/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "rehearsetimingsactivity.hxx" #include "waitsymbol.hxx" #include "effectrewinder.hxx" #include #include "pointersymbol.hxx" #include #include #include #include #include #include #include using namespace com::sun::star; using namespace ::slideshow::internal; namespace { /** During animations the update() method tells its caller to call it as soon as possible. This gives us more time to render the next frame and still maintain a steady frame rate. This class is responsible for synchronizing the display of new frames and thus keeping the frame rate steady. */ class FrameSynchronization { public: /** Create new object with a predefined duration between two frames. @param nFrameDuration The preferred duration between the display of two frames in seconds. */ explicit FrameSynchronization (const double nFrameDuration); /** Set the current time as the time at which the current frame is displayed. From this the target time of the next frame is derived. */ void MarkCurrentFrame(); /** When there is time left until the next frame is due then wait. Otherwise return without delay. */ void Synchronize(); /** Activate frame synchronization when an animation is active and frames are to be displayed in a steady rate. While active Synchronize() will wait until the frame duration time has passed. */ void Activate(); /** Deactivate frame sychronization when no animation is active and the time between frames depends on user actions and other external sources. While deactivated Synchronize() will return without delay. */ void Deactivate(); private: /** The timer that is used for synchronization is independent from the one used by SlideShowImpl: it is not paused or modified by animations. */ canvas::tools::ElapsedTime const maTimer; /** Time between the display of frames. Enforced only when mbIsActive is . */ const double mnFrameDuration; /** Time (of maTimer) when the next frame shall be displayed. Synchronize() will wait until this time. */ double mnNextFrameTargetTime; /** Synchronize() will wait only when this flag is . Otherwise it returns immediately. */ bool mbIsActive; }; /****************************************************************************** SlideShowImpl This class encapsulates the slideshow presentation viewer. With an instance of this class, it is possible to statically and dynamically show a presentation, as defined by the constructor-provided draw model (represented by a sequence of css::drawing::XDrawPage objects). It is possible to show the presentation on multiple views simultaneously (e.g. for a multi-monitor setup). Since this class also relies on user interaction, the corresponding XSlideShowView interface provides means to register some UI event listeners (mostly borrowed from awt::XWindow interface). Since currently (mid 2004), OOo isn't very well suited to multi-threaded rendering, this class relies on very frequent external update() calls, which will render the next frame of animations. This works as follows: after the displaySlide() has been successfully called (which setup and starts an actual slide show), the update() method must be called until it returns false. Effectively, this puts the burden of providing concurrency to the clients of this class, which, as noted above, is currently unavoidable with the current state of affairs (I've actually tried threading here, but failed miserably when using the VCL canvas as the render backend - deadlocked). ******************************************************************************/ typedef cppu::WeakComponentImplHelper SlideShowImplBase; typedef ::std::vector< ::cppcanvas::PolyPolygonSharedPtr> PolyPolygonVector; /// Maps XDrawPage for annotations persistence typedef ::std::map< css::uno::Reference< css::drawing::XDrawPage>, PolyPolygonVector> PolygonMap; class SlideShowImpl : private cppu::BaseMutex, public CursorManager, public MediaFileManager, public SlideShowImplBase { public: explicit SlideShowImpl( uno::Reference const& xContext ); /** Notify that the transition phase of the current slide has ended. The life of a slide has three phases: the transition phase, when the previous slide vanishes, and the current slide becomes visible, the shape animation phase, when shape effects are running, and the phase after the last shape animation has ended, but before the next slide transition starts. This method notifies the end of the first phase. @param bPaintSlide When true, Slide::show() is passed a true as well, denoting explicit paint of slide content. Pass false here, if e.g. a slide transition has already rendered the initial slide image. */ void notifySlideTransitionEnded( bool bPaintSlide ); /** Notify that the shape animation phase of the current slide has ended. The life of a slide has three phases: the transition phase, when the previous slide vanishes, and the current slide becomes visible, the shape animation phase, when shape effects are running, and the phase after the last shape animation has ended, but before the next slide transition starts. This method notifies the end of the second phase. */ void notifySlideAnimationsEnded(); /** Notify that the slide has ended. The life of a slide has three phases: the transition phase, when the previous slide vanishes, and the current slide becomes visible, the shape animation phase, when shape effects are running, and the phase after the last shape animation has ended, but before the next slide transition starts. This method notifies the end of the third phase. */ void notifySlideEnded (const bool bReverse); /** Notification from eventmultiplexer that a hyperlink has been clicked. */ bool notifyHyperLinkClicked( OUString const& hyperLink ); /** Notification from eventmultiplexer that an animation event has occurred. This will be forwarded to all registered XSlideShowListener */ bool handleAnimationEvent( const AnimationNodeSharedPtr& rNode ); /** Obtain a MediaTempFile for the specified url. */ virtual std::shared_ptr getMediaTempFile(const OUString& aUrl) override; private: // XSlideShow: virtual sal_Bool SAL_CALL nextEffect() override; virtual sal_Bool SAL_CALL previousEffect() override; virtual sal_Bool SAL_CALL startShapeActivity( uno::Reference const& xShape ) override; virtual sal_Bool SAL_CALL stopShapeActivity( uno::Reference const& xShape ) override; virtual sal_Bool SAL_CALL pause( sal_Bool bPauseShow ) override; virtual uno::Reference SAL_CALL getCurrentSlide() override; virtual void SAL_CALL displaySlide( uno::Reference const& xSlide, uno::Reference const& xDrawPages, uno::Reference const& xRootNode, uno::Sequence const& rProperties ) override; virtual void SAL_CALL registerUserPaintPolygons( const css::uno::Reference< css::lang::XMultiServiceFactory >& xDocFactory ) override; virtual sal_Bool SAL_CALL setProperty( beans::PropertyValue const& rProperty ) override; virtual sal_Bool SAL_CALL addView( uno::Reference const& xView ) override; virtual sal_Bool SAL_CALL removeView( uno::Reference const& xView ) override; virtual sal_Bool SAL_CALL update( double & nNextTimeout ) override; virtual void SAL_CALL addSlideShowListener( uno::Reference const& xListener ) override; virtual void SAL_CALL removeSlideShowListener( uno::Reference const& xListener ) override; virtual void SAL_CALL addShapeEventListener( uno::Reference const& xListener, uno::Reference const& xShape ) override; virtual void SAL_CALL removeShapeEventListener( uno::Reference const& xListener, uno::Reference const& xShape ) override; virtual void SAL_CALL setShapeCursor( uno::Reference const& xShape, sal_Int16 nPointerShape ) override; // CursorManager virtual bool requestCursor( sal_Int16 nCursorShape ) override; virtual void resetCursor() override; /** This is somewhat similar to displaySlide when called for the current slide. It has been simplified to take advantage of that no slide change takes place. Furthermore it does not show the slide transition. */ void redisplayCurrentSlide(); protected: // WeakComponentImplHelperBase virtual void SAL_CALL disposing() override; bool isDisposed() const { return (rBHelper.bDisposed || rBHelper.bInDispose); } private: struct SeparateListenerImpl; friend struct SeparateListenerImpl; class PrefetchPropertiesFunc; friend class PrefetchPropertiesFunc; /// Stop currently running show. void stopShow(); ///Find a polygons vector in maPolygons (map) PolygonMap::iterator findPolygons( uno::Reference const& xDrawPage); /// Creates a new slide. SlideSharedPtr makeSlide( uno::Reference const& xDrawPage, uno::Reference const& xDrawPages, uno::Reference const& xRootNode ); /// Checks whether the given slide/animation node matches mpPrefetchSlide static bool matches( SlideSharedPtr const& pSlide, uno::Reference const& xSlide, uno::Reference const& xNode ) { if (pSlide) return (pSlide->getXDrawPage() == xSlide && pSlide->getXAnimationNode() == xNode); else return (!xSlide.is() && !xNode.is()); } /// Resets the current slide transition sound object with a new one: SoundPlayerSharedPtr resetSlideTransitionSound( uno::Any const& url, bool bLoopSound ); /// stops the current slide transition sound void stopSlideTransitionSound(); /** Prepare a slide transition This method registers all necessary events and activities for a slide transition. @return the slide change activity, or NULL for no transition effect */ ActivitySharedPtr createSlideTransition( const uno::Reference< drawing::XDrawPage >& xDrawPage, const SlideSharedPtr& rLeavingSlide, const SlideSharedPtr& rEnteringSlide, const EventSharedPtr& rTransitionEndEvent ); /** Request/release the wait symbol. The wait symbol is displayed when there are more requests then releases. Locking the wait symbol helps to avoid intermediate repaints. Do not call this method directly. Use WaitSymbolLock instead. */ void requestWaitSymbol(); void releaseWaitSymbol(); class WaitSymbolLock {public: explicit WaitSymbolLock(SlideShowImpl& rSlideShowImpl) : mrSlideShowImpl(rSlideShowImpl) { mrSlideShowImpl.requestWaitSymbol(); } ~WaitSymbolLock() { mrSlideShowImpl.releaseWaitSymbol(); } private: SlideShowImpl& mrSlideShowImpl; }; /// Filter requested cursor shape against hard slideshow cursors (wait, etc.) sal_Int16 calcActiveCursor( sal_Int16 nCursorShape ) const; /** This method is called asynchronously to finish the rewinding of an effect to the previous slide that was initiated earlier. */ void rewindEffectToPreviousSlide(); /// all registered views UnoViewContainer maViewContainer; /// all registered slide show listeners comphelper::OInterfaceContainerHelper2 maListenerContainer; /// map of vectors, containing all registered listeners for a shape ShapeEventListenerMap maShapeEventListeners; /// map of sal_Int16 values, specifying the mouse cursor for every shape ShapeCursorMap maShapeCursors; //map of vector of Polygons, containing polygons drawn on each slide. PolygonMap maPolygons; boost::optional maUserPaintColor; double maUserPaintStrokeWidth; //changed for the eraser project boost::optional maEraseAllInk; boost::optional maEraseInk; //end changed std::shared_ptr mpPresTimer; ScreenUpdater maScreenUpdater; EventQueue maEventQueue; EventMultiplexer maEventMultiplexer; ActivitiesQueue maActivitiesQueue; UserEventQueue maUserEventQueue; SubsettableShapeManagerSharedPtr mpDummyPtr; std::shared_ptr mpListener; std::shared_ptr mpRehearseTimingsActivity; std::shared_ptr mpWaitSymbol; std::shared_ptr mpPointerSymbol; /// the current slide transition sound object: SoundPlayerSharedPtr mpCurrentSlideTransitionSound; uno::Reference mxComponentContext; uno::Reference< presentation::XTransitionFactory> mxOptionalTransitionFactory; /// the previously running slide SlideSharedPtr mpPreviousSlide; /// the currently running slide SlideSharedPtr mpCurrentSlide; /// the already prefetched slide: best candidate for upcoming slide SlideSharedPtr mpPrefetchSlide; /// slide to be prefetched: best candidate for upcoming slide uno::Reference mxPrefetchSlide; /// save the XDrawPagesSupplier to retrieve polygons uno::Reference mxDrawPagesSupplier; /// Used by MediaFileManager, for media files with package url. uno::Reference mxSBD; /// slide animation to be prefetched: uno::Reference mxPrefetchAnimationNode; sal_Int16 mnCurrentCursor; sal_Int32 mnWaitSymbolRequestCount; bool mbAutomaticAdvancementMode; bool mbImageAnimationsAllowed; bool mbNoSlideTransitions; bool mbMouseVisible; bool mbForceManualAdvance; bool mbShowPaused; bool mbSlideShowIdle; bool mbDisableAnimationZOrder; EffectRewinder maEffectRewinder; FrameSynchronization maFrameSynchronization; }; /** Separate event listener for animation, view and hyperlink events. This handler is registered for slide animation end, view and hyperlink events at the global EventMultiplexer, and forwards notifications to the SlideShowImpl */ struct SlideShowImpl::SeparateListenerImpl : public EventHandler, public ViewRepaintHandler, public HyperlinkHandler, public AnimationEventHandler { SlideShowImpl& mrShow; ScreenUpdater& mrScreenUpdater; EventQueue& mrEventQueue; SeparateListenerImpl( SlideShowImpl& rShow, ScreenUpdater& rScreenUpdater, EventQueue& rEventQueue ) : mrShow( rShow ), mrScreenUpdater( rScreenUpdater ), mrEventQueue( rEventQueue ) {} SeparateListenerImpl( const SeparateListenerImpl& ) = delete; SeparateListenerImpl& operator=( const SeparateListenerImpl& ) = delete; // EventHandler virtual bool handleEvent() override { // DON't call notifySlideAnimationsEnded() // directly, but queue an event. handleEvent() // might be called from e.g. // showNext(), and notifySlideAnimationsEnded() must not be called // in recursion. Note that the event is scheduled for the next // frame so that its expensive execution does not come in between // sprite hiding and shape redraw (at the end of the animation of a // shape), which would cause a flicker. mrEventQueue.addEventForNextRound( makeEvent( [this] () { this->mrShow.notifySlideAnimationsEnded(); }, "SlideShowImpl::notifySlideAnimationsEnded")); return true; } // ViewRepaintHandler virtual void viewClobbered( const UnoViewSharedPtr& rView ) override { // given view needs repaint, request update mrScreenUpdater.notifyUpdate(rView, true); } // HyperlinkHandler virtual bool handleHyperlink( OUString const& rLink ) override { return mrShow.notifyHyperLinkClicked(rLink); } // AnimationEventHandler virtual bool handleAnimationEvent( const AnimationNodeSharedPtr& rNode ) override { return mrShow.handleAnimationEvent(rNode); } }; SlideShowImpl::SlideShowImpl( uno::Reference const& xContext ) : SlideShowImplBase(m_aMutex), maViewContainer(), maListenerContainer( m_aMutex ), maShapeEventListeners(), maShapeCursors(), maUserPaintColor(), maUserPaintStrokeWidth(4.0), mpPresTimer( new canvas::tools::ElapsedTime ), maScreenUpdater(maViewContainer), maEventQueue( mpPresTimer ), maEventMultiplexer( maEventQueue, maViewContainer ), maActivitiesQueue( mpPresTimer ), maUserEventQueue( maEventMultiplexer, maEventQueue, *this ), mpDummyPtr(), mpListener(), mpRehearseTimingsActivity(), mpWaitSymbol(), mpPointerSymbol(), mpCurrentSlideTransitionSound(), mxComponentContext( xContext ), mxOptionalTransitionFactory(), mpCurrentSlide(), mpPrefetchSlide(), mxPrefetchSlide(), mxDrawPagesSupplier(), mxSBD(), mxPrefetchAnimationNode(), mnCurrentCursor(awt::SystemPointer::ARROW), mnWaitSymbolRequestCount(0), mbAutomaticAdvancementMode(false), mbImageAnimationsAllowed( true ), mbNoSlideTransitions( false ), mbMouseVisible( true ), mbForceManualAdvance( false ), mbShowPaused( false ), mbSlideShowIdle( true ), mbDisableAnimationZOrder( false ), maEffectRewinder(maEventMultiplexer, maEventQueue, maUserEventQueue), maFrameSynchronization(1.0 / FrameRate::PreferredFramesPerSecond) { // keep care not constructing any UNO references to this inside ctor, // shift that code to create()! uno::Reference xFactory( mxComponentContext->getServiceManager() ); if( xFactory.is() ) { try { // #i82460# try to retrieve special transition factory mxOptionalTransitionFactory.set( xFactory->createInstanceWithContext( "com.sun.star.presentation.TransitionFactory", mxComponentContext ), uno::UNO_QUERY ); } catch (loader::CannotActivateFactoryException const&) { } } mpListener.reset( new SeparateListenerImpl( *this, maScreenUpdater, maEventQueue )); maEventMultiplexer.addSlideAnimationsEndHandler( mpListener ); maEventMultiplexer.addViewRepaintHandler( mpListener ); maEventMultiplexer.addHyperlinkHandler( mpListener, 0.0 ); maEventMultiplexer.addAnimationStartHandler( mpListener ); maEventMultiplexer.addAnimationEndHandler( mpListener ); } // we are about to be disposed (someone call dispose() on us) void SlideShowImpl::disposing() { osl::MutexGuard const guard( m_aMutex ); maEffectRewinder.dispose(); // stop slide transition sound, if any: stopSlideTransitionSound(); mxComponentContext.clear(); if( mpCurrentSlideTransitionSound ) { mpCurrentSlideTransitionSound->dispose(); mpCurrentSlideTransitionSound.reset(); } mpWaitSymbol.reset(); mpPointerSymbol.reset(); if( mpRehearseTimingsActivity ) { mpRehearseTimingsActivity->dispose(); mpRehearseTimingsActivity.reset(); } if( mpListener ) { maEventMultiplexer.removeSlideAnimationsEndHandler(mpListener); maEventMultiplexer.removeViewRepaintHandler(mpListener); maEventMultiplexer.removeHyperlinkHandler(mpListener); maEventMultiplexer.removeAnimationStartHandler( mpListener ); maEventMultiplexer.removeAnimationEndHandler( mpListener ); mpListener.reset(); } maUserEventQueue.clear(); maActivitiesQueue.clear(); maEventMultiplexer.clear(); maEventQueue.clear(); mpPresTimer.reset(); maShapeCursors.clear(); maShapeEventListeners.clear(); // send all listeners a disposing() that we are going down: maListenerContainer.disposeAndClear( lang::EventObject( static_cast(this) ) ); maViewContainer.dispose(); // release slides: mxPrefetchAnimationNode.clear(); mxPrefetchSlide.clear(); mpPrefetchSlide.reset(); mpCurrentSlide.reset(); mpPreviousSlide.reset(); } /// stops the current slide transition sound void SlideShowImpl::stopSlideTransitionSound() { if (mpCurrentSlideTransitionSound) { mpCurrentSlideTransitionSound->stopPlayback(); mpCurrentSlideTransitionSound->dispose(); mpCurrentSlideTransitionSound.reset(); } } SoundPlayerSharedPtr SlideShowImpl::resetSlideTransitionSound( const uno::Any& rSound, bool bLoopSound ) { bool bStopSound = false; OUString url; if( !(rSound >>= bStopSound) ) bStopSound = false; rSound >>= url; if( !bStopSound && url.isEmpty() ) return SoundPlayerSharedPtr(); stopSlideTransitionSound(); if (!url.isEmpty()) { try { mpCurrentSlideTransitionSound = SoundPlayer::create( maEventMultiplexer, url, mxComponentContext, *this); mpCurrentSlideTransitionSound->setPlaybackLoop( bLoopSound ); } catch (lang::NoSupportException const&) { // catch possible exceptions from SoundPlayer, since // being not able to playback the sound is not a hard // error here (still, the slide transition should be // shown). } } return mpCurrentSlideTransitionSound; } ActivitySharedPtr SlideShowImpl::createSlideTransition( const uno::Reference< drawing::XDrawPage >& xDrawPage, const SlideSharedPtr& rLeavingSlide, const SlideSharedPtr& rEnteringSlide, const EventSharedPtr& rTransitionEndEvent) { ENSURE_OR_THROW( !maViewContainer.empty(), "createSlideTransition(): No views" ); ENSURE_OR_THROW( rEnteringSlide, "createSlideTransition(): No entering slide" ); // return empty transition, if slide transitions // are disabled. if (mbNoSlideTransitions) return ActivitySharedPtr(); // retrieve slide change parameters from XDrawPage uno::Reference< beans::XPropertySet > xPropSet( xDrawPage, uno::UNO_QUERY ); if( !xPropSet.is() ) { SAL_INFO("slideshow", "createSlideTransition(): " "Slide has no PropertySet - assuming no transition" ); return ActivitySharedPtr(); } sal_Int16 nTransitionType(0); if( !getPropertyValue( nTransitionType, xPropSet, "TransitionType") ) { SAL_INFO("slideshow", "createSlideTransition(): " "Could not extract slide transition type from XDrawPage - assuming no transition" ); return ActivitySharedPtr(); } sal_Int16 nTransitionSubType(0); if( !getPropertyValue( nTransitionSubType, xPropSet, "TransitionSubtype") ) { SAL_INFO("slideshow", "createSlideTransition(): " "Could not extract slide transition subtype from XDrawPage - assuming no transition" ); return ActivitySharedPtr(); } bool bTransitionDirection(false); if( !getPropertyValue( bTransitionDirection, xPropSet, "TransitionDirection") ) { SAL_INFO("slideshow", "createSlideTransition(): " "Could not extract slide transition direction from XDrawPage - assuming default direction" ); } sal_Int32 aUnoColor(0); if( !getPropertyValue( aUnoColor, xPropSet, "TransitionFadeColor") ) { SAL_INFO("slideshow", "createSlideTransition(): " "Could not extract slide transition fade color from XDrawPage - assuming black" ); } const RGBColor aTransitionFadeColor( unoColor2RGBColor( aUnoColor )); uno::Any aSound; bool bLoopSound = false; if( !getPropertyValue( aSound, xPropSet, "Sound") ) SAL_INFO("slideshow", "createSlideTransition(): Could not determine transition sound effect URL from XDrawPage - using no sound" ); if( !getPropertyValue( bLoopSound, xPropSet, "LoopSound" ) ) SAL_INFO("slideshow", "createSlideTransition(): Could not get slide property 'LoopSound' - using no sound" ); NumberAnimationSharedPtr pTransition( TransitionFactory::createSlideTransition( rLeavingSlide, rEnteringSlide, maViewContainer, maScreenUpdater, maEventMultiplexer, mxOptionalTransitionFactory, nTransitionType, nTransitionSubType, bTransitionDirection, aTransitionFadeColor, resetSlideTransitionSound( aSound, bLoopSound ) )); if( !pTransition ) return ActivitySharedPtr(); // no transition effect has been // generated. Normally, that means // that simply no transition is // set on this slide. double nTransitionDuration(0.0); if( !getPropertyValue( nTransitionDuration, xPropSet, "TransitionDuration") ) { SAL_INFO("slideshow", "createSlideTransition(): " "Could not extract slide transition duration from XDrawPage - assuming no transition" ); return ActivitySharedPtr(); } sal_Int32 nMinFrames(5); if( !getPropertyValue( nMinFrames, xPropSet, "MinimalFrameNumber") ) { SAL_INFO("slideshow", "createSlideTransition(): " "No minimal number of frames given - assuming 5" ); } // prefetch slide transition bitmaps, but postpone it after // displaySlide() has finished - sometimes, view size has not yet // reached final size maEventQueue.addEvent( makeEvent( [pTransition] () { pTransition->prefetch(); }, "Animation::prefetch")); return ActivitySharedPtr( ActivitiesFactory::createSimpleActivity( ActivitiesFactory::CommonParameters( rTransitionEndEvent, maEventQueue, maActivitiesQueue, nTransitionDuration, nMinFrames, false, boost::optional(1.0), 0.0, 0.0, ShapeSharedPtr(), basegfx::B2DSize( rEnteringSlide->getSlideSize() ) ), pTransition, true )); } PolygonMap::iterator SlideShowImpl::findPolygons( uno::Reference const& xDrawPage) { // TODO(P2): optimize research in the map. return maPolygons.find(xDrawPage); } SlideSharedPtr SlideShowImpl::makeSlide( uno::Reference const& xDrawPage, uno::Reference const& xDrawPages, uno::Reference const& xRootNode ) { if( !xDrawPage.is() ) return SlideSharedPtr(); //Retrieve polygons for the current slide PolygonMap::iterator aIter = findPolygons(xDrawPage); const SlideSharedPtr pSlide( createSlide(xDrawPage, xDrawPages, xRootNode, maEventQueue, maEventMultiplexer, maScreenUpdater, maActivitiesQueue, maUserEventQueue, *this, *this, maViewContainer, mxComponentContext, maShapeEventListeners, maShapeCursors, (aIter != maPolygons.end()) ? aIter->second : PolyPolygonVector(), maUserPaintColor ? *maUserPaintColor : RGBColor(), maUserPaintStrokeWidth, !!maUserPaintColor, mbImageAnimationsAllowed, mbDisableAnimationZOrder) ); // prefetch show content (reducing latency for slide // bitmap and effect start later on) pSlide->prefetch(); return pSlide; } void SlideShowImpl::requestWaitSymbol() { ++mnWaitSymbolRequestCount; OSL_ASSERT(mnWaitSymbolRequestCount>0); if (mnWaitSymbolRequestCount == 1) { if( !mpWaitSymbol ) { // fall back to cursor requestCursor(calcActiveCursor(mnCurrentCursor)); } else mpWaitSymbol->show(); } } void SlideShowImpl::releaseWaitSymbol() { --mnWaitSymbolRequestCount; OSL_ASSERT(mnWaitSymbolRequestCount>=0); if (mnWaitSymbolRequestCount == 0) { if( !mpWaitSymbol ) { // fall back to cursor requestCursor(calcActiveCursor(mnCurrentCursor)); } else mpWaitSymbol->hide(); } } sal_Int16 SlideShowImpl::calcActiveCursor( sal_Int16 nCursorShape ) const { if( mnWaitSymbolRequestCount>0 && !mpWaitSymbol ) // enforce wait cursor nCursorShape = awt::SystemPointer::WAIT; else if( !mbMouseVisible ) // enforce INVISIBLE nCursorShape = awt::SystemPointer::INVISIBLE; else if( maUserPaintColor && nCursorShape == awt::SystemPointer::ARROW ) nCursorShape = awt::SystemPointer::PEN; return nCursorShape; } void SlideShowImpl::stopShow() { // Force-end running animation // =========================== if (mpCurrentSlide) { mpCurrentSlide->hide(); //Register polygons in the map if(findPolygons(mpCurrentSlide->getXDrawPage()) != maPolygons.end()) maPolygons.erase(mpCurrentSlide->getXDrawPage()); maPolygons.insert(make_pair(mpCurrentSlide->getXDrawPage(),mpCurrentSlide->getPolygons())); } // clear all queues maEventQueue.clear(); maActivitiesQueue.clear(); // Attention: we MUST clear the user event queue here, // this is because the current slide might have registered // shape events (click or enter/leave), which might // otherwise dangle forever in the queue (because of the // shared ptr nature). If someone needs to change this: // somehow unregister those shapes at the user event queue // on notifySlideEnded(). maUserEventQueue.clear(); // re-enable automatic effect advancement // (maEventQueue.clear() above might have killed // maEventMultiplexer's tick events) if (mbAutomaticAdvancementMode) { // toggle automatic mode (enabling just again is // ignored by EventMultiplexer) maEventMultiplexer.setAutomaticMode( false ); maEventMultiplexer.setAutomaticMode( true ); } } class SlideShowImpl::PrefetchPropertiesFunc { public: PrefetchPropertiesFunc( SlideShowImpl * that_, bool& rbSkipAllMainSequenceEffects, bool& rbSkipSlideTransition) : mpSlideShowImpl(that_), mrbSkipAllMainSequenceEffects(rbSkipAllMainSequenceEffects), mrbSkipSlideTransition(rbSkipSlideTransition) {} void operator()( beans::PropertyValue const& rProperty ) const { if (rProperty.Name == "Prefetch" ) { uno::Sequence seq; if ((rProperty.Value >>= seq) && seq.getLength() == 2) { seq[0] >>= mpSlideShowImpl->mxPrefetchSlide; seq[1] >>= mpSlideShowImpl->mxPrefetchAnimationNode; } } else if ( rProperty.Name == "SkipAllMainSequenceEffects" ) { rProperty.Value >>= mrbSkipAllMainSequenceEffects; } else if ( rProperty.Name == "SkipSlideTransition" ) { rProperty.Value >>= mrbSkipSlideTransition; } else { SAL_WARN( "slideshow", rProperty.Name ); } } private: SlideShowImpl *const mpSlideShowImpl; bool& mrbSkipAllMainSequenceEffects; bool& mrbSkipSlideTransition; }; void SlideShowImpl::displaySlide( uno::Reference const& xSlide, uno::Reference const& xDrawPages, uno::Reference const& xRootNode, uno::Sequence const& rProperties ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return; maEffectRewinder.setRootAnimationNode(xRootNode); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); mxDrawPagesSupplier = xDrawPages; mxSBD = uno::Reference(mxDrawPagesSupplier, uno::UNO_QUERY); stopShow(); // MUST call that: results in // maUserEventQueue.clear(). What's more, // stopShow()'s currSlide->hide() call is // now also required, notifySlideEnded() // relies on that // unconditionally. Otherwise, genuine // shape animations (drawing layer and // GIF) will not be stopped. bool bSkipAllMainSequenceEffects (false); bool bSkipSlideTransition (false); std::for_each( rProperties.begin(), rProperties.end(), PrefetchPropertiesFunc(this, bSkipAllMainSequenceEffects, bSkipSlideTransition) ); OSL_ENSURE( !maViewContainer.empty(), "### no views!" ); if (maViewContainer.empty()) return; // this here might take some time { WaitSymbolLock aLock (*this); mpPreviousSlide = mpCurrentSlide; mpCurrentSlide.reset(); if (matches( mpPrefetchSlide, xSlide, xRootNode )) { // prefetched slide matches: mpCurrentSlide = mpPrefetchSlide; } else mpCurrentSlide = makeSlide( xSlide, xDrawPages, xRootNode ); OSL_ASSERT( mpCurrentSlide ); if (mpCurrentSlide) { basegfx::B2DSize oldSlideSize; if( mpPreviousSlide ) oldSlideSize = basegfx::B2DSize( mpPreviousSlide->getSlideSize() ); basegfx::B2DSize const slideSize( mpCurrentSlide->getSlideSize() ); // push new transformation to all views, if size changed if( !mpPreviousSlide || oldSlideSize != slideSize ) { for( const auto& pView : maViewContainer ) pView->setViewSize( slideSize ); // explicitly notify view change here, // because transformation might have changed: // optimization, this->notifyViewChange() would // repaint slide which is not necessary. maEventMultiplexer.notifyViewsChanged(); } // create slide transition, and add proper end event // (which then starts the slide effects // via CURRENT_SLIDE.show()) ActivitySharedPtr pSlideChangeActivity ( createSlideTransition( mpCurrentSlide->getXDrawPage(), mpPreviousSlide, mpCurrentSlide, makeEvent( [this] () { this->notifySlideTransitionEnded(false); }, "SlideShowImpl::notifySlideTransitionEnded"))); if (bSkipSlideTransition) { // The transition activity was created for the side effects // (like sound transitions). Because we want to skip the // actual transition animation we do not need the activity // anymore. pSlideChangeActivity.reset(); } if (pSlideChangeActivity) { // factory generated a slide transition - activate it! maActivitiesQueue.addActivity( pSlideChangeActivity ); } else { // no transition effect on this slide - schedule slide // effect start event right away. maEventQueue.addEvent( makeEvent( [this] () { this->notifySlideTransitionEnded(true); }, "SlideShowImpl::notifySlideTransitionEnded")); } } } // finally maListenerContainer.forEach( [](uno::Reference const& xListener) { xListener->slideTransitionStarted(); }); // We are currently rewinding an effect. This lead us from the next // slide to this one. To complete this we have to play back all main // sequence effects on this slide. if (bSkipAllMainSequenceEffects) maEffectRewinder.skipAllMainSequenceEffects(); } void SlideShowImpl::redisplayCurrentSlide() { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); stopShow(); OSL_ENSURE( !maViewContainer.empty(), "### no views!" ); if (maViewContainer.empty()) return; // No transition effect on this slide - schedule slide // effect start event right away. maEventQueue.addEvent( makeEvent( [this] () { this->notifySlideTransitionEnded(true); }, "SlideShowImpl::notifySlideTransitionEnded")); maListenerContainer.forEach( [](uno::Reference const& xListener) { xListener->slideTransitionStarted(); }); } sal_Bool SlideShowImpl::nextEffect() { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); if (mbShowPaused) return true; else return maEventMultiplexer.notifyNextEffect(); } sal_Bool SlideShowImpl::previousEffect() { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); if (mbShowPaused) return true; else { return maEffectRewinder.rewind( maScreenUpdater.createLock(), [this]() { return this->redisplayCurrentSlide(); }, [this]() { return this->rewindEffectToPreviousSlide(); } ); } } void SlideShowImpl::rewindEffectToPreviousSlide() { // Show the wait symbol now and prevent it from showing temporary slide // content while effects are played back. WaitSymbolLock aLock (*this); // A previous call to EffectRewinder::Rewind could not rewind the current // effect because there are no effects on the current slide or none has // yet been displayed. Go to the previous slide. notifySlideEnded(true); // Process pending events once more in order to have the following // screen update show the last effect. Not sure whether this should be // necessary. maEventQueue.forceEmpty(); // We have to call the screen updater before the wait symbol is turned // off. Otherwise the wait symbol would force the display of an // intermediate state of the slide (before the effects are replayed.) maScreenUpdater.commitUpdates(); } sal_Bool SlideShowImpl::startShapeActivity( uno::Reference const& /*xShape*/ ) { osl::MutexGuard const guard( m_aMutex ); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); // TODO(F3): NYI OSL_FAIL( "not yet implemented!" ); return false; } sal_Bool SlideShowImpl::stopShapeActivity( uno::Reference const& /*xShape*/ ) { osl::MutexGuard const guard( m_aMutex ); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); // TODO(F3): NYI OSL_FAIL( "not yet implemented!" ); return false; } sal_Bool SlideShowImpl::pause( sal_Bool bPauseShow ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); if (bPauseShow) mpPresTimer->pauseTimer(); else mpPresTimer->continueTimer(); maEventMultiplexer.notifyPauseMode(bPauseShow); mbShowPaused = bPauseShow; return true; } uno::Reference SlideShowImpl::getCurrentSlide() { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return uno::Reference(); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); if (mpCurrentSlide) return mpCurrentSlide->getXDrawPage(); else return uno::Reference(); } sal_Bool SlideShowImpl::addView( uno::Reference const& xView ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); // first of all, check if view has a valid canvas ENSURE_OR_RETURN_FALSE( xView.is(), "addView(): Invalid view" ); ENSURE_OR_RETURN_FALSE( xView->getCanvas().is(), "addView(): View does not provide a valid canvas" ); UnoViewSharedPtr const pView( createSlideView( xView, maEventQueue, maEventMultiplexer )); if (!maViewContainer.addView( pView )) return false; // view already added // initialize view content // ======================= if (mpCurrentSlide) { // set view transformation const basegfx::B2ISize slideSize = mpCurrentSlide->getSlideSize(); pView->setViewSize( basegfx::B2DSize( slideSize.getX(), slideSize.getY() ) ); } // clear view area (since it's newly added, // we need a clean slate) pView->clearAll(); // broadcast newly added view maEventMultiplexer.notifyViewAdded( pView ); // set current mouse ptr pView->setCursorShape( calcActiveCursor(mnCurrentCursor) ); return true; } sal_Bool SlideShowImpl::removeView( uno::Reference const& xView ) { osl::MutexGuard const guard( m_aMutex ); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); ENSURE_OR_RETURN_FALSE( xView.is(), "removeView(): Invalid view" ); UnoViewSharedPtr const pView( maViewContainer.removeView( xView ) ); if( !pView ) return false; // view was not added in the first place // remove view from EventMultiplexer (mouse events etc.) maEventMultiplexer.notifyViewRemoved( pView ); pView->_dispose(); return true; } void SlideShowImpl::registerUserPaintPolygons( const uno::Reference< lang::XMultiServiceFactory >& xDocFactory ) { //Retrieve Polygons if user ends presentation by context menu if (mpCurrentSlide) { if(findPolygons(mpCurrentSlide->getXDrawPage()) != maPolygons.end()) maPolygons.erase(mpCurrentSlide->getXDrawPage()); maPolygons.insert(make_pair(mpCurrentSlide->getXDrawPage(),mpCurrentSlide->getPolygons())); } //Creating the layer for shapes // query for the XLayerManager uno::Reference< drawing::XLayerSupplier > xLayerSupplier(xDocFactory, uno::UNO_QUERY); uno::Reference< container::XNameAccess > xNameAccess = xLayerSupplier->getLayerManager(); uno::Reference< drawing::XLayerManager > xLayerManager(xNameAccess, uno::UNO_QUERY); // create a layer and set its properties uno::Reference< drawing::XLayer > xDrawnInSlideshow = xLayerManager->insertNewByIndex(xLayerManager->getCount()); //Layer Name which enables to catch annotations OUString layerName = "DrawnInSlideshow"; uno::Any aPropLayer; aPropLayer <<= layerName; xDrawnInSlideshow->setPropertyValue("Name", aPropLayer); aPropLayer <<= true; xDrawnInSlideshow->setPropertyValue("IsVisible", aPropLayer); aPropLayer <<= false; xDrawnInSlideshow->setPropertyValue("IsLocked", aPropLayer); //Register polygons for each slide for( const auto& rPoly : maPolygons ) { PolyPolygonVector aPolygons = rPoly.second; //Get shapes for the slide css::uno::Reference< css::drawing::XShapes > Shapes(rPoly.first, css::uno::UNO_QUERY); //Retrieve polygons for one slide for( const auto& pPolyPoly : aPolygons ) { ::basegfx::B2DPolyPolygon b2DPolyPoly = ::basegfx::unotools::b2DPolyPolygonFromXPolyPolygon2D(pPolyPoly->getUNOPolyPolygon()); //Normally there is only one polygon for(sal_uInt32 i=0; i< b2DPolyPoly.count();i++) { const ::basegfx::B2DPolygon& aPoly = b2DPolyPoly.getB2DPolygon(i); sal_uInt32 nPoints = aPoly.count(); if( nPoints > 1) { //create the PolyLineShape uno::Reference< uno::XInterface > polyshape(xDocFactory->createInstance( "com.sun.star.drawing.PolyLineShape" ) ); uno::Reference< drawing::XShape > rPolyShape(polyshape, uno::UNO_QUERY); //Add the shape to the slide Shapes->add(rPolyShape); //Retrieve shape properties uno::Reference< beans::XPropertySet > aXPropSet( rPolyShape, uno::UNO_QUERY ); //Construct a sequence of points sequence drawing::PointSequenceSequence aRetval; //Create only one sequence for one polygon aRetval.realloc( 1 ); // Retrieve the sequence of points from aRetval drawing::PointSequence* pOuterSequence = aRetval.getArray(); // Create 2 points in this sequence pOuterSequence->realloc(nPoints); // Get these points which are in an array awt::Point* pInnerSequence = pOuterSequence->getArray(); for( sal_uInt32 n = 0; n < nPoints; n++ ) { //Create a point from the polygon *pInnerSequence++ = awt::Point( basegfx::fround(aPoly.getB2DPoint(n).getX()), basegfx::fround(aPoly.getB2DPoint(n).getY())); } //Fill the properties //Give the built PointSequenceSequence. uno::Any aParam; aParam <<= aRetval; aXPropSet->setPropertyValue("PolyPolygon", aParam ); //LineStyle : SOLID by default drawing::LineStyle eLS; eLS = drawing::LineStyle_SOLID; aXPropSet->setPropertyValue("LineStyle", uno::Any(eLS) ); //LineColor sal_uInt32 nLineColor; nLineColor = pPolyPoly->getRGBALineColor(); //Transform polygon color from RRGGBBAA to AARRGGBB aXPropSet->setPropertyValue("LineColor", uno::Any(RGBAColor2UnoColor(nLineColor)) ); //LineWidth double fLineWidth; fLineWidth = pPolyPoly->getStrokeWidth(); aXPropSet->setPropertyValue("LineWidth", uno::Any(static_cast(fLineWidth)) ); // make polygons special xLayerManager->attachShapeToLayer(rPolyShape, xDrawnInSlideshow); } } } } } sal_Bool SlideShowImpl::setProperty( beans::PropertyValue const& rProperty ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); if ( rProperty.Name == "AutomaticAdvancement" ) { double nTimeout(0.0); mbAutomaticAdvancementMode = (rProperty.Value >>= nTimeout); if (mbAutomaticAdvancementMode) { maEventMultiplexer.setAutomaticTimeout( nTimeout ); } maEventMultiplexer.setAutomaticMode( mbAutomaticAdvancementMode ); return true; } if ( rProperty.Name == "UserPaintColor" ) { sal_Int32 nColor(0); if (rProperty.Value >>= nColor) { OSL_ENSURE( mbMouseVisible, "setProperty(): User paint overrides invisible mouse" ); // enable user paint maUserPaintColor = unoColor2RGBColor(nColor); if( mpCurrentSlide && !mpCurrentSlide->isPaintOverlayActive() ) mpCurrentSlide->enablePaintOverlay(); maEventMultiplexer.notifyUserPaintColor( *maUserPaintColor ); } else { // disable user paint maUserPaintColor.reset(); maEventMultiplexer.notifyUserPaintDisabled(); } resetCursor(); return true; } //adding support for erasing features in UserPaintOverlay if ( rProperty.Name == "EraseAllInk" ) { bool bEraseAllInk(false); if (rProperty.Value >>= bEraseAllInk) { OSL_ENSURE( mbMouseVisible, "setProperty(): User paint overrides invisible mouse" ); // enable user paint maEraseAllInk = bEraseAllInk; maEventMultiplexer.notifyEraseAllInk( *maEraseAllInk ); } return true; } if ( rProperty.Name == "SwitchPenMode" ) { bool bSwitchPenMode(false); if (rProperty.Value >>= bSwitchPenMode) { OSL_ENSURE( mbMouseVisible, "setProperty(): User paint overrides invisible mouse" ); if(bSwitchPenMode){ // Switch to Pen Mode maEventMultiplexer.notifySwitchPenMode(); } } return true; } if ( rProperty.Name == "SwitchEraserMode" ) { bool bSwitchEraserMode(false); if (rProperty.Value >>= bSwitchEraserMode) { OSL_ENSURE( mbMouseVisible, "setProperty(): User paint overrides invisible mouse" ); if(bSwitchEraserMode){ // switch to Eraser mode maEventMultiplexer.notifySwitchEraserMode(); } } return true; } if ( rProperty.Name == "EraseInk" ) { sal_Int32 nEraseInk(100); if (rProperty.Value >>= nEraseInk) { OSL_ENSURE( mbMouseVisible, "setProperty(): User paint overrides invisible mouse" ); // enable user paint maEraseInk = nEraseInk; maEventMultiplexer.notifyEraseInkWidth( *maEraseInk ); } return true; } // new Property for pen's width if ( rProperty.Name == "UserPaintStrokeWidth" ) { double nWidth(4.0); if (rProperty.Value >>= nWidth) { OSL_ENSURE( mbMouseVisible,"setProperty(): User paint overrides invisible mouse" ); // enable user paint stroke width maUserPaintStrokeWidth = nWidth; maEventMultiplexer.notifyUserPaintStrokeWidth( maUserPaintStrokeWidth ); } return true; } if ( rProperty.Name == "AdvanceOnClick" ) { bool bAdvanceOnClick = false; if (! (rProperty.Value >>= bAdvanceOnClick)) return false; maUserEventQueue.setAdvanceOnClick( bAdvanceOnClick ); return true; } if ( rProperty.Name == "DisableAnimationZOrder" ) { bool bDisableAnimationZOrder = false; if (! (rProperty.Value >>= bDisableAnimationZOrder)) return false; mbDisableAnimationZOrder = bDisableAnimationZOrder; return true; } if ( rProperty.Name == "ImageAnimationsAllowed" ) { if (! (rProperty.Value >>= mbImageAnimationsAllowed)) return false; // TODO(F3): Forward to slides! return true; } if ( rProperty.Name == "MouseVisible" ) { if (! (rProperty.Value >>= mbMouseVisible)) return false; requestCursor(mnCurrentCursor); return true; } if ( rProperty.Name == "ForceManualAdvance" ) { return (rProperty.Value >>= mbForceManualAdvance); } if ( rProperty.Name == "RehearseTimings" ) { bool bRehearseTimings = false; if (! (rProperty.Value >>= bRehearseTimings)) return false; if (bRehearseTimings) { // TODO(Q3): Move to slide mpRehearseTimingsActivity = RehearseTimingsActivity::create( SlideShowContext( mpDummyPtr, maEventQueue, maEventMultiplexer, maScreenUpdater, maActivitiesQueue, maUserEventQueue, *this, *this, maViewContainer, mxComponentContext) ); } else if (mpRehearseTimingsActivity) { // removes timer from all views: mpRehearseTimingsActivity->dispose(); mpRehearseTimingsActivity.reset(); } return true; } if ( rProperty.Name == "WaitSymbolBitmap" ) { uno::Reference xBitmap; if (! (rProperty.Value >>= xBitmap)) return false; mpWaitSymbol = WaitSymbol::create( xBitmap, maScreenUpdater, maEventMultiplexer, maViewContainer ); return true; } if ( rProperty.Name == "PointerSymbolBitmap" ) { uno::Reference xBitmap; if (! (rProperty.Value >>= xBitmap)) return false; mpPointerSymbol = PointerSymbol::create( xBitmap, maScreenUpdater, maEventMultiplexer, maViewContainer ); return true; } if ( rProperty.Name == "PointerVisible" ) { bool visible; if (!(rProperty.Value >>= visible)) return false; mpPointerSymbol->setVisible(visible); return true; } if ( rProperty.Name == "PointerPosition") { css::geometry::RealPoint2D pos; if (! (rProperty.Value >>= pos)) return false; mpPointerSymbol->viewsChanged(pos); return true; } if (rProperty.Name == "NoSlideTransitions" ) { return (rProperty.Value >>= mbNoSlideTransitions); } if ( rProperty.Name == "IsSoundEnabled" ) { uno::Sequence aValues; uno::Reference xView; bool bValue (false); if ((rProperty.Value >>= aValues) && aValues.getLength()==2 && (aValues[0] >>= xView) && (aValues[1] >>= bValue)) { // Look up the view. auto iView = std::find_if(maViewContainer.begin(), maViewContainer.end(), [&xView](const UnoViewSharedPtr& rxView) { return rxView && rxView->getUnoView() == xView; }); if (iView != maViewContainer.end()) { // Store the flag at the view so that media shapes have // access to it. (*iView)->setIsSoundEnabled(bValue); return true; } } } return false; } void SlideShowImpl::addSlideShowListener( uno::Reference const& xListener ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return; // container syncs with passed mutex ref maListenerContainer.addInterface(xListener); } void SlideShowImpl::removeSlideShowListener( uno::Reference const& xListener ) { osl::MutexGuard const guard( m_aMutex ); // container syncs with passed mutex ref maListenerContainer.removeInterface(xListener); } void SlideShowImpl::addShapeEventListener( uno::Reference const& xListener, uno::Reference const& xShape ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); ShapeEventListenerMap::iterator aIter; if( (aIter=maShapeEventListeners.find( xShape )) == maShapeEventListeners.end() ) { // no entry for this shape -> create one aIter = maShapeEventListeners.emplace( xShape, std::make_shared( m_aMutex)).first; } // add new listener to broadcaster if( aIter->second.get() ) aIter->second->addInterface( xListener ); maEventMultiplexer.notifyShapeListenerAdded(xShape); } void SlideShowImpl::removeShapeEventListener( uno::Reference const& xListener, uno::Reference const& xShape ) { osl::MutexGuard const guard( m_aMutex ); // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); ShapeEventListenerMap::iterator aIter; if( (aIter = maShapeEventListeners.find( xShape )) != maShapeEventListeners.end() ) { // entry for this shape found -> remove listener from // helper object ENSURE_OR_THROW( aIter->second.get(), "SlideShowImpl::removeShapeEventListener(): " "listener map contains NULL broadcast helper" ); aIter->second->removeInterface( xListener ); } maEventMultiplexer.notifyShapeListenerRemoved(xShape); } void SlideShowImpl::setShapeCursor( uno::Reference const& xShape, sal_Int16 nPointerShape ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return; // precondition: must only be called from the main thread! DBG_TESTSOLARMUTEX(); ShapeCursorMap::iterator aIter; if( (aIter=maShapeCursors.find( xShape )) == maShapeCursors.end() ) { // no entry for this shape -> create one if( nPointerShape != awt::SystemPointer::ARROW ) { // add new entry, unless shape shall display // normal pointer arrow -> no need to handle that // case maShapeCursors.emplace(xShape, nPointerShape); } } else if( nPointerShape == awt::SystemPointer::ARROW ) { // shape shall display normal cursor -> can disable // the cursor and clear the entry maShapeCursors.erase( xShape ); } else { // existing entry found, update with new cursor ID aIter->second = nPointerShape; } } bool SlideShowImpl::requestCursor( sal_Int16 nCursorShape ) { mnCurrentCursor = nCursorShape; const sal_Int16 nActualCursor = calcActiveCursor(mnCurrentCursor); // change all views to the requested cursor ID for( const auto& pView : maViewContainer ) pView->setCursorShape( nActualCursor ); return nActualCursor==nCursorShape; } void SlideShowImpl::resetCursor() { mnCurrentCursor = awt::SystemPointer::ARROW; const sal_Int16 nActualCursor = calcActiveCursor( mnCurrentCursor ); // change all views to the default cursor ID for( const auto& pView : maViewContainer ) pView->setCursorShape( nActualCursor ); } sal_Bool SlideShowImpl::update( double & nNextTimeout ) { osl::MutexGuard const guard( m_aMutex ); if (isDisposed()) return false; // precondition: update() must only be called from the // main thread! DBG_TESTSOLARMUTEX(); if( mbShowPaused ) { // commit frame (might be repaints pending) maScreenUpdater.commitUpdates(); return false; } else { // TODO(F2): re-evaluate whether that timer lagging makes // sense. // hold timer, while processing the queues: // 1. when there is more than one active activity this ensures the // same time for all activities and events // 2. processing of events may lead to creation of further events // that have zero delay. While the timer is stopped these events // are processed in the same run. { //Get a shared-ptr that outlives the scope-guard which will //ensure that the pointed-to-item exists in the case of a //::dispose clearing mpPresTimer std::shared_ptr xTimer(mpPresTimer); comphelper::ScopeGuard scopeGuard( [&xTimer]() { return xTimer->releaseTimer(); } ); xTimer->holdTimer(); // process queues maEventQueue.process(); // #i118671# the call above may execute a macro bound to an object. In // that case this macro may have destroyed this local slideshow so that it // is disposed (see bugdoc at task). In that case, detect this and exit // gently from this slideshow. Do not forget to disable the scoped // call to mpPresTimer, this will be deleted if we are disposed. if (isDisposed()) { scopeGuard.dismiss(); return false; } maActivitiesQueue.process(); // commit frame to screen maFrameSynchronization.Synchronize(); maScreenUpdater.commitUpdates(); // TODO(Q3): remove need to call dequeued() from // activities. feels like a wart. // Rationale for ActivitiesQueue::processDequeued(): when // an activity ends, it usually pushed the end state to // the animated shape in question, and ends the animation // (which, in turn, will usually disable shape sprite // mode). Disabling shape sprite mode causes shape // repaint, which, depending on slide content, takes // considerably more time than sprite updates. Thus, the // last animation step tends to look delayed. To // camouflage this, reaching end position and disabling // sprite mode is split into two (normal Activity::end(), // and Activity::dequeued()). Now, the reason to call // commitUpdates() twice here is caused by the unrelated // fact that during wait cursor display/hide, the screen // is updated, and shows hidden sprites, but, in case of // leaving the second commitUpdates() call out and punting // that to the next round, no updated static slide // content. In short, the last shape animation of a slide // tends to blink at its end. // process dequeued activities _after_ commit to screen maActivitiesQueue.processDequeued(); // commit frame to screen maScreenUpdater.commitUpdates(); } // Time held until here const bool bActivitiesLeft = ! maActivitiesQueue.isEmpty(); const bool bTimerEventsLeft = ! maEventQueue.isEmpty(); const bool bRet = (bActivitiesLeft || bTimerEventsLeft); if (bRet) { // calc nNextTimeout value: if (bActivitiesLeft) { // Activity queue is not empty. Tell caller that we would // like to render another frame. // Return a zero time-out to signal our caller to call us // back as soon as possible. The actual timing, waiting the // appropriate amount of time between frames, is then done // by the maFrameSynchronization object. nNextTimeout = 0; maFrameSynchronization.Activate(); } else { // timer events left: // difference from current time (nota bene: // time no longer held here!) to the next event in // the event queue. // #i61190# Retrieve next timeout only _after_ // processing activity queue // ensure positive value: nNextTimeout = std::max( 0.0, maEventQueue.nextTimeout() ); // There is no active animation so the frame rate does not // need to be synchronized. maFrameSynchronization.Deactivate(); } mbSlideShowIdle = false; } #if defined(DBG_UTIL) // when slideshow is idle, issue an XUpdatable::update() call // exactly once after a previous animation sequence finished - // this might trigger screen dumps on some canvas // implementations if( !mbSlideShowIdle && (!bRet || nNextTimeout > 1.0) ) { for( const auto& pView : maViewContainer ) { try { uno::Reference< presentation::XSlideShowView > xView( pView->getUnoView(), uno::UNO_SET_THROW ); uno::Reference const xUpdatable( xView->getCanvas(), uno::UNO_QUERY); if (xUpdatable.is()) // not supported in PresenterCanvas { xUpdatable->update(); } } catch( uno::RuntimeException& ) { throw; } catch( uno::Exception& ) { TOOLS_WARN_EXCEPTION( "slideshow", "" ); } } mbSlideShowIdle = true; } #endif return bRet; } } void SlideShowImpl::notifySlideTransitionEnded( bool bPaintSlide ) { osl::MutexGuard const guard( m_aMutex ); OSL_ENSURE( !isDisposed(), "### already disposed!" ); OSL_ENSURE( mpCurrentSlide, "notifySlideTransitionEnded(): Invalid current slide" ); if (mpCurrentSlide) { mpCurrentSlide->update_settings( !!maUserPaintColor, maUserPaintColor ? *maUserPaintColor : RGBColor(), maUserPaintStrokeWidth ); // first init show, to give the animations // the chance to register SlideStartEvents const bool bBackgroundLayerRendered( !bPaintSlide ); mpCurrentSlide->show( bBackgroundLayerRendered ); maEventMultiplexer.notifySlideStartEvent(); } } void queryAutomaticSlideTransition( uno::Reference const& xDrawPage, double& nAutomaticNextSlideTimeout, bool& bHasAutomaticNextSlide ) { // retrieve slide change parameters from XDrawPage // =============================================== uno::Reference< beans::XPropertySet > xPropSet( xDrawPage, uno::UNO_QUERY ); sal_Int32 nChange(0); if( !xPropSet.is() || !getPropertyValue( nChange, xPropSet, "Change") ) { SAL_INFO("slideshow", "queryAutomaticSlideTransition(): " "Could not extract slide change mode from XDrawPage - assuming " ); } bHasAutomaticNextSlide = nChange == 1; if( !xPropSet.is() || !getPropertyValue( nAutomaticNextSlideTimeout, xPropSet, "HighResDuration") ) { SAL_INFO("slideshow", "queryAutomaticSlideTransition(): " "Could not extract slide transition timeout from " "XDrawPage - assuming 1 sec" ); } } void SlideShowImpl::notifySlideAnimationsEnded() { osl::MutexGuard const guard( m_aMutex ); //Draw polygons above animations mpCurrentSlide->drawPolygons(); OSL_ENSURE( !isDisposed(), "### already disposed!" ); // This struct will receive the (interruptable) event, // that triggers the notifySlideEnded() method. InterruptableEventPair aNotificationEvents; if( maEventMultiplexer.getAutomaticMode() ) { OSL_ENSURE( ! mpRehearseTimingsActivity, "unexpected: RehearseTimings mode!" ); // schedule a slide end event, with automatic mode's // delay aNotificationEvents = makeInterruptableDelay( [this]() { return this->notifySlideEnded( false ); }, maEventMultiplexer.getAutomaticTimeout() ); } else { OSL_ENSURE( mpCurrentSlide, "notifySlideAnimationsEnded(): Invalid current slide!" ); bool bHasAutomaticNextSlide=false; double nAutomaticNextSlideTimeout=0.0; queryAutomaticSlideTransition(mpCurrentSlide->getXDrawPage(), nAutomaticNextSlideTimeout, bHasAutomaticNextSlide); // check whether slide transition should happen // 'automatically'. If yes, simply schedule the // specified timeout. // NOTE: mbForceManualAdvance and mpRehearseTimingsActivity // override any individual slide setting, to always // step slides manually. if( !mbForceManualAdvance && !mpRehearseTimingsActivity && bHasAutomaticNextSlide ) { aNotificationEvents = makeInterruptableDelay( [this]() { return this->notifySlideEnded( false ); }, nAutomaticNextSlideTimeout); // TODO(F2): Provide a mechanism to let the user override // this automatic timeout via next() } else { if (mpRehearseTimingsActivity) mpRehearseTimingsActivity->start(); // generate click event. Thus, the user must // trigger the actual end of a slide. No need to // generate interruptable event here, there's no // timeout involved. aNotificationEvents.mpImmediateEvent = makeEvent( [this] () { this->notifySlideEnded(false); }, "SlideShowImpl::notifySlideEnded"); } } // register events on the queues. To make automatic slide // changes interruptable, register the interruption event // as a nextEffectEvent target. Note that the timeout // event is optional (e.g. manual slide changes don't // generate a timeout) maUserEventQueue.registerNextEffectEvent( aNotificationEvents.mpImmediateEvent ); if( aNotificationEvents.mpTimeoutEvent ) maEventQueue.addEvent( aNotificationEvents.mpTimeoutEvent ); // current slide's main sequence is over. Now should be // the time to prefetch the next slide (if any), and // prepare the initial slide bitmap (speeds up slide // change setup time a lot). Show the wait cursor, this // indeed might take some seconds. { WaitSymbolLock aLock (*this); if (! matches( mpPrefetchSlide, mxPrefetchSlide, mxPrefetchAnimationNode )) { mpPrefetchSlide = makeSlide( mxPrefetchSlide, mxDrawPagesSupplier, mxPrefetchAnimationNode ); } if (mpPrefetchSlide) { // ignore return value, this is just to populate // Slide's internal bitmap buffer, such that the time // needed to generate the slide bitmap is not spent // when the slide change is requested. mpPrefetchSlide->getCurrentSlideBitmap( *maViewContainer.begin() ); } } // finally maListenerContainer.forEach( [](uno::Reference const& xListener) { xListener->slideAnimationsEnded(); }); } void SlideShowImpl::notifySlideEnded (const bool bReverse) { osl::MutexGuard const guard( m_aMutex ); OSL_ENSURE( !isDisposed(), "### already disposed!" ); if (mpRehearseTimingsActivity && !bReverse) { const double time = mpRehearseTimingsActivity->stop(); if (mpRehearseTimingsActivity->hasBeenClicked()) { // save time at current drawpage: uno::Reference xPropSet( mpCurrentSlide->getXDrawPage(), uno::UNO_QUERY ); OSL_ASSERT( xPropSet.is() ); if (xPropSet.is()) { xPropSet->setPropertyValue( "Change", uno::Any( static_cast(1) ) ); xPropSet->setPropertyValue( "Duration", uno::Any( static_cast(time) ) ); } } } if (bReverse) maEventMultiplexer.notifySlideEndEvent(); stopShow(); // MUST call that: results in // maUserEventQueue.clear(). What's more, // stopShow()'s currSlide->hide() call is // now also required, notifySlideEnded() // relies on that // unconditionally. Otherwise, genuine // shape animations (drawing layer and // GIF) will not be stopped. maListenerContainer.forEach( [&bReverse]( const uno::Reference< presentation::XSlideShowListener >& xListener ) { return xListener->slideEnded( bReverse ); } ); } bool SlideShowImpl::notifyHyperLinkClicked( OUString const& hyperLink ) { osl::MutexGuard const guard( m_aMutex ); maListenerContainer.forEach( [&hyperLink]( const uno::Reference< presentation::XSlideShowListener >& xListener ) { return xListener->hyperLinkClicked( hyperLink ); } ); return true; } /** Notification from eventmultiplexer that an animation event has occurred. This will be forwarded to all registered XSlideShoeListener */ bool SlideShowImpl::handleAnimationEvent( const AnimationNodeSharedPtr& rNode ) { osl::MutexGuard const guard( m_aMutex ); uno::Reference xNode( rNode->getXAnimationNode() ); switch( rNode->getState() ) { case AnimationNode::ACTIVE: maListenerContainer.forEach( [&xNode]( const uno::Reference< animations::XAnimationListener >& xListener ) { return xListener->beginEvent( xNode ); } ); break; case AnimationNode::FROZEN: case AnimationNode::ENDED: maListenerContainer.forEach( [&xNode]( const uno::Reference< animations::XAnimationListener >& xListener ) { return xListener->endEvent( xNode ); } ); if(mpCurrentSlide->isPaintOverlayActive()) mpCurrentSlide->drawPolygons(); break; default: break; } return true; } std::shared_ptr SlideShowImpl::getMediaTempFile(const OUString& aUrl) { std::shared_ptr aRet; if (!mxSBD.is()) return aRet; comphelper::LifecycleProxy aProxy; uno::Reference xStream = comphelper::OStorageHelper::GetStreamAtPackageURL(mxSBD->getDocumentStorage(), aUrl, css::embed::ElementModes::READ, aProxy); uno::Reference xInStream = xStream->getInputStream(); if (xInStream.is()) { sal_Int32 nLastDot = aUrl.lastIndexOf('.'); sal_Int32 nLastSlash = aUrl.lastIndexOf('/'); OUString sDesiredExtension; if (nLastDot > nLastSlash && nLastDot+1 < aUrl.getLength()) sDesiredExtension = aUrl.copy(nLastDot); OUString sTempUrl; if (::avmedia::CreateMediaTempFile(xInStream, sTempUrl, sDesiredExtension)) aRet.reset(new avmedia::MediaTempFile(sTempUrl)); xInStream->closeInput(); } return aRet; } //===== FrameSynchronization ================================================== FrameSynchronization::FrameSynchronization (const double nFrameDuration) : maTimer(), mnFrameDuration(nFrameDuration), mnNextFrameTargetTime(0), mbIsActive(false) { MarkCurrentFrame(); } void FrameSynchronization::MarkCurrentFrame() { mnNextFrameTargetTime = maTimer.getElapsedTime() + mnFrameDuration; } void FrameSynchronization::Synchronize() { if (mbIsActive) { // Do busy waiting for now. while (maTimer.getElapsedTime() < mnNextFrameTargetTime) ; } MarkCurrentFrame(); } void FrameSynchronization::Activate() { mbIsActive = true; } void FrameSynchronization::Deactivate() { mbIsActive = false; } } // anon namespace namespace sdecl = comphelper::service_decl; const sdecl::ServiceDecl slideShowDecl( sdecl::class_(), "com.sun.star.comp.presentation.SlideShow", "com.sun.star.presentation.SlideShow" ); // The C shared lib entry points extern "C" SAL_DLLPUBLIC_EXPORT void* slideshow_component_getFactory( sal_Char const* pImplName, void*, void* ) { return sdecl::component_getFactoryHelper( pImplName, {&slideShowDecl} ); } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */