/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "Window.hxx" #include #include #include #include #include #include #include #include "app.hrc" #include "helpids.h" #include "ViewShell.hxx" #include "DrawViewShell.hxx" #include "View.hxx" #include "FrameView.hxx" #include "OutlineViewShell.hxx" #include "drawdoc.hxx" #include "AccessibleDrawDocumentView.hxx" #include "WindowUpdater.hxx" #include "ViewShellBase.hxx" #include "uiobject.hxx" #include #include #include #include #include namespace sd { #define SCROLL_LINE_FACT 0.05 ///< factor for line scrolling #define SCROLL_PAGE_FACT 0.5 ///< factor for page scrolling #define SCROLL_SENSITIVE 20 ///< sensitive area in pixel #define ZOOM_MULTIPLICATOR 10000 ///< multiplier to avoid rounding errors #define MIN_ZOOM 5 ///< minimal zoom factor #define MAX_ZOOM 3000 ///< maximal zoom factor Window::Window(vcl::Window* pParent) : vcl::Window(pParent, WinBits(WB_CLIPCHILDREN | WB_DIALOGCONTROL)), DropTargetHelper( this ), mpShareWin(nullptr), maWinPos(0, 0), // precautionary; but the values should be set maViewOrigin(0, 0), // again from the owner of the window maViewSize(1000, 1000), maPrevSize(-1,-1), mnMinZoom(MIN_ZOOM), mnMaxZoom(MAX_ZOOM), mbMinZoomAutoCalc(false), mbCenterAllowed(true), mnTicks (0), mpViewShell(nullptr), mbUseDropScroll (true) { SetDialogControlFlags( DialogControlFlags::Return | DialogControlFlags::WantFocus ); MapMode aMap(GetMapMode()); aMap.SetMapUnit(MapUnit::Map100thMM); SetMapMode(aMap); // whit it, the vcl::WindowColor is used in the slide mode SetBackground( Wallpaper( GetSettings().GetStyleSettings().GetWindowColor() ) ); // adjust contrast mode initially bool bUseContrast = GetSettings().GetStyleSettings().GetHighContrastMode(); SetDrawMode( bUseContrast ? sd::OUTPUT_DRAWMODE_CONTRAST : sd::OUTPUT_DRAWMODE_COLOR ); // #i78183# Added after discussed with AF EnableRTL(false); } Window::~Window() { disposeOnce(); } void Window::dispose() { if (mpViewShell != nullptr) { WindowUpdater* pWindowUpdater = mpViewShell->GetWindowUpdater(); if (pWindowUpdater != nullptr) pWindowUpdater->UnregisterWindow (this); } mpShareWin.clear(); DropTargetHelper::dispose(); vcl::Window::dispose(); } void Window::SetViewShell (ViewShell* pViewSh) { WindowUpdater* pWindowUpdater = nullptr; // Unregister at device updater of old view shell. if (mpViewShell != nullptr) { pWindowUpdater = mpViewShell->GetWindowUpdater(); if (pWindowUpdater != nullptr) pWindowUpdater->UnregisterWindow (this); } mpViewShell = pViewSh; // Register at device updater of new view shell if (mpViewShell != nullptr) { pWindowUpdater = mpViewShell->GetWindowUpdater(); if (pWindowUpdater != nullptr) pWindowUpdater->RegisterWindow (this); } } ViewShell* Window::GetViewShell() { return mpViewShell; } void Window::CalcMinZoom() { // Are we entitled to change the minimal zoom factor? if ( mbMinZoomAutoCalc ) { // Get current zoom factor. long nZoom = GetZoom(); if ( mpShareWin ) { mpShareWin->CalcMinZoom(); mnMinZoom = mpShareWin->mnMinZoom; } else { // Get the rectangle of the output area in logical coordinates // and calculate the scaling factors that would lead to the view // area (also called application area) to completely fill the // window. Size aWinSize = PixelToLogic(GetOutputSizePixel()); sal_uLong nX = (sal_uLong) ((double) aWinSize.Width() * (double) ZOOM_MULTIPLICATOR / (double) maViewSize.Width()); sal_uLong nY = (sal_uLong) ((double) aWinSize.Height() * (double) ZOOM_MULTIPLICATOR / (double) maViewSize.Height()); // Decide whether to take the larger or the smaller factor. sal_uLong nFact = std::min(nX, nY); // The factor is transformed according to the current zoom factor. nFact = nFact * nZoom / ZOOM_MULTIPLICATOR; mnMinZoom = std::max((sal_uInt16) MIN_ZOOM, (sal_uInt16) nFact); } // If the current zoom factor is smaller than the calculated minimal // zoom factor then set the new minimal factor as the current zoom // factor. if ( nZoom < (long) mnMinZoom ) SetZoomFactor(mnMinZoom); } } void Window::SetMinZoom (long int nMin) { mnMinZoom = (sal_uInt16) nMin; } void Window::SetMaxZoom (long int nMax) { mnMaxZoom = (sal_uInt16) nMax; } long Window::GetZoom() const { if( GetMapMode().GetScaleX().GetDenominator() ) { return GetMapMode().GetScaleX().GetNumerator() * 100L / GetMapMode().GetScaleX().GetDenominator(); } else { return 0; } } void Window::Resize() { vcl::Window::Resize(); CalcMinZoom(); if( mpViewShell && mpViewShell->GetViewFrame() ) mpViewShell->GetViewFrame()->GetBindings().Invalidate( SID_ATTR_ZOOMSLIDER ); } void Window::PrePaint(vcl::RenderContext& /*rRenderContext*/) { if ( mpViewShell ) mpViewShell->PrePaint(); } void Window::Paint(vcl::RenderContext& /*rRenderContext*/, const ::tools::Rectangle& rRect) { if ( mpViewShell ) mpViewShell->Paint(rRect, this); } void Window::KeyInput(const KeyEvent& rKEvt) { if (getenv("SD_DEBUG") && rKEvt.GetKeyCode().GetCode() == KEY_F12 && mpViewShell) { mpViewShell->GetDoc()->dumpAsXml(nullptr); OutlinerView *pOLV = mpViewShell->GetView()->GetTextEditOutlinerView(); if (pOLV) pOLV->GetEditView().GetEditEngine()->dumpAsXmlEditDoc(nullptr); return; } if (!(mpViewShell && mpViewShell->KeyInput(rKEvt, this))) { if (mpViewShell && rKEvt.GetKeyCode().GetCode() == KEY_ESCAPE) { mpViewShell->GetViewShell()->Escape(); } else { vcl::Window::KeyInput(rKEvt); } } } void Window::MouseButtonDown(const MouseEvent& rMEvt) { if ( mpViewShell ) mpViewShell->MouseButtonDown(rMEvt, this); } void Window::MouseMove(const MouseEvent& rMEvt) { if ( mpViewShell ) mpViewShell->MouseMove(rMEvt, this); } void Window::MouseButtonUp(const MouseEvent& rMEvt) { mnTicks = 0; if ( mpViewShell ) mpViewShell->MouseButtonUp(rMEvt, this); } void Window::Command(const CommandEvent& rCEvt) { if (mpViewShell) mpViewShell->Command(rCEvt, this); //pass at least alt press/release to parent impl if (rCEvt.GetCommand() == CommandEventId::ModKeyChange) vcl::Window::Command(rCEvt); } bool Window::EventNotify( NotifyEvent& rNEvt ) { bool bResult = false; if ( mpViewShell ) { bResult = mpViewShell->Notify(rNEvt, this); } if( !bResult ) bResult = vcl::Window::EventNotify(rNEvt); return bResult; } void Window::RequestHelp(const HelpEvent& rEvt) { if ( mpViewShell ) { if( !mpViewShell->RequestHelp( rEvt ) ) vcl::Window::RequestHelp( rEvt ); } else vcl::Window::RequestHelp( rEvt ); } /** * Set the position of the upper left corner from the visible area of the * window. */ void Window::SetWinViewPos(const Point& rPnt) { maWinPos = rPnt; } /** * Set origin of the representation in respect to the whole working area. */ void Window::SetViewOrigin(const Point& rPnt) { maViewOrigin = rPnt; } /** * Set size of the whole working area which can be seen with the window. */ void Window::SetViewSize(const Size& rSize) { maViewSize = rSize; CalcMinZoom(); } void Window::SetCenterAllowed (bool bIsAllowed) { mbCenterAllowed = bIsAllowed; } long Window::SetZoomFactor(long nZoom) { // Clip the zoom factor to the valid range marked by nMinZoom as // calculated by CalcMinZoom() and the constant MAX_ZOOM. if ( nZoom > MAX_ZOOM ) nZoom = MAX_ZOOM; if ( nZoom < (long) mnMinZoom ) nZoom = mnMinZoom; // Set the zoom factor at the window's map mode. if (!comphelper::LibreOfficeKit::isActive()) { MapMode aMap(GetMapMode()); aMap.SetScaleX(Fraction(nZoom, 100)); aMap.SetScaleY(Fraction(nZoom, 100)); SetMapMode(aMap); } // invalidate previous size - it was relative to the old scaling maPrevSize = Size(-1,-1); // Update the map mode's origin (to what effect?). UpdateMapOrigin(); // Update the view's snapping to the new zoom factor. if ( mpViewShell && dynamic_cast< DrawViewShell *>( mpViewShell ) != nullptr ) static_cast(mpViewShell)->GetView()-> RecalcLogicSnapMagnetic(*this); // Return the zoom factor just in case it has been changed above to lie // inside the valid range. return nZoom; } void Window::SetZoomIntegral(long nZoom) { // Clip the zoom factor to the valid range marked by nMinZoom as // previously calculated by CalcMinZoom() and the // MAX_ZOOM constant. if ( nZoom > MAX_ZOOM ) nZoom = MAX_ZOOM; if ( nZoom < (long) mnMinZoom ) nZoom = mnMinZoom; // Calculate the window's new origin. Size aSize = PixelToLogic(GetOutputSizePixel()); long nW = aSize.Width() * GetZoom() / nZoom; long nH = aSize.Height() * GetZoom() / nZoom; maWinPos.X() += (aSize.Width() - nW) / 2; maWinPos.Y() += (aSize.Height() - nH) / 2; if ( maWinPos.X() < 0 ) maWinPos.X() = 0; if ( maWinPos.Y() < 0 ) maWinPos.Y() = 0; // Finally update this window's map mode to the given zoom factor that // has been clipped to the valid range. SetZoomFactor(nZoom); } long Window::GetZoomForRect( const ::tools::Rectangle& rZoomRect ) { long nRetZoom = 100; if( (rZoomRect.GetWidth() != 0) && (rZoomRect.GetHeight() != 0)) { // Calculate the scale factors which will lead to the given // rectangle being fully visible (when translated accordingly) as // large as possible in the output area independently in both // coordinate directions . sal_uLong nX(0L); sal_uLong nY(0L); const Size aWinSize( PixelToLogic(GetOutputSizePixel()) ); if(rZoomRect.GetHeight()) { nX = (sal_uLong) ((double) aWinSize.Height() * (double) ZOOM_MULTIPLICATOR / (double) rZoomRect.GetHeight()); } if(rZoomRect.GetWidth()) { nY = (sal_uLong) ((double) aWinSize.Width() * (double) ZOOM_MULTIPLICATOR / (double) rZoomRect.GetWidth()); } // Use the smaller one of both so that the zoom rectangle will be // fully visible with respect to both coordinate directions. sal_uLong nFact = std::min(nX, nY); // Transform the current zoom factor so that it leads to the desired // scaling. nRetZoom = nFact * GetZoom() / ZOOM_MULTIPLICATOR; // Calculate the new origin. if ( nFact == 0 ) { // Don't change anything if the scale factor is degenrate. nRetZoom = GetZoom(); } else { // Clip the zoom factor to the valid range marked by nMinZoom as // previously calculated by CalcMinZoom() and the // MAX_ZOOM constant. if ( nRetZoom > MAX_ZOOM ) nRetZoom = MAX_ZOOM; if ( nRetZoom < (long) mnMinZoom ) nRetZoom = mnMinZoom; } } return nRetZoom; } /** Recalculate the zoom factor and translation so that the given rectangle is displayed centered and as large as possible while still being fully visible in the window. */ long Window::SetZoomRect (const ::tools::Rectangle& rZoomRect) { long nNewZoom = 100; if (rZoomRect.GetWidth() == 0 || rZoomRect.GetHeight() == 0) { // The given rectangle is degenerate. Use the default zoom factor // (above) of 100%. SetZoomIntegral(nNewZoom); } else { Point aPos = rZoomRect.TopLeft(); // Transform the output area from pixel coordinates into logical // coordinates. Size aWinSize = PixelToLogic(GetOutputSizePixel()); // Paranoia! The degenerate case of zero width or height has been // taken care of above. DBG_ASSERT(rZoomRect.GetWidth(), "ZoomRect-Width = 0!"); DBG_ASSERT(rZoomRect.GetHeight(), "ZoomRect-Height = 0!"); // Calculate the scale factors which will lead to the given // rectangle being fully visible (when translated accordingly) as // large as possible in the output area independently in both // coordinate directions . sal_uLong nX(0L); sal_uLong nY(0L); if(rZoomRect.GetHeight()) { nX = (sal_uLong) ((double) aWinSize.Height() * (double) ZOOM_MULTIPLICATOR / (double) rZoomRect.GetHeight()); } if(rZoomRect.GetWidth()) { nY = (sal_uLong) ((double) aWinSize.Width() * (double) ZOOM_MULTIPLICATOR / (double) rZoomRect.GetWidth()); } // Use the smaller one of both so that the zoom rectangle will be // fully visible with respect to both coordinate directions. sal_uLong nFact = std::min(nX, nY); // Transform the current zoom factor so that it leads to the desired // scaling. long nZoom = nFact * GetZoom() / ZOOM_MULTIPLICATOR; // Calculate the new origin. if ( nFact == 0 ) { // Don't change anything if the scale factor is degenrate. nNewZoom = GetZoom(); } else { // Calculate the new window position that centers the given // rectangle on the screen. if ( nZoom > MAX_ZOOM ) nFact = nFact * MAX_ZOOM / nZoom; maWinPos = maViewOrigin + aPos; aWinSize.Width() = (long) ((double) aWinSize.Width() * (double) ZOOM_MULTIPLICATOR / (double) nFact); maWinPos.X() += (rZoomRect.GetWidth() - aWinSize.Width()) / 2; aWinSize.Height() = (long) ((double) aWinSize.Height() * (double) ZOOM_MULTIPLICATOR / (double) nFact); maWinPos.Y() += (rZoomRect.GetHeight() - aWinSize.Height()) / 2; if ( maWinPos.X() < 0 ) maWinPos.X() = 0; if ( maWinPos.Y() < 0 ) maWinPos.Y() = 0; // Adapt the window's map mode to the new zoom factor. nNewZoom = SetZoomFactor(nZoom); } } return nNewZoom; } void Window::SetMinZoomAutoCalc (bool bAuto) { mbMinZoomAutoCalc = bAuto; } /** * Calculate and set new MapMode origin. * If aWinPos.X()/Y() == -1, then we center the corresponding position (e.g. for * initialization). */ void Window::UpdateMapOrigin(bool bInvalidate) { bool bChanged = false; const Size aWinSize = PixelToLogic(GetOutputSizePixel()); if ( mbCenterAllowed ) { if( maPrevSize != Size(-1,-1) ) { // keep view centered around current pos, when window // resizes maWinPos.X() -= (aWinSize.Width() - maPrevSize.Width()) / 2; maWinPos.Y() -= (aWinSize.Height() - maPrevSize.Height()) / 2; bChanged = true; } if ( maWinPos.X() > maViewSize.Width() - aWinSize.Width() ) { maWinPos.X() = maViewSize.Width() - aWinSize.Width(); bChanged = true; } if ( maWinPos.Y() > maViewSize.Height() - aWinSize.Height() ) { maWinPos.Y() = maViewSize.Height() - aWinSize.Height(); bChanged = true; } if ( aWinSize.Width() > maViewSize.Width() || maWinPos.X() < 0 ) { maWinPos.X() = maViewSize.Width() / 2 - aWinSize.Width() / 2; bChanged = true; } if ( aWinSize.Height() > maViewSize.Height() || maWinPos.Y() < 0 ) { maWinPos.Y() = maViewSize.Height() / 2 - aWinSize.Height() / 2; bChanged = true; } } UpdateMapMode (); maPrevSize = aWinSize; // When tiled rendering, the above UpdateMapMode() call doesn't touch the map mode. if (bChanged && bInvalidate && !comphelper::LibreOfficeKit::isActive()) Invalidate(); } void Window::UpdateMapMode() { maWinPos -= maViewOrigin; Size aPix(maWinPos.X(), maWinPos.Y()); aPix = LogicToPixel(aPix); // Size has to be a multiple of BRUSH_SIZE due to the correct depiction of // pattern // #i2237# // removed old stuff here which still forced zoom to be // %BRUSH_SIZE which is outdated now if (mpViewShell && dynamic_cast< DrawViewShell *>( mpViewShell ) != nullptr) { // page should not "stick" to the window border if (aPix.Width() == 0) { // #i2237# // Since BRUSH_SIZE alignment is outdated now, i use the // former constant here directly aPix.Width() -= 8; } if (aPix.Height() == 0) { // #i2237# // Since BRUSH_SIZE alignment is outdated now, i use the // former constant here directly aPix.Height() -= 8; } } aPix = PixelToLogic(aPix); maWinPos.X() = aPix.Width(); maWinPos.Y() = aPix.Height(); Point aNewOrigin (-maWinPos.X(), -maWinPos.Y()); maWinPos += maViewOrigin; if (!comphelper::LibreOfficeKit::isActive()) { MapMode aMap(GetMapMode()); aMap.SetOrigin(aNewOrigin); SetMapMode(aMap); } } /** * @returns X position of the visible area as fraction (< 1) of the whole * working area. */ double Window::GetVisibleX() { return ((double) maWinPos.X() / maViewSize.Width()); } /** * @returns Y position of the visible area as fraction (< 1) of the whole * working area. */ double Window::GetVisibleY() { return ((double) maWinPos.Y() / maViewSize.Height()); } /** * Set x and y position of the visible area as fraction (< 1) of the whole * working area. Negative values are ignored. */ void Window::SetVisibleXY(double fX, double fY) { long nOldX = maWinPos.X(); long nOldY = maWinPos.Y(); if ( fX >= 0 ) maWinPos.X() = (long) (fX * maViewSize.Width()); if ( fY >= 0 ) maWinPos.Y() = (long) (fY * maViewSize.Height()); UpdateMapOrigin(false); Scroll(nOldX - maWinPos.X(), nOldY - maWinPos.Y(), ScrollFlags::Children); Update(); } /** * @returns width of the visible area in proportion to the width of the whole * working area. */ double Window::GetVisibleWidth() { Size aWinSize = PixelToLogic(GetOutputSizePixel()); if ( aWinSize.Width() > maViewSize.Width() ) aWinSize.Width() = maViewSize.Width(); return ((double) aWinSize.Width() / maViewSize.Width()); } /** * @returns height of the visible area in proportion to the height of the whole * working area. */ double Window::GetVisibleHeight() { Size aWinSize = PixelToLogic(GetOutputSizePixel()); if ( aWinSize.Height() > maViewSize.Height() ) aWinSize.Height() = maViewSize.Height(); return ((double) aWinSize.Height() / maViewSize.Height()); } /** * @returns width of a scroll column in proportion to the width of the whole * working area. */ double Window::GetScrlLineWidth() { return (GetVisibleWidth() * SCROLL_LINE_FACT); } /** * @returns height of a scroll column in proportion to the height of the whole * working area. */ double Window::GetScrlLineHeight() { return (GetVisibleHeight() * SCROLL_LINE_FACT); } /** * @returns width of a scroll page in proportion to the width of the whole * working area. */ double Window::GetScrlPageWidth() { return (GetVisibleWidth() * SCROLL_PAGE_FACT); } /** * @returns height of a scroll page in proportion to the height of the whole * working area. */ double Window::GetScrlPageHeight() { return (GetVisibleHeight() * SCROLL_PAGE_FACT); } /** * Deactivate window. */ void Window::LoseFocus() { mnTicks = 0; vcl::Window::LoseFocus (); } /** * Activate window. */ void Window::GrabFocus() { mnTicks = 0; vcl::Window::GrabFocus (); } void Window::DataChanged( const DataChangedEvent& rDCEvt ) { vcl::Window::DataChanged( rDCEvt ); /* Omit PRINTER by all documents which are not using a printer. Omit FONTS and FONTSUBSTITUTION if no text output is available or if the document does not allow text. */ if ( (rDCEvt.GetType() == DataChangedEventType::PRINTER) || (rDCEvt.GetType() == DataChangedEventType::DISPLAY) || (rDCEvt.GetType() == DataChangedEventType::FONTS) || (rDCEvt.GetType() == DataChangedEventType::FONTSUBSTITUTION) || ((rDCEvt.GetType() == DataChangedEventType::SETTINGS) && (rDCEvt.GetFlags() & AllSettingsFlags::STYLE)) ) { if ( (rDCEvt.GetType() == DataChangedEventType::SETTINGS) && (rDCEvt.GetFlags() & AllSettingsFlags::STYLE) ) { /* Rearrange or initiate Resize for scroll bars since the size of the scroll bars my have changed. Within this, inside the resize- handler, the size of the scroll bars will be asked from the Settings. */ Resize(); /* Re-set data, which are from system control or from Settings. May have to re-set more data since the resolution may also has changed. */ if( mpViewShell ) { const StyleSettings& rStyleSettings = GetSettings().GetStyleSettings(); SvtAccessibilityOptions aAccOptions; DrawModeFlags nOutputMode; sal_uInt16 nPreviewSlot; if( rStyleSettings.GetHighContrastMode() ) nOutputMode = sd::OUTPUT_DRAWMODE_CONTRAST; else nOutputMode = sd::OUTPUT_DRAWMODE_COLOR; if( rStyleSettings.GetHighContrastMode() && aAccOptions.GetIsForPagePreviews() ) nPreviewSlot = SID_PREVIEW_QUALITY_CONTRAST; else nPreviewSlot = SID_PREVIEW_QUALITY_COLOR; if( dynamic_cast< DrawViewShell *>( mpViewShell ) != nullptr ) { SetDrawMode( nOutputMode ); mpViewShell->GetFrameView()->SetDrawMode( nOutputMode ); Invalidate(); } // Overwrite window color for OutlineView if( dynamic_cast< OutlineViewShell *>( mpViewShell ) != nullptr ) { svtools::ColorConfig aColorConfig; const Color aDocColor( aColorConfig.GetColorValue( svtools::DOCCOLOR ).nColor ); SetBackground( Wallpaper( aDocColor ) ); } SfxRequest aReq( nPreviewSlot, SfxCallMode::SLOT, mpViewShell->GetDocSh()->GetDoc()->GetItemPool() ); mpViewShell->ExecReq( aReq ); mpViewShell->Invalidate(); mpViewShell->ArrangeGUIElements(); // re-create handles to show new outfit if(dynamic_cast< DrawViewShell *>( mpViewShell ) != nullptr) { mpViewShell->GetView()->AdjustMarkHdl(); } } } if ( (rDCEvt.GetType() == DataChangedEventType::DISPLAY) || ((rDCEvt.GetType() == DataChangedEventType::SETTINGS) && (rDCEvt.GetFlags() & AllSettingsFlags::STYLE)) ) { /* Virtual devices, which also depends on the resolution or the system control, should be updated. Otherwise, we should update the virtual devices at least at DataChangedEventType::DISPLAY since some systems allow to change the resolution and color depth during runtime. Or the virtual devices have to be updated when the color palette has changed since a different color matching can be used when outputting. */ } if ( rDCEvt.GetType() == DataChangedEventType::FONTS ) { /* If the document provides font choose boxes, we have to update them. I don't know how this looks like (also not really me, I only translated the comment ;). We may can handle it global. We have to discuss it with PB, but he is ill at the moment. Before we handle it here, discuss it with PB and me. */ } if ( (rDCEvt.GetType() == DataChangedEventType::FONTS) || (rDCEvt.GetType() == DataChangedEventType::FONTSUBSTITUTION) ) { /* Do reformating since the fonts of the document may no longer exist, or exist now, or are replaced with others. */ if( mpViewShell ) { DrawDocShell* pDocSh = mpViewShell->GetDocSh(); if( pDocSh ) pDocSh->SetPrinter( pDocSh->GetPrinter( true ) ); } } if ( rDCEvt.GetType() == DataChangedEventType::PRINTER ) { /* I don't know how the handling should look like. Maybe we delete a printer and look what we have to do. Maybe I have to add something to the VCL, in case the used printer is deleted. Otherwise I may recalculate the formatting here if the current printer is destroyed. */ if( mpViewShell ) { DrawDocShell* pDocSh = mpViewShell->GetDocSh(); if( pDocSh ) pDocSh->SetPrinter( pDocSh->GetPrinter( true ) ); } } // Update everything Invalidate(); } } sal_Int8 Window::AcceptDrop( const AcceptDropEvent& rEvt ) { sal_Int8 nRet = DND_ACTION_NONE; if( mpViewShell && !mpViewShell->GetDocSh()->IsReadOnly() ) { if( mpViewShell ) nRet = mpViewShell->AcceptDrop( rEvt, *this, this, SDRPAGE_NOTFOUND, SDRLAYER_NOTFOUND ); if (mbUseDropScroll && dynamic_cast< OutlineViewShell *>( mpViewShell ) == nullptr) DropScroll( rEvt.maPosPixel ); } return nRet; } sal_Int8 Window::ExecuteDrop( const ExecuteDropEvent& rEvt ) { sal_Int8 nRet = DND_ACTION_NONE; if( mpViewShell ) { nRet = mpViewShell->ExecuteDrop( rEvt, *this, this, SDRPAGE_NOTFOUND, SDRLAYER_NOTFOUND ); } return nRet; } void Window::SetUseDropScroll (bool bUseDropScroll) { mbUseDropScroll = bUseDropScroll; } void Window::DropScroll(const Point& rMousePos) { short nDx = 0; short nDy = 0; Size aSize = GetOutputSizePixel(); if (aSize.Width() > SCROLL_SENSITIVE * 3) { if ( rMousePos.X() < SCROLL_SENSITIVE ) { nDx = -1; } if ( rMousePos.X() >= aSize.Width() - SCROLL_SENSITIVE ) { nDx = 1; } } if (aSize.Height() > SCROLL_SENSITIVE * 3) { if ( rMousePos.Y() < SCROLL_SENSITIVE ) { nDy = -1; } if ( rMousePos.Y() >= aSize.Height() - SCROLL_SENSITIVE ) { nDy = 1; } } if ( (nDx || nDy) && (rMousePos.X()!=0 || rMousePos.Y()!=0 ) ) { if (mnTicks > 20) mpViewShell->ScrollLines(nDx, nDy); else mnTicks ++; } } css::uno::Reference Window::CreateAccessible() { // If current viewshell is PresentationViewShell, just return empty because the correct ShowWin will be created later. if (mpViewShell && dynamic_cast< PresentationViewShell *>( mpViewShell ) != nullptr) { return vcl::Window::CreateAccessible (); } css::uno::Reference< css::accessibility::XAccessible > xAcc = GetAccessible(false); if (xAcc.get()) { return xAcc; } if (mpViewShell != nullptr) { xAcc = mpViewShell->CreateAccessibleDocumentView (this); SetAccessible(xAcc); return xAcc; } else { SAL_WARN("sd", "::sd::Window::CreateAccessible: no view shell"); return vcl::Window::CreateAccessible (); } } OUString Window::GetSurroundingText() const { if ( mpViewShell->GetShellType() == ViewShell::ST_OUTLINE ) return OUString(); else if ( mpViewShell->GetView()->IsTextEdit() ) { OutlinerView *pOLV = mpViewShell->GetView()->GetTextEditOutlinerView(); return pOLV->GetEditView().GetSurroundingText(); } return OUString(); } Selection Window::GetSurroundingTextSelection() const { if ( mpViewShell->GetShellType() == ViewShell::ST_OUTLINE ) { return Selection( 0, 0 ); } else if ( mpViewShell->GetView()->IsTextEdit() ) { OutlinerView *pOLV = mpViewShell->GetView()->GetTextEditOutlinerView(); return pOLV->GetEditView().GetSurroundingTextSelection(); } else { return Selection( 0, 0 ); } } void Window::LogicInvalidate(const ::tools::Rectangle* pRectangle) { DrawViewShell* pDrawViewShell = dynamic_cast(mpViewShell); if (pDrawViewShell && pDrawViewShell->IsInSwitchPage()) return; OString sRectangle; if (!pRectangle) sRectangle = "EMPTY"; else { ::tools::Rectangle aRectangle(*pRectangle); if (GetMapMode().GetMapUnit() == MapUnit::Map100thMM) aRectangle = OutputDevice::LogicToLogic(aRectangle, MapUnit::Map100thMM, MapUnit::MapTwip); sRectangle = aRectangle.toString(); } SfxViewShell& rSfxViewShell = mpViewShell->GetViewShellBase(); SfxLokHelper::notifyInvalidation(&rSfxViewShell, sRectangle); } FactoryFunction Window::GetUITestFactory() const { if (get_id() == "impress_win") return ImpressWindowUIObject::create; return WindowUIObject::create; } } // end of namespace sd /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ libreoffice-5-0-2'>libreoffice-5-0-2 LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/sc/CppunitTest_sc_copypaste.mk
AgeCommit message (Expand)Author
2019-10-04add gbuild function for a common PCH and use it in sc/ and sax/Luboš Luňák
2018-05-31SwModule is a convenient (?) place for passing events to Automation clientsTor Lillqvist
2018-04-27Remove remaining references to xsec_xmlsec.windowsMiklos Vajna
2018-03-11Move (and rename) graphic stuff from svtools to vclTomaž Vajngerl
2017-04-21gbuild: Remove MSVC 2013 legacy codeDavid Ostrovsky
2017-01-26[API CHANGE] offapi: remove unused xsec_fw UNO servicesMiklos Vajna
2016-07-28Revert "temp tinderbox fix"Caolán McNamara
2016-06-09tdf#94698 cleanup Makefiles. Get rid of udkapi and offapiGleb Mishchenko
2016-03-08sc: remove unnecessary orcus external usage from makefilesMichael Stahl
2015-05-13extract copy&paste test from import testsMarkus Mohrhard