/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
* This file is part of the LibreOffice project.
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/.
*
* This file incorporates work covered by the following license notice:
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed
* with this work for additional information regarding copyright
* ownership. The ASF licenses this file to you under the Apache
* License, Version 2.0 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.apache.org/licenses/LICENSE-2.0 .
*/
#ifdef _MSC_VER
#pragma hdrstop
#endif
#include <svtools/optionsdrawinglayer.hxx>
#include <unotools/configmgr.hxx>
#include <unotools/configitem.hxx>
#include <tools/debug.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>
#include <vcl/svapp.hxx>
#include <vcl/outdev.hxx>
#include <rtl/instance.hxx>
//_________________________________________________________________________________________________________________
// namespaces
//_________________________________________________________________________________________________________________
using namespace ::utl ;
using namespace ::rtl ;
using namespace ::osl ;
using namespace ::com::sun::star::uno ;
#define ROOTNODE_START OUString("Office.Common/Drawinglayer" )
#define DEFAULT_OVERLAYBUFFER sal_True
#define DEFAULT_PAINTBUFFER sal_True
#define DEFAULT_STRIPE_COLOR_A 0
#define DEFAULT_STRIPE_COLOR_B 16581375
#define DEFAULT_STRIPE_LENGTH 4
// #i73602#
// #i74769#, #i75172# : Change default for Calc and Writer to True
#define DEFAULT_OVERLAYBUFFER_CALC sal_True
#define DEFAULT_OVERLAYBUFFER_WRITER sal_True
#define DEFAULT_OVERLAYBUFFER_DRAWIMPRESS sal_True
// #i74769#, #i75172#
#define DEFAULT_PAINTBUFFER_CALC sal_True
#define DEFAULT_PAINTBUFFER_WRITER sal_True
#define DEFAULT_PAINTBUFFER_DRAWIMPRESS sal_True
// #i4219#
#define DEFAULT_MAXIMUMPAPERWIDTH 300
#define DEFAULT_MAXIMUMPAPERHEIGHT 300
#define DEFAULT_MAXIMUMPAPERLEFTMARGIN 9999
#define DEFAULT_MAXIMUMPAPERRIGHTMARGIN 9999
#define DEFAULT_MAXIMUMPAPERTOPMARGIN 9999
#define DEFAULT_MAXIMUMPAPERBOTTOMMARGIN 9999
// primitives
#define DEFAULT_ANTIALIASING sal_True
#define DEFAULT_SNAPHORVERLINESTODISCRETE sal_True
#define DEFAULT_SOLIDDRAGCREATE sal_True
#define DEFAULT_RENDERDECORATEDTEXTDIRECT sal_True
#define DEFAULT_RENDERSIMPLETEXTDIRECT sal_True
#define DEFAULT_QUADRATIC3DRENDERLIMIT 1000000
#define DEFAULT_QUADRATICFORMCONTROLRENDERLIMIT 45000
// #i97672# selection settings
#define DEFAULT_TRANSPARENTSELECTION sal_True
#define DEFAULT_TRANSPARENTSELECTIONPERCENT 75
#define DEFAULT_SELECTIONMAXIMUMLUMINANCEPERCENT 70
#define PROPERTYNAME_OVERLAYBUFFER OUString("OverlayBuffer" )
#define PROPERTYNAME_PAINTBUFFER OUString("PaintBuffer" )
#define PROPERTYNAME_STRIPE_COLOR_A OUString("StripeColorA" )
#define PROPERTYNAME_STRIPE_COLOR_B OUString("StripeColorB" )
#define PROPERTYNAME_STRIPE_LENGTH OUString("StripeLength" )
// #i73602#
#define PROPERTYNAME_OVERLAYBUFFER_CALC OUString("OverlayBuffer_Calc")
#define PROPERTYNAME_OVERLAYBUFFER_WRITER OUString("OverlayBuffer_Writer")
#define PROPERTYNAME_OVERLAYBUFFER_DRAWIMPRESS OUString("OverlayBuffer_DrawImpress")
// #i74769#, #i75172#
#define PROPERTYNAME_PAINTBUFFER_CALC OUString("PaintBuffer_Calc")
#define PROPERTYNAME_PAINTBUFFER_WRITER OUString("PaintBuffer_Writer")
#define PROPERTYNAME_PAINTBUFFER_DRAWIMPRESS OUString("PaintBuffer_DrawImpress")
// #i4219#
#define PROPERTYNAME_MAXIMUMPAPERWIDTH OUString("MaximumPaperWidth")
#define PROPERTYNAME_MAXIMUMPAPERHEIGHT OUString("MaximumPaperHeight")
#define PROPERTYNAME_MAXIMUMPAPERLEFTMARGIN OUString("MaximumPaperLeftMargin")
#define PROPERTYNAME_MAXIMUMPAPERRIGHTMARGIN OUString("MaximumPaperRightMargin")
#define PROPERTYNAME_MAXIMUMPAPERTOPMARGIN OUString("MaximumPaperTopMargin")
#define PROPERTYNAME_MAXIMUMPAPERBOTTOMMARGIN OUString("MaximumPaperBottomMargin")
// primitives
#define PROPERTYNAME_ANTIALIASING OUString("AntiAliasing")
#define PROPERTYNAME_SNAPHORVERLINESTODISCRETE OUString("SnapHorVerLinesToDiscrete")
#define PROPERTYNAME_SOLIDDRAGCREATE OUString("SolidDragCreate")
#define PROPERTYNAME_RENDERDECORATEDTEXTDIRECT OUString("RenderDecoratedTextDirect")
#define PROPERTYNAME_RENDERSIMPLETEXTDIRECT OUString("RenderSimpleTextDirect")
#define PROPERTYNAME_QUADRATIC3DRENDERLIMIT OUString("Quadratic3DRenderLimit")
#define PROPERTYNAME_QUADRATICFORMCONTROLRENDERLIMIT OUString("QuadraticFormControlRenderLimit")
// #i97672# selection settings
#define PROPERTYNAME_TRANSPARENTSELECTION OUString("TransparentSelection")
#define PROPERTYNAME_TRANSPARENTSELECTIONPERCENT OUString("TransparentSelectionPercent")
#define PROPERTYNAME_SELECTIONMAXIMUMLUMINANCEPERCENT OUString("SelectionMaximumLuminancePercent")
#define PROPERTYHANDLE_OVERLAYBUFFER 0
#define PROPERTYHANDLE_PAINTBUFFER 1
#define PROPERTYHANDLE_STRIPE_COLOR_A 2
#define PROPERTYHANDLE_STRIPE_COLOR_B 3
#define PROPERTYHANDLE_STRIPE_LENGTH 4
// #i73602#
#define PROPERTYHANDLE_OVERLAYBUFFER_CALC 5
#define PROPERTYHANDLE_OVERLAYBUFFER_WRITER 6
#define PROPERTYHANDLE_OVERLAYBUFFER_DRAWIMPRESS 7
// #i74769#, #i75172#
#define PROPERTYHANDLE_PAINTBUFFER_CALC 8
#define PROPERTYHANDLE_PAINTBUFFER_WRITER 9
#define PROPERTYHANDLE_PAINTBUFFER_DRAWIMPRESS 10
// #i4219#
#define PROPERTYHANDLE_MAXIMUMPAPERWIDTH 11
#define PROPERTYHANDLE_MAXIMUMPAPERHEIGHT 12
#define PROPERTYHANDLE_MAXIMUMPAPERLEFTMARGIN 13
#define PROPERTYHANDLE_MAXIMUMPAPERRIGHTMARGIN 14
#define PROPERTYHANDLE_MAXIMUMPAPERTOPMARGIN 15
#define PROPERTYHANDLE_MAXIMUMPAPERBOTTOMMARGIN 16
// primitives
#define PROPERTYHANDLE_ANTIALIASING 17
#define PROPERTYHANDLE_SNAPHORVERLINESTODISCRETE 18
#define PROPERTYHANDLE_SOLIDDRAGCREATE 19
#define PROPERTYHANDLE_RENDERDECORATEDTEXTDIRECT 20
#define PROPERTYHANDLE_RENDERSIMPLETEXTDIRECT 21
#define PROPERTYHANDLE_QUADRATIC3DRENDERLIMIT 22
#define PROPERTYHANDLE_QUADRATICFORMCONTROLRENDERLIMIT 23
// #i97672# selection settings
#define PROPERTYHANDLE_TRANSPARENTSELECTION 24
#define PROPERTYHANDLE_TRANSPARENTSELECTIONPERCENT 25
#define PROPERTYHANDLE_SELECTIONMAXIMUMLUMINANCEPERCENT 26
#define PROPERTYCOUNT 27
class SvtOptionsDrawinglayer_Impl : public ConfigItem
{
public:
//---------------------------------------------------------------------------------------------------------
// constructor / destructor
//---------------------------------------------------------------------------------------------------------
SvtOptionsDrawinglayer_Impl();
~SvtOptionsDrawinglayer_Impl();
//---------------------------------------------------------------------------------------------------------
// overloaded methods of baseclass
//---------------------------------------------------------------------------------------------------------
virtual void Commit();
virtual void Notify( const com::sun::star::uno::Sequence<OUString>& aPropertyNames);
//---------------------------------------------------------------------------------------------------------
// public interface
//---------------------------------------------------------------------------------------------------------
sal_Bool IsOverlayBuffer() const;
sal_Bool IsPaintBuffer() const;
Color GetStripeColorA() const;
Color GetStripeColorB() const;
sal_uInt16 GetStripeLength() const;
// #i73602#
sal_Bool IsOverlayBuffer_Calc() const;
sal_Bool IsOverlayBuffer_Writer() const;
sal_Bool IsOverlayBuffer_DrawImpress() const;
// #i74769#, #i75172#
sal_Bool IsPaintBuffer_Calc() const;
sal_Bool IsPaintBuffer_Writer() const;
sal_Bool IsPaintBuffer_DrawImpress() const;
// #i4219#
sal_uInt32 GetMaximumPaperWidth() const;
sal_uInt32 GetMaximumPaperHeight() const;
sal_uInt32 GetMaximumPaperLeftMargin() const;
sal_uInt32 GetMaximumPaperRightMargin() const;
sal_uInt32 GetMaximumPaperTopMargin() const;
sal_uInt32 GetMaximumPaperBottomMargin() const;
// helper
sal_Bool IsAAPossibleOnThisSystem() const;
// primitives
sal_Bool IsAntiAliasing() const;
sal_Bool IsSnapHorVerLinesToDiscrete() const;
sal_Bool IsSolidDragCreate() const;
sal_Bool IsRenderDecoratedTextDirect() const;
sal_Bool IsRenderSimpleTextDirect() const;
sal_uInt32 GetQuadratic3DRenderLimit() const;
sal_uInt32 GetQuadraticFormControlRenderLimit() const;
void SetAntiAliasing( sal_Bool bState );
// #i97672# selection settings
sal_Bool IsTransparentSelection() const;
sal_uInt16 GetTransparentSelectionPercent() const;
sal_uInt16 GetSelectionMaximumLuminancePercent() const;
void SetTransparentSelection( sal_Bool bState );
void SetTransparentSelectionPercent( sal_uInt16 nPercent );
//-------------------------------------------------------------------------------------------------------------
// private methods
//-------------------------------------------------------------------------------------------------------------
private:
static Sequence< OUString > impl_GetPropertyNames();
//-------------------------------------------------------------------------------------------------------------
// private member
//-------------------------------------------------------------------------------------------------------------
private:
sal_Bool m_bOverlayBuffer;
sal_Bool m_bPaintBuffer;
Color m_bStripeColorA;
Color m_bStripeColorB;
sal_uInt16 m_nStripeLength;
// #i73602#
sal_Bool m_bOverlayBuffer_Calc;
sal_Bool m_bOverlayBuffer_Writer;
sal_Bool m_bOverlayBuffer_DrawImpress;
// #i74769#, #i75172#
sal_Bool m_bPaintBuffer_Calc;
sal_Bool m_bPaintBuffer_Writer;
sal_Bool m_bPaintBuffer_DrawImpress;
// #i4219#
sal_uInt32 m_nMaximumPaperWidth;
sal_uInt32 m_nMaximumPaperHeight;
sal_uInt32 m_nMaximumPaperLeftMargin;
sal_uInt32 m_nMaximumPaperRightMargin;
sal_uInt32 m_nMaximumPaperTopMargin;
sal_uInt32 m_nMaximumPaperBottomMargin;
// primitives
sal_Bool m_bAntiAliasing;
sal_Bool m_bSnapHorVerLinesToDiscrete;
sal_Bool m_bSolidDragCreate;
sal_Bool m_bRenderDecoratedTextDirect;
sal_Bool m_bRenderSimpleTextDirect;
sal_uInt32 m_nQuadratic3DRenderLimit;
sal_uInt32 m_nQuadraticFormControlRenderLimit;
// #i97672# selection settings
sal_uInt16 m_nTransparentSelectionPercent;
sal_uInt16 m_nSelectionMaximumLuminancePercent;
sal_Bool m_bTransparentSelection;
// local values
bool m_bAllowAA : 1;
bool m_bAllowAAChecked : 1;
};
//*****************************************************************************************************************
// constructor
//*****************************************************************************************************************
SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl() :
ConfigItem( ROOTNODE_START ),
m_bOverlayBuffer( DEFAULT_OVERLAYBUFFER ),
m_bPaintBuffer( DEFAULT_PAINTBUFFER ),
m_bStripeColorA(Color(DEFAULT_STRIPE_COLOR_A)),
m_bStripeColorB(Color(DEFAULT_STRIPE_COLOR_B)),
m_nStripeLength(DEFAULT_STRIPE_LENGTH),
// #i73602#
m_bOverlayBuffer_Calc( DEFAULT_OVERLAYBUFFER_CALC ),
m_bOverlayBuffer_Writer( DEFAULT_OVERLAYBUFFER_WRITER ),
m_bOverlayBuffer_DrawImpress( DEFAULT_OVERLAYBUFFER_DRAWIMPRESS ),
// #i74769#, #i75172#
m_bPaintBuffer_Calc( DEFAULT_PAINTBUFFER_CALC ),
m_bPaintBuffer_Writer( DEFAULT_PAINTBUFFER_WRITER ),
m_bPaintBuffer_DrawImpress( DEFAULT_PAINTBUFFER_DRAWIMPRESS ),
// #i4219#
m_nMaximumPaperWidth(DEFAULT_MAXIMUMPAPERWIDTH),
m_nMaximumPaperHeight(DEFAULT_MAXIMUMPAPERHEIGHT),
m_nMaximumPaperLeftMargin(DEFAULT_MAXIMUMPAPERLEFTMARGIN),
m_nMaximumPaperRightMargin(DEFAULT_MAXIMUMPAPERRIGHTMARGIN),
m_nMaximumPaperTopMargin(DEFAULT_MAXIMUMPAPERTOPMARGIN),
m_nMaximumPaperBottomMargin(DEFAULT_MAXIMUMPAPERBOTTOMMARGIN),
// primitives
m_bAntiAliasing(DEFAULT_ANTIALIASING),
m_bSnapHorVerLinesToDiscrete(DEFAULT_SNAPHORVERLINESTODISCRETE),
m_bSolidDragCreate(DEFAULT_SOLIDDRAGCREATE),
m_bRenderDecoratedTextDirect(DEFAULT_RENDERDECORATEDTEXTDIRECT),
m_bRenderSimpleTextDirect(DEFAULT_RENDERSIMPLETEXTDIRECT),
m_nQuadratic3DRenderLimit(DEFAULT_QUADRATIC3DRENDERLIMIT),
m_nQuadraticFormControlRenderLimit(DEFAULT_QUADRATICFORMCONTROLRENDERLIMIT),
// #i97672# selection settings
m_nTransparentSelectionPercent(DEFAULT_TRANSPARENTSELECTIONPERCENT),
m_nSelectionMaximumLuminancePercent(DEFAULT_SELECTIONMAXIMUMLUMINANCEPERCENT),
m_bTransparentSelection(DEFAULT_TRANSPARENTSELECTION),
// local values
m_bAllowAA(true),
m_bAllowAAChecked(false)
{
Sequence< OUString > seqNames( impl_GetPropertyNames() );
Sequence< Any > seqValues = GetProperties( seqNames ) ;
DBG_ASSERT( !(seqNames.getLength()!=seqValues.getLength()), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nI miss some values of configuration keys!\n" );
// Copy values from list in right order to our internal member.
sal_Int32 nPropertyCount = seqValues.getLength();
for(sal_Int32 nProperty=0; nProperty<nPropertyCount; ++nProperty )
{
if (seqValues[nProperty].hasValue()==sal_False)
continue;
switch( nProperty )
{
case PROPERTYHANDLE_OVERLAYBUFFER:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\OverlayBuffer\"?" );
seqValues[nProperty] >>= m_bOverlayBuffer;
}
break;
case PROPERTYHANDLE_PAINTBUFFER:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\PaintBuffer\"?" );
seqValues[nProperty] >>= m_bPaintBuffer;
}
break;
case PROPERTYHANDLE_STRIPE_COLOR_A:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\StripeColorA\"?" );
sal_Int32 nValue = 0;
seqValues[nProperty] >>= nValue;
m_bStripeColorA = nValue;
}
break;
case PROPERTYHANDLE_STRIPE_COLOR_B:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\StripeColorB\"?" );
sal_Int32 nValue = 0;
seqValues[nProperty] >>= nValue;
m_bStripeColorB = nValue;
}
break;
case PROPERTYHANDLE_STRIPE_LENGTH:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_SHORT), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\StripeLength\"?" );
seqValues[nProperty] >>= m_nStripeLength;
}
break;
// #i73602#
case PROPERTYHANDLE_OVERLAYBUFFER_CALC:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\OverlayBuffer_Calc\"?" );
seqValues[nProperty] >>= m_bOverlayBuffer_Calc;
}
break;
case PROPERTYHANDLE_OVERLAYBUFFER_WRITER:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\OverlayBuffer_Writer\"?" );
seqValues[nProperty] >>= m_bOverlayBuffer_Writer;
}
break;
case PROPERTYHANDLE_OVERLAYBUFFER_DRAWIMPRESS:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\OverlayBuffer_DrawImpress\"?" );
seqValues[nProperty] >>= m_bOverlayBuffer_DrawImpress;
}
break;
// #i74769#, #i75172#
case PROPERTYHANDLE_PAINTBUFFER_CALC:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\PaintBuffer_Calc\"?" );
seqValues[nProperty] >>= m_bPaintBuffer_Calc;
}
break;
case PROPERTYHANDLE_PAINTBUFFER_WRITER:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\PaintBuffer_Writer\"?" );
seqValues[nProperty] >>= m_bPaintBuffer_Writer;
}
break;
case PROPERTYHANDLE_PAINTBUFFER_DRAWIMPRESS:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\PaintBuffer_DrawImpress\"?" );
seqValues[nProperty] >>= m_bPaintBuffer_DrawImpress;
}
break;
// #i4219#
case PROPERTYHANDLE_MAXIMUMPAPERWIDTH:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperWidth\"?" );
seqValues[nProperty] >>= m_nMaximumPaperWidth;
}
break;
case PROPERTYHANDLE_MAXIMUMPAPERHEIGHT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperHeight\"?" );
seqValues[nProperty] >>= m_nMaximumPaperHeight;
}
break;
case PROPERTYHANDLE_MAXIMUMPAPERLEFTMARGIN:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperLeftMargin\"?" );
seqValues[nProperty] >>= m_nMaximumPaperLeftMargin;
}
break;
case PROPERTYHANDLE_MAXIMUMPAPERRIGHTMARGIN:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperRightMargin\"?" );
seqValues[nProperty] >>= m_nMaximumPaperRightMargin;
}
break;
case PROPERTYHANDLE_MAXIMUMPAPERTOPMARGIN:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperTopMargin\"?" );
seqValues[nProperty] >>= m_nMaximumPaperTopMargin;
}
break;
case PROPERTYHANDLE_MAXIMUMPAPERBOTTOMMARGIN:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\MaximumPaperBottomMargin\"?" );
seqValues[nProperty] >>= m_nMaximumPaperBottomMargin;
}
break;
// primitives
case PROPERTYHANDLE_ANTIALIASING:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\AntiAliasing\"?" );
seqValues[nProperty] >>= m_bAntiAliasing;
}
break;
// primitives
case PROPERTYHANDLE_SNAPHORVERLINESTODISCRETE:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\SnapHorVerLinesToDiscrete\"?" );
seqValues[nProperty] >>= m_bSnapHorVerLinesToDiscrete;
}
break;
case PROPERTYHANDLE_SOLIDDRAGCREATE:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\SolidDragCreate\"?" );
seqValues[nProperty] >>= m_bSolidDragCreate;
}
break;
case PROPERTYHANDLE_RENDERDECORATEDTEXTDIRECT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\RenderDecoratedTextDirect\"?" );
seqValues[nProperty] >>= m_bRenderDecoratedTextDirect;
}
break;
case PROPERTYHANDLE_RENDERSIMPLETEXTDIRECT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\RenderSimpleTextDirect\"?" );
seqValues[nProperty] >>= m_bRenderSimpleTextDirect;
}
break;
case PROPERTYHANDLE_QUADRATIC3DRENDERLIMIT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\Quadratic3DRenderLimit\"?" );
seqValues[nProperty] >>= m_nQuadratic3DRenderLimit;
}
break;
case PROPERTYHANDLE_QUADRATICFORMCONTROLRENDERLIMIT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_LONG), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\QuadraticFormControlRenderLimit\"?" );
seqValues[nProperty] >>= m_nQuadraticFormControlRenderLimit;
}
break;
// #i97672# selection settings
case PROPERTYHANDLE_TRANSPARENTSELECTION:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_BOOLEAN), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\TransparentSelection\"?" );
seqValues[nProperty] >>= m_bTransparentSelection;
}
break;
case PROPERTYHANDLE_TRANSPARENTSELECTIONPERCENT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_SHORT), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\TransparentSelectionPercent\"?" );
seqValues[nProperty] >>= m_nTransparentSelectionPercent;
}
case PROPERTYHANDLE_SELECTIONMAXIMUMLUMINANCEPERCENT:
{
DBG_ASSERT(!(seqValues[nProperty].getValueTypeClass()!=TypeClass_SHORT), "SvtOptionsDrawinglayer_Impl::SvtOptionsDrawinglayer_Impl()\nWho has changed the value type of \"Office.Common\\Drawinglayer\\SelectionMaximumLuminancePercent\"?" );
seqValues[nProperty] >>= m_nSelectionMaximumLuminancePercent;
}
break;
}
}
}
//*****************************************************************************************************************
// destructor
//*****************************************************************************************************************
SvtOptionsDrawinglayer_Impl::~SvtOptionsDrawinglayer_Impl()
{
if( IsModified() )
Commit();
}
//*****************************************************************************************************************
// Commit
//*****************************************************************************************************************
void SvtOptionsDrawinglayer_Impl::Commit()
{
Sequence< OUString > aSeqNames( impl_GetPropertyNames() );
Sequence< Any > aSeqValues( aSeqNames.getLength() );
for( sal_Int32 nProperty = 0, nCount = aSeqNames.getLength(); nProperty < nCount; ++nProperty )
{
switch( nProperty )
{
case PROPERTYHANDLE_OVERLAYBUFFER:
aSeqValues[nProperty] <<= m_bOverlayBuffer;
break;
case PROPERTYHANDLE_PAINTBUFFER:
aSeqValues[nProperty] <<= m_bPaintBuffer;
break;
case PROPERTYHANDLE_STRIPE_COLOR_A:
aSeqValues[nProperty] <<= m_bStripeColorA.GetColor();
break;
case PROPERTYHANDLE_STRIPE_COLOR_B:
aSeqValues[nProperty] <<= m_bStripeColorB.GetColor();
break;
case PROPERTYHANDLE_STRIPE_LENGTH:
aSeqValues[nProperty] <<= m_nStripeLength;
break;
// #i73602#
case PROPERTYHANDLE_OVERLAYBUFFER_CALC:
aSeqValues[nProperty] <<= m_bOverlayBuffer_Calc;
break;
case PROPERTYHANDLE_OVERLAYBUFFER_WRITER:
aSeqValues[nProperty] <<= m_bOverlayBuffer_Writer;
break;
case PROPERTYHANDLE_OVERLAYBUFFER_DRAWIMPRESS:
aSeqValues[nProperty] <<= m_bOverlayBuffer_DrawImpress;
break;
// #i74769#, #i75172#
case PROPERTYHANDLE_PAINTBUFFER_CALC:
aSeqValues[nProperty] <<= m_bPaintBuffer_Calc;
break;
case PROPERTYHANDLE_PAINTBUFFER_WRITER:
aSeqValues[nProperty] <<= m_bPaintBuffer_Writer;
break;
case PROPERTYHANDLE_PAINTBUFFER_DRAWIMPRESS:
aSeqValues[nProperty] <<= m_bPaintBuffer_DrawImpress;
break;
// #i4219#
case PROPERTYHANDLE_MAXIMUMPAPERWIDTH:
aSeqValues[nProperty] <<= m_nMaximumPaperWidth;
break;
case PROPERTYHANDLE_MAXIMUMPAPERHEIGHT:
aSeqValues[nProperty] <<= m_nMaximumPaperHeight;
break;
case PROPERTYHANDLE_MAXIMUMPAPERLEFTMARGIN:
aSeqValues[nProperty] <<= m_nMaximumPaperLeftMargin;
break;
case PROPERTYHANDLE_MAXIMUMPAPERRIGHTMARGIN:
aSeqValues[nProperty] <<= m_nMaximumPaperRightMargin;
break;
case PROPERTYHANDLE_MAXIMUMPAPERTOPMARGIN:
aSeqValues[nProperty] <<= m_nMaximumPaperTopMargin;
break;
case PROPERTYHANDLE_MAXIMUMPAPERBOTTOMMARGIN:
aSeqValues[nProperty] <<= m_nMaximumPaperBottomMargin;
break;
// primitives
case PROPERTYHANDLE_ANTIALIASING:
aSeqValues[nProperty] <<= m_bAntiAliasing;
break;
case PROPERTYHANDLE_SNAPHORVERLINESTODISCRETE:
aSeqValues[nProperty] <<= m_bSnapHorVerLinesToDiscrete;
break;
case PROPERTYHANDLE_SOLIDDRAGCREATE:
aSeqValues[nProperty] <<= m_bSolidDragCreate;
break;
case PROPERTYHANDLE_RENDERDECORATEDTEXTDIRECT:
aSeqValues[nProperty] <<= m_bRenderDecoratedTextDirect;
break;
case PROPERTYHANDLE_RENDERSIMPLETEXTDIRECT:
aSeqValues[nProperty] <<= m_bRenderSimpleTextDirect;
break;
case PROPERTYHANDLE_QUADRATIC3DRENDERLIMIT:
aSeqValues[nProperty] <<= m_nQuadratic3DRenderLimit;
break;
case PROPERTYHANDLE_QUADRATICFORMCONTROLRENDERLIMIT:
aSeqValues[nProperty] <<= m_nQuadraticFormControlRenderLimit;
break;
// #i97672# selection settings
case PROPERTYHANDLE_TRANSPARENTSELECTION:
aSeqValues[nProperty] <<= m_bTransparentSelection;
break;
case PROPERTYHANDLE_TRANSPARENTSELECTIONPERCENT:
aSeqValues[nProperty] <<= m_nTransparentSelectionPercent;
break;
case PROPERTYHANDLE_SELECTIONMAXIMUMLUMINANCEPERCENT:
aSeqValues[nProperty] <<= m_nSelectionMaximumLuminancePercent;
break;
}
}
PutProperties( aSeqNames, aSeqValues );
}
void SvtOptionsDrawinglayer_Impl::Notify( const com::sun::star::uno::Sequence<OUString>& )
{
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtOptionsDrawinglayer_Impl::IsOverlayBuffer() const
{
return m_bOverlayBuffer;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtOptionsDrawinglayer_Impl::IsPaintBuffer() const
{
return m_bPaintBuffer;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
Color SvtOptionsDrawinglayer_Impl::GetStripeColorA() const
{
return m_bStripeColorA;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
Color SvtOptionsDrawinglayer_Impl::GetStripeColorB() const
{
return m_bStripeColorB;
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_uInt16 SvtOptionsDrawinglayer_Impl::GetStripeLength() const
{
return m_nStripeLength;
}
// #i73602#
sal_Bool SvtOptionsDrawinglayer_Impl::IsOverlayBuffer_Calc() const
{
return m_bOverlayBuffer_Calc;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsOverlayBuffer_Writer() const
{
return m_bOverlayBuffer_Writer;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsOverlayBuffer_DrawImpress() const
{
return m_bOverlayBuffer_DrawImpress;
}
// #i74769#, #i75172#
sal_Bool SvtOptionsDrawinglayer_Impl::IsPaintBuffer_Calc() const
{
return m_bPaintBuffer_Calc;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsPaintBuffer_Writer() const
{
return m_bPaintBuffer_Writer;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsPaintBuffer_DrawImpress() const
{
return m_bPaintBuffer_DrawImpress;
}
// #i4219#
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperWidth() const
{
return m_nMaximumPaperWidth;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperHeight() const
{
return m_nMaximumPaperHeight;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperLeftMargin() const
{
return m_nMaximumPaperLeftMargin;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperRightMargin() const
{
return m_nMaximumPaperRightMargin;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperTopMargin() const
{
return m_nMaximumPaperTopMargin;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetMaximumPaperBottomMargin() const
{
return m_nMaximumPaperBottomMargin;
}
// helper
sal_Bool SvtOptionsDrawinglayer_Impl::IsAAPossibleOnThisSystem() const
{
if(!m_bAllowAAChecked)
{
SvtOptionsDrawinglayer_Impl* pThat = const_cast< SvtOptionsDrawinglayer_Impl* >(this);
pThat->m_bAllowAAChecked = true;
#ifdef WIN32
// WIN32 uses GDIPlus with VCL forthe first incarnation; this will be enhanced
// in the future to use canvases and the canvas renderer, thus a AA-abled
// canvas needs to be checked here in the future.
// Currently, just allow AA for WIN32
#endif
// check XRenderExtension
if(m_bAllowAA && !Application::GetDefaultDevice()->supportsOperation( OutDevSupport_TransparentRect ))
{
pThat->m_bAllowAA = false;
}
}
return m_bAllowAA;
}
// primitives
sal_Bool SvtOptionsDrawinglayer_Impl::IsAntiAliasing() const
{
return m_bAntiAliasing;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsSnapHorVerLinesToDiscrete() const
{
return m_bSnapHorVerLinesToDiscrete;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsSolidDragCreate() const
{
return m_bSolidDragCreate;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsRenderDecoratedTextDirect() const
{
return m_bRenderDecoratedTextDirect;
}
sal_Bool SvtOptionsDrawinglayer_Impl::IsRenderSimpleTextDirect() const
{
return m_bRenderSimpleTextDirect;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetQuadratic3DRenderLimit() const
{
return m_nQuadratic3DRenderLimit;
}
sal_uInt32 SvtOptionsDrawinglayer_Impl::GetQuadraticFormControlRenderLimit() const
{
return m_nQuadraticFormControlRenderLimit;
}
void SvtOptionsDrawinglayer_Impl::SetAntiAliasing( sal_Bool bState )
{
if(m_bAntiAliasing != bState)
{
m_bAntiAliasing = bState;
SetModified();
}
}
// #i97672# selection settings
sal_Bool SvtOptionsDrawinglayer_Impl::IsTransparentSelection() const
{
return m_bTransparentSelection;
}
void SvtOptionsDrawinglayer_Impl::SetTransparentSelection( sal_Bool bState )
{
if(m_bTransparentSelection != bState)
{
m_bTransparentSelection = bState;
SetModified();
}
}
void SvtOptionsDrawinglayer_Impl::SetTransparentSelectionPercent( sal_uInt16 nPercent )
{
if(m_nTransparentSelectionPercent != nPercent)
{
m_nTransparentSelectionPercent = nPercent;
SetModified();
}
}
sal_uInt16 SvtOptionsDrawinglayer_Impl::GetTransparentSelectionPercent() const
{
return m_nTransparentSelectionPercent;
}
sal_uInt16 SvtOptionsDrawinglayer_Impl::GetSelectionMaximumLuminancePercent() const
{
return m_nSelectionMaximumLuminancePercent;
}
//*****************************************************************************************************************
// private method
//*****************************************************************************************************************
Sequence< OUString > SvtOptionsDrawinglayer_Impl::impl_GetPropertyNames()
{
// Build list of configuration key names.
const OUString pProperties[] =
{
PROPERTYNAME_OVERLAYBUFFER ,
PROPERTYNAME_PAINTBUFFER ,
PROPERTYNAME_STRIPE_COLOR_A ,
PROPERTYNAME_STRIPE_COLOR_B ,
PROPERTYNAME_STRIPE_LENGTH ,
// #i73602#
PROPERTYNAME_OVERLAYBUFFER_CALC,
PROPERTYNAME_OVERLAYBUFFER_WRITER,
PROPERTYNAME_OVERLAYBUFFER_DRAWIMPRESS,
// #i74769#, #i75172#
PROPERTYNAME_PAINTBUFFER_CALC,
PROPERTYNAME_PAINTBUFFER_WRITER,
PROPERTYNAME_PAINTBUFFER_DRAWIMPRESS,
// #i4219#
PROPERTYNAME_MAXIMUMPAPERWIDTH,
PROPERTYNAME_MAXIMUMPAPERHEIGHT,
PROPERTYNAME_MAXIMUMPAPERLEFTMARGIN,
PROPERTYNAME_MAXIMUMPAPERRIGHTMARGIN,
PROPERTYNAME_MAXIMUMPAPERTOPMARGIN,
PROPERTYNAME_MAXIMUMPAPERBOTTOMMARGIN,
// primitives
PROPERTYNAME_ANTIALIASING,
PROPERTYNAME_SNAPHORVERLINESTODISCRETE,
PROPERTYNAME_SOLIDDRAGCREATE,
PROPERTYNAME_RENDERDECORATEDTEXTDIRECT,
PROPERTYNAME_RENDERSIMPLETEXTDIRECT,
PROPERTYNAME_QUADRATIC3DRENDERLIMIT,
PROPERTYNAME_QUADRATICFORMCONTROLRENDERLIMIT,
// #i97672# selection settings
PROPERTYNAME_TRANSPARENTSELECTION,
PROPERTYNAME_TRANSPARENTSELECTIONPERCENT,
PROPERTYNAME_SELECTIONMAXIMUMLUMINANCEPERCENT
};
// Initialize return sequence with these list ...
const Sequence< OUString > seqPropertyNames( pProperties, PROPERTYCOUNT );
// ... and return it.
return seqPropertyNames;
}
//*****************************************************************************************************************
// initialize static member
// DON'T DO IT IN YOUR HEADER!
// see definition for further information
//*****************************************************************************************************************
SvtOptionsDrawinglayer_Impl* SvtOptionsDrawinglayer::m_pDataContainer = NULL;
sal_Int32 SvtOptionsDrawinglayer::m_nRefCount = 0;
//*****************************************************************************************************************
// constructor
//*****************************************************************************************************************
SvtOptionsDrawinglayer::SvtOptionsDrawinglayer()
{
// Global access, must be guarded (multithreading!).
MutexGuard aGuard( GetOwnStaticMutex() );
// Increase our refcount ...
++m_nRefCount;
// ... and initialize our data container only if it not already!
if( m_pDataContainer == NULL )
{
m_pDataContainer = new SvtOptionsDrawinglayer_Impl();
}
}
//*****************************************************************************************************************
// destructor
//*****************************************************************************************************************
SvtOptionsDrawinglayer::~SvtOptionsDrawinglayer()
{
// Global access, must be guarded (multithreading!)
MutexGuard aGuard( GetOwnStaticMutex() );
// Decrease our refcount.
--m_nRefCount;
// If last instance was deleted ...
// we must destroy our static data container!
if( m_nRefCount <= 0 )
{
delete m_pDataContainer;
m_pDataContainer = NULL;
}
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtOptionsDrawinglayer::IsOverlayBuffer() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsOverlayBuffer();
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_Bool SvtOptionsDrawinglayer::IsPaintBuffer() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsPaintBuffer();
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
Color SvtOptionsDrawinglayer::GetStripeColorA() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetStripeColorA();
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
Color SvtOptionsDrawinglayer::GetStripeColorB() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetStripeColorB();
}
//*****************************************************************************************************************
// public method
//*****************************************************************************************************************
sal_uInt16 SvtOptionsDrawinglayer::GetStripeLength() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetStripeLength();
}
// #i73602#
sal_Bool SvtOptionsDrawinglayer::IsOverlayBuffer_Calc() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsOverlayBuffer_Calc();
}
sal_Bool SvtOptionsDrawinglayer::IsOverlayBuffer_Writer() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsOverlayBuffer_Writer();
}
sal_Bool SvtOptionsDrawinglayer::IsOverlayBuffer_DrawImpress() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsOverlayBuffer_DrawImpress();
}
// #i74769#, #i75172#
sal_Bool SvtOptionsDrawinglayer::IsPaintBuffer_Calc() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsPaintBuffer_Calc();
}
sal_Bool SvtOptionsDrawinglayer::IsPaintBuffer_Writer() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsPaintBuffer_Writer();
}
sal_Bool SvtOptionsDrawinglayer::IsPaintBuffer_DrawImpress() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsPaintBuffer_DrawImpress();
}
// #i4219#
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperWidth() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperWidth();
}
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperHeight() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperHeight();
}
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperLeftMargin() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperLeftMargin();
}
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperRightMargin() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperRightMargin();
}
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperTopMargin() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperTopMargin();
}
sal_uInt32 SvtOptionsDrawinglayer::GetMaximumPaperBottomMargin() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetMaximumPaperBottomMargin();
}
// helper
sal_Bool SvtOptionsDrawinglayer::IsAAPossibleOnThisSystem() const
{
return m_pDataContainer->IsAAPossibleOnThisSystem();
}
// primitives
sal_Bool SvtOptionsDrawinglayer::IsAntiAliasing() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsAntiAliasing() && IsAAPossibleOnThisSystem();
}
sal_Bool SvtOptionsDrawinglayer::IsSnapHorVerLinesToDiscrete() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsAntiAliasing() && m_pDataContainer->IsSnapHorVerLinesToDiscrete();
}
sal_Bool SvtOptionsDrawinglayer::IsSolidDragCreate() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsSolidDragCreate();
}
sal_Bool SvtOptionsDrawinglayer::IsRenderDecoratedTextDirect() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsRenderDecoratedTextDirect();
}
sal_Bool SvtOptionsDrawinglayer::IsRenderSimpleTextDirect() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsRenderSimpleTextDirect();
}
sal_uInt32 SvtOptionsDrawinglayer::GetQuadratic3DRenderLimit() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetQuadratic3DRenderLimit();
}
sal_uInt32 SvtOptionsDrawinglayer::GetQuadraticFormControlRenderLimit() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->GetQuadraticFormControlRenderLimit();
}
void SvtOptionsDrawinglayer::SetAntiAliasing( sal_Bool bState )
{
MutexGuard aGuard( GetOwnStaticMutex() );
m_pDataContainer->SetAntiAliasing( bState );
}
// #i97672# selection settings
sal_Bool SvtOptionsDrawinglayer::IsTransparentSelection() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
return m_pDataContainer->IsTransparentSelection();
}
void SvtOptionsDrawinglayer::SetTransparentSelection( sal_Bool bState )
{
MutexGuard aGuard( GetOwnStaticMutex() );
m_pDataContainer->SetTransparentSelection( bState );
}
sal_uInt16 SvtOptionsDrawinglayer::GetTransparentSelectionPercent() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
sal_uInt16 aRetval(m_pDataContainer->GetTransparentSelectionPercent());
// crop to range [10% .. 90%]
if(aRetval < 10)
{
aRetval = 10;
}
if(aRetval > 90)
{
aRetval = 90;
}
return aRetval;
}
void SvtOptionsDrawinglayer::SetTransparentSelectionPercent( sal_uInt16 nPercent )
{
MutexGuard aGuard( GetOwnStaticMutex() );
// crop to range [10% .. 90%]
if(nPercent < 10)
{
nPercent = 10;
}
if(nPercent > 90)
{
nPercent = 90;
}
m_pDataContainer->SetTransparentSelectionPercent( nPercent );
}
sal_uInt16 SvtOptionsDrawinglayer::GetSelectionMaximumLuminancePercent() const
{
MutexGuard aGuard( GetOwnStaticMutex() );
sal_uInt16 aRetval(m_pDataContainer->GetSelectionMaximumLuminancePercent());
// crop to range [0% .. 100%]
if(aRetval > 90)
{
aRetval = 90;
}
return aRetval;
}
Color SvtOptionsDrawinglayer::getHilightColor() const
{
Color aRetval(Application::GetSettings().GetStyleSettings().GetHighlightColor());
const basegfx::BColor aSelection(aRetval.getBColor());
const double fLuminance(aSelection.luminance());
const double fMaxLum(GetSelectionMaximumLuminancePercent() / 100.0);
if(fLuminance > fMaxLum)
{
const double fFactor(fMaxLum / fLuminance);
const basegfx::BColor aNewSelection(
aSelection.getRed() * fFactor,
aSelection.getGreen() * fFactor,
aSelection.getBlue() * fFactor);
aRetval = Color(aNewSelection);
}
return aRetval;
}
namespace
{
class theOptionsDrawinglayerMutex : public rtl::Static<osl::Mutex, theOptionsDrawinglayerMutex>{};
}
//*****************************************************************************************************************
// private method
//*****************************************************************************************************************
Mutex& SvtOptionsDrawinglayer::GetOwnStaticMutex()
{
return theOptionsDrawinglayerMutex::get();
}
/* vim:set shiftwidth=4 softtabstop=4 expandtab: */