/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "scitems.hxx" #include #include #include #include #include #include #include #include "attrib.hxx" #include "pagedata.hxx" #include "tabview.hxx" #include "tabvwsh.hxx" #include "printfun.hxx" #include "stlpool.hxx" #include "docsh.hxx" #include "gridwin.hxx" #include "olinewin.hxx" #include "uiitems.hxx" #include "sc.hrc" #include "viewutil.hxx" #include "colrowba.hxx" #include "waitoff.hxx" #include "globstr.hrc" #include "scmod.hxx" #include "tabprotection.hxx" #include "markdata.hxx" #include "inputopt.hxx" namespace { bool isCellQualified(ScDocument* pDoc, SCCOL nCol, SCROW nRow, SCTAB nTab, bool bSelectLocked, bool bSelectUnlocked) { bool bCellProtected = pDoc->HasAttrib( nCol, nRow, nTab, nCol, nRow, nTab, HASATTR_PROTECTED); if (bCellProtected && !bSelectLocked) return false; if (!bCellProtected && !bSelectUnlocked) return false; return true; } void moveCursorByProtRule( SCCOL& rCol, SCROW& rRow, SCsCOL nMovX, SCsROW nMovY, SCTAB nTab, ScDocument* pDoc) { bool bSelectLocked = true; bool bSelectUnlocked = true; ScTableProtection* pTabProtection = pDoc->GetTabProtection(nTab); if (pTabProtection && pTabProtection->isProtected()) { bSelectLocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSelectUnlocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } if (nMovX > 0) { for (SCCOL i = 0; i < nMovX && rCol < MAXCOL; ++i) { SCCOL nNewUnhiddenCol = rCol + 1; SCCOL nEndCol = 0; while(pDoc->ColHidden(nNewUnhiddenCol, nTab, NULL, &nEndCol)) { if(nNewUnhiddenCol >= MAXCOL) return; i += nEndCol - nNewUnhiddenCol + 1; nNewUnhiddenCol = nEndCol +1; } if (!isCellQualified(pDoc, nNewUnhiddenCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) break; rCol = nNewUnhiddenCol; } } else if (nMovX < 0) { for (SCCOL i = 0; i > nMovX && rCol > 0; --i) { SCCOL nNewUnhiddenCol = rCol - 1; SCCOL nStartCol = 0; while(pDoc->ColHidden(nNewUnhiddenCol, nTab, &nStartCol)) { if(nNewUnhiddenCol <= 0) return; i -= nNewUnhiddenCol - nStartCol + 1; nNewUnhiddenCol = nStartCol - 1; } if (!isCellQualified(pDoc, nNewUnhiddenCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) break; rCol = nNewUnhiddenCol; } } if (nMovY > 0) { for (SCROW i = 0; i < nMovY && rRow < MAXROW; ++i) { SCROW nNewUnhiddenRow = rRow + 1; SCROW nEndRow = 0; while(pDoc->RowHidden(nNewUnhiddenRow, nTab, NULL, &nEndRow)) { if(nNewUnhiddenRow >= MAXROW) return; i += nEndRow - nNewUnhiddenRow + 1; nNewUnhiddenRow = nEndRow + 1; } if (!isCellQualified(pDoc, rCol, nNewUnhiddenRow, nTab, bSelectLocked, bSelectUnlocked)) break; rRow = nNewUnhiddenRow; } } else if (nMovY < 0) { for (SCROW i = 0; i > nMovY && rRow > 0; --i) { SCROW nNewUnhiddenRow = rRow - 1; SCROW nStartRow = 0; while(pDoc->RowHidden(nNewUnhiddenRow, nTab, &nStartRow)) { if(nNewUnhiddenRow <= 0) return; i -= nNewUnhiddenRow - nStartRow + 1; nNewUnhiddenRow = nStartRow - 1; } if (!isCellQualified(pDoc, rCol, nNewUnhiddenRow, nTab, bSelectLocked, bSelectUnlocked)) break; rRow = nNewUnhiddenRow; } } } bool checkBoundary(SCCOL& rCol, SCROW& rRow) { bool bGood = true; if (rCol < 0) { rCol = 0; bGood = false; } else if (rCol > MAXCOL) { rCol = MAXCOL; bGood = false; } if (rRow < 0) { rRow = 0; bGood = false; } else if (rRow > MAXROW) { rRow = MAXROW; bGood = false; } return bGood; } void moveCursorByMergedCell( SCCOL& rCol, SCROW& rRow, SCsCOL nMovX, SCsROW nMovY, SCTAB nTab, ScDocument* pDoc, const ScViewData& rViewData) { SCCOL nOrigX = rViewData.GetCurX(); SCROW nOrigY = rViewData.GetCurY(); ScTableProtection* pTabProtection = pDoc->GetTabProtection(nTab); bool bSelectLocked = true; bool bSelectUnlocked = true; if (pTabProtection && pTabProtection->isProtected()) { bSelectLocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSelectUnlocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } const ScMergeAttr* pMergeAttr = static_cast( pDoc->GetAttr(nOrigX, nOrigY, nTab, ATTR_MERGE)); bool bOriginMerged = false; SCsCOL nColSpan = 1; SCsROW nRowSpan = 1; if (pMergeAttr && pMergeAttr->IsMerged()) { nColSpan = pMergeAttr->GetColMerge(); nRowSpan = pMergeAttr->GetRowMerge(); bOriginMerged = true; } if (nMovX > 0) { SCCOL nOld = rCol; if (bOriginMerged) { // Original cell is merged. Push the block end outside the merged region. if (nOrigX < MAXCOL && nOrigX < rCol && rCol <= nOrigX + nColSpan - 1) rCol = nOrigX + nColSpan; } else { pDoc->SkipOverlapped(rCol, rRow, nTab); } if (nOld < rCol) { // The block end has moved. Check the protection setting and move back if needed. checkBoundary(rCol, rRow); if (!isCellQualified(pDoc, rCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) --rCol; } } if (nMovX < 0) { SCCOL nOld = rCol; if (bOriginMerged) { if (nOrigX > 0 && nOrigX <= rCol && rCol < nOrigX + nColSpan - 1) // Block end is still within the merged region. Push it outside. rCol = nOrigX - 1; } else { pDoc->SkipOverlapped(rCol, rRow, nTab); } if (nOld > rCol) { // The block end has moved. Check the protection setting and move back if needed. checkBoundary(rCol, rRow); if (!isCellQualified(pDoc, rCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) ++rCol; } } if (nMovY > 0) { SCROW nOld = rRow; if (bOriginMerged) { // Original cell is merged. Push the block end outside the merged region. if (nOrigY < MAXROW && nOrigY < rRow && rRow <= nOrigY + nRowSpan - 1) rRow = nOrigY + nRowSpan; } else { pDoc->SkipOverlapped(rCol, rRow, nTab); } if (nOld < rRow) { // The block end has moved. Check the protection setting and move back if needed. checkBoundary(rCol, rRow); if (!isCellQualified(pDoc, rCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) --rRow; } } if (nMovY < 0) { SCROW nOld = rRow; if (bOriginMerged) { if (nOrigY > 0 && nOrigY <= rRow && rRow < nOrigY + nRowSpan - 1) // Block end is still within the merged region. Push it outside. rRow = nOrigY - 1; } else { pDoc->SkipOverlapped(rCol, rRow, nTab); } if (nOld > rRow) { // The block end has moved. Check the protection setting and move back if needed. checkBoundary(rCol, rRow); if (!isCellQualified(pDoc, rCol, rRow, nTab, bSelectLocked, bSelectUnlocked)) ++rRow; } } } } void ScTabView::PaintMarks(SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow ) { if (!ValidCol(nStartCol)) nStartCol = MAXCOL; if (!ValidRow(nStartRow)) nStartRow = MAXROW; if (!ValidCol(nEndCol)) nEndCol = MAXCOL; if (!ValidRow(nEndRow)) nEndRow = MAXROW; bool bLeft = (nStartCol==0 && nEndCol==MAXCOL); bool bTop = (nStartRow==0 && nEndRow==MAXROW); if (bLeft) PaintLeftArea( nStartRow, nEndRow ); if (bTop) PaintTopArea( nStartCol, nEndCol ); aViewData.GetDocument()->ExtendMerge( nStartCol, nStartRow, nEndCol, nEndRow, aViewData.GetTabNo() ); PaintArea( nStartCol, nStartRow, nEndCol, nEndRow, SC_UPDATE_MARKS ); } bool ScTabView::IsMarking( SCCOL nCol, SCROW nRow, SCTAB nTab ) const { return IsBlockMode() && nBlockStartX == nCol && nBlockStartY == nRow && nBlockStartZ == nTab; } void ScTabView::InitOwnBlockMode() { if (!IsBlockMode()) { // Wenn keine (alte) Markierung mehr da ist, Anker in SelectionEngine loeschen: ScMarkData& rMark = aViewData.GetMarkData(); if (!rMark.IsMarked() && !rMark.IsMultiMarked()) GetSelEngine()->CursorPosChanging( false, false ); meBlockMode = Own; nBlockStartX = 0; nBlockStartY = 0; nBlockStartZ = 0; nBlockEndX = 0; nBlockEndY = 0; nBlockEndZ = 0; SelectionChanged(); // Status wird mit gesetzer Markierung abgefragt } } void ScTabView::InitBlockMode( SCCOL nCurX, SCROW nCurY, SCTAB nCurZ, bool bTestNeg, bool bCols, bool bRows, bool bForceNeg ) { if (!IsBlockMode()) { if (!ValidCol(nCurX)) nCurX = MAXCOL; if (!ValidRow(nCurY)) nCurY = MAXROW; ScMarkData& rMark = aViewData.GetMarkData(); SCTAB nTab = aViewData.GetTabNo(); // Teil von Markierung aufheben? if (bForceNeg) bBlockNeg = true; else if (bTestNeg) { if ( bCols ) bBlockNeg = rMark.IsColumnMarked( nCurX ); else if ( bRows ) bBlockNeg = rMark.IsRowMarked( nCurY ); else bBlockNeg = rMark.IsCellMarked( nCurX, nCurY ); } else bBlockNeg = false; rMark.SetMarkNegative(bBlockNeg); meBlockMode = Normal; bBlockCols = bCols; bBlockRows = bRows; nBlockStartX = nBlockStartXOrig = nCurX; nBlockStartY = nBlockStartYOrig = nCurY; nBlockStartZ = nCurZ; nBlockEndX = nOldCurX = nBlockStartX; nBlockEndY = nOldCurY = nBlockStartY; nBlockEndZ = nBlockStartZ; if (bBlockCols) { nBlockStartY = nBlockStartYOrig = 0; nBlockEndY = MAXROW; } if (bBlockRows) { nBlockStartX = nBlockStartXOrig = 0; nBlockEndX = MAXCOL; } rMark.SetMarkArea( ScRange( nBlockStartX,nBlockStartY, nTab, nBlockEndX,nBlockEndY, nTab ) ); UpdateSelectionOverlay(); } } void ScTabView::DoneBlockMode( bool bContinue ) { // Wenn zwischen Tabellen- und Header SelectionEngine gewechselt wird, // wird evtl. DeselectAll gerufen, weil die andere Engine keinen Anker hat. // Mit bMoveIsShift wird verhindert, dass dann die Selektion aufgehoben wird. if (IsBlockMode() && !bMoveIsShift) { ScMarkData& rMark = aViewData.GetMarkData(); bool bFlag = rMark.GetMarkingFlag(); rMark.SetMarking(false); if (bBlockNeg && !bContinue) rMark.MarkToMulti(); if (bContinue) rMark.MarkToMulti(); else { // Die Tabelle kann an dieser Stelle ungueltig sein, weil DoneBlockMode // aus SetTabNo aufgerufen wird // (z.B. wenn die aktuelle Tabelle von einer anderen View aus geloescht wird) SCTAB nTab = aViewData.GetTabNo(); ScDocument* pDoc = aViewData.GetDocument(); if ( pDoc->HasTable(nTab) ) PaintBlock( true ); // true -> Block loeschen else rMark.ResetMark(); } meBlockMode = None; rMark.SetMarking(bFlag); rMark.SetMarkNegative(false); } } bool ScTabView::IsBlockMode() const { return meBlockMode != None; } void ScTabView::MarkCursor( SCCOL nCurX, SCROW nCurY, SCTAB nCurZ, bool bCols, bool bRows, bool bCellSelection ) { if (!ValidCol(nCurX)) nCurX = MAXCOL; if (!ValidRow(nCurY)) nCurY = MAXROW; if (!IsBlockMode()) { OSL_FAIL( "MarkCursor nicht im BlockMode" ); InitBlockMode( nCurX, nCurY, nCurZ, false, bCols, bRows ); } if (bCols) nCurY = MAXROW; if (bRows) nCurX = MAXCOL; ScMarkData& rMark = aViewData.GetMarkData(); OSL_ENSURE(rMark.IsMarked() || rMark.IsMultiMarked(), "MarkCursor, !IsMarked()"); ScRange aMarkRange; rMark.GetMarkArea(aMarkRange); if (( aMarkRange.aStart.Col() != nBlockStartX && aMarkRange.aEnd.Col() != nBlockStartX ) || ( aMarkRange.aStart.Row() != nBlockStartY && aMarkRange.aEnd.Row() != nBlockStartY ) || ( meBlockMode == Own )) { // Markierung ist veraendert worden // (z.B. MarkToSimple, wenn per negativ alles bis auf ein Rechteck geloescht wurde) // oder nach InitOwnBlockMode wird mit Shift-Klick weitermarkiert... bool bOldShift = bMoveIsShift; bMoveIsShift = false; // wirklich umsetzen DoneBlockMode(false); //! direkt Variablen setzen? (-> kein Geflacker) bMoveIsShift = bOldShift; InitBlockMode( aMarkRange.aStart.Col(), aMarkRange.aStart.Row(), nBlockStartZ, rMark.IsMarkNegative(), bCols, bRows ); } if ( nCurX != nOldCurX || nCurY != nOldCurY ) { // Current cursor has moved SCTAB nTab = nCurZ; if ( bCellSelection ) { // Expand selection area accordingly when the current selection ends // with a merged cell. SCsCOL nCurXOffset = 0; SCsCOL nBlockStartXOffset = 0; SCsROW nCurYOffset = 0; SCsROW nBlockStartYOffset = 0; bool bBlockStartMerged = false; const ScMergeAttr* pMergeAttr = NULL; ScDocument* pDocument = aViewData.GetDocument(); // The following block checks whether or not the "BlockStart" (anchor) // cell is merged. If it's merged, it'll then move the position of the // anchor cell to the corner that's diagonally opposite of the // direction of a current selection area. For instance, if a current // selection is moving in the upperleft direction, the anchor cell will // move to the lower-right corner of the merged anchor cell, and so on. pMergeAttr = static_cast( pDocument->GetAttr( nBlockStartXOrig, nBlockStartYOrig, nTab, ATTR_MERGE ) ); if ( pMergeAttr->IsMerged() ) { SCsCOL nColSpan = pMergeAttr->GetColMerge(); SCsROW nRowSpan = pMergeAttr->GetRowMerge(); if ( !( nCurX >= nBlockStartXOrig + nColSpan - 1 && nCurY >= nBlockStartYOrig + nRowSpan - 1 ) ) { nBlockStartX = nCurX >= nBlockStartXOrig ? nBlockStartXOrig : nBlockStartXOrig + nColSpan - 1; nBlockStartY = nCurY >= nBlockStartYOrig ? nBlockStartYOrig : nBlockStartYOrig + nRowSpan - 1; nCurXOffset = (nCurX >= nBlockStartXOrig && nCurX < nBlockStartXOrig + nColSpan - 1) ? nBlockStartXOrig - nCurX + nColSpan - 1 : 0; nCurYOffset = (nCurY >= nBlockStartYOrig && nCurY < nBlockStartYOrig + nRowSpan - 1) ? nBlockStartYOrig - nCurY + nRowSpan - 1 : 0; bBlockStartMerged = true; } } // The following block checks whether or not the current cell is // merged. If it is, it'll then set the appropriate X & Y offset // values (nCurXOffset & nCurYOffset) such that the selection area will // grow by those specified offset amounts. Note that the values of // nCurXOffset/nCurYOffset may also be specified in the previous code // block, in which case whichever value is greater will take on. pMergeAttr = static_cast( pDocument->GetAttr( nCurX, nCurY, nTab, ATTR_MERGE ) ); if ( pMergeAttr->IsMerged() ) { SCsCOL nColSpan = pMergeAttr->GetColMerge(); SCsROW nRowSpan = pMergeAttr->GetRowMerge(); if ( !( nBlockStartX >= nCurX + nColSpan - 1 && nBlockStartY >= nCurY + nRowSpan - 1 ) ) { if ( nBlockStartX <= nCurX + nColSpan - 1 ) { SCsCOL nCurXOffsetTemp = (nCurX < nCurX + nColSpan - 1) ? nColSpan - 1 : 0; nCurXOffset = nCurXOffset > nCurXOffsetTemp ? nCurXOffset : nCurXOffsetTemp; } if ( nBlockStartY <= nCurY + nRowSpan - 1 ) { SCsROW nCurYOffsetTemp = (nCurY < nCurY + nRowSpan - 1) ? nRowSpan - 1 : 0; nCurYOffset = nCurYOffset > nCurYOffsetTemp ? nCurYOffset : nCurYOffsetTemp; } if ( !( nBlockStartX <= nCurX && nBlockStartY <= nCurY ) && !( nBlockStartX > nCurX + nColSpan - 1 && nBlockStartY > nCurY + nRowSpan - 1 ) ) { nBlockStartXOffset = (nBlockStartX > nCurX && nBlockStartX <= nCurX + nColSpan - 1) ? nCurX - nBlockStartX : 0; nBlockStartYOffset = (nBlockStartY > nCurY && nBlockStartY <= nCurY + nRowSpan - 1) ? nCurY - nBlockStartY : 0; } } } else { // The current cell is not merged. Move the anchor cell to its // original position. if ( !bBlockStartMerged ) { nBlockStartX = nBlockStartXOrig; nBlockStartY = nBlockStartYOrig; } } nBlockStartX = nBlockStartX + nBlockStartXOffset >= 0 ? nBlockStartX + nBlockStartXOffset : 0; nBlockStartY = nBlockStartY + nBlockStartYOffset >= 0 ? nBlockStartY + nBlockStartYOffset : 0; nBlockEndX = nCurX + nCurXOffset > MAXCOL ? MAXCOL : nCurX + nCurXOffset; nBlockEndY = nCurY + nCurYOffset > MAXROW ? MAXROW : nCurY + nCurYOffset; } else { nBlockEndX = nCurX; nBlockEndY = nCurY; } // Set new selection area rMark.SetMarkArea( ScRange( nBlockStartX, nBlockStartY, nTab, nBlockEndX, nBlockEndY, nTab ) ); UpdateSelectionOverlay(); SelectionChanged(); nOldCurX = nCurX; nOldCurY = nCurY; aViewData.GetViewShell()->UpdateInputHandler(); } if ( !bCols && !bRows ) aHdrFunc.SetAnchorFlag( false ); } void ScTabView::GetPageMoveEndPosition(SCsCOL nMovX, SCsROW nMovY, SCsCOL& rPageX, SCsROW& rPageY) { SCCOL nCurX; SCROW nCurY; if (aViewData.IsRefMode()) { nCurX = aViewData.GetRefEndX(); nCurY = aViewData.GetRefEndY(); } else if (IsBlockMode()) { // block end position. nCurX = nBlockEndX; nCurY = nBlockEndY; } else { // cursor position nCurX = aViewData.GetCurX(); nCurY = aViewData.GetCurY(); } ScSplitPos eWhich = aViewData.GetActivePart(); ScHSplitPos eWhichX = WhichH( eWhich ); ScVSplitPos eWhichY = WhichV( eWhich ); SCsCOL nPageX; SCsROW nPageY; if (nMovX >= 0) nPageX = ((SCsCOL) aViewData.CellsAtX( nCurX, 1, eWhichX )) * nMovX; else nPageX = ((SCsCOL) aViewData.CellsAtX( nCurX, -1, eWhichX )) * nMovX; if (nMovY >= 0) nPageY = ((SCsROW) aViewData.CellsAtY( nCurY, 1, eWhichY )) * nMovY; else nPageY = ((SCsROW) aViewData.CellsAtY( nCurY, -1, eWhichY )) * nMovY; if (nMovX != 0 && nPageX == 0) nPageX = (nMovX>0) ? 1 : -1; if (nMovY != 0 && nPageY == 0) nPageY = (nMovY>0) ? 1 : -1; rPageX = nPageX; rPageY = nPageY; } void ScTabView::GetAreaMoveEndPosition(SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode, SCsCOL& rAreaX, SCsROW& rAreaY, ScFollowMode& rMode) { SCCOL nNewX = -1; SCROW nNewY = -1; // current cursor position. SCCOL nCurX = aViewData.GetCurX(); SCROW nCurY = aViewData.GetCurY(); if (aViewData.IsRefMode()) { nNewX = aViewData.GetRefEndX(); nNewY = aViewData.GetRefEndY(); nCurX = aViewData.GetRefStartX(); nCurY = aViewData.GetRefStartY(); } else if (IsBlockMode()) { // block end position. nNewX = nBlockEndX; nNewY = nBlockEndY; } else { nNewX = nCurX; nNewY = nCurY; } ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); // FindAreaPos kennt nur -1 oder 1 als Richtung ScModule* pScModule = SC_MOD(); bool bLegacyCellSelection = pScModule->GetInputOptions().GetLegacyCellSelection(); SCCOL nVirtualX = bLegacyCellSelection ? nNewX : nCurX; SCROW nVirtualY = bLegacyCellSelection ? nNewY : nCurY; SCsCOLROW i; if ( nMovX > 0 ) for ( i=0; iFindAreaPos( nNewX, nVirtualY, nTab, SC_MOVE_RIGHT ); if ( nMovX < 0 ) for ( i=0; i<-nMovX; i++ ) pDoc->FindAreaPos( nNewX, nVirtualY, nTab, SC_MOVE_LEFT ); if ( nMovY > 0 ) for ( i=0; iFindAreaPos( nVirtualX, nNewY, nTab, SC_MOVE_DOWN ); if ( nMovY < 0 ) for ( i=0; i<-nMovY; i++ ) pDoc->FindAreaPos( nVirtualX, nNewY, nTab, SC_MOVE_UP ); if (eMode==SC_FOLLOW_JUMP) // unten/rechts nicht zuviel grau anzeigen { if (nMovX != 0 && nNewX == MAXCOL) eMode = SC_FOLLOW_LINE; if (nMovY != 0 && nNewY == MAXROW) eMode = SC_FOLLOW_LINE; } if (aViewData.IsRefMode()) { rAreaX = nNewX - aViewData.GetRefEndX(); rAreaY = nNewY - aViewData.GetRefEndY(); } else if (IsBlockMode()) { rAreaX = nNewX - nBlockEndX; rAreaY = nNewY - nBlockEndY; } else { rAreaX = nNewX - nCurX; rAreaY = nNewY - nCurY; } rMode = eMode; } void ScTabView::SkipCursorHorizontal(SCsCOL& rCurX, SCsROW& rCurY, SCsCOL nOldX, SCsROW nMovX) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); bool bSkipProtected = false, bSkipUnprotected = false; ScTableProtection* pProtect = pDoc->GetTabProtection(nTab); if (pProtect && pProtect->isProtected()) { bSkipProtected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSkipUnprotected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } bool bSkipCell = false; bool bHFlip = false; do { bSkipCell = pDoc->ColHidden(rCurX, nTab) || pDoc->IsHorOverlapped(rCurX, rCurY, nTab); if (bSkipProtected && !bSkipCell) bSkipCell = pDoc->HasAttrib(rCurX, rCurY, nTab, rCurX, rCurY, nTab, HASATTR_PROTECTED); if (bSkipUnprotected && !bSkipCell) bSkipCell = !pDoc->HasAttrib(rCurX, rCurY, nTab, rCurX, rCurY, nTab, HASATTR_PROTECTED); if (bSkipCell) { if (rCurX <= 0 || rCurX >= MAXCOL) { if (bHFlip) { rCurX = nOldX; bSkipCell = false; } else { nMovX = -nMovX; if (nMovX > 0) ++rCurX; else --rCurX; bHFlip = true; } } else if (nMovX > 0) ++rCurX; else --rCurX; } } while (bSkipCell); if (pDoc->IsVerOverlapped(rCurX, rCurY, nTab)) { aViewData.SetOldCursor(rCurX, rCurY); while (pDoc->IsVerOverlapped(rCurX, rCurY, nTab)) --rCurY; } } void ScTabView::SkipCursorVertical(SCsCOL& rCurX, SCsROW& rCurY, SCsROW nOldY, SCsROW nMovY) { ScDocument* pDoc = aViewData.GetDocument(); SCTAB nTab = aViewData.GetTabNo(); bool bSkipProtected = false, bSkipUnprotected = false; ScTableProtection* pProtect = pDoc->GetTabProtection(nTab); if (pProtect && pProtect->isProtected()) { bSkipProtected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSkipUnprotected = !pProtect->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } bool bSkipCell = false; bool bVFlip = false; do { SCROW nLastRow = -1; bSkipCell = pDoc->RowHidden(rCurY, nTab, NULL, &nLastRow) || pDoc->IsVerOverlapped( rCurX, rCurY, nTab ); if (bSkipProtected && !bSkipCell) bSkipCell = pDoc->HasAttrib(rCurX, rCurY, nTab, rCurX, rCurY, nTab, HASATTR_PROTECTED); if (bSkipUnprotected && !bSkipCell) bSkipCell = !pDoc->HasAttrib(rCurX, rCurY, nTab, rCurX, rCurY, nTab, HASATTR_PROTECTED); if (bSkipCell) { if (rCurY <= 0 || rCurY >= MAXROW) { if (bVFlip) { rCurY = nOldY; bSkipCell = false; } else { nMovY = -nMovY; if (nMovY > 0) ++rCurY; else --rCurY; bVFlip = true; } } else if (nMovY > 0) ++rCurY; else --rCurY; } } while (bSkipCell); if (pDoc->IsHorOverlapped(rCurX, rCurY, nTab)) { aViewData.SetOldCursor(rCurX, rCurY); while (pDoc->IsHorOverlapped(rCurX, rCurY, nTab)) --rCurX; } } void ScTabView::ExpandBlock(SCsCOL nMovX, SCsROW nMovY, ScFollowMode eMode) { if (!nMovX && !nMovY) // Nothing to do. Bail out. return; ScTabViewShell* pViewShell = aViewData.GetViewShell(); bool bRefInputMode = pViewShell && pViewShell->IsRefInputMode(); if (bRefInputMode && !aViewData.IsRefMode()) // initialize formula reference mode if it hasn't already. InitRefMode(aViewData.GetCurX(), aViewData.GetCurY(), aViewData.GetTabNo(), SC_REFTYPE_REF); ScDocument* pDoc = aViewData.GetDocument(); if (aViewData.IsRefMode()) { // formula reference mode SCCOL nNewX = aViewData.GetRefEndX(); SCROW nNewY = aViewData.GetRefEndY(); SCTAB nRefTab = aViewData.GetRefEndZ(); bool bSelectLocked = true; bool bSelectUnlocked = true; ScTableProtection* pTabProtection = pDoc->GetTabProtection(nRefTab); if (pTabProtection && pTabProtection->isProtected()) { bSelectLocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_LOCKED_CELLS); bSelectUnlocked = pTabProtection->isOptionEnabled(ScTableProtection::SELECT_UNLOCKED_CELLS); } moveCursorByProtRule(nNewX, nNewY, nMovX, nMovY, nRefTab, pDoc); checkBoundary(nNewX, nNewY); if (nMovX) { SCCOL nTempX = nNewX; while (pDoc->IsHorOverlapped(nTempX, nNewY, nRefTab)) { if (nMovX > 0) ++nTempX; else --nTempX; if (!checkBoundary(nTempX, nNewY)) break; } if (isCellQualified(pDoc, nTempX, nNewY, nRefTab, bSelectLocked, bSelectUnlocked)) nNewX = nTempX; } if (nMovY) { SCROW nTempY = nNewY; while (pDoc->IsVerOverlapped(nNewX, nTempY, nRefTab)) { if (nMovY > 0) ++nTempY; else --nTempY; if (!checkBoundary(nNewX, nTempY)) break; } if (isCellQualified(pDoc, nNewX, nTempY, nRefTab, bSelectLocked, bSelectUnlocked)) nNewY = nTempY; } pDoc->SkipOverlapped(nNewX, nNewY, nRefTab); UpdateRef(nNewX, nNewY, nRefTab); AlignToCursor(nNewX, nNewY, eMode); } else { // normal selection mode SCTAB nTab = aViewData.GetTabNo(); SCCOL nOrigX = aViewData.GetCurX(); SCROW nOrigY = aViewData.GetCurY(); // Note that the origin position *never* moves during selection. if (!IsBlockMode()) InitBlockMode(nOrigX, nOrigY, nTab, true); moveCursorByProtRule(nBlockEndX, nBlockEndY, nMovX, nMovY, nTab, pDoc); checkBoundary(nBlockEndX, nBlockEndY); moveCursorByMergedCell(nBlockEndX, nBlockEndY, nMovX, nMovY, nTab, pDoc, aViewData); checkBoundary(nBlockEndX, nBlockEndY); MarkCursor(nBlockEndX, nBlockEndY, nTab, false, false, true); // Check if the entire row(s) or column(s) are selected. ScSplitPos eActive = aViewData.GetActivePart(); bool bRowSelected = (nBlockStartX == 0 && nBlockEndX == MAXCOL); bool bColSelected = (nBlockStartY == 0 && nBlockEndY == MAXROW); SCsCOL nAlignX = bRowSelected ? aViewData.GetPosX(WhichH(eActive)) : nBlockEndX; SCsROW nAlignY = bColSelected ? aViewData.GetPosY(WhichV(eActive)) : nBlockEndY; AlignToCursor(nAlignX, nAlignY, eMode); SelectionChanged(); } } void ScTabView::ExpandBlockPage(SCsCOL nMovX, SCsROW nMovY) { SCsCOL nPageX; SCsROW nPageY; GetPageMoveEndPosition(nMovX, nMovY, nPageX, nPageY); ExpandBlock(nPageX, nPageY, SC_FOLLOW_FIX); } void ScTabView::ExpandBlockArea(SCsCOL nMovX, SCsROW nMovY) { SCsCOL nAreaX; SCsROW nAreaY; ScFollowMode eMode; GetAreaMoveEndPosition(nMovX, nMovY, SC_FOLLOW_JUMP, nAreaX, nAreaY, eMode); ExpandBlock(nAreaX, nAreaY, eMode); } void ScTabView::UpdateCopySourceOverlay() { for (sal_uInt8 i = 0; i < 4; ++i) if (pGridWin[i] && pGridWin[i]->IsVisible()) pGridWin[i]->UpdateCopySourceOverlay(); } void ScTabView::UpdateSelectionOverlay() { for (sal_uInt16 i=0; i<4; i++) if ( pGridWin[i] && pGridWin[i]->IsVisible() ) pGridWin[i]->UpdateSelectionOverlay(); } void ScTabView::UpdateShrinkOverlay() { for (sal_uInt16 i=0; i<4; i++) if ( pGridWin[i] && pGridWin[i]->IsVisible() ) pGridWin[i]->UpdateShrinkOverlay(); } void ScTabView::UpdateAllOverlays() { for (sal_uInt16 i=0; i<4; i++) if ( pGridWin[i] && pGridWin[i]->IsVisible() ) pGridWin[i]->UpdateAllOverlays(); } //! //! PaintBlock in zwei Methoden aufteilen: RepaintBlock und RemoveBlock o.ae. //! void ScTabView::PaintBlock( bool bReset ) { ScMarkData& rMark = aViewData.GetMarkData(); SCTAB nTab = aViewData.GetTabNo(); bool bMulti = rMark.IsMultiMarked(); if (rMark.IsMarked() || bMulti) { ScRange aMarkRange; HideAllCursors(); if (bMulti) { bool bFlag = rMark.GetMarkingFlag(); rMark.SetMarking(false); rMark.MarkToMulti(); rMark.GetMultiMarkArea(aMarkRange); rMark.MarkToSimple(); rMark.SetMarking(bFlag); } else rMark.GetMarkArea(aMarkRange); nBlockStartX = aMarkRange.aStart.Col(); nBlockStartY = aMarkRange.aStart.Row(); nBlockStartZ = aMarkRange.aStart.Tab(); nBlockEndX = aMarkRange.aEnd.Col(); nBlockEndY = aMarkRange.aEnd.Row(); nBlockEndZ = aMarkRange.aEnd.Tab(); bool bDidReset = false; if ( nTab>=nBlockStartZ && nTab<=nBlockEndZ ) { if ( bReset ) { // Invertieren beim Loeschen nur auf aktiver View if ( aViewData.IsActive() ) { rMark.ResetMark(); UpdateSelectionOverlay(); bDidReset = true; } } else PaintMarks( nBlockStartX, nBlockStartY, nBlockEndX, nBlockEndY ); } if ( bReset && !bDidReset ) rMark.ResetMark(); ShowAllCursors(); } } void ScTabView::SelectAll( bool bContinue ) { ScMarkData& rMark = aViewData.GetMarkData(); SCTAB nTab = aViewData.GetTabNo(); if (rMark.IsMarked()) { ScRange aMarkRange; rMark.GetMarkArea( aMarkRange ); if ( aMarkRange == ScRange( 0,0,nTab, MAXCOL,MAXROW,nTab ) ) return; } DoneBlockMode( bContinue ); InitBlockMode( 0,0,nTab ); MarkCursor( MAXCOL,MAXROW,nTab ); SelectionChanged(); } void ScTabView::SelectAllTables() { ScDocument* pDoc = aViewData.GetDocument(); ScMarkData& rMark = aViewData.GetMarkData(); SCTAB nCount = pDoc->GetTableCount(); if (nCount>1) { for (SCTAB i=0; iPostPaintExtras(); SfxBindings& rBind = aViewData.GetBindings(); rBind.Invalidate( FID_FILL_TAB ); rBind.Invalidate( FID_TAB_DESELECTALL ); } } void ScTabView::DeselectAllTables() { ScDocument* pDoc = aViewData.GetDocument(); ScMarkData& rMark = aViewData.GetMarkData(); SCTAB nTab = aViewData.GetTabNo(); SCTAB nCount = pDoc->GetTableCount(); for (SCTAB i=0; iPostPaintExtras(); SfxBindings& rBind = aViewData.GetBindings(); rBind.Invalidate( FID_FILL_TAB ); rBind.Invalidate( FID_TAB_DESELECTALL ); } static bool lcl_FitsInWindow( double fScaleX, double fScaleY, sal_uInt16 nZoom, long nWindowX, long nWindowY, ScDocument* pDoc, SCTAB nTab, SCCOL nStartCol, SCROW nStartRow, SCCOL nEndCol, SCROW nEndRow, SCCOL nFixPosX, SCROW nFixPosY ) { double fZoomFactor = (double)Fraction(nZoom,100); fScaleX *= fZoomFactor; fScaleY *= fZoomFactor; long nBlockX = 0; SCCOL nCol; for (nCol=0; nColGetColWidth( nCol, nTab ); if (nColTwips) { nBlockX += (long)(nColTwips * fScaleX); if (nBlockX > nWindowX) return false; } } for (nCol=nStartCol; nCol<=nEndCol; nCol++) { sal_uInt16 nColTwips = pDoc->GetColWidth( nCol, nTab ); if (nColTwips) { nBlockX += (long)(nColTwips * fScaleX); if (nBlockX > nWindowX) return false; } } long nBlockY = 0; for (SCROW nRow = 0; nRow <= nFixPosY-1; ++nRow) { if (pDoc->RowHidden(nRow, nTab)) continue; // for frozen panes, add both parts sal_uInt16 nRowTwips = pDoc->GetRowHeight(nRow, nTab); if (nRowTwips) { nBlockY += (long)(nRowTwips * fScaleY); if (nBlockY > nWindowY) return false; } } for (SCROW nRow = nStartRow; nRow <= nEndRow; ++nRow) { sal_uInt16 nRowTwips = pDoc->GetRowHeight(nRow, nTab); if (nRowTwips) { nBlockY += (long)(nRowTwips * fScaleY); if (nBlockY > nWindowY) return false; } } return true; } sal_uInt16 ScTabView::CalcZoom( SvxZoomType eType, sal_uInt16 nOldZoom ) { sal_uInt16 nZoom = 0; // Ergebnis switch ( eType ) { case SVX_ZOOM_PERCENT: // rZoom ist kein besonderer prozentualer Wert nZoom = nOldZoom; break; case SVX_ZOOM_OPTIMAL: // nZoom entspricht der optimalen Gr"o\se { ScMarkData& rMark = aViewData.GetMarkData(); ScDocument* pDoc = aViewData.GetDocument(); if (!rMark.IsMarked() && !rMark.IsMultiMarked()) nZoom = 100; // nothing selected else { SCTAB nTab = aViewData.GetTabNo(); ScRange aMarkRange; if ( aViewData.GetSimpleArea( aMarkRange ) != SC_MARK_SIMPLE ) rMark.GetMultiMarkArea( aMarkRange ); SCCOL nStartCol = aMarkRange.aStart.Col(); SCROW nStartRow = aMarkRange.aStart.Row(); SCTAB nStartTab = aMarkRange.aStart.Tab(); SCCOL nEndCol = aMarkRange.aEnd.Col(); SCROW nEndRow = aMarkRange.aEnd.Row(); SCTAB nEndTab = aMarkRange.aEnd.Tab(); if ( nTab < nStartTab && nTab > nEndTab ) nTab = nStartTab; ScSplitPos eUsedPart = aViewData.GetActivePart(); SCCOL nFixPosX = 0; SCROW nFixPosY = 0; if ( aViewData.GetHSplitMode() == SC_SPLIT_FIX ) { // use right part eUsedPart = (WhichV(eUsedPart)==SC_SPLIT_TOP) ? SC_SPLIT_TOPRIGHT : SC_SPLIT_BOTTOMRIGHT; nFixPosX = aViewData.GetFixPosX(); if ( nStartCol < nFixPosX ) nStartCol = nFixPosX; } if ( aViewData.GetVSplitMode() == SC_SPLIT_FIX ) { // use bottom part eUsedPart = (WhichH(eUsedPart)==SC_SPLIT_LEFT) ? SC_SPLIT_BOTTOMLEFT : SC_SPLIT_BOTTOMRIGHT; nFixPosY = aViewData.GetFixPosY(); if ( nStartRow < nFixPosY ) nStartRow = nFixPosY; } if (pGridWin[eUsedPart]) { // Because scale is rounded to pixels, the only reliable way to find // the right scale is to check if a zoom fits Size aWinSize = pGridWin[eUsedPart]->GetOutputSizePixel(); // for frozen panes, use sum of both parts for calculation if ( nFixPosX != 0 ) aWinSize.Width() += GetGridWidth( SC_SPLIT_LEFT ); if ( nFixPosY != 0 ) aWinSize.Height() += GetGridHeight( SC_SPLIT_TOP ); ScDocShell* pDocSh = aViewData.GetDocShell(); double nPPTX = ScGlobal::nScreenPPTX / pDocSh->GetOutputFactor(); double nPPTY = ScGlobal::nScreenPPTY; sal_uInt16 nMin = MINZOOM; sal_uInt16 nMax = MAXZOOM; while ( nMax > nMin ) { sal_uInt16 nTest = (nMin+nMax+1)/2; if ( lcl_FitsInWindow( nPPTX, nPPTY, nTest, aWinSize.Width(), aWinSize.Height(), pDoc, nTab, nStartCol, nStartRow, nEndCol, nEndRow, nFixPosX, nFixPosY ) ) nMin = nTest; else nMax = nTest-1; } OSL_ENSURE( nMin == nMax, "Schachtelung ist falsch" ); nZoom = nMin; if ( nZoom != nOldZoom ) { // scroll to block only in active split part // (the part for which the size was calculated) if ( nStartCol <= nEndCol ) aViewData.SetPosX( WhichH(eUsedPart), nStartCol ); if ( nStartRow <= nEndRow ) aViewData.SetPosY( WhichV(eUsedPart), nStartRow ); } } } } break; case SVX_ZOOM_WHOLEPAGE: // nZoom entspricht der ganzen Seite oder case SVX_ZOOM_PAGEWIDTH: // nZoom entspricht der Seitenbreite { SCTAB nCurTab = aViewData.GetTabNo(); ScDocument* pDoc = aViewData.GetDocument(); ScStyleSheetPool* pStylePool = pDoc->GetStyleSheetPool(); SfxStyleSheetBase* pStyleSheet = pStylePool->Find( pDoc->GetPageStyle( nCurTab ), SFX_STYLE_FAMILY_PAGE ); OSL_ENSURE( pStyleSheet, "PageStyle not found :-/" ); if ( pStyleSheet ) { ScPrintFunc aPrintFunc( aViewData.GetDocShell(), aViewData.GetViewShell()->GetPrinter(true), nCurTab ); Size aPageSize = aPrintFunc.GetDataSize(); // use the size of the largest GridWin for normal split, // or both combined for frozen panes, with the (document) size // of the frozen part added to the page size // (with frozen panes, the size of the individual parts // depends on the scale that is to be calculated) if ( !pGridWin[SC_SPLIT_BOTTOMLEFT] ) return 0; Size aWinSize = pGridWin[SC_SPLIT_BOTTOMLEFT]->GetOutputSizePixel(); ScSplitMode eHMode = aViewData.GetHSplitMode(); if ( eHMode != SC_SPLIT_NONE && pGridWin[SC_SPLIT_BOTTOMRIGHT] ) { long nOtherWidth = pGridWin[SC_SPLIT_BOTTOMRIGHT]-> GetOutputSizePixel().Width(); if ( eHMode == SC_SPLIT_FIX ) { aWinSize.Width() += nOtherWidth; for ( SCCOL nCol = aViewData.GetPosX(SC_SPLIT_LEFT); nCol < aViewData.GetFixPosX(); nCol++ ) aPageSize.Width() += pDoc->GetColWidth( nCol, nCurTab ); } else if ( nOtherWidth > aWinSize.Width() ) aWinSize.Width() = nOtherWidth; } ScSplitMode eVMode = aViewData.GetVSplitMode(); if ( eVMode != SC_SPLIT_NONE && pGridWin[SC_SPLIT_TOPLEFT] ) { long nOtherHeight = pGridWin[SC_SPLIT_TOPLEFT]-> GetOutputSizePixel().Height(); if ( eVMode == SC_SPLIT_FIX ) { aWinSize.Height() += nOtherHeight; aPageSize.Height() += pDoc->GetRowHeight( aViewData.GetPosY(SC_SPLIT_TOP), aViewData.GetFixPosY()-1, nCurTab); } else if ( nOtherHeight > aWinSize.Height() ) aWinSize.Height() = nOtherHeight; } double nPPTX = ScGlobal::nScreenPPTX / aViewData.GetDocShell()->GetOutputFactor(); double nPPTY = ScGlobal::nScreenPPTY; long nZoomX = (long) ( aWinSize.Width() * 100 / ( aPageSize.Width() * nPPTX ) ); long nZoomY = (long) ( aWinSize.Height() * 100 / ( aPageSize.Height() * nPPTY ) ); long nNew = nZoomX; if (eType == SVX_ZOOM_WHOLEPAGE && nZoomY < nNew) nNew = nZoomY; nZoom = (sal_uInt16) nNew; } } break; default: OSL_FAIL("Unknown Zoom-Revision"); nZoom = 0; } return nZoom; } // wird z.B. gerufen, wenn sich das View-Fenster verschiebt: void ScTabView::StopMarking() { ScSplitPos eActive = aViewData.GetActivePart(); if (pGridWin[eActive]) pGridWin[eActive]->StopMarking(); ScHSplitPos eH = WhichH(eActive); if (pColBar[eH]) pColBar[eH]->StopMarking(); ScVSplitPos eV = WhichV(eActive); if (pRowBar[eV]) pRowBar[eV]->StopMarking(); } void ScTabView::HideNoteMarker() { for (sal_uInt16 i=0; i<4; i++) if (pGridWin[i] && pGridWin[i]->IsVisible()) pGridWin[i]->HideNoteMarker(); } void ScTabView::MakeDrawLayer() { if (!pDrawView) { aViewData.GetDocShell()->MakeDrawLayer(); // pDrawView wird per Notify gesetzt OSL_ENSURE(pDrawView,"ScTabView::MakeDrawLayer funktioniert nicht"); // #114409# for(sal_uInt16 a(0); a < 4; a++) { if(pGridWin[a]) { pGridWin[a]->DrawLayerCreated(); } } } } void ScTabView::ErrorMessage( sal_uInt16 nGlobStrId ) { if ( SC_MOD()->IsInExecuteDrop() ) { // #i28468# don't show error message when called from Drag&Drop, silently abort instead return; } StopMarking(); // falls per Focus aus MouseButtonDown aufgerufen Window* pParent = aViewData.GetDialogParent(); ScWaitCursorOff aWaitOff( pParent ); bool bFocus = pParent && pParent->HasFocus(); if(nGlobStrId==STR_PROTECTIONERR) { if(aViewData.GetDocShell()->IsReadOnly()) { nGlobStrId=STR_READONLYERR; } } InfoBox aBox( pParent, ScGlobal::GetRscString( nGlobStrId ) ); aBox.Execute(); if (bFocus) pParent->GrabFocus(); } void ScTabView::UpdatePageBreakData( bool bForcePaint ) { ScPageBreakData* pNewData = NULL; if (aViewData.IsPagebreakMode()) { ScDocShell* pDocSh = aViewData.GetDocShell(); ScDocument* pDoc = pDocSh->GetDocument(); SCTAB nTab = aViewData.GetTabNo(); sal_uInt16 nCount = pDoc->GetPrintRangeCount(nTab); if (!nCount) nCount = 1; pNewData = new ScPageBreakData(nCount); ScPrintFunc aPrintFunc( pDocSh, pDocSh->GetPrinter(), nTab, 0,0,NULL, NULL, pNewData ); // ScPrintFunc fuellt im ctor die PageBreakData if ( nCount > 1 ) { aPrintFunc.ResetBreaks(nTab); pNewData->AddPages(); } // Druckbereiche veraendert? if ( bForcePaint || ( pPageBreakData && !( *pPageBreakData == *pNewData ) ) ) PaintGrid(); } delete pPageBreakData; pPageBreakData = pNewData; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */