/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include "printhelper.hxx" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define SFX_PRINTABLESTATE_CANCELJOB -2 using namespace ::com::sun::star; using namespace ::com::sun::star::uno; struct IMPL_PrintListener_DataContainer : public SfxListener { SfxObjectShellRef m_pObjectShell; ::cppu::OMultiTypeInterfaceContainerHelper m_aInterfaceContainer; uno::Reference< com::sun::star::view::XPrintJob> m_xPrintJob; ::com::sun::star::uno::Sequence< ::com::sun::star::beans::PropertyValue > m_aPrintOptions; IMPL_PrintListener_DataContainer( ::osl::Mutex& aMutex) : m_pObjectShell ( 0 ) , m_aInterfaceContainer ( aMutex ) { } void Notify( SfxBroadcaster& aBC , const SfxHint& aHint ) ; }; awt::Size impl_Size_Object2Struct( const Size& aSize ) { awt::Size aReturnValue; aReturnValue.Width = aSize.Width() ; aReturnValue.Height = aSize.Height() ; return aReturnValue ; } Size impl_Size_Struct2Object( const awt::Size& aSize ) { Size aReturnValue; aReturnValue.Width() = aSize.Width ; aReturnValue.Height() = aSize.Height ; return aReturnValue ; } class SfxPrintJob_Impl : public cppu::WeakImplHelper1 < com::sun::star::view::XPrintJob > { IMPL_PrintListener_DataContainer* m_pData; public: SfxPrintJob_Impl( IMPL_PrintListener_DataContainer* pData ); virtual Sequence< ::com::sun::star::beans::PropertyValue > SAL_CALL getPrintOptions( ) throw (RuntimeException); virtual Sequence< ::com::sun::star::beans::PropertyValue > SAL_CALL getPrinter( ) throw (RuntimeException); virtual Reference< ::com::sun::star::view::XPrintable > SAL_CALL getPrintable( ) throw (RuntimeException); virtual void SAL_CALL cancelJob() throw (RuntimeException); }; SfxPrintJob_Impl::SfxPrintJob_Impl( IMPL_PrintListener_DataContainer* pData ) : m_pData( pData ) { } Sequence< ::com::sun::star::beans::PropertyValue > SAL_CALL SfxPrintJob_Impl::getPrintOptions() throw (RuntimeException) { return m_pData->m_aPrintOptions; } Sequence< ::com::sun::star::beans::PropertyValue > SAL_CALL SfxPrintJob_Impl::getPrinter() throw (RuntimeException) { if( m_pData->m_pObjectShell.Is() ) { Reference < view::XPrintable > xPrintable( m_pData->m_pObjectShell->GetModel(), UNO_QUERY ); if ( xPrintable.is() ) return xPrintable->getPrinter(); } return Sequence< ::com::sun::star::beans::PropertyValue >(); } Reference< ::com::sun::star::view::XPrintable > SAL_CALL SfxPrintJob_Impl::getPrintable() throw (RuntimeException) { Reference < view::XPrintable > xPrintable( m_pData->m_pObjectShell.Is() ? m_pData->m_pObjectShell->GetModel() : NULL, UNO_QUERY ); return xPrintable; } void SAL_CALL SfxPrintJob_Impl::cancelJob() throw (RuntimeException) { // FIXME: how to cancel PrintJob via API?! if( m_pData->m_pObjectShell.Is() ) m_pData->m_pObjectShell->Broadcast( SfxPrintingHint( SFX_PRINTABLESTATE_CANCELJOB ) ); } SfxPrintHelper::SfxPrintHelper() { m_pData = new IMPL_PrintListener_DataContainer(m_aMutex); } void SAL_CALL SfxPrintHelper::initialize( const ::com::sun::star::uno::Sequence< ::com::sun::star::uno::Any >& aArguments ) throw (::com::sun::star::uno::Exception, ::com::sun::star::uno::RuntimeException) { if ( aArguments.getLength() ) { com::sun::star::uno::Reference < com::sun::star::frame::XModel > xModel; aArguments[0] >>= xModel; uno::Reference < lang::XUnoTunnel > xObj( xModel, uno::UNO_QUERY ); uno::Sequence < sal_Int8 > aSeq( SvGlobalName( SFX_GLOBAL_CLASSID ).GetByteSequence() ); sal_Int64 nHandle = xObj->getSomething( aSeq ); if ( nHandle ) { m_pData->m_pObjectShell = reinterpret_cast< SfxObjectShell* >( sal::static_int_cast< sal_IntPtr >( nHandle )); m_pData->StartListening(*m_pData->m_pObjectShell); } } } SfxPrintHelper::~SfxPrintHelper() { delete m_pData; } namespace { view::PaperFormat convertToPaperFormat(Paper eFormat) { view::PaperFormat eRet; switch (eFormat) { case PAPER_A3: eRet = view::PaperFormat_A3; break; case PAPER_A4: eRet = view::PaperFormat_A4; break; case PAPER_A5: eRet = view::PaperFormat_A5; break; case PAPER_B4_ISO: eRet = view::PaperFormat_B4; break; case PAPER_B5_ISO: eRet = view::PaperFormat_B5; break; case PAPER_LETTER: eRet = view::PaperFormat_LETTER; break; case PAPER_LEGAL: eRet = view::PaperFormat_LEGAL; break; case PAPER_TABLOID: eRet = view::PaperFormat_TABLOID; break; case PAPER_USER: default: eRet = view::PaperFormat_USER; break; } return eRet; } Paper convertToPaper(view::PaperFormat eFormat) { Paper eRet(PAPER_USER); switch (eFormat) { case view::PaperFormat_A3: eRet = PAPER_A3; break; case view::PaperFormat_A4: eRet = PAPER_A4; break; case view::PaperFormat_A5: eRet = PAPER_A5; break; case view::PaperFormat_B4: eRet = PAPER_B4_ISO; break; case view::PaperFormat_B5: eRet = PAPER_B5_ISO; break; case view::PaperFormat_LETTER: eRet = PAPER_LETTER; break; case view::PaperFormat_LEGAL: eRet = PAPER_LEGAL; break; case view::PaperFormat_TABLOID: eRet = PAPER_TABLOID; break; case view::PaperFormat_USER: eRet = PAPER_USER; break; case view::PaperFormat_MAKE_FIXED_SIZE: break; //deliberate no default to force warn on a new papersize } return eRet; } } //________________________________________________________________________________________________________ // XPrintable //________________________________________________________________________________________________________ uno::Sequence< beans::PropertyValue > SAL_CALL SfxPrintHelper::getPrinter() throw(::com::sun::star::uno::RuntimeException) { // object already disposed? SolarMutexGuard aGuard; // search for any view of this document that is currently printing const Printer *pPrinter = NULL; SfxViewFrame *pViewFrm = m_pData->m_pObjectShell.Is() ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, sal_False ) : 0; SfxViewFrame* pFirst = pViewFrm; while ( pViewFrm && !pPrinter ) { pPrinter = pViewFrm->GetViewShell()->GetActivePrinter(); pViewFrm = SfxViewFrame::GetNext( *pViewFrm, m_pData->m_pObjectShell, sal_False ); } // if no view is printing currently, use the permanent SfxPrinter instance if ( !pPrinter && pFirst ) pPrinter = pFirst->GetViewShell()->GetPrinter(sal_True); if ( !pPrinter ) return uno::Sequence< beans::PropertyValue >(); uno::Sequence< beans::PropertyValue > aPrinter(8); aPrinter.getArray()[7].Name = "CanSetPaperSize"; aPrinter.getArray()[7].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_PAPERSIZE ) ); aPrinter.getArray()[6].Name = "CanSetPaperFormat"; aPrinter.getArray()[6].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_PAPER ) ); aPrinter.getArray()[5].Name = "CanSetPaperOrientation"; aPrinter.getArray()[5].Value <<= ( pPrinter->HasSupport( SUPPORT_SET_ORIENTATION ) ); aPrinter.getArray()[4].Name = "IsBusy"; aPrinter.getArray()[4].Value <<= ( pPrinter->IsPrinting() ); aPrinter.getArray()[3].Name = "PaperSize"; awt::Size aSize = impl_Size_Object2Struct(pPrinter->GetPaperSize() ); aPrinter.getArray()[3].Value <<= aSize; aPrinter.getArray()[2].Name = "PaperFormat"; view::PaperFormat eFormat = convertToPaperFormat(pPrinter->GetPaper()); aPrinter.getArray()[2].Value <<= eFormat; aPrinter.getArray()[1].Name = "PaperOrientation"; view::PaperOrientation eOrient = (view::PaperOrientation)pPrinter->GetOrientation(); aPrinter.getArray()[1].Value <<= eOrient; aPrinter.getArray()[0].Name = "Name"; OUString sStringTemp = pPrinter->GetName() ; aPrinter.getArray()[0].Value <<= sStringTemp; return aPrinter; } //________________________________________________________________________________________________________ // XPrintable //________________________________________________________________________________________________________ void SfxPrintHelper::impl_setPrinter(const uno::Sequence< beans::PropertyValue >& rPrinter,SfxPrinter*& pPrinter,sal_uInt16& nChangeFlags,SfxViewShell*& pViewSh) { // Get old Printer SfxViewFrame *pViewFrm = m_pData->m_pObjectShell.Is() ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, sal_False ) : 0; if ( !pViewFrm ) return; pViewSh = pViewFrm->GetViewShell(); pPrinter = pViewSh->GetPrinter(sal_True); if ( !pPrinter ) return; // new Printer-Name available? nChangeFlags = 0; sal_Int32 lDummy = 0; for ( int n = 0; n < rPrinter.getLength(); ++n ) { // get Property-Value from printer description const beans::PropertyValue &rProp = rPrinter.getConstArray()[n]; // Name-Property? if ( rProp.Name.equalsAscii( "Name" ) ) { OUString aPrinterName; if ( ! ( rProp.Value >>= aPrinterName ) ) throw ::com::sun::star::lang::IllegalArgumentException(); if ( aPrinterName != pPrinter->GetName() ) { pPrinter = new SfxPrinter( pPrinter->GetOptions().Clone(), aPrinterName ); nChangeFlags = SFX_PRINTER_PRINTER; } break; } } Size aSetPaperSize( 0, 0); view::PaperFormat nPaperFormat = view::PaperFormat_USER; // other properties for ( int i = 0; i < rPrinter.getLength(); ++i ) { // get Property-Value from printer description const beans::PropertyValue &rProp = rPrinter.getConstArray()[i]; // PaperOrientation-Property? if ( rProp.Name.equalsAscii( "PaperOrientation" ) ) { view::PaperOrientation eOrient; if ( ( rProp.Value >>= eOrient ) == sal_False ) { if ( ( rProp.Value >>= lDummy ) == sal_False ) throw ::com::sun::star::lang::IllegalArgumentException(); eOrient = ( view::PaperOrientation) lDummy; } if ( (Orientation) eOrient != pPrinter->GetOrientation() ) { pPrinter->SetOrientation( (Orientation) eOrient ); nChangeFlags |= SFX_PRINTER_CHG_ORIENTATION; } } // PaperFormat-Property? else if ( rProp.Name.equalsAscii( "PaperFormat" ) ) { if ( ( rProp.Value >>= nPaperFormat ) == sal_False ) { if ( ( rProp.Value >>= lDummy ) == sal_False ) throw ::com::sun::star::lang::IllegalArgumentException(); nPaperFormat = ( view::PaperFormat ) lDummy; } if ( convertToPaper(nPaperFormat) != pPrinter->GetPaper() ) { pPrinter->SetPaper( convertToPaper(nPaperFormat) ); nChangeFlags |= SFX_PRINTER_CHG_SIZE; } } // PaperSize-Property? else if ( rProp.Name.equalsAscii( "PaperSize" ) ) { awt::Size aTempSize ; if ( ( rProp.Value >>= aTempSize ) == sal_False ) { throw ::com::sun::star::lang::IllegalArgumentException(); } else { aSetPaperSize = impl_Size_Struct2Object(aTempSize); } } // PrinterTray-Property else if ( rProp.Name.equalsAscii( "PrinterPaperTray" ) ) { OUString aTmp; if ( ( rProp.Value >>= aTmp ) == sal_False ) throw ::com::sun::star::lang::IllegalArgumentException(); sal_uInt16 nCount = pPrinter->GetPaperBinCount(); for (sal_uInt16 nBin=0; nBinGetPaperBinName(nBin) ); if ( aName == aTmp ) { pPrinter->SetPaperBin(nBin); break; } } } } // The PaperSize may be set only when actually PAPER_USER // applies, otherwise the driver could choose a invalid format. if(nPaperFormat == view::PaperFormat_USER && aSetPaperSize.Width()) { // Bug 56929 - MapMode of 100mm which recalculated when // the device is set. Additionally only set if they were really changed. aSetPaperSize = pPrinter->LogicToPixel( aSetPaperSize, MAP_100TH_MM ); if( aSetPaperSize != pPrinter->GetPaperSizePixel() ) { pPrinter->SetPaperSizeUser( pPrinter->PixelToLogic( aSetPaperSize ) ); nChangeFlags |= SFX_PRINTER_CHG_SIZE; } } //wait until printing is done SfxPrinter* pDocPrinter = pViewSh->GetPrinter(); while ( pDocPrinter->IsPrinting() ) Application::Yield(); } void SAL_CALL SfxPrintHelper::setPrinter(const uno::Sequence< beans::PropertyValue >& rPrinter) throw (::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::uno::RuntimeException) { // object already disposed? SolarMutexGuard aGuard; SfxViewShell* pViewSh = NULL; SfxPrinter* pPrinter = NULL; sal_uInt16 nChangeFlags = 0; impl_setPrinter(rPrinter,pPrinter,nChangeFlags,pViewSh); // set new printer if ( pViewSh && pPrinter ) pViewSh->SetPrinter( pPrinter, nChangeFlags, false ); } //________________________________________________________________________________________________________ // ImplPrintWatch thread for asynchronous printing with moving temp. file to ucb location //________________________________________________________________________________________________________ /* This implements a thread which will be started to wait for asynchronous print jobs to temp. localy files. If they finish we move the temp. files to her right locations by using the ucb. */ class ImplUCBPrintWatcher : public ::osl::Thread { private: /// of course we must know the printer which execute the job SfxPrinter* m_pPrinter; /// this describes the target location for the printed temp file OUString m_sTargetURL; /// it holds the temp file alive, till the print job will finish and remove it from disk automaticly if the object die ::utl::TempFile* m_pTempFile; public: /* initialize this watcher but don't start it */ ImplUCBPrintWatcher( SfxPrinter* pPrinter, ::utl::TempFile* pTempFile, const OUString& sTargetURL ) : m_pPrinter ( pPrinter ) , m_sTargetURL( sTargetURL ) , m_pTempFile ( pTempFile ) {} /* waits for finishing of the print job and moves the temp file afterwards Note: Starting of the job is done outside this thread! But we have to free some of the given resources on heap! */ void SAL_CALL run() { /* SAFE { */ { SolarMutexGuard aGuard; while( m_pPrinter->IsPrinting() ) Application::Yield(); m_pPrinter = NULL; // don't delete it! It's borrowed only :-) } /* } SAFE */ // lock for further using of our member isn't necessary - because // we truns alone by defenition. Nobody join for us nor use us ... moveAndDeleteTemp(&m_pTempFile,m_sTargetURL); // finishing of this run() method will call onTerminate() automaticly // kill this thread there! } /* nobody wait for this thread. We must kill ourself ... */ void SAL_CALL onTerminated() { delete this; } /* static helper to move the temp. file to the target location by using the ucb It's static to be useable from outside too. So it's not realy neccessary to start the thread, if finishing of the job was detected outside this thread. But it must be called without using a corresponding thread for the given parameter! */ static void moveAndDeleteTemp( ::utl::TempFile** ppTempFile, const OUString& sTargetURL ) { // move the file try { INetURLObject aSplitter(sTargetURL); OUString sFileName = aSplitter.getName( INetURLObject::LAST_SEGMENT, true, INetURLObject::DECODE_WITH_CHARSET); if (aSplitter.removeSegment() && !sFileName.isEmpty()) { ::ucbhelper::Content aSource( OUString((*ppTempFile)->GetURL()), ::com::sun::star::uno::Reference< ::com::sun::star::ucb::XCommandEnvironment >(), comphelper::getProcessComponentContext()); ::ucbhelper::Content aTarget( OUString(aSplitter.GetMainURL(INetURLObject::NO_DECODE)), ::com::sun::star::uno::Reference< ::com::sun::star::ucb::XCommandEnvironment >(), comphelper::getProcessComponentContext()); aTarget.transferContent( aSource, ::ucbhelper::InsertOperation_COPY, OUString(sFileName), ::com::sun::star::ucb::NameClash::OVERWRITE); } } catch (const ::com::sun::star::ucb::ContentCreationException&) { OSL_FAIL("content create exception"); } catch (const ::com::sun::star::ucb::CommandAbortedException&) { OSL_FAIL("command abort exception"); } catch (const ::com::sun::star::uno::RuntimeException&) { OSL_FAIL("runtime exception"); } catch (const ::com::sun::star::uno::Exception&) { OSL_FAIL("unknown exception"); } // kill the temp file! delete *ppTempFile; *ppTempFile = NULL; } }; //------------------------------------------------ //________________________________________________________________________________________________________ // XPrintable //________________________________________________________________________________________________________ void SAL_CALL SfxPrintHelper::print(const uno::Sequence< beans::PropertyValue >& rOptions) throw (::com::sun::star::lang::IllegalArgumentException, ::com::sun::star::uno::RuntimeException) { if( Application::GetSettings().GetMiscSettings().GetDisablePrinting() ) return; // object already disposed? // object already disposed? SolarMutexGuard aGuard; // get view for sfx printing capabilities SfxViewFrame *pViewFrm = m_pData->m_pObjectShell.Is() ? SfxViewFrame::GetFirst( m_pData->m_pObjectShell, sal_False ) : 0; if ( !pViewFrm ) return; SfxViewShell* pView = pViewFrm->GetViewShell(); if ( !pView ) return; sal_Bool bMonitor = sal_False; // We need this information at the end of this method, if we start the vcl printer // by executing the slot. Because if it is a ucb relevant URL we must wait for // finishing the print job and move the temporary local file by using the ucb // to the right location. But in case of no file name is given or it is already // a local one we can supress this special handling. Because then vcl makes all // right for us. OUString sUcbUrl; ::utl::TempFile* pUCBPrintTempFile = NULL; uno::Sequence < beans::PropertyValue > aCheckedArgs( rOptions.getLength() ); sal_Int32 nProps = 0; sal_Bool bWaitUntilEnd = sal_False; sal_Int16 nDuplexMode = ::com::sun::star::view::DuplexMode::UNKNOWN; for ( int n = 0; n < rOptions.getLength(); ++n ) { // get Property-Value from options const beans::PropertyValue &rProp = rOptions.getConstArray()[n]; // FileName-Property? if ( rProp.Name.equalsAscii( "FileName" ) ) { // unpack th URL and check for a valid and well known protocol OUString sTemp; if ( ( rProp.Value.getValueType()!=::getCppuType((const OUString*)0)) || (!(rProp.Value>>=sTemp)) ) { throw ::com::sun::star::lang::IllegalArgumentException(); } OUString sPath ; OUString sURL (sTemp); INetURLObject aCheck(sURL ); if (aCheck.GetProtocol()==INET_PROT_NOT_VALID) { // OK - it's not a valid URL. But may it's a simple // system path directly. It will be supported for historical // reasons. Otherwhise we break to much external code ... // We try to convert it to a file URL. If its possible // we put the system path to the item set and let vcl work with it. // No ucb or thread will be necessary then. In case it couldnt be // converted its not an URL nor a system path. Then we can't accept // this parameter and have to throw an exception. OUString sSystemPath(sTemp); OUString sFileURL; if (::osl::FileBase::getFileURLFromSystemPath(sSystemPath,sFileURL)!=::osl::FileBase::E_None) throw ::com::sun::star::lang::IllegalArgumentException(); aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= sFileURL; // and append the local filename aCheckedArgs.realloc( aCheckedArgs.getLength()+1 ); aCheckedArgs[nProps].Name = "LocalFileName"; aCheckedArgs[nProps++].Value <<= OUString( sTemp ); } else // It's a valid URL. but now we must know, if it is a local one or not. // It's a question of using ucb or not! if (::utl::LocalFileHelper::ConvertURLToSystemPath(sURL,sPath)) { // it's a local file, we can use vcl without special handling // And we have to use the system notation of the incoming URL. // But it into the descriptor and let the slot be executed at // the end of this method. aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= sTemp; // and append the local filename aCheckedArgs.realloc( aCheckedArgs.getLength()+1 ); aCheckedArgs[nProps].Name = "LocalFileName"; aCheckedArgs[nProps++].Value <<= sPath; } else { // it's an ucb target. So we must use a temp. file for vcl // and move it after printing by using the ucb. // Create a temp file on the heap (because it must delete the // real file on disk automaticly if it die - bt we have to share it with // some other sources ... e.g. the ImplUCBPrintWatcher). // And we put the name of this temp file to the descriptor instead // of the URL. The URL we save for later using separately. // Execution of the print job will be done later by executing // a slot ... if(!pUCBPrintTempFile) pUCBPrintTempFile = new ::utl::TempFile(); pUCBPrintTempFile->EnableKillingFile(); //FIXME: does it work? aCheckedArgs[nProps].Name = "LocalFileName"; aCheckedArgs[nProps++].Value <<= OUString( pUCBPrintTempFile->GetFileName() ); sUcbUrl = sURL; } } // CopyCount-Property else if ( rProp.Name.equalsAscii( "CopyCount" ) ) { sal_Int32 nCopies = 0; if ( ( rProp.Value >>= nCopies ) == sal_False ) throw ::com::sun::star::lang::IllegalArgumentException(); aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= nCopies; } // Collate-Property // Sort-Property (deprecated) else if ( rProp.Name.equalsAscii( "Collate" ) || rProp.Name.equalsAscii( "Sort" ) ) { sal_Bool bTemp = sal_Bool(); if ( rProp.Value >>= bTemp ) { aCheckedArgs[nProps].Name = "Collate"; aCheckedArgs[nProps++].Value <<= bTemp; } else throw ::com::sun::star::lang::IllegalArgumentException(); } // Pages-Property else if ( rProp.Name.equalsAscii( "Pages" ) ) { OUString sTemp; if( rProp.Value >>= sTemp ) { aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= sTemp; } else throw ::com::sun::star::lang::IllegalArgumentException(); } // MonitorVisible else if ( rProp.Name.equalsAscii( "MonitorVisible" ) ) { if( !(rProp.Value >>= bMonitor) ) throw ::com::sun::star::lang::IllegalArgumentException(); aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= bMonitor; } // Wait else if ( rProp.Name.equalsAscii( "Wait" ) ) { if ( !(rProp.Value >>= bWaitUntilEnd) ) throw ::com::sun::star::lang::IllegalArgumentException(); aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= bWaitUntilEnd; } else if ( rProp.Name.equalsAscii( "DuplexMode" ) ) { if ( !(rProp.Value >>= nDuplexMode ) ) throw ::com::sun::star::lang::IllegalArgumentException(); aCheckedArgs[nProps].Name = rProp.Name; aCheckedArgs[nProps++].Value <<= nDuplexMode; } } if ( nProps != aCheckedArgs.getLength() ) aCheckedArgs.realloc(nProps); // Execute the print request every time. // It doesn'tmatter if it is a real printer used or we print to a local file // nor if we print to a temp file and move it afterwards by using the ucb. // That will be handled later. see pUCBPrintFile below! pView->ExecPrint( aCheckedArgs, sal_True, sal_False ); // Ok - may be execution before has finished (or started!) printing. // And may it was a printing to a file. // Now we have to check if we can move the file (if necessary) via ucb to his right location. // Cases: // a) printing finished => move the file directly and forget the watcher thread // b) printing is asynchron and runs currently => start watcher thread and exit this method // This thread make all necessary things by itself. if (pUCBPrintTempFile) { // a) SfxPrinter* pPrinter = pView->GetPrinter(); if ( ! pPrinter->IsPrinting() ) ImplUCBPrintWatcher::moveAndDeleteTemp(&pUCBPrintTempFile,sUcbUrl); // b) else { // Note: we create(d) some resource on the heap. (thread and tep file) // They will be deleted by the thread automaticly if he finish his run() method. ImplUCBPrintWatcher* pWatcher = new ImplUCBPrintWatcher( pPrinter, pUCBPrintTempFile, sUcbUrl ); pWatcher->create(); } } } void IMPL_PrintListener_DataContainer::Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) { SfxPrintingHint* pPrintHint = PTR_CAST( SfxPrintingHint, &rHint ); if ( &rBC != m_pObjectShell || !pPrintHint || pPrintHint->GetWhich() == SFX_PRINTABLESTATE_CANCELJOB ) return; if ( pPrintHint->GetWhich() == com::sun::star::view::PrintableState_JOB_STARTED ) { if ( !m_xPrintJob.is() ) m_xPrintJob = new SfxPrintJob_Impl( this ); m_aPrintOptions = pPrintHint->GetOptions(); } ::cppu::OInterfaceContainerHelper* pContainer = m_aInterfaceContainer.getContainer( ::getCppuType( ( const uno::Reference< view::XPrintJobListener >*) NULL ) ); if ( !pContainer ) return; view::PrintJobEvent aEvent; aEvent.Source = m_xPrintJob; aEvent.State = (com::sun::star::view::PrintableState) pPrintHint->GetWhich(); ::cppu::OInterfaceIteratorHelper pIterator(*pContainer); while (pIterator.hasMoreElements()) ((view::XPrintJobListener*)pIterator.next())->printJobEvent( aEvent ); } void SAL_CALL SfxPrintHelper::addPrintJobListener( const ::com::sun::star::uno::Reference< ::com::sun::star::view::XPrintJobListener >& xListener ) throw (::com::sun::star::uno::RuntimeException) { SolarMutexGuard aGuard; m_pData->m_aInterfaceContainer.addInterface( ::getCppuType((const uno::Reference < view::XPrintJobListener>*)0), xListener ); } void SAL_CALL SfxPrintHelper::removePrintJobListener( const ::com::sun::star::uno::Reference< ::com::sun::star::view::XPrintJobListener >& xListener ) throw (::com::sun::star::uno::RuntimeException) { SolarMutexGuard aGuard; m_pData->m_aInterfaceContainer.removeInterface( ::getCppuType((const uno::Reference < view::XPrintJobListener>*)0), xListener ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */ 'libreoffice-5-2-5'>libreoffice-5-2-5 LibreOffice 核心代码仓库文档基金会
summaryrefslogtreecommitdiff
path: root/readlicense_oo
AgeCommit message (Expand)Author
2013-06-28credits: add back "developers not committing code since 2010-09-28"Christian Lohmaier
2013-06-23update creditsChristian Lohmaier
2013-06-20remove last uses of config 'GUI' variableMatúš Kukan
2013-06-05Update LICENSE documentAndras Timar
2013-05-04nuke MathMLDTDDavid Tardon
2013-04-29fdo#33370 Readme file could be easier to followJan Bobisud
2013-03-25Remove unneeded project and projectroot parametersZolnai Tamás
2013-03-14remove legacy build.pl prj/build.lst files.Michael Meeks
2013-02-28remove all d.lstMichael Stahl
2013-02-16Readme tweaksAndras Timar
2013-02-05scp2: copy the install script to the tarball on LinuxMiklos Vajna
2013-02-02Fix mixed unix/dos endnlines.Tomas Chvatal
2013-01-31fdo#46706 Windows 2000 is not supported any moreAndras Timar
2013-01-26gbuild: fix silly "expandtabs" in makefile VIM modelinesMichael Stahl
2013-01-26update LICENSE documentAndras Timar
2012-12-30add runtime deps for custom targetsDavid Tardon
2012-12-29rethink external executable setupDavid Tardon
2012-12-25Get rid of (most uses of) GUITor Lillqvist
2012-12-25convert external to gbuildPeter Foley
2012-12-05Bye bye ODMA (LICENSE.odt)Andras Timar
2012-12-05Bye bye ODMATor Lillqvist
2012-12-02move setting up of ext. executables out of gbuild.mkDavid Tardon
2012-12-02Make qtz work in UIZolnai Tamás
2012-11-20fix readlicense_oo makefile, po file movedAndras Timar
2012-11-20Merge branch 'feature/killsdf'Andras Timar
2012-11-20Reardme.xrm move up one directoryZolnai Tamás
2012-11-12Don't bundle gdiplus.dll any moreTor Lillqvist
2012-11-12update license document with new fontsAndras Timar
2012-11-11Merge branch 'master' into feature/killsdfAndras Timar
2012-11-07update LICENSE documentAndras Timar
2012-10-25remove all traces of saxonDavid Tardon
2012-10-13Merge branch 'master' into feature/killsdfAndras Timar
2012-10-05add ODMA licenseAndras Timar
2012-10-03rename THIRDPARTYLICENSEREADME.html to LICENSE.htmlAndras Timar
2012-10-01translations is a source-only moduleAndras Timar
2012-09-30Use po for merge of readme.xrmZolnai Tamás
2012-09-23revert all my recent changes to CustomTarget_readme.mkAndras Timar
2012-09-23Revert "Revert "fix localization of readlicense_oo""Andras Timar
2012-09-23Revert "fix localization of readlicense_oo"Andras Timar
2012-09-23fix localization of readlicense_ooAndras Timar
2012-09-23fix localization of readlicense_ooAndras Timar
2012-09-23move readme.xrm one dir upDavid Tardon
2012-09-23drop obsolete cruftDavid Tardon
2012-09-23migrate readlicense_oo to gbuildDavid Ostrovsky
2012-07-18update license documentsAndras Timar
2012-06-22.pmk files don't need executable bitsMichael Stahl
2012-06-04ALv2 licensing compliance, and first test / re-based module pair.Michael Meeks
2012-06-02fix a typo in meta.xml (Title field)Andras Timar
2012-04-29make gbuild the default assumption of build.plBjoern Michaelsen