/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the LibreOffice project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include "analysisdefs.hxx"
#include "analysis.hxx"
#include "bessel.hxx"
#include <comphelper/random.hxx>
#include <cppuhelper/supportsservice.hxx>
#include <cppuhelper/weak.hxx>
#include <o3tl/any.hxx>
#include <rtl/math.hxx>
#include <sal/macros.h>
#include <unotools/resmgr.hxx>
#include <i18nlangtag/languagetag.hxx>
#include <algorithm>
#include <cmath>
#include <float.h>

constexpr OUStringLiteral ADDIN_SERVICE = u"com.sun.star.sheet.AddIn";
constexpr OUStringLiteral MY_SERVICE = u"com.sun.star.sheet.addin.Analysis";
constexpr OUStringLiteral MY_IMPLNAME = u"com.sun.star.sheet.addin.AnalysisImpl";

using namespace                 ::com::sun::star;
using namespace sca::analysis;

OUString AnalysisAddIn::GetFuncDescrStr(const TranslateId* pResId, sal_uInt16 nStrIndex)
{
    return AnalysisResId(pResId[nStrIndex - 1]);
}

void AnalysisAddIn::InitData()
{
    aResLocale = Translate::Create("sca", LanguageTag(aFuncLoc));

    pFD.reset(new FuncDataList);
    InitFuncDataList(*pFD);

    pDefLocales.reset();
}

AnalysisAddIn::AnalysisAddIn( const uno::Reference< uno::XComponentContext >& xContext ) :
    AnalysisAddIn_Base(m_aMutex),
    aAnyConv( xContext )
{
}

AnalysisAddIn::~AnalysisAddIn()
{
}

sal_Int32 AnalysisAddIn::getDateMode(
        const uno::Reference< beans::XPropertySet >& xPropSet,
        const uno::Any& rAny )
{
    sal_Int32 nMode = aAnyConv.getInt32( xPropSet, rAny, 0 );
    if( (nMode < 0) || (nMode > 4) )
        throw lang::IllegalArgumentException();
    return nMode;
}

#define MAXFACTDOUBLE   300

double AnalysisAddIn::FactDouble( sal_Int32 nNum )
{
    if( nNum < 0 || nNum > MAXFACTDOUBLE )
        throw lang::IllegalArgumentException();

    if( !pFactDoubles )
    {
        pFactDoubles.reset( new double[ MAXFACTDOUBLE + 1 ] );

        pFactDoubles[ 0 ] = 1.0;    // by default

        double      fOdd = 1.0;
        double      fEven = 2.0;

        pFactDoubles[ 1 ] = fOdd;
        pFactDoubles[ 2 ] = fEven;

        bool    bOdd = true;

        for( sal_uInt16 nCnt = 3 ; nCnt <= MAXFACTDOUBLE ; nCnt++ )
        {
            if( bOdd )
            {
                fOdd *= nCnt;
                pFactDoubles[ nCnt ] = fOdd;
            }
            else
            {
                fEven *= nCnt;
                pFactDoubles[ nCnt ] = fEven;
            }

            bOdd = !bOdd;

        }
    }

    return pFactDoubles[ nNum ];
}

// XServiceName
OUString SAL_CALL AnalysisAddIn::getServiceName()
{
    // name of specific AddIn service
    return MY_SERVICE;
}

// XServiceInfo
OUString SAL_CALL AnalysisAddIn::getImplementationName()
{
    return MY_IMPLNAME;
}

sal_Bool SAL_CALL AnalysisAddIn::supportsService( const OUString& aName )
{
    return cppu::supportsService(this, aName);
}

uno::Sequence< OUString > SAL_CALL AnalysisAddIn::getSupportedServiceNames()
{
    return { ADDIN_SERVICE, MY_SERVICE };
}

// XLocalizable
void SAL_CALL AnalysisAddIn::setLocale( const lang::Locale& eLocale )
{
    aFuncLoc = eLocale;

    InitData();     // change of locale invalidates resources!
}

lang::Locale SAL_CALL AnalysisAddIn::getLocale()
{
    return aFuncLoc;
}

// XAddIn
OUString SAL_CALL AnalysisAddIn::getProgrammaticFuntionName( const OUString& )
{
    //  not used by calc
    //  (but should be implemented for other uses of the AddIn service)

    return OUString();
}

OUString SAL_CALL AnalysisAddIn::getDisplayFunctionName( const OUString& aProgrammaticName )
{
    OUString          aRet;

    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aProgrammaticName ) );
    if( it != pFD->end() )
    {
        aRet = AnalysisResId(it->GetUINameID());
        if( it->IsDouble() )
        {
            const OUString& rSuffix = it->GetSuffix();
            if (!rSuffix.isEmpty())
                aRet += rSuffix;
            else
                aRet += "_ADD";
        }
    }
    else
    {
        aRet = "UNKNOWNFUNC_" + aProgrammaticName;
    }

    return aRet;
}

OUString SAL_CALL AnalysisAddIn::getFunctionDescription( const OUString& aProgrammaticName )
{
    OUString          aRet;

    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aProgrammaticName ) );
    if( it != pFD->end() )
        aRet = GetFuncDescrStr( it->GetDescrID(), 1 );

    return aRet;
}

OUString SAL_CALL AnalysisAddIn::getDisplayArgumentName( const OUString& aName, sal_Int32 nArg )
{
    OUString          aRet;

    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aName ) );
    if( it != pFD->end() && nArg <= 0xFFFF )
    {
        sal_uInt16  nStr = it->GetStrIndex( sal_uInt16( nArg ) );
        if( nStr )
            aRet = GetFuncDescrStr( it->GetDescrID(), nStr );
        else
            aRet = "internal";
    }

    return aRet;
}

OUString SAL_CALL AnalysisAddIn::getArgumentDescription( const OUString& aName, sal_Int32 nArg )
{
    OUString          aRet;

    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aName ) );
    if( it != pFD->end() && nArg <= 0xFFFF )
    {
        sal_uInt16  nStr = it->GetStrIndex( sal_uInt16( nArg ) );
        if( nStr )
            aRet = GetFuncDescrStr( it->GetDescrID(), nStr + 1 );
        else
            aRet = "for internal use only";
    }

    return aRet;
}

constexpr OUStringLiteral pDefCatName = u"Add-In";

OUString SAL_CALL AnalysisAddIn::getProgrammaticCategoryName( const OUString& aName )
{
    //  return non-translated strings
    //  return OUString( "Add-In" );
    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aName ) );
    OUString              aRet;
    if( it != pFD->end() )
    {
        switch( it->GetCategory() )
        {
            case FDCategory::DateTime:    aRet = "Date&Time";         break;
            case FDCategory::Finance:     aRet = "Financial";         break;
            case FDCategory::Inf:         aRet = "Information";       break;
            case FDCategory::Math:        aRet = "Mathematical";      break;
            case FDCategory::Tech:        aRet = "Technical";         break;
        }
    }
    else
        aRet = pDefCatName;

    return aRet;
}

OUString SAL_CALL AnalysisAddIn::getDisplayCategoryName( const OUString& aProgrammaticFunctionName )
{
    //  return translated strings, not used for predefined categories
    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aProgrammaticFunctionName ) );
    OUString              aRet;
    if( it != pFD->end() )
    {
        switch( it->GetCategory() )
        {
            case FDCategory::DateTime:    aRet = "Date&Time";         break;
            case FDCategory::Finance:     aRet = "Financial";         break;
            case FDCategory::Inf:         aRet = "Information";       break;
            case FDCategory::Math:        aRet = "Mathematical";      break;
            case FDCategory::Tech:        aRet = "Technical";         break;
        }
    }
    else
        aRet = pDefCatName;

    return aRet;
}

static const char*          pLang[] = { "de", "en" };
static const char*          pCoun[] = { "DE", "US" };
const sal_uInt32     nNumOfLoc = SAL_N_ELEMENTS(pLang);

void AnalysisAddIn::InitDefLocales()
{
    pDefLocales.reset( new lang::Locale[ nNumOfLoc ] );

    for( sal_uInt32 n = 0 ; n < nNumOfLoc ; n++ )
    {
        pDefLocales[ n ].Language = OUString::createFromAscii( pLang[ n ] );
        pDefLocales[ n ].Country = OUString::createFromAscii( pCoun[ n ] );
    }
}

inline const lang::Locale& AnalysisAddIn::GetLocale( sal_uInt32 nInd )
{
    if( !pDefLocales )
        InitDefLocales();

    if( nInd < nNumOfLoc )
        return pDefLocales[ nInd ];
    else
        return aFuncLoc;
}

uno::Sequence< sheet::LocalizedName > SAL_CALL AnalysisAddIn::getCompatibilityNames( const OUString& aProgrammaticName )
{
    auto it = std::find_if(pFD->begin(), pFD->end(), FindFuncData( aProgrammaticName ) );
    if( it == pFD->end() )
        return uno::Sequence< sheet::LocalizedName >( 0 );

    const std::vector<OUString>& r = it->GetCompNameList();
    sal_uInt32                   nCount = r.size();

    uno::Sequence< sheet::LocalizedName >                aRet( nCount );

    sheet::LocalizedName*  pArray = aRet.getArray();

    for( sal_uInt32 n = 0 ; n < nCount ; n++ )
    {
        pArray[ n ] = sheet::LocalizedName( GetLocale( n ), r[n] );
    }

    return aRet;
}

// XAnalysis
/** Workday */
sal_Int32 SAL_CALL AnalysisAddIn::getWorkday( const uno::Reference< beans::XPropertySet >& xOptions,
    sal_Int32 nDate, sal_Int32 nDays, const uno::Any& aHDay )
{
    if( !nDays )
        return nDate;

    sal_Int32                   nNullDate = GetNullDate( xOptions );

    SortedIndividualInt32List   aSrtLst;

    aSrtLst.InsertHolidayList( aAnyConv, xOptions, aHDay, nNullDate );

    sal_Int32                   nActDate = nDate + nNullDate;

    if( nDays > 0 )
    {
        if( GetDayOfWeek( nActDate ) == 5 )
            // when starting on Saturday, assuming we're starting on Sunday to get the jump over the weekend
            nActDate++;

        while( nDays )
        {
            nActDate++;

            if( GetDayOfWeek( nActDate ) < 5 )
            {
                if( !aSrtLst.Find( nActDate ) )
                    nDays--;
            }
            else
                nActDate++;     // jump over weekend
        }
    }
    else
    {
        if( GetDayOfWeek( nActDate ) == 6 )
            // when starting on Sunday, assuming we're starting on Saturday to get the jump over the weekend
            nActDate--;

        while( nDays )
        {
            nActDate--;

            if( GetDayOfWeek( nActDate ) < 5 )
            {
                if( !aSrtLst.Find( nActDate ) )
                    nDays++;
            }
            else
                nActDate--;     // jump over weekend
        }
    }

    return nActDate - nNullDate;
}

/** Yearfrac */
double SAL_CALL AnalysisAddIn::getYearfrac( const uno::Reference< beans::XPropertySet >& xOpt,
    sal_Int32 nStartDate, sal_Int32 nEndDate, const uno::Any& rMode )
{
    double fRet = GetYearFrac( xOpt, nStartDate, nEndDate, getDateMode( xOpt, rMode ) );
    return finiteOrThrow( fRet );
}

sal_Int32 SAL_CALL AnalysisAddIn::getEdate( const uno::Reference< beans::XPropertySet >& xOpt, sal_Int32 nStartDate, sal_Int32 nMonths )
{
    sal_Int32 nNullDate = GetNullDate( xOpt );
    ScaDate aDate( nNullDate, nStartDate, 5 );
    aDate.addMonths( nMonths );
    return aDate.getDate( nNullDate );
}

sal_Int32 SAL_CALL AnalysisAddIn::getWeeknum( const uno::Reference< beans::XPropertySet >& xOpt, sal_Int32 nDate, sal_Int32 nMode )
{
    nDate += GetNullDate( xOpt );

    sal_uInt16  nDay, nMonth, nYear;
    DaysToDate( nDate, nDay, nMonth, nYear );

    sal_Int32   nFirstInYear = DateToDays( 1, 1, nYear );
    sal_uInt16  nFirstDayInYear = GetDayOfWeek( nFirstInYear );

    return ( nDate - nFirstInYear + ( ( nMode == 1 )? ( nFirstDayInYear + 1 ) % 7 : nFirstDayInYear ) ) / 7 + 1;
}

sal_Int32 SAL_CALL AnalysisAddIn::getEomonth( const uno::Reference< beans::XPropertySet >& xOpt, sal_Int32 nDate, sal_Int32 nMonths )
{
    sal_Int32   nNullDate = GetNullDate( xOpt );
    nDate += nNullDate;
    sal_uInt16  nDay, nMonth, nYear;
    DaysToDate( nDate, nDay, nMonth, nYear );

    sal_Int32   nNewMonth = nMonth + nMonths;

    if( nNewMonth > 12 )
    {
        nYear = sal::static_int_cast<sal_uInt16>( nYear + ( nNewMonth / 12 ) );
        nNewMonth %= 12;
    }
    else if( nNewMonth < 1 )
    {
        nNewMonth = -nNewMonth;
        nYear = sal::static_int_cast<sal_uInt16>( nYear - ( nNewMonth / 12 ) );
        nYear--;
        nNewMonth %= 12;
        nNewMonth = 12 - nNewMonth;
    }

    return DateToDays( DaysInMonth( sal_uInt16( nNewMonth ), nYear ), sal_uInt16( nNewMonth ), nYear ) - nNullDate;
}

sal_Int32 SAL_CALL AnalysisAddIn::getNetworkdays( const uno::Reference< beans::XPropertySet >& xOpt,
        sal_Int32 nStartDate, sal_Int32 nEndDate, const uno::Any& aHDay )
{
    sal_Int32                   nNullDate = GetNullDate( xOpt );

    SortedIndividualInt32List   aSrtLst;

    aSrtLst.InsertHolidayList( aAnyConv, xOpt, aHDay, nNullDate );

    sal_Int32                   nActDate = nStartDate + nNullDate;
    sal_Int32                   nStopDate = nEndDate + nNullDate;
    sal_Int32                   nCnt = 0;

    if( nActDate <= nStopDate )
    {
        while( nActDate <= nStopDate )
        {
            if( GetDayOfWeek( nActDate ) < 5 && !aSrtLst.Find( nActDate ) )
                nCnt++;

            nActDate++;
        }
    }
    else
    {
        while( nActDate >= nStopDate )
        {
            if( GetDayOfWeek( nActDate ) < 5 && !aSrtLst.Find( nActDate ) )
                nCnt--;

            nActDate--;
        }
    }

    return nCnt;
}

sal_Int32 SAL_CALL AnalysisAddIn::getIseven( sal_Int32 nVal )
{
    return ( nVal & 0x00000001 )? 0 : 1;
}

sal_Int32 SAL_CALL AnalysisAddIn::getIsodd( sal_Int32 nVal )
{
    return ( nVal & 0x00000001 )? 1 : 0;
}

double SAL_CALL
AnalysisAddIn::getMultinomial( const uno::Reference< beans::XPropertySet >& xOpt, const uno::Sequence< uno::Sequence< sal_Int32 > >& aVLst,
                               const uno::Sequence< uno::Any >& aOptVLst )
{
    ScaDoubleListGE0 aValList;

    aValList.Append( aVLst );
    aValList.Append( aAnyConv, xOpt, aOptVLst );

    if( aValList.Count() == 0 )
        return 0.0;

    double nZ = 0;
    double fRet = 1.0;

    for( sal_uInt32 i = 0; i < aValList.Count(); ++i )
    {
        const double d = aValList.Get(i);
        double n = (d >= 0.0) ? rtl::math::approxFloor( d ) : rtl::math::approxCeil( d );
        if ( n < 0.0 )
            throw lang::IllegalArgumentException();

        if( n > 0.0 )
        {
            nZ += n;
            fRet *= BinomialCoefficient(nZ, n);
        }
    }
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getSeriessum( double fX, double fN, double fM, const uno::Sequence< uno::Sequence< double > >& aCoeffList )
{
    double                          fRet = 0.0;

    // #i32269# 0^0 is undefined, Excel returns #NUM! error
    if( fX == 0.0 && fN == 0 )
        throw uno::RuntimeException("undefined expression: 0^0");

    if( fX != 0.0 )
    {
        for( const uno::Sequence< double >& rList : aCoeffList )
        {
            for( const double fCoef : rList )
            {
                fRet += fCoef * pow( fX, fN );

                fN += fM;
            }
        }
    }

    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getQuotient( double fNum, double fDenom )
{
    double fRet;
    if( (fNum < 0) != (fDenom < 0) )
        fRet = ::rtl::math::approxCeil( fNum / fDenom );
    else
        fRet = ::rtl::math::approxFloor( fNum / fDenom );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getMround( double fNum, double fMult )
{
    if( fMult == 0.0 )
        return fMult;

    double fRet = fMult * ::rtl::math::round( ::rtl::math::approxValue( fNum / fMult));
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getSqrtpi( double fNum )
{
    double fRet = sqrt( fNum * M_PI );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getRandbetween( double fMin, double fMax )
{
    fMin = ::rtl::math::round( fMin, 0, rtl_math_RoundingMode_Up );
    fMax = ::rtl::math::round( fMax, 0, rtl_math_RoundingMode_Up );
    if( fMin > fMax )
        throw lang::IllegalArgumentException();

    double fRet = floor(comphelper::rng::uniform_real_distribution(fMin, nextafter(fMax+1, -DBL_MAX)));
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getGcd( const uno::Reference< beans::XPropertySet >& xOpt, const uno::Sequence< uno::Sequence< double > >& aVLst, const uno::Sequence< uno::Any >& aOptVLst )
{
    ScaDoubleListGT0 aValList;

    aValList.Append( aVLst );
    aValList.Append( aAnyConv, xOpt, aOptVLst );

    if( aValList.Count() == 0 )
        return 0.0;

    double          f = aValList.Get(0);
    for( sal_uInt32 i = 1; i < aValList.Count(); ++i )
    {
        f = GetGcd( aValList.Get(i), f );
    }

    return finiteOrThrow( f );
}

double SAL_CALL AnalysisAddIn::getLcm( const uno::Reference< beans::XPropertySet >& xOpt, const uno::Sequence< uno::Sequence< double > >& aVLst, const uno::Sequence< uno::Any >& aOptVLst )
{
    ScaDoubleListGE0 aValList;

    aValList.Append( aVLst );
    aValList.Append( aAnyConv, xOpt, aOptVLst );

    if( aValList.Count() == 0 )
        return 0.0;

    double f = rtl::math::approxFloor( aValList.Get(0) );
    if( f < 0.0 )
        throw lang::IllegalArgumentException();

    if( f == 0.0 )
        return f;

    for( sal_uInt32 i = 1; i < aValList.Count(); ++i )
    {
        double fTmp = rtl::math::approxFloor( aValList.Get(i) );
        if( fTmp < 0.0 )
            throw lang::IllegalArgumentException();

        f = fTmp * f / GetGcd( fTmp, f );
        if( f == 0.0 )
            return f;
    }

    return finiteOrThrow( f );
}

double SAL_CALL AnalysisAddIn::getBesseli( double fNum, sal_Int32 nOrder )
{
    double fRet = sca::analysis::BesselI( fNum, nOrder );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getBesselj( double fNum, sal_Int32 nOrder )
{
    double fRet = sca::analysis::BesselJ( fNum, nOrder );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getBesselk( double fNum, sal_Int32 nOrder )
{
    if( nOrder < 0 || fNum <= 0.0 )
        throw lang::IllegalArgumentException();

    double fRet = sca::analysis::BesselK( fNum, nOrder );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getBessely( double fNum, sal_Int32 nOrder )
{
    if( nOrder < 0 || fNum <= 0.0 )
        throw lang::IllegalArgumentException();

    double fRet = sca::analysis::BesselY( fNum, nOrder );
    return finiteOrThrow( fRet );
}

const double    SCA_MAX2        = 511.0;            // min. val for binary numbers (9 bits + sign)
const double    SCA_MIN2        = -SCA_MAX2-1.0;    // min. val for binary numbers (9 bits + sign)
const double    SCA_MAX8        = 536870911.0;      // max. val for octal numbers (29 bits + sign)
const double    SCA_MIN8        = -SCA_MAX8-1.0;    // min. val for octal numbers (29 bits + sign)
const double    SCA_MAX16       = 549755813887.0;   // max. val for hexadecimal numbers (39 bits + sign)
const double    SCA_MIN16       = -SCA_MAX16-1.0;   // min. val for hexadecimal numbers (39 bits + sign)
const sal_Int32 SCA_MAXPLACES   = 10;               // max. number of places

OUString SAL_CALL AnalysisAddIn::getBin2Oct( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 2, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN8, SCA_MAX8, 8, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

double SAL_CALL AnalysisAddIn::getBin2Dec( const OUString& aNum )
{
    double fRet = ConvertToDec( aNum, 2, SCA_MAXPLACES );
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getBin2Hex( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 2, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN16, SCA_MAX16, 16, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

OUString SAL_CALL AnalysisAddIn::getOct2Bin( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 8, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN2, SCA_MAX2, 2, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

double SAL_CALL AnalysisAddIn::getOct2Dec( const OUString& aNum )
{
    double fRet = ConvertToDec( aNum, 8, SCA_MAXPLACES );
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getOct2Hex( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 8, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN16, SCA_MAX16, 16, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

OUString SAL_CALL AnalysisAddIn::getDec2Bin( const uno::Reference< beans::XPropertySet >& xOpt, sal_Int32 nNum, const uno::Any& rPlaces )
{
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( nNum, SCA_MIN2, SCA_MAX2, 2, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

OUString SAL_CALL AnalysisAddIn::getDec2Oct( const uno::Reference< beans::XPropertySet >& xOpt, sal_Int32 nNum, const uno::Any& rPlaces )
{
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( nNum, SCA_MIN8, SCA_MAX8, 8, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

OUString SAL_CALL AnalysisAddIn::getDec2Hex( const uno::Reference< beans::XPropertySet >& xOpt, double fNum, const uno::Any& rPlaces )
{
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fNum, SCA_MIN16, SCA_MAX16, 16, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

OUString SAL_CALL AnalysisAddIn::getHex2Bin( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 16, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN2, SCA_MAX2, 2, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

double SAL_CALL AnalysisAddIn::getHex2Dec( const OUString& aNum )
{
    double fRet = ConvertToDec( aNum, 16, SCA_MAXPLACES );
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getHex2Oct( const uno::Reference< beans::XPropertySet >& xOpt, const OUString& aNum, const uno::Any& rPlaces )
{
    double fVal = ConvertToDec( aNum, 16, SCA_MAXPLACES );
    sal_Int32 nPlaces = 0;
    bool bUsePlaces = aAnyConv.getInt32( nPlaces, xOpt, rPlaces );
    return ConvertFromDec( fVal, SCA_MIN8, SCA_MAX8, 8, nPlaces, SCA_MAXPLACES, bUsePlaces );
}

sal_Int32 SAL_CALL AnalysisAddIn::getDelta( const uno::Reference< beans::XPropertySet >& xOpt, double fNum1, const uno::Any& rNum2 )
{
    return sal_Int32(fNum1 == aAnyConv.getDouble( xOpt, rNum2, 0.0 ));
}

double SAL_CALL AnalysisAddIn::getErf( const uno::Reference< beans::XPropertySet >& xOpt, double fLL, const uno::Any& rUL )
{
    double fUL, fRet;
    bool bContainsValue = aAnyConv.getDouble( fUL, xOpt, rUL );

    fRet = bContainsValue ? (Erf( fUL ) - Erf( fLL )) : Erf( fLL );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getErfc( double f )
{
    double fRet = Erfc( f );
    return finiteOrThrow( fRet );
}

sal_Int32 SAL_CALL AnalysisAddIn::getGestep( const uno::Reference< beans::XPropertySet >& xOpt, double fNum, const uno::Any& rStep )
{
    return sal_Int32(fNum >= aAnyConv.getDouble( xOpt, rStep, 0.0 ));
}

double SAL_CALL AnalysisAddIn::getFactdouble( sal_Int32 nNum )
{
    double fRet = FactDouble( nNum );
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getImabs( const OUString& aNum )
{
    double fRet = Complex( aNum ).Abs();
    return finiteOrThrow( fRet );
}

double SAL_CALL AnalysisAddIn::getImaginary( const OUString& aNum )
{
    double fRet = Complex( aNum ).Imag();
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getImpower( const OUString& aNum, double f )
{
    Complex     z( aNum );

    z.Power( f );

    return z.GetString();
}

double SAL_CALL AnalysisAddIn::getImargument( const OUString& aNum )
{
    double fRet = Complex( aNum ).Arg();
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getImcos( const OUString& aNum )
{
    Complex     z( aNum );

    z.Cos();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImdiv( const OUString& aDivid, const OUString& aDivis )
{
    Complex     z( aDivid );

    z.Div( Complex( aDivis ) );

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImexp( const OUString& aNum )
{
    Complex     z( aNum );

    z.Exp();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImconjugate( const OUString& aNum )
{
    Complex     z( aNum );

    z.Conjugate();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImln( const OUString& aNum )
{
    Complex     z( aNum );

    z.Ln();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImlog10( const OUString& aNum )
{
    Complex     z( aNum );

    z.Log10();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImlog2( const OUString& aNum )
{
    Complex     z( aNum );

    z.Log2();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImproduct( const uno::Reference< beans::XPropertySet >&, const uno::Sequence< uno::Sequence< OUString > >& aNum1, const uno::Sequence< uno::Any >& aNL )
{
    ComplexList     z_list;

    z_list.Append( aNum1 );
    z_list.Append( aNL );

    if( z_list.empty() )
        return Complex( 0 ).GetString();

    Complex         z = z_list.Get(0);
    for( sal_uInt32 i = 1; i < z_list.Count(); ++i )
        z.Mult( z_list.Get(i) );

    return z.GetString();
}

double SAL_CALL AnalysisAddIn::getImreal( const OUString& aNum )
{
    double fRet = Complex( aNum ).Real();
    return finiteOrThrow( fRet );
}

OUString SAL_CALL AnalysisAddIn::getImsin( const OUString& aNum )
{
    Complex     z( aNum );

    z.Sin();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsub( const OUString& aNum1, const OUString& aNum2 )
{
    Complex     z( aNum1 );

    z.Sub( Complex( aNum2 ) );

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsum( const uno::Reference< beans::XPropertySet >&, const uno::Sequence< uno::Sequence< OUString > >& aNum1, const uno::Sequence< uno::Any >& aFollowingPars )
{
    ComplexList     z_list;

    z_list.Append( aNum1 );
    z_list.Append( aFollowingPars );

    if( z_list.empty() )
        return Complex( 0 ).GetString();

    Complex         z( z_list.Get(0) );
    for( sal_uInt32 i = 1; i < z_list.Count(); ++i )
        z.Add( z_list.Get(i) );

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsqrt( const OUString& aNum )
{
    Complex     z( aNum );

    z.Sqrt();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImtan( const OUString& aNum )
{
    Complex     z( aNum );

    z.Tan();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsec( const OUString& aNum )
{
    Complex     z( aNum );

    z.Sec();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImcsc( const OUString& aNum )
{
    Complex     z( aNum );

    z.Csc();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImcot( const OUString& aNum )
{
    Complex     z( aNum );

    z.Cot();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsinh( const OUString& aNum )
{
    Complex     z( aNum );

    z.Sinh();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImcosh( const OUString& aNum )
{
    Complex     z( aNum );

    z.Cosh();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImsech( const OUString& aNum )
{
    Complex     z( aNum );

    z.Sech();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getImcsch( const OUString& aNum )
{
    Complex     z( aNum );

    z.Csch();

    return z.GetString();
}

OUString SAL_CALL AnalysisAddIn::getComplex( double fR, double fI, const uno::Any& rSuff )
{
    bool    bi;

    switch( rSuff.getValueTypeClass() )
    {
        case uno::TypeClass_VOID:
            bi = true;
            break;
        case uno::TypeClass_STRING:
            {
            auto   pSuff = o3tl::forceAccess<OUString>(rSuff);
            bi = *pSuff == "i" || pSuff->isEmpty();
            if( !bi && *pSuff != "j" )
                throw lang::IllegalArgumentException();
            }
            break;
        default:
            throw lang::IllegalArgumentException();
    }

    return Complex( fR, fI, bi ? 'i' : 'j' ).GetString();
}

double SAL_CALL AnalysisAddIn::getConvert( double f, const OUString& aFU, const OUString& aTU )
{
    if( !pCDL )
        pCDL.reset(new ConvertDataList());

    double fRet = pCDL->Convert( f, aFU, aTU );
    return finiteOrThrow( fRet );
}

OUString AnalysisAddIn::AnalysisResId(TranslateId aResId)
{
    return Translate::get(aResId, aResLocale);
}

extern "C" SAL_DLLPUBLIC_EXPORT css::uno::XInterface*
scaddins_AnalysisAddIn_get_implementation(
    css::uno::XComponentContext* context, css::uno::Sequence<css::uno::Any> const&)
{
    return cppu::acquire(new AnalysisAddIn(context));
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */
4-2-3</option>
<option value='libreoffice-4-2-4'>libreoffice-4-2-4</option>
<option value='libreoffice-4-2-5'>libreoffice-4-2-5</option>
<option value='libreoffice-4-2-6'>libreoffice-4-2-6</option>
<option value='libreoffice-4-2-7'>libreoffice-4-2-7</option>
<option value='libreoffice-4-2-8'>libreoffice-4-2-8</option>
<option value='libreoffice-4-3'>libreoffice-4-3</option>
<option value='libreoffice-4-3-0'>libreoffice-4-3-0</option>
<option value='libreoffice-4-3-1'>libreoffice-4-3-1</option>
<option value='libreoffice-4-3-2'>libreoffice-4-3-2</option>
<option value='libreoffice-4-3-3'>libreoffice-4-3-3</option>
<option value='libreoffice-4-3-4'>libreoffice-4-3-4</option>
<option value='libreoffice-4-3-5'>libreoffice-4-3-5</option>
<option value='libreoffice-4-3-6'>libreoffice-4-3-6</option>
<option value='libreoffice-4-3-7'>libreoffice-4-3-7</option>
<option value='libreoffice-4-4'>libreoffice-4-4</option>
<option value='libreoffice-4-4-0'>libreoffice-4-4-0</option>
<option value='libreoffice-4-4-1'>libreoffice-4-4-1</option>
<option value='libreoffice-4-4-2'>libreoffice-4-4-2</option>
<option value='libreoffice-4-4-3'>libreoffice-4-4-3</option>
<option value='libreoffice-4-4-4'>libreoffice-4-4-4</option>
<option value='libreoffice-4-4-5'>libreoffice-4-4-5</option>
<option value='libreoffice-4-4-6'>libreoffice-4-4-6</option>
<option value='libreoffice-4-4-7'>libreoffice-4-4-7</option>
<option value='libreoffice-5-0'>libreoffice-5-0</option>
<option value='libreoffice-5-0-0'>libreoffice-5-0-0</option>
<option value='libreoffice-5-0-1'>libreoffice-5-0-1</option>
<option value='libreoffice-5-0-2'>libreoffice-5-0-2</option>
<option value='libreoffice-5-0-3'>libreoffice-5-0-3</option>
<option value='libreoffice-5-0-4'>libreoffice-5-0-4</option>
<option value='libreoffice-5-0-5'>libreoffice-5-0-5</option>
<option value='libreoffice-5-0-6'>libreoffice-5-0-6</option>
<option value='libreoffice-5-1'>libreoffice-5-1</option>
<option value='libreoffice-5-1-0'>libreoffice-5-1-0</option>
<option value='libreoffice-5-1-1'>libreoffice-5-1-1</option>
<option value='libreoffice-5-1-2'>libreoffice-5-1-2</option>
<option value='libreoffice-5-1-3'>libreoffice-5-1-3</option>
<option value='libreoffice-5-1-4'>libreoffice-5-1-4</option>
<option value='libreoffice-5-1-5'>libreoffice-5-1-5</option>
<option value='libreoffice-5-1-6'>libreoffice-5-1-6</option>
<option value='libreoffice-5-2'>libreoffice-5-2</option>
<option value='libreoffice-5-2-0'>libreoffice-5-2-0</option>
<option value='libreoffice-5-2-1'>libreoffice-5-2-1</option>
<option value='libreoffice-5-2-2'>libreoffice-5-2-2</option>
<option value='libreoffice-5-2-3'>libreoffice-5-2-3</option>
<option value='libreoffice-5-2-4'>libreoffice-5-2-4</option>
<option value='libreoffice-5-2-5'>libreoffice-5-2-5</option>
<option value='libreoffice-5-2-6'>libreoffice-5-2-6</option>
<option value='libreoffice-5-2-7'>libreoffice-5-2-7</option>
<option value='libreoffice-5-3'>libreoffice-5-3</option>
<option value='libreoffice-5-3-0'>libreoffice-5-3-0</option>
<option value='libreoffice-5-3-1'>libreoffice-5-3-1</option>
<option value='libreoffice-5-3-2'>libreoffice-5-3-2</option>
<option value='libreoffice-5-3-3'>libreoffice-5-3-3</option>
<option value='libreoffice-5-3-4'>libreoffice-5-3-4</option>
<option value='libreoffice-5-3-5'>libreoffice-5-3-5</option>
<option value='libreoffice-5-3-6'>libreoffice-5-3-6</option>
<option value='libreoffice-5-3-7'>libreoffice-5-3-7</option>
<option value='libreoffice-5-4'>libreoffice-5-4</option>
<option value='libreoffice-5-4-0'>libreoffice-5-4-0</option>
<option value='libreoffice-5-4-1'>libreoffice-5-4-1</option>
<option value='libreoffice-5-4-2'>libreoffice-5-4-2</option>
<option value='libreoffice-5-4-3'>libreoffice-5-4-3</option>
<option value='libreoffice-5-4-4'>libreoffice-5-4-4</option>
<option value='libreoffice-5-4-5'>libreoffice-5-4-5</option>
<option value='libreoffice-5-4-6'>libreoffice-5-4-6</option>
<option value='libreoffice-5-4-7'>libreoffice-5-4-7</option>
<option value='libreoffice-6-0'>libreoffice-6-0</option>
<option value='libreoffice-6-0-0'>libreoffice-6-0-0</option>
<option value='libreoffice-6-0-1'>libreoffice-6-0-1</option>
<option value='libreoffice-6-0-2'>libreoffice-6-0-2</option>
<option value='libreoffice-6-0-3'>libreoffice-6-0-3</option>
<option value='libreoffice-6-0-4'>libreoffice-6-0-4</option>
<option value='libreoffice-6-0-5'>libreoffice-6-0-5</option>
<option value='libreoffice-6-0-6'>libreoffice-6-0-6</option>
<option value='libreoffice-6-0-7'>libreoffice-6-0-7</option>
<option value='libreoffice-6-1'>libreoffice-6-1</option>
<option value='libreoffice-6-1-0'>libreoffice-6-1-0</option>
<option value='libreoffice-6-1-1'>libreoffice-6-1-1</option>
<option value='libreoffice-6-1-2'>libreoffice-6-1-2</option>
<option value='libreoffice-6-1-3'>libreoffice-6-1-3</option>
<option value='libreoffice-6-1-4'>libreoffice-6-1-4</option>
<option value='libreoffice-6-1-5'>libreoffice-6-1-5</option>
<option value='libreoffice-6-1-6'>libreoffice-6-1-6</option>
<option value='libreoffice-6-2'>libreoffice-6-2</option>
<option value='libreoffice-6-2-0'>libreoffice-6-2-0</option>
<option value='libreoffice-6-2-1'>libreoffice-6-2-1</option>
<option value='libreoffice-6-2-2'>libreoffice-6-2-2</option>
<option value='libreoffice-6-2-3'>libreoffice-6-2-3</option>
<option value='libreoffice-6-2-4'>libreoffice-6-2-4</option>
<option value='libreoffice-6-2-5'>libreoffice-6-2-5</option>
<option value='libreoffice-6-2-6'>libreoffice-6-2-6</option>
<option value='libreoffice-6-2-7'>libreoffice-6-2-7</option>
<option value='libreoffice-6-2-8'>libreoffice-6-2-8</option>
<option value='libreoffice-6-3'>libreoffice-6-3</option>
<option value='libreoffice-6-3-0'>libreoffice-6-3-0</option>
<option value='libreoffice-6-3-1'>libreoffice-6-3-1</option>
<option value='libreoffice-6-3-2'>libreoffice-6-3-2</option>
<option value='libreoffice-6-3-3'>libreoffice-6-3-3</option>
<option value='libreoffice-6-3-4'>libreoffice-6-3-4</option>
<option value='libreoffice-6-3-5'>libreoffice-6-3-5</option>
<option value='libreoffice-6-3-6'>libreoffice-6-3-6</option>
<option value='libreoffice-6-4'>libreoffice-6-4</option>
<option value='libreoffice-6-4-0'>libreoffice-6-4-0</option>
<option value='libreoffice-6-4-1'>libreoffice-6-4-1</option>
<option value='libreoffice-6-4-2'>libreoffice-6-4-2</option>
<option value='libreoffice-6-4-3'>libreoffice-6-4-3</option>
<option value='libreoffice-6-4-4'>libreoffice-6-4-4</option>
<option value='libreoffice-6-4-5'>libreoffice-6-4-5</option>
<option value='libreoffice-6-4-6'>libreoffice-6-4-6</option>
<option value='libreoffice-6-4-7'>libreoffice-6-4-7</option>
<option value='libreoffice-7-0'>libreoffice-7-0</option>
<option value='libreoffice-7-0-0'>libreoffice-7-0-0</option>
<option value='libreoffice-7-0-1'>libreoffice-7-0-1</option>
<option value='libreoffice-7-0-2'>libreoffice-7-0-2</option>
<option value='libreoffice-7-0-3'>libreoffice-7-0-3</option>
<option value='libreoffice-7-0-4'>libreoffice-7-0-4</option>
<option value='libreoffice-7-0-5'>libreoffice-7-0-5</option>
<option value='libreoffice-7-0-6'>libreoffice-7-0-6</option>
<option value='libreoffice-7-1'>libreoffice-7-1</option>
<option value='libreoffice-7-1-0'>libreoffice-7-1-0</option>
<option value='libreoffice-7-1-1'>libreoffice-7-1-1</option>
<option value='libreoffice-7-1-2'>libreoffice-7-1-2</option>
<option value='libreoffice-7-1-3'>libreoffice-7-1-3</option>
<option value='libreoffice-7-1-4'>libreoffice-7-1-4</option>
<option value='libreoffice-7-1-5'>libreoffice-7-1-5</option>
<option value='libreoffice-7-1-6'>libreoffice-7-1-6</option>
<option value='libreoffice-7-1-7'>libreoffice-7-1-7</option>
<option value='libreoffice-7-2'>libreoffice-7-2</option>
<option value='libreoffice-7-2-0'>libreoffice-7-2-0</option>
<option value='libreoffice-7-2-1'>libreoffice-7-2-1</option>
<option value='libreoffice-7-2-2'>libreoffice-7-2-2</option>
<option value='libreoffice-7-2-3'>libreoffice-7-2-3</option>
<option value='libreoffice-7-2-5'>libreoffice-7-2-5</option>
<option value='libreoffice-7-2-6'>libreoffice-7-2-6</option>
<option value='libreoffice-7-2-7'>libreoffice-7-2-7</option>
<option value='libreoffice-7-3'>libreoffice-7-3</option>
<option value='libreoffice-7-3-0'>libreoffice-7-3-0</option>
<option value='libreoffice-7-3-1'>libreoffice-7-3-1</option>
<option value='libreoffice-7-3-2'>libreoffice-7-3-2</option>
<option value='libreoffice-7-3-3'>libreoffice-7-3-3</option>
<option value='libreoffice-7-3-4'>libreoffice-7-3-4</option>
<option value='libreoffice-7-3-5'>libreoffice-7-3-5</option>
<option value='libreoffice-7-3-6'>libreoffice-7-3-6</option>
<option value='libreoffice-7-3-7'>libreoffice-7-3-7</option>
<option value='libreoffice-7-4'>libreoffice-7-4</option>
<option value='libreoffice-7-4-0'>libreoffice-7-4-0</option>
<option value='libreoffice-7-4-1'>libreoffice-7-4-1</option>
<option value='libreoffice-7-4-2'>libreoffice-7-4-2</option>
<option value='libreoffice-7-4-3'>libreoffice-7-4-3</option>
<option value='libreoffice-7-4-4'>libreoffice-7-4-4</option>
<option value='libreoffice-7-4-6'>libreoffice-7-4-6</option>
<option value='libreoffice-7-4-7'>libreoffice-7-4-7</option>
<option value='libreoffice-7-5'>libreoffice-7-5</option>
<option value='libreoffice-7-5-0'>libreoffice-7-5-0</option>
<option value='libreoffice-7-5-1'>libreoffice-7-5-1</option>
<option value='libreoffice-7-5-2'>libreoffice-7-5-2</option>
<option value='libreoffice-7-5-3'>libreoffice-7-5-3</option>
<option value='libreoffice-7-5-4'>libreoffice-7-5-4</option>
<option value='libreoffice-7-5-5'>libreoffice-7-5-5</option>
<option value='libreoffice-7-5-6'>libreoffice-7-5-6</option>
<option value='libreoffice-7-5-7'>libreoffice-7-5-7</option>
<option value='libreoffice-7-5-8'>libreoffice-7-5-8</option>
<option value='libreoffice-7-5-9'>libreoffice-7-5-9</option>
<option value='libreoffice-7-6'>libreoffice-7-6</option>
<option value='libreoffice-7-6-0'>libreoffice-7-6-0</option>
<option value='libreoffice-7-6-1'>libreoffice-7-6-1</option>
<option value='libreoffice-7-6-2'>libreoffice-7-6-2</option>
<option value='libreoffice-7-6-3'>libreoffice-7-6-3</option>
<option value='libreoffice-7-6-4'>libreoffice-7-6-4</option>
<option value='libreoffice-7-6-5'>libreoffice-7-6-5</option>
<option value='libreoffice-7-6-6'>libreoffice-7-6-6</option>
<option value='libreoffice-7-6-7'>libreoffice-7-6-7</option>
<option value='master' selected='selected'>master</option>
<option value='ports/macosx10.5/master'>ports/macosx10.5/master</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded'>private/Ashod/cd-5.3-3.2_import_unloaded</option>
<option value='private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink'>private/Ashod/cd-5.3-3.2_import_unloaded_share_GfxLink</option>
<option value='private/Ashod/cd-5.3.3.2'>private/Ashod/cd-5.3.3.2</option>
<option value='private/Ashod/cp-5.0-preinit'>private/Ashod/cp-5.0-preinit</option>
<option value='private/Ashod/fast-calc-rendering'>private/Ashod/fast-calc-rendering</option>
<option value='private/Ashod/pdfium'>private/Ashod/pdfium</option>
<option value='private/Ashod/pdfium_on_master'>private/Ashod/pdfium_on_master</option>
<option value='private/Ashod/pdfium_on_master_fixed'>private/Ashod/pdfium_on_master_fixed</option>
<option value='private/EL-SHREIF/ui_logger'>private/EL-SHREIF/ui_logger</option>
<option value='private/Minion3665/swf-export'>private/Minion3665/swf-export</option>
<option value='private/Rosemary/change-tracking'>private/Rosemary/change-tracking</option>
<option value='private/Sweetshark/killswclient'>private/Sweetshark/killswclient</option>
<option value='private/Sweetshark/lessdepend'>private/Sweetshark/lessdepend</option>
<option value='private/Sweetshark/multilistenerfix'>private/Sweetshark/multilistenerfix</option>
<option value='private/ajrhunt/c4'>private/ajrhunt/c4</option>
<option value='private/ajrhunt/cunit'>private/ajrhunt/cunit</option>
<option value='private/ajrhunt/cunitdemo'>private/ajrhunt/cunitdemo</option>
<option value='private/ajrhunt/firebird-improvement'>private/ajrhunt/firebird-improvement</option>
<option value='private/bansan/chardraw'>private/bansan/chardraw</option>
<option value='private/bubli/textboxchaining'>private/bubli/textboxchaining</option>
<option value='private/hcvcastro/preinit'>private/hcvcastro/preinit</option>
<option value='private/hcvcastro/undo-row-comment'>private/hcvcastro/undo-row-comment</option>
<option value='private/jmux/armin-strip-before-squash'>private/jmux/armin-strip-before-squash</option>
<option value='private/jmux/broken-static-win'>private/jmux/broken-static-win</option>
<option value='private/jmux/current-reorga'>private/jmux/current-reorga</option>
<option value='private/jmux/meson'>private/jmux/meson</option>
<option value='private/jmux/meson-gsoc-2021'>private/jmux/meson-gsoc-2021</option>
<option value='private/jmux/oss-fuzz'>private/jmux/oss-fuzz</option>
<option value='private/jmux/oss-fuzz-wip'>private/jmux/oss-fuzz-wip</option>
<option value='private/jmux/scheduler-fixes'>private/jmux/scheduler-fixes</option>
<option value='private/jmux/shape.odt'>private/jmux/shape.odt</option>
<option value='private/jmux/wasm-for-master'>private/jmux/wasm-for-master</option>
<option value='private/jmux/wasm-tmp'>private/jmux/wasm-tmp</option>
<option value='private/jmux/wasm_for_master_catchall'>private/jmux/wasm_for_master_catchall</option>
<option value='private/jmux/win-arm64'>private/jmux/win-arm64</option>
<option value='private/jmux/win-test-nohang'>private/jmux/win-test-nohang</option>
<option value='private/juergen/Tests'>private/juergen/Tests</option>
<option value='private/juergen/check-cjk'>private/juergen/check-cjk</option>
<option value='private/kendy/condformat-api'>private/kendy/condformat-api</option>
<option value='private/kendy/condformat-fdo82014'>private/kendy/condformat-fdo82014</option>
<option value='private/kendy/mailmerge-04'>private/kendy/mailmerge-04</option>
<option value='private/kendy/mailmerge-05'>private/kendy/mailmerge-05</option>
<option value='private/kendy/swinterpreter'>private/kendy/swinterpreter</option>
<option value='private/kendy/testcl'>private/kendy/testcl</option>
<option value='private/khaledhosny/color-fonts'>private/khaledhosny/color-fonts</option>
<option value='private/khaledhosny/vcl-cleanup-font'>private/khaledhosny/vcl-cleanup-font</option>
<option value='private/kohei/chart-bugs'>private/kohei/chart-bugs</option>
<option value='private/kohei/find-replace-all-perf'>private/kohei/find-replace-all-perf</option>
<option value='private/kohei/headless-perf'>private/kohei/headless-perf</option>
<option value='private/kohei/if-or-not-if-jump'>private/kohei/if-or-not-if-jump</option>
<option value='private/kohei/sort-ref-update'>private/kohei/sort-ref-update</option>
<option value='private/lfrb/opengl-vcl'>private/lfrb/opengl-vcl</option>
<option value='private/lgodard/calc_notes_import_export'>private/lgodard/calc_notes_import_export</option>
<option value='private/lgodard/tdf#117202'>private/lgodard/tdf#117202</option>
<option value='private/llunak/mailmerge'>private/llunak/mailmerge</option>
<option value='private/llunak/mailmerge_01'>private/llunak/mailmerge_01</option>
<option value='private/llunak/mailmerge_02'>private/llunak/mailmerge_02</option>
<option value='private/llunak/mailmerge_03'>private/llunak/mailmerge_03</option>
<option value='private/llunak/munich_12587'>private/llunak/munich_12587</option>
<option value='private/llunak/skia'>private/llunak/skia</option>
<option value='private/lmamane/basetest'>private/lmamane/basetest</option>
<option value='private/lmamane/for-julien2412'>private/lmamane/for-julien2412</option>
<option value='private/lmamane/for-julien2412-master'>private/lmamane/for-julien2412-master</option>
<option value='private/lmamane/tdf110997'>private/lmamane/tdf110997</option>
<option value='private/lmamane/timedate-controls-nanosecond'>private/lmamane/timedate-controls-nanosecond</option>
<option value='private/lmamane/validation'>private/lmamane/validation</option>
<option value='private/mcecchetti/23H1/a11y/paragraph'>private/mcecchetti/23H1/a11y/paragraph</option>
<option value='private/mcecchetti/accessibility/paragraph'>private/mcecchetti/accessibility/paragraph</option>
<option value='private/mcecchetti/amd/pdf-export-jpeg'>private/mcecchetti/amd/pdf-export-jpeg</option>
<option value='private/mcecchetti/bitmapcrc64'>private/mcecchetti/bitmapcrc64</option>
<option value='private/mcecchetti/bitmapcrc64-5-0'>private/mcecchetti/bitmapcrc64-5-0</option>
<option value='private/mcecchetti/calc-perf-unit-test'>private/mcecchetti/calc-perf-unit-test</option>
<option value='private/mcecchetti/calc-unit-test'>private/mcecchetti/calc-unit-test</option>
<option value='private/mcecchetti/gl-program-binary'>private/mcecchetti/gl-program-binary</option>
<option value='private/mert/wip_deepl'>private/mert/wip_deepl</option>
<option value='private/mikekaganski/multicolumn'>private/mikekaganski/multicolumn</option>
<option value='private/mmeeks/aafixes44'>private/mmeeks/aafixes44</option>
<option value='private/mmeeks/backports'>private/mmeeks/backports</option>
<option value='private/mmeeks/binarydatacache'>private/mmeeks/binarydatacache</option>
<option value='private/mmeeks/bitmapcrc64'>private/mmeeks/bitmapcrc64</option>
<option value='private/mmeeks/copy-paste'>private/mmeeks/copy-paste</option>
<option value='private/mmeeks/copypaste'>private/mmeeks/copypaste</option>
<option value='private/mmeeks/cp-6.2-bits'>private/mmeeks/cp-6.2-bits</option>
<option value='private/mmeeks/cp64merge'>private/mmeeks/cp64merge</option>
<option value='private/mmeeks/currency-dropdown'>private/mmeeks/currency-dropdown</option>
<option value='private/mmeeks/foo'>private/mmeeks/foo</option>
<option value='private/mmeeks/formula-iterator'>private/mmeeks/formula-iterator</option>
<option value='private/mmeeks/gldebug'>private/mmeeks/gldebug</option>
<option value='private/mmeeks/hidpi-bits'>private/mmeeks/hidpi-bits</option>
<option value='private/mmeeks/icontest'>private/mmeeks/icontest</option>
<option value='private/mmeeks/opengl-backbuffer'>private/mmeeks/opengl-backbuffer</option>
<option value='private/mmeeks/opengl-backbuffer2'>private/mmeeks/opengl-backbuffer2</option>
<option value='private/mmeeks/sandbox'>private/mmeeks/sandbox</option>
<option value='private/mmeeks/swapdatacontainer'>private/mmeeks/swapdatacontainer</option>
<option value='private/mmeeks/vcl-opengl3'>private/mmeeks/vcl-opengl3</option>
<option value='private/moggi/fix-opengl-context-problems'>private/moggi/fix-opengl-context-problems</option>
<option value='private/moggi/improved-dxf-xls-export'>private/moggi/improved-dxf-xls-export</option>
<option value='private/moggi/opengl-4-4-build-test'>private/moggi/opengl-4-4-build-test</option>
<option value='private/moggi/opengl-preparation'>private/moggi/opengl-preparation</option>
<option value='private/moggi/opengl-vcl-win'>private/moggi/opengl-vcl-win</option>
<option value='private/moggi/orcus-improvements'>private/moggi/orcus-improvements</option>
<option value='private/moggi/track-win-dc'>private/moggi/track-win-dc</option>
<option value='private/moggi/ui-test'>private/moggi/ui-test</option>
<option value='private/moggi/vcl-opengl3'>private/moggi/vcl-opengl3</option>
<option value='private/mst/sw_fieldmarkhide'>private/mst/sw_fieldmarkhide</option>
<option value='private/mst/sw_redlinehide'>private/mst/sw_redlinehide</option>
<option value='private/mst/sw_redlinehide_2'>private/mst/sw_redlinehide_2</option>
<option value='private/mst/sw_redlinehide_3'>private/mst/sw_redlinehide_3</option>
<option value='private/mst/sw_redlinehide_4a'>private/mst/sw_redlinehide_4a</option>
<option value='private/mst/sw_redlinehide_4b'>private/mst/sw_redlinehide_4b</option>
<option value='private/pranavk/modernize_gtktiledviewer'>private/pranavk/modernize_gtktiledviewer</option>
<option value='private/quwex/gsoc-box2d-experimental'>private/quwex/gsoc-box2d-experimental</option>
<option value='private/quwex/notespane-search'>private/quwex/notespane-search</option>
<option value='private/quwex/notespaneflat'>private/quwex/notespaneflat</option>
<option value='private/quwex/notespanesquashed'>private/quwex/notespanesquashed</option>
<option value='private/quwex/tdf59323'>private/quwex/tdf59323</option>
<option value='private/s.mehrbrodt/colorpicker-backport'>private/s.mehrbrodt/colorpicker-backport</option>
<option value='private/sweetshark/swdepend'>private/sweetshark/swdepend</option>
<option value='private/tbsdy/clipping'>private/tbsdy/clipping</option>
<option value='private/tbsdy/drawserverfontlayout'>private/tbsdy/drawserverfontlayout</option>
<option value='private/tbsdy/emf'>private/tbsdy/emf</option>
<option value='private/tbsdy/osl_getAllEnvironment'>private/tbsdy/osl_getAllEnvironment</option>
<option value='private/tbsdy/outdev'>private/tbsdy/outdev</option>
<option value='private/tbsdy/printinfomgr'>private/tbsdy/printinfomgr</option>
<option value='private/tbsdy/workbench'>private/tbsdy/workbench</option>
<option value='private/thb/libo-6-1+backports'>private/thb/libo-6-1+backports</option>
<option value='private/thb/libreoffice-5-2+backports'>private/thb/libreoffice-5-2+backports</option>
<option value='private/thb/sw_redlinehide-6-1'>private/thb/sw_redlinehide-6-1</option>
<option value='private/thb/tdf149754'>private/thb/tdf149754</option>
<option value='private/thb/wasm-upstreaming'>private/thb/wasm-upstreaming</option>
<option value='private/timar/cp-6.2-centos7'>private/timar/cp-6.2-centos7</option>
<option value='private/timar/fontconfigcrash'>private/timar/fontconfigcrash</option>
<option value='private/timar/pythonupgrademsp'>private/timar/pythonupgrademsp</option>
<option value='private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe'>private/tml/Use-the-iOS-French-and-Italian-dictionaries-for-othe</option>
<option value='private/tml/android-use-bionic-linker-copy'>private/tml/android-use-bionic-linker-copy</option>
<option value='private/tml/android-use-faulty.lib'>private/tml/android-use-faulty.lib</option>
<option value='private/tml/cp-6-4-28-1'>private/tml/cp-6-4-28-1</option>
<option value='private/tml/fixwintext'>private/tml/fixwintext</option>
<option value='private/tml/iculess'>private/tml/iculess</option>
<option value='private/tml/lov-6.1.5.2'>private/tml/lov-6.1.5.2</option>
<option value='private/tml/lov-6.2.1'>private/tml/lov-6.2.1</option>
<option value='private/tml/lov-7.0.3.3'>private/tml/lov-7.0.3.3</option>
<option value='private/tml/lov-7.0.4'>private/tml/lov-7.0.4</option>
<option value='private/tml/lov-7.1.2'>private/tml/lov-7.1.2</option>
<option value='private/tml/opencl-default-1'>private/tml/opencl-default-1</option>
<option value='private/tvajngerl/staging'>private/tvajngerl/staging</option>
<option value='ref/for/distro/collabora/cp-6.2'>ref/for/distro/collabora/cp-6.2</option>
</select> <input type='submit' value='switch'/></form></td></tr>
<tr><td class='sub'>LibreOffice 核心代码仓库</td><td class='sub right'>文档基金会</td></tr></table>
<table class='tabs'><tr><td>
<a href='/cgit/lo/core/'>summary</a><a href='/cgit/lo/core/refs/?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>refs</a><a class='active' href='/cgit/lo/core/log/oox/Library_oox.mk'>log</a><a href='/cgit/lo/core/tree/oox/Library_oox.mk?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>tree</a><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>commit</a><a href='/cgit/lo/core/diff/oox/Library_oox.mk?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>diff</a></td><td class='form'><form class='right' method='get' action='/cgit/lo/core/log/oox/Library_oox.mk'>
<input type='hidden' name='id' value='b20d44d301258ea99d7c20366d35f8fab8682e3b'/><select name='qt'>
<option value='grep'>log msg</option>
<option value='author'>author</option>
<option value='committer'>committer</option>
<option value='range'>range</option>
</select>
<input class='txt' type='search' size='10' name='q' value=''/>
<input type='submit' value='search'/>
</form>
</td></tr></table>
<div class='path'>path: <a href='/cgit/lo/core/log/?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>root</a>/<a href='/cgit/lo/core/log/oox?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>oox</a>/<a href='/cgit/lo/core/log/oox/Library_oox.mk?id=b20d44d301258ea99d7c20366d35f8fab8682e3b'>Library_oox.mk</a></div><div class='content'><table class='list nowrap'><tr class='nohover'><th class='left'>Age</th><th class='left'>Commit message (<a href='/cgit/lo/core/log/oox/Library_oox.mk?id=b20d44d301258ea99d7c20366d35f8fab8682e3b&amp;showmsg=1'>Expand</a>)</th><th class='left'>Author</th></tr>
<tr><td><span title='2023-08-02 21:22:43 +0200'>2023-08-02</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=c8d8bf4282cbd04abacfa69ba2cc0fa4300e35e1'>sc: theme color support for sparklines + ODF &amp; OOXML import/export</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2023-06-17 12:31:24 +0200'>2023-06-17</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=2fa7d4a88061a599b0ee29ac94c2515c9fdafc79'>oox, writerfilter, xmloff: use frozen data structures for static data</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2023-05-30 08:45:46 +0200'>2023-05-30</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=cf4a1c42d6a90ec73ab1504d4bfaf3004bad33da'>merge expwrap into sax library</a><span class='decoration'></span></td><td>Noel Grandin</td></tr>
<tr><td><span title='2023-01-17 08:35:27 +0000'>2023-01-17</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=0b471dc61b60180508d071a26e45b217ea65d13f'>docmodel appears twice in Library_oox.mk</a><span class='decoration'></span></td><td>Caolán McNamara</td></tr>
<tr><td><span title='2023-01-13 00:49:24 +0000'>2023-01-13</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=197e5f81213d14fdcbff40edf73385ecd4cd9815'>introduce {Char,Fill}ColorThemeReference which uses XThemeColor</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2023-01-12 23:15:58 +0000'>2023-01-12</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=bd0f526f2d3e1ffe43a74672485815768eee6e9e'>introduce docmodel comp., model::ThemeColor, use it in SvxColorItem</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2023-01-02 12:44:45 +0000'>2023-01-02</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=958d4667e361a1d8461889117ca830a5da85d0ee'>oox: add ThemeExport that exports a svx::Theme into theme.xml file</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2023-01-02 08:19:37 +0000'>2023-01-02</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=cbf30153a5c776e6d1ee26f2f83c8f77503eceb9'>tdf#125885 Conversion WordArt to Fontwork in docx import</a><span class='decoration'></span></td><td>Regina Henschel</td></tr>
<tr><td><span title='2023-01-01 23:35:17 +0000'>2023-01-01</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=312100003fc7cae358038aaec853584782c698f8'>sw: read theme from OOXML file and set it to the draw page</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2022-12-18 16:04:18 +0000'>2022-12-18</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=c3497353cabdef735dcebd66a8818ea117623dac'>Combine oox::FormulaIm-/ExportBase</a><span class='decoration'></span></td><td>Stephan Bergmann</td></tr>
<tr><td><span title='2022-04-18 15:55:12 +0200'>2022-04-18</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=2e9e057913d5f31490f62ad60d2bae39ae81afee'>oox: move DataTableConverter into own file</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2022-04-15 01:35:09 +0200'>2022-04-15</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=32e38ec654cfd467aad74da59366bd41142b3bdc'>oox: move DataTable{Context,Model} into own file, prop. "showKeys"</a><span class='decoration'></span></td><td>Tomaž Vajngerl</td></tr>
<tr><td><span title='2022-02-22 18:09:24 +0100'>2022-02-22</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=eaaf5ef8f99404797ffbb44ceeebf8795d85f07e'>Advanced Diagram support: first additions/reorganizations</a><span class='decoration'></span></td><td>Armin Le Grand (Allotropia)</td></tr>
<tr><td><span title='2022-01-20 12:28:54 +0100'>2022-01-20</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=02140554ee1d70b219a42546191e2219d58be4b0'>WASM --enable-wasm-strip now skips lots of LO code</a><span class='decoration'></span></td><td>Armin Le Grand (Allotropia)</td></tr>
<tr><td><span title='2021-12-10 08:14:24 +0100'>2021-12-10</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=db3a61cd958f4a70417929cf8e1fa9bfd0bfe5a3'>Generally determine Rdb content from gb_*_set_componentfile calls</a><span class='decoration'></span></td><td>Stephan Bergmann</td></tr>
<tr><td><span title='2021-06-23 12:57:40 +0200'>2021-06-23</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=63cd67e5e18f01aca303131e148c80398a181a41'>tdf#92525 tdf#142398: fix export of simple custom shapes</a><span class='decoration'></span></td><td>Attila Bakos (NISZ)</td></tr>
<tr><td><span title='2020-07-24 17:44:37 +0200'>2020-07-24</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=6ca5412bac9e3da5cd20f315fc853c7733f10858'>oox smartart: start parsing rule lists</a><span class='decoration'></span></td><td>Miklos Vajna</td></tr>
<tr><td><span title='2020-05-25 10:04:15 +0200'>2020-05-25</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=b9353394f46e46485fd148f2842f0c1e8e5322e3'>[MS-OFFCRYPTO] convert oox implementation into UNO service</a><span class='decoration'></span></td><td>Vasily Melenchuk</td></tr>
<tr><td><span title='2019-12-28 17:58:05 +0100'>2019-12-28</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=0f01ea20251c397b0acc1690baa2dc543d1fd91a'>Revert "tdf#46037: remove configurationhelper in oox/vbaproject"</a><span class='decoration'></span></td><td>Julien Nabet</td></tr>
<tr><td><span title='2019-12-23 07:41:13 +0100'>2019-12-23</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=276a90c6b3fb046df13ae85dcdec5f28f23ee527'>tdf#46037: remove configurationhelper in oox/vbaproject</a><span class='decoration'></span></td><td>Julien Nabet</td></tr>
<tr><td><span title='2019-10-04 08:57:29 +0200'>2019-10-04</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=dc34ab8105d9a3a0766a1cbd09b2eeb36fa8f2d2'>always use gb_LinkTarget__get_cxxflags for cxxobjects</a><span class='decoration'></span></td><td>Luboš Luňák</td></tr>
<tr><td><span title='2019-09-23 10:47:25 +0200'>2019-09-23</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=42af04bf2493508b481b3d6a32c71bd03fa7191b'>do not require $(SRCDIR) in every gb_Library_set_precompiled_header</a><span class='decoration'></span></td><td>Luboš Luňák</td></tr>
<tr><td><span title='2019-09-17 17:52:31 +0200'>2019-09-17</span></td><td><a href='/cgit/lo/core/commit/oox/Library_oox.mk?id=29855141a874fa2d0d36959af6ae765eb3a05408'>SmartArt: separate data model from diagram.cxx</a><span class='decoration'></span></td><td>Grzegorz Araminowicz</td></tr>