/*************************************************************************
*
* $RCSfile: drviews8.cxx,v $
*
* $Revision: 1.12 $
*
* last change: $Author: vg $ $Date: 2005-03-23 14:04:53 $
*
* The Contents of this file are made available subject to the terms of
* either of the following licenses
*
* - GNU Lesser General Public License Version 2.1
* - Sun Industry Standards Source License Version 1.1
*
* Sun Microsystems Inc., October, 2000
*
* GNU Lesser General Public License Version 2.1
* =============================================
* Copyright 2000 by Sun Microsystems, Inc.
* 901 San Antonio Road, Palo Alto, CA 94303, USA
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2.1, as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*
* Sun Industry Standards Source License Version 1.1
* =================================================
* The contents of this file are subject to the Sun Industry Standards
* Source License Version 1.1 (the "License"); You may not use this file
* except in compliance with the License. You may obtain a copy of the
* License at http://www.openoffice.org/license.html.
*
* Software provided under this License is provided on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
* MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
* See the License for the specific provisions governing your rights and
* obligations concerning the Software.
*
* The Initial Developer of the Original Code is: Sun Microsystems, Inc.
*
* Copyright: 2000 by Sun Microsystems, Inc.
*
* All Rights Reserved.
*
* Contributor(s): _______________________________________
*
*
************************************************************************/
#include "DrawViewShell.hxx"
#include "ViewShellHint.hxx"
#ifndef _TOOLKIT_HELPER_VCLUNOHELPER_HXX_
#include <toolkit/unohlp.hxx>
#endif
#ifndef _SFXDISPATCH_HXX
#include <sfx2/dispatch.hxx>
#endif
#ifndef _SVXIDS_HXX
#include <svx/svxids.hrc>
#endif
#ifndef _SV_MSGBOX_HXX //autogen
#include <vcl/msgbox.hxx>
#endif
#ifndef _SVDDEF_HXX //autogen
#include <svx/svddef.hxx>
#endif
#ifndef _SFX_BINDINGS_HXX //autogen
#include <sfx2/bindings.hxx>
#endif
#ifndef _SFXREQUEST_HXX //autogen
#include <sfx2/request.hxx>
#endif
#ifndef _SFXVIEWFRM_HXX
#include <sfx2/viewfrm.hxx>
#endif
#ifndef _SVDOGRAF_HXX //autogen
#include <svx/svdograf.hxx>
#endif
#ifndef _SVDPAGV_HXX //autogen
#include <svx/svdpagv.hxx>
#endif
#include "app.hrc"
#include "strings.hrc"
#include "misc.hxx"
#include "fuzoom.hxx"
#ifndef SD_FU_DISPLAY_ORDER_HXX
#include "fudspord.hxx"
#endif
#ifndef SD_FU_TRANSFORM_HXX
#include "futransf.hxx"
#endif
#ifndef SD_FU_LINE_HXX
#include "fuline.hxx"
#endif
#ifndef SD_FU_AREA_HXX
#include "fuarea.hxx"
#endif
#ifndef SD_FU_CHAR_HXX
#include "fuchar.hxx"
#endif
#ifndef SD_FU_PARAGRAPH_HXX
#include "fuparagr.hxx"
#endif
#ifndef SD_FU_BULLET_HXX
#include "fubullet.hxx"
#endif
#ifndef SD_FU_TEMPLATE_HXX
#include "futempl.hxx"
#endif
#ifndef SD_FU_INSERT_HXX
#include "fuinsert.hxx"
#endif
#ifndef SD_FU_PRESENTATION_LAYOUT_HXX
#include "fuprlout.hxx"
#endif
#ifndef SD_FU_PRESENTATION_TEMPLATES_HXX
#include "fuprtmpl.hxx"
#endif
#ifndef SD_FU_PAGE_HXX
#include "fupage.hxx"
#endif
#ifndef SD_FU_OBJECT_ANIMATION_PARAMETERS_HXX
#include "fuoaprms.hxx"
#endif
#ifndef SD_FU_COPY_HXX
#include "fucopy.hxx"
#endif
#ifndef SD_FU_LINE_END_HXX
#include "fulinend.hxx"
#endif
#ifndef SD_FU_SNAP_LINE_HXX
#include "fusnapln.hxx"
#endif
#ifndef SD_FU_OUTLINE_BULLET_HXX
#include "fuolbull.hxx"
#endif
#ifndef SD_FU_INSERT_FILE_HXX
#include "fuinsfil.hxx"
#endif
#ifndef SD_FU_LINK_HXX
#include "fulink.hxx"
#endif
#ifndef SD_FU_THESAURUS_HXX
#include "futhes.hxx"
#endif
#ifndef SD_FU_TEXT_ATTR_DLG_HXX
#include "futxtatt.hxx"
#endif
#ifndef SD_FU_MEASURE_DLG_HXX
#include "fumeasur.hxx"
#endif
#ifndef SD_FU_CONNECTION_DLG_HXX
#include "fuconnct.hxx"
#endif
#ifndef SD_FU_MORPH_HXX
#include "fumorph.hxx"
#endif
#ifndef SD_FU_VECTORIZE_HXX
#include "fuvect.hxx"
#endif
#include "sdresid.hxx"
#ifndef SD_WINDOW_HXX
#include "Window.hxx"
#endif
#ifndef SD_DRAW_VIEW_HXX
#include "drawview.hxx"
#endif
#include "zoomlist.hxx"
namespace sd {
/*************************************************************************
|*
|* SfxRequests fuer temporaere Funktionen
|*
\************************************************************************/
void DrawViewShell::FuTemp01(SfxRequest& rReq)
{
switch(rReq.GetSlot())
{
case SID_ATTRIBUTES_LINE: // BASIC
{
pFuActual = new FuLine( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_ATTRIBUTES_AREA: // BASIC
{
pFuActual = new FuArea( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_ATTR_TRANSFORM:
{
pFuActual = new FuTransform( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Invalidate(SID_RULER_OBJECT);
Cancel();
}
break;
case SID_CHAR_DLG: // BASIC
{
pFuActual = new FuChar( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_PARA_DLG:
{
pFuActual = new FuParagraph( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_OUTLINE_BULLET:
{
pFuActual = new FuOutlineBullet( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_BULLET:
{
pFuActual = new FuBullet( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_PRESENTATION_LAYOUT:
{
pFuActual = new FuPresentationLayout(this, GetActiveWindow(), pDrView, GetDoc(), rReq);
Cancel();
}
break;
// case SID_MODEL:
// {
// pFuActual = new FuTemplate( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
// Cancel();
// }
// break;
case SID_PASTE2:
{
pFuActual = new FuInsertClipboard( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
}
break;
case SID_INSERT_GRAPHIC:
{
pFuActual = new FuInsertGraphic( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
Invalidate(SID_DRAWTBX_INSERT);
}
break;
case SID_INSERT_AVMEDIA:
{
pFuActual = new FuInsertAVMedia( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
Invalidate(SID_DRAWTBX_INSERT);
}
break;
case SID_INSERT_OBJECT:
case SID_INSERT_PLUGIN:
case SID_INSERT_SOUND:
case SID_INSERT_VIDEO:
case SID_INSERT_APPLET:
case SID_INSERT_FLOATINGFRAME:
#ifdef STARIMAGE_AVAILABLE
case SID_INSERT_IMAGE:
#endif
case SID_INSERT_MATH:
case SID_INSERT_DIAGRAM:
case SID_ATTR_TABLE:
{
pFuActual = new FuInsertOLE( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
Invalidate(SID_DRAWTBX_INSERT);
}
break;
case SID_COPYOBJECTS:
{
if ( pDrView->IsPresObjSelected(FALSE, TRUE) )
{
::sd::Window* pWindow = GetActiveWindow();
InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
}
else
{
if ( pDrView->IsTextEdit() )
{
pDrView->EndTextEdit();
}
pFuActual = new FuCopy( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
}
Cancel();
rReq.Ignore ();
}
break;
case SID_INSERTFILE: // BASIC
{
Broadcast (ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_START));
pFuActual = new FuInsertFile( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Broadcast (ViewShellHint(ViewShellHint::HINT_COMPLEX_MODEL_CHANGE_END));
Cancel();
rReq.Done ();
Invalidate(SID_DRAWTBX_INSERT);
}
break;
case SID_PAGESETUP: // BASIC ??
{
pFuActual = new FuPage( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore (); // es werden eigenstaendige macros generiert !!
}
break;
case SID_ZOOM_OUT:
case SID_ZOOM_PANNING:
{
bZoomOnPage = FALSE;
pFuActual = new FuZoom(this, GetActiveWindow(), pDrView, GetDoc(), rReq);
// Beendet sich selbst, kein Cancel() notwendig!
Invalidate( SID_ZOOM_TOOLBOX );
rReq.Ignore ();
}
break;
case SID_BEFORE_OBJ:
case SID_BEHIND_OBJ:
{
pFuActual = new FuDisplayOrder(this, GetActiveWindow(), pDrView, GetDoc(), rReq);
Invalidate( SID_POSITION );
rReq.Ignore ();
// Beendet sich selbst, kein Cancel() notwendig!
}
break;
case SID_REVERSE_ORDER: // BASIC
{
pDrView->ReverseOrderOfMarked();
Invalidate( SID_POSITION );
Cancel();
rReq.Done ();
}
break;
case SID_ANIMATION_EFFECTS:
{
pFuActual =new FuObjectAnimationParameters( this, GetActiveWindow(), pDrView, GetDoc(), rReq);
Cancel();
}
break;
case SID_LINEEND_POLYGON:
{
pFuActual = new FuLineEnd( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_CAPTUREPOINT:
// negative Werte um Aufruf aus Menue zu signalisieren
aMousePos = Point(-1,-1);
case SID_SET_SNAPITEM:
{
pFuActual = new FuSnapLine(this, GetActiveWindow(), pDrView, GetDoc(), rReq);
Cancel();
}
break;
case SID_MANAGE_LINKS:
{
pFuActual = new FuLink( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
}
break;
case SID_THESAURUS:
{
pFuActual = new FuThesaurus( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
}
break;
case SID_TEXTATTR_DLG:
{
pFuActual = new FuTextAttrDlg( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
}
break;
case SID_MEASURE_DLG:
{
pFuActual = new FuMeasureDlg( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Ignore ();
}
break;
case SID_CONNECTION_DLG:
{
pFuActual = new FuConnectionDlg( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
rReq.Done();
}
break;
case SID_CONNECTION_NEW_ROUTING:
{
SfxItemSet aDefAttr( GetPool(), SDRATTR_EDGELINE1DELTA, SDRATTR_EDGELINE3DELTA );
GetView()->SetAttributes( aDefAttr, TRUE ); // (ReplaceAll)
Cancel();
rReq.Done();
}
break;
case SID_TWAIN_SELECT:
{
BOOL bDone = FALSE;
if( mxScannerManager.is() )
{
try
{
const ::com::sun::star::uno::Sequence< ::com::sun::star::scanner::ScannerContext >
aContexts( mxScannerManager->getAvailableScanners() );
if( aContexts.getLength() )
{
::com::sun::star::scanner::ScannerContext aContext( aContexts.getConstArray()[ 0 ] );
bDone = mxScannerManager->configureScanner( aContext );
}
}
catch(...)
{
}
}
Cancel();
rReq.Done();
}
break;
case SID_TWAIN_TRANSFER:
{
BOOL bDone = FALSE;
if( mxScannerManager.is() )
{
try
{
const ::com::sun::star::uno::Sequence< ::com::sun::star::scanner::ScannerContext > aContexts( mxScannerManager->getAvailableScanners() );
if( aContexts.getLength() )
{
mxScannerManager->startScan( aContexts.getConstArray()[ 0 ], mxScannerListener );
bDone = TRUE;
}
}
catch( ... )
{
}
}
if( !bDone )
{
#ifndef UNX
const USHORT nId = STR_TWAIN_NO_SOURCE;
#else
const USHORT nId = STR_TWAIN_NO_SOURCE_UNX;
#endif
::sd::Window* pWindow = GetActiveWindow();
InfoBox(pWindow, String( SdResId( nId ) ) ).Execute();
}
else
{
SfxBindings& rBindings = GetViewFrame()->GetBindings();
rBindings.Invalidate( SID_TWAIN_SELECT );
rBindings.Invalidate( SID_TWAIN_TRANSFER );
}
Cancel();
rReq.Done();
}
break;
case SID_POLYGON_MORPHING:
{
pFuActual = new FuMorph( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
case SID_VECTORIZE:
{
pFuActual = new FuVectorize( this, GetActiveWindow(), pDrView, GetDoc(), rReq );
Cancel();
}
break;
default:
{
// switch Anweisung wegen CLOOKS aufgeteilt. Alle case-Anweisungen die
// eine Fu???? -Funktion aufrufen, sind in die Methode FuTemp01 (drviews8),
// FuTemp02 (drviewsb) gewandert.
FuTemp02(rReq);
}
break;
}
}
/*************************************************************************
|*
|* Scanner-Event
|*
\************************************************************************/
void DrawViewShell::ScannerEvent( const ::com::sun::star::lang::EventObject& rEventObject )
{
if( mxScannerManager.is() )
{
const ::com::sun::star::scanner::ScannerContext aContext( mxScannerManager->getAvailableScanners().getConstArray()[ 0 ] );
const ::com::sun::star::scanner::ScanError eError = mxScannerManager->getError( aContext );
if( ::com::sun::star::scanner::ScanError_ScanErrorNone == eError )
{
const ::com::sun::star::uno::Reference< ::com::sun::star::awt::XBitmap > xBitmap( mxScannerManager->getBitmap( aContext ) );
if( xBitmap.is() )
{
const BitmapEx aScanBmp( VCLUnoHelper::GetBitmap( xBitmap ) );
if( !!aScanBmp )
{
const ::vos::OGuard aGuard( Application::GetSolarMutex() );
SdrPage* pPage = pDrView->GetPageViewPvNum( 0 )->GetPage();
Size aBmpSize( aScanBmp.GetPrefSize() ), aPageSize( pPage->GetSize() );
const MapMode aMap100( MAP_100TH_MM );
if( !aBmpSize.Width() || !aBmpSize.Height() )
aBmpSize = aScanBmp.GetSizePixel();
if( aScanBmp.GetPrefMapMode().GetMapUnit() == MAP_PIXEL )
aBmpSize = GetActiveWindow()->PixelToLogic( aBmpSize, aMap100 );
else
aBmpSize = OutputDevice::LogicToLogic( aBmpSize, aScanBmp.GetPrefMapMode(), aMap100 );
aPageSize.Width() -= pPage->GetLftBorder() + pPage->GetRgtBorder();
aPageSize.Height() -= pPage->GetUppBorder() + pPage->GetLwrBorder();
if( ( aBmpSize.Height() > aPageSize.Height() ) || ( aBmpSize.Width() > aPageSize.Width() ) && aBmpSize.Height() && aPageSize.Height() )
{
double fGrfWH = (double) aBmpSize.Width() / aBmpSize.Height();
double fWinWH = (double) aPageSize.Width() / aPageSize.Height();
if( fGrfWH < fWinWH )
{
aBmpSize.Width() = FRound( aPageSize.Height() * fGrfWH );
aBmpSize.Height()= aPageSize.Height();
}
else if( fGrfWH > 0.F )
{
aBmpSize.Width() = aPageSize.Width();
aBmpSize.Height()= FRound( aPageSize.Width() / fGrfWH );
}
}
Point aPnt ( ( aPageSize.Width() - aBmpSize.Width() ) >> 1, ( aPageSize.Height() - aBmpSize.Height() ) >> 1 );
aPnt += Point( pPage->GetLftBorder(), pPage->GetUppBorder() );
Rectangle aRect( aPnt, aBmpSize );
SdrGrafObj* pGrafObj = NULL;
BOOL bInsertNewObject = TRUE;
if( GetView()->AreObjectsMarked() )
{
const SdrMarkList& rMarkList = pDrView->GetMarkedObjectList();
if( rMarkList.GetMarkCount() == 1 )
{
SdrMark* pMark = rMarkList.GetMark(0);
SdrObject* pObj = pMark->GetObj();
if( pObj->ISA( SdrGrafObj ) )
{
pGrafObj = static_cast< SdrGrafObj* >( pObj );
if( pGrafObj->IsEmptyPresObj() )
{
bInsertNewObject = FALSE;
pGrafObj->SetEmptyPresObj(FALSE);
pGrafObj->SetOutlinerParaObject(NULL);
pGrafObj->SetGraphic( Graphic( aScanBmp ) );
}
}
}
}
if( bInsertNewObject )
{
pGrafObj = new SdrGrafObj( Graphic( aScanBmp ), aRect );
SdrPageView* pPV = GetView()->GetPageViewPvNum(0);
GetView()->InsertObject( pGrafObj, *pPV, SDRINSERT_SETDEFLAYER );
}
}
}
}
}
SfxBindings& rBindings = GetViewFrame()->GetBindings();
rBindings.Invalidate( SID_TWAIN_SELECT );
rBindings.Invalidate( SID_TWAIN_TRANSFER );
}
} // end of namespace sd