# -*- Mode: makefile-gmake; tab-width: 4; indent-tabs-mode: t -*-
#
# This file is part of the LibreOffice project.
#
# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.
#
# This file incorporates work covered by the following license notice:
#
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed
# with this work for additional information regarding copyright
# ownership. The ASF licenses this file to you under the Apache
# License, Version 2.0 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.apache.org/licenses/LICENSE-2.0 .
#
# PackagePart class
# a pattern rule with multiple targets is actually executed only once for each
# match, so define only pattern rules with one target here
# the .dir is for make 3.81, which ignores trailing /
define gb_PackagePart__rule
$(1)/.dir :
$$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@))
$(1)/%/.dir :
$$(if $$(wildcard $$(dir $$@)),,mkdir -p $$(dir $$@))
$(1)/% :
$$(call gb_Deliver_deliver,$$<,$$@)
endef
$(foreach destination,$(call gb_PackagePart_get_destinations),$(eval \
$(call gb_PackagePart__rule,$(destination))))
# Deliver one file to the output dir.
#
# gb_PackagePart_PackagePart destfile source prep-target outdir
define gb_PackagePart_PackagePart
$(4)/$(1) : $(2) | $(dir $(4)/$(1)).dir
$(2) :| $(3)
$(if $(gb_Package_PRESTAGEDIR),\
$(if $(wildcard $(gb_Package_PRESTAGEDIR)/$(1)),\
$(call gb_Deliver_add_deliverable,$(4)/$(1),$(gb_Package_PRESTAGEDIR)/$(1),$(3)),\
$(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \
),\
$(call gb_Deliver_add_deliverable,$(4)/$(1),$(2),$(3)) \
)
endef
# Package class
$(dir $(call gb_Package_get_target,%)).dir :
$(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
$(dir $(call gb_Package_get_target,%))%/.dir :
$(if $(wildcard $(dir $@)),,mkdir -p $(dir $@))
.PHONY : $(call gb_Package_get_clean_target,%)
$(call gb_Package_get_clean_target,%) :
$(call gb_Output_announce,$*,$(false),PKG,2)
RESPONSEFILE=$(call var2file,$(shell $(gb_MKTEMP)),500,$(FILES)) \
&& cat $${RESPONSEFILE} | xargs $(if $(filter MACOSX,$(OS_FOR_BUILD)),-n 1000) rm -f \
&& rm -f $${RESPONSEFILE}
$(call gb_Package_get_preparation_target,%) :
mkdir -p $(dir $@) && touch $@
# NOTE: It is possible that a file has been added to the package more
# than once, so we must drop the duplicates, or Windows installer will
# be unhappy.
# TODO: this is only for convenience for impl. of gbuild classes. There
# should be check that it does not happen in "normal" use, i.e., in
# Package_foo makefiles.
$(call gb_Package_get_target,%) :
$(call gb_Output_announce,$*,$(true),PKG,2)
$(if $(PACAKGE_DEFINED),,$(call gb_Output_error,Something depends on package $* which does not exist.))
rm -f $@ && \
mv $(call var2file,$@.tmp,100,$(sort $(FILES))) $@
# for other targets that want to create Packages, does not register at Module
define gb_Package_Package_internal
gb_Package_SOURCEDIR_$(1) := $(2)
gb_Package_OUTDIR_$(1) := $(INSTROOT)
$(call gb_Package_get_target,$(1)) : PACAKGE_DEFINED := $(true)
$(call gb_Package_get_target,$(1)) : FILES :=
$(call gb_Package_get_clean_target,$(1)) : FILES := $(call gb_Package_get_target,$(1)) $(call gb_Package_get_preparation_target,$(1))
$(call gb_Package_get_target,$(1)) : $(call gb_Package_get_preparation_target,$(1))
$(call gb_Package_get_target,$(1)) : $(gb_Module_CURRENTMAKEFILE)
$(call gb_Package_get_target,$(1)) :| $(dir $(call gb_Package_get_target,$(1))).dir
endef
define gb_Package_Package
$$(if $$(gb_Package_SOURCEDIR_$(1)),$$(call gb_Output_error,gb_Package__check: Package $(1) has already been defined))
$(if $(filter postprocess% instsetoo_native%,$(1)),,\
$(call gb_Postprocess_register_target,AllPackages,Package,$(1)))
$(call gb_Package_Package_internal,$(1),$(2))
$$(eval $$(call gb_Module_register_target,$(call gb_Package_get_target,$(1)),$(call gb_Package_get_clean_target,$(1))))
$(call gb_Helper_make_userfriendly_targets,$(1),Package)
endef
# Ensure that the package is defined.
#
# gb_Package__check package
define gb_Package__check
$$(if $$(gb_Package_SOURCEDIR_$(1)),,$$(call gb_Output_error,gb_Package__check: Package $(1) has not been defined))
endef
# Set output dir for the package files.
#
# Default is $(INSTROOT).
#
# gb_Package_set_outdir package outdir
define gb_Package_set_outdir
$(call gb_Package__check,$(1))
gb_Package_OUTDIR_$(1) := $(2)
endef
define gb_Package_add_symbolic_link
$(call gb_Package__check,$(1))
$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_symbolic_link requires 3 arguments))
$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2)
$$(gb_Package_OUTDIR_$(1))/$(2) :| $$(dir $$(gb_Package_OUTDIR_$(1))/$(2)).dir
rm -f $$@ && ln -s $(3) $$@
$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
endef
define gb_Package_add_file
$(call gb_Package__check,$(1))
$(if $(strip $(3)),,$(call gb_Output_error,gb_Package_add_file requires 3 arguments))
$(call gb_Package_get_target,$(1)) : $$(gb_Package_OUTDIR_$(1))/$(2)
$(call gb_Package_get_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
$(call gb_Package_get_clean_target,$(1)) : FILES += $$(gb_Package_OUTDIR_$(1))/$(2)
$(call gb_PackagePart_PackagePart,$(2),$$(gb_Package_SOURCEDIR_$(1))/$(3),$(call gb_Package_get_preparation_target,$(1)),$$(gb_Package_OUTDIR_$(1)))
endef
# Adds several files at once.
#
# Files are copied directly into the specified directory.
#
# Example:
# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc))
# $(eval $(call gb_Package_add_files,foo_inc,inc/foo,foo/bar/foo.hxx))
# # -> inc/foo/foo.hxx
define gb_Package_add_files
$(call gb_Package__check,$(1))
$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing)))
$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(notdir $(file)),$(file)))
endef
# Adds several files at once.
#
# Files are copied including subdirectories.
#
# Example:
# $(eval $(call gb_Package_Package,foo_inc,$(SRCDIR)/foo/inc))
# $(eval $(call gb_Package_add_files,foo_inc,inc,foo/bar/foo.hxx))
# # -> inc/foo/bar/foo.hxx
define gb_Package_add_files_with_dir
$(call gb_Package__check,$(1))
$(if $(strip $(3)),,$(if $(filter 1,$(words $(2))),,$(call gb_Output_error,gb_Package_add_files: it looks like either pkg name or dest. dir is missing)))
$(foreach file,$(3),$(call gb_Package_add_file,$(1),$(2)/$(file),$(file)))
endef
# Package files from custom target
define gb_Package_use_custom_target
$(call gb_Package__check,$(1))
$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_CustomTarget_get_target,$(2))
endef
# Package files from unpacked tarball of an external project
define gb_Package_use_unpacked
$(call gb_Package__check,$(1))
$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_UnpackedTarball_get_target,$(2))
endef
# Package files from build of an external project
define gb_Package_use_external_project
$(call gb_Package__check,$(1))
$(call gb_Package_get_preparation_target,$(1)) :| $(call gb_ExternalProject_get_target,$(2))
endef
# vim: set noet sw=4:
alue='distro/mimo/mimo-6-3'>distro/mimo/mimo-6-3