/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the LibreOffice project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include /* The following macros extract parts from a sal_uInt32 value. These sal_uInt32 values are written out instead of the individual values to reduce the number of calls. */ #define SFX_REC_PRE(n) ( ((n) & 0x000000FF) ) #define SFX_REC_OFS(n) ( ((n) & 0xFFFFFF00) >> 8 ) #define SFX_REC_TYP(n) ( ((n) & 0x000000FF) ) #define SFX_REC_VER(n) ( ((n) & 0x0000FF00) >> 8 ) #define SFX_REC_TAG(n) ( ((n) & 0xFFFF0000) >> 16 ) #define SFX_REC_CONTENT_VER(n) ( ((n) & 0x000000FF) ) #define SFX_REC_CONTENT_OFS(n) ( ((n) & 0xFFFFFF00) >> 8 ) /* The following macros combine parts to a sal_uInt32 value. This sal_uInt32 value is written instead of the individual values to reduce the number of calls. */ static void lclWriteMiniHeader(SvStream *p, sal_uInt32 nPreTag, sal_uInt32 nStartPos, sal_uInt32 nEndPos) { (*p).WriteUInt32( sal_uInt32(nPreTag) | sal_uInt32(nEndPos-nStartPos-SFX_REC_HEADERSIZE_MINI) << 8 ); } static void lclWriteHeader(SvStream *p, sal_uInt32 nRecType, sal_uInt32 nContentTag, sal_uInt32 nContentVer) { (*p).WriteUInt32( sal_uInt32(nRecType) | ( sal_uInt32(nContentVer) << 8 ) | ( sal_uInt32(nContentTag) << 16 ) ); } #define SFX_REC_CONTENT_HEADER(nContentVer,n1StStartPos,nCurStartPos) \ ( sal_uInt32(nContentVer) | \ sal_uInt32( nCurStartPos - n1StStartPos ) << 8 ) /** Close the record; write the header * * @param bSeekToEndOfRec * if true (default) the stream is positioned at the end of the record; * if false the stream at the start of the content (so after the header). * * This method closes the record. The main function is to write the header. * If the header was written already this method is a no-op. * * @return sal_uInt32 != 0: Position im the stream immediately after the record. * If 'bSeekToEndOfRecord==sal_True' this will be equal to the current stream position. * == 0: The header was already written. */ sal_uInt32 SfxMiniRecordWriter::Close(bool bSeekToEndOfRec) { // The header wasn't written yet? if ( !_bHeaderOk ) { // Write header at the start of the record sal_uInt32 nEndPos = _pStream->Tell(); _pStream->Seek( _nStartPos ); lclWriteMiniHeader(_pStream, _nPreTag, _nStartPos, nEndPos ); // seek to the end of the record or stay where we are if ( bSeekToEndOfRec ) _pStream->Seek( nEndPos ); // the header has been written NOW _bHeaderOk = true; return nEndPos; } // Record was closed already return 0; } /** Internal method for belatedly processsing a header read externally. If the header corresponds to an End-Of-Record tag, an error code is set on the stream and sal_False is returned. But the stream will not be reset to the record start in case of an error. */ bool SfxMiniRecordReader::SetHeader_Impl( sal_uInt32 nHeader ) { bool bRet = true; // determine reord end and PreTag from the header _nEofRec = _pStream->Tell() + SFX_REC_OFS(nHeader); _nPreTag = sal::static_int_cast< sal_uInt8 >(SFX_REC_PRE(nHeader)); // Errror in cae of End of Record tag if ( _nPreTag == SFX_REC_PRETAG_EOR ) { _pStream->SetError( ERRCODE_IO_WRONGFORMAT ); bRet = true; } return bRet; } /** * * @param pstream * an \a SvStream, which has an \a SfxMiniRecord at the current position * @param nTag * Pre-Tag of the wanted record * * This constructor interprets a 'pStream' from the current position * as a continuous sequence of records that should be parsable by * this group of classes. The first record that is an * (possibly an extened-Record> that has the PreTag 'nTag' will be opened * and represented by this instance. * * If the end of stream is reached or a record with tag * SFX_REC_PRETAG_EOR is seen before a record with the wanted 'nTag' * tag is found, the created instance is invalid ('IsValid() == * sal_False'). The ERRCODE_IO_WRONGFORMAT error code will be set on * the stream,and the current position will be unchanged. * * If (the wanted tag) 'nTag==SFX_FILEREC_PRETAG_EOR' no attempt is * made to read a record, but 'IsValid()' is set to sal_False immediately. * This gives the possibility to include backward compatible SfxMiniRecords * without 'new' or 'delete'. See . * * Suggested usage: * * This constructor allows for adding new record types in a backward * compatible way by writing out a record with a new tag followed * by one with an old tag. In that case previous versions of the program * that do not recognise the new tag will skip the new record * automatically. This does cause a slight run time inefficiency, * compared just starting reading, but if the first record * is the wanted one the difference is just a comparision of 2 bytes. */ SfxMiniRecordReader::SfxMiniRecordReader(SvStream* pStream, sal_uInt8 nTag) : _pStream(pStream) , _nEofRec(0) , _bSkipped(nTag == SFX_REC_PRETAG_EOR) { // ignore if we are looking for SFX_REC_PRETAG_EOR if ( _bSkipped ) { _nPreTag = nTag; return; } // remember StartPos to be able to seek back in case of error sal_uInt32 nStartPos = pStream->Tell(); // look for the matching record while(true) { // read header SAL_INFO("svl", "SfxFileRec: searching record at " << pStream->Tell()); sal_uInt32 nHeader; pStream->ReadUInt32( nHeader ); // let the base class extract the header data SetHeader_Impl( nHeader ); // handle error, if any if ( pStream->IsEof() ) _nPreTag = SFX_REC_PRETAG_EOR; else if ( _nPreTag == SFX_REC_PRETAG_EOR ) pStream->SetError( ERRCODE_IO_WRONGFORMAT ); else { // stop the loop if the right tag is found if ( _nPreTag == nTag ) break; // or else skip the record and continue pStream->Seek( _nEofRec ); continue; } // seek back in case of error pStream->Seek( nStartPos ); break; } } /** * * @param nRecordType for sub classes * @param pStream stream to write the record to * @param nContentTag record type * @param nContentVer record version * * internal constructor for sub classes */ SfxSingleRecordWriter::SfxSingleRecordWriter(sal_uInt8 nRecordType, SvStream* pStream, sal_uInt16 nContentTag, sal_uInt8 nContentVer) : SfxMiniRecordWriter( pStream, SFX_REC_PRETAG_EXT ) { // write extend header after the SfxMiniRec lclWriteHeader(pStream, nRecordType, nContentTag, nContentVer); } /** * * Internal method for reading an SfxMultiRecord header, after * the base class has been initialized and its header has been read. * Set an error code on the stream if needed, but don't seek back * in case of error. */ inline bool SfxSingleRecordReader::ReadHeader_Impl( sal_uInt16 nTypes ) { bool bRet; // read header of the base class sal_uInt32 nHeader=0; _pStream->ReadUInt32( nHeader ); if ( !SetHeader_Impl( nHeader ) ) bRet = false; else { // read own header _pStream->ReadUInt32( nHeader ); _nRecordVer = sal::static_int_cast< sal_uInt8 >(SFX_REC_VER(nHeader)); _nRecordTag = sal::static_int_cast< sal_uInt16 >(SFX_REC_TAG(nHeader)); // wrong record type? _nRecordType = sal::static_int_cast< sal_uInt8 >(SFX_REC_TYP(nHeader)); bRet = 0 != ( nTypes & _nRecordType); } return bRet; } /** * * @param nTypes arithmetic OR of allowed record types * @param nTag record tag to find * * Internal method for reading the header of the first record * that has the tag 'nTag', for which then the type should be * one of the types in 'nTypes'. * * If such a record is not found an error code is set, the stream * position is seek-ed back and sal_False is returned. */ bool SfxSingleRecordReader::FindHeader_Impl(sal_uInt16 nTypes, sal_uInt16 nTag) { // remember StartPos to be able to seek back in case of error sal_uInt32 nStartPos = _pStream->Tell(); // look for the right record while ( !_pStream->IsEof() ) { // read header sal_uInt32 nHeader; SAL_INFO("svl", "SfxFileRec: searching record at " << _pStream->Tell()); _pStream->ReadUInt32( nHeader ); if ( !SetHeader_Impl( nHeader ) ) // EOR => abort loop break; // found extended record? if ( _nPreTag == SFX_REC_PRETAG_EXT ) { // read extended header _pStream->ReadUInt32( nHeader ); _nRecordTag = sal::static_int_cast< sal_uInt16 >(SFX_REC_TAG(nHeader)); // found right record? if ( _nRecordTag == nTag ) { // record type matches as well? _nRecordType = sal::static_int_cast< sal_uInt8 >( SFX_REC_TYP(nHeader)); if ( nTypes & _nRecordType ) // ==> found it return true; // error => abort loop break; } } // else skip if ( !_pStream->IsEof() ) _pStream->Seek( _nEofRec ); } // set error and seek back _pStream->SetError( ERRCODE_IO_WRONGFORMAT ); _pStream->Seek( nStartPos ); return false; } /** * * @param nRecordType sub class record type * @param pStream Stream to write the record to * @param nContentTag Content type * @param nContentVer Content version * * Internal method for sub classes */ SfxMultiFixRecordWriter::SfxMultiFixRecordWriter(sal_uInt8 nRecordType, SvStream* pStream, sal_uInt16 nContentTag, sal_uInt8 nContentVer) : SfxSingleRecordWriter( nRecordType, pStream, nContentTag, nContentVer ) , _nContentStartPos(0) , _nContentSize(0) , _nContentCount(0) { // space for own header pStream->SeekRel( + SFX_REC_HEADERSIZE_MULTI ); } sal_uInt32 SfxMultiFixRecordWriter::Close( bool bSeekToEndOfRec ) // see { // Header not written yet? if ( !_bHeaderOk ) { // remember position after header, to be able to seek back to it sal_uInt32 nEndPos = SfxSingleRecordWriter::Close( false ); // write extended header after SfxSingleRecord _pStream->WriteUInt16( _nContentCount ); _pStream->WriteUInt32( _nContentSize ); // seek to end of record or stay after the header if ( bSeekToEndOfRec ) _pStream->Seek(nEndPos); return nEndPos; } // Record was closed already return 0; } /** * * @param nRecordType Record type of the sub class * @param pStream stream to write the record to * @param nRecordTag record base type * @param nRecordVer record base version * * Internal constructor for sub classes */ SfxMultiVarRecordWriter::SfxMultiVarRecordWriter(sal_uInt8 nRecordType, SvStream* pStream, sal_uInt16 nRecordTag, sal_uInt8 nRecordVer) : SfxMultiFixRecordWriter( nRecordType, pStream, nRecordTag, nRecordVer ), _nContentVer( 0 ) { } /** * * @param pStream, stream to write the record to * @param nRecordTag record base type * @param nRecordVer record base version * * Starts an SfxMultiVarRecord in \a pStream, for which the size * of the content does not have to be known or identical; * after streaming a record its size will be calculated. * * Note: * * This method is not inline since too much code was generated * for initializing the members. */ SfxMultiVarRecordWriter::SfxMultiVarRecordWriter(SvStream* pStream, sal_uInt16 nRecordTag, sal_uInt8 nRecordVer) : SfxMultiFixRecordWriter( SFX_REC_TYPE_VARSIZE, pStream, nRecordTag, nRecordVer ), _nContentVer( 0 ) { } /** * * The destructor of class closes the * record automatically, in case * has not been called explicitly yet. */ SfxMultiVarRecordWriter::~SfxMultiVarRecordWriter() { // close if the header has not been written yet if ( !_bHeaderOk ) Close(); } /** * * Internal method for finishing individual content */ void SfxMultiVarRecordWriter::FlushContent_Impl() { // record the version and position offset of the current content; // the position offset is relative ot the start position of the // first content. assert(_aContentOfs.size() == static_cast(_nContentCount)-1); _aContentOfs.resize(_nContentCount-1); _aContentOfs.push_back( SFX_REC_CONTENT_HEADER(_nContentVer,_nStartPos,_nContentStartPos)); } void SfxMultiVarRecordWriter::NewContent() // see { // written Content already? if ( _nContentCount ) FlushContent_Impl(); // start new Content _nContentStartPos = _pStream->Tell(); ++_nContentCount; } sal_uInt32 SfxMultiVarRecordWriter::Close( bool bSeekToEndOfRec ) // see { // Header not written yet? if ( !_bHeaderOk ) { // finish content if needed if ( _nContentCount ) FlushContent_Impl(); // write out content offset table sal_uInt32 nContentOfsPos = _pStream->Tell(); //! (loop without braces) for ( sal_uInt16 n = 0; n < _nContentCount; ++n ) _pStream->WriteUInt32( _aContentOfs[n] ); // skip SfxMultiFixRecordWriter::Close()! sal_uInt32 nEndPos = SfxSingleRecordWriter::Close( false ); // write own header _pStream->WriteUInt16( _nContentCount ); if ( SFX_REC_TYPE_VARSIZE_RELOC == _nPreTag || SFX_REC_TYPE_MIXTAGS_RELOC == _nPreTag ) _pStream->WriteUInt32( static_cast(nContentOfsPos - ( _pStream->Tell() + sizeof(sal_uInt32) )) ); else _pStream->WriteUInt32( nContentOfsPos ); // seek to the end of the record or stay where we are if ( bSeekToEndOfRec ) _pStream->Seek(nEndPos); return nEndPos; } // Record was closed already return 0; } /** * * @param nContentTag tag for this content type * @param nContentVer content version * * With this method new Content is added to a record and * its tag and version are regorded. This method must be called * to start each content, including the first record. */ void SfxMultiMixRecordWriter::NewContent(sal_uInt16 nContentTag, sal_uInt8 nContentVer) { // Finish the previous record if necessary if ( _nContentCount ) FlushContent_Impl(); // Write the content tag, and record the version and starting position _nContentStartPos = _pStream->Tell(); ++_nContentCount; _pStream->WriteUInt16( nContentTag ); _nContentVer = nContentVer; } /** * * Internal method for reading an SfxMultiRecord-Headers, after * the base class has been initialized and its header has been read. * If an error occurs an error code is set on the stream, but * the stream position will not be seek-ed back in that case. */ bool SfxMultiRecordReader::ReadHeader_Impl() { // read own header _pStream->ReadUInt16( _nContentCount ); _pStream->ReadUInt32( _nContentSize ); // Fix: each on its own, Var|Mix: table position // do we still need to rade a table with Content offsets? if ( _nRecordType != SFX_REC_TYPE_FIXSIZE ) { // read table from the stream sal_uInt32 nContentPos = _pStream->Tell(); if ( _nRecordType == SFX_REC_TYPE_VARSIZE_RELOC || _nRecordType == SFX_REC_TYPE_MIXTAGS_RELOC ) _pStream->SeekRel( + _nContentSize ); else _pStream->Seek( _nContentSize ); _pContentOfs = new sal_uInt32[_nContentCount]; memset(_pContentOfs, 0, _nContentCount*sizeof(sal_uInt32)); #if defined(OSL_LITENDIAN) _pStream->Read( _pContentOfs, sizeof(sal_uInt32)*_nContentCount ); #else // (loop without braces) for ( sal_uInt16 n = 0; n < _nContentCount; ++n ) _pStream->ReadUInt32( _pContentOfs[n] ); #endif _pStream->Seek( nContentPos ); } // It was possible to read the error if no error is set on the stream return !_pStream->GetError(); } SfxMultiRecordReader::SfxMultiRecordReader( SvStream *pStream, sal_uInt16 nTag ) : _pContentOfs(0) , _nContentSize(0) , _nContentCount(0) , _nContentNo(0) , _nContentTag( 0 ) , _nContentVer( 0 ) { // remember position in the stream to be able seek back in case of error _nStartPos = pStream->Tell(); // look for matching record and initialize base class SfxSingleRecordReader::Construct_Impl( pStream ); if ( SfxSingleRecordReader::FindHeader_Impl( SFX_REC_TYPE_FIXSIZE | SFX_REC_TYPE_VARSIZE | SFX_REC_TYPE_VARSIZE_RELOC | SFX_REC_TYPE_MIXTAGS | SFX_REC_TYPE_MIXTAGS_RELOC, nTag ) ) { // also read own header if ( !ReadHeader_Impl() ) // not readable => mark as invalid and reset stream position SetInvalid_Impl( _nStartPos); } } SfxMultiRecordReader::~SfxMultiRecordReader() { delete[] _pContentOfs; } /** * * Positions the stream at the start of the next Content, or * for the first call at the start of the first Content in the record, * and reads its header if necessary. * * @return sal_False if there is no further Content according to * the record header. Even if sal_True is returned an error can * be set on the stream, for instance if the record finished prematurely * in a broken file. */ bool SfxMultiRecordReader::GetContent() { // more Content available? if ( _nContentNo < _nContentCount ) { // position the stream at the start of the Content sal_uInt32 nOffset = _nRecordType == SFX_REC_TYPE_FIXSIZE ? _nContentNo * _nContentSize : SFX_REC_CONTENT_OFS(_pContentOfs[_nContentNo]); sal_uInt32 nNewPos = _nStartPos + nOffset; DBG_ASSERT( nNewPos >= _pStream->Tell(), "SfxMultiRecordReader::GetContent() - New position before current, to much data red!" ); // #99366#: correct stream pos in every case; // the if clause was added by MT a long time ago, // maybe to 'repair' other corrupt documents; but this // gives errors when writing with 5.1 and reading with current // versions, so we decided to remove the if clause (KA-05/17/2002) // if ( nNewPos > _pStream->Tell() ) _pStream->Seek( nNewPos ); // ggf. Content-Header lesen if ( _nRecordType == SFX_REC_TYPE_MIXTAGS || _nRecordType == SFX_REC_TYPE_MIXTAGS_RELOC ) { _nContentVer = sal::static_int_cast< sal_uInt8 >( SFX_REC_CONTENT_VER(_pContentOfs[_nContentNo])); _pStream->ReadUInt16( _nContentTag ); } // ContentNo weiterz"ahlen ++_nContentNo; return true; } return false; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */