/*************************************************************************
*
* $RCSfile: drviews1.cxx,v $
*
* $Revision: 1.56 $
*
* last change: $Author: obo $ $Date: 2005-04-22 13:28:19 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#include "DrawViewShell.hxx"
#include "ViewShellImplementation.hxx"
#ifndef _COM_SUN_STAR_EMBED_EMBEDSTATES_HPP_
#include <com/sun/star/embed/EmbedStates.hpp>
#endif
#ifndef _SVXIDS_HRC
#include <svx/svxids.hrc>
#endif
#ifndef _SVDPAGV_HXX //autogen
#include <svx/svdpagv.hxx>
#endif
#ifndef _SFXVIEWFRM_HXX //autogen
#include <sfx2/viewfrm.hxx>
#endif
#ifndef _SFX_BINDINGS_HXX //autogen
#include <sfx2/bindings.hxx>
#endif
#ifndef _SVDOOLE2_HXX //autogen
#include <svx/svdoole2.hxx>
#endif
#ifndef _SFXDISPATCH_HXX //autogen
#include <sfx2/dispatch.hxx>
#endif
#ifndef _SV_SCRBAR_HXX //autogen
#include <vcl/scrbar.hxx>
#endif
#ifndef _SVDOGRAF_HXX //autogen
#include <svx/svdograf.hxx>
#endif
#ifndef _SVDOPAGE_HXX
#include <svx/svdopage.hxx>
#endif
#ifndef _SV_MSGBOX_HXX //autogen
#include <vcl/msgbox.hxx>
#endif
#include <sot/storage.hxx>
#ifndef _SVX_FMSHELL_HXX //autogen
#include <svx/fmshell.hxx>
#endif
#ifndef _E3D_GLOBL3D_HXX
#include <svx/globl3d.hxx>
#endif
#ifndef _SVX_FMGLOB_HXX
#include <svx/fmglob.hxx>
#endif
#ifndef _OUTLINER_HXX //autogen
#include <svx/outliner.hxx>
#endif
#pragma hdrstop
#include "misc.hxx"
#ifdef STARIMAGE_AVAILABLE
#ifndef _SIMDLL_HXX
#include <sim2/simdll.hxx>
#endif
#endif
#include <svx/dialogs.hrc>
#include "glob.hrc"
#include "app.hrc"
#include "res_bmp.hrc"
#include "strings.hrc"
#include "helpids.h"
#include "app.hxx"
#ifndef SD_FU_POOR_HXX
#include "fupoor.hxx"
#endif
#include "sdresid.hxx"
#ifndef SD_FU_SELECTION_HXX
#include "fusel.hxx"
#endif
#include "sdpage.hxx"
#ifndef SD_FRAME_VIEW_HXX
#include "FrameView.hxx"
#endif
#include "stlpool.hxx"
#ifndef SD_WINDOW_HXX
#include "Window.hxx"
#endif
#ifndef SD_DRAWVIEW_HXX
#include "drawview.hxx"
#endif
#include "drawdoc.hxx"
#include "DrawDocShell.hxx"
#include "Ruler.hxx"
#ifndef SD_CLIENT_HXX
#include "Client.hxx"
#endif
#ifndef _SD_SLIDESHOW_HXX
#include "slideshow.hxx"
#endif
#include "optsitem.hxx"
#ifndef SD_FU_SEARCH_HXX
#include "fusearch.hxx"
#endif
#ifndef SD_FU_SPELL_HXX
#include "fuspell.hxx"
#endif
#ifndef SD_OUTLINER_HXX
#include "Outliner.hxx"
#endif
#ifndef SD_ANIMATION_CHILD_WINDOW_HXX
#include "AnimationChildWindow.hxx"
#endif
#include "SdUnoDrawView.hxx"
#ifndef SD_OBJECT_BAR_MANAGER_HXX
#include "ObjectBarManager.hxx"
#endif
#ifndef SD_VIEW_SHELL_BASE_HXX
#include "ViewShellBase.hxx"
#endif
#ifndef SD_LAYER_DIALOG_CHILD_WINDOW_HXX
#include "LayerDialogChildWindow.hxx"
#endif
#include "LayerTabBar.hxx"
#include "ViewShellManager.hxx"
#include "UpdateLockManager.hxx"
#include "ViewShellHint.hxx"
#ifdef WNT
#pragma optimize ( "", off )
#endif
namespace {
static const ::rtl::OUString MASTER_VIEW_TOOL_BAR_NAME(
::rtl::OUString::createFromAscii("masterviewtoolbar"));
}
using namespace com::sun::star;
namespace sd {
/*************************************************************************
|*
|* Activate(), beim ersten Aufruf wird eine Shell fuer den Object Bar erzeugt
|*
\************************************************************************/
void DrawViewShell::Activate(BOOL bIsMDIActivate)
{
ViewShell::Activate(bIsMDIActivate);
if ( ! GetViewShellBase().GetUpdateLockManager().IsLocked())
{
// When no object bars are active then activate some.
ObjectBarManager& rObjectBarManager (GetObjectBarManager());
if (rObjectBarManager.GetTopObjectBarId() == snInvalidShellId)
rObjectBarManager.SwitchObjectBar (
rObjectBarManager.GetDefaultObjectBarId());
}
}
void DrawViewShell::UIActivating( SfxInPlaceClient* pCli )
{
ViewShell::UIActivating(pCli);
// #94252# Disable own controls
aTabControl.Disable();
if (GetLayerTabControl() != NULL)
GetLayerTabControl()->Disable();
}
void DrawViewShell::UIDeactivated( SfxInPlaceClient* pCli )
{
// #94252# Enable own controls
aTabControl.Enable();
if (GetLayerTabControl() != NULL)
GetLayerTabControl()->Enable();
ViewShell::UIDeactivated(pCli);
}
/*************************************************************************
|*
|* Deactivate()
|*
\************************************************************************/
void DrawViewShell::Deactivate(BOOL bIsMDIActivate)
{
if ( ! GetViewShellBase().GetUpdateLockManager().IsLocked())
{
}
ViewShell::Deactivate(bIsMDIActivate);
}
/*************************************************************************
|*
|* Wird gerufen, wenn sich der Selektionszustand der View aendert
|*
\************************************************************************/
void DrawViewShell::SelectionHasChanged (void)
{
ObjectBarManager & rObjectBarManager = GetObjectBarManager();
// Um die Performance zu steigern wird jetzt die komplette
// Shell invalidiert statt alle Slots einzeln
Invalidate();
//Update3DWindow(); // 3D-Controller
SfxBoolItem aItem( SID_3D_STATE, TRUE );
GetViewFrame()->GetDispatcher()->Execute(
SID_3D_STATE, SFX_CALLMODE_ASYNCHRON | SFX_CALLMODE_RECORD, &aItem, 0L );
SdrOle2Obj* pOleObj = NULL;
SdrGrafObj* pGrafObj = NULL;
if ( pDrView->AreObjectsMarked() )
{
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
if (rMarkList.GetMarkCount() == 1)
{
SdrMark* pMark = rMarkList.GetMark(0);
SdrObject* pObj = pMark->GetObj();
UINT32 nInv = pObj->GetObjInventor();
UINT16 nSdrObjKind = pObj->GetObjIdentifier();
if (nInv = SdrInventor && nSdrObjKind == OBJ_OLE2)
{
pOleObj = (SdrOle2Obj*) pObj;
UpdateIMapDlg( pObj );
}
else if (nSdrObjKind == OBJ_GRAF)
{
pGrafObj = (SdrGrafObj*) pObj;
UpdateIMapDlg( pObj );
}
}
}
ViewShellBase& rBase = GetViewShellBase();
Client* pIPClient = static_cast<Client*>(rBase.GetIPClient());
if ( pIPClient && pIPClient->IsObjectInPlaceActive() )
{
/**********************************************************************
* Ggf. OLE-Objekt beruecksichtigen und deaktivieren
**********************************************************************/
// this means we recently deselected an inplace active ole object so
// we need to deselect it now
if (!pOleObj)
{
pIPClient->GetObject()->changeState( embed::EmbedStates::RUNNING );
SFX_APP()->SetViewFrame( GetViewFrame() );
rBase.SetVerbs(0);
pDrView->ShowMarkHdl(NULL);
}
else
{
uno::Reference < embed::XEmbeddedObject > xObj = pOleObj->GetObjRef();
if ( xObj.is() )
{
rBase.SetVerbs( xObj->getSupportedVerbs() );
}
else
{
rBase.SetVerbs( uno::Sequence < embed::VerbDescriptor >() );
}
}
}
else
{
if ( pOleObj )
{
uno::Reference < embed::XEmbeddedObject > xObj = pOleObj->GetObjRef();
if ( xObj.is() )
{
rBase.SetVerbs( xObj->getSupportedVerbs() );
}
else
{
rBase.SetVerbs( uno::Sequence < embed::VerbDescriptor >() );
}
}
else
{
rBase.SetVerbs( uno::Sequence < embed::VerbDescriptor >() );
}
}
if( pFuActual )
{
pFuActual->SelectionHasChanged();
}
else
{
GetObjectBarManager().SelectionHasChanged (pDrView);
}
// #96124# Invalidate for every subshell
rObjectBarManager.InvalidateAllObjectBars();
if( SFX_APP()->GetHelpPI() )
SetHelpIdBySelection();
pDrView->UpdateSelectionClipboard( FALSE );
if (GetController() != NULL)
GetController()->FireSelectionChangeListener();
}
/*************************************************************************
|*
|* Zoomfaktor setzen
|*
\************************************************************************/
void DrawViewShell::SetZoom( long nZoom )
{
// Make sure that the zoom factor will not be recalculated on
// following window resizings.
bZoomOnPage = FALSE;
ViewShell::SetZoom( nZoom );
GetViewFrame()->GetBindings().Invalidate( SID_ATTR_ZOOM );
}
/*************************************************************************
|*
|* Zoomrechteck fuer aktives Fenster einstellen
|*
\************************************************************************/
void DrawViewShell::SetZoomRect( const Rectangle& rZoomRect )
{
ViewShell::SetZoomRect( rZoomRect );
GetViewFrame()->GetBindings().Invalidate( SID_ATTR_ZOOM );
}
/*************************************************************************
|*
|* PrepareClose, ggfs. Texteingabe beenden, damit andere Viewshells ein
|* aktualisiertes Textobjekt vorfinden
|*
\************************************************************************/
USHORT DrawViewShell::PrepareClose( BOOL bUI, BOOL bForBrowsing )
{
if ( ViewShell::PrepareClose(bUI, bForBrowsing) != TRUE )
return FALSE;
BOOL bRet = TRUE;
/*
if( pFuSlideShow )
{
pFuSlideShow->Terminate();
bRet = FALSE;
}
*/
if( bRet && pFuActual )
{
USHORT nID = pFuActual->GetSlotID();
if (nID == SID_TEXTEDIT || nID == SID_ATTR_CHAR)
{
pDrView->EndTextEdit();
}
}
else if( !bRet )
{
aCloseTimer.SetTimeoutHdl( LINK( this, DrawViewShell, CloseHdl ) );
aCloseTimer.SetTimeout( 20 );
aCloseTimer.Start();
}
return bRet;
}
/*************************************************************************
|*
|* Status (Enabled/Disabled) von Menue-SfxSlots setzen
|*
\************************************************************************/
void DrawViewShell::ChangeEditMode(EditMode eEMode, bool bIsLayerModeActive)
{
if (eEditMode != eEMode
|| mbIsLayerModeActive != bIsLayerModeActive)
{
ViewShellManager::UpdateLock aLock (GetViewShellBase().GetViewShellManager());
USHORT nActualPageNum = 0;
SdUnoDrawView* pController =
static_cast<SdUnoDrawView*>(GetController());
if (pController != NULL)
{
pController->FireChangeEditMode (eEMode == EM_MASTERPAGE);
pController->FireChangeLayerMode (bIsLayerModeActive);
}
if ( pDrView->IsTextEdit() )
{
pDrView->EndTextEdit();
}
LayerTabBar* pLayerBar = GetLayerTabControl();
if (pLayerBar != NULL)
pLayerBar->EndEditMode();
aTabControl.EndEditMode();
if (ePageKind == PK_HANDOUT)
{
// Bei Handzetteln nur MasterPage zulassen
eEMode = EM_MASTERPAGE;
}
eEditMode = eEMode;
mbIsLayerModeActive = bIsLayerModeActive;
// Determine whether to show the master view toolbar. The master
// page mode has to be active and the shell must not be a handout
// view.
bool bShowMasterViewToolbar (eEditMode == EM_MASTERPAGE
&& GetShellType() != ViewShell::ST_HANDOUT);
// If the master view toolbar is not shown we hide it before
// switching the edit mode.
if (mpImpl->mbIsInitialized
&& IsMainViewShell()
&& ! bShowMasterViewToolbar)
{
GetObjectBarManager().HideToolBar (MASTER_VIEW_TOOL_BAR_NAME);
}
if (eEditMode == EM_PAGE)
{
/******************************************************************
* PAGEMODE
******************************************************************/
aTabControl.Clear();
SdPage* pPage;
String aPageName;
USHORT nPageCnt = GetDoc()->GetSdPageCount(ePageKind);
for (USHORT i = 0; i < nPageCnt; i++)
{
pPage = GetDoc()->GetSdPage(i, ePageKind);
aPageName = pPage->GetName();
aTabControl.InsertPage(i + 1, aPageName);
if ( pPage->IsSelected() && nActualPageNum == 0 )
{
nActualPageNum = i;
}
}
aTabControl.SetCurPageId(nActualPageNum + 1);
SwitchPage(nActualPageNum);
}
else
{
/******************************************************************
* MASTERPAGE
******************************************************************/
GetViewFrame()->SetChildWindow(
AnimationChildWindow::GetChildWindowId(), FALSE );
if (!pActualPage)
{
// Sofern es keine pActualPage gibt, wird die erste genommen
pActualPage = GetDoc()->GetSdPage(0, ePageKind);
}
aTabControl.Clear();
USHORT nActualMasterPageNum = 0;
USHORT nMasterPageCnt = GetDoc()->GetMasterSdPageCount(ePageKind);
for (USHORT i = 0; i < nMasterPageCnt; i++)
{
SdPage* pMaster = GetDoc()->GetMasterSdPage(i, ePageKind);
String aLayoutName(pMaster->GetLayoutName());
aLayoutName.Erase(aLayoutName.SearchAscii(SD_LT_SEPARATOR));
aTabControl.InsertPage(i + 1, aLayoutName);
if (&(pActualPage->TRG_GetMasterPage()) == pMaster)
{
nActualMasterPageNum = i;
}
}
aTabControl.SetCurPageId(nActualMasterPageNum + 1);
SwitchPage(nActualMasterPageNum);
}
// If the master view toolbar is to be shown we turn it on after the
// edit mode has been changed.
if (mpImpl->mbIsInitialized
&& IsMainViewShell()
&& bShowMasterViewToolbar)
{
GetObjectBarManager().ShowToolBar (MASTER_VIEW_TOOL_BAR_NAME);
}
if ( ! mbIsLayerModeActive)
{
aTabControl.Show();
// Set the tab control only for draw pages. For master page
// this has been done already above.
if (eEditMode == EM_PAGE)
aTabControl.SetCurPageId (nActualPageNum + 1);
}
/*AF: The LayerDialogChildWindow is not used anymore (I hope).
if (GetViewFrame()->KnowsChildWindow(
LayerDialogChildWindow::GetChildWindowId()))
{
GetViewFrame()->SetChildWindow(
LayerDialogChildWindow::GetChildWindowId(),
IsLayerModeActive());
}
*/
ResetActualLayer();
Invalidate( SID_PAGEMODE );
Invalidate( SID_LAYERMODE );
Invalidate( SID_MASTERPAGE );
Invalidate( SID_SLIDE_MASTERPAGE );
Invalidate( SID_TITLE_MASTERPAGE );
Invalidate( SID_NOTES_MASTERPAGE );
Invalidate( SID_HANDOUT_MASTERPAGE );
}
}
bool DrawViewShell::IsLayerModeActive (void) const
{
return mbIsLayerModeActive;
}
/*************************************************************************
|*
|* Groesse des TabControls und der ModeButtons zurueckgeben
|*
\************************************************************************/
long DrawViewShell::GetHCtrlWidth()
{
// return aTabControl.GetSizePixel().Width();
return 0;
}
/*************************************************************************
|*
|* Horizontales Lineal erzeugen
|*
\************************************************************************/
SvxRuler* DrawViewShell::CreateHRuler (::sd::Window* pWin, BOOL bIsFirst)
{
Ruler* pRuler;
WinBits aWBits;
USHORT nFlags = SVXRULER_SUPPORT_OBJECT;
if ( bIsFirst )
{
aWBits = WB_HSCROLL | WB_3DLOOK | WB_BORDER | WB_EXTRAFIELD;
nFlags |= ( SVXRULER_SUPPORT_SET_NULLOFFSET |
SVXRULER_SUPPORT_TABS |
SVXRULER_SUPPORT_PARAGRAPH_MARGINS ); // Neu
}
else
aWBits = WB_HSCROLL | WB_3DLOOK | WB_BORDER;
pRuler = new Ruler (*this, GetParentWindow(), pWin, nFlags,
GetViewFrame()->GetBindings(), aWBits);
pRuler->SetSourceUnit(pWin->GetMapMode().GetMapUnit());
// Metric ...
UINT16 nMetric = GetDoc()->GetUIUnit();
if( nMetric == 0xffff )
nMetric = GetModuleFieldUnit();
pRuler->SetUnit( FieldUnit( nMetric ) );
// ... und auch DefTab am Lineal einstellen
pRuler->SetDefTabDist( GetDoc()->GetDefaultTabulator() ); // Neu
Fraction aUIScale(pWin->GetMapMode().GetScaleX());
aUIScale *= GetDoc()->GetUIScale();
pRuler->SetZoom(aUIScale);
return pRuler;
}
/*************************************************************************
|*
|* Vertikales Lineal erzeugen
|*
\************************************************************************/
SvxRuler* DrawViewShell::CreateVRuler(::sd::Window* pWin)
{
Ruler* pRuler;
WinBits aWBits = WB_VSCROLL | WB_3DLOOK | WB_BORDER;
USHORT nFlags = SVXRULER_SUPPORT_OBJECT;
pRuler = new Ruler(*this, GetParentWindow(), pWin, nFlags,
GetViewFrame()->GetBindings(), aWBits);
pRuler->SetSourceUnit(pWin->GetMapMode().GetMapUnit());
// #96629# Metric same as HRuler, use document setting
UINT16 nMetric = GetDoc()->GetUIUnit();
if( nMetric == 0xffff )
nMetric = GetModuleFieldUnit();
pRuler->SetUnit( FieldUnit( nMetric ) );
Fraction aUIScale(pWin->GetMapMode().GetScaleY());
aUIScale *= GetDoc()->GetUIScale();
pRuler->SetZoom(aUIScale);
return pRuler;
}
/*************************************************************************
|*
|* Horizontales Lineal aktualisieren
|*
\************************************************************************/
void DrawViewShell::UpdateHRuler()
{
Invalidate( SID_ATTR_LONG_LRSPACE );
Invalidate( SID_RULER_PAGE_POS );
Invalidate( SID_RULER_OBJECT );
Invalidate( SID_RULER_TEXT_RIGHT_TO_LEFT );
if (mpHorizontalRuler.get() != NULL)
mpHorizontalRuler->ForceUpdate();
}
/*************************************************************************
|*
|* Vertikales Lineal aktualisieren
|*
\************************************************************************/
void DrawViewShell::UpdateVRuler()
{
Invalidate( SID_ATTR_LONG_LRSPACE );
Invalidate( SID_RULER_PAGE_POS );
Invalidate( SID_RULER_OBJECT );
if (mpVerticalRuler.get() != NULL)
mpVerticalRuler->ForceUpdate();
}
/*************************************************************************
|*
|* Metrik setzen
|*
\************************************************************************/
void DrawViewShell::SetUIUnit(FieldUnit eUnit)
{
ViewShell::SetUIUnit(eUnit);
}
/*************************************************************************
|*
|* TabControl nach Splitteraenderung aktualisieren
|*
\************************************************************************/
IMPL_LINK( DrawViewShell, TabSplitHdl, TabBar *, pTab )
{
const long int nMax = aViewSize.Width() - aScrBarWH.Width()
- aTabControl.GetPosPixel().X() ;
Size aTabSize = aTabControl.GetSizePixel();
aTabSize.Width() = Min(pTab->GetSplitSize(), (long)(nMax-1));
aTabControl.SetSizePixel(aTabSize);
GetLayerTabControl()->SetSizePixel(aTabSize);
Point aPos = aTabControl.GetPosPixel();
aPos.X() += aTabSize.Width();
Size aScrSize(nMax - aTabSize.Width(), aScrBarWH.Height());
mpHorizontalScrollBar->SetPosSizePixel(aPos, aScrSize);
return 0;
}
/// inherited from sd::ViewShell
SdPage* DrawViewShell::getCurrentPage() const
{
const sal_Int32 nPageCount = (eEditMode == EM_PAGE)?
GetDoc()->GetSdPageCount(ePageKind):
GetDoc()->GetMasterSdPageCount(ePageKind);
sal_Int32 nCurrentPage = aTabControl.GetCurPageId() - 1;
DBG_ASSERT( (nPageCount>0) && (nCurrentPage<nPageCount), "sd::DrawViewShell::getCurrentPage(), illegal page index!" );
if( (nPageCount < 0) || (nCurrentPage>=nPageCount) )
nCurrentPage = 0; // play safe here
if (eEditMode == EM_PAGE)
{
return GetDoc()->GetSdPage(nCurrentPage, ePageKind);
}
else // EM_MASTERPAGE
{
return GetDoc()->GetMasterSdPage(nCurrentPage, ePageKind);
}
}
/*************************************************************************
|*
|* neue aktuelle Seite auswaehlen, falls sich die Seitenfolge geaendert
|* hat (z. B. durch Undo)
|*
\************************************************************************/
void DrawViewShell::ResetActualPage()
{
USHORT nCurrentPage = aTabControl.GetCurPageId() - 1;
USHORT nPageCount = (eEditMode == EM_PAGE)?GetDoc()->GetSdPageCount(ePageKind):GetDoc()->GetMasterSdPageCount(ePageKind);
if (nPageCount > 0)
nCurrentPage = Min((USHORT)(nPageCount - 1), nCurrentPage);
else
nCurrentPage = 0;
if (eEditMode == EM_PAGE)
{
// Update fuer TabControl
aTabControl.Clear();
SdPage* pPage = NULL;
String aPageName;
for (USHORT i = 0; i < nPageCount; i++)
{
pPage = GetDoc()->GetSdPage(i, ePageKind);
aPageName = pPage->GetName();
aTabControl.InsertPage(i + 1, aPageName);
// Selektionskennungen der Seiten korrigieren
GetDoc()->SetSelected(pPage, i == nCurrentPage);
}
aTabControl.SetCurPageId(nCurrentPage + 1);
}
else // EM_MASTERPAGE
{
SdPage* pActualPage = GetDoc()->GetMasterSdPage(nCurrentPage, ePageKind);
aTabControl.Clear();
USHORT nActualMasterPageNum = 0;
USHORT nMasterPageCnt = GetDoc()->GetMasterSdPageCount(ePageKind);
for (USHORT i = 0; i < nMasterPageCnt; i++)
{
SdPage* pMaster = GetDoc()->GetMasterSdPage(i, ePageKind);
String aLayoutName(pMaster->GetLayoutName());
aLayoutName.Erase(aLayoutName.SearchAscii(SD_LT_SEPARATOR));
aTabControl.InsertPage(i + 1, aLayoutName);
if (pActualPage == pMaster)
nActualMasterPageNum = i;
}
aTabControl.SetCurPageId(nActualMasterPageNum + 1);
SwitchPage(nActualMasterPageNum);
}
GetViewFrame()->GetDispatcher()->Execute(SID_SWITCHPAGE,
SFX_CALLMODE_ASYNCHRON | SFX_CALLMODE_RECORD);
}
/*************************************************************************
|*
|* Verb auf OLE-Objekt anwenden
|*
\************************************************************************/
ErrCode DrawViewShell::DoVerb(long nVerb)
{
if ( pDrView->AreObjectsMarked() )
{
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
if (rMarkList.GetMarkCount() == 1)
{
SdrMark* pMark = rMarkList.GetMark(0);
SdrObject* pObj = pMark->GetObj();
UINT32 nInv = pObj->GetObjInventor();
UINT16 nSdrObjKind = pObj->GetObjIdentifier();
if (nInv = SdrInventor && nSdrObjKind == OBJ_OLE2)
{
ActivateObject( (SdrOle2Obj*) pObj, nVerb);
}
#ifdef STARIMAGE_AVAILABLE
else if (nInv = SdrInventor && nSdrObjKind == OBJ_GRAF &&
((SdrGrafObj*) pObj)->GetGraphicType() == GRAPHIC_BITMAP &&
SFX_APP()->HasFeature(SFX_FEATURE_SIMAGE))
{
SdrGrafObj* pSdrGrafObj = (SdrGrafObj*) pObj;
short nOK = RET_YES;
if ( pSdrGrafObj->GetFileName().Len() )
{
// Graphik ist gelinkt, soll der Link aufgehoben werden?
QueryBox aBox(pWindow, WB_YES_NO | WB_DEF_YES,
String( SdResId(STR_REMOVE_LINK) ) );
nOK = aBox.Execute();
if (nOK == RET_YES)
{
// Link aufheben (File- und Filtername zuruecksetzen)
pSdrGrafObj->SetGraphicLink(String(), String());
}
}
if (nOK == RET_YES)
{
/**************************************************************
* OLE-Objekt erzeugen, StarImage starten
* Grafik-Objekt loeschen (durch OLE-Objekt ersetzt)
**************************************************************/
pDrView->HideMarkHdl(NULL);
SvStorageRef aStor = new SvStorage(String());
SvInPlaceObjectRef aNewIPObj = &((SvFactory*)SvInPlaceObject::ClassFactory())
->CreateAndInit(SimModuleDummy::GetID(SOFFICE_FILEFORMAT_CURRENT), aStor);
if ( aNewIPObj.Is() )
{
SdrGrafObj* pTempSdrGrafObj = (SdrGrafObj*) pSdrGrafObj->Clone ();
SvEmbeddedInfoObject * pInfo;
pInfo = GetViewFrame()->GetObjectShell()->
InsertObject( aNewIPObj, String() );
String aName;
if (pInfo)
{
aName = pInfo->GetObjName();
}
Rectangle aRect = pObj->GetLogicRect();
SdrOle2Obj* pSdrOle2Obj = new SdrOle2Obj( aNewIPObj,
aName, aRect );
SdrPageView* pPV = pDrView->GetPageViewPvNum(0);
pPV->GetObjList()->InsertObject( pSdrOle2Obj );
pDrView->ReplaceObject( pObj, *pPV, pTempSdrGrafObj );
pSdrOle2Obj->SetLogicRect(aRect);
aNewIPObj->SetVisAreaSize(aRect.GetSize());
SimDLL::Update(aNewIPObj, pTempSdrGrafObj->GetGraphic(), pWindow);
ActivateObject(pSdrOle2Obj, SVVERB_SHOW);
Client* pClient = (Client*) GetIPClient();
if (pClient)
pClient->SetSdrGrafObj( pTempSdrGrafObj );
}
}
}
#endif
}
}
return 0;
}
/*************************************************************************
|*
|* OLE-Object aktivieren
|*
\************************************************************************/
BOOL DrawViewShell::ActivateObject(SdrOle2Obj* pObj, long nVerb)
{
BOOL bActivated = FALSE;
if ( !GetDocSh()->IsUIActive() )
{
bActivated = ViewShell::ActivateObject(pObj, nVerb);
OSL_ASSERT(GetViewShell()!=NULL);
Client* pClient = static_cast<Client*>(GetViewShell()->GetIPClient());
if (pClient)
pClient->SetSdrGrafObj(NULL);
}
return(bActivated);
}
/*************************************************************************
|*
|* Auf gewuenschte Seite schalten
|* Der Parameter nSelectedPage bezieht sich auf den aktuellen EditMode
|*
\************************************************************************/
BOOL DrawViewShell::SwitchPage(USHORT nSelectedPage)
{
BOOL bOK = FALSE;
// With the current implementation of FuSlideShow there is a problem
// when it dsplays the show in a window: When the show is stopped it
// returns at one point in time SDRPAGE_NOTFOUND as current page index.
// Because FuSlideShow is currently being rewritten this bug is fixed
// here.
// This is not as bad a hack as it may lock since making SwitchPage()
// more robust with respect to invalid page numbers this if statement is
// a good thing anyway.
if (nSelectedPage == SDRPAGE_NOTFOUND)
nSelectedPage = 0;
if (IsSwitchPageAllowed())
{
bOK = TRUE;
BOOL bIsChanged = GetDoc()->IsChanged();
if (pActualPage)
{
// When in master page mode then the given index defines a
// master page and may be larger then the number of slides.
// Probably we should jump over this whole block.
SdPage* pNewPage = NULL;
if (GetDoc()->GetSdPageCount(ePageKind) > nSelectedPage)
pNewPage = GetDoc()->GetSdPage(nSelectedPage, ePageKind);
if (pActualPage == pNewPage)
{
if (eEditMode == EM_MASTERPAGE)
{
pNewPage = (SdPage*)(&(pNewPage->TRG_GetMasterPage()));
}
SdrPageView* pPV = pDrView->GetPageViewPvNum(0);
if (pPV && pNewPage == (SdPage*) pPV->GetPage() &&
pNewPage->GetName() == aTabControl.GetPageText(nSelectedPage+1))
{
// Die Seite wird schon angezeigt
return(TRUE);
}
}
}
if( pDrView )
pDrView->EndTextEdit();
pActualPage = NULL;
if (eEditMode == EM_PAGE)
{
pActualPage = GetDoc()->GetSdPage(nSelectedPage, ePageKind);
}
else
{
SdPage* pMaster = GetDoc()->GetMasterSdPage(nSelectedPage, ePageKind);
// Passt die selektierte Seite zur MasterPage?
USHORT nPageCount = GetDoc()->GetSdPageCount(ePageKind);
for (USHORT i = 0; i < nPageCount; i++)
{
SdPage* pPage = GetDoc()->GetSdPage(i, ePageKind);
if(pPage && pPage->IsSelected() && pMaster == &(pPage->TRG_GetMasterPage()))
{
pActualPage = pPage;
break;
}
}
if (!pActualPage)
{
// Die erste Seite nehmen, welche zur MasterPage passt
for (USHORT i = 0; i < nPageCount; i++)
{
SdPage* pPage = GetDoc()->GetSdPage(i, ePageKind);
if(pPage && pMaster == &(pPage->TRG_GetMasterPage()))
{
pActualPage = pPage;
break;
}
}
}
}
for (USHORT i = 0; i < GetDoc()->GetSdPageCount(ePageKind); i++)
{
// Alle Seiten deselektieren
GetDoc()->SetSelected( GetDoc()->GetSdPage(i, ePageKind), FALSE);
}
if (!pActualPage)
{
// Sofern es keine pActualPage gibt, wird die erste genommen
pActualPage = GetDoc()->GetSdPage(0, ePageKind);
}
// diese Seite auch selektieren (pActualPage zeigt immer auf Zeichenseite,
// nie auf eine Masterpage)
GetDoc()->SetSelected(pActualPage, TRUE);
if( !mpSlideShow || ( mpSlideShow->getAnimationMode() != ANIMATIONMODE_SHOW ) )
{
// VisArea zuziehen, um ggf. Objekte zu deaktivieren
// !!! only if we are not in presentation mode (#96279) !!!
OSL_ASSERT (GetViewShell()!=NULL);
GetViewShell()->DisconnectAllClients();
VisAreaChanged(Rectangle(Point(), Size(1, 1)));
}
if( pActualPage )
pActualPage->SetAutoLayout( pActualPage->GetAutoLayout() );
if (eEditMode == EM_PAGE)
{
/**********************************************************************
* PAGEMODE
**********************************************************************/
GetDoc()->SetSelected(pActualPage, TRUE);
SdrPageView* pPageView = pDrView->GetPageViewPvNum(0);
if (pPageView)
{
pFrameView->SetVisibleLayers( pPageView->GetVisibleLayers() );
pFrameView->SetPrintableLayers( pPageView->GetPrintableLayers() );
pFrameView->SetLockedLayers( pPageView->GetLockedLayers() );
if (ePageKind == PK_NOTES)
{
pFrameView->SetNotesHelpLines( pPageView->GetHelpLines() );
}
else if (ePageKind == PK_HANDOUT)
{
pFrameView->SetHandoutHelpLines( pPageView->GetHelpLines() );
}
else
{
pFrameView->SetStandardHelpLines( pPageView->GetHelpLines() );
}
}
pDrView->HideAllPages();
pDrView->ShowPage(pActualPage, Point(0, 0));
SdUnoDrawView* pController =
static_cast<SdUnoDrawView*>(GetController());
if (pController != NULL)
pController->FireSwitchCurrentPage (pActualPage);
SdrPageView* pNewPageView = pDrView->GetPageViewPvNum(0);
if (pNewPageView)
{
pNewPageView->SetVisibleLayers( pFrameView->GetVisibleLayers() );
pNewPageView->SetPrintableLayers( pFrameView->GetPrintableLayers() );
pNewPageView->SetLockedLayers( pFrameView->GetLockedLayers() );
if (ePageKind == PK_NOTES)
{
pNewPageView->SetHelpLines( pFrameView->GetNotesHelpLines() );
}
else if (ePageKind == PK_HANDOUT)
{
pNewPageView->SetHelpLines( pFrameView->GetHandoutHelpLines() );
}
else
{
pNewPageView->SetHelpLines( pFrameView->GetStandardHelpLines() );
}
}
aTabControl.SetCurPageId(nSelectedPage+1);
String aPageName = pActualPage->GetName();
if (aTabControl.GetPageText(nSelectedPage+1) != aPageName)
{
aTabControl.SetPageText(nSelectedPage+1, aPageName);
}
}
else
{
/**********************************************************************
* MASTERPAGE
**********************************************************************/
SdrPageView* pPageView = pDrView->GetPageViewPvNum(0);
if (pPageView)
{
pFrameView->SetVisibleLayers( pPageView->GetVisibleLayers() );
pFrameView->SetPrintableLayers( pPageView->GetPrintableLayers() );
pFrameView->SetLockedLayers( pPageView->GetLockedLayers() );
if (ePageKind == PK_NOTES)
{
pFrameView->SetNotesHelpLines( pPageView->GetHelpLines() );
}
else if (ePageKind == PK_HANDOUT)
{
pFrameView->SetHandoutHelpLines( pPageView->GetHelpLines() );
}
else
{
pFrameView->SetStandardHelpLines( pPageView->GetHelpLines() );
}
}
pDrView->HideAllPages();
SdPage* pMaster = GetDoc()->GetMasterSdPage(nSelectedPage, ePageKind);
if( !pMaster ) // Falls es diese Page nicht geben sollte
pMaster = GetDoc()->GetMasterSdPage(0, ePageKind);
USHORT nNum = pMaster->GetPageNum();
pDrView->ShowMasterPagePgNum(nNum, Point(0, 0));
SdUnoDrawView* pController =
static_cast<SdUnoDrawView*>(GetController());
if (pController != NULL)
pController->FireSwitchCurrentPage (pMaster);
SdrPageView* pNewPageView = pDrView->GetPageViewPvNum(0);
if (pNewPageView)
{
pNewPageView->SetVisibleLayers( pFrameView->GetVisibleLayers() );
pNewPageView->SetPrintableLayers( pFrameView->GetPrintableLayers() );
pNewPageView->SetLockedLayers( pFrameView->GetLockedLayers() );
if (ePageKind == PK_NOTES)
{
pNewPageView->SetHelpLines( pFrameView->GetNotesHelpLines() );
}
else if (ePageKind == PK_HANDOUT)
{
pNewPageView->SetHelpLines( pFrameView->GetHandoutHelpLines() );
}
else
{
pNewPageView->SetHelpLines( pFrameView->GetStandardHelpLines() );
}
}
String aLayoutName(pMaster->GetLayoutName());
aLayoutName.Erase(aLayoutName.SearchAscii(SD_LT_SEPARATOR));
aTabControl.SetCurPageId(nSelectedPage+1);
if (aTabControl.GetPageText(nSelectedPage+1) != aLayoutName)
{
aTabControl.SetPageText(nSelectedPage+1, aLayoutName);
}
if( ePageKind == PK_HANDOUT )
{
// set pages for all available handout presentation objects
sd::PresentationObjectList::iterator aIter( pMaster->GetPresObjList().begin() );
const sd::PresentationObjectList::iterator aEnd( pMaster->GetPresObjList().end() );
sal_uInt16 nPgNum = 0;
while( aIter != aEnd )
{
if( (*aIter).meKind == PRESOBJ_HANDOUT )
{
const sal_uInt16 nDestinationPageNum(2 * nPgNum + 1);
if(nDestinationPageNum < GetDoc()->GetPageCount())
{
static_cast<SdrPageObj*>((*aIter).mpObject)->SetReferencedPage(GetDoc()->GetPage(nDestinationPageNum));
}
else
{
static_cast<SdrPageObj*>((*aIter).mpObject)->SetReferencedPage(0L);
}
nPgNum++;
}
aIter++;
}
}
}
Size aVisSizePixel = GetActiveWindow()->GetOutputSizePixel();
Rectangle aVisAreaWin = GetActiveWindow()->PixelToLogic( Rectangle( Point(0,0), aVisSizePixel) );
VisAreaChanged(aVisAreaWin);
pDrView->VisAreaChanged(GetActiveWindow());
// Damit der Navigator (und das Effekte-Window) das mitbekommt (/-men)
SfxBindings& rBindings = GetViewFrame()->GetBindings();
rBindings.Invalidate(SID_NAVIGATOR_PAGENAME, TRUE, FALSE);
rBindings.Invalidate(SID_STATUS_PAGE, TRUE, FALSE);
UpdatePreview( pActualPage );
// if (pDrView->GetSlideShow())
// pDrView->SetAnimationMode(TRUE);
GetDoc()->SetChanged(bIsChanged);
}
return (bOK);
}
/*************************************************************************
|*
|* Pruefen, ob ein Seitenwechsel erlaubt ist
|*
\************************************************************************/
BOOL DrawViewShell::IsSwitchPageAllowed() const
{
bool bOK = true;
FmFormShell* pFormShell = static_cast<FmFormShell*>(
GetObjectBarManager().GetObjectBar(RID_FORMLAYER_TOOLBOX));
if (pFormShell!=NULL && !pFormShell->PrepareClose (FALSE))
bOK = false;
return bOK && !bInEffectAssignment;
}
/*************************************************************************
|*
|* neue aktuelle Seite auswaehlen, falls sich die Seitenfolge geaendert
|* hat (z. B. durch Undo)
|*
\************************************************************************/
void DrawViewShell::ResetActualLayer()
{
LayerTabBar* pLayerBar = GetLayerTabControl();
if (pLayerBar != NULL)
{
// remember old layer cound and current layer id
// this is needed when one layer is renamed to
// restore current layer
USHORT nOldLayerCnt = pLayerBar->GetPageCount();
USHORT nOldLayerId = pLayerBar->GetCurPageId();
/*************************************************************
* Update fuer LayerTab
*************************************************************/
pLayerBar->Clear();
String aName;
String aActiveLayer = pDrView->GetActiveLayer();
String aBackgroundLayer( SdResId(STR_LAYER_BCKGRND) );
String aBackgroundObjLayer( SdResId(STR_LAYER_BCKGRNDOBJ) );
String aLayoutLayer( SdResId(STR_LAYER_LAYOUT) );
String aControlsLayer( SdResId(STR_LAYER_CONTROLS) );
String aMeasureLinesLayer( SdResId(STR_LAYER_MEASURELINES) );
USHORT nNewLayer = 0;
USHORT nActiveLayer = SDRLAYER_NOTFOUND;
SdrLayerAdmin& rLayerAdmin = GetDoc()->GetLayerAdmin();
USHORT nLayerCnt = rLayerAdmin.GetLayerCount();
for ( USHORT nLayer = 0; nLayer < nLayerCnt; nLayer++ )
{
aName = rLayerAdmin.GetLayer(nLayer)->GetName();
if ( aName == aActiveLayer )
{
nActiveLayer = nLayer;
}
if ( aName != aBackgroundLayer )
{
if (eEditMode == EM_MASTERPAGE)
{
// Layer der Page nicht auf MasterPage anzeigen
if (aName != aLayoutLayer &&
aName != aControlsLayer &&
aName != aMeasureLinesLayer)
{
pLayerBar->InsertPage(nLayer+1, aName);
TabBarPageBits nBits = 0;
SdrPageView* pPV = pDrView->GetPageViewPvNum(0);
if (pPV && !pPV->IsLayerVisible(aName))
{
// Unsichtbare Layer werden anders dargestellt
nBits = TPB_SPECIAL;
}
pLayerBar->SetPageBits(nLayer+1, nBits);
}
}
else
{
// Layer der MasterPage nicht auf Page anzeigen
if ( aName != aBackgroundObjLayer )
{
pLayerBar->InsertPage(nLayer+1, aName);
TabBarPageBits nBits = 0;
if (!pDrView->GetPageViewPvNum(0)->IsLayerVisible(aName))
{
// Unsichtbare Layer werden anders dargestellt
nBits = TPB_SPECIAL;
}
pLayerBar->SetPageBits(nLayer+1, nBits);
}
}
}
}
if ( nActiveLayer == SDRLAYER_NOTFOUND )
{
if( nOldLayerCnt == pLayerBar->GetPageCount() )
{
nActiveLayer = nOldLayerId - 1;
}
else
{
nActiveLayer = ( eEditMode == EM_MASTERPAGE ) ? 2 : 0;
}
pDrView->SetActiveLayer( pLayerBar->GetPageText(nActiveLayer + 1) );
}
pLayerBar->SetCurPageId(nActiveLayer + 1);
GetViewFrame()->GetBindings().Invalidate( SID_MODIFYLAYER );
}
}
/*************************************************************************
|*
|* Verzoegertes Close ausfuehren
|*
\************************************************************************/
IMPL_LINK( DrawViewShell, CloseHdl, Timer*, pTimer )
{
pTimer->Stop();
GetViewFrame()->GetBindings().Execute( SID_CLOSEWIN );
return 0L;
}
/*************************************************************************
|*
|* Setzt die HelpId in Abhaengigkeit von der Selektion
|*
\************************************************************************/
void DrawViewShell::SetHelpIdBySelection()
{
UINT32 nHelpId = 0;
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
if( rMarkList.GetMarkCount() > 0 )
{
SdrObject* pObj = rMarkList.GetMark(0)->GetObj();
UINT32 nInventor = pObj->GetObjInventor();
UINT16 nObjId = pObj->GetObjIdentifier();
if( nInventor == SdrInventor)
{
switch ( nObjId )
{
case OBJ_LINE:
// Alle Linien
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_RECT:
// Gefuellt: Rechteck, Quadrat, Rechteck abgerundet, Quadrat abgerundet
// Ungefuellt: Rechteck, Quadrat, Rechteck abgerundet, Quadrat abgerundet
nHelpId = SID_DRAWTBX_RECTANGLES;
break;
case OBJ_CIRC:
// Gefuellt: Ellipse, Kreis
// Ungefuellt: Ellipse, Kreis
nHelpId = SID_DRAWTBX_ELLIPSES;
break;
case OBJ_SECT:
// Gefuellt: Ellipsensektor, Kreissektor
// Ungefuellt: Ellipsensektor, Kreissektor
nHelpId = SID_DRAWTBX_ELLIPSES;
break;
case OBJ_CARC:
// Ellipsenbogen, Kreisbogen
nHelpId = SID_DRAWTBX_ELLIPSES;
break;
case OBJ_CCUT:
// Gefuellt: Ellipsensegment, Kreissegment
// Ungefuellt: Ellipsensegment, Kreissegment
nHelpId = SID_DRAWTBX_ELLIPSES;
break;
case OBJ_POLY:
// Gefuellt: Polygon, Polygon 45
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_PLIN:
// Ungefuellt: Polygon, Polygon 45
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_PATHLINE:
// Ungefuellt: Kurve, Freihandlinie
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_PATHFILL:
// Gefuellt: Kurve, Freihandlinie
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_TEXT:
// Text, Text an Rahmen
nHelpId = SID_DRAWTBX_TEXT;
break;
case OBJ_TITLETEXT:
nHelpId = SID_DRAWTBX_TEXT;
break;
case OBJ_OUTLINETEXT:
nHelpId = SID_DRAWTBX_TEXT;
break;
case OBJ_GRAF:
// Graphik
nHelpId = 0;
break;
case OBJ_OLE2:
// OLE
nHelpId = 0;
break;
case OBJ_EDGE:
// Alle Verbinder
nHelpId = SID_DRAWTBX_CONNECTORS;
break;
case OBJ_CAPTION:
// Legende
nHelpId = SID_DRAWTBX_TEXT;
break;
case OBJ_PAGE:
// Seitendarstellungsobjekt
nHelpId = 0;
break;
case OBJ_MEASURE:
// Masslinie
nHelpId = SID_DRAWTBX_LINES;
break;
case OBJ_UNO:
// UNO
nHelpId = 0;
break;
}
}
else if( nInventor == E3dInventor)
{
// Alle 3D-Objekte
nHelpId = SID_DRAWTBX_3D_OBJECTS;
}
else if( nInventor == FmFormInventor)
{
// Alle FormControls
nHelpId = HID_FM_CTL_SELECTION;
}
}
}
/*************************************************************************
|*
|* AcceptDrop
|*
\************************************************************************/
sal_Int8 DrawViewShell::AcceptDrop (
const AcceptDropEvent& rEvt,
DropTargetHelper& rTargetHelper,
::sd::Window* pTargetWindow,
USHORT nPage,
USHORT nLayer )
{
if( nPage != SDRPAGE_NOTFOUND )
nPage = GetDoc()->GetSdPage( nPage, ePageKind )->GetPageNum();
if( mpSlideShow )
return DND_ACTION_NONE;
return pDrView->AcceptDrop( rEvt, rTargetHelper, pTargetWindow, nPage, nLayer );
}
/*************************************************************************
|*
|* ExecuteDrop
|*
\************************************************************************/
sal_Int8 DrawViewShell::ExecuteDrop (
const ExecuteDropEvent& rEvt,
DropTargetHelper& rTargetHelper,
::sd::Window* pTargetWindow,
USHORT nPage,
USHORT nLayer)
{
if( nPage != SDRPAGE_NOTFOUND )
nPage = GetDoc()->GetSdPage( nPage, ePageKind )->GetPageNum();
if( mpSlideShow )
return DND_ACTION_NONE;
Broadcast(ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_START));
sal_Int8 nResult (pDrView->ExecuteDrop( rEvt, rTargetHelper, pTargetWindow, nPage, nLayer ));
Broadcast(ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_END));
return nResult;
}
} // end of namespace sd
#ifdef WNT
#pragma optimize ( "", on )
#endif