void ScDocShell::ResetKeyBindings( ScOptionsUtil::KeyBindingType eType )
{
using namespace ::com::sun::star::ui;
Reference<uno::XComponentContext> xContext = ::comphelper::getProcessComponentContext();
if (!xContext.is())
return;
Reference<XModuleUIConfigurationManagerSupplier> xModuleCfgSupplier(
theModuleUIConfigurationManagerSupplier::get(xContext) );
// Grab the Calc configuration.
Reference<XUIConfigurationManager> xConfigMgr =
xModuleCfgSupplier->getUIConfigurationManager(
"com.sun.star.sheet.SpreadsheetDocument");
if (!xConfigMgr.is())
return;
// shortcut manager
Reference<XAcceleratorConfiguration> xScAccel = xConfigMgr->getShortCutManager();
if (!xScAccel.is())
return;
vector<const awt::KeyEvent*> aKeys;
aKeys.reserve(9);
// Backspace key
awt::KeyEvent aBackspace;
aBackspace.KeyCode = awt::Key::BACKSPACE;
aBackspace.Modifiers = 0;
aKeys.push_back(&aBackspace);
// Delete key
awt::KeyEvent aDelete;
aDelete.KeyCode = awt::Key::DELETE;
aDelete.Modifiers = 0;
aKeys.push_back(&aDelete);
// Ctrl-D
awt::KeyEvent aCtrlD;
aCtrlD.KeyCode = awt::Key::D;
aCtrlD.Modifiers = awt::KeyModifier::MOD1;
aKeys.push_back(&aCtrlD);
// Alt-Down
awt::KeyEvent aAltDown;
aAltDown.KeyCode = awt::Key::DOWN;
aAltDown.Modifiers = awt::KeyModifier::MOD2;
aKeys.push_back(&aAltDown);
// Ctrl-Space
awt::KeyEvent aCtrlSpace;
aCtrlSpace.KeyCode = awt::Key::SPACE;
aCtrlSpace.Modifiers = awt::KeyModifier::MOD1;
aKeys.push_back(&aCtrlSpace);
// Ctrl-Shift-Space
awt::KeyEvent aCtrlShiftSpace;
aCtrlShiftSpace.KeyCode = awt::Key::SPACE;
aCtrlShiftSpace.Modifiers = awt::KeyModifier::MOD1 | awt::KeyModifier::SHIFT;
aKeys.push_back(&aCtrlShiftSpace);
// F4
awt::KeyEvent aF4;
aF4.KeyCode = awt::Key::F4;
aF4.Modifiers = 0;
aKeys.push_back(&aF4);
// CTRL+SHIFT+F4
awt::KeyEvent aCtrlShiftF4;
aCtrlShiftF4.KeyCode = awt::Key::F4;
aCtrlShiftF4.Modifiers = awt::KeyModifier::MOD1 | awt::KeyModifier::SHIFT;
aKeys.push_back(&aCtrlShiftF4);
// SHIFT+F4
awt::KeyEvent aShiftF4;
aShiftF4.KeyCode = awt::Key::F4;
aShiftF4.Modifiers = awt::KeyModifier::SHIFT;
aKeys.push_back(&aShiftF4);
// Remove all involved keys first, because swapping commands don't work
// well without doing this.
removeKeysIfExists(xScAccel, aKeys);
xScAccel->store();
switch (eType)
{
case ScOptionsUtil::KEY_DEFAULT:
xScAccel->setKeyEvent(aDelete, ".uno:ClearContents");
xScAccel->setKeyEvent(aBackspace, ".uno:Delete");
xScAccel->setKeyEvent(aCtrlD, ".uno:FillDown");
xScAccel->setKeyEvent(aAltDown, ".uno:DataSelect");
xScAccel->setKeyEvent(aCtrlSpace, ".uno:SelectColumn");
xScAccel->setKeyEvent(aCtrlShiftSpace, ".uno:SelectAll");
xScAccel->setKeyEvent(aF4, ".uno:ToggleRelative");
xScAccel->setKeyEvent(aCtrlShiftF4, ".uno:ViewDataSourceBrowser");
break;
case ScOptionsUtil::KEY_OOO_LEGACY:
xScAccel->setKeyEvent(aDelete, ".uno:Delete");
xScAccel->setKeyEvent(aBackspace, ".uno:ClearContents");
xScAccel->setKeyEvent(aCtrlD, ".uno:DataSelect");
xScAccel->setKeyEvent(aCtrlShiftSpace, ".uno:SelectColumn");
xScAccel->setKeyEvent(aF4, ".uno:ViewDataSourceBrowser");
xScAccel->setKeyEvent(aShiftF4, ".uno:ToggleRelative");
break;
default:
;
}
xScAccel->store();
}
void ScDocShell::UseSheetSaveEntries()
{
if (pSheetSaveData)
{
pSheetSaveData->UseSaveEntries(); // use positions from saved file for next saving
bool bHasEntries = false;
SCTAB nTabCount = aDocument.GetTableCount();
SCTAB nTab;
for (nTab = 0; nTab < nTabCount; ++nTab)
if (pSheetSaveData->HasStreamPos(nTab))
bHasEntries = true;
if (!bHasEntries)
{
// if no positions were set (for example, export to other format),
// reset all "valid" flags
for (nTab = 0; nTab < nTabCount; ++nTab)
aDocument.SetStreamValid(nTab, false);
}
}
}
// --- ScDocShellModificator ------------------------------------------
ScDocShellModificator::ScDocShellModificator( ScDocShell& rDS )
:
rDocShell( rDS ),
mpProtector(new ScRefreshTimerProtector(rDS.GetDocument().GetRefreshTimerControlAddress()))
{
ScDocument& rDoc = rDocShell.GetDocument();
bAutoCalcShellDisabled = rDoc.IsAutoCalcShellDisabled();
bIdleEnabled = rDoc.IsIdleEnabled();
rDoc.SetAutoCalcShellDisabled( true );
rDoc.EnableIdle(false);
}
ScDocShellModificator::~ScDocShellModificator() COVERITY_NOEXCEPT_FALSE
{
ScDocument& rDoc = rDocShell.GetDocument();
rDoc.SetAutoCalcShellDisabled( bAutoCalcShellDisabled );
if ( !bAutoCalcShellDisabled && rDocShell.IsDocumentModifiedPending() )
rDocShell.SetDocumentModified(); // last one shuts off the lights
rDoc.EnableIdle(bIdleEnabled);
}
void ScDocShellModificator::SetDocumentModified()
{
ScDocument& rDoc = rDocShell.GetDocument();
rDoc.PrepareFormulaCalc();
if ( !rDoc.IsImportingXML() )
{
// AutoCalcShellDisabled temporaer restaurieren
bool bDisabled = rDoc.IsAutoCalcShellDisabled();
rDoc.SetAutoCalcShellDisabled( bAutoCalcShellDisabled );
rDocShell.SetDocumentModified();
rDoc.SetAutoCalcShellDisabled( bDisabled );
}
else
{
// uno broadcast is necessary for api to work
// -> must also be done during xml import
rDoc.BroadcastUno( SfxHint( SfxHintId::DataChanged ) );
}
}
bool ScDocShell::IsChangeRecording() const
{
ScChangeTrack* pChangeTrack = aDocument.GetChangeTrack();
return pChangeTrack != nullptr;
}
bool ScDocShell::HasChangeRecordProtection() const
{
bool bRes = false;
ScChangeTrack* pChangeTrack = aDocument.GetChangeTrack();
if (pChangeTrack)
bRes = pChangeTrack->IsProtected();
return bRes;
}
void ScDocShell::SetChangeRecording( bool bActivate )
{
bool bOldChangeRecording = IsChangeRecording();
if (bActivate)
{
aDocument.StartChangeTracking();
ScChangeViewSettings aChangeViewSet;
aChangeViewSet.SetShowChanges(true);
aDocument.SetChangeViewSettings(aChangeViewSet);
}
else
{
aDocument.EndChangeTracking();
PostPaintGridAll();
}
if (bOldChangeRecording != IsChangeRecording())
{
UpdateAcceptChangesDialog();
// invalidate slots
SfxBindings* pBindings = GetViewBindings();
if (pBindings)
pBindings->InvalidateAll(false);
}
}
void ScDocShell::SetProtectionPassword( const OUString &rNewPassword )
{
ScChangeTrack* pChangeTrack = aDocument.GetChangeTrack();
if (pChangeTrack)
{
bool bProtected = pChangeTrack->IsProtected();
if (!rNewPassword.isEmpty())
{
// when password protection is applied change tracking must always be active
SetChangeRecording( true );
css::uno::Sequence< sal_Int8 > aProtectionHash;
SvPasswordHelper::GetHashPassword( aProtectionHash, rNewPassword );
pChangeTrack->SetProtection( aProtectionHash );
}
else
{
pChangeTrack->SetProtection( css::uno::Sequence< sal_Int8 >() );
}
if ( bProtected != pChangeTrack->IsProtected() )
{
UpdateAcceptChangesDialog();
SetDocumentModified();
}
}
}
bool ScDocShell::GetProtectionHash( /*out*/ css::uno::Sequence< sal_Int8 > &rPasswordHash )
{
bool bRes = false;
ScChangeTrack* pChangeTrack = aDocument.GetChangeTrack();
if (pChangeTrack && pChangeTrack->IsProtected())
{
rPasswordHash = pChangeTrack->GetProtection();
bRes = true;
}
return bRes;
}
void ScDocShell::SetIsInUcalc()
{
mbUcalcTest = true;
}
extern "C" SAL_DLLPUBLIC_EXPORT bool SAL_CALL TestImportSLK(SvStream &rStream)
{
ScDLL::Init();
ScDocument aDocument;
ScDocOptions aDocOpt = aDocument.GetDocOptions();
aDocOpt.SetLookUpColRowNames(false);
aDocument.SetDocOptions(aDocOpt);
aDocument.MakeTable(0);
aDocument.EnableExecuteLink(false);
ScImportExport aImpEx(&aDocument);
return aImpEx.ImportStream(rStream, OUString(), SotClipboardFormatId::SYLK);
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */